VTX V25-II

SPECSHEET

High Performance Dual 15” Line Array Element

Fixed Angle ASM Suspension System

Key Features:
• Latest-generation Radiation Boundary Integrator® and HF waveguide
technology delivers incredibly precise horizontal and vertical coverage
with increased HF output from three patented D2 Dual Diaphragm Dual
Voice Coil high frequency drivers

• Differential Drive™, Dual Neodymium Magnet, Dual Voice Coil, Direct

Cooled™ MF and LF transducers

• Patented JBL S.A.F.E. fixed angle tension suspension system

streamlined for speed and efficiency with fewer pinning operations.
Ergonomic dolly board and protective cover available for convenient
transport of individual enclosures.

• BSS® Audio OmniDriveHD V5 Processing for use with Crown Audio

ITechHD or VRack via JBL HiQnet Performance Manager Control™
Description:
The VTX V25-II is a full size, high-output line array element designed to deliver maximum acoustic output with the highest possible fidelity in a wide variety
of sound reinforcement applications. Based around industry-leading JBL transducer technology, including the patented D2 Dual Diaphragm Dual Voice
Coil high frequency driver, VTX V25-II delivers premium performance with a remarkably high power to weight ratio. JBL HiQnet Performance Manager™
control enables fast, accurate system configuration and deployment, while BSS® Audio OmniDrive HD V5 processing provides clear, consistent sound in any
configuration. Available with either fixed angle tension suspension (V25-II) or compression suspension (V25-II-CS) hardware.

Specifications:
System Transducers
Frequency Range (-10 dB): 35 Hz - 18 kHz (short throw mode, free field) Low Frequency: 2 x 2267H, 381 mm (15 in) dia., 100mm (4 in)
Dual Voice Coil, Neodymium Differential Drive®,
Coverage Pattern (-6dB) Horizontal: 90 degrees nominal (300 Hz - 16 kHz) Direct Cooled™
Vertical: Varies with array size and configuration (0-10 Mid Frequency: 4 x 2169H, 203 mm (8 in) dia., 76mm (3 in) Dual
degree inter-enclosure angles) Voice Coil, Neodymium Differential Drive®, Direct
System Input Power Rating: Cooled™
Active LF: 2 x 2000 W Continuous (AES / 2 hour) High Frequency: 3 x 2430K D2 Dual Diaphragm Dual Voice Coil
MF: 1400 W Continuous (AES / 2 hour) Compression Driver, 76 mm (3 in) dia. dual voice
HF: 600 W Continuous (AES / 2 hour) coils, 38 mm (1.5 in) exit
Bandpass Sensitivity: LF: 99 dB 1W / 1m (2.0 Vrms at 3.3 ft) free field Enclosure
MF: 103 dB 1W / 1m (2.83 Vrms at 3.3ft)
HF: 116 dB 1W / 1m (2.83 Vrms at 3.3ft) Construction: Cast aluminum front baffle. 18 mm, 11-ply
Finnish birch plywood; black DuraFlex™ finish;
Maximum Peak Output²: 141 dB SPL (LF), 140.5 dB SPL (MF), 149.5 dB
integral recessed handles
SPL (HF)
Suspension: Fixed angle ASM suspension system: 0, 1, 2, 3,
Required Amplification & Crown® I-TechHD or VRack power amplification
4, 5, 6, 7, 8, 9, 10 degree inter-enclosure angle
Processing: JBL HiQnet Performance Manager™ system options
control
Grille: Powder coated 14 gauge hex-perforation steel
System Impedance: LF: 2 x 8 ohms with acoustically-transparent black cloth backing
MF: 1 x 8 ohms
Input Connectors: Neutrik® Speakon® NL-8 (2x)
HF: 1 x 8 ohms
LF1: 1+/-, LF2: 2+/-, MF: 3+/-, HF: 4+/-
Dimensions (H x W x D): 414 mm x 1223.5 mm x 614 mm
(16.3 in x 48.2 in x 24.2 in)
Net Weight: 82.6 kg (182 lbs)

Footnotes:
1: AES Standard, one decade pink noise with 6 dB crest factor within device’s operational band, free air.
2: Peak, unweighted SPL measured under free-field conditions (free-field 1 meter) using broadband pink noise with a 10dB crest factor.
JBL continually engages in research related to product improvement. Some materials, production methods and design refinements are introduced into existing products without notice as a routine expression of that philosophy. For this reason, any current
JBL product may differ in some respect from its published description, but will always equal or exceed the original design specifications unless otherwise stated.
 VTX V25-II
SPECSHEET

High Performance Dual 15” Line Array Element

Fixed Angle ASM Suspension System

Acoustical Measurements Beamwidth

Frequency Response with Recommended Digital Signal Processing -6dB Horizontal Coverage
Preset: VTX V25-II X ST
115 360

-6 dB Beamwidth (degrees)
105
100
SPL (dB)

95

85 Horizontal

75 10
20 100 1000 10000 20000 20 100 1000 10000 20000
Frequency (Hz) Frequency (Hz)

Dimensions

45.8 [1164]
10.0 [254]

16.3 [414]

24.2 [614]

Accessories 48.2 [1223]

• VTX-V25-ACC: Protective cover and transport dolly for 1 x VTX-V25

• VTX-LZ-K

• VTX-LZ-V25-MB

VTX-V25-AF
Array Frame

VTX-V25-AF-EB
Extension Bar

© 2015 Harman International Industries, Incorporated | 8500 Balboa Blvd. Northridge, CA 91329 USA | www.jblpro.com | SSVTXV25II • CRP • 03/15