Scribd Logo
Upload

Welcome to Scribd!

  • 107 views

    Tufchem R II Membrane

    Uploaded by

    hungdeveling
    TUFCHEM (r) II membrane is a chemically cured, elastomeric urethane asphalt membrane. It can be used as a stand alone lining to protect metal, concrete, and masonry substrates. It is not recommended where oils or organic solvents are present.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Tufchem R II Membrane

    Uploaded by

    hungdeveling
    107 views2 pages
    TUFCHEM (r) II membrane is a chemically cured, elastomeric urethane asphalt membrane. It can be used as a stand alone lining to protect metal, concrete, and masonry substrates. It is not recommended where oils or organic solvents are present.

    Original Title

    Tufchem r II Membrane(2)

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    TUFCHEM (r) II membrane is a chemically cured, elastomeric urethane asphalt membrane. It can be used as a stand alone lining to protect metal, concrete, and masonry substrates. It is not recommended where oils or organic solvents are present.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    107 views2 pages

    Tufchem R II Membrane

    Uploaded by

    hungdeveling
    TUFCHEM (r) II membrane is a chemically cured, elastomeric urethane asphalt membrane. It can be used as a stand alone lining to protect metal, concrete, and masonry substrates. It is not recommended where oils or organic solvents are present.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    CE-196

    08/04 Supersedes 05/00


    TUFCHEM ® II MEMBRANE
    DESCRIPTION

    TUFCHEM II Membrane is a chemically cured, elastomeric urethane asphalt membrane.


    It can be used as a stand alone lining to protect metal, concrete, and masonry substrates
    from chemical attack and physical abrasion within its limitations. TUFCHEM II can also
    be used as an underlying membrane in conjunction with chemical-resistant masonry or
    polymer concrete overlayments. TUFCHEM II is generally specified to be installed in 2 or
    3 passes for a total nominal 80-125 mil WFT lining thickness. For concrete substrates, use
    with PENNTROWEL® Epoxy Primer (CE-139). On steel substrates, no primer is required
    for adhesion, but PENNGUARD Block Primer (CE-227) is recommended to prevent re-
    rusting of the blasted surface. For complete installation instructions, consult
    Corrosion Engineering installation specifications CES 326 and CES 334.

    AREAS OF USE

    TUFCHEM II provides a positive barrier to structures from corrosive chemicals, gases, and
    moisture. Depending on the environment, it may be used as a lining for concrete or steel
    tanks, sumps, or stacks, or as part of a lining system in combination with chemical-
    resistant brickwork, inorganic monolithic linings or polymer concretes for floors, wet
    scrubber ductwork, vessels and tanks, etc. It is not recommended where oils or organic
    solvents are present. Typical applications include both interior and exterior chemical
    containment linings, clarifiers, thickeners, and tank linings. TUFCHEM II Membrane has
    also been successfully used to do emergency field repairs to sheet rubber membrane
    linings.

    OUTSTANDING FEATURES

    • Cold applied by trowel, squeegee or brush.

    • Rubber like texture provides very good physical abrasion resistance.

    • Remains elastomeric to temperatures as low as -40°F (-40°C). High elongation can


    accommodate movement caused by thermal and mechanical stresses.

    • Provides an excellent barrier to water vapor.

    • Will bridge hairline cracks in concrete and masonry construction.


    TUFCHEM ® II MEMBRANE CE-196
    08/04 SUPERSEDES 05/00 PAGE 2 OF 2

    TYPICAL PHYSICAL PROPERTIES

    PROPERTY TUFCHEM II Membrane

    Color and Appearance Black elastomeric rubber


    Elongation at 74°F (fully cured) (ASTM D412) 147%
    Bond Strength to Carbon Steel (ASTM D412) 135 psi (0.93 MPa)
    Tensile Strength at 74°F (fully cured) (ASTM D412) 216 psi (1.5 MPa)
    Modulus of Elasticity @ 100% Elongation (ASTM D412) 60 psi (0.4 MPa)
    Abrasion Resistance to Sandblasting (FED-TT-C-520) Excellent

    Service Temperature - If directly exposed -40"F to 140"F (-40"C to 66"C)


    - behind chemical-resistant masonry / -40"F to 200"F (-40"C to 93"C)
    monolithic
    Permeance (ASTM C96, Method E) 0.245 Perms

    Mix Ratio - Component A : Component B 62:1 by weight

    Pot Life (Approximately) 45 to 60 min @ 70"F (21"C)

    ESTIMATING / PACKAGING THEORETICAL QUANTITIES - NO OVERAGE ALLOWANCE

    PRODUCT CODE PACKAGING COVERAGE

    TUFCHEM II 19683 4 Gallon unit 50 SF per 4 gal unit @125 mils WFT
    75 SF per 4 gal unit @ 90 mils WFT
    TUFCHEM II 7060-40 4 Gallon unit 100 SF per 4 gal unit @ 60 mils WFT
    (for air freight shipments)

    SAFETY PRECAUTIONS

    The components of TUFCHEM II Membrane and mixes of them present a number of hazards. Before
    using, read the precautions and First Aid directions on the individual labels on the containers and in each
    product’s Material Safety Data Sheet, and the follow the noted hazardous information.

    USE THIS REFERENCE AS A GUIDE ONLY. THE INFORMATION IS BELIEVED TO BE RELIABLE,


    BUT NO GUARANTEE IS MADE NOR DO WE ASSUME LIABILITY IN CONNECTION WITH ITS USE.
    PLEASE CONTACT CORROSION ENGINEERING DEPARTMENT FOR SPECIFIC
    RECOMMENDATIONS AT (610) 239-1500 OR FAX (610) 239-1519.

    www.tufchem.com

    You might also like