0% found this document useful (0 votes)

177 views125 pages

B.Tech ME 16 17

The document outlines the study and evaluation scheme for the Bachelor of Technology (Mechanical Engineering) program offered by Teerthanker Mahaveer University. The 4-year program is divided into 8 semesters with the medium of instruction being English. In each semester, students must earn credits through courses that have both internal and external assessments. The internal evaluation considers factors like class tests, assignments, and attendance while the external evaluation consists of semester-end exams. Students must obtain a minimum of 188 credits out of 196 to be eligible for the degree.

Uploaded by

Anuj Maurya

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

177 views125 pages

B.Tech ME 16 17

Uploaded by

Anuj Maurya

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 125

Study & Evaluation Scheme

Bachelor of Technology
(Mechanical Engineering)
[Applicable for Academic Session 2016-17]
[Approved by AC meeting dated March 25, 2017 & Hon’ble VC dated August 08, 2017]
[With revision approved by VC date July 23, 2018 & August 14, 2018]

TEERTHANKER MAHAVEER UNIVERSITY

N.H.-24, Delhi Road, Moradabad, Uttar Pradesh-244001
Website: www.tmu.ac.in

B.Tech (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 1

TEERHANKER MAHAVEER UNIVERSITY
(Established under Govt. of U. P. Act No. 30, 2008)
Delhi Road, Bagarpur, Moradabad (U.P)

Study & Evaluation Scheme

Bachelor of Technology
SUMMARY
Programme : B.Tech (Mechanical Engineering)
Duration : Four-year full time (Eight Semesters)
Medium : English
Minimum Required Attendance : 75 %
Credit :
Maximum Credit :
: 196
Minimum credit required for the :
degree 188
Assessment Internal External Total
:
40 60 100
Class Class Class Total
Test Test Test Assignment(s) Attendance
Internal Evaluation (Theory I II III
Papers) Best two out of three
10 10 10 10 10 40
Marks Marks Marks Marks Marks Marks
Internal External Total
Project Phase-I :
100 - 100
Evaluation of Practical/Industrial
Internal External Total
Training/ Project Phase-II :
50 50 100
External Internal
Duration of Examination :
3 hrs. hrs

(To qualify the course a student is required to secure a minimum of 45% marks in aggregate in
each course including the semester-end examination and the teacher’s continuous evaluation shall be
essential for passing the course and earning its assigned credits. A candidate, who secures less than
45% marks in a course, shall be deemed to have failed in that course.)

Question Paper Structure

1. The question paper shall consist of six questions. All six are compulsory. First question shall be of
short answer type (not exceeding 50 words). Question No. 1 shall contain 8 parts representing all
units of the syllabus and students shall have to answer any five (weightage 2 marks each).
2. Remaining five questions will be one from each unit with internal choice. The student has to answer
one of the two in each question. The weightage of Question No. 2 to 6 shall be 10 marks each.
3. Usually each question in the examination should be designed to have a numerical component, where
part of syllabus.

B.Tech (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 2

Note 1:

Evaluation Scheme for MOOC, Short Term Courses:

University allows students to undertake additional subjects/course(s) (In-house offered by the university
through collaborative efforts or courses in the open domain by various internationally recognized
universities) and to earn additional credits on successful completion of the same. Each course will be
approved in advance by the University following the standard procedure of approval and will be granted
credits as per the approval.
Keeping this in mind the Academic Council in its 10th meeting on February 13, 2016, approved the
University proposal and allowed a maximum of two credits to be allocated for MOOC courses. In the pilot
phase it is proposed that a student undertaking and successfully completing a MOOC course through edX,
Coursera, IIRS and NPTEL could be given a maximum credit of two with 1 credit for credit with 30-60
contact hours and 2 credits for courses having more than 60 credit hours.

For smooth functioning and monitoring of the scheme the following shall be the guidelines for MOOC
courses, Add-on courses carried out by the College from time to time.
1. There shall be a MOOC co-ordination committee in the College with a faculty at the level of
Professor heading the committee and all Heads of the Department being members of the
Committee.
2. The Committee will list out courses to be offered during the semester, which could be requested by
the department or the students and after deliberating on all courses finalise a list of courses to be
offered with credits defined for each course and the mode of credit consideration of the student.
The complete process including the approval of the Vice Chancellor shall be obtained by the
College before end of June and end of December for Odd and Even semester respectively of the
year in which the course is being offered. In case of MOOC course the approval will be valid only
for the semester on offer.
3. A student can opt for a maximum of two MOOC courses for credit during the complete duration of
the course other than offered under SWAYAM.
4. College can offer upto 20% credit through courses offered by SWAYAM. However, if the college
is offering courses on other MOOC platforms, the total credit offered under MOOC will not exceed
20% including those offered under SWAYAM.
5. Students will register for the course and the details of the students enrolling under the course along
with the approval of the Vice Chancellor will be forwarded to the Examination department within
fifteen days of start of the semester by the Co-ordinator MOOC through the Principal of the
College.
6. Where the MOOC course or Add-on on courses are only offering certificate of successful
completion, and credit has been assigned to the course, the University examination division will
conduct a MCQ examination for the course with 50 MCQ with 100 marks to facilitate inclusion of
the courses in CPI computation.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 3

7. College will define whether the credits are regular credits or to be considered only in case a student
fails to secure minimum required credits then the additional subject(s) shall be counted for
calculating the minimum credits required for the award of degree.
8. In case the College wants the additional course to be shown in the mark sheet as additional course
completed by the students the same shall also be mentioned by the College and the student will opt
for the same at the time of taking admission to the course.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 4

Study & Evaluation Scheme

Semester I

S. Course Subject Periods Credit Evaluation Scheme

No Code L T P Internal External Total
1 EAS111 Engineering Mathematics-I 3 2 - 4 40 60 100
EAS112/212 Engineering Physics
2 3 2 - 4 40 60 100
EAS113/213 Engineering Chemistry
EEE111/211 Basic Electrical Engineering
3 3 2 - 4 40 60 100
EEC111/211 Basic Electronics Engineering
4 EAS114 Environmental Science 1 2 - 2 40 60 100
30-
5 EHM 111 Foundation English – I 1 1 2 2 40 Written 100
30-Viva
EAS162/262 Engineering Physics (Lab)
6 - 2 1 50 50 100
EAS163/263 Engineering Chemistry (Lab)
Basic Electrical Engineering
EEE161/261
(Lab)
7 - - 2 1 50 50 100
Basic Electronics Engineering
EEC161/261
(Lab)
EME161/261 Engineering Drawing (Lab)
8 - - 4 2 50 50 100
EME162/262 Workshop Practice (Lab)
Total 11 9 10 20 350 450 800

Semester II

S. Course Periods Credit Evaluation Scheme

Subject
No Code L T P Internal External Total
1 EAS211 Engineering Mathematics-II 3 2 - 4 40 60 100
EAS112/212 Engineering Physics
2 3 2 - 4 40 60 100
EAS113/213 Engineering Chemistry
EEE111/211 Basic Electrical Engineering
3 3 2 - 4 40 60 100
EEC111/211 Basic Electronics Engineering
Computer Basics & C
4 ECS201 3 - - 3 40 60 100
Programming
5 EHM 261 Language Lab I - - 4 2 50 50 100
EAS162/262 Engineering Physics (Lab)
6 - - 2 1 50 50 100
EAS163/263 Engineering Chemistry (Lab)
Basic Electrical Engineering
EEE161/261
(Lab)
7 - - 2 1 50 50 100
Basic Electronics Engineering
EEC161/261
(Lab)
Computer Basics & C
8 ECS251 - - 2 1 50 50 100
Programming (Lab)
EME161/261 Engineering Drawing (Lab)
9 - 4 2 50 50 100
EME162/262 Workshop Practice (Lab)
Total 12 6 14 22 410 490 900

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 5

Semester III

S. Course Subject Periods Credit Evaluation Scheme

No. Code L T P Internal External Total
1 EME311 Engineering Mechanics 3 1 - 4 40 60 100
EME312 Engineering
2 3 1 - 4 40 60 100
Thermodynamics
3 EME313 Material Science 3 1 - 4 40 60 100
4 EME314 Industrial Engineering 3 - - 3 40 60 100
5 EHM311 Operations Research 3 1 - 4 40 60 100
6 EME361 Machine Drawing (Lab) - - 3 2 50 50 100
EME362 Engineering
7 - - 3 2 50 50 100
Thermodynamics (Lab)
8 EME363 Material Science (Lab) - - 3 2 50 50 100
Discipline & General
9 EGP311 - - - 1 100 - 100
Proficiency
Total 15 4 9 26 450 450 900

Following additional Course for Lateral Entry Students with B.Sc. background to be
taken in III semester and all should pass with minimum of 45% marks for obtaining the
degree: credits will not be added

1 EME161/261 Engineering Drawing (Lab) - - 4 - 50 50 100

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 6

Semester IV

S. Course Periods Evaluation Scheme

Subject Credit
No. Code L T P Internal External Total
1 EME411 Strength of Material 3 1 - 4 40 60 100
2 EME412 Production Technology – I 3 - - 3 40 60 100
EME413 Measurement, Metrology
3 3 1 - 4 40 60 100
& Control

4 EME414 Fluid Mechanics 3 1 - 4 40 60 100

EHM449/
English communication
5 EHM349/ 1 1 2 2 40 60 100
and soft skills – III
BHM349
Production Technology-I
6 EME461 - - 3 2 50 50 100
(Lab)
EME462 Measurement, Metrology
7 - - 3 2 50 50 100
& Control (Lab)
8 EME463 Fluid Mechanics (Lab) - - 3 2 50 50 100
Discipline & General
9 EGP411 - - - 1 100 - 100
Proficiency
Total 13 4 11 24 450 450 900

Following additional Courses for Lateral Entry Students with B.Sc. background to be taken
in IV semester and all should pass with minimum of 45% marks for obtaining the degree:
credits will not be added

1 EME162/262 Workshop Practice (Lab) - - 4 - 50 50 100

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 7

Semester V

S. Course Subject Periods Credit Evaluation Scheme

No Code L T P Interna External Total
l
1 EME511 Production Technology –II 3 1 - 4 40 60 100
2 EME512 Dynamics of Machines 3 - - 3 40 60 100
3 EME513 Heat & Mass Transfer 3 1 - 4 40 60 100

4 Automobile Engineering 3 - - 3 40 60 100

EME514
ECS511/
611/411/
5 Database Management System 3 1 - 4 40 60 100
MSC014/
BCS311
6 EME561 Production Technology-II (Lab) - - 3 2 50 50 100

7 EME562 Dynamics of Machines (Lab) - - 3 2 50 50 100

8 Heat & Mass Transfer (Lab) - - 3 2 50 50 100

EME563

9 MOOC01 MOOC Program -I (Optional) - - - 1/2 - 100 100

Discipline & General

10 EGP511 - - - 1 100 - 100
Proficiency
Total 15 3 9 25 450 450 1000

Semester VI

S. Course Subject Periods Credit Evaluation Scheme

No Code L T P Internal External Total
1 Refrigeration & Air
EME611 3 1 - 4 40 60 100
Conditioning
2 EME612 Mechanical Vibrations 3 - - 3 40 60 100

3 EME613 Design of Machine Elements 3 - - 3 40 60 100

EEE614/ Non-Conventional Energy
4 3 1 - 4 40 60 100
EEE712 Resources
5 EHM611 Operations Management 3 - - 3 40 60 100
EHM699/
6 English Communication and
EHM599/ 1 1 2 2 50 50 100
Soft Skills-IV
BHM499
7 Refrigeration & Air 100
EME661 - - 3 2 50 50
Conditioning (Lab)
8 EME662 Solid works (Lab) - - 3 2 50 50 100
MOOC Program -II
9 MOOC02 - - - 1/2 - 100 100
(Mandatory)
Discipline & General
10 EGP611 - - - 1 100 - 100
Proficiency
Total 16 3 8 25/26 450 550 1000

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 8

Semester VII

S. Course Subject Periods Credit Evaluation Scheme

No Code L T P Internal External Total
Computer Aided Design
1 EME711 3 - - 3 40 60 100
(CAD)
2 EME712 IC Engines 3 - - 3 40 60 100
Departmental Elective-I
3 EME713 Power Plant Engineering
3 1 - 4 40 60 100
EME714 Hydraulic Machines

Open Elective-I

FOE011 Principle of Management

FOE012 Artificial Neural Network

FOE013 Industrial Sociology

4
3 1 - 4 40 60 100
FOE014 Organizational Behaviour
Engineering and Managerial
FOE015
Economics
Network security &
FOE016
cryptography
Computer Aided Design -
5 EME761 - 3 2 50 50 100
(Lab)
6 EME762 IC Engines (Lab) - - 3 2 50 50 100
Industrial Training &
7 EME792 Presentation - - - 4 50 50 100
(6 weeks)
Project Work Phase-1
(Synopsis, Literature Survey
8 EME798 - - 8 4 100 - 100
& Presentation & 30% Project
completion)
MOOC Program -III
9 MOOC03 - - - 1/2 - 100 100
(Mandatory)

Discipline & General

10 EGP711 - - - 1 100 - 100
Proficiency
Total 12 2 14 28/29 510 490 1000

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 9

Semester VIII

S. Course Periods Evaluation Scheme

Subject Credit
No Code L T P Internal External Total
EME811 Computer Aided Manufacturing
1 3 1 - 4 40 60 100
(CAM)
Departmental Elective-II
Unconventional Manufacturing
EME812
2 Process 3 1 - 4 40 60 100
EME813 Mechatronics
Open Elective-II
Machine learning & Data
FOE021
Analytics
3 FOE022 Total Quality Management
FOE023 Entrepreneurship 3 1 - 4 40 60 100
FOE024 Big Data & Hadoop
FOE025 Financial Management
EME861 Computer Aided Manufacturing
4 - - 3 2 50 50 100
(CAM) (Lab)
Unconventional Manufacturing
EME862
Process (Lab) - - 3 2 50 50 100
5
EME863 Mechatronics (Lab)
Project Work Phase -II
(100 % working condition,
6 EME898 report analysis, plagiarism - - 14 7 50 50 100
check report analysis
Simulation, and Presentation)
7 MOOC04 MOOC Program -IV (Optional) - - - 1/2 - 100 100
Discipline & General
8 EGP811 - - - 1 100 - 100
Proficiency
Total 9 3 20 24 370 330 800

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 10

Semester I
Engineering Mathematics-I
Course Code: EAS111 L T P C
3 2 0 4
Objective:
 To familiarize the basics of matrices, differential calculus, multiple integrals and vector
calculus.
 To solve all problems related to matrices, calculus and vectors.

Unit A (Unit A is for building a foundation and shall not be a part of examination)
Some general theorem on deviation-Derivative of the sum or difference of two function, Derivative
of product of two functions, Derivative of quotient, Derivative of Trigonometry function,
Derivative of inverse Trigonometry function, Logarithms differential, Integration of 1/x, ex,
Integration by simple substitution. Integrals of the type f' (x), [f (x)] n, f   x  , Integration of 1/x,
f x
ex, tan x, cot x, sec x, cosecx , Integration by parts, Integration using partial fractions.

Course Contents-
Unit I (Lectures 08)
Determinants- Rules of computation; Linear Equations and Cramer’s rule.
Matrices: Elementary row and column transformation; Rank of matrix; Linear dependence;
Consistency of linear system of equations; Characteristic equation; Cayley-Hamilton Theorem
(without proof); Eigen values and Eigen vectors; Complex and Unitary matrices.

Unit II (Lectures 08)

Differential Equation--First order first degree Differential equation: variable separable,
Homogeneous method, Linear differential equation method, Exact Differential equation.
Sets and Functions- Elementary set theoretic operations, De Morgan’s law, Convex sets,
Relations and Correspondences, Number systems; Sequences and series – convergence; Open and
Closed sets; Limits and Continuity.

Unit III (Lectures 08)

Differential Calculus: Leibnitz theorem; Partial differentiation; Euler’s theorem; Change of
variables; Expansion of function of several variables. Jacobians, Error function.
Unit IV (Lectures 08)
Multiple Integrals: Double integral, Triple integral, Beta and Gamma functions; Dirichlet
theorem for three variables, Liouville’s Extension of Dirichlet theorem.

Unit V (Lectures 08)

Vector Differentiation:
Vector function, Differentiation of vectors, Formulae of Differentiation, Scalar and Vector point
function, Geometrical Meaning of Gradient, Normal and Directional Derivative, Divergence of a
vector function, Curl of a vector
Vector Integration:
Green’s theorem , Stokes’ theorem; Gauss’ divergence theorem.

Text Books-
1. Grewal B.S., Higher Engineering Mathematics, Khanna Publishers.
2. Prasad C., Engineering Mathematics for Engineers, Prasad Mudralaya.
3. Dass H.K., Engineering Mathematics Vol-I, S. Chand.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 11

Reference Books-
1. Kreyszig E., Advanced Engineering Mathematics, Wiley Eastern.
2. Piskunov N, Differential & Integral Calculus, Moscow Peace Publishers.
3. Narayan Shanti, A Text book of Matrices, S. Chand

*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 12

Semester I
Engineering Physics
Course Code: EAS112/212 L T P C
3 2 0 4
Objective: To understand the fundamentals of physics like interference of light, diffraction,
Polarization, elements of material science, special theory of relativity etc.

Unit A (Unit A is for building a foundation and shall not be a part of examination)
Optics- Properties of light, Lance, Mirror, Focal length, Intensity, Power, Eye-piece, Work,
Energy and its types, Waves, longitudinal and transverse waves, Time period, Frequency

Course Contents-
Unit-I (08 Lectures)
Interference of Light: Introduction, Principle of Superposition, Interference due to division of
wavefront: Young’s double slit experiment, Theory of Fresnel’s Bi-Prism, Interference due to
division of amplitude: parallel thin films, Wedge shaped film, Michelson’s interferometer,
Newton’s ring.

Unit-II (08 Lectures)

Diffraction: Introduction, Types of Diffraction and difference between them, Condition for
diffraction, difference between interference and diffraction. Single slit diffraction: Quantitative
description of maxima and minima with intensity variation, linear and angular width of central
maxima. Resolving Power: Rayleigh’s criterion of resolution, resolving power of diffraction
grating and telescope.

Unit-III (08 Lectures)

Polarization: Introduction, production of plane polarized light by different methods, Brewster’s
and Malu’s Laws. Quantitative description of double refraction (Huygen’s theory for explanation-
mathematical derivation), Nicol prism, Quarter & half wave plate, specific rotation, Laurent’s half
shade polarimeter.

Unit-IV (08 Lectures)

Elements of Material Science: Introduction, Bonding in solids, Covalent bonding and Metallic
bonding, Classification of Solids as Insulators, Semi-Conductor and Conductors, Intrinsic and
Extrinsic Semiconductors, Conductivity in Semiconductors, Determination of Energy gap of
Semiconductor. Hall Effect: Theory, Hall Coefficients and application to determine the sign of
charge carrier, Concentration of charge carrier, mobility of charge carriers.

Unit-V (08 Lectures)

Special Theory of Relativity: Introduction, Inertial and non-inertial frames of Reference,
Postulates of special theory of relativity, Galilean and Lorentz Transformations, Length
contraction and Time Dilation, Relativistic addition of velocities, Variation of mass with velocity,
Mass-Energy equivalence.

Text Books:
1. Elements of Properties of Matter, D.S.Mathur, S.Chand & Co.
2. Engineering Physics, Bhattacharya & Tandon, Oxford University Press.
3. Optics, Ajoy Ghatak, Tata Mc Graw-Hill.
4. H. K. Malik & A.K. Singh, Engineering Physics, McGraw-Hill, latest edition.

Reference Books:
1. F. A. Jenkins and H. E. White, Fundamentals of Optics, McGraw-Hill.
2. Concept of Modern Physics, Beiser, Tata McGraw-Hill.
3. R. Resnick, Introduction to Special Relativity, John Wiley, Singapore.
B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 13
*Latest editions of all the suggested books are recommended.

Semester I
Engineering Chemistry
Course Code: EAS113/213 L T P C
3 2 0 4

Objective: To understand the fundamentals of chemistry like water and its Industrial Applications,
Fuels and Combustion, Lubricants, Polymers, chemical analysis etc.

Course Contents-
UNIT I (Lecture 08)
Water And Its Industrial Applications: Sources, Impurities, Hardness and its units, Industrial
water, characterstics, softening of water by various methods (External and Internal
treatment).Boiler trouble causes effects and remedies .Characteristic of municipal water and its
treatment. Numerical problem based on water softening method like lime soda, calgen etc.

UNIT II (Lecture 08)

Fuels and Combustion: Fossil fuel and classification, calorific value, determination of calorific
value by bomb and Jumker’s calorimeter, proximate and ultimate analysis of coal and their
significance, calorific value computation based on ultimate analysis data, Combustion and its
related numerical problems carbonization manufacturing of coke, and recovery of byproduct,
knocking relationship between knocking and structure and hydrocarbon, improvement ant
knocking characteristic IC Engine fuels, Diesel Engine fuels, Cetane Number.

UNIT III (Lecture 08)

Lubricants: Introduction, mechanism of lubrication, classification of lubricant, properties and
testing of lubricating Oil Numerical problem based on testing methods. Cement and
Refractories: Manufacture, IS code, Setting and hardening of cement, Portland cement Plaster of
Paris, Refractories. Introduction, classification and properties of refractories.

