Scribd
Upload
70 views3 pages

R1 R2 Conf T Int Fa0/0 No Shutdown Exit

The document contains configurations for routers R1 through R4 to establish OSPF routing and MPLS LDP connectivity between their interfaces. Interface and OSPF configurations are shown for each router.

Uploaded by

MARIA BERONICA BONILLA GOMEZ
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
70 views3 pages

R1 R2 Conf T Int Fa0/0 No Shutdown Exit

The document contains configurations for routers R1 through R4 to establish OSPF routing and MPLS LDP connectivity between their interfaces. Interface and OSPF configurations are shown for each router.

Uploaded by

MARIA BERONICA BONILLA GOMEZ
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 3

R1 R2

conf t conf t
int fa0/0 int fa0/0
ip address 10.10.0.2 255.255.255.252ip address 10.10.3.2 255.255.255.252
no shutdown no shutdown
exit exit
int fa1/0 int fa1/0
ip address 10.10.3.1 255.255.255.252ip address 10.10.4.1 255.255.255.252
no shu no shu
exit exit
interface loopback 0 interface loopback 0
ip address 1.1.1.1 255.255.255.255 ip address 2.2.2.2. 255.255.255.255
router ospf 1 router ospf 1
router-id 1.1.1.1 router-id 2.2.2.2
network 10.10.0.2 0.0.0.255 area 0 network 10.10.3.2 2 0.0.0.255 area 0
network 10.10.3.1 0.0.0.255 area 0 network 10.10.4.1 0.0.0.255 area 0
network 1.1.1.1 0.0.0.255 area 0 network 2.2.2.2 0.0.0.255 area 0
end exit
copy running-config startup-config copy running-config startup-config

interface loopback 0
ip address 1.1.1.1 255.255.255.255 ip address 1.1.1.1 255.255.255.255
conf t conf t
router ospf 1
mpls ldp autoconfig area 0
end
R3 R4
conf t conf t
int fa0/0 int fa0/0
ip address 192.168.1.1 255.255.255.0ip address 10.10.4.2 255.255.255.252
no shutdown no shutdown
exit exit
int fa1/0 int fa1/0
ip address 10.10.0.1 255.255.255.252ip address 162.168.1.1 255.255.255.0
no shu no shu
exit exit

conf t conf t
router ospf 1 router ospf 1
router-id 3.3.3.3 router-id 4.4.4.4
network 192.168.1.1 0.0.0.255 area 0network 10.10.4.2 0.0.0.255 area 0
network 10.10.0.1 0.0.0.255 area 0 network 162.168.1.1 0.0.0.255 area 0
network 3.3.3.3 0.0.0.255 area 0 network 4.4.4.4 0.0.0.255 area 0
exit exit
copy running-config startup-config
SH MPLS LDP NEIG

ip address 1.1.1.1 255.255.255.255


conf t conf t

R3#copy running-config st
R3#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
R3#
mpls label protocol?

startup-config
artup-config]?

You might also like