(Format for the Project Report)

Sample Sheet (Title Page/Front Page)

A Major/Minor Project
on

NAME OF THE PROJECT (14 PT.)

SUBMITTED IN PARTIAL FULFILLMENT OF THE REQUIREMENT FOR THE AWARD

OF THE DEGREE OF (12pt.)

BACHELOR OF TECHNOLOGY(14 pt.)

(Electrical Engineering) (14pt.)

College Logo

AUG-DEC 2014(14 pt.)

SUBMITTED BY: UNDER THE GUIDANCE OF:

NAME(S) : NAME: NAME OF THE PROJECT

UNIVERSITY ROLL NO.(s) : GUIDE DESIGNATION:

(12pt.) (12pt.)

DEPARTMENT OF ELECTRICAL ENGINEERING (12pt.)

BABA BANDA SINGH BAHADUR ENGINEERING COLLEGE,

1. The report shall be computer typed (English- British, Font -Times Roman, Size-12

point, Double spacing between lines) and printed on A4 size paper.

2. The report shall be hard bound with cover page in white color. The name of the

candidate, degree, session, college name shall be printed in black on the cover [Refer

sample sheet (title Page/front page)].

3. The report shall be typed on one side only with double space with a margin 3.5 cm on

the left, 2.5 cm on the top, and 1.25 cm on the right and at bottom.

4. In the report, the title page [Refer sample sheet (title Page/front page)] should be given

first then the Candidate‟s declaration, followed by an abstract of the report (not

exceeding one page). This should be followed by the acknowledgment, list of figures/list of

tables, notations/nomenclature, and then contents with page nos.

5. The diagrams should be printed on a light/white background, Tabular matter should be

clearly arranged and the font of the Tabular matter should be Font -Times Roman, Size-

10 point, Single spacing between lines. Decimal point may be indicated by full stop(.). The

caption for figure must be given at the BOTTOM(center aligned) of the figure and

Caption for the Table must be given at the TOP(center aligned) of the Table. The font for

the captions should be Times Roman, Italics, Size-10 point.

6. The font for the chapter titles should be Times Roman, Bold, Capital, Size-16 point and

center aligned. The font for the Headings should be Times Roman, Bold, and Size-14

point. The font for the sub-headings should be Times Roman, Bold, and Size-12 point.
7. Equations should be numbered as 1.1, 1.2, 1.3 etc in chapter 1. Similarly as 2.1, 2.2, 2.3

etc in chapter 2 and so on.

8. Figures should be numbered as Figure1.1, Figure 1.2, Figure 1.3 etc in chapter 1.

Similarly as Figure 2.1, Figure 2.2, Figure 2.3 etc in chapter 2 and so on.

9. Tables should be numbered as Table 1.1, Table 1.2, Table 1.3 etc in chapter 1.

Similarly as Table 2.1, Table 2.2, Table 2.3 etc in chapter 2 and so on.
10. Conclusions and future scope each must not exceed more than one page.

11. The graphs (optional) should be combined for the same parameters for proper

comparison. Single graph should be avoided as far as possible.

12. The project report must consist of following chapters:

[Chapter-1] Introduction & Project Formulation

[Chapter-2] Project Design

[Chapter-3] Development and Implementation

[Chapter-4] Conclusion and Future Scope

13. References (For style of references follow the instructions attached)

14. Appendix (Any additional information regarding Project)

15. The report must be duly signed by the Project Guide.

16. Paste a CD containing the soft copy of Report (in Docx and PDF), Reference papers and

other material related to the work, on the inner side of back hard cover.

17. Student has to submit the hardware related to the project at the time of viva-voce.
 Sample sheet -
Declaration

BABA BANDA SINGH BAHADUR ENGINEERING COLLEGE,

CANDIDATE'S DECLARATION

I hereby certify that the work which is being presented in the Project entitled “TITLE”

by “NAME OF THE STUDENT” in partial fulfillment of requirements for the award of

degree of B.Tech. (Electrical Engineering) submitted to the Department of Electrical

Engineering at BABA BANDA SINGH BAHADUR ENGINEERING COLLEGE,

FATEHGARH SAHIB is an authentic record of my own work carried out during a

period from ______ to _______. The matter presented in this project has not been

submitted by me or anybody else in any other University / Institute for the award of

B.Tech Degree.

Signature of the Student

This is to certify that the above statement made by the candidate is correct to the best of my
own knowledge.

(Signature of Project Guide/Guides)

The Major Project Viva–Voce Examination of__________________ has been held on

Signature of Internal Examiner Signature of External Examiner

CONTENTS
Topic Page No.

ii
Acknowledgement iii
List of Figures iv
CHAPTER 1 INTRODUCTION & PROJECT vi
FORMULATION 1-19
1.1 Overview 1
1.2
1.3User requirement analysis 7
1.4 Feasibility Study B 14
1.5 Objectives of Project (Must be clearly, precisely defined and
implementation
must be done.) 16
CHAPTER 2 PROJECT DESIGN 20-__
2.1 Project perspective 20
2.2 Project functions __
2.3
2.4 Constraints __
2.5 Methodology __
2.6 Equipment and apparatus required __
2.7 Assumptions and Dependencies __
2.8 Specific Requirements __
CHAPTER 3 DEVELOPMENT AND IMPLEMENTATION __-__
3.1 Introduction to tool (Software/ Hardware) __
3.2 Any other Supporting tool used __
3.3 Implementation using Screen Shots/Figures/Graphs (Each Figure/Graph must
be
3.4numbered and Description must be provided) __
CHAPTER 4 CONCLUSION AND FUTURE SCOPE __-__
4.1 Conclusion __
4.2 Future Scope __
REFERENCES __
APPENDIX (Any additional information regarding
Project) __
(Note: Page no.s for different topics in report may vary according to the
contents )