Automatic Identification System (AIS) : System Ships Vessel Traffic Services Vessels Data Ships Marine Radar

Automatic Identification System
(AIS)
The Automatic Identification System (AIS) is an automatic tracking system used on
ships and by vessel traffic services (VTS) for identifying and locating vessels by
electronically exchanging data with other nearby ships AIS Base stations and Satellites.
When satellites are used to detect AIS signatures then the term Satellite-AIS (S-AIS)is
used. AIS information supplements marine radar, which continues to be the primary
method of collision avoidance for water transport.
A marine traffic coordinator using AIS and radar to manage vessel traffic.
An AIS-equipped system on board a ship presents the bearing and distance of nearby
vessels in a radar-like display format.
A graphical display of AIS data on board a ship.

Information provided by AIS equipment, such as unique identification, position, course,
and speed, can be displayed on a screen or an ECDIS. AIS is intended to assist a vessel's
watchstanding officers and allow maritime authorities to track and monitor vessel
movements. AIS integrates a standardized VHF transceiver with a positioning system
such as a LORAN-C or GPS receiver, with other electronic navigation sensors, such as a
gyrocompass or rate of turn indicator. Vessels fitted with AIS transceivers and
transponders can be tracked by AIS base stations located along coast lines or, when out
of range of terrestrial networks, through a growing number of satellites that are fitted
with special AIS receivers which are capable of deconflicting a large number of
signatures.
The International Maritime Organization's International Convention for the Safety of
Life at Sea requires AIS to be fitted aboard international voyaging ships with gross
tonnage (GT) of 300 or more tons, and all passenger ships regardless of size.
Applications and limitations
Collision avoidance
AIS was developed to avoid collisions among large vessels at sea that are not within
range of shore-based systems. Due to the limitations of VHF radio communications, and
because not all vessels are equipped with AIS, the system is meant to be used primarily
as a means of lookout and to determine the risk of collision rather than as an automatic
collision avoidance system, in accordance with the International Regulations for
Preventing Collisions at Sea.
A vessel's text-only AIS display, listing nearby vessels' range, bearings, and names
When a ship is navigating at sea, information about the movement and identity of other
ships in the vicinity is critical for navigators to make decisions to avoid collision with
other ships and dangers (shoal or rocks). Visual observation (e.g., unaided, binoculars,
and night vision), audio exchanges (e.g., whistle, horns, and VHF radio), and radar or
Automatic Radar Plotting Aid are historically used for this purpose. These preventative
mechanisms, however, sometimes fail due to time delays, radar limitations,
miscalculations, and display malfunctions and can result in a collision.
While requirements of AIS are to display only very basic text information, the data
obtained can be integrated with a graphical electronic chart or a radar display, providing
consolidated navigational information on a single display.
Vessel traffic services

In busy waters and harbors, a local vessel traffic service (VTS) may exist to manage ship
traffic. Here, AIS provides additional traffic awareness and information about the
configuration and movements of ships.
Maritime Security
AIS enables authorities to identify specific vessels and their activity within or near a
nation's Exclusive Economic Zone. When AIS data is fused with existing radar systems,
authorities are able to differentiate between vessels more easily.
AIS improves maritime domain awareness and allows for heightened security and
control. Additionally, AIS can be applied to freshwater river systems and lakes.
Aids to navigation
AIS was developed with the ability to broadcast the positions and names of objects other
than vessels, such as navigational aid and marker positions and dynamic data reflecting
the marker's environment (e.g., currents and climatic conditions). These aids can be
located on shore, such as in a lighthouse, or on water, platforms, or buoys. The U.S.
Coast Guard has suggested that AIS might replace racon (radar beacons) currently used
for electronic navigation aids.
The ability to broadcast navigational aid positions has also created the concepts of
Synthetic AIS and Virtual AIS. In the first case, an AIS transmission describes the
position of a physical marker but the signal itself originates from a transmitter located
elsewhere. For example, an on-shore base station might broadcast the position of ten
floating channel markers, each of which is too small to contain a transmitter itself. In the
second case, it can mean AIS transmissions that indicate a marker which does not exist
physically, or a concern which is not visible such as submerged rocks or a shipwreck.
Although such virtual aids would only be visible to AIS-equipped ships, the low cost of
maintaining them could lead to their usage when physical markers are unavailable.
Search and rescue

For coordinating on-scene resources of a marine search and rescue (SAR) operation, it is
imperative to have data on the position and navigation status of other ships in the
vicinity. In such cases, AIS can provide additional information and enhance awareness
of available resources, even if the AIS range is limited to VHF radio range. The AIS
standard also envisioned the possible use on SAR aircraft, and included a message (AIS
Message 9) for aircraft to report their position.
To aid SAR vessels and aircraft in locating people in distress, the specification (IEC
61097-14 Ed 1.0) for an AIS-based SAR transmitter (AIS-SART) was developed by the
IEC's TC80 AIS work group. AIS-SART was added to Global Maritime Distress Safety
System regulations effective January 1, 2010. AIS-SARTs have been available on the
market since at least 2009.
Recent regulations have mandated the installation of AIS systems on all Safety Of Life
At Sea (SOLAS) vessels and vessels over 300 tons.
Accident investigation
AIS information received by VTS is important for accident investigation since it
provides accurate data on time, identity, GPS-based position, compass heading, course
over ground, speed (by log/SOG), and rates of turn, rather than the less accurate
information provided by radar.
A more complete picture of the events could be obtained by Voyage Data Recorder
(VDR) data if available and maintained on board for details of the movement of the ship,
voice communication and radar pictures during the accidents. However, VDR data are
not maintained due to the limited twelve hours storage by IMO requirement.

Automatic Identification System (AIS) : System Ships Vessel Traffic Services Vessels Data Ships Marine Radar

Uploaded by

Document Informationclick to expand document information

Copyright:

Available Formats

Automatic Identification System (AIS) : System Ships Vessel Traffic Services Vessels Data Ships Marine Radar

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Automatic Identification System (AIS) : System Ships Vessel Traffic Services Vessels Data Ships Marine Radar

Uploaded by

Copyright:

Available Formats

Automatic Identification System

A graphical display of AIS data on board a ship.

Applications and limitations

Vessel traffic services

Search and rescue

You might also like