UNIT IV (Lecture 08)

Polymers: Introduction, types and classification of polymerization, reaction mechanism, Natural
and synthetic rubber, Vulcanization of rubber ,preparation, properties and uses of the following
Polythene, PVC, PMMA, Teflon, Polyacrylonitrile, PVA, Nylon 6,Terylene,Phenol
Formaldehyde, Urea Formaldehyde Resin, Glyptal, Silicones Resin, Polyurethanes, Butyl Rubber,
Neoprene, Buna N, Buna S.

UNIT V (Lecture 08)

A. Instumental Techniques in chemical analysis: Introduction, Principle, Instrumentation and
application of IR, NMR, UV, Visible, Gas Chromatography, Lambert and Beer’s Law.
B. Water Analysis Techniques
Alkalinity, Hardness (Complexometric), Chlorides, Free Chlorine, DO, BOD, and COD,
Numerical Problem Based on above techniques.

Text Books:
1. Agarwal R. K., Engineering Chemistry, Krishna Prakashan.
2. Lee I.D., Inorganic Chemistry.
3. Chawla Shashi, Engineering Chemistry, Dhanpat Rai Publication.
Reference Books:
1. Morrison & Boyd, Organic Chemistry, Prentice Hall
2. Barrow Gordon M., Physical Chemistry, McGraw-Hill.
3. Manahan Stanley E., Environmental Chemistry, CRC Press.
*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 14

Semester I
Basic Electrical Engineering
Course Code: EEE111/211 L T P C
3 2 0 4

Objective- To understand the fundamental concept of Electrical Engineering like D.C. Network,
A.C. Network, Measuring Instruments, Energy Conversion Devices etc.
Course Contents-
Unit I (Lectures 08)
D.C. Network Theory: Passive, active, bilateral, unilateral, linear, nonlinear element, Circuit
theory concepts-Mesh and node analysis; Voltage and current division, source transformation,
Network Theorems- Superposition theorem, Thevenin’s theorem, Norton’s theorem, tellegens
theorem and Maximum Power Transfer theorem; Star Delta transformation.

Unit II (Lectures 08)

Steady State Analysis of A.C. Circuits: Sinusoidal and phasor representation of voltage and
Current; Single phase A.C. circuit behaviour of resistance, inductance and capacitance and their
Combination in series & parallel; Power factor; Series and parallel resonance; Band width and
Quality factor, magnetic circuit.

Unit III (Lectures 08)

Measuring Instruments: Introduction and construction of energy meters and wattmeter.
Three Phase A.C. Circuits: Line and phase voltage/current relations; three phase power, power
measurement using two wattmeter method. Introduction to earthing and electrical safety.

Unit IV (Lectures 08)

Single phase Transformer: Principle of operation; Types of construction; Phasor diagram;
Equivalent circuit; Efficiency and losses.
D.C. Machines: Principles of electromechanical energy conversion; E.M.F. equation, Types of
D.C. machines and its applications; speed control of DC shunt motor.

Unit V (Lectures 08)

Single phase Motors: Principle of operation and methods of starting of induction motor.
Three phase induction Motor: Principle of operation; Types and methods of starting; slip-torque
characteristics; Applications.
Synchronous Machines: Principle of Operation of Alternator and synchronous motor

Text Books-
1. V. Del Toro, Principles of Electrical Engineering, Prentice-Hall International.
2. W.H. Hayt & J.E. Kemmerly, Engineering Circuit Analysis, McGraw Hill.
3. Nagrath I.J., Basic Electrical Engineering, Tata McGraw Hill.

Reference Books-
1. Fitzgerald A.E & Higginbotham., D.E., Basic Electrical Engineering, McGraw Hill.
2. A Grabel, Basic Electrical Engineering, McGraw Hill.
3. Cotton H., Advanced Electrical Technology, Wheeler Publishing.
*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 15

Semester I
Basic Electronics Engineering
Course Code: EEC111/211 L T P C
3 2 0 4

Objective- To understand the basic concept of Electronics Engineering like p-n Junction, Bipolar
Junction Transistor, Field Effect Transistor, Operational Amplifier and switching theory.
Course Contents
UNIT I (Lectures 08)
p-n Junction: Energy band diagram in materials, Intrinsic & Extrinsic Semiconductor,
Introduction to PN-Junction, Depletion layer, V-I characteristics, p-n junction as rectifiers (half
wave and full wave), calculation of ripple factor of rectifiers, clipping and clamping circuits, Zener
diode and its application as shunt regulator.

UNIT II (Lectures 08)

Bipolar Junction Transistor (BJT): Basic construction, transistor action; CB, CE and CC
configurations, input/output characteristics, Relation between α, β & γ, Biasing of transistors:
Fixed bias, emitter bias, potential divider bias.

UNIT III (Lectures 08)

Field Effect Transistor (FET): Basic construction of JFET; Principle of working; concept of
pinch-off condition & maximum drain saturation current; input and transfer characteristics;
Characteristics equation; fixed and self biasing of JFET amplifier; Introduction of MOSFET;
Depletion and Enhancement type MOSFET- Construction, Operation and Characteristics.

UNIT IV (Lectures 08)

Operational Amplifier (Op-Amp): Concept of ideal operational amplifier; ideal and practical
Op-Amp parameters; inverting, non-inverting and unity gain configurations, Applications of Op-
Amp as adders, difference amplifiers, integrators and differentiator.

UNIT V (Lectures 08)

Switching Theory: Number system, conversion of bases (decimal, binary, octal and hexadecimal
numbers), Addition & Subtraction, BCD numbers, Boolean algebra, De Morgan’s Theorems,
Logic gates and truth truth table- AND, OR & NOT, Flip-Flops –SR, JK and D type, seven
segment display & K map.

Text Books-
1. Robert Boylestad & Louis Nashelsky, Electronic Circuit and Devices, Pearson India.
2. Millman & Halkias, Integrated Electronics, McGraw Hill.
3. Millman & Halkias, Electronics Devices and Circuits, McGraw Hill.
4. Morris Mano M., Digital Design, Prentice Hall.

Reference Books-
1. Sedra and Smith, Microelectronic Circuits, Oxford University Press.
2. Gayakwad, R A, Operational Amplifiers and Linear Integrated circuits, Prentice Hall of India
Pvt. Ltd.
3. Chattopadhyay D and P C Rakshit, Electronics Fundamentals and Applications, New Age
International.
*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 16

Semester I
Environmental Science
[EAS114 amended vide approval dt. August 08, 2017 of V.C]
Course Code: EAS114 L T P C
1 2 0 2
Objective: To create awareness among students about environment protection.

Course Content:
Unit I (Lectures 08)
General: Definition and Scope of environmental science, multidisciplinary nature of
environmental science, Segments of Environment
Ecology And Environment: Concept of an Ecosystem- its components and functions,
Definition and Scope of Ecology. Tropic Levels-Producer, Consumer and Decomposer,
Energy Flow in an Ecosystem, Food Chain, Food Web and Ecological Pyramid
Biogeochemical Cycles

Unit II (Lectures 08)

Air pollution: Various segments of Atmosphere and their Significance, Sources and Effects Of
Air Pollution, Classification of Air Pollutants, Stationary and Mobile Sources of Air Pollution
Water pollution: Water Resources of the Earth and Indian Scenario, Point and non-Point
sources of Water Pollution, Treatment of Water Pollution, Eutrophication

Unit III (Lectures 08)

Sources and Consequences of - Soil pollution, Noise pollution and Thermal pollution
Ill-effects of fireworks-Constituents of fireworks (gases and metals), Impacts of fireworks on
human health (Potential impact of firework on respiratory health) and environment, Safety
measures (do’s and don’ts), Brief idea of laws related to fireworks.

Unit IV (Lectures 08)

Major environmental problems
Photochemical Smog, Acid Rain, Global Warming (Greenhouse Effect), Ozone Layer - Its
Depletion and Control Measures, El-Nino,Solid Wastes- Pollution, Treatment & Disposal,
Deforestation- causes and effects. Bioremediation, Biological Magnification

Unit V (Lectures 08)

Bio-Diversity- Hot Spots of Biodiversity in India and World, Conservation, Importance and
Factors Responsible for Loss of Biodiversity, Biogeoraphical Classification of India
Concept of Sustainable Development,
Dams and Reservoirs- Their Benefits and Problems
Environment Conservation Movement in India (Chipko Movement, Appiko Movement),

Text Books:
1. “Environmental Chemistry”, De,A.K., New Age Publishers Pvt. Ltd.
2. “Introduction to Environmental Engineering and Science”, Masters,G.M., Prentice Hall
India Pvt.Ltd.
3. “Fundamentals of Ecology”, Odem,E.P., W.B. Sannders Co.

Reference Books:
1. “Biodiversity and Conservation”, Bryant,P.J., Hypertext Book
2. “Textbook of Environment Studies”, Tewari, Khulbe & Tewari, I.K. Publication
3. Trivedi, R.K., Handbook of Environmental Laws, Rules, Guidelines, Compliances
and Standards, Vol I and II, Environment Media.

*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 17

Semester I
Foundation English – I
[EHM111 amended vide approval dt. August 08, 2017 of V.C]

Course Code: EHM111 L T P C

1 1 2 2
Module -1
Introduction to English language (Lecturer 12)
a) Need of knowing language
b) Importance of language in present/scenario
c) Importance of spoken language
Module -2
Introduction to Personnel (Lecturer 12)
a) Self Introduction
b) Motivation , Positive attitude & Body Language
Module -3
Functional Grammar (Lecturer 12)
a) Parts of Speech
b) Tenses and Modals
Module -4
Writing Skills (Lecturer 12)
a) Applications
b) Short passages on given topics

Lab Exercise
(24 hours)
In collaboration with outside expert.

1. Activity Based Sessions

2. Asking the students to speak on given topics
3. Oral Exercises

Text books-
1. Raman Meenakshi & Sharma Sangeeta, Technical Communication: Principles & Practices,
Oxford University Press, New Delhi.
2. Asha Kaul- Business Communication Second Edition, PHI Private Limited, New Delhi
3. Martin & Wren - High School English Grammar & Composition, S.Chand & Co. Delhi.
Reference Books:

1. Remedial English Language by Malti Agarwal, Krishna Prakashan Media (P) Ltd., Meerut.
2. English Grammar Composition & Usage by J.C. Nesfield, Macmillan Publishers
3. The Business letters by Madan Sood, Goodwill Publishing House, New Delhi
4. Communication Skills by Sanjay Kumar &PushpLata, Oxford University Press

*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 18

Semester I
Engineering Physics Lab
Course Code: EAS162/262 L T P C
0 0 2 1
LIST OF EXPERIMENTS
Note: Select any ten experiments from the following list.
1. To determine the wavelength of monochromatic light by Newton’s ring.
2. To determine the wavelength of monochromatic light by Michelson-Morley experiment.
3. To determine the wavelength of monochromatic light by Fresnel’s Bi-prism.
4. To determine the Planck’s constant using LEDs of different colours.
5. To determine the specific rotation of cane sugar solution using Polarimeter.
6. To verify Stefan’s Law by electrical method.
7. To study the Hall Effect and determine Hall coefficient and mobility of a given semiconductor
material using Hall-effect set up.
8. To determine the Frequency of an Electrically Maintained Tuning Fork by Melde’s
experiment.
9. To compare Illuminating Powers by a Photometer.
10. To determine the frequency of A.C. mains by means of a Sonometer.
11. To determine refractive index of a prism material by spectrometer.
12. To determine the Flashing & Quenching of Neon bulb.
13. Determination of Cauchy’s constant by using spectrometer.
14. To study the PN junction characteristics.
15. To determine the resolving power and dispersive power by a prism.
16. To determine the value of Boltzmann Constant by studying Forward Characteristics of a
Diode.
17. Study the characteristics of LDR.
18. To study the characteristics of a photo-cell.

Books:
1. B.Sc. Practical Physics, Gupta and Kumar, Pragati prakashan.
2. B.Sc. Practical Physics, C.L. Arora, S.Chand & Campany Pvt. Ltd.

*Latest editions of all the suggested books are recommended.

Evaluation Scheme of Practical Examination:

Internal Evaluation (50 marks)
Each experiment would be evaluated by the faculty concerned on the date of the experiment on a
5-point scale which would include the practical conducted by the students and a Viva taken by the
faculty concerned. The marks shall be entered on the index sheet of the practical file.

Evaluation scheme:
PRACTICAL PERFORMANCE & VIVA
DURING THE SEMESTER (30 MARKS) ATTENDANCE VIVA TOTAL
EXPERIMENT FILE WORK VIVA (10 MARKS) (10 MARKS) INTERNAL
(10 MARKS) (10 MARKS) (10 MARKS) (50 MARKS)

External Evaluation (50 marks)

The external evaluation would also be done by the external Examiner based on the experiment
conducted during the examination.

EXPERIMENT FILE WORK VIVA TOTAL EXTERNAL

(20 MARKS) (10 MARKS) (20 MARKS) (50 MARKS)

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 19

Semester I
Engineering Chemistry Lab
Course Code: EAS163/263 L T P C
0 0 2 1
LIST OF EXPERIMENTS
Note: Select any ten experiments from the following list.
1. Determination of Total Hardness of a given water sample.
2. Determination of mixed alkalinity (a) Hydroxyl & Carbonate (b) Carbonate & Bicarbonate
3. To determine the pH of the given solution using pH meter and pH-metric titration.
4. Determination of dissolved oxygen content of given water sample.
5. To find chemical oxygen demand of waste water sample by potassium dichromate
6. Determination of free chlorine in a given water sample.
7. To determine the chloride content in the given water sample by Mohr’s method.
8. To prepare the Bakelite resin polymer.
9. To determine the concentration of unknown sample of iron spectrophotometrically.
10. To determine the viscosity of a given sample of a lubricating oil using Redwood
Viscometer.
11. To determine the flash & fire point of a given lubricating oil.
12. Determination of calorific value of a solid or liquid fuel.
13. Determination of calorific value of a gaseous fuel.
14. Determination of % of O2, CO2 % CO in flue gas sample using Orsat apparatus.
15. Proximate analysis of coal sample.

Evaluation Scheme of Practical Examination:

External Evaluation (50 marks)

The external evaluation would also be done by the external Examiner based on the experiment
conducted during the examination.
EXPERIMENT FILE WORK VIVA TOTAL EXTERNAL
(20 MARKS) (10 MARKS) (20 MARKS) (50 MARKS)

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 20

Semester I
Basic Electrical Engineering Lab
Course Code: EEE161/261 L T P C
0 0 2 1
LIST OF EXPERIMENTS-
Note: Select any ten experiments from the following list.
1. To verify the Kirchhoff’s current and voltage laws.
2. To study multimeter.
3. To verify the Superposition theorem.
4. To verify the Thevenin’s theorem.
5. To verify the Norton’s theorem.
6. To verify Tellegens theorem
7. To verify the maximum power transfer theorem.
8. To verify current division and voltage division rule.
9. To measure energy by a single phase energy meter.
10. To measure the power factor in an RLC by varying the capacitance
11. To determine resonance frequency, quality factor, bandwidth in series resonance.
12. To measure the power in a 3-phase system by two-wattmeter method
13. To measure speed for speed control of D.C. Shunt Motor.
14. To determine the efficiency of single-phase transformer by load test.

Evaluation Scheme of Practical Examination:

PRACTICAL PERFORMANCE & VIVA

DURING THE SEMESTER (30 MARKS) ATTENDANCE VIVA TOTAL
EXPERIMENT FILE WORK VIVA (10 MARKS) (10 MARKS) INTERNAL
(10 MARKS) (10 MARKS) (10 MARKS) (50 MARKS)

External Evaluation (50 marks)

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 21

Semester I
Basic Electronics Engineering Lab
Course Code: EEC161/261 L T P C
0 0 2 1
LIST OF EXPERIMENTS
Note: Minimum eight experiments should be performed-
1. To study the V-I characteristics of p-n junction diode.
2. To study the diode as clipper and clamper.
3. To study the half-wave rectifier using silicon diode.
4. To study the full-wave rectifier using silicon diode.
5. To study the Zener diode as a shunt regulator.
6. To study transistor in Common Base configuration & plot its input/output characteristics.
7. To study the operational amplifier in inverting & non-inverting modes using IC 741.
8. To study the operational amplifier as differentiator & integrator.
9. To study various logic gates & verify their truth tables.
10. To study half adder/full adder & verify their truth tables.

Evaluation Scheme of Practical Examination:

Internal Evaluation (50 marks)

Each experiment would be evaluated by the faculty concerned on the date of the experiment on a
5-point scale which would include the practical conducted by the students and a Viva taken by the
faculty concerned. The marks shall be entered on the index sheet of the practical file.

Evaluation scheme:

PRACTICAL PERFORMANCE & VIVA

DURING THE SEMESTER (30 MARKS) ATTENDANCE VIVA TOTAL
EXPERIMENT FILE WORK VIVA (10 MARKS) (10 MARKS) INTERNAL
(10 MARKS) (10 MARKS) (10 MARKS) (50 MARKS)

External Evaluation (50 marks)

The external evaluation would also be done by the external Examiner based on the experiment
conducted during the examination.

EXPERIMENT FILE WORK VIVA TOTAL EXTERNAL

(20 MARKS) (10 MARKS) (20 MARKS) (50 MARKS)

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 22

Semester I
Engineering Drawing Lab
Course Code: EME161/261 L T P C
0 0 4 2
LIST OF EXPERIMENTS-[All to be performed]
1. To write all Numbers (0 to 9) and alphabetical Letters (A to Z) as per the standard
dimensions.
2. To draw the types of lines and conventions of different materials.
3. To draw and study dimensioning and Tolerance.
4. To construction geometrical figures of Pentagon and Hexagon
5. To draw the projection of points and lines
6. To draw the Orthographic Projection of given object in First Angle
7. To draw the Orthographic Projection of given object in Third Angle
8. To draw the sectional view of a given object
9. To draw the development of the lateral surface of given object
10. To draw the isometric projection of the given orthographic projection.

Evaluation Scheme of Practical Examination:

Internal Evaluation (50 marks)
Each experiment would be evaluated by the faculty concerned on the date of the experiment on a
5-point scale which would include the drawing sheet by the students and a Viva taken by the
faculty concerned. The marks shall be given on the drawing sheet & regard maintained by the
faculty.

Evaluation scheme:
PRACTICAL PERFORMANCE & VIVA
DURING THE SEMESTER (30 MARKS) ATTENDANCE VIVA TOTAL
Drawing FILE WORK VIVA (10 MARKS) (10 MARKS) INTERNAL
Sheet (10 MARKS) (10 MARKS) (50 MARKS)
(10 MARKS)

External Evaluation (50 marks)

The external evaluation would also be done by the external Examiner based on the experiment
conducted during the examination.

Drawing Sheet FILE WORK VIVA TOTAL EXTERNAL

(20 MARKS) (10 MARKS) (20 MARKS) (50 MARKS)

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 23

Note: The drawing sheet could be manual or in Auto CAD.

Semester I
Workshop Practice Lab
Course Code: EME162/262 L T P C
0 0 4 2
List of Experiments:
(Perform any ten experiments selecting at least one from each shop.)
Carpentry Shop:
1. To prepare half-lap corner joint.
2. To prepare mortise & tenon joint.
3. To prepare a cylindrical pattern on woodworking lathe.
Fitting Bench Working Shop:
1. To prepare a V-joint fitting
2. To prepare a U-joint fitting
3. To prepare a internal thread in a plate with the help of tapping process
Black Smithy Shop:
1. To prepare a square rod from given circular rod
2. To prepare a square U- shape from given circular rod
Welding Shop:
1. To prepare a butt and Lap welded joints using arc welding machine.
2. To prepare a Lap welded joint Gas welding equipment.
3. To prepare a Lap welded joint using spot welding machine.
Sheet-metal Shop:
1. To make round duct of GI sheet using ‘soldering’ process.
2. To prepare a tray of GI by fabrication
Machine Shop:
1. To study the working of basic machine tools like Lathe m/c, Shaper m/c, Drilling m/c and
Grinding m/c.
2. To perform the following operations on Centre Lathe:
Turning, Step turning, Taper turning, Facing, Grooving and Knurling
3. To perform the operations of drilling of making the holes on the given metallic work-piece
(M.S.) by use of drilling machine.
Foundry Shop:
1. To prepare core as per given size.
2. To prepare a mould for given casting.

Evaluation Scheme of Practical Examination:

Internal Evaluation (50 marks)

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 24

External Evaluation (50 marks)
The external evaluation would also be done by the external Examiner based on the experiment
conducted during the examination.

EXPERIMENT FILE WORK VIVA TOTAL EXTERNAL

(20 MARKS) (10 MARKS) (20 MARKS) (50 MARKS)

Semester II
Engineering Mathematics- II
Course Code: EAS211 L T P C
3 2 0 4
Objective:
To familiarize the basic concept of Differential Equations, Laplace Transform, Fourier series
etc.

Course Contents-
Unit I (Lectures 08)
Differential Equations: Linear Differential Equation, Linear Differential Equation with constant
coefficient: Complementary functions and particular integrals, Linear Differential Equation with
variable coefficient: Removal method, changing independent variables, Method of variation of
parameters, Homogeneous Linear Differential Equation, Simultaneous linear differential equations.

