Scribd Logo
Upload

Welcome to Scribd!

  • 441 views

    Heat Exchanger Specification Sheet SI Units

    Uploaded by

    Idil Fitri
    This document is a heat exchanger specification sheet containing technical details for a horizontal shell and tube heat exchanger. It lists key parameters such as dimensions, materials, temperatures, pressures, and heat transfer rates. The heat exchanger uses raw oil and gasoline oil as the shell and tube side fluids respectively and is designed to transfer 146043 Watts of heat with an actual heat transfer rate of 36.78 W/m2-K. It has 2094 stainless steel tubes arranged in a single pass configuration within the 2000mm diameter shell.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Heat Exchanger Specification Sheet SI Units

    Uploaded by

    Idil Fitri
    441 views1 page
    This document is a heat exchanger specification sheet containing technical details for a horizontal shell and tube heat exchanger. It lists key parameters such as dimensions, materials, temperatures, pressures, and heat transfer rates. The heat exchanger uses raw oil and gasoline oil as the shell and tube side fluids respectively and is designed to transfer 146043 Watts of heat with an actual heat transfer rate of 36.78 W/m2-K. It has 2094 stainless steel tubes arranged in a single pass configuration within the 2000mm diameter shell.

    Original Description:

    Sizing B

    Original Title

    B

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is a heat exchanger specification sheet containing technical details for a horizontal shell and tube heat exchanger. It lists key parameters such as dimensions, materials, temperatures, pressures, and heat transfer rates. The heat exchanger uses raw oil and gasoline oil as the shell and tube side fluids respectively and is designed to transfer 146043 Watts of heat with an actual heat transfer rate of 36.78 W/m2-K. It has 2094 stainless steel tubes arranged in a single pass configuration within the 2000mm diameter shell.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    441 views1 page

    Heat Exchanger Specification Sheet SI Units

    Uploaded by

    Idil Fitri
    This document is a heat exchanger specification sheet containing technical details for a horizontal shell and tube heat exchanger. It lists key parameters such as dimensions, materials, temperatures, pressures, and heat transfer rates. The heat exchanger uses raw oil and gasoline oil as the shell and tube side fluids respectively and is designed to transfer 146043 Watts of heat with an actual heat transfer rate of 36.78 W/m2-K. It has 2094 stainless steel tubes arranged in a single pass configuration within the 2000mm diameter shell.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    HEAT EXCHANGER SPECIFICATION SHEET Page 1

    SI Units

    Job No.
    Customer Reference No.
    Address Proposal No.
    Plant Location Date 5/26/2016 Rev
    Service of Unit Item No.
    Size 2000.00 x 5999.93 mm Type BEM Horz. Connected In 1 Parallel 1 Series
    Surf/Unit (Gross/Eff) 1002.55 / 975.68 m2 Shell/Unit 1 Surf/Shell (Gross/Eff) 1002.55 / 975.68 m2
    PERFORMANCE OF ONE UNIT
    Fluid Allocation Shell Side Tube Side
    Fluid Name RAW OIL GASOLINE OIL
    Fluid Quantity, Total kg/hr 25020.1 68004.3
    Vapor (In/Out)
    Liquid 25020.1 25020.1 68004.3 68004.3
    Steam
    Water
    Noncondensables
    Temperature (In/Out) C 80.00 103.00 106.00 99.00
    Specific Gravity 5.04e-4 4.74e-4 0.6655 0.6721
    Viscosity mN-s/m2 0.0200 0.0200 0.2368 0.2505
    Molecular Weight, Vapor
    Molecular Weight, Noncondensables
    Specific Heat kJ/kg-C 1.0000 1.0000 1.0000 1.0000
    Thermal Conductivity W/m-C 0.1210 0.1154 0.1016 0.1024
    Latent Heat kJ/kg
    Inlet Pressure kPa 600.009 600.009
    Velocity m/s 40.98 3.526e-2
    Pressure Drop, Allow/Calc kPa 60.001 32.443 60.001 2.895
    Fouling Resistance (min) m2-K/W 0.001999 0.001999
    Heat Exchanged W 146043 MTD (Corrected) 8.3 C
    Transfer Rate, Service 35.95 W/m2-K Clean 43.69 W/m2-K Actual 36.78 W/m2-K
    CONSTRUCTION OF ONE SHELL Sketch (Bundle/Nozzle Orientation)
    Shell Side Tube Side
    Design/Test Pressure kPaG 1034.21 / 1034.21 /
    Design Temperature C 106.00 106.00
    No Passes per Shell 1 1 2000
    mm

    Corrosion Allowance mm
    Connections In mm 1 @ 539.751 1 @ 128.194
    Size & Out mm 1 @ 539.751 1 @ 128.194 6
    m

    Rating Intermediate @ @
    Tube No. 2094 OD 25.400 mm Thk(Avg) 1.651 mm Length 6.000 m Pitch 37.500 mm Layout 90
    Tube Type Plain Material 304 STAINLESS STEEL (18 CR, 8 NI)
    Shell ID 2000.00 mm OD mm Shell Cover
    Channel or Bonnet Channel Cover
    Tubesheet-Stationary Tubesheet-Floating
    Floating Head Cover Impingement Plate None
    Baffles-Cross Type SINGLE-SEG. %Cut (Diam) 35.30 Spacing(c/c) 400.000 Inlet 1119.57 mm
    Baffles-Long Seal Type
    Supports-Tube U-Bend Type
    Bypass Seal Arrangement Tube-Tubesheet Joint
    Expansion Joint Type
    Rho-V2-Inlet Nozzle 1829.83 kg/m-s2 Bundle Entrance 1169.35 Bundle Exit 1755.94 kg/m-s2
    Gaskets-Shell Side Tube Side
    -Floating Head
    Code Requirements TEMA Class
    Weight/Shell 25998.8 Filled with Water 51784.1 Bundle 17192.2 kg
    Remarks:

    Reprinted with Permission (v6 )

    \\PROCUREMENT-PC\Engineering\Tendering\ECO ASPHALT\HE CALCULATION\E001\E001.htri

    You might also like