Scribd
Upload
1K views3 pages

Ac Notes Full

Alternating current (AC) is a current that varies in both magnitude and direction periodically over time. The effective or root mean square (rms) value of AC is defined as the value that would generate the same amount of heat in a resistor over a full cycle as a steady current over the same time period. The average or mean value of AC is defined as the value that would send the same amount of charge through a circuit in half a cycle as a steady current over the same time. Both AC voltage and current vary sinusoidally over time and can be represented graphically. Inductive reactance and capacitive reactance describe the opposing nature of inductors and capacitors, respectively, to alternating current flow. The

Uploaded by

Kushal Sarkar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views3 pages

Ac Notes Full

Alternating current (AC) is a current that varies in both magnitude and direction periodically over time. The effective or root mean square (rms) value of AC is defined as the value that would generate the same amount of heat in a resistor over a full cycle as a steady current over the same time period. The average or mean value of AC is defined as the value that would send the same amount of charge through a circuit in half a cycle as a steady current over the same time. Both AC voltage and current vary sinusoidally over time and can be represented graphically. Inductive reactance and capacitive reactance describe the opposing nature of inductors and capacitors, respectively, to alternating current flow. The

Uploaded by

Kushal Sarkar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Alternating Current

1. Alternating Current (AC) It is the current which varies in both magnitude as well as direction alternatively
and periodically.
I = I0 sin ωt or I = I0 cosωt where, I0 = peak value or maximum value of AC.
2. Effective Value or rms Value of AC It is defined as the value of AC over a complete cycle which would
generate same amount of heat in a given resistors that is generated by steady current in the same resistor and
in the same time during a complete cycle.

The 70.7% of peak value of current gives effective or rms value of AC.
3. Average or Mean Value of AC It is defined as the value of AC which would send same amount of charge
through a circuit in half-cycle that is sent by steady current in the same time.

The 63.7% of peak value of AC gives average or mean value of AC.


NOTE: In a complete cycle of AC, the mean value of AC will be zero.
4. Alternating emf or Voltage It is the emf which varies in both magnitude as well as direction alternatively and
periodically. The instantaneous alternating emf is given by

Both AC voltage and AC current are represented by diagrams as shown below:


5. Inductive Reactance (XL) The opposing nature of inductor to the flow of current is called Inductive reactance.

6. Capacitive Reactance (Xc) The opposing nature of capacitor to the flow of alternating current is called
capacitive reactance.

7. Power In an AC circuit, both emf and current change continuously w.r.t. time, so in circuit, we have to
calculate average power in complete cycle (0 –> T).
8. Average power consumption in pure inductive and pure capacitive circuit is equal to zero because

9. Wattless Current The current in an AC circuit when average power consumption in AC circuit is zero, is
referred as wattless current or idle current.

You might also like