Unit II (Lectures 08)

Series Solutions: Power Series solutions of ODE, Ordinary Point, Singular Points, Frobenius Method.
Special Functions: Legendre equation and Polynomial, Legendre Function, Rodrigue’s formula,
Laplace definite integral for first and second kind, Bessel equation and Polynomial, Bessel Function,
Orthogonal properties and Recurrence Relation for Legendre and Bessel function.

Unit III (Lectures 08)

Partial differential equations – Method of separation of variables for solving partial differential
equations; Wave equation up to two dimensions; Laplace equation in two-dimensions; Heat conduction
equations up to two-dimensions; Equations of transmission Lines.

Unit IV (Lectures 08)

Fourier Series: Periodic functions, Trigonometric series; Fourier series; Dirichlet’s conditions,
Determination of fourier coefficient by Euler’s formulae; Fourier series for discontinuous functions,
Even and odd functions, Half range sine and cosine series.

Unit V (Lectures 08)

Laplace Transform: Laplace transform; Existence theorem; Laplace transform of derivatives and
integrals; Inverse Laplace transform; Unit step function; Diratch delta function; Laplace transform of
periodic functions; Convolution theorem; Application to solve simple linear differential equations.

Text Books-
1. Grewal B.S., Higher Engineering Mathematics, Khanna Publishers.
2. Prasad C., Engineering Mathematics for Engineers, Prasad Mudralaya.
3. Das H.K., Engineering Mathematics Vol-II, S. Chand.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 25

*Latest editions of all the suggested books are recommended.

Semester II
Engineering Physics
Course Code: EAS212/112 L T P C
3 2 0 4
Objective: To understand the fundamentals of physics like interference of light, diffraction,
Polarization, elements of material science, special theory of relativity etc.

Unit-II (08 Lectures)

Unit-III (08 Lectures)

Unit-IV (08 Lectures)

Unit-V (08 Lectures)

Text Books:
1. Elements of Properties of Matter, D.S.Mathur, S.Chand & Co.
2. Engineering Physics, Bhattacharya & Tandon, Oxford University Press.
3. Optics, Ajoy Ghatak, Tata Mc Graw-Hill.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 26

4. H. K. Malik & A.K. Singh, Engineering Physics, McGraw-Hill, latest edition.
Reference Books:
1. F. A. Jenkins and H. E. White, Fundamentals of Optics, McGraw-Hill.
2. Concept of Modern Physics, Beiser, Tata McGraw-Hill.
3. R. Resnick, Introduction to Special Relativity, John Wiley, Singapore.

*Latest editions of all the suggested books are recommended.

Semester II
Engineering Chemistry
Course Code: EAS213/113 L T P C
3 2 0 4

Objective: To understand the fundamentals of chemistry like water and its Industrial Applications,
Fuels and Combustion, Lubricants, Polymers, chemical analysis etc.
Course Contents-
UNIT I (Lecture 08)
Water And Its Industrial Applications: Sources, Impurities, Hardness and its units, Industrial
water, characterstics, softening of water by various methods (External and Internal
treatment).Boiler trouble causes effects and remedies .Characteristic of municipal water and its
treatment. Numerical problem based on water softening method like lime soda, calgen etc.

UNIT II (Lecture 08)

UNIT III (Lecture 08)

UNIT IV (Lecture 08)

Polymers: Introduction, types and classification of polymerization, reaction mechanism, Natural
and synthetic rubber, Vulcanization of rubber, preparation, properties and uses of the following
Polythene, PVC, PMMA, Teflon, Polyacrylonitrile, PVA, Nylon 6, Terylene, Phenol
Formaldehyde, Urea Formaldehyde Resin, Glyptal, Silicones Resin, Polyurethanes, Butyl Rubber,
Neoprene, Buna N, Buna S.

UNIT V (Lecture 08)

Text Books:
1. Agarwal R. K., Engineering Chemistry, Krishna Prakashan.
2. Lee I.D., Inorganic Chemistry.
3. Chawla Shashi, Engineering Chemistry, Dhanpat Rai Publication.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 27

Reference Books:
1. Morrison & Boyd, Organic Chemistry, Prentice Hall
2. Barrow Gordon M., Physical Chemistry, McGraw-Hill.
3. Manahan Stanley E., Environmental Chemistry, CRC Press.

*Latest editions of all the suggested books are recommended.

Semester II
Basic Electrical Engineering
Course Code: EEE211/111 L T P C
3 2 0 4
Objective- To understand the fundamental concept of Electrical Engineering like D.C. Network,
A.C. Network, Measuring Instruments, Energy Conversion Devices etc.
Course Contents-
Unit I (Lectures 08)
D.C. Network Theory: Passive, active, bilateral, unilateral, linear, nonlinear element, Circuit
theory concepts-Mesh and node analysis; Voltage and current division, source transformation,
Network Theorems- Superposition theorem, Thevenin’s theorem, Norton’s theorem, tellegens
theorem and Maximum Power Transfer theorem; Star Delta transformation.

Unit II (Lectures 08)

Unit III (Lectures 08)

Unit IV (Lectures 08)

Unit V (Lectures 08)

Reference Books-

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 28

1. Fitzgerald A.E & Higginbotham., D.E., Basic Electrical Engineering, McGraw Hill.
2. A Grabel, Basic Electrical Engineering, McGraw Hill.
3. Cotton H., Advanced Electrical Technology, Wheeler Publishing.

*Latest editions of all the suggested books are recommended.

Semester II
Basic Electronics Engineering
Course Code: EEC211/111 L T P C
3 2 0 4

UNIT II (Lectures 08)

UNIT III (Lectures 08)

UNIT IV (Lectures 08)

UNIT V (Lectures 08)

Reference Books-
1. Sedra and Smith, Microelectronic Circuits, Oxford University Press.
2. Gayakwad, R A, Operational Amplifiers and Linear Integrated circuits, Prentice Hall of
India Pvt. Ltd.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 29

3. Chattopadhyay D and P C Rakshit, Electronics Fundamentals and Applications, New Age
International.

*Latest editions of all the suggested books are recommended.

Semester II
Computer Basics & C Programming
Course Code: ECS201 L T P C
3 0 0 3
Objective: To learn the basics of computers & C programming language.
Course Contents:
Unit I (Lectures 08)
Concepts in Computer Application: Definition of Electronic Computer; History; Generations;
Characteristics and Application of Computers; Classification of Computers; Functional
Component of Computer: CPU, I/O devices, Type of Memory & Memory Hierarchy, Firmware
and Human ware.
Data and data types: Definitions, data, data types: Integer, Character, Float, String, etc.;
Constants and Variable Declaration; Token; Keyboard; Identifier.

Unit II (Lectures 08)

Programming Language Classification & Computer Languages: Generation of Languages;
Introduction to 4GLs; Translators; Assemblers; Compilers; Interpreters. Number System: Decimal,
Octal, Binary and Hexadecimal & their Conversions; Various Code: BCD, ASCII and EBCDIC
and Gray Code.
Operators and Expressions: Numeric and relation operators; logical operator; bit operator;
operator
precedence and associatively.

Unit III (Lectures 08)

Internet and Web Technologies: Hypertext Markup Language; WWW; Gopher; FTP; Telnet;
Web Browsers; Search Engines; Email.
Control Structure: while statement, if, else, Nested if else statement. Nested logic: for loop, do-
while loop, loop inside a loop structure, Switch Statement. Break and default with switch.

Unit IV (Lectures 08)

Concepts in Operating Systems: Elementary Concepts in Operating Systems; Textual Vs GUI
Interface.
Arrays: Notation and representation; Manipulation of array elements; Multidimensional arrays.

Unit V (Lectures 08)

Functions & Strings: Definition; Declaration; Call by Value; Call by Reference; Returns values
and their types; Function calls.

Text Books-
1. Sinha P. K., Computer Fundamentals, BPB Publications.
2. Yadav, DS, Foundations of IT, New Age.
3. Curtin, Information Technology: Breaking News, Tata McGraw Hill.
Reference Books-
B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 30
1. Peter Nortans, Introduction to Computers, Tata McGraw Hill.
2. Leon & Leon, Fundamental of Information Technology, Vikas Publishing.
3. Kanter, Managing Information System, Prentice-Hall.

*Latest editions of all the suggested books are recommended.

Semester II
Language Lab I
[EHM261 amended vide approval dt. August 08, 2017 of V.C]

Course Code: EHM261 L T P C

0 0 4 2

1. Written exercises based on Grammar portion covered in 1st semester. (08 hours)
2. Common conversation practice (making small talk etc.) (10 hours)
3. JAM Session (just a minute session) on various topics. (10 hours)
4. Paper presentations. (10 hours)
5. Describing a scene, picture, situation, etc. (10 hours)

Evaluation Scheme of Examination:

Internal Viva-Voce: 50

Body Language Time Knowledge You Confidence Total

& Voice Management of the Approach & Attitude
Modulation Topic

10 10 10 10 10 50

External Viva-Voce: 50
External viva will be conducted by external faculty or faculty member of other college of TMU.

Body Language Time Knowledge You Confidence Total

& Voice Management of the Approach & Attitude
Modulation Topic

10 10 10 10 10 50

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 31

Semester II
Engineering Physics Lab
Course Code: EAS262/162 L T P C
0 0 2 1
LIST OF EXPERIMENTS
Note: Select any ten experiments from the following list.
1. To determine the wavelength of monochromatic light by Newton’s ring.
2. To determine the wavelength of monochromatic light by Michelson-Morley experiment.
3. To determine the wavelength of monochromatic light by Fresnel’s Bi-prism.
4. To determine the Planck’s constant using LEDs of different colours.
5. To determine the specific rotation of cane sugar solution using Polarimeter.
6. To verify Stefan’s Law by electrical method.
7. To study the Hall Effect and determine Hall coefficient and mobility of a given
semiconductor material using Hall-effect set up.
8. To determine the Frequency of an Electrically Maintained Tuning Fork by Melde’s
experiment.
9. To compare Illuminating Powers by a Photometer.
10. To determine the frequency of A.C. mains by means of a Sonometer.
11. To determine refractive index of a prism material by spectrometer.
12. To determine the Flashing & Quenching of Neon bulb.
13. Determination of Cauchy’s constant by using spectrometer.
14. To study the PN junction characteristics.
15. To determine the resolving power and dispersive power by a prism.
16. To determine the value of Boltzmann Constant by studying Forward Characteristics of a
Diode.
17. Study the characteristics of LDR.
18. To study the characteristics of a photo-cell.

Books:
1. B.Sc. Practical Physics, Gupta and Kumar, Pragati prakashan.
2. B.Sc. Practical Physics, C.L. Arora, S.Chand & Campany Pvt. Ltd.

*Latest editions of all the suggested books are recommended.

Evaluation Scheme of Practical Examination:

External Evaluation (50 marks)

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 32

Semester II
Engineering Chemistry Lab
Course Code: EAS263/163 L T P C
0 0 2 1
LIST OF EXPERIMENTS:
Note: Select any ten experiments from the following list.

1. Determination of Total Hardness of a given water sample.

2. Determination of mixed alkalinity (a) Hydroxyl & Carbonate (b) Carbonate & Bicarbonate
3. To determine the pH of the given solution using pH meter and pH-metric titration.
4. Determination of dissolved oxygen content of given water sample.
5. To find chemical oxygen demand of waste water sample by potassium dichromate
6. Determination of free chlorine in a given water sample.
7. To determine the chloride content in the given water sample by Mohr’s method.
8. To prepare the Bakelite resin polymer.
9. To determine the concentration of unknown sample of iron spectrophotometrically.
10. To determine the viscosity of a given sample of a lubricating oil using Redwood
Viscometer.
11. To determine the flash & fire point of a given lubricating oil.
12. Determination of calorific value of a solid or liquid fuel.
13. Determination of calorific value of a gaseous fuel.
14. Determination of % of O2, CO2 % CO in flue gas sample using Orsat apparatus.
15. Proximate analysis of coal sample.

Evaluation Scheme of Practical Examination:

Internal Evaluation (50 marks)

Evaluation scheme:

PRACTICAL PERFORMANCE & VIVA

DURING THE SEMESTER (30 MARKS) ATTENDANCE VIVA TOTAL
EXPERIMENT FILE WORK VIVA (10 MARKS) (10 MARKS) INTERNAL
(10 MARKS) (10 MARKS) (10 MARKS) (50 MARKS)

External Evaluation (50 marks):

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 33

Semester II
Basic Electrical Engineering Lab
Course Code: EEE261/161 L T P C
0 0 2 1
LIST OF EXPERIMENTS-
Note: Select any ten experiments from the following list.
1. To verify the Kirchhoff’s current and voltage laws.
2. To study multimeter.
3. To verify the Superposition theorem.
4. To verify the Thevenin’s theorem.
5. To verify the Norton’s theorem.
6. To verify Tellegens theorem
7. To verify the maximum power transfer theorem.
8. To verify current division and voltage division rule.
9. To measure energy by a single phase energy meter.
10. To measure the power factor in an RLC by varying the capacitance
11. To determine resonance frequency, quality factor, bandwidth in series resonance.
12. To measure the power in a 3-phase system by two-wattmeter method
13. To measure speed for speed control of D.C. Shunt Motor.
14. To determine the efficiency of single-phase transformer by load test.

Evaluation Scheme of Practical Examination:

External Evaluation (50 marks)

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 34

Semester II
Basic Electronics Engineering Lab
Course Code: EEC261/161 L T P C
0 0 2 1
LIST OF EXPERIMENTS-
Note: Minimum eight experiments should be performed-
1. To study the V-I characteristics of p-n junction diode.
2. To study the diode as clipper and clamper.
3. To study the half-wave rectifier using silicon diode.
4. To study the full-wave rectifier using silicon diode.
5. To study the Zener diode as a shunt regulator.
6. To study transistor in Common Base configuration & plot its input/output characteristics.
7. To study the operational amplifier in inverting & non inverting modes using IC 741.
8. To study the operational amplifier as differentiator & integrator.
9. To study various logic gates & verify their truth tables.
10. To study half adder/full adder & verify their truth tables.

Evaluation Scheme of Practical Examination:

External Evaluation (50 marks)

The external evaluation would also be done by the external Examiner based on the experiment
conducted during the examination.

EXPERIMENT FILE WORK VIVA TOTAL EXTERNAL

(20 MARKS) (10 MARKS) (20 MARKS) (50 MARKS)

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 35

Semester II
Computer Basics & C Programming Lab
Course Code: ECS251 L T P C
0 0 2 1
LIST OF EXPERIMENTS-

1. To write a program to calculate Sum & average of N numbers.

2. To write a program to convert integer arithmetic to a given number of day and month.
3. To write a program to find maximum and minimum out of 3 numbers a, b & c.
4. To write a program to find factorial of positive integer.
5. To write a program to find sum of series up to n number, 2+5+8+…………………+n.
6. To write a program to print all the number between 1 to 100 which are dividing by 7.
7. To write a program to generate Fibonacci series up to n.
8. To write a program to implement a function to calculate area of a circle.
9. To write a program to implement a recursive function to calculate factorial of given number.
10. To write a program to find whether number is prime or not.
11. To write a program to find that the enter character is a letter or digit.
12. To write a program to find addition of two matrix of n*n order.
13. To write a program to find multiplication of two matrix of n*n order.
14. To write a program to add 6 digit numbers in even case & multiple 6 digit number in odd case.
15. To write a program to find even or odd up to a given limit n.
16. To write a program to find whether a given no is palindrome or not.
17. To write a program to joining & Comparing the 2 string.

Evaluation of Practical Examination:

Evaluation scheme:

PRACTICAL PERFORMANCE & VIVA

DURING THE SEMESTER (30 MARKS) ATTENDANCE VIVA TOTAL
EXPERIMENT FILE WORK VIVA (10 MARKS) (10 MARKS) INTERNAL
(10 MARKS) (10 MARKS) (10 MARKS) (50 MARKS)

External Evaluation (50 marks)

The external evaluation would also be done by the external Examiner based on the experiment
conducted during the examination.

EXPERIMENT FILE WORK VIVA TOTAL EXTERNAL

(20 MARKS) (10 MARKS) (20 MARKS) (50 MARKS)

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 36

Semester II
Engineering Drawing Lab
Course Code: EME261/161 L T P C
0 0 4 2
LIST OF EXPERIMENTS-(All to be performed)
1. To write all Numbers (0 to 9) and alphabetical Letters (A to Z) as per the standard
dimensions.
2. To draw the types of lines and conventions of different materials.
3. To draw and study dimensioning and Tolerance.
4. To construction geometrical figures of Pentagon and Hexagon
5. To draw the projection of points and lines
6. To draw the Orthographic Projection of given object in First Angle
7. To draw the Orthographic Projection of given object in Third Angle
8. To draw the sectional view of a given object
9. To draw the development of the lateral surface of given object
10. To draw the isometric projection of the given orthographic projection.

Evaluation Scheme of Practical Examination:

External Evaluation (50 marks)

The external evaluation would also be done by the external Examiner based on the experiment
conducted during the examination.

Drawing Sheet FILE WORK VIVA TOTAL EXTERNAL

(20 MARKS) (10 MARKS) (20 MARKS) (50 MARKS)

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 37

Note: The drawing sheet could be manual or in Auto CAD.

Semester II
Workshop Practice Lab
Course Code: EME262/162 L T P C
0 0 4 2
List of Experiments:
(Perform any ten experiments selecting at least one from each shop.)
Carpentry Shop:
1. To prepare half-lap corner joint.
2. To prepare mortise & tenon joint.
3. To prepare a cylindrical pattern on woodworking lathe.
Fitting Bench Working Shop:
1. To prepare a V-joint fitting
2. To prepare a U-joint fitting
3. To prepare a internal thread in a plate with the help of tapping process
Black Smithy Shop:
1. To prepare a square rod from given circular rod
2. To prepare a square U- shape from given circular rod
Welding Shop:
1. To prepare a butt and Lap welded joints using arc welding machine.
2. To prepare a Lap welded joint Gas welding equipment.
3. To prepare a Lap welded joint using spot welding machine.
Sheet-metal Shop:
1. To make round duct of GI sheet using ‘soldering’ process.
2. To prepare a tray of GI by fabrication
Machine Shop:
1. To study the working of basic machine tools like Lathe m/c, Shaper m/c, Drilling m/c and
Grinding m/c.
2. To perform the following operations on Centre Lathe:
Turning, Step turning, Taper turning, Facing, Grooving and Knurling
3. To perform the operations of drilling of making the holes on the given metallic work-piece
(M.S.) by use of drilling machine.
Foundry Shop:
1. To prepare core as per given size.
2. To prepare a mould for given casting.

Evaluation Scheme of Practical Examination:

Internal Evaluation (50 marks)

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 38

External Evaluation (50 marks)
The external evaluation would also be done by the external Examiner based on the experiment
conducted during the examination.

EXPERIMENT FILE WORK VIVA TOTAL EXTERNAL

(20 MARKS) (10 MARKS) (20 MARKS) (50 MARKS)

Semester III
Engineering Mechanics

Course Code: EME311 L T P C

3 1 0 4
Objective:
1. To make students learn and apply basic theories and concepts of equilibrium, Shear force
and Bending moment diagrams in beams for different conditions of loading.
2. To make students learn and understand the concept friction, second moment of Areas, and
forces in various members of Truss.
Course Outcomes: Students would be able to-
1. Determine the resultant of a system of forces.
2. Draw complete and correct free-body diagrams and write the appropriate equilibrium
equations from the free-body diagram.
3. Determine the support reactions on a structure.
4. Determine the connection forces in trusses and in general frame structures.
5. Determine the internal reactions in a beam, draw correct shear-force and bending
moment diagrams.
6. Locate the centroid of an area.
7. Calculate the second moment of an area, calculate the principal second moments of an
area.

Course Contents:
Unit I (Lectures 8)
Force systems and analysis: Concepts of force and force systems; Resultant of force systems;
Determination of Resultant of coplanar, concurrent force system; Resolution and composition of
forces; Resultant of coplanar and non-concurrent force system
Equilibrium: Concepts of equilibrium; Types of loads; Types of supports; Conditions of
equilibrium for coplanar force system; Body constraints and free body diagrams; Moments of a
force; Moment and arm of a couple; Beam reactions;

Unit II (Lectures 8)
Friction: Introduction; Definitions; Types of Friction; Coulomb’s law of friction; Angle of
Repose; simple cases of equilibrium of bodies involving dry fiction.

Unit III (Lectures 8)

Shear Force and Bending Moment
Definitions- Types of beams; Conception of shear Force and Bending Moment- Sign
conventions- Sagging and hogging moments- shear force and bending moment diagrams for
cantilevers and simply supported beams subjected to point load, uniformly distributed loads

Unit IV (Lectures 8)
Properties of Section
Centroid: Centre of gravity and Centroid; Centroid of plane areas; Centroid of Composite areas;
some cases of location of centroid of common areas.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 39

Moment of Inertia: Area Moment of Inertia; Parallel axis theorem; Perpendicular axis theorem;
Polar moment of inertia; Moment of inertia of composite sections; Radius of gyration.

Unit V (Lectures 8)
Trusses: Introduction; Simple Trusses; Types of Trusses; Assumptions; Determination of Forces
in simple trusses members; Methods of joints.
Torsion: Introduction; pure torsion; Theory of pure torsion; assumptions in theory of pure
torsion; Torsional moment of resistance; polar modulus of shafts of circular section; power
transmitted by a circular shaft; Shear stress and twist due to torque.

