0% found this document useful (0 votes)
166 views9 pages

New Command

This document contains configuration commands and troubleshooting steps for Cisco, Juniper, MPLS and BGP networks. It includes commands to check interfaces, routing tables, traffic rates, BGP neighbors and routes. It also provides troubleshooting steps for issues like slow browsing, DNS errors, mailing issues and bandwidth choking. Contact details for various NOC teams are listed for issues related to media, reachability, PTR entries and more.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
166 views9 pages

New Command

This document contains configuration commands and troubleshooting steps for Cisco, Juniper, MPLS and BGP networks. It includes commands to check interfaces, routing tables, traffic rates, BGP neighbors and routes. It also provides troubleshooting steps for issues like slow browsing, DNS errors, mailing issues and bandwidth choking. Contact details for various NOC teams are listed for issues related to media, reachability, PTR entries and more.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 9

ISP:-203.101.87.

XX

MPLS:-202.123.37.XX
202.123.47.XX

BGP:

sh ip vrf int | in 10.228.51.226

sh ip vrf all int bri | in 172.35.115.66

sh int Gi3/0/0.654

sh policy-map int Gi3/0/0.654 | in rate

sh policy-map int Gi3/0/0.654 | in rate

p vrf SOUTH-INDIAN-BANK-M 10.228.51.225 re 500

CISCO:-

(1)Sh ip ro wan ip.

(2)sh int interface name.

(3)ping wan ip(gateway).

(4)ping wan ip(customer).

(5)TRAFFIC;-sh policiy-map int interface name | i rate.

(6)sh clock.

(7)FREE LAn;-sh ip cef giga12/0/1.2928.(old)

(8)Finding Ip Detail:-sh ip cef GigabitEthernet0/2.210

(8)LAn IP Finding:-sh route stati | i wan ip(new)


==========================================================================

JUNIPER:-

(1)sh ro wan ip.

(2)sh int interface name.

(3)ping wan ip(gateway).

(4)ping wan ip(customer).

(5)TRAFFIC:-monitor int interfacename.

(6)FREE LAN;-show conf | dis set | match wan ip(increase 2)

(7)Static IPs:show configuration |display set | match wan ip(CE)

(8)ping routing-instance INDIAONE WAN Ip


>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
For BGP Advertisement

show ip bgp vpnv4 vrf BBNL-INTERNET summary | inc 182.73.157.

sh ip route vrf BBNL-INTERNET all | include 182.73.207.74

sh ip bgp summary | include (125.19.65.10)

===================================================================================
====
MPLS;-

(1)sh ip vrf int | in wan ip.

(2)sh int interfacename.

(3)ping vrf vrf name wan ip(gateway)

(4)ping vrf vrf name wan ip(customer repeat 500)

(5)sh ip vrf vrfname interfacename

(6)Sh policiy-map int interface name | i rate

(7)FOR Reachability:-(1)traceroute vrf BBNL-INTERNET (ip)115.113.37.242 source


(wan ip ce)182.71.179.37

on duplicate putty=telnet 12.0.1.28.=


(8)For finding static ip:sh ip cef vrf BBNL-INTERNET Gi2/1.656(CISCO)

sho ip route vrf BBNL-INTERNET static | include 182.74.97.97


===================================================================================
========

BHARTI DNS :-202.56.230.7


202.56.230.2
===================================================================================
========

(1)NOC DATA ISP:-IP related || Site || LAtency || RTO ||SWitch || Telemedia.

(2)ANG NOC TX:-Media | last mile || RTO||Link Down || BW || Duplex Setting.

(3)ENOC TAC 2:-MPLS Router ||SIP Detail||H to S reachablity.

(4)DCO Help DEsk:- PTR Entry || DNS ISsue

(5)DCO System:-Corporate Internet , MRTG

(6)DCO Apps L:-MRTG LINk

===================================================================================
===============

Dear Customer,

Your link is over utilized ,Please reduce it below 90% as per MRTG Graph for proper
browsing.

===================================================================================
====================

CISCO Commands: MPLS Application not working

tcp mss setting done on Vlan 1 now application are working fine >> <COMI-NDL02-
RTR005>dis cu int vlan1
#
interface Vlan-interface1
ip address 192.162.110.1 255.255.255.0
tcp mss 1000
#
return
<COMI-NDL02-RTR005>dis clo
<COMI-NDL02-RTR005>dis clock
22:16:55 IST Tue 07/08/2014
Time Zone : IST add 11:19:00
<COMI-NDL02-RTR005>

===================================================================================
===========================
IP Different Showing :-

(1)Sh route WAN Ip

(2)Display set | match wan ip(For LAn Ip Pool)

===================================================================================
=======================

Primary DNS: 202.56.230.2

Secondary DNS: 202.56.230.7

202.56.230.5/6

8.8.8.8

4.2.2.2

===================================================================================
=========
For BGP Advertisement

show ip bgp vpnv4 vrf BBNL-INTERNET summary | inc 182.73.157.

sh ip route vrf BBNL-INTERNET all | include 182.73.207.74

sh ip bgp summary | include (125.19.65.10)

