Scribd Logo
Upload

Welcome to Scribd!

  • 62 views

    Design and Fabrication of Wall Painting System Part1

    Uploaded by

    gokul outlander
    This document describes the design and fabrication of an automatic wall painting system. It aims to develop a low-cost painting equipment to reduce human effort and hazards. The system uses components like a DC motor, air compressor, transformer, nozzle, microcontroller, IR sensors, resistor, capacitor and spray gun. It is powered by an air compressor and controlled by a microcontroller. The IR sensors help navigate the system and adjust the distance from walls during painting. The overall goal is to create a simple, easy to use and low-cost automatic wall painting solution.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Design and Fabrication of Wall Painting System Part1

    Uploaded by

    gokul outlander
    62 views7 pages
    This document describes the design and fabrication of an automatic wall painting system. It aims to develop a low-cost painting equipment to reduce human effort and hazards. The system uses components like a DC motor, air compressor, transformer, nozzle, microcontroller, IR sensors, resistor, capacitor and spray gun. It is powered by an air compressor and controlled by a microcontroller. The IR sensors help navigate the system and adjust the distance from walls during painting. The overall goal is to create a simple, easy to use and low-cost automatic wall painting solution.

    Original Description:

    painting machine

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document describes the design and fabrication of an automatic wall painting system. It aims to develop a low-cost painting equipment to reduce human effort and hazards. The system uses components like a DC motor, air compressor, transformer, nozzle, microcontroller, IR sensors, resistor, capacitor and spray gun. It is powered by an air compressor and controlled by a microcontroller. The IR sensors help navigate the system and adjust the distance from walls during painting. The overall goal is to create a simple, easy to use and low-cost automatic wall painting solution.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    62 views7 pages

    Design and Fabrication of Wall Painting System Part1

    Uploaded by

    gokul outlander
    This document describes the design and fabrication of an automatic wall painting system. It aims to develop a low-cost painting equipment to reduce human effort and hazards. The system uses components like a DC motor, air compressor, transformer, nozzle, microcontroller, IR sensors, resistor, capacitor and spray gun. It is powered by an air compressor and controlled by a microcontroller. The IR sensors help navigate the system and adjust the distance from walls during painting. The overall goal is to create a simple, easy to use and low-cost automatic wall painting solution.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 7

    DESIGN AND FABRICATION OF WALL PAINTING SYSTEM

    A PROJECT REPORT
    Submitted by

    HARIKARAN.G (ADM17016L)
    GOKUL .V (ADM17011)

    In partial fulfillment for the requirements for the

    award of

    DIPLOMA IN
    MECHANICAL ENGINEERING

    ACADEMY OF MARITIME EDUCATION AND TRAINING


    CHENNAI 603112
    NOVEMBER 2019
    AMET: CHENNAI 603112

    i
    BONAFIDE CERTIFICATE

    This is to certify that this project report “DESING AND FABRICATION OF WALL

    PAINTING SYSTEM” is the bonafide work of “HARIKARAN G (ADM17016L) &

    GOIKUL V (ADM17011)” who carried out the project work under my supervision.

    DR.R.RAJAVEL Mr.S.K.KRISHNA KUMAR


    HEAD OF THE DEPARTMENT SUPERVISOR
    DEPARTMENT OF MECHANICAL ASSISTANT PROFESSOR
    ENGINEERING DEPARTMENT OF MECHANAL
    AMET UNIVERSITY ENGINEERING
    CHENNAI-603112 AMET UNIVERSITY
    CHENNAI-603112

    Project Viva-Voice Examination Held On ……………………………………

    INTERNAL EXAMINER EXTERNAL EXAMINER

    ii
    ABSTRACT

    The primary aim of the project is to design, develop and implement of Wall Painting
    system which helps to achieve low cost painting equipment. Despite the advances in
    robotics and its wide spreading applications, interior wall painting has shared little in
    research activities. The painting chemicals can cause hazards to the human painters
    such as eye and respiratory system problems. When construction workers and robots
    are properly integrated in building tasks, the whole construction process can be better
    managed and savings in human labour and timing are obtained as a consequence. In
    addition, it would offer the opportunity to reduce or eliminate human exposure to
    difficult and hazardous environments, which would solve most of the problems
    connected with safety when many activities occur at the same time.