Text Books:

1. Bansal R. K., “A Text book of Engineering Mechanics”, Laxmi Publications.

2. Kumar D. S., “A Text book of Engineering Mechanics”, S. K. Kataria & Sons.
3. Kumar K. L., “Engineering Mechanics”, Tata McGraw Hill Publication.
4. Khurmi R. S., “Engineering Mechanics”, S. Chand Publications.

Reference Book:

1. S. Ramamrutham, “Strength of materials”, Dhanpat Rai Publishing company

2. Singer F.L “Engineering Mechanics Statics and Dynamics”, Harper International edition

*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 40

Semester III
Engineering Thermodynamics
Course Code: EME312
L T P C
3 1 0 4
Objective:
1. To understand the thermodynamic process and the methods for analyzing thermodynamic
properties.
2. To determine the direction of the process by the analysis of entropy.
3. To understand the property equations and thermodynamic properties of real gases.
4. To acquire basic knowledge of Power cycles and application of thermodynamics in industrial
equipment and to understand the jet propulsion.
Course outcomes: Students would be able to
1. Explain basic concepts such as thermodynamic temperature, equilibrium, and reversibility.
2. Determine the direction of the process from the first and second law of thermodynamics.
3. Be familiar with property equations and thermodynamic properties of real gases.
4. Describe the characteristics of the Brayton power cycles and the method of analysis of cycle.
5. Analyze the Rankine cycle with various configurations to optimize the design of a power plant.
6. Apply the general relations to analysis of jet propulsion.

Course Contents:
Unit I (Lectures 8)
Basic Concepts of Thermodynamics: Definitions, system, control volume, surrounding, boundaries,
universe; Types of systems; Macroscopic and Microscopic viewpoints; Thermodynamic equilibrium;
State, property, process; Cycle - Reversibility - Quasi - static process; Irreversible process; Causes of
irreversibility; Energy in state and in transition; Types of work and heat; Point and path function.

Unit II (Lectures 8)
Laws of Thermodynamics: First law of thermodynamics; Corollaries: First law applied to a Process,
applied to a flow system; Steady flow energy equation; Limitations of the first law; Thermal reservoir;
Heat engine; Heat pump; Parameters of performance; Second law of thermodynamics: Kelvin-Plank and
Clausius statements and their corollaries; PMM; Carnot's principle; Carnot cycle and its specialties;
Thermodynamic scale of temperature; Clausius Inequality; Entropy; Principle of entropy increase; Energy
equation; Availability and irreversibility; Thermodynamic potentials, Gibbs and Helmholtz Functions;
Maxwell relations.
Unit III (Lectures 8)
Properties of Steam and Boiler: Pure substances; P-V-T- surfaces; T-S and h-s diagrams; Phase
transformations: Triple point at critical state properties during change of phase; Dryness Fraction;
Properties of steam; Use of steam table & mollier charts; Steam generators: Classifications, working of
fire tube & water tube boiler, boiler mounting & accessories, drought & its calculation.
Unit IV (Lectures 8)
Vapor Power Cycles: Rankine & modified Rankine cycles; Working of steam engine; Indicator diagram;
Effect of pressure & temperature on Rankine cycle; Reheat cycle; Regenerative cycle; Feed water heater;
Classification of turbines; Comparison with steam engine; Velocity diagram of simple
& compound turbines & related calculations.

Unit V (Lectures 8)
Gas Power Cycle & Jet Propulsion: Gas turbine classifications, Brayton cycle; Principles of gas
turbine; Gas turbine cycles with inter-cooling, reheat & regeneration, stage efficiency, polytrophic
efficiency; Deviation of actual cycles from ideal cycles; introduction to the principal of jet propulsion:
Turbojet & turboprop engines & their processes; Introduction to rocket engine.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 41

Text books-

1. Singh onkar, Applied Thermodynamics, New Age International (p) Publishers Ltd.
2. Ballaney P.L., Thermal Engineering, Khanna Publisher
3. Kearton W.J., Theory of Stream Turbine, I. Pitman.

References books-

1. Rajput R.K. Thermal Engineering, Laxmi Publication

2. Yahya SM. Turbine Compressor & Fans, TMH
3. Ganeshan, Gas Turbine, TMH
4. Yadav R. Heat Engines, CPH Allahabad
5. Nag PK. Engineering Thermodynamics, TMH

*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 42

Semester III
Material Science
Course Code: EME313
L T P C
3 1 0 4
Objective:
1. Give basic knowledge of science behind materials & physical metallurgy.
2. Introduce the concept of basic structure of materials.
3. Lay the groundwork for studies in fields such as solid-state physics, mechanical behavior of
material.
4. To give students a feel of how material science is useful in engineering practices.

Course Outcomes: Students would be able to-

1. Analyze the Structure of materials at different levels, basic concepts of crystalline materials like
unit cell, FCC, BCC, HCP, APF (Atomic Packing Factor).
2. Understand concept of mechanical behavior of materials and calculations of same using
appropriate equations.
3. Explain the concept of phase & phase diagram & understand the basic terminologies associated
with metallurgy. Construction and identification of phase diagrams and reactions.

Course Contents-
Unit I (Lectures 8)
Crystallography and Imperfections: Introduction to material science, Concept of unit cell, space
lattice, Bravais lattices, common crystal structures; Atomic packing factor and density; Miller indices;
X-ray crystallography techniques; Imperfections, Defects & Dislocations in solids.
Mechanical properties and Testing: Stress-strain diagram; Ductile & brittle materials; Toughness,
Hardness, Fracture, Fatigue and Creep; Testing: Strength testing, Hardness testing, Impact testing,
Fatigue testing, Creep testing, Non-destructive testing (NDT).

Unit II (Lectures 8)
Deformation of Metal: Elastic and plastic deformation, mechanism of plastic deformation, twinning,
conventional and true stress strain curves for polycrystalline materials, yield point phenomena, strain
ageing, work hardening, Bauschinger effect, season cracking. Recovery, re-crystallization and grain
growth.
Phase Diagram and Equilibrium Diagram: Unary and Binary diagrams, Phase rules; Types of
equilibrium diagrams: Solid solution type, Eutectic type and combination type; Iron-carbon equilibrium
diagram.

Unit III (Lectures 8)

Ferrous Materials: Iron and steel manufacture, furnaces; Carbon steels, alloy steels and cast irons, and
their properties and uses.
Non-Ferrous Metals and Alloys: Non-ferrous metals such as Cu, Al, Zn, Cr, Ni etc. and its
applications; Various type brass, bronze, bearing materials, its properties and uses; Aluminum alloys
such a Duralumin.

Unit IV (Lectures 8)
Heat Treatment: Heat treatment such as Annealing, Normalizing, Quenching, Tempering and Case
hardening; Time Temperature Transformation (TTT) diagrams.
Magnetic Properties: Concept of magnetism; Dia-, para-, ferro- magnetism; Hysteresis; Soft and hard
magnetic materials; Superconductor; basic concepts and its applications; Meissner effect; Type I & II
superconductors.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 43

Unit V (Lectures 8)
Ceramics: Structure, Properties, Applications; Mechanical /Electrical behavior and processing of
Ceramics.
Plastics: Types of polymers/plastics and their applications; Mechanical behaviors and processing of
plastics; Future of plastics.
Other Materials: Description of material such as optical and thermal materials, Concrete, Smart
materials, Composite materials and their uses.

Text Books:

1. Callister W.D., Material Science & Engineering Addition, Wesly Publishing Co.
2. Van Vlash, Elements of Material Science & Engineering, John Wiley & Sons.
3. Dr. K. M. Gupta, Material Science in Engineering, Umesh Publications.

Reference Books:

1. Raghvan, Material Science, Prentice Hall of India

2. Narula, Material Science, TMH
3. Srivastava, Srinivasan, Science of Materials Engineering, New age.

*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 44

Semester III
Industrial Engineering
Course Code: EME314 L T P C
3 0 0 3
Objective:
1. To learn about productivity, work study, Break Even Analysis.
2. To learn about maintenance management, Job analysis, Job evaluation, and production
planning & control techniques in industry.
Course Outcomes: Students would be able to-
1. Use the techniques, skills of Industrial Engineering in industrial application.
2. Design develop, implement, and improve integrated systems that include people, materials,
information, equipment and energy.

Course Contents:
Unit I (Lectures 8)
Productivity: Introduction, Definition, Measurement of Productivity index, Productivity improvement
techniques.
Work study: Meaning and benefits of work study, Method study, Man machine chart, Work
measurement, Calculation of Standard time, Work sampling, Principles of Motion economy.
Unit II (Lectures 8)
Plant layout and materials Handling: Plant location; Type of layouts; Principles of facility layout;
Principles of material handling; Material Handling equipment.
Production planning and control: Objectives of PPC; PPC functions: routing, scheduling,
Dispatching, Loading & follow-up.
Unit III (Lectures 8)
Break Even Analysis: Purpose; Costs: Overheads, Fixed & variable costs; Steps of Break Even
Analysis Margin of safety; Angle of incidence; Profit volume graph.
Depreciation Analysis: Causes; Obsolescence; Methods.
Maintenance Management: Maintenance, Planning & Control; Maintenance Strategy.

Unit IV (Lectures 8)
Inventory Control: Inventory, classification of inventory, inventory related costs, EOQ model,
Introduction to Supply-chain Management
Quality Control: Introduction, SQC; Single, double & sequential sampling; Introduction to TQM &
bench marking.
Unit V (Lectures 8)
Industrial Ownership: Proprietorship; Partnership; Joint stock & co-operative stores.
Manpower Planning: Process.
Organization: Principles of organization; Development of Organizational charts like line, staff, line
and staff & Functional types.
Job Evaluation & Merit rating: Job analysis; Job description, job evaluation methods, Merit rating,
Wage incentive plans.

Text Books
1. Koontz H. Donnel C.O., Principles of Management: An Analysis of Management Functions, Tata
McGraw Hill.
2. Moore J., Manufacturing Management”, Prentice Hall.
3. Mahajan, Industrial Engineering, Dhanpat Rai & Sons.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 45

Reference Books
1. Khanna O.P., Industrial Engineering & Management, Dhanpat Rai & Sons.
2. Shanker. Ravi, Industrial Engineering, Galgotia Publications.
3. Buffa E.S., Modern Production Operations Management, Wiley Eastern

*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 46

Semester III
Operations Research
Course Code: EHM311 L T P C
3 1 0 4
Objective:
1. To learn the linear programming techniques, decision theory, transportation problems, inventory modules
etc.
2. Duality, and sensitivity analysis. Integer Programming. Network flows. Multi-criteria decision
techniques. Decision making under uncertainty.
Course outcomes: Students would be able to-
1. Identify and develop operational research models from the verbal description of the real system.
2. Understand the mathematical tools that are needed to solve optimization problems.
3. Develop a report that describes the model and the solving technique.
4. Analyse the results and purpose recommendations in decision-making processes in Management
Engineering.

Course Contents:
Unit I (Lectures 8)
Operations Research: History, Characteristics, Models and modelling, General Methodology to solve OR
problem, Applications.
Linear Programming: Applications and Model Formation; Graphical method; Simplex method; Duality in
Linear Programming.

Unit II (Lectures 8)
Transportation Problem: Mathematical model of Transportation problem; Transportation Algorithm; Methods
for finding initial solution: North-West corner method, Least cost method, Vogel’s approximation method; Test
for optimality; Steps of MODI method; Variations in transportation problems: Unbalanced supply and demand,
Degeneracy and its resolution; Alternative optimal solution; Maximization of transportation problem.
Assignment problems: Mathematical model of assignment problems; Hungarian method; Variations of the
assignment problems: Multiple optimal solutions, maximization case; Unbalanced assignment problems.

Unit III (Lectures 8)

Sequencing Problem: Processing of n jobs through two-machines, three-machines, m-machines; Processing two
jobs through m machines.
Decision theory: Steps of Decision making process; Types of Decision making environments; Decision making
under uncertainty; Decision Making under risk; Optimization criterion; Pessimism criterion; Laplace criterion;
Hurwicz criterion; Regret criterion; Expected monetary value (EMV); Expected opportunity loss (EOL);
Expected value of Perfect information (EVPI); Decision Tree analysis

Unit IV (Lectures 8)
Inventory Models: Inventory cost components; EOQ; Deterministic inventory cost models: Inventory model
with constant demand & Instantaneous supply, EOQ model with different rates of demand, EOQ model with
gradual replenishment, Multi-item inventory control models with constraint, EOQ models with warehouse space
constraint; Investment constraint; Average inventory level constraint; Number of orders constraints; Selective
inventory control techniques: ABC analysis, VED analysis, FSN analysis.

Unit V (Lectures 8)
Project Management: PERT & CPM; Network construction; Critical path analysis; Program evaluation and
review technique (PERT); Project Time Cost Trade-Off; Project-crashing.

Text book:
1. Wangner M H., Operations Research , Prentice Hall (January 16, 1970)
2. Sharma S.D., Operations Research, Kedar Nath Ram Nath & Co.
3. Sharma J.K., Operations Research, SK Kataria & sons
4. Kapoor V.K., Operations Research, Sultan Chand & Sons.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 47

Reference book:

1. Rao S. S Optimization Technique, TMH.

2. Taha, Operations Research, PHI

*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 48

Semester III
Machine Drawing (Lab)

Course Code: EME361 L T P C

0 0 3 2
Objectives:
To learn the principles of technical drawing and acquire skills in the use of appropriate computer
aids for effective preparation of 2D models in Machine Drawing.

Part and Assembly drawing:

1. To draw the Conventional representation of materials, common machine elements and parts.
2. To draw the Surface roughness symbols; Machining symbols, indication of surface roughness.
3. To draw the popular forms of screw threads, bolts, nuts, stud bolts, tap bolts, set screws.
4. To draw the riveted joints for plates.
5. To prepare the different types of limits, fits and tolerances.
6. To prepare the part drawing of Cross heads & Eccentrics. (AutoCAD)
7. To draw the Shaft coupling-Spigot and Socket pipe joint. (AutoCAD)
8. To draw the Keys; cotter joints and knuckle joint. (AutoCAD)
9. To prepare the part drawing of Screws jacks &Tailstock. (AutoCAD)
10. To prepare the assembly drawing of Plummer block & stuffing boxes. (AutoCAD)

Reference Books
1. Narayana KL., Machine Drawing, New Age
2. Narayana KL., Production drawing, New Age
3. Nageswara Rao P. Auto CAD 14 for Engineering Drawing, Tata Mac Graw Hill.

*Latest editions of all the suggested books are recommended.

Evaluation Scheme of Practical Examination:

Internal Evaluation (50 marks)
Each experiment would be evaluated by the faculty concerned on the date of the experiment on a 4-
point scale which would include the practical conducted by the students and a Viva taken by the faculty
concerned. The marks shall be entered on the index sheet of the practical file.

Evaluation scheme:

PRACTICAL PERFORMANCE & VIVA DURING THE ON THE DAY OF EXAM

SEMESTER (35 MARKS) (15 MARKS) TOTAL
EXPERIMENT FILE WORK VIVA ATTENDANCE EXPERIMENT VIVA INTERNAL
(5 MARKS) (10 MARKS) (10 MARKS) (10 MARKS) (5 MARKS) (10 MARKS) (50 MARKS)

External Evaluation (50 marks)

The external evaluation would also be done by the external Examiner based on the experiment
conducted during the examination.

EXPERIMENT FILE WORK VIVA TOTAL EXTERNAL

(20 MARKS) (10 MARKS) (20 MARKS) (50 MARKS)

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 49

Semester III
Engineering Thermodynamics (Lab)
Course Code: EME362 L T P C
0 0 3 2
Objective:
1. To understand the basic thermodynamic cycle applicable to internal combustion engines.
2. To understand the working of 2 stroke and 4 stroke engines.
3. To understand the pressure compounded and velocity compounded turbines.
4. To gain knowledge about different boilers used in power plants and industrial applications.

Experiments: Minimum 10 experiments in depth and details out of following according to theory
covered in applied thermodynamics theory subject (EME312)
1. To study of Fire Tube boiler
2. To study of water Tube boiler
3. To study of velocity compounded steam turbine and pressure compounded steam turbine
4. To study of impulse & Reaction turbine
5. To study of steam Engine model.
6. To study and working of two stroke petrol Engine
7. To study and working of Four stroke petrol Engine
8. To determine the Indicated H.P. of I.C. Engine by Morse Test
9. To study of Gas Turbine Model
10. To prepare the energy balance for Diesel/Petrol Engine
11. To study & working of two stroke Diesel Engine
12. To study & working of four stroke Diesel Engine.

Evaluation Scheme of Practical Examination:

Internal Evaluation (50 marks)

Each experiment would be evaluated by the faculty concerned on the date of the experiment on a 4-
point scale which would include the practical conducted by the students and a Viva taken by the faculty
concerned. The marks shall be entered on the index sheet of the practical file.

Evaluation scheme:

PRACTICAL PERFORMANCE & VIVA DURING THE ON THE DAY OF EXAM

SEMESTER (35 MARKS) (15 MARKS) TOTAL
EXPERIMENT FILE WORK VIVA ATTENDANCE EXPERIMENT VIVA INTERNAL
(5 MARKS) (10 MARKS) (10 MARKS) (10 MARKS) (5 MARKS) (10 MARKS) (50 MARKS)

External Evaluation (50 marks)

The external evaluation would also be done by the external Examiner based on the experiment
conducted during the examination.

EXPERIMENT FILE WORK VIVA TOTAL EXTERNAL

(20 MARKS) (10 MARKS) (20 MARKS) (50 MARKS)

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 50

Semester III
Material Science (Lab)
Course Code: EME363 L T P C
0 0 3 2
Objective:
To understand the Mechanical behavior of materials, relating laboratory test results to material structure,
and elements of mechanical analysis.

I. Material Science Lab Experiments: (To conduct at least 5 of the following)

1. To make a plastic mould for small metallic specimen.

2. To prepare a Specimen for micro structural examination-cutting, grinding, polishing, etching.
3. To determine grain Size of a given specimen.
4. To compare microstructures of different specimens (mild steel, gray C.I., brass, copper)
5. To identify the material from 50 common items kept in a box.
6. To study of microstructure of welded component using microscope.

II. Material Testing Lab Experiments: (To conduct at least 5 of the following)

1. To determine Strength of a given mild steel specimen on UTM and plot a stress-strain graph 2.
2. To determine bending Strength and shear strength of a given mild steel specimen on UTM.
3. To determine impact strength using Charpy impact testing machine.
4. To perform hardness test on given mild steel and compare Brinell hardness and Rockwell hardness.
5. To determine Spring index on spring testing machine.
6. To determine fatigue strength fatigue testing machine.
7. To determine deflection of beam and comparison of actual measurement of deflection with dial gauge to the
calculated one, and evaluation of young’s modulus of beam.
8. To determine torsion strength of a rod on torsion testing machine.

Evaluation Scheme of Practical Examination:

Internal Evaluation (50 marks)

Evaluation scheme:

PRACTICAL PERFORMANCE & VIVA DURING THE ON THE DAY OF EXAM

SEMESTER (35 MARKS) (15 MARKS) TOTAL
EXPERIMENT FILE WORK VIVA ATTENDANCE EXPERIMENT VIVA INTERNAL
(5 MARKS) (10 MARKS) (10 MARKS) (10 MARKS) (5 MARKS) (10 MARKS) (50 MARKS)

External Evaluation (50 marks)

The external evaluation would also be done by the external Examiner based on the experiment
conducted during the examination.

EXPERIMENT FILE WORK VIVA TOTAL EXTERNAL

(20 MARKS) (10 MARKS) (20 MARKS) (50 MARKS)

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 51

Semester III
DISCIPLINE & GENERAL PROFICIENCY

Course Code: EGP311 C-1

There shall be continuous evaluation of the student on the following broad parameters:

1. Observance of dress code.

2. Participation in Conferences /Workshops / Seminars.
3. Attendance in guest lectures, invited talks and special technical sessions organized from time to
time.
4. Participation in community projects including NSS.
5. Exhibiting team spirit in different Culture & extra curriculum activities, Department Club activities
of the University and College organized from time to time.
6. Observance of rule & regulations in the College/University, Behavior in Campus Premises, Bus,
hostel mess and hostel.
7. Performance and awards received in different events (sports/ co-curricular activities) organized at
College / University and other level.
8. General behavior
9. Any extraordinary achievement.

The above is an indicative list of parameters on which the students shall be continuously evaluated.
The college may evaluate the student on the specific parameters by informing them through a notice
displayed on the notice board before evaluation. There shall be no external examination for this
course; however, the marks shall be included for calculation of cumulative Performance Index (CPI).

Head of Department would be display GP marks on notice board in prescribed format after IInd &
IIIrd CT in semester:

S Enroll Student Dress Participation Participation Participation Participation Participation General Any Extra
No. Name code in in guest in in Culture & in Behavior Achievement
N Conferences lectures, community extra sports/ co-
o /Workshops invited talks Services curriculum curricular
/ Seminars and special activities, activities
technical Department
sessions Club
Activities
(5) (15) (20) (10) (20) (20) (5) (5)
Sports Coordinator
Department Club
Responsible for

Cultural Events
Coordinator &

Mentor
Coordinator

Director or
Principal
Mentor
Mentor
marks

Head

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 52

Semester IV
Strength of Materials
Course Code: EME411 L T P C
3 1 0 4
Objectives:
1. To make students learn and apply basic theories and concepts of equilibrium, shear force,
bending moment in beams, bending stress, shear stress and stress-strain laws to different
materials for different conditions of loading.
2. To make students learn and understand the concept and theory of deflection of beams,
combined direct and bending stresses.
Course Outcomes: Students would be able to
1. Understand the behavior of materials under different stress and strain conditions.
2. Draw Bending moment, Shear force diagram, Bending stress and Shear stress distribution
diagrams for beams under the different conditions of loading and calculate the deflections.
3. Understand Hoop stress, Longitudinal stress, Shear flow, shear center.