===================================================================================
=====
FTP Server IP - 182.79.255.62 ||182.79.254.14 ftpuser test123
Username - aircust
Password - aircust@999
FTP Server IP : 202.56.215.5
User name : noc
Passowrd�: Lucent@noc

===================================================================================
====

sh ip cef vrf BBNL-INTERNET Gi2/3.103

===================================================================================
======
BGP

juniper :

show bgp summary | match 125.22.195.10

show route receive-protocol bgp 182.73.185.6

show route advertising-protocol bgp 125.17.109.45 | match 203.92.62.0

cisco :

sh ip bgp summary | inc 125.17.245.6

sh ip bgp neighbors | inc 125.17.245.6

for checking advertised routes :

sh bgp neighbor 144.36.135.214 advertised-route


sh bgp neighbor 144.36.135.214 routes | include
sh ip bgp neighbors 125.16.58.98 routes | in 202.95.251
sh ip bgp 125.180.53.228

MPLS BGP:

sh ip bgp vpnv4 vrf BBNL-INTERNET summary | in 182.73.170.109

MPLS BGP : sh ip bgp vpnv4 vrf VRF_name neighbors 10.85.239.78 advertised-routes |


in 10.85.0.1/32

MPLS BGP:sh ip bgp vpnv4 vrf E-FUNDS-INTERNATIONAL-INDIA-H5 neighbors


172.21.204.221 routes

Private AS Range 64512 - 65534


for bgp reset : clear ip bgp* & clear ip bgp* soft

===================================================================================
================================
Static

for checking static route:sh route static | in 125.17.115.142

sh rpl prefix-set pfx_MSOI-ISP-056


sh ip cef interface_name

MPLS lan ip pool :

sh ip cef vr BBNL-INTERNET Gi8/1.256

RP/0/7/CPU0:THN-ISP-COR-RTR-51#sh rpl prefix-set pfx_IBSX-ISP-003 | include


49.43.0.0/16 (To check prefix in IP policy)

sh ip cef vrf AT&t-Blue-Intenational-M exact-route source IP Destination IP


show route 125.19.65.37 detail | match prot
sh running-config interface Gi8/1.256
for interface :sh ip int br | in 125.17.228.29

===================================================================================
=======================================

OSPF:-

sh ip ospf interface GigabitEthernet7/1.2712

sh ip ospf neighbor GigabitEthernet7/1.2712

===================================================================================
====================================

If You wants to verify BW then use WAN Killer software on single system directly
connnected with router or modem in unlive environment .
===================================================================================
=====================================================

There is no revert from customer since 4 days and no issue from bharti end so we
are resolving this sr from our end .If cust will face issue then raise new sr with
exact problem statement . IPv4:

===================================================================================
==========================================================================

Please provide the below mentioned details for DNS issue.


1. Share Source IP address
2. Have the the traceroute of DNS
3. Identify and find out the exact problem with all error code and take screen shot
if possible
4 check the DNS IPs are being used by the customer.
5.Provide Nslookup Logs of destinations.
===================================================================================
=====================================================================

mac address :sh mac address-table int Gi8/31


===================================================================================
==============================================

Dear Customer ,

===================================================================================
==============================================================
PuTTy:-202.92.239.194
===================================================================================
================================================
In MPLS LINK NO internet is sharing ...check on HUb location
===================================================================================
===========================================
/32 255.255.255.255 1
/31 255.255.255.254 2
/30 255.255.255.252 4
/29 255.255.255.248 8 usage 6
/28 255.255.255.240 16 usage 14
/27 255.255.255.224 32 usage 30
/26 255.255.255.192 64 usage 62

===================================================================================
================================

http://ping.eu/ping/

==================================================================

Dear Customer,

Subjected link is up and working fine and 3 MB is properly configured at Bharti


end, please check the link on single PC directly to the Bharti modem/mux at your
end to check the speed issue and revert observation & with Duplex setting at your
end. Putting the SR in resolved state for next 24 hrs before the closer, kindly let
us know if any issue arises.

Link is facing slow browsing due to Bandwidth choking issue at CE end, please
maintain the consumption to resolve the issue or upgrade the link, NO ALARMS FOUND
AND TRAFFIC RUNNING FINE AT MEDIA PART , ALL KLMS ARE UP AND ACTIVE.

===================================================================================
=================================================================

SCHMID PORT ENABLING PROCESS:-

Advanced>>Protocol>>New Entry>>Service Name>>New Server


Ports>>Protocol>>TCP>>Destination Ports>>Single>>Port No>>
Again then for UDP Ports.>>OK>>OK

===================================================================================
======================================
Dear Customer,

Subjected link is up and working fine and no issue detected at Bharti end for the
mailing issue port 25 and 110 are open at Bharti end. issue arises due to suspected
IP blacklisting issue, please check & white list the same or check local mailing
server setting. Putting the SR in resolved state for next 24 hrs before the
closer, kindly let us know if any issue arises. No filtering/ no access list or
policy applied at Bharti end for concern issue and destination is reachable from
Bharti network without any issue.
No port blocking, no filtering or policy applied at Bharti end for concern issue.

