Scribd
Upload
71 views2 pages

Anergy Humidity Controller

The document describes a humidity controller that features an electronic microprocessor, a high polymer resistive humidity sensor, and selectable humidification or dehumidification output. It has high accuracy, fast response, and long life. The controller has an adjustable setting range of 30% to 80% relative humidity, a switching differential of 5%, and operates on 230V AC power with an output rating of 3 amps.

Uploaded by

Dtl Saroz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
71 views2 pages

Anergy Humidity Controller

The document describes a humidity controller that features an electronic microprocessor, a high polymer resistive humidity sensor, and selectable humidification or dehumidification output. It has high accuracy, fast response, and long life. The controller has an adjustable setting range of 30% to 80% relative humidity, a switching differential of 5%, and operates on 230V AC power with an output rating of 3 amps.

Uploaded by

Dtl Saroz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

HUMIDITY CONTROLLER

FEATURES

• Electronic, Microprocessor based


• High polymer resistive sensor
• Selectable humidification /
dehumidification output

HR-1310

BENEFITS

• High accuracy
• Fast response
• Long life

TECHNICAL DATA
Setting Range : 30% to 80% rh adjustable
Switching Differential : 5% rh
Sensing Element : High polymer resistive
Accuracy : ± 5% rh
Operating Voltage : 230V AC ±10%, 50/60 Hz
Output rating at 24/240V AC : 3 Amps
Terminals : Accept Max. 2.5sq. mm cable
Permissible ambient Temp. : -20° to +40o C
Protection : IP 30
0307
MODEL DESIGNATION

HR -13 D

POWER SUPPLY SWITCH OPTIONS DISPLAY CONTROL OUTPUTS SPECIAL FEATURES #

1 = 230V AC, 50Hz, 1Ph 0 = No Switch X = None 2 = 2-position X = None


2 = 24V AC, 50Hz, 1Ph D = LED display 3 = 3-point

WIRING DIAGRAMS

HR 13 _ 0 X -2X *
24V AC / 230V AC

HUM/DEHUM 4

2
230V AC
1
08/13

NOTES : *applicable to models (E) with external sensor


Subject to technical alteration

You might also like