Question

Answer and Explanation

(Note: If you are not sure how to use access-list, please check out my access-list tutorial
at: http://www.9tut.com/access-list-tutorial, also some modifications about the access-list have been
reported so you should read the “Some modifications” section at the end of this question to
understand more. You can also download this sim to practice (open with Packet Tracer)
here: http://www.9tut.com/download/9tut.com_Access-list_sim2.pkt

Corp1>enable (you may enter “cisco” as it passwords here)

We should create an access-list and apply it to the interface which is connected to the Server LAN
because it can filter out traffic from both Sw-2 and Core networks. The Server LAN network has been
assigned addresses of 172.22.242.17 – 172.22.242.30 so we can guess the interface connected to
them has an IP address of 172.22.242.30 (.30 is the number shown in the figure). Use the “show
running-config” command to check which interface has the IP address of 172.22.242.30.

Corp1#show running-config
We learn that interface FastEthernet0/1 is the interface connected to Server LAN network. It is the
interface we will apply our access-list (for outbound direction).

Corp1#configure terminal

Our access-list needs to allow host C – 192.168.33.3 to the Finance Web Server 172.22.242.23 via
web (port 80)

Corp1(config)#access-list 100 permit tcp host 192.168.33.3 host 172.22.242.23 eq 80

Deny other hosts access to the Finance Web Server via web

Corp1(config)#access-list 100 deny tcp any host 172.22.242.23 eq 80

All other traffic is permitted

Corp1(config)#access-list 100 permit ip any any

Apply this access-list to Fa0/1 interface (outbound direction)

Corp1(config)#interface fa0/1
Corp1(config-if)#ip access-group 100 out

Notice: We have to apply the access-list to Fa0/1 interface (not Fa0/0 interface) so that the access-list
can filter traffic coming from both the LAN and the Core networks. If we apply access list to the
inbound interface we can only filter traffic from the LAN network.

In the exam, just click on host C to open its web browser. In the address box
type http://172.22.242.23 to check if you are allowed to access Finance Web Server via HTTP or
not. If your configuration is correct then you can access it.

Click on other hosts (A, B and D) and check to make sure you can’t access Finance Web Server from
these hosts.

Finally, save the configuration

(This configuration only prevents hosts from accessing Finance Web Server via web but if this server
supports other traffic – like FTP, SMTP… then other hosts can access it, too.)

Notice: You might be asked to allow other host (A, B or D) to access the Finance Web Server so please
read the requirement carefully.

Some modifications (mods):

Modification 1 (Mod 1):

permit host B from accessing finance server access-list 100 permit ip host 192.168.33.2 host
172.22.242.23

deny host B from accessing other servers (not access-list 100 deny ip host 192.168.33.2
the whole network) 172.22.242.16 0.0.0.15

permit everything else access-list 100 permit ip any any

Modification 2 (Mod 2):

Only allow Host C to to access the financial server access-list 100 permit ip host 192.168.33.3
host 172.22.242.23

Not allow anyone else in any way communicate with access-list 100 deny ip any host
the financial server 172.22.242.23

Allow all other traffic access-list 100 permit ip any any

Modification 3 (Mod 3):

– Host C should be able to use a web access-list 100 permit tcp host 192.168.33.3 host
browser(HTTP)to access the Finance Web 172.22.242.23 eq 80
Server

– Other types of access from host C to access-list 100 deny ip any host 172.22.242.23
the Finance Web Server should be (because the requirement says we can not use more than
blocked 3 statements so we have to use “any” here for the hosts
– All access from hosts in the Core or in the Core and hosts in local LAN)
local LAN to the Finance Web Server
should be blocked

– All hosts in the Core and local LAN access-list 100 permit ip any host
should be able to access the Public Web (If the question asks this, surely it has to give you the IP
Server * of Public Web Server) but in the exam you should use
“access-list 100 permit ip any any”

Modification 4 (Mod 4):

Other types of access from host C to access-list 100 deny ip host 192.168.33.3 host
the finance web server should be 172.22.242.23
blocked

All hosts in the core and on the local access-list 100 permit ip any host
LAN should be able to access the Public (The IP of Public Web Server will surely be given in this
web server * question) but in the exam you should use “access-list 100
permit ip any any”

* There are some reports about the command of “All hosts in the core and on the local LAN should be
able to access the Public web server” saying that the correct command should be “access-list 100
permit ip any any”, not “access-list 100 permit ip any host (IP of Public Web Server)”. Although I
believe the second command is better but maybe you should use the first command “access-list 100
permit ip any any” instead as some reports said they got 100% when using this command (even if the
question gives you the IP address of Public Web Server). It is a bug in this sim.

(Note: Don’t forget to apply this access list to the suitable interface or you will lose points
interface fa0/1
ip access-group 100 out

And in the exam, they may slightly change the requirements, for example host A, host B instead of
host C… so make sure you read the requirement carefully and use the access-list correctly)