An Integrated Mine Plan
An Integrated Mine Plan
An Integrated Mine Plan
Introduction
Goldcorp is one of the largest gold producers in the world with projects in South, Central and North America. Goldcorp’s
flagship operation is Peñasquito, a world-class, poly-metallic deposit that started production in 2010 which is one of
the largest mines in Mexico. Since the early stages of the project, Goldcorp has used the most advanced technologies
available to maximize its value. However, the implementation of optimum mine plans has been challenging to put into
practice. This is due to the fact that the mine operation involves more complexity than the plans usually reflect. This
challenge is an industry wide issue that presents opportunities for improvement. This technical session discusses the
mine planning methodologies and procedures used to connect long, medium, and short term planning strategies in
order to bridge the gap and produce optimum mine plans that can be practically implemented in the field.
Project Overview
The Peñasquito mine is a typical open pit truck and shovel operation located in Zacatecas, Mexico. The ore deposit
contains mineralization of gold, silver, lead, and zinc hosted mainly by two breccia pipes: Peñasco and Brecha Azul.
The oxide ore is delivered to the heap leach from which gold and silver doré bars are recovered. Similarly, the sulphide
ore is delivered to the crusher and mill circuit from which lead and zinc concentrates are produced. There are three
main dump locations to store the waste mined. The waste dump facilities have a combined storage capacity adequate
to handle the amount of waste mined over the expected life of the project. It should be noted that a portion of the
waste material is discharged directly into the dumps by the haul trucks. However, some of the waste is delivered into
a crusher that feeds a conveyor belt system which transport the material into a stacker which places the waste mined
in the dump facility. In addition to that there is a tailings storage site that was designed as a zero discharge facility in
accordance with environmental standards.
2 | MineSight
THE MINESIGHT SERIES:
Connecting Planning Strategies
Mine Planning
Mine planning studies at Goldcorp Peñasquito assist
management with the evaluation of multiple mine planning
alternatives from which those that are most viable and
aligned with the company’s objective are selected, refined and
implemented.
This process is cyclical as the mine plans are constantly
updated to adjust to the changes in the business environment.
3 | MineSight
THE MINESIGHT SERIES:
Connecting Planning Strategies
4 | MineSight
THE MINESIGHT SERIES:
Connecting Planning Strategies
Certain mining considerations have to be implemented into the medium and short term plans in order to make the
schedules practical. For example, the number of open benches has to be limited to prevent the shovel from moving
from one bench to another. Similarly, vertical separation among phases may be necessary for safety reasons. The
schedule has to be checked period by period graphically and analytically to ensure that the excavators assigned can
be physically and timely moved from one mining area to another one from period to period subject to the excavation
rates and other constrains.
The mining rate for each phase may vary by elevation depending on a number of factors such as the space available.
In some benches there may be enough room for two or more excavators while in other levels there may only be enough
room for one excavator.
Detailed haul profiles are designed to reflect the available routes for each period from the mining cuts to the existing
and future destinations such as waste dumps and stock piles. The cycle times for the truck fleets are calculated based
on the detailed haul profiles and calibrated against field observations and data obtained from the fleet management
system.
The creation of the mine plans is monitored and updated on a regular basis to make sure that the operation stays on
track and that production milestones are achieved according to plan. For example, the rolling plan forecast is completed
and updated every month. This allows for monthly plan corrections and reconciliation between the extraction plan
and the actual mined out areas. Therefore, the creation of plans and the continuous supervision of its implementation
go hand in hand to make sure that the operation stays on target, so the mine productivity and profitability can attain
its maximum potential.