Course Contents:
Unit – I: Simple Stresses and Strains (Lectures 8)
Definitions; Elastic, plastic and rigid materials; Stress, strain-Tensile and compressive stresses;
Shear stresses; Elastic Limit- Hooke’s Law-Stress-Strain curve for mild steel- Yield point- Modulus
of Elasticity- Modular ratio; Modulus of rigidity; Bars of varying sections; Lateral Strain; Poissons
ratio; volumetric strain; Bulk modulus; Relation between the elastic constants. Strain energy;
stresses due to various types of axial loads-gradually applied load suddenly applied and impact
loads.

Unit – II: Shear Force, Bending Moment and Axial force (Lectures 8)
Conception of shear Force and Bending Moment- Sign conventions- Sagging and hogging
moments- shear force and bending moment diagrams for simply supported beams and overhanging
beams, Beams subjected to various types of loading- point load, distribution loads, couples,
Maximum bending moment for a beam, point of contra flexure, Inter relation between Shear force
and bending moment diagrams

Unit – III: Stresses in Beams (Lectures 8)

Definitions- Pure or Simple bending- Theory of simple bending- Neutral axis- Bending stress-
Bending stress distribution- Moment of resistance, Derivation of Bending Equation- Assumption in
the theory of bending- section Modulus, Section modulus for different shapes of beam sections-
Rectangular, Circular, L and T section; Shear stress distribution for a beam section for Rectangular,
I and T Section

Unit – IV: Direct and Bending stresses (Lectures 8)

Introduction-Stress distribution for an eccentrically loaded rectangular and circular section; the
middle third rule; Core or Kernal of a section.
Thin cylinders & spheres: Introduction, difference between thin walled and thick walled pressure
vessels. Thin walled spheres and cylinders, hoop and longitudinal stresses and strains, volumetric
strain.

Unit – V: Deflection of Beams (Lectures 8)

Derivation of differential equation of moment curvature relation, Differential equation relating
deflection and moment shear and load, Deflection of simply supported and overhanging beams
subjected to point and uniformly distributed loads using Macaulay’s method; Boundary conditions.
Principal stresses and strains- Determination of normal stress, tangential stress, Principal stresses,
Principal planes and obliquity by analytical method.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 53

Text Books:
1. S. Ramamrutham & Narain “Strength of Materials”. Dhanpat Rai Publishing Company
2. Rajput R. K, “Strength of Materials: Mechanics of Solids”, S. Chand Limited
Reference Books:
1. Timoshenko S, D.H. Yσung, “Elements of Strength of Materials”, East West Press.
2. Kazami S.M.A., “Mechanics of Solids”, McGraw Hill Education

*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 54

Semester IV
Production Technology –I

Course Code: EME412

L T P C
3 0 0 3
Objective:
1. To study various manufacturing processes like forming, sheet metal working, casting etc.
2. To study the various plastic manufacturing process for solid and hollow products.
3. To correlate the application of riser, gates and runner in predefined mould.
Course Outcomes: Students would be able to
1. Enhance the capability to differentiate between drawing and injection moulding.
2. Enhance the practical approach of Pascal’s law in a hand press machine.
3. Enhance the capacity to roll the product by roller.

Course Contents:
Unit I (Lectures 8)
Introduction: Importance of manufacturing; Economic & technological considerations in
manufacturing; Survey of manufacturing processes; Materials & manufacturing processes for common
items.
Metal Forming Processes: Elastic & plastic deformation, yield criteria; Hot working and cold
working; Load required to accomplish metal forming operation; Analysis (equilibrium equation
method) of forging process with sliding friction, sticking friction and mixed condition for slab and
disc; Work required for forging; Hand, Power, Drop Forging.

Unit II (Lectures 8)
Metal Forming Processes (continued): Analysis of Wire/strip drawing and maximum reduction;
Tube drawing; Extrusion and its application; Conditions for Rolling force and power in rolling;
Rolling mills; Design, lubrication and defects in metal forming processes.

Unit III (Lectures 8)

Sheet Metal working: Presses and their classification; Die & punch assembly and press work
methods and processes; Cutting/Punching mechanism; Blanking and Piercing; Compound
Combination and Progressive die; Flat-face and Inclined-face punch and Load (capacity) needed;
Analysis of forming process like cup/deep drawing and bending.

Unit IV (Lectures 8)
Jigs & Fixtures: Principle of locating & clamping devices; Jigs and Fixtures and their applications.
Manufacturing of Plastic components: Review of plastics and its uses and applications. Injection
moulding and blow moulding; Extrusion of plastic section; Welding of plastics; Resins & adhesives.

Unit V (Lectures 8)
Casting: Basic principle & survey of casting processes; Types of patterns and allowances; Types and
properties of moulding sand; Elements of mould and design considerations, gating, riser, runner, core;
Solidification of casting; Sand-casting; Defects of casting and its remedies; Cupola and crucible
furnace; Die Casting, Centrifugal casting, Investment casting etc.

Text Books:
1. Ghosh and Mallik, Manufacturing Science, East West Pvt ltd
2. Pandey P.C., Production Engg. Science, Standard Publishers Ltd.
3. Jain R.K., Production Technology, Khanna

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 55

Reference Books:

1. Rao P N., Manufacturing Technology, Tata. McGraw Hill

2. Paul Degarmo, Materials and Manufacturing, Macmillan Pub. Company

*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 56

Semester IV
Measurement, Metrology & Control

Course Code: EME413 L T P C

3 1 0 4
Objective:
1. To study principles, process of measurement and methods of measurement.
2. To study about classification of measuring instruments, Selection of measuring instruments.
3. To study measuring systems and accuracy of measurement, precision and accuracy, errors in
measurement.
Course Outcomes: Students would be able to
1. Explain different measuring instruments to measure the qualitative and quantitative
characteristics of different mechanical components.
2. Differentiate the accuracy of instruments.
3. Evaluate quality of job, machine and instruments.
4. Perform calibration of measuring instruments.

Course Contents:
Unit I (Lectures 8)
Mechanical Measurements: Introduction to measurement and measuring instruments; Generalized
measuring system and functional elements; Units of measurement; Static and dynamic performance
characteristics of measurement devices; Calibration, concept of error, sources of error, statistical
analysis of errors;
Sensors and Transducers: Types of sensors; Types of transducers and their characteristics; Signal
transmission and processing devices and systems; Signal display & recording devices.

Unit II (Lectures 8)
Strain Measurement
Strain gauges, various types of metallic resistance strain gauges, Selection and Installation factors for
metallic strain gauge, Strain rosettes, The strain gauge ballast circuit, Wheat stone bridge circuit,
Temperature compensation.
Measurement of Pressure
Gravitational, direct acting, Elastic and indirect type pressure transducers, strain gauge pressure cells,
measurement of high pressure, Measurement of low pressures.
Temperature Measurement
Thermometers, bi-metallic thermocouples, thermistors and pyrometers, Calibration of temperature
measuring devices.
Force, Speed and Torque Measurement:
Load Cells, Dynamometers, Tachometer, Stroboscope, measurement of torque of rotating shafts, The
seismic instruments: vibrometers and accelerometers.

Unit III (Lecture 8)

Metrology and Inspection: Standards of linear measurement-line and end standards; Limit, fits and
tolerances; Interchange-ability and standardization; Linear and angular measurements devices and
systems. Comparators: Sigma, Johansson’s Microkator; Limit gauges classification; Taylor’s Principle
of Gauge design.

Unit IV (Lectures 8)
Measurement of geometric forms: Straightness, Flatness, Roundness; Tool makers microscope,
Profile-projector, autocollimator.
Interferometer: Principle and use of interferometer; optical flat; Measurement of screw threads and
gears.
Surface texture: Quantitative evaluation of surface roughness and its measurement (Taly surf).

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 57

Unit V (Lectures 8)
Controls: Introduction, Concept of Automatic Controls; Open loop & closed loop systems; Servo-
mechanisms;
Block diagrams; Transfer functions; Applications of Laplace Transform in control systems with
simple examples; Representation of control components & Systems; Series & parallel combinations;
Cascade system, Controllers: Introduction to Pneumatic and hydraulic control systems.

Text Books:
1. Beckwith Thomas G, Mechanical Measurements, Narosa Publishing House, N. Delhi.
2. Doeblein E.O., Measurement Systems, Application Design, McGraw Hill.
3. Kumar D.S., Mechanical Measurements and Control, Metropolitan, N. Delhi.

Reference Books:
1. Gupta, I.C., Engineering Metrology, Dhanpat Rai & Sons, New Delhi, 1994
2. Sirohi, R. S. and Radha krishna H.C., Mechanical Measurements, New Age Publishers
3. Jain, R.K., Engineering Metrology, Khanna Publishers.
4. Raven, Automatic Control Theory, McGraw Hill Publishers.
5. Nagrath and Gopal, Control System Engineering, New Age Publishers

*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 58

Semester IV
Fluid Mechanics
Course Code: EME414 L T P C
3 1 0 4
Objectives: The learner is expected to:

1. Develop an appreciation for the properties of fluids.

2. Understand the dynamics of fluid flows and the governing non-dimensional parameters.
3. Study analytical solutions to variety of simplified problems.
4. Apply concepts of mass, momentum, and energy conservation to flows.
5. Grasp the basic ideas of turbulence.
Course Outcomes: Students would be able to
1. Gain a fundamental physical and mathematical understanding of this topic rather than
memorizing the equations and situations.
2. Correctly apply the course content (given in an outline below) to new situations so as to evaluate
potential industrial applications of fluid theory through both physical induction and
mathematical analysis/computation. Such inductive and analytical reasoning will be taught
through classroom examples and homework, while it will be tested on examination.

Course Contents:
Unit – I (Lectures 8)
Fluid and continuum, Physical properties of fluids, Rheology of fluids. Pressure-density-height
relationship, manometers, pressure transducers, pressure on plane and curved surfaces, centre of
pressure, buoyancy, stability of immersed and floating bodies, fluid masses subjected to linear
acceleration and uniform rotation about an axis.

Unit – II (Lectures 8)
Types of fluid flows: Continuum & free molecular flows. Steady and unsteady, uniform and non-
uniform, laminar and turbulent flows, rotational and irrotational flows, compressible and
incompressible flows, subsonic, sonic and supersonic flows, sub-critical, critical and supercritical flows,
one, two and three-dimensional flows, streamlines, continuity equation for 3D and 1D flows,
circulation, stream function and velocity potential. Dimensional analysis, Buckingham’s Pi theorem,
important dimensionless numbers and their significance,

Unit – III (Lectures 8)

Potential Flow: source, sink, doublet and half-body. Equation of motion along a streamline and its
integration, Bernoulli’s equation and its applications- Pitot tube, orifice meter, venturi meter and bend
meter, Hot-wire anemometer and LDA, notches and weirs, momentum equation and its application to
pipe bends. Similarity Laws: geometric, kinematics and dynamic similarity, undistorted and distorted
model studies.

Unit – IV (Lectures 8)
Equation of motion for laminar flow through pipes, Stokes’ law, transition from laminar to turbulent
flow, turbulent flow, types of turbulent flow, isotropic, homogenous turbulence, scale and intensity of
turbulence, measurement of turbulence, eddy viscosity, mixing length concept and velocity distribution
in turbulent flow over smooth and rough surfaces, resistance to flow, minor losses, pipe in series and
parallel, power transmission through a pipe, siphon, water hammer, three reservoir problems and pipe
networks.

Unit – V (Lectures 8)
Boundary layer thickness, boundary layer over a flat plate, laminar boundary layer, application of
momentum equation, turbulent boundary layer, laminar sublayer, separation and its control, Drag and

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 59

lift, drag on a sphere, a two-dimensional cylinder, and an aero foil, Magnus effect. Introduction to
compressible flow.

Text Books:
1. V Gupta and S K Gupta, “Fluid Mechanics and its Applications”, Wiley Eastern Ltd
2. Som and Biswas, “Introduction to Fluid Mechanics and Machines”, Mc Graw Hill Publications
3. Bansal R K, “Fluid Mechanics and Hydraulic Machines”, Laxmi Publications
4. Modi and Seth, “Hydraulics and Fluid Mechanics including Hydraulic Machines”, Standard
Book House.

References:
1. Grade. R J and A G Mirajgaonkar, Engineering Fluid Mechanics (Including Hydraulic
Machines) Nemchand and Bros, Roorkee,
2. Fox & Donald, “Introduction to Fluid Mechanics” John Wiley &Sons Pvt Ltd
3. Cengel & Cimbala, “Fluid Mechanics” TMH, New Delhi.
4. I.H. Shames, “Mechanics of Fluids”, McGraw Hill, Int. Student, Education

*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 60

Semester-IV
English Communication and Soft Skills-III
Course Code: EHM449/349/BHM349 L T P C
1 1 2 2
Objectives:

1. To enable the learners to upgrade their knowledge of grammar and vocabulary to address competitive
exams like GATE.
2. To enable the learner to improve their listening.
3. To enable the learners to improvise their voice modulation in reading and speaking.
4. To enable the learners to enhance their writing and comprehensive skills in English
5. To enable the learners to proactively participate in activities in situational context.

Course Outcomes: At the end of the semester, the learners will be able to
1. Refine their usage of English grammar in day to day context.
2. Acquire adequate knowledge of grammar to address competitive exams like GATE.
3. Use advance English language by using variety of words i.e. idioms and phrase in variety of sentences in
functional context.
4. Improve their listening to understand the basic content.
5. Improvise their voice modulation while reading and speaking something.
6. Enhance writing and comprehensive skills in English.
7. Present simple power point presentation (PPt).
8. Proactively participate in activities in situational context (like impromptu).

Course Contents:
Unit – I Grammar & Vocabulary (14 hours)
 Correction of Common Errors (with recap of English Grammar with its usage in practical context.)
 Synthesis of sentences: Simple, complex and compound Sentences
 Transformation of sentences
 Commonly used Idiom & Phrases (Progressive learning whole semester)

Unit – II Essence of Effective listening & speaking (12 hours)

 Listening short conversation/ recording (TED talks / Speeches by eminent personalities)
Critical Review of these abovementioned
 Voice Modulation: Five P’s - Pace, Power, Pronunciation, Pause, and Pitch.
 Impromptu
 Power Point Presentation (PPt) Skills: Nuances of presenting PPTs

Unit – III Reading and Comprehension Skills (08 hours)

 Strategies of Reading comprehension: Four S’s
 How to solve a Comprehension (Short unseen passage: 150-200 words)
 Reading Newspaper (Progressive learning whole semester)

Unit – IV Writing Skills (06 hours)

 Essentials of a paragraph
 Paragraph writing (100-120 words)

Reference Books:
1. Allen, W. “Living English Structure” Pearson Education, New Delhi.
2. Joseph, Dr C.J. & Myall E.G. “A Comprehensive Grammar of Current English” Inter University Press,
Delhi
3. Wren & Martin “High School English Grammar and Composition” S.Chand & Co.Ltd., New Delhi.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 61

4. Norman Lewis “Word Power Made Easy” Goyal Publications & Distributers, New Delhi.
5. Chaudhary, Sarla “Basic Concept of Professional Communication” Dhanpat Rai Publication, New
Delhi.
6. Kumar Sanjay & Pushplata “Communication Skills” Oxford University Press, New Delhi.
7. Agrawal, Malti “Professional Communication” Krishana Prakashan Media (P) Ltd. Meerut.

Note:

 For effective communication practice, groups will be changed weekly

 Class (above 30 students) will be divided in to two groups for effective teaching.

Evaluation Scheme

Internal Evaluation External Evaluation Total Marks

40 Marks 60 Marks

20 Marks
30 Marks 40 Marks 100
Midway external
(Progressive Evaluation) 10 Marks (Written
assessment
After each unit-completion: (Attendance) Examination)
(Oral Presentation) *
Assignments / oral Presentation

* Parameters of Midway external assessment Oral Presentation

Question
Content Pronunciation Delivery of Content responsiveness TOTAL
05 Marks 05 Marks 05 Marks 05 Marks 20 Marks

Note:
Midway Assessment: To take corrective actions, midway assessment will be conducted by 2-member committee
of Director’s nominee (not by the faculty teaching English courses) and average of the two would be the 20
marks obtained by the students after two units are completed. The marks in sealed envelope will be send to
Examination Department.
Written Examination: There would be four questions with internal choice one from each unit of 10 marks.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 62

Semester IV
Production Technology-I (Lab)
Course Code: EME461 L T P C
0 0 3 2
Objective:
To develop skill to lead various organizational functions that demand application of working knowledge
in the domain of industrial engineering system design, process design and analysis using mechanical
energy and manufacturing process.

List of Experiments:

1. To Prepare a Cylindrical Pattern.

2. To prepare a cylindrical sheet metal work piece with the help of roller.
3. To make a mould (with core) for casting.
4. To determine grain fineness number of Sand.
5. To prepare a component of plastics as per the given drawing using injection moulding.
6. To prepare a component as per the given drawing by hand forging process.
7. To Study the foundry tools.
8. To perform tube bending with a tube-bending machine.
9. To study different types of dies used on a press and to prepare a washer of specified dimension on press.
10. To prepare a wire from a soft material using wire drawing by Extrusion operation.

Evaluation Scheme of Practical Examination:

Internal Evaluation (50 marks)

Evaluation scheme:
PRACTICAL PERFORMANCE & VIVA DURING THE ON THE DAY OF EXAM
SEMESTER (35 MARKS) (15 MARKS) TOTAL
EXPERIMENT FILE WORK VIVA ATTENDANCE EXPERIMENT VIVA INTERNAL
(5 MARKS) (10 MARKS) (10 MARKS) (10 MARKS) (5 MARKS) (10 MARKS) (50 MARKS)

External Evaluation (50 marks)

The external evaluation would also be done by the external Examiner based on the experiment
conducted during the examination.

EXPERIMENT FILE WORK VIVA TOTAL EXTERNAL

(20 MARKS) (10 MARKS) (20 MARKS) (50 MARKS)

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 63

Semester IV
Measurement, Metrology & Control (Lab)
Course Code: EME462 L T P C
0 0 3 2
Objectives:
1. The course covers different aspects of dimensional measurement technology put in a production
context.
2. The intention is to give a good competence in industrial metrology, i.e. knowledge about
traditional and new instrumentation.
3. How to handle and select appropriate measurement tools, how to estimate and avoid
measurement uncertainties and a good understanding of the role of measurement in the
production chain.

List of Experiments-
1. To determine length, width and height of given component using vernier callipers, micrometer,
and compare the result
2. To measure the angle of a given job using bevel protector
3. To Measure angle of given component using sine bar & slip gauges.
4. To measure the dimensional parameters of a given bolt by using profile projector.
5. To measure the speed of the haft using stroboscope and compare with tachometer
6. To check the roundness of a circular rod using dial indicator.
7. To measure pressure using pressure gauge.
8. To measure temperature using RTD and compare with thermometer
9. To check spark plug gap using feeler gauges and measure surface roughness by using Talysurf
10. To compare given component sizes with standard size using dial indicator

Evaluation Scheme of Practical Examination:

Internal Evaluation (50 marks)

External Evaluation (50 marks)

The external evaluation would also be done by the external Examiner based on the experiment
conducted during the examination.

EXPERIMENT FILE WORK VIVA TOTAL EXTERNAL

(20 MARKS) (10 MARKS) (20 MARKS) (50 MARKS)

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 64

Semester IV
Fluid Mechanics (Lab)
Course Code: EME463 L T P C
0 0 3 2
Objective:
1. To understand the basic fluid flow problems.
2. To understand the fundamental equation of fluid mechanics applicable to engineering
equipment.

List of Experiments:
1. To measure the surface tension of a liquid.
2. To determine the meta-centric height of a ship model experimentally.
3. To study the transition from laminar to turbulent flow and to determine the lower critical
Reynolds number.
4. To determine the coefficients of velocity, contraction and discharge of an orifice (or a mouth
piece) of a given shape. Plot the flow net for a given model using the concept of electrical
analogy.
5. To find the velocity distribution in a pipe and hence to compute the discharge by integrating the
velocity profile obtained.
6. To verify the Bernoulli’s theorem.
7. To calibrate an orifice meter and venturimeter and to study the variation of the coefficient of
discharge with the Reynolds number.
8. To calibrate and to determine the coefficient of discharge for rectangular and triangular notches.
9. To verify Darcy’s law and to find out the coefficient of permeability of the given medium.
10. To verify the momentum equations
11. To study the boundary layer velocity profile and to determine boundary layer thickness and
displacement thickness. Also determine the exponent in the power law of velocity distribution.
12. To study the variation of friction factor (f) for turbulent flow in smooth and rough commercial
pipes.
13. To determine the loss coefficients for the various pipe fittings.
14. To study the flow behavior in a pipe bend and to calibrate the cap for discharge measurement.

Evaluation Scheme of Practical Examination:

Internal Evaluation (50 marks)

Each experiment would be evaluated by the faculty concerned on the date of the experiment on a
4-point scale which would include the practical conducted by the students and a Viva taken by the
faculty concerned. The marks shall be entered on the index sheet of the practical file.

