The document provides specifications for various components that could be used in a Raspberry Pi project including a Raspberry Pi 3 Model B+, ultrasonic sensor, 7-inch LCD display, MPU-9250 accelerometer module, Arduino Uno, Bluetooth module, and vibration sensor. The Raspberry Pi has a 1.4GHz processor, 1GB RAM, WiFi/Bluetooth connectivity and GPIO pins. The ultrasonic sensor measures distance from 2cm to 80cm with 3mm accuracy. The LCD display has a 7-inch 480x800 touchscreen. The accelerometer measures acceleration, rotation and magnetic fields. The Arduino Uno is a microcontroller board with analog/digital pins and 32KB flash memory.
The document provides specifications for various components that could be used in a Raspberry Pi project including a Raspberry Pi 3 Model B+, ultrasonic sensor, 7-inch LCD display, MPU-9250 accelerometer module, Arduino Uno, Bluetooth module, and vibration sensor. The Raspberry Pi has a 1.4GHz processor, 1GB RAM, WiFi/Bluetooth connectivity and GPIO pins. The ultrasonic sensor measures distance from 2cm to 80cm with 3mm accuracy. The LCD display has a 7-inch 480x800 touchscreen. The accelerometer measures acceleration, rotation and magnetic fields. The Arduino Uno is a microcontroller board with analog/digital pins and 32KB flash memory.
The document provides specifications for various components that could be used in a Raspberry Pi project including a Raspberry Pi 3 Model B+, ultrasonic sensor, 7-inch LCD display, MPU-9250 accelerometer module, Arduino Uno, Bluetooth module, and vibration sensor. The Raspberry Pi has a 1.4GHz processor, 1GB RAM, WiFi/Bluetooth connectivity and GPIO pins. The ultrasonic sensor measures distance from 2cm to 80cm with 3mm accuracy. The LCD display has a 7-inch 480x800 touchscreen. The accelerometer measures acceleration, rotation and magnetic fields. The Arduino Uno is a microcontroller board with analog/digital pins and 32KB flash memory.
The document provides specifications for various components that could be used in a Raspberry Pi project including a Raspberry Pi 3 Model B+, ultrasonic sensor, 7-inch LCD display, MPU-9250 accelerometer module, Arduino Uno, Bluetooth module, and vibration sensor. The Raspberry Pi has a 1.4GHz processor, 1GB RAM, WiFi/Bluetooth connectivity and GPIO pins. The ultrasonic sensor measures distance from 2cm to 80cm with 3mm accuracy. The LCD display has a 7-inch 480x800 touchscreen. The accelerometer measures acceleration, rotation and magnetic fields. The Arduino Uno is a microcontroller board with analog/digital pins and 32KB flash memory.
Download as DOCX, PDF, TXT or read online from Scribd
Download as docx, pdf, or txt
You are on page 1/ 7
Component Details
Raspberry pi 3:
Specification The Raspberry Pi 3 Model B+ is the final revision in the Raspberry Pi 3 range. • Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz • 1GB LPDDR2 SDRAM • 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE • Gigabit Ethernet over USB 2.0 (maximum throughput 300 Mbps) • Extended 40-pin GPIO header • Full-size HDMI • 4 USB 2.0 ports • CSI camera port for connecting a Raspberry Pi camera • DSI display port for connecting a Raspberry Pi touchscreen display • 4-pole stereo output and composite video port • Micro SD port for loading your operating system and storing data • 5V/2.5A DC power input • Power-over-Ethernet (PoE) support (requires separate PoE HAT)
Ultrasonic Sensor: Operating voltage: +5V
Theoretical Measuring Distance: 2cm to 450cm
Practical Measuring Distance: 2cm to 80cm
Accuracy: 3mm
Measuring angle covered: <15°
Operating Current: <15mA
Operating Frequency: 40Hz
LCD Display: LCD size 7 inch(Diagonal) Touch Screen Controller FT5206 LCD Type TFT Resolution 800 × 3 (RGB) × 480 Backlight LED Interface type RGB Active area 154.08 x 85.92 mm
Accelerometer: MPU-9250 modules ( three-axis gyroscope + triaxial accelerometer + triaxial magnetic field ) Use Chip : MPU-9250 Power supply :3-5v ( internal low dropout regulator ) Communication: IIC communication protocol standard Chip 16bit AD converter 16 outputs the data Gyro range : ± 250 500 1000 2000 ° / s Acceleration range : ± 2 ± 4 ± 8 ± 16g Magnetic field range : ± 4800uT Using Immersion Gold PCB, machine welding process to ensure quality 2.54mm pin pitch Module size 15mm * 25mm
Arduino Board: The Arduino Uno is a microcontroller board based on the ATmega328. Arduino is an open-source, prototyping platform and its simplicity makes it ideal for hobbyists to use as well as professionals. Features of the Arduino UNO:
Microcontroller: ATmega328
Operating Voltage: 5V
Input Voltage (recommended): 7-12V
Input Voltage (limits): 6-20V
Digital I/O Pins: 14 (of which 6 provide PWM output)
Analog Input Pins: 6
DC Current per I/O Pin: 40 mA
DC Current for 3.3V Pin: 50 mA
Flash Memory: 32 KB of which 0.5 KB used by bootloader
SRAM: 2 KB (ATmega328)
EEPROM: 1 KB (ATmega328)
Clock Speed: 16 MHz
Bluetooth Module: A BlueTooth module is usually a hardware component that provides. a wireless product to work with the computer; or in some cases, the. bluetooth may be an accessory or peripheral, or a wireless headphone. Specifications: Bluetooth protocal: Bluetooth Specification v2.0+EDR Frequency: 2.4GHz ISM band Modulation: GFSK(Gaussian Frequency Shift Keying) Emission power: =4dBm, Class 2 Sensitivity: =-84dBm at 0.1% BER Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps Security: Authentication and encryption Profiles: Bluetooth serial port Power supply: +3.3VDC 50mA Working temperature: -20 ~ +75 Centigrade Dimension: 26.9mm x 13mm x 2.2 mm Application: Computer and peripheral devices GPS receiver Industrial control MCU projects
Vibration sensor module:
Vibration sensors are sensors for measuring, displaying, and analyzing linear velocity, displacement and proximity, or acceleration. Specifications: Model: SW-420. Operating Voltage: 3.3 V to 5 V. Current: >15 mA. Output Type: Digital Switch Output (0 and 1) Uses the SW-420 normally closed vibration sensor module. Uses the LM393 comparator. Mounting hole for easy installation. PCB Size: 32 x 14 mm.
(Lecture Notes in Computer Science 5692 _ Information Systems and Applications, Incl. Internet_Web, And HCI) Edith Elkind (Auth.), Tommaso Di Noia, Francesco Buccafurri (Eds.)-E-Commerce and Web Techn
(Lecture Notes in Computer Science 5692 _ Information Systems and Applications, Incl. Internet_Web, And HCI) Edith Elkind (Auth.), Tommaso Di Noia, Francesco Buccafurri (Eds.)-E-Commerce and Web Techn