5 | MineSight
THE MINESIGHT SERIES:
Connecting Planning Strategies
However, with the evolution of mine planning software there are new tools such as MineSight Schedule Optimizer
(MSSO) which can be used for long, medium and short range planning. In the case of Peñasquito, the short term plans
used to be prepared with MineSight Interactive Planner (MSIP). However, this was a manual process and very time
consuming. In April of 2012, Goldcorp implemented the use of MSSO at Peñasquito to generate and optimize their short
term schedules. The first task was to reproduce with MSSO the schedules previously produced with MSIP. The second
6 | MineSight
THE MINESIGHT SERIES:
Connecting Planning Strategies
task was to find opportunities to improve the mine plan and optimize the schedule. The successful implementation of
MSSO for the rolling plan forecasts lead to its application for medium term plans as well. In 2012 and 2013 there were
significant developments in MSSO such as the ability to schedule on partial cuts, equipment/haulage integration,
multi-period optimization and scheduling, etc. These developments among others enabled MSSO to be used for long
term planning as well. Early in 2013, the long term schedules generated with MineSight Strategic Planner (MSSP) and
other third party scheduling tools, were validated and reproduced with MSSO. Thus, MineSight Schedule Optimizer
became essential not only for short term plans but also for medium and long terms plans. There are many advantages
associated by using the same tool for long, medium and short range schedules. For example, the integrity of the data
is kept under a single database, therefore the validation of data and the time required to import/export data formats
is kept to a minimum. With MineSight Schedule Optimizer the plans can be refined and additional levels of detailed
can be added within a single interface. The results can be quickly visualized in MineSight 3D and mining rules can be
added dynamically for user control. Also, the software training required for mine engineers to transition from short to
medium or long range planning is minimum.
The information gathered from the long range plans is transmitted seamlessly to the medium and short range
engineers. Similarly, the information gathered from the medium and short range plans is retrofitted into the long term
plans to make them more representative. The end result is a strategic business plan in which the first periods are
broken down by month according to the rolling plan forecast, followed by quarterly and yearly forecasts in which long
and short term planning strategies are integrated and perfectly aligned.
Assembling a project team in which the members understand how their work connects to each other and serves
the long and short term goals of the organization is key to producing and implementing an integrated mine plan.
Ultimately, mine planning philosophies have to align with mine operations so the mine plans can be realized in the
field. Therefore, the performance of the mine most be monitored and measured to ensure that the business objectives
are met according to the strategic vision of the organization. Similarly, the mine plans have to be flexible and adaptable
in order to respond to changes in the conditions of the operation and the business environment.
References
1. Vivas, Raul E. and Chimal, Juan (2013), “Bridging the gap between optimum and practical mine plans at Goldcorp
Peñasquito”, MineQuest 2013, Tucson, AZ.
2. Belanger, Maryse; Pareja, Guillermo and Nahan, Peter (2010), “Peñasquito Polymetallic Operation, Zacatecas
State, Mexico, NI 43-101 Technical Report”.
3. Camus, Juan (2002), “Management of Mineral Resources: Creating Value in the Mining Business”. Englewood, CO.
Society for Mining, Metallurgy, and Exploration, Inc. (SME).
4. Lonergan, Jim (2008), “Long Term Mine Planning for Open Pit Mines”. Tucson, AZ. Mintec Inc.
7 | MineSight
About MineSight
MineSight is a comprehensive modeling and mine planning platform, delivering integrated solutions for exploration,
modeling, design, scheduling, and operation.
MineSight is part of Hexagon Mining, the only global provider of surface and underground smart mining solutions
that integrate design, planning, and operations technologies for safer, more productive mines.
Hexagon Mining is the only company to solve surface and underground challenges by integrating design, planning,
and operations technologies for safer more productive mines. Headquartered in Tucson, Arizona, with more than
30 offices across five continents, the company is a dynamic network of talented mining professionals delivering
technology, service, and support.
Hexagon Mining unites industry leaders MineSight, Leica Geosystems Mining, Devex Mining, and SAFEmine. Together
they seamlessly link mine planning, mine operations, and mine safety products for a comprehensive flow of data
across operations.
Hexagon Mining is part of Hexagon (Nasdaq Stockholm: HEXA B; www.hexagon.com, a leading global provider
of information technologies that drive quality and productivity improvements across geospatial and industrial
enterprise applications.
Learn more at www.hexagonmining.com.
hexagonmining.com
@HexagonMining
[email protected]
150626