External Evaluation (50 marks)

The external evaluation would also be done by the external Examiner based on the experiment
conducted during the examination.

EXPERIMENT FILE WORK VIVA TOTAL EXTERNAL

(20 MARKS) (10 MARKS) (20 MARKS) (50 MARKS)

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 65

Semester IV
DISCIPLINE & GENERAL PROFICIENCY
Course Code: EGP411 C-1

There shall be continuous evaluation of the student on the following broad parameters:

1. Observance of dress code.

Head of Department would be display GP marks on notice board in prescribed format after IInd &
IIIrd CT in semester:

Cultural Events
Coordinator &

Mentor
Coordinator

Director or
Principal
Mentor
Mentor
marks

Head

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 66

Semester V
Production Technology –II

Course Code: EME511 L T P C

3 1 0 4
Objective:
1. To study about metal removing mechanism and surface finish.
2. To study about manufacturing tools, tools nomenclature and tool design.
3. To study about various machining process like turning, threading, milling shaping etc.
4. To study about different machinery like lathe, shaper, turner etc.

Course Outcomes: Student would be able to

1. understand the basics of metal machining.
2. have introductory concepts of various advanced machining processes.
3. understand the design considerations for special features in Machine tools.
4. analysis and design the machine tools structures.

Course Contents:
Unit I (Lectures 8)
Metal Cutting and Machine Tools: Metal Cutting: Mechanics of metal cutting; Geometry of tool and
nomenclature as per ASA system; Orthogonal vs. oblique cutting; Mechanics of chip formation; Types
of chips; Shear angle relationship; Merchant’s force circle diagram; Cutting forces; Power required for
Cutting; Cutting fluids/lubricants; Tool materials; Tool wear and tool life; Machinability; Brief
introduction to machine tool vibration and surface finish.

Unit II (Lectures 8)
(i) Lathe: Principle, Types, Operations; Turret/capstan, Semi/Automatic; Tool layout.
(ii) Shaper, Slotter, Planer: Working principle; Operations; Drives.

Unit III (Lectures 8)

(i) Milling: Milling cutters; Up milling & down milling; Dividing head & indexing; Max chip
thickness & power required.
(ii) Drilling and Boring: Drilling; Drill-bits; Geometry of twist drills; Boring, Reaming tools.

Unit IV (Lectures 8)
Grinding & Super finishing: Grinding: Abrasive; Cutting action; Grinding wheel specifications;
Grinding wheel wear: Attritions wear, fracture wear; Dressing and Truing; Maximum chip thickness
and Guest criteria; Surface grinding, Cylindrical grinding and Centerless grinding.
Super finishing: Honing, lapping, and polishing.

Unit V (Lectures 8)
Metal Joining (Welding): Survey of welding and allied processes; Gas welding and cutting; Process
and equipment; Arc welding: Power sources and consumables; TIG & MIG processes and their
parameters; Resistance welding: spot, seam projection etc; Other welding processes such as atomic
hydrogen, submerged arc, electro slag, friction welding; Soldering & Brazing; Thermodynamic and
Metallurgical aspects in welding and weld; Shrinkage/residual stress in welds; Distortions & Defects
in welds and remedies; Weld decay in HAZ.

Text Books:
1. Ghosh & Malik, Manufacturing Science, E.W. Press.
2. Boothroyd, Fundamentals of Metal Cutting and Machine Tools, Scripta Book Company
3. Jain R.K., Production Technology, Khanna Publications.

Reference Books:
B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 67
1. H.M.T., Production Technology, Tata McGraw Hill.
2. Pandey P.C., Production Engineering Science, Standard Publishers.
3. Juneja & Shekhon, Fundamentals of Machining & Machine Tools, New Age Publishers Pvt Ltd.
4. Lundeberg., Process & Materials of Manufacturing, Allyn and Bacon.

*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 68

Semester V
Dynamics of Machines
Course Code: EME512
L T P C
3 0 0 3
Objective:
1. To teach students concepts of generalized forces and the Principle of Virtual Work.
2. To teach students concepts of Cam and followers, governors and Gyroscopic motion.
3. To introducing the approaches and mathematical models used dynamical analysis of machinery
Course outcomes: Student would be able to
1. Be proficient in the use of mathematical methods to analyze the forces and motion of complex
systems of linkages, gears and cams.
2. design linkage, cam and gear mechanisms for a given motion or a given input/output motion or
force relationship.
3. analyze the motion and the dynamical forces acting on mechanical systems composed of
linkages, gears and cams.

Course Contents:
Unit I (Lectures 8)
Introduction: Links-types; Kinematics pairs-classification; Constraints-types; Degrees of Freedom;
Grubler’s equation; Linkage mechanisms; Inversions of four bar linkage; Slider crank chain and
double slider crank chain; Velocity in Mechanisms-Velocity of point in mechanism; Relative velocity
method; Instantaneous point in mechanism; Kennedy’s theorem; Instantaneous center method.

Unit II (Lectures 8)
CAMS: Cams and Followers: Classification & terminology; Cam profile by graphical methods for
uniform velocity; Simple harmonic motion and parabolic motion of followers; Analytical cam design:
tangent and circular cams.
Gears: Classification & terminology; Law of gearing; Tooth forms; Interference; Under cutting;
Minimum number of teeth on gear and pinion to avoid interference, Gear trains.

Unit III (Lectures 8)

Force Analysis, Turning Moment & Flywheel: Static force analysis of linkages; Equivalent offset
inertia force; Dynamic analysis of slider crank & Bar mechanism; Piston and Crank effort; Inertia;
Torque; Turning moment diagrams; Fluctuation of energy; Flywheel

Unit IV (Lectures 8)
Governors: Dead weight and spring-loaded governors; Sensitivity; Stability; Hunting; Isochronism;
Effort and Power; Friction and Insensitivity; Introduction to inertia governors.

Unit V (Lectures 8)
Gyroscopic Motion: Principles; Gyroscopic acceleration; Gyroscopic couple and Reaction; Effect of
gyroscopic couple upon the stability of aero planes, ships, two & four-wheelers; Mechanical
Vibration: Single degree free & forced, Un-damped & Damped vibrations; Critical speeds.

Text Books:
1. Bevan Thomas, Theory of Machine, ELBS Publishers
2. Ratan S.S., Theory of Machine, TMH.
Reference Books:
1. Mabie, Mechanisms & Dynamics of Machines.
2. Shiglay, Theory of Machine & Mechanism.
3. Bansal R. K., Theory of Machine, Laxmi Publication.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 69

4. Ambekar A. K., Mechanisms and Machine Theory, Jain Bros.
5. Green W. T., Theory of Machines, Tata McGraw Hill
6. Rao & Dukhipati, Mechanisms and Machine Theory, New Age.
7. Ghosh & Mallik, Theory of Machine & Mechanism, Affiliated East-West Press (P) Ltd
8. Ballaney P. L., Theory of Machines, Khanna Publication.

*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 70

Semester V
Heat & Mass Transfer

Course Code: EME513 L T P C

3 1 0 4
Objective:
1. To introduce a basic study of heat and mass transfer phenomena.
2. To study methodologies for solving a wide variety of practical engineering and industrial
problems.
3. To provide useful information concerning the performance and design of particular systems
deals with heat transfer.
4. A knowledge-based design problem requiring the formulations of solid conduction, fluid
convection and radiation.

Course Outcomes: Students would be able to

1. understand the basic laws of heat transfer.
2. understand heat transfer in thermal engineering systems.
3. analyze problems involving steady state heat conduction in simple geometries.
4. develop solutions for transient heat conduction in simple geometries.
5. understand the fundamentals of convective heat transfer process and evaluate heat transfer
coefficients for natural convection.
6. analyze heat exchanger performance by using the method of log mean temperature difference.
7. analyze heat exchanger performance by using the method of heat exchanger effectiveness.
8. calculate radiation heat transfer between black body and gray body surfaces.

Course Contents:
Unit I (Lectures 08)
Heat Transfer: Mechanisms of heat flow: conduction, convection and radiation; Effect of temperature on
thermal conductivity of materials; Introduction to combined heat transfer mechanism. Conduction: One-
dimensional general differential heat conduction equation in the rectangular, cylindrical and spherical
coordinate systems; Initial and boundary conditions; Steady State one-dimensional heat conduction for
Composite Systems in rectangular, cylindrical and spherical coordinates with and without energy generation;
Thermal resistance concept; Analogy between heat and electricity flow; Thermal contact resistance; Critical
thickness of insulation.

Unit II (Lectures 08)

Fins of Uniform Cross-sectional Area: Types of fin, Heat transfer from fin with different geometries; Fin
efficiency; Fin effectiveness; Applications of the fins.
Transient Conduction: Transient heat conduction; Lumped capacitance method: Time constant; Unsteady
state heat conduction in one dimension only; Heisler charts.

Unit III (Lectures 08)

Forced Convection: Basic concepts; Hydrodynamic boundary layer; Thermal boundary layer; Flow over a flat
plate; Flow across a single cylinder and a sphere; Flow inside ducts; Empirical heat transfer relations; Relation
between fluid friction and heat transfer; Liquid metal heat transfer.
Natural Convection: Physical mechanism of natural convection; Buoyant force; Empirical heat transfer
relations for natural convection over vertical planes and cylinders, horizontal plates.

Unit IV (Lectures 08)

Thermal Radiation: Basic concepts; Radiation properties of surfaces; Laws of black-body radiation; Shape
factor; Black-body radiation exchange; Radiation exchange between diffused non black bodies in an enclosure;
Radiation shields; Solar radiation.

Unit V (Lectures 08)

Heat Exchanger: Types of heat exchangers; Fouling factors; Overall heat transfer coefficient; Logarithmic
mean temperature difference (LMTD) method; Effectiveness-NTU method; Compact heat exchangers.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 71

Condensation and Boiling: Introduction to condensation phenomenon; Heat transfer relations for laminar film
condensation on vertical surfaces and on a horizontal tube; Boiling modes: Pool boiling, curve, forced
convective boiling.
Introduction to Mass Transfer: Introduction; Flick’s law of diffusion; Steady state equi-molar counter
diffusion; Steady state diffusion though a stagnant gas film.

Texts Books:
1. Bayazitouglu & Ozisik, Elements of Heat Transfer, McGraw-Hill Book Company.
2. Holman J.P., Heat Transfer, McGraw-Hill International.
3. Pitts & Sisson, Schaum’s Outline of Heat Transfer, McGraw-Hill International.

Reference Books:
1. Frank Kreith, Principles of Heat Transfer, McGraw-Hill Book co.
2. James R. Welty, Fundamentals of Momentum, Heat and Mass Transfer, John Wiley & Sons
3. Gupta Vijay, Heat Transfer, New Age International (P) Ltd. Publishers
4. Rao Y.V.C., Heat Transfer, University Press.

*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 72

Semester VI
Automobile Engineering

Course Code: EME514 L T P C

3 0 0 3

Objective:
To study about automobiles, working of their components, accessories, gear mechanism,
power transmission.
Course Outcomes: Student would be able to
1. Apply and improve their knowledge in basic sciences for excelling in field of Automobile Engineering
with the emphasis on design, thermal and manufacturing.
2. Describe functioning of Transmission train, conventional and non-conventional drives, Clutches, Gear
boxes, Synchromesh device, Propeller shaft, Differential axle, braking system and Suspension systems.

Course Content:
Unit I (Lectures 8)
Power Unit and Gear Box: Principles of Design of main components; Valve mechanism; Power and
Torque characteristics; Rolling; Air and gradient Resistance; Tractive effort; Gear Box; Gear ratio
determination; Design of Gear box.

Unit II (Lectures 8)
Transmission System: Requirements; Clutches; Torque converters; Over Drive and free wheel;
Universal joint; Differential gear mechanism of rear axle; Automatic transmission; Steering and front
axle; Castor angle, Wheel camber & toe in toe out; Steering geometry; Ackerman mechanism; Under-
steer and over-steer.

Unit III (Lectures 8)

Braking System: General requirements; Road tyre adhesion; Weight transfer; Brakes: Mechanical
brakes, Hydraulic brakes, Vacuum and air brakes; Thermal aspects; Chassis and Suspension System:
Loads on the frame; Strength and stiffness; Various types of suspension systems.

Unit IV (Lectures 8)
Electrical System: Types of starting motors; Generator & regulators; Lighting system; Ignition system;
Horn; Battery; Fuel Supply System: Diesel & Petrol vehicle system such as Fuel Injection Pump;
Injector & Fuel Pump; Carburetor; MPFI.

Unit V (Lectures 8)
Automobile Air-Conditioning: Requirements; Cooling & heating systems, Lubrication System:
Different type of lubrication system, Maintenance system: Preventive maintenance; Break down
maintenance and over hauling system.

Text Books:
1. Hietner, Automotive Engineering, East West Press
2. Singh Kripal, Automobile Engineering, Standard Publishers

Reference Books:
1. Narang, Automobile Engineering, Khanna Publisher
2. Crouse, Automotive Mechanics, Tata McGraw Hill
3. Newton & Steeds, Automobile Engineering, ELBS Publishing
*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 73

Semester V
Database Management System
Course Code: ECS511/611/411/MSC014/BCS311 L T P C
3 1 0 4
Objective: Introducing the fundamental concepts necessary for designing, using, and implementing
database systems and applications. The goal of this course is for students to become well-grounded in
basic concepts necessary for understanding DB and their users, DBMS concepts, architecture , the
concepts of the Entity Relationship(ER) model, the data abstraction and semantic modeling concepts
leading to EER data model, describe the basic relational model, its integrity constraints and update
operations, and the operation of relational algebra, describe relational schema design, and it covers the
normalization and functional dependency algorithm.
Course Outcomes:
1. Be familiar with a commercial relational database system (Oracle) by writing SQL using
the system.
2. Be familiar with the relational database theory, and be able to write relational algebra
expressions for queries.
3. Be familiar with basic database storage structures and access techniques: file and page
organizations, indexing methods including B‐tree, and hashing.
4. Be familiar with the basic issues of transaction processing and concurrency control.

Course Contents:
Unit I: (Lectures 08)
Introduction: Scope and purpose of database system, view of data, relational databases, database
architecture, transaction management, database system Vs filesystem, Database system concept and
architecture, data definitions language, DML.
Data Models: The importance of data models, Basic building blocks, Business rules, The evolution of
data models, Degrees of data abstraction

Unit II: (Lectures 08)

Database design and ER Model: overview, ER-Model, Constraints, ER-Diagrams, ERD Issues, weak
entity etc, Codd’s rules, Relational Schemas, Introduction to UML, Relational database model: Logical
view of data, keys, integrity rules.
Relational Database design: features of good relational database design, atomic domain and
Normalization (1NF, 2NF, 3NF, BCNF)

Unit III: (Lectures 08)

Relational data Model and Language: Relational algebra: introduction, Selection and projection, set
operations, renaming, Joins, Division, syntax, semantics. Operators, grouping and ungrouping,
Relational comparison. Calculus: Tuple relational calculus, Domain relational Calculus, calculus vs
algebra, Computational capabilities, constraints, Views.
Introduction on SQL: Characteristics of SQL, advantage of SQL. SQL data type and literals. Types of
SQL commands. SQL operators and their procedure. Tables, views and indexes. Queries and sub
queries. Aggregate functions. Insert, update and delete operations, Joins, Unions, Intersection, Minus,
Cursors, Triggers, and Procedures in SQL/PL SQL.

Unit IV: (Lectures 08)

Usage of Oracle:
1. Installing oracle
2. Creating Entity-Relationship Diagram using case tools.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 74

3. Writing SQL statements Using ORACLE
4. MYSQL: a) Writing basic SQL SELECT statements.
b) Restricting and sorting data.
c) Displaying data from multiple tables.
d) Aggregating data using group function.
e) Manipulating data.
f) Creating and managing tables.
5. Normalization in ORACLE.
6. Creating cursor in oracle.
7. Creating procedure and functions in oracle.
8. Creating packages and triggers in oracle.

Unit V (Lectures 08)

Transaction management: ACID properties, serializability and concurrency control Lock based
concurrency control (2PL, Deadlocks), Time stamping methods, optimistic methods, database recovery
management.
Text Books:

1. Elmasri, R., Navathe, S., Fundamentals of Database Systems, Addison-Wesley.

2. G. K. Gupta, “Data Base Management”, Tata Mc Graw Hill.
3. Atul Kahate, “Introduction to Database Management Systems” Pearson Education, New Delhi,
2006.

*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 75

Semester V
Production Technology –II (Lab)
Course Code: EME561 L T P C
0 0 3 2
Objective:
1. To understand basic manufacturing processes like machining, drillimg and different welding processes.
2. To study the different cutting tool materials and types & geometry of cutting tools.
3. To learn introductory concepts of milling and gear cutting.

List of Experiments:
Perform 10 experiments out of the following
1. To determine shear-angle and chip thickness ratio for orthogonal cutting on lathe machine.
2. To prepare a bolt (thread) on lathe machine
3. To provide tool angles on tool using Grinding Machine.
4. To perform Gear cutting on milling machine.
5. To Prepare a block of given size on shaper machine.
6. To Obtain a given job on surface grinding machine.
7. To prepare a hole using drilling machine and study of twist of twist drill.
8. To Study different types of tools, its angles and materials.
9. To prepare weld joint using gas welding machine.
10. To prepare weld joint using manual metal arc welding machine.
11. To prepare weld joint using resistance welding machine.
12. To perform soldering & brazing on given work piece
13. To prepare a weld joint using TIG/MIG welding machine.

Evaluation Scheme of Practical Examination:

Evaluation scheme:

PRACTICAL PERFORMANCE & VIVA DURING THE ON THE DAY OF EXAM

SEMESTER (35 MARKS) (15 MARKS) TOTAL
EXPERIMENT FILE WORK VIVA ATTENDANCE EXPERIMENT VIVA INTERNAL
(5 MARKS) (10 MARKS) (10 MARKS) (10 MARKS) (5 MARKS) (10 MARKS) (50 MARKS)

External Evaluation (50 marks)

The external evaluation would also be done by the external Examiner based on the experiment
conducted during the examination.

EXPERIMENT FILE WORK VIVA TOTAL EXTERNAL

(20 MARKS) (10 MARKS) (20 MARKS) (50 MARKS)

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 76

Semester VI
Dynamics of Machines (Lab)
Course Code: EME562
L T P C
0 0 3 2
Objective:
1. Ability to analyze kinematics of the three-dimensional particle motion in various coordinate
systems: cartesian, natural and cylindrical.
2. Understanding of the concepts of power and mechanical efficiency.
3. Ability to analyze particle dynamics.

List of Experiments-
1. To compare practical and theoretical balancing (statically and dynamically) of rotating masses.
2. To determine the controlling force at given speed, sensitiveness at given limits of lift and governor
effort and power.
3. To find the spring tension and follower displace at various angle of cam.
4. To find the applied torque in case of gyroscope couple.
5. To determine the frequency of vibration (oscillation).
6. To determine the natural frequency of vibration in case of two rotor system
7. To identify the amplitude of vibration of beam for different damping
8. To verify for the epicyclical gear train input torque + holding torque = output torque.
9. To find the whirling speed of rotating shafts.
10. To find out the moment of inertia of a given specimen using velocity and acceleration.

Evaluation Scheme of Practical Examination:

Evaluation scheme:

PRACTICAL PERFORMANCE & VIVA DURING THE ON THE DAY OF EXAM

SEMESTER (35 MARKS) (15 MARKS) TOTAL
EXPERIMENT FILE WORK VIVA ATTENDANCE EXPERIMENT VIVA INTERNAL
(5 MARKS) (10 MARKS) (10 MARKS) (10 MARKS) (5 MARKS) (10 MARKS) (50 MARKS)

External Evaluation (50 marks)

The external evaluation would also be done by the external Examiner based on the experiment
conducted during the examination.

EXPERIMENT FILE WORK VIVA TOTAL EXTERNAL

(20 MARKS) (10 MARKS) (20 MARKS) (50 MARKS)

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 77

Semester V
Heat & Mass Transfer (Lab)

Course Code: EME563 L T P C

0 0 3 2
Objective:
1. Apply principles of heat and mass transfer to basic engineering systems
2. Analyse heat transfer by conduction, convection;
3. Analyse and design heat exchangers;
4. To study radiations and shape factor.

List of Experiments-
1. To Study and determine thermal resistance of a composite wall.
2. To determine heat flow rate through the lagged pipe and thermal conductivity of lagging
material.
3. To determine the critical heat flux using critical heat flux apparatus.
4. To determine the variation of heat transfer coefficient over the vertical surface in natural convection.
5. To demonstrate effective thermal conducting of heat pipe.
6. To determine heat flow rate and effectiveness of a fin for steady state of temperature distribution
along the length.
7. To study forced measurement test rig.
8. To determine emissivity of test plate.
9. To ensure the speed of the shaft study speed measurement test rig.
10. To determine the LMTD of parallel and counter flow Heat exchanger.

Evaluation Scheme of Practical Examination:

Evaluation scheme:

PRACTICAL PERFORMANCE & VIVA DURING THE ON THE DAY OF EXAM

SEMESTER (35 MARKS) (15 MARKS) TOTAL
EXPERIMENT FILE WORK VIVA ATTENDANCE EXPERIMENT VIVA INTERNAL
(5 MARKS) (10 MARKS) (10 MARKS) (10 MARKS) (5 MARKS) (10 MARKS) (50 MARKS)

External Evaluation (50 marks)

The external evaluation would also be done by the external Examiner based on the experiment
conducted during the examination.

