DOCUMENT NO:

MECHANICAL DATA SHEET

IPB-OCS-KEA-MEC-DAT-0008
FUEL GAS FILTER OCS JOB NO. R1948
REFERENCE DRAWING NO :
KRISENERGY (APSARA) LTD Rev. Date Prep'd Revision
A 27/12/18 ES ISSUED FOR REVIEW PID No. IPB-OCS-KEA-PRO-P
0 01/02/19 ES ISSUED FOR CONSTRUCTION
PREP'D CHK'D APP'D

ES SS RR

Client : KRISENERGY (APSARA) LTD Project Title : INGENIUM II - PRODUCTION BARGE No Required : 2 Serial No. :
Location : Cambodia Apsara Block A Service : FUEL GAS Sheet No. : 3 of 3
Tag No : 45-F-01 A/B Vendor : Purchase Order No. :
PROCESS DESIGN CONDITIONS
1 CODE : ASME Section VIII Div. 1 7 DUTY : INTERMIT
2 SERVICE : Fuel Gas 8 PRESS. DROP MAX. ALLOW (CLEAN) psig
3 FLUID TYPE :
Gas 9 PRESS. DROP MAX. ALLOW (DIRTY) psig
4 FLOW RATE mmscfd 2 10 OVERALL MOLECULAR WEIGHT
5 FILTRATION EFFICIENCY REQ'D % 100 11 OVERALL DENSITY kg/m3 3.71
6 FILTRATION EFFICIENCY OFFERED % Note 1 12
LIQUID VISCOSITY cP 0.0123
OPERATING CONDITIONS
13 DESIGN PRESSURE barg 6.9 24 VESSEL SPECIFICATION IPB-OCS-KEA
14 DESIGN TEMPERATURE o
C 121 25 WELDING SPECIFICATION ASME
15 OPERATING PRESSURE barg 2.9 26 PAINT/COATING SPEC IPB-OCS-KEA
16 OPERATING TEMPERATURE C
o
73.2 27 LIFTING PROVISION REQ
17 FLUID FLOW mmscfd 2 28 VESSEL ORIENTATION VER
18 PERCENTAGE SOLIDS IN FLUID Note 1 29 DIMENSIONS :
19 NATURE OF SOLIDS Note 1 30 INSIDE DIAMETER mm N
20 SIEVE ANALYSIS OF SOLIDS Note 1 31 T/T LINE mm N
21 SETTLING VELOCITY OF SOLIDS m/s Note 1 32 THICKNESS mm N
22 PARTICLE SIZE microns 10 33 LIFTING & GROUNDING LUGS REQ
23 LIQUID REMOVAL EFFICIENCY % Note 1 34 LEGS & BASE PLATE SKIR
MECHANICAL DESIGN
35 MATERIALS OF CONSTRUCTION Carbon Steel 41 GASKETS YES
36 CORROSION ALLOWANCE mm 1.6 42 COVER YES
37 EXTRERNAL & INTERNAL COATING IPB-OCS-KEA-PIP-SPE-0006 43 COVER BOLTS & NUTS YES
38 INTERNAL TYPE & MATERIAL Note 1 44 LIFTING LUGS YES
39 SUPPORT TYPE BY SELF (NOZZLES) 45 GROUNDING LUGS YES
40 PIPING CONNECTION IPB-OCS-KEA-PIP-SPE-0001 46 NAME PLATE YES
CONNECTION SCHEDULE SKETCH
47 Mark Reqd. Size. Rating Facing
SCH SERVICE
48 No No. (inch) (#) Type
49 N1 1 4 150 RF WN 40 FUEL GAS INLET
50 N2 1 4 150 RF WN 40 FUEL GAS OUTLET
51 N3 1 2 150 RF WN 80 CLOSED DRAIN N7
52 N4 1 2 150 RF WN 80 CLOSED DRAIN
53 N5 1 2 150 RF WN 80 BRIDLE LG & LT
54 N6 1 2 150 RF WN 80 BRIDLE LG & LT
N8
55 N7 1 2 150 RF WN 80 BRIDLE LG & LT
56 N8 1 2 150 RF WN 80 BRIDLE LG & LT
57 N9 1 2 150 RF WN 80 PDT
N3
58 N10 1 2 150 RF WN 80 PDT
59 N11 1 2 150 RF WN 80 OPEN DRAIN
60 N12 1 2 150 RF WN 80 SS TUBING
N1
61 N13 1 2 150 RF WN 80 UC
62 N14 1 2 150 RF WN 80 SPARE
63 X1 1 2 - - STD VENT N13
N12
64 X2 1 24 - - STD ACCESS OPENING
65 M1 1 HOLD - - STD MANWAY C/W COVER, DAVIT & HINGE

N4
 DOCUMENT NO:
MECHANICAL DATA SHEET
IPB-OCS-KEA-MEC-DAT-0008
FUEL GAS FILTER OCS JOB NO. R1948
REFERENCE DRAWING NO :
KRISENERGY (APSARA) LTD Rev. Date Prep'd Revision
A 27/12/18 ES ISSUED FOR REVIEW PID No. IPB-OCS-KEA-PRO-P
0 01/02/19 ES ISSUED FOR CONSTRUCTION
PREP'D CHK'D APP'D

ES SS RR

X1
NOTES:
1 Vendor to confirm and advise
2 Vendor to determine and verify the thickness and guarantee them on strength.
X2
3 Vendor to determine type and material as per ASTM Standard.
4 Vendor to determine type of internals (i.e filter, etc) required by the process.
5 For the detail information of the vessel, Vendor shall comply to reference specification and international
codes and standard.
6 Vendor to provide quick release mechanism i.e bandlock
 REV.

IPB-OCS-KEA-MEC-DAT-0008 0

OCS JOB NO. R1948

PID No. IPB-OCS-KEA-PRO-PID-4510

APP'D CLIENT
DAVE/MARC/
RR
ROB
Serial No. :

DESIGN CONDITIONS
INTERMITEN
TBA
Note 1
25.72
at 57.3 oC
at 57.3 oC
ING CONDITIONS
IPB-OCS-KEA-MEC-SPE-0001
ASME Section IX
IPB-OCS-KEA-PIP-SPE-0006
REQUIRED
VERTICAL

Note 1
Note 1
Note 2
REQUIRED
SKIRT TYPE
ANICAL DESIGN
NO
NO
NO
NO
NO
NO
SKETCH

N14

N2

N9

N10

N5

N6
 REV.

IPB-OCS-KEA-MEC-DAT-0008 0

OCS JOB NO. R1948

PID No. IPB-OCS-KEA-PRO-PID-4510

APP'D CLIENT
DAVE/MARC/
RR
ROB
N6

N14