    Painting had been automated in most of automotive industry but not yet for the
    construction industry and also for the house wall painting. The design objective is to
    fulfill the foundation of simplicity, easy handling, low cost, reducing human effort
    and constant painting. IR sensors are fitted to adjust the distance limits and
    maneuver in the room area. Also plan to move the base in horizontal direction It save
    labour work, cost and saving human labour. It would get the opportunity to reduce or
    eliminate human infection. It solve most of the problem with safety when lots of
    activities occur at the same time. This project motivate the development of automatic
    wall painting system.

    Keyword: Automatic Wall Painting Machine, DC Motor, Spray Painting, Spray


    Gun,Chain, Chain Sprocket, Boring and Exhausting techniques, IR
    sensor, Construction field
    iii
    ACKNOWLEDGEMENT

    I would like to extend my thanks to the people who are all so generously

    contributed to the work presented in this project report.

    I wish to express my heartfelt gratitude and indebtedness to Dr. J.

    RAMACHANDRAN, Chancellor, AMET, for his help in carrying out my

    project work at AMET.

    I wish to express my heartfelt gratitude and great thanks for Col. Dr. G.

    THIRUVASAGAM, Vice Chancellor, AMET, for his valuable support

    throughout the course of my design and fabrication project work at AMET.

    I am also grateful to Dr. R. RAJAVEL, Head of the Department, Department of

    Mechanical Engineering, for his help in getting me this project.

    I take this opportunity to express my deep sense of gratitude to my supervisor,

    coordinator Mr.S.K.KRISHNA KUMAR Assistant Professor, Department of

    Mechanical Engineering, AMET for his valuable guidance during my

    investigation and in writing the project report.

    I also thank my friends and classmates for their help.

    iv
    TABLE OF CONTENTS

    CHAPTER TABLE PAGE.NO

    - ABSTRACT III

    - LIST OF FIGURES VII

    I INTRODUCTION 1

    II LITERATURE SURVEY 2

    III OBJECTIVE 4

    IV METHODOLOGY 5

    EXPREMENTAL WORK

    1.1 CONVENTIONAL OF PAINTING 6


    1.2 PAINTING SPRAY 7
    1.3 WORKIMG PRINCIPLE 8
    1.4 CONSTRUCTION AND DESCRIPTION 10
    1.4.1 DCMOTOR 11
    1.4.2 AIR COMPRESSOR 12
    V
    1.4.3 TRANSFORMER 13
    1.4.4 NOZZLE 14
    1.4.5 MICROCONTROLLER 15
    1.4.6 IR SENSOR 16
    1.4.7 RESISTOR 17
    1.4.8 CAPACITOR 18
    1.4.9 SPRAY GUN 19
    1.4.10 PULLETY 20
    1.4.11 BLOCK DIAGRAM 21
    v
    VI MATERIAL SELECTION 22

    VII PROBLEM DEFINITION 23

    VIII CONCLUSION 24

    IX ADVANTAGES AND APPLICATIONS 25

    X REFERENCE 26

    vi
    LIST OF FIGURES

    S.NO TITLE PAGE NO.

    1.1 CONVENTIONAL OF PAINTING 6

    1.2 PAINTING SPRAY 7

    1.3 ACTUAL WALL PAINTING SYSTEM 9

    1.4.1 DC MOTOR 11

    1.4.2 AIR COMPRESSOR 12

    1.4.3 TANSFORMER 13

    1.4.4 NOZZEL 14

    1.4.5 MICROCONTROLLER 15

    1.4.6 IR SENSOR 16

    1.4.7 RESISTOR 17

    1.4.8 CAPACITOR 18

    1.4.9 SPRAY GUN 19

    1.4.10 PULLEY 20

    1.4.11 WORKING DIAGRAM 21

    vii

    You might also like