EXPERIMENT FILE WORK VIVA TOTAL EXTERNAL

(20 MARKS) (10 MARKS) (20 MARKS) (50 MARKS)

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 78

Semester V
DISCIPLINE & GENERAL PROFICIENCY

Course Code: EGP511 C-1

There shall be continuous evaluation of the student on the following broad parameters:

1. Observance of dress code.

Head of Department would be display GP marks on notice board in prescribed format after IInd &
IIIrd CT in semester:

Cultural Events
Coordinator &

Mentor
Coordinator

Director or
Principal
Mentor
Mentor
marks

Head

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 79

Semester VI
Refrigeration & Air Conditioning

Course Code: EME611 L T P C

3 1 0 4

Objective:
1. To study about vapour compression and vapour absorption refrigeration system.
2. To analyze the refrigeration cycles and the methods for improving performance.
3. To design air conditioning system using cooling load calculation.
4. To know the application of refrigeration and air conditioning processes.
Course outcome: Student would be able to gain knowledge about refrigeration and
air conditioning system, analysis and design calculation.

Course Contents:
Unit I (Lectures 8)
Refrigeration: Introduction to refrigeration system; Methods of refrigeration; Carnot refrigeration cycle; Unit
of refrigeration; Refrigeration effect & C.O.P.
Air Refrigeration cycle: Open and closed air refrigeration cycles; Reversed Carnot cycle; Bell Coleman or
Reversed Joule air refrigeration cycle; Aircraft refrigeration system; Classification of aircraft refrigeration
system: Boot strap refrigeration, Regenerative, Reduced ambient; Dry air rated temperature (DART).

Unit II (Lectures 8)
Vapour Compression System: Single stage system; Analysis of vapour compression cycle; Use of T-S and P-
H charts; Effect of change in suction and discharge pressures on C.O.P; Effect of sub cooling of condensate &
superheating of refrigerant vapour on C.O.P of the cycle; Actual vapour compression refrigeration cycle;
Multistage vapour compression system requirement; Removal of flash gas; Inter-cooling; Different
configuration of multistage system; Cascade system.

Unit III (Lectures 8)

Vapour Absorption System: Working principle of vapour absorption refrigeration system; Comparison
between absorption & compression systems; Elementary idea of refrigerant absorbent mixtures; Temperature-
concentration diagram, Enthalpy- concentration diagram; Adiabatic mixing of two streams; Ammonia-water
vapour absorption system; Lithium Bromide water vapour absorption system and its comparison; Refrigerants:
Classification, nomenclature and desirable properties of refrigerants; Common refrigerants; Secondary
refrigerants and CFC free refrigerants.

Unit IV (Lectures 8)
Air-Conditioning: Introduction to air-conditioning; Psychometric properties and their definitions;
Psychometric chart; Different Psychometric processes; Thermal analysis of human body; Effective temperature
and comfort chart; Cooling and heating load calculations; Selection of inside & outside design conditions; Heat
transfer through walls & roofs; Infiltration & ventilation; Internal heat gain; Sensible heat factor (SHF); By pass
factor; Grand Sensible heat factor (GSHF); Dew point apparatus.

Unit V (Lectures 8)
Refrigeration Equipment & Applications: Basic components of refrigeration & air-conditioning equipments;
Air washers; Cooling towers; Humidifying efficiency; Food preservation; Cold storage; Refrigerators; Freezers;
Ice plant; Water coolers; Elementary knowledge of transmission and distribution of air through ducts and fans;
Basic difference between comfort and industrial air-conditioning.

Text Books:
1. Prasad Manohar, Refrigeration and Air Conditioning, New Age International
2. Arora C.P., Refrigeration and Air Conditioning, McGraw Hill
3. Arora & Domkundwar, Refrigeration and Air Conditioning, Tata mcgraw-Hill

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 80

Reference Books:
1. Stoecker & Jones, Refrigeration and Air Conditioning, McGraw-Hill.
2. Roy J. Dossat, Refrigeration and Air Conditioning, John Wiley & Sons.
3. Baloney P.L., Refrigeration and Air Conditioning, Prentice Hall.
4. Kuhen, Ramsey & Thelked, Thermal Environment Engg, Central Publishing House.

*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 81

Semester VI
Mechanical Vibrations
Course Code: EME612 L T P C
3 0 0 3

Objective:
1. To understand the importance of vibrations in mechanical design of machine parts that operates
in vibratory condition.
2. To understand the differential equation of motion of vibratory system.
3. To study free and forced (harmonic, periodic, nonperiodic) vibration analysis of single and
multi-degree of freedom linear system.

Course outcome: Student would be able to

1. appreciate the need and importance of vibration analysis in mechanical design of machine parts
that operate in vibratory conditions.
2. analyze the mathematical model of a linear vibratory system to determine its response.
3. obtain linear mathematical models of real life engineering systems.
4. use Lagrange’s equations for linear and nonlinear vibratory systems.
5. determine vibratory responses of SDOF and MDOF systems to harmonic, periodic and non-
periodic excitation.
6. have an idea on frequency and time response of vibratory systems.

Course Contents:
Unit I (Lectures 08)
Introduction: Periodic motion; Harmonic motion; Superposition of simple harmonic motions; Beats;
Fourier analysis.

Single Degree Freedom System: Free vibration; Natural frequency; Equivalent Systems; Energy
method for determining natural frequency; Response to an initial disturbance; Torsional vibrations;
Damped vibrations; Damping models: Structural, Coulomb and Viscous damping; Vibrations of
system with viscous damping; Logarithmic decrement; Viscous dampers.

Unit II (Lectures 08)

Single-Degree of Freedom: Forced vibration; Harmonic excitation with viscous damping; Steady
state vibrations; Forced vibrations with rotating and reciprocating unbalance; Support excitation;
Vibration isolation; Transmissibility; Vibration measuring instruments: Displacement, Velocity,
Acceleration and Frequency measuring instrument, characteristic curve, Magnification factor.

Unit III (Lectures 08)

Two-Degree Freedom System: Introduction; Principal modes; Double pendulum; Torsional system
with damping; Coupled System; Un-damped dynamic system; Vibration absorbers; Centrifugal
pendulum absorber; Dry friction damper; Un-tuned viscous damper.

Unit IV (Lectures 08)

Multi-degree Freedom System-I: Exact Analysis: Un-damped free and forced vibrations of
multi-degree system; Influence numbers; Reciprocal Theorem; Vibration of geared system; Principal
coordinates; Continuous systems: Longitudinal vibration of bars; Torsional vibrations of Circular
shafts; Lateral vibration of beams.

Unit V (Lectures 08)

Multi-degree Freedom System-II: Critical Speed of Shafts; Shafts with one disc with and without
damping; Multi-disc shafts; Secondary critical speed.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 82

Text Books:
1. Srinivasan P., Mechanical Vibration, TMH
2. Grover G. K., Mechanical Vibration, Jain Bros. Roorkee.
3. Thomson W.T., Mechanical Vibration, Prentice Hall

Reference Books:
1. Tse, Morse & Hinkle, Mechanical Vibration, Theory & Application, Prentice Hall.
2. Rao J. S. & Gupta K., Introduction Course on Theory and Practice of Mech. Vibration, New Age
Publishers.
3. Rama Murthy V., Mechanical Vibration Practice with Basic Theory, Narosa Publishers.
*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 83

Semester VI
Design of Machine Elements

Course Code: EME613

L T P C
3 0 0 3
Objective:
1. To demonstrate how engineering design uses the many principles learned in previous
engineering science courses and to show how these principles are practically applied.
2. To study about design and creation of devices that consist of interrelated components used to
modify force and/or motion.
Course Outcomes: Student would be able to-
1. Define failure of machine element and decide on an appropriate failure model.
2. Design an appropriate machine element based on: permissible load (for given operating
conditions), Required element life, Manufacturing considerations.

Course Contents:
Unit I (Lectures 8)
Introduction: Definition of Design; Design Process; Analysis; Need based developments; Design by evolution;
Technology based developments; Brain-storming. Standards in design & selection of preferred size; Different
stages of creep; BIS system of designation of steels.

Unit II (Lectures 8)
Design for Static and Dynamic loads: Modes of failure; Factor of safety; Stress-strain relationship; Principal
stresses; Theories of failure; Design against fluctuating load; Stress concentration; Stress concentration factors;
Fluctuating/alternating stresses, Fatigue failure; Endurance limit; Design for finite & infinite life; Soderberg &
Goodman criteria.

Unit III (Lectures 8)

Joints: Welded joints, Screwed joints, Eccentric loading of welded and screwed joints; Design for fatigue
loading; Design of riveted joints.

Unit IV (Lectures 8)
Design of Shaft and keys. Selection of square & flat keys &splines; Design against static and fatigue loads;
Strength & rigidity design; Design of Rigid & flexible couplings. Design of sliding contact bearings, Journal
bearing, foot step bearing.

Unit V (Lectures 8)
Gears: Gear nomenclature; Tooth profiles; Systems of gear teeth; Gear materials; Design of Structure; Spur gear;
Design consideration.
Mechanical springs: Design of Helical and leaf springs against static & fatigue loading; Design Analysis of
Power Screws; Form of threads: Square threads, trapezoidal threads; Stresses in a screw; Design of screw jack.

Text Books:
1. Bhandari, Design of Machine Elements, TMH
2. Sharma &Agarwal, Machine Design, Kataria
3. Maleev & Hartman, Machine Design, C.B.S. Publishers
4. Sharif Abdulla, Design Data Book, Dhanpat Rai & Sons

Reference Books:
1. Shigley, Machine Design, Mcgraw Hill
2. Black & Adams, Machine Design, Mcgraw Hill.
3. Spotts, Design of Machine Elements, Prentice Hall of India Pvt. Ltd

*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 84

Semester VI
Non-Conventional Energy Resources
Course Code: EEE614/EEE712 L T PC
3 1 04

Objective: To make the students aware about the types of turbines & site selection for installation of
various types of power plants.
Course Outcomes:
 Understand the different non-conventional sources and the power generation techniques to
generate electrical energy,
 Design a prescribed engineering sub-system
 Recognize the need and ability to engage in lifelong learning for further developments in this
field.
Course Contents:
Unit I (Lectures 08)
Introduction: World energy use; Reserves of energy resources; Energy cycle of the earth;
Environmental aspects of energy utilization; Renewable energy resources and their importance.
Unit II (Lectures 08)
Solar Energy: Introduction; Extra-terrestrial solar radiation; Radiation at ground level; Collectors; Solar
cells; Applications of solar energy. Biomass Energy: Introduction; Biomass Conversion; Biogas
Production; Ethanol Production; Pyrolysis and Gasification; Direct Combustion; Applications.
Unit III (Lectures 08)
Wind, Geo-Thermal and Hydro Energy Sources: Introduction; Basic theory; Types of turbines;
Geothermal Energy Resources; Resource based applications for heating and electricity generation;
Hydropower basic concepts; Site selection; Types of turbines; Small scale hydropower.
Unit IV (Lectures 08)
Tidal Energy: Introduction; Origin of tides; Power generation schemes; Basic theory of Wave energy;
Wave power Devices; Open and Closed OTEC cycles.
Unit V (Lectures 08)
Other Renewable Energy Sources: Ocean Currents; Salinity Gradient Devices; Environmental Aspects;
Potential impacts of harnessing the different renewable energy resources.
Text Books:
1. G D Rai, Non-Conventional Energy Sources, Khanna publishers
Reference Books:
1. A. Duffie and W. A. Beckmann, “Solar Engineering of Thermal Processes”, John Wiley
2. F. Kreith and J. F. Kreider, “Principles of Solar Engineering”, McGraw-Hill
3. T. N. Veziroglu, “Alternative Energy Sources”, McGraw-Hill.

*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 85

Semester VI
Operations Management
Course Code: EHM611 L T P C
3 0 0 3
Objective:
To learn various concepts of operations management like Aggregate planning, scheduling
forecasting, layout planning etc.
Course Outcomes: student would be able to
1. apply knowledge of business concepts and functions in an integrated manner.
2. use specialized knowledge in Operations Management to solve business processes.
3. apply knowledge of fundamental concepts of operations management.
4. apply knowledge of approaches to operational performance improvement.

Course Contents
Unit I (Lectures 8)
Operations Management: Overview; Definition of production and operations management; Transformation
process model: Inputs, Process and outputs; Classification of operations; Responsibilities of Operations
Manager; New Product Development; Product Design; Process types in manufacturing: Project; Jobbing,
Batch, Line, Mass, Continuous; Process types in services: Professional services, Services shops, Mass services.

Unit II (Lectures 8)
Forecasting Methods & Aggregate Planning: Forecasting as a planning tool; Time horizon in forecasting;
Characteristics of forecasts; Subjective and objective forecasting methods: Casual methods; time series methods,
methods for forecasting stationery series; exponential smoothing, Measurement of Errors; Monitoring and
Controlling forecasting models.
The aggregate planning problem; Aggregate planning techniques; Evaluation of chase strategy & constant work
force plan; Solution of aggregate problem.

Unit III (Lectures 8)

Inventory Control & MRP: Inventory Management: Objectives, Factors, Process, Relevant costs; The EOQ
model; Selective Inventory control techniques: ABC, VED, SED, FSN analysis; MRP: Overview; Process; Use
of MRP in real world.

Unit IV (Lectures 8)
Operation Scheduling: Characteristics of job shop scheduling problems; Theory of sequencing for single
machine sequencing rules: FCFS, SPT, EDD, critical ratio, Minimum number of tardy jobs (NT).

Unit V (Lectures 8)
Facility Location & Layout: Factors affecting location decisions; Techniques for locating new facilities;
Subjective, Semi quantitative & quantitative techniques; Centre of gravity problem; Facility layout principles;
Systematic layout planning procedure; Types of layout; Activity relationship chart; From/to chart; Line
balancing.

Text Books:
1. Adam Jr & Everett E. R J, Production and Operations Management, Prentice-Hall.
2. Ashwathappa K. & Bhatt K, Production & Operations Management, Himalaya Publication.
3. Mahadevan B., Operations Management- Theory and Practice, Pearson Education.
4. Richard B Chase, Operations Management, Tata McGraw Hill.

Reference Books:
1. Kachru Upendra, Production and Operations Management, Text and Cases, Excel Books.
2. Gaither Norman & Greg Fraizer, Operations Management, Thomson South Western.
3. Chary S. N., Production and Operations Management, Tata McGraw-Hill.

*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 86

Semester VI
English Communication and Soft Skills – IV
[EHM699/EHM599/BHM499 amended vide approval dt. July 23, 2018 of V.C]

Course Code: EHM699/599/BHM499 L T P C

1 1 2 2
Objectives:
1. To enable the learners to inculcate the skills of technical writing.
2. To enable the learners to proactively participate in Job Oriented activities.
3. To enable the learners to be aware of corporate Skills.
Course Outcomes: At the end of the semester, the learners will be able to
1. Formulate their CVs along with cover letter in Job oriented perspective.
2. Communicate technically in functional context.
3. Proactively participate in Job Oriented activities. (Like Interview, GD etc.)
4. Aware of the skills required in corporate world.

Course Contents:
Unit – I: Job Oriented Skills (10 Hours)
 Cover Letter
 Preparing Resume and Curriculum-Vitae
 Writing Joining Report

Unit – II: Technical Communication (12 Hours)

 Technical description of engineering objects
 Data Interpretation: Tables, Charts, & Graphs
 Preparing Agenda & Minutes of the Meeting
 Technical Proposal: Types, Significance, Structure & AIDA
 Report Writing: Types, Structure& Steps towards Report writing

Unit- III: Interview Skills (10 Hours)

 Branding yourself
 Interview: Types of Interview, Tips for preparing for Interview and Mock Interview
 Group Discussion: Do’s and Don’ts of Group Discussion
 Negotiation skills

Unit – IV: Corporate Skills (8 Hours)

 Corporate Expectation
 Service mindset: Selling a product - Ad made shows
 Goal setting
 Team Building & Leadership
 Professional Ethics

Reference Books:
 Raman Meenakshi & Sharma Sangeeta, “Technical Communication-Principles & Practice” Oxford
University Press, New Delhi.
 Mohan K. & Sharma R.C., “Business Correspondence of Report Writing”, TMH, New Delhi.
 Chaudhary, Sarla “Basic Concept of Professional Communication” Dhanpat Rai Publication, New Delhi.
 Kumar Sanjay & Pushplata “Communication Skills” Oxford University Press, New Delhi.
 Agrawal, Malti “Professional Communication” Krishana Prakashan Media (P) Ltd. Meerut.
Methodology:
1. The content will be conveyed through Real life situations, Pair Conversation, Group Talk and Class
Discussion.
2. Conversational Practice will be effectively carried out by Face to Face & Via Media (Audio-Video Clips)
3. Modern Teaching tools (PPT Presentation & Motivational videos with sub-titles) will be utilized.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 87

Note:
 For effective communication practice, groups will be changed weekly.
 Class (above 30 students) will be divided in to two groups for effective teaching.

Evaluation Scheme
Internal Evaluation External Evaluation Total Marks
50 Marks 50 Marks
40 Marks
25 Marks
(Progressive Evaluation) 25 Marks
10 Marks Midway external
After each unit-completion: (External Viva)* *
(Attendance) assessment 100
Assignments /Oral Presentation
(Viva) *

Note: 1. Midway external assessment of 25 marks will be submitted and considered with external evaluation with
a total of 50 marks.
2. Assignments & Oral Presentation (Progressive Evaluation) will be designed to test learning outcomes unit
wise.
*Parameters of Midway external assessment (Viva)

Knowledge of Body Communication Confidence Voice TOTAL

frequently Language skills Modulation
asked
questions
05 Marks 05 Marks 05 Marks 05 Marks 05 Marks 25 Marks
Note: To take corrective actions, midway assessment will be conducted by 2-member committee of Director’s
nominee (not by the faculty teaching English courses) and average of the two would be the 25 marks obtained by
the students after two units are completed.

**Parameters of External Viva

Knowledge of Body Communication Confidence Voice
frequently Language skills Modulation TOTAL
asked
questions
05 Marks 05 Marks 05 Marks 05 Marks 05 Marks 25 Marks
Note: External Viva will be conducted by 3-member committee comprising
a) Faculty teaching the class
b) English faculty from other college of the University (As approved by VC).
c) T&P officer of other colleges of the University (As approved by VC).
Each member will evaluate on a scale of 25 marks and the average of three would be the 25 marks obtained by
the students.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 88

Semester VI
Refrigeration & Air Conditioning (Lab)

Course Code: EME661 L T P C

0 0 3 2
Objective:
1. To study about different types of refrigerators, different types of expansion devices.
2. To study about volumetric efficiency of compressor used in refrigerator.
3. To study about air washer etc.

List of Experiments:
1. To study & determination of volumetric efficiency of Reciprocating compressor.
2. To study & determination of volumetric efficiency of Semi Sealed compressor.
3. To study & determination of volumetric efficiency of Open type compressor.
4. To determine refrigeration effect using the different diameters expansion devices used in
refrigeration system.
5. To study and determination of cooling effect using window air conditioner
6. To determine the COP of vapour compression refrigeration system.
7. To Study Air Washer.
8. To identify different parts of evaporators (Forst Free) used in refrigeration
systems.
9. To determine COP of see through freeze (Direct cooled).
10. To identify different parts of automobile AC test rig.

Evaluation Scheme of Practical Examination:

Internal Evaluation (50 marks)

Evaluation scheme:

PRACTICAL PERFORMANCE & VIVA DURING THE ON THE DAY OF EXAM

SEMESTER (35 MARKS) (15 MARKS) TOTAL
EXPERIMENT FILE WORK VIVA ATTENDANCE EXPERIMENT VIVA INTERNAL
(5 MARKS) (10 MARKS) (10 MARKS) (10 MARKS) (5 MARKS) (10 MARKS) (50 MARKS)

External Evaluation (50 marks)

The external evaluation would also be done by the external Examiner based on the experiment
conducted during the examination.

EXPERIMENT FILE WORK VIVA TOTAL EXTERNAL

(20 MARKS) (10 MARKS) (20 MARKS) (50 MARKS)

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 89

Semester VI
Solid Works Lab
Course Code: EME662
L T P C
0 0 3 2
Objective:
To make the students aware of 3D modeling of machine components using CAD software.

List of Experiments:
1. Introduction to modeling software and detail discussion & familiarization about SOLIDWORKS.
2. Practice sketch Tools and Relations with in stipulated duration.
3. Practice sketcher tool, relation and dimensioning and prepare Bracket Drawing with
SOLIDWORKS sketcher.
4. To prepare coupling shaft using revolve command.
5. To create a machine component from the views using extrude, fillet & instant 3D.
6. To prepare the detail model of Wing Nut, Snap Head Rivet, Grub Screw & Set Screw.
7. To prepare the assembly of given experiment no. 6.
8. File Management- New, Open, Save, Save As, Page Setup, Printing, Import and Export.
9. Introduction of kinematics using SOLIDWORKS MOTION.
10. Introduction of joints using SOLIDWORKS MOTION.

