Little Bit of Morse Code History From Wikip

[EDIT] Morse code - Wikipedia https://en.wikipedia.
org/wiki/Morse_code
Morse code
Morse code is a character encoding scheme used in
telecommunication that encodes text characters as standardized
sequences of two different signal durations called dots and dashes or
dits and dahs.[2][3] Morse code is named for Samuel F. B. Morse, an
inventor of the telegraph.
The International Morse Code encodes the 26 English letters A through

Z, some non-English letters, the Arabic numerals and a small set of
punctuation and procedural signals (prosigns). There is no distinction
between upper and lower case letters.[1] Each Morse code symbol is
formed by a sequence of dots and dashes. The dot duration is the basic
unit of time measurement in Morse code transmission. The duration of a
dash is three times the duration of a dot. Each dot or dash within a
character is followed by period of signal absence, called a space, equal to
the dot duration. The letters of a word are separated by a space of
duration equal to three dots, and the words are separated by a space
equal to seven dots.[1] To increase the efficiency of encoding, Morse code
was designed so that the length of each symbol is approximately inverse
to the frequency of occurrence in text of the English language character
that it represents. Thus the most common letter in English, the letter
"E", has the shortest code: a single dot. Because the Morse code Chart of the Morse code 26 letters and 10
elements are specified by proportion rather than specific time durations, numerals.[1]
the code is usually transmitted at the highest rate that the receiver is
capable of decoding. The Morse code transmission rate (speed) is
specified in groups per minute, commonly referred to as words per minute.[4]
Morse code is usually transmitted by on-off keying of an information-carrying medium such as electric current, radio waves, visible
light, or sound waves.[5][6] The current or wave is present during the time period of the dot or dash and absent during the time
between dots and dashes.[7][8]
Morse code can be memorized, and Morse code signalling in a form perceptible to the human senses, such as sound waves or visible
light, can be directly interpreted by persons trained in the skill.[9][10]
Because many non-English natural languages use other than the 26 Roman letters, Morse alphabets have been developed for those
languages.[11]
In an emergency, Morse code can be generated by improvised methods such as turning a light on
and off, tapping on an object or sounding a horn or whistle, making it one of the simplest and most
SOS, the standard
emergency signal, is a versatile methods of telecommunication. The most common distress signal is SOS – three dots,
Morse code prosign three dashes, and three dots – internationally recognized by treaty.
Development and history
1 of 20 11/15/2019, 7:21 AM
[EDIT] Morse code - Wikipedia https://en.wikipedia.org/wiki/Morse_code
Early in the nineteenth century, European

experimenters made progress with electrical
signaling systems, using a variety of
techniques including static electricity and
electricity from Voltaic piles producing
electrochemical and electromagnetic
changes. These numerous ingenious
experimental designs were precursors to
practical telegraphic applications.[12]
Following the discovery of electromagnetism Telegraph key and sounder. The

by Hans Christian Ørsted in 1820 and the signal is "on" when the knob is
pressed, and "off" when it is
invention of the electromagnet by William
released. Length and timing of the
Single needle telegraph instrument Sturgeon in 1824, there were developments
dots and dashes are entirely
in electromagnetic telegraphy in Europe and controlled by the telegraphist.
America. Pulses of electric current were sent
along wires to control an electromagnet in the receiving instrument. Many of the earliest
telegraph systems used a single-needle system which gave a very simple and robust instrument. However, it was slow, as the
receiving operator had to alternate between looking at the needle and writing down the message. In Morse code, a deflection of the
needle to the left corresponded to a dot and a deflection to the right to a dash.[13] By making the two clicks sound different with one
ivory and one metal stop, the single needle device became an audible instrument, which led in turn to the Double Plate Sounder
System.[14]
The American artist Samuel F. B. Morse, the American physicist Joseph Henry, and
Alfred Vail developed an electrical telegraph system. It needed a method to transmit
natural language using only electrical pulses and the silence between them. Around
1837, Morse, therefore, developed an early forerunner to the modern International
Morse code. William Cooke and Charles Wheatstone in Britain developed an electrical
telegraph that used electromagnets in its receivers. They obtained an English patent in
June 1837 and demonstrated it on the London and Birmingham Railway, making it the
first commercial telegraph. Carl Friedrich Gauss and Wilhelm Eduard Weber (1833) as
well as Carl August von Steinheil (1837) used codes with varying word lengths for their
telegraphs. In 1841, Cooke and Wheatstone built a telegraph that printed the letters from Morse code receiver, recording on
a wheel of typefaces struck by a hammer.[15] paper tape
The Morse system for telegraphy, which was first used in about 1844, was designed to
make indentations on a paper tape when electric currents were received. Morse's original telegraph receiver used a mechanical
clockwork to move a paper tape. When an electrical current was received, an electromagnet engaged an armature that pushed a
stylus onto the moving paper tape, making an indentation on the tape. When the current was interrupted, a spring retracted the
stylus and that portion of the moving tape remained unmarked. Morse code was developed so that operators could translate the
indentations marked on the paper tape into text messages. In his earliest code, Morse had planned to transmit only numerals and to
use a codebook to look up each word according to the number which had been sent. However, the code was soon expanded by Alfred
Vail in 1840 to include letters and special characters so it could be used more generally. Vail estimated the frequency of use of
letters in the English language by counting the movable type he found in the type-cases of a local newspaper in Morristown.[16] The
shorter marks were called "dots" and the longer ones "dashes", and the letters most commonly used were assigned the shorter
sequences of dots and dashes. This code was used since 1844 and became known as Morse landline code or American Morse code.
In the original Morse telegraphs, the receiver's armature made a clicking noise as it moved in and out of position to mark the paper
tape. The telegraph operators soon learned that they could translate the clicks directly into dots and dashes, and write these down
by hand, thus making the paper tape unnecessary. When Morse code was adapted to radio communication, the dots and dashes
were sent as short and long tone pulses. It was later found that people become more proficient at receiving Morse code when it is
2 of 20 11/15/2019, 7:21 AM

Little Bit of Morse Code History From Wikip

Uploaded by

Copyright:

Available Formats

Little Bit of Morse Code History From Wikip

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Little Bit of Morse Code History From Wikip

Uploaded by

Copyright:

Available Formats

[EDIT] Morse code - Wikipedia https://en.wikipedia.

The International Morse Code encodes the 26 English letters A through

Development and history

Early in the nineteenth century, European

Following the discovery of electromagnetism Telegraph key and sounder. The

You might also like