For Whitelisting the IP:


Go to: http://mxtoolbox.com/blacklists.aspx
Enter the IP: ?
Click the red tab "click here for some suggestion"
Fill the form and submit the form
===================================================================================
======================================

JAISINGH 8826291226

===================================================================================
========
Route Server"-154.11.63.86
==========================================================================
For Checkig Trace:-

http://ubs.flagtel.com/lg

======================================================================

Route Server Ip-154.11.63.86


================================================
file zila...

ftp://182.79.252.246
USERNAME- ftpuser `
Passwod :-Airtel@123

Singpore:
ftp://182.79.247.66
USERNAME- guest
Passwod: guest@999
======================================================================

As discussed Please verify Bandwidth of 26mb with help of WAN Killer software or
FTP Server on single system directly connected with bharti MUX in unlive
environment .

If you will face the issue then Please share the logs so that after this if we
found the issue then align FE at your end for end to end testing of BW.

Note: AUTO OFF,100MB,FULL DUPLEX

FTP Server IP : 202.56.215.5


User name : noc
Password : Lucent@noc

===========================================================
Please provide the below mentioned details for DNS issue.
1. Share Source IP address
2. Have the the traceroute of DNS
3. Identify and find out the exact problem with all error code and take screen shot
if possible
4 check the DNS IPs are being used by the customer.
5.Provide Nslookup Logs of destinations.
=====================================================
MROTEK NATTING PROCESS:-

MRotec logs>>>> DEL-ISP-MPL-ACC-RTR-10#telnet 182.71.186.170


Trying 182.71.186.170 ... Open
Username: admin
Password:
Mro-tek-Router> en
Mro-tek-Router# sh running-config
!config
user administrator admin local secret Hg6MAD7MGTUEcoT9gHG+LhDc6E07QwG71SmiEodL/f
QT/YirzsAURqDjk69469y authorized-table telecomadmin
user administrator useradmin local secret CIW6wsU811r3kwZZDvQLRGibh4KTcS3VrPKgb2
oRwUEmC0VpH30kLaLAfYiCgow authorized-table useradmin
user administrator guest local secret opYG5kjYSuHpbbJsxMA9WXo73z8ze3SphHMF8qDEHP
58YLAZDYJrFxjN16spO1g authorized-table user
!
timezone 57
!
interface vlan1
ip address 192.168.1.2/24
ip address 182.71.186.97/29 secondary
interface eth0
auto-negotiate off
interface eth1
interface eth2
interface eth3
interface shdsl
ip address 182.71.186.170/30
no switchport
stu-mode stu-c
wire-mode two-wire
!
!
basic firewall set switch off
basic firewall set securityLevel low
ip route 0.0.0.0/0 182.71.186.169
!
ip nat alg h323 disable
ip nat alg rtsp disable
ip nat source shdsl any any any interface 1
!
macAddrFilter disable
macAddrFilter set type deny
!end
Mro-tek-Router#
Mro-tek-Router#
Mro-tek-Router# configure t
Mro-tek-Router(config)# no ip nat 1
Mro-tek-Router(config)# address local
Mro-tek-Router(config-addr)# net-adress 192.168.1.0/24
% Unknown command.
Mro-tek-Router(config-addr)# net-address 192.168.1.0/24
Mro-tek-Router# ip nat pool secondary 182.71.186.97 182.71.186.97
Mro-tek-Router(config)# ip nat source shdsl local any any secondary
Mro-tek-Router(config)# wr m
Building configuration...

Current configuration:
Mro-tek-Router(config)# ^Z
Mro-tek-Router# sh running-config
!config
user administrator admin local secret Hg6MAD7MGTUEcoT9gHG+LhDc6E07QwG71SmiEodL/f
QT/YirzsAURqDjk69469y authorized-table telecomadmin
user administrator useradmin local secret CIW6wsU811r3kwZZDvQLRGibh4KTcS3VrPKgb2
oRwUEmC0VpH30kLaLAfYiCgow authorized-table useradmin
user administrator guest local secret opYG5kjYSuHpbbJsxMA9WXo73z8ze3SphHMF8qDEHP
58YLAZDYJrFxjN16spO1g authorized-table user
!
timezone 57
!
interface vlan1
ip address 192.168.1.2/24
ip address 182.71.186.97/29 secondary
interface eth0
auto-negotiate off
interface eth1
interface eth2
interface eth3
interface shdsl
ip address 182.71.186.170/30
no switchport
stu-mode stu-c
wire-mode two-wire
address local
net-address 192.168.1.0/24
!
!
!
basic firewall set switch off
basic firewall set securityLevel low
ip route 0.0.0.0/0 182.71.186.169
!
ip nat alg h323 disable
ip nat alg rtsp disable
ip nat pool secondary 182.71.186.97 182.71.186.97
!
ip nat source shdsl local any any secondary 1
!
macAddrFilter disable
macAddrFilter set type deny
!end
Mro-tek-Router#

============================================================================

59.145.12.XX
===================================================================================

You might also like