Evaluation Scheme of Practical Examination:

Internal Evaluation (50 marks)

Evaluation scheme:

PRACTICAL PERFORMANCE & VIVA DURING THE ON THE DAY OF EXAM

SEMESTER (35 MARKS) (15 MARKS) TOTAL
EXPERIMENT FILE WORK VIVA ATTENDANCE EXPERIMENT VIVA INTERNAL
(5 MARKS) (10 MARKS) (10 MARKS) (10 MARKS) (5 MARKS) (10 MARKS) (50 MARKS)

External Evaluation (50 marks)

The external evaluation would also be done by the external Examiner based on the experiment
conducted during the examination.

EXPERIMENT FILE WORK VIVA TOTAL EXTERNAL

(20 MARKS) (10 MARKS) (20 MARKS) (50 MARKS)

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 90

Semester VI
DISCIPLINE & GENERAL PROFICIENCY

Course Code: EGP611 C-1

There shall be continuous evaluation of the student on the following broad parameters:

1. Observance of dress code.

Head of Department would be display GP marks on notice board in prescribed format after IInd &
IIIrd CT in semester:

Cultural Events
Coordinator &

Mentor
Coordinator

Director or
Principal
Mentor
Mentor
marks

Head

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 91

Semester VII
Computer Aided Design (CAD)
L T P C
Course Code: EME711 3 0 0 3

Objective:
1. This course provides an introduction into engineering design and communication through the
use of computer aided design (CAD) software.
2. The principles and methods of engineering design are introduced, and the critical role of
graphic communication within the design process is described.
3. The use of CAD software to generate computer models and technical drawings.

Course Outcomes: Student would be able to

1. Integrate the role of graphic communication in the engineering design process.
2. Generate and interpret engineering technical drawings of parts and assemblies according to
engineering design standards.
3. Use CAD software to generate a computer model and technical drawing for a simple, well-
defined part or assembly.

Course Contents:
Unit-I (Lectures 8)
Introduction: Introduction to CAD/CAE; Element of CAD, Essential requirements of CAD, Concepts of
integrated CAD/CAM; Importance of CAD& their necessity; CAD Engineering applications, Computer aided
Inspection (CAI), Computer aided Testing (CAT), Co-ordinate measuring machine (CMM), Machine Vision,
3D-printing.

Unit-II (Lectures 8)
Computer Graphics: Graphics input devices, Graphics display devices, Graphics standards, Graphics
Software, Software Configuration, Graphics Functions, Output primitives- Bresenham’s line drawing algorithm
and Bresenham’s and mid-point circle generating algorithm
Geometric Transformations: World/device Coordinate Representation, Windowing and clipping, 2-D
Geometric transformations- Translation, Scaling, Shearing, Rotation & Reflection, Matrix representation,
Composite transformation, 3-D transformations.

Unit-III (Lectures 8)
Curves: Curves representation, Interpolation vs approximation, Properties of curve design, Parametric
representation curves, Parametric continuity conditions, Synthetic curves-Hermite cubic splines-Blending
function formulation and its properties, Bezier curves-Blending function formulation and its properties,
Composite Bezier curves, B-spline curves and its properties.

Unit-IV (Lectures 8)
3D Graphics: Polygon Surfaces-Polygon mesh representations, Quadric and Super-quadric surfaces, Blobby
objects; Fractals, Solid modeling- Regularized set operations; Boundary representation (B-rep), Constructive
solid geometry (CSG), Sweep representation, Color models. Basic commands for 2-D drafting software like
AutoCAD and 3-D solid modeling software PTC Creo and Solidworks.

Unit-V (Lectures 8)
Finite Element Methods: Introduction, Basic concept of the finite element method (FEM), Stages in finite
element analysis, Shape functions, Development of elemental stiffness matrix and their assembly, Finite
Element analysis of 1-D problems like spring, bar, truss and beam elements formulation with elimination and
penalty approaches, 1-D thermal and fluid problems.

Text Books-
1. Hearn D. & Baker M. P., Computer Graphics, Prentice Hall
2. Srivastava. R.K., Computer Aided Design, Umesh Publication

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 92

Reference Books-
1. Foley D., Van Dam A., Feiner S. K., Computer Graphics: Principles and Practice in C, Pearson
Education.
2. Zeid Ibrahim, CAD/CAM theory and practice, McGraw Hill International.
3. Dukkipati R. V., Rao M. A., Bhat R. Computer Aided Analysis & Design of Machine Elements,
New Age International.
4. Rogers D. F. Adams J. A., Mathematical Elements for Computer Graphics, McGraw Hill.
5. Groover M. P.& Zimmers E. W., CAD/CAM: computer-aided design and manufacturing, Prentice
Hall of India Pvt Ltd.
6. S.S. Bhavikatti, Finite Element Analysis, New Age International Publishers.
7. Krishnamoorthy, FE Analysis Theory and Programming, Tata McGraw Hill.

*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 93

Semester VII
IC Engines
Course Code: EME712
L T P C
3 0 0 3
Objective:
1. introduction to reciprocating internal combustion engines with emphasis on mobile and
stationary applications.
2. Understand the fundamentals of combustion such as flame stoichiometry, and flame speed and
how combustion is coupled to engine performance.
3. Understand how the major pollutants of internal combustion engines are formed and
controlled.
Course Outcomes: Student would be able to
1. Describe and analyse the power cycle of internal combustion engines using ideal gas cycles, air
cycles, and fuel-air cycles.
2. Compute indicated power and thermal efficiency.
3. Describe methods for reduction of exhaust emissions, and their relations to fuel quality and
engine performance and explain engine friction, wear and lubrication and cooling system.

Course Contents:
Unit I (Lectures 8)
Introduction to I.C Engines: Engine classification; Air standard cycles; Otto, Diesel, Stirling, Ericsson cycles;
Actual cycle analysis; Two and four stroke engines; SI and CI engines; Valve timing diagram; Rotary engines;
Stratified charge engine.
Fuels: Fuels for SI and CI engine; Important qualities of SI engine fuels; Rating of SI engine fuels; Important
qualities of CI engine fuels, Dopes, Additives; Gaseous fuels; Alternative fuels for IC engines: LPG, CNG,
Biogas, Producer gas.

Unit II (Lectures 8)
SI Engines: Carburetion; Mixture requirement, Carburettor type; Theory of Carburetttor; MPFI Combustion in
SI engine; Flame speed; Ignition delay; Abnormal combustion and its control.
Combustion chamber design for SI engines; Ignition system requirement; Magneto and battery ignition system;
Ignition timing and spark plug; Electronic ignition system.

Unit III (Lectures 8)

CI Engine: Fuel injection in CI engines; Types of injection systems; Fuel pumps; Fuel injectors; Injection
timings; Combustion in CI engines; Ignition delay; Knock and its control; Combustion chamber design of CI
engines; Scavenging in 2 Stroke engines; Pollution and its control.

Unit IV (Lectures 8)
Engine Cooling: Different cooling systems; Radiators and cooling fans; Lubrication: Engine
friction; Lubrication principal; Type of lubrication; Lubrication oils; Crankcase ventilation;
Supercharging: Types of supercharging; Effect of altitude on power output; Testing and performance
measurement of SI and CI engines.

Unit V (Lecture 8)
Compressors: Classification; Reciprocating compressors: Single and multi-stage; Inter cooling; volumetric
efficiency; Rotary compressors: Centrifugal compressor; Elementary theory; Vector diagram; Efficiencies;
Elementary analysis of axial compressors; Surging and stalling; Roots blower; Waned compressor;
Performance analysis.

Text Books:
1. Obert E.F., I.C Engine Analysis & Practice, Tata Mc Graw Hill Publishers
2. Ganeshan, I.C Engine, Tata Mc Graw Hill Publishers.
3. Mathur & Sharma, A Course in International Combustion Engines, Dhanpat Rai & Sons.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 94

Reference Books:
1. Chlumsky, Reciprocating and Rotary Compressors, SNTI Publications Czechoslovakia.
2. Yadav R., I.C Engine, Central Publishing House, Allahabad

*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 95

Semester VII
Power Plant Engineering
Course Code: EME713 L T P C
3 1 0 4
Objective:
1. To Study about power plants like nuclear, hydroelectric, steam, diesel etc.
2. To introduce students with both steam generation and electricity production and to familiar with the
engineering calculations encountered in practice problems.
Course Outcomes: Student would be able to
1. analyze different types of steam cycles and estimate efficiencies in a steam power plant.
2. Describe basic working principles of gas turbine and diesel engine power plants.
3. Define the performance characteristics and components of such power plants.
4. List the principal components and types of nuclear reactors.
5. Evaluate cycle efficiency and performance of a gas cooled reactor power plant.
6. Classify different types of coupled vapor cycles and list the advantages of combined cycles power plant

Course Content:
Unit I (Lectures 8)
Introduction: Power and energy; Sources of energy; Review of thermodynamic cycles related to power plants;
Fuels and combustion; Calculations; Variable Load Problem: Industrial production and power generation
compared; Ideal and realized load curves; Terms and factors; Effect of variable load on power plant operation;
Methods of meeting the variable load problem; Power Plant Economics and Selection: Effect of plant type on
costs, rates, fixed elements, energy elements, Depreciation and replacement; Theory of rates; Economics of
plant selection; Other considerations in plant selection.
Unit II (Lectures 8)
Steam Power Plant: Power plant boilers including critical and super critical boilers; Fluidized bed boilers;
Boilers mountings and accessories; General layout of steam power plant; Different systems such as fuel
handling system, pulverisers and coal burners, combustion system, Draft, Ash handling system, Feed water
treatment and condenser and cooling system; Turbine auxiliary systems such as governing, Feed heating,
reheating ,Operation and maintenance of steam power plant; Heat balance and efficiency.
Unit III (Lectures 8)
Diesel Power Plant: General layout; Performance of diesel engine; Fuel system; Lubrication system; Air intake
and admission system; Supercharging system; Exhaust system; Diesel plant operation and efficiency; Heat
balance.
Gas Turbine Power Plant: Elements of gas turbine power plants; Gas turbine fuels; Cogeneration; Auxiliary
systems such as fuel, controls and lubrication; Operation and maintenance; Combined cycle power plants.
Unit IV (Lectures 8)
Nuclear Power Plant: Principles of nuclear energy; Basic components of nuclear reactions; Nuclear power
station; Hydro Electric Station: Principles of working; Applications; Site selection; Classification and
arrangements; Hydro- electric plants; Run off size of plant and choice of units; Operation and maintenance;
Hydro systems; Inter connected systems; Non-Conventional Power Plants: Non-conventional power plants
(Solar, wind, geothermal, tidal).

Unit V (Lecture 8)
Electrical System: Generators and generator cooling; Transformer and their cooling; Bus bar Instrumentation:
Classification; Selection and application; Recorders and their use; Listing of various control rooms. Pollution:
Pollution due to power generation.

Text Books:
1. Verma Mahesh, Power Plant Engineering, Metropolitan Book Company Pvt. Ltd. New Delhi.
2. El-Vakil, Power Plant Technology, McGraw Hill.
Reference Books:
1. Nag, P.K., Power Plant Engineering, Tata McGraw Hill.
2. Yadav R., Steam & Gas Turbines & Power Plant Engineering, Central Publishers.
*Latest editions of all the suggested books are recommended.
B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 96
Semester VII
Hydraulic Machines
Course Code: EME714
L T P C
3 1 0 4
Objective:
1. Describe the operating characteristics of hydraulic machinery (pumps and turbines), and the
factors affecting their operation and specifications, as well as their operation in a system.
2. To gain knowledge about hydraulic machine.

Course Outcomes: Student would be able to solve practical problems. Competencies developed by
this course would therefore be useful for students while performing his/her job in the field of Water
resources / Irrigation/PHE and Environmental Engineering.

Course Contents:
Unit I (Lectures 8)
Impact of Jet: Impulse momentum equation; Force generation due to impact of jet; Impact of jet on fixed flat
plate (vertical, inclined); Impact of jet on moving flat plates (vertical, inclined); Impact of jet on curved fixed
and moving vanes.

Unit II (Lectures 8)
Water Turbines: Layout of hydroelectric power plant; Features of Hydroelectric power plant; Classification
and selection of hydraulic turbines on the basis of head and discharge available; Construction and working
principle of Impulse and Reaction turbines (Pelton wheel, Francis and Kaplan turbine); Velocity diagrams, work
done, efficiencies and its calculation.

Unit III (Lectures 8)

Centrifugal Pump: Construction; Principle of working and applications; Types of casings and impellers;
Manometric head; Velocity diagram; Work done; Manometric efficiency; Mechanical efficiency; Overall
efficiency; Discharge of centrifugal pump; NPSH; Performance characteristics of centrifugal pumps; Concept of
multistage of centrifugal pump; Priming and cavitation.

Unit IV (Lectures 8)
Reciprocating Pump: Construction, working principle and applications of single and double acting
reciprocating pumps; Concept of Slip; Negative slip; Use of Air Vessel; Indicator diagram with effect of
acceleration head & frictional head (no derivations); Discharge of reciprocating pump; Power required to drive
a reciprocating pump; Separation and maximum speed of operation

Unit V (Lectures 8)
Pumping and Hydraulic Devices: Construction and working of following of air lift pump, jet pump, rotary
pumps, external gear pump, internal gear pump, lobe pump, vane pump, hydraulic press, hydraulic accumulator,
hydraulic intensifier.

Text Books:
1. Bansal R.K., Fluid Mechanics and hydraulic machines, Laxmi Publications
2. Lal Jagadish, Fluid Machinery, Metropolitan Book Co. Pvt Ltd

Reference Books:
1. Modi P.N. & Seth, Fluid Mechanics and hydraulic machines, Standard Book House

*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 97

Semester VII
Computer Aided Design (Lab)
Course Code: EME 761 L T P C
0 0 3 2

Objective:
To learn computer aided design and apply these technique for some practical problems.

List of Experiments:
1. Introduction to Drafting/Modeling/Analysis/Management. Example- Creo, Solidworks, ANSYS,
MSP/PPM
2. To prepare the given sketch using Creo Sketcher.
3. To prepare Bracket using Creo Sketcher.
4. To prepare the given machine component using Creo.
5. To prepare the Flange and Drum using Creo Sketcher.
6. To prepare elbow and suspension component using Creo Sketcher.
7. To prepare the connecting rod and piston assembly using Creo.
8. To prepare the component of Plummer Block and Assembly using Creo.
9. Finite Element Methods: Introduction, principle of FEM, types of element-Introduction to FEM - 1D,
2D and 3D elements - shape functions - preprocessing - boundary conditions, structured.
(ANSYS)
10. Exercises on finite element analysis- free mesh generation - analysis - linear and nonlinear analysis -
static and dynamic analysis, post processing- setup, solution and result. (ANSYS)

Evaluation Scheme of Practical Examination:

Internal Evaluation (50 marks)

Each experiment would be evaluated by the faculty concerned on the date of the experiment on a 4-point
scale which would include the practical conducted by the students and a Viva taken by the faculty
concerned. The marks shall be entered on the index sheet of the practical file.

Evaluation scheme:

PRACTICAL PERFORMANCE & VIVA DURING THE ON THE DAY OF EXAM

SEMESTER (35 MARKS) (15 MARKS) TOTAL
EXPERIMENT FILE WORK VIVA ATTENDANCE EXPERIMENT VIVA INTERNAL
(5 MARKS) (10 MARKS) (10 MARKS) (10 MARKS) (5 MARKS) (10 MARKS) (50 MARKS)

External Evaluation (50 marks)

The external evaluation would also be done by the external Examiner based on the experiment conducted
during the examination.

EXPERIMENT FILE WORK VIVA TOTAL EXTERNAL

(20 MARKS) (10 MARKS) (20 MARKS) (50 MARKS)

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 98

Semester VII
IC Engines (Lab)

Course Code: EME762 L T P C

0 0 3 2
Objective:
1. Illustrate the thermodynamic study of various air-breathing engines.
2. To study energy balance for 2 and 4 stroke IC engines.

List of Experiment:
1. To identify the different part of a 2-stroke petrol engine
2. To identify the different part of a 4-stroke diesel engine
3. To measure the fuel consumption in four stroke petrol engines.
4. To measure the fuel consumption in four stroke diesel engines.
5. To determine the brake thermal efficiency of 4 stroke petrol engine
6. To do tuning and servicing of carburetor.
7. To determine the indicated power of multi cylinder 4 stroke petrol engine
8. To compare features of common small cars (such as fiat, Maruti, Centro and Indica)
9. To analyze fuel saving by application of MPFI system.
10. To analyze the power transmission of a car.
11. Industrial visit to automobile industry.

Evaluation Scheme of Practical Examination:

Internal Evaluation (50 marks)

Each experiment would be evaluated by the faculty concerned on the date of the experiment on a
4-point scale which would include the practical conducted by the students and a Viva taken by the
faculty concerned. The marks shall be entered on the index sheet of the practical file.

Evaluation scheme:

PRACTICAL PERFORMANCE & VIVA DURING THE ON THE DAY OF EXAM

SEMESTER (35 MARKS) (15 MARKS) TOTAL
EXPERIMENT FILE WORK VIVA ATTENDANCE EXPERIMENT VIVA INTERNAL
(5 MARKS) (10 MARKS) (10 MARKS) (10 MARKS) (5 MARKS) (10 MARKS) (50 MARKS)

External Evaluation (50 marks)

The external evaluation would also be done by the external Examiner based on the experiment
conducted during the examination.

EXPERIMENT FILE WORK VIVA TOTAL EXTERNAL

(20 MARKS) (10 MARKS) (20 MARKS) (50 MARKS)

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 99

Semester VII
Industrial Training & Presentation (6 Weeks)

Course Code: EME792

L T P C
0 0 0 4
Students will have to undergo industrial training of six weeks in any industry or reputed organization
after the VI semester examination in summer. The evaluation of this training shall be included in the
VII semester evaluation.

The student will be assigned a faculty guide who would be the supervisor of the student. The faculty
would be identified before the end of the VI semester and shall be the nodal officer for coordination of
the training.

Students will prepare an exhaustive technical report of the training during the VII semester which will
be duly signed by the officer under whom training was undertaken in the industry/ organization. The
covering format shall be signed by the concerned office in-charge of the training in the industry. The
officer-in-charge of the trainee would also give his rating of the student in the standard University
format in a sealed envelope to the Director/Principal of the college.

The student at the end of the VII semester will present his report about the training before a committee
constituted by the Director/Principal of the College which would comprise of at least three members
comprising of the Department Coordinator, Class Coordinator and a nominee of the Director/Principal.
The students guide would be a special invitee to the presentation. The seminar session shall be an open
house session. The internal marks would be the average of the marks given by each member of the
committee separately in a sealed envelope to the Director/Principal.

The marks by the external examiner would be based on the report submitted by the student which shall
be evaluated by the external examiner and cross examination done of the student concerned.

Not more than three students would form a group for such industrial training/ project submission.

The marking shall be as follows.

Internal: 50 marks
By the Faculty Guide – 25 marks.
By Committee appointed by the Director/Principal – 25 marks.

External: 50 marks
By Officer-in-charge trainee in industry – 25 marks.
By External examiner appointed by the University – 25 marks.

Technical report will consist five chapter as per given format:

Chapter 1: Brief about organization
Chapter 2: Detail of business carried out by organization
Chapter 3: Specific contribution during the industrial training (not more than 500 words)
Chapter 4: Learning during the industrial training (not more than 200 words)
Chapter 5: Conclusion

Plagiarism will check of technical report in chapter 3, 4 & 5 only.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 100
Semester VII
Project Work Phase-I
Course Code: EME798 L T PC
0 0 8 4

A group of students, not more than three, will be assigned a faculty guide who would be the supervisor
of the group. The faculty would be identified in the starting of the VII semester.

The group will carry out the literature search and collect required material for carrying out the project.

The group will prepare a report not exceeding 15 pages at the end of semester.

The assessment of performance of students should be made at least twice in each semester i.e. VII and
VIII. In this semester, the student shall present the progress of project live as also using overheads
project (30% Project completion) or power point presentation on LCD to the internal committee.

The evaluation committee shall consist of faculty members constituted by the college which would
comprise of at-least three members comprising of the Department Coordinator, Class Coordinator and
a nominee of the Director/Principal. The students guide would be a special invitee to the presentation.
The seminar session shall be an open house session. The internal marks would be the average of the
marks given by each member of the committee separately in a sealed envelope to the
Director/Principal.

The marking shall be as follows.

Internal: 100 marks

By the Faculty Guide - 50 marks
By Committee appointed by the Director/Principal – 50 marks

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 101
Semester VII
DISCIPLINE & GENERAL PROFICIENCY

Course Code: EGP711 C-1

There shall be continuous evaluation of the student on the following broad parameters:

1. Observance of dress code.

Head of Department would be display GP marks on notice board in prescribed format after IInd &
IIIrd CT in semester:

Cultural Events
Coordinator &

Mentor
Coordinator

Director or
Principal
Mentor
Mentor
marks

Head

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 102
Semester VII
Open Elective-I

Course: Principle of Management

Course Code: FOE011 LT P C
3 1 0 4
Objective:
To enable the students to study the evolution of Management, to study the functions and principles of
management and to learn the applications of principles in an organization.
Course Outcome:
Upon completion of the course, the student will be able to have clear understanding of managerial
functions like planning, organizing, staffing, leading & controlling and have some basic knowledge on
international aspect of management.
Course Contents:

Unit I: Introduction To Management And Organizations (Lectures 08)

Definition of Management – Science or Art – Manager Vs Entrepreneur - types of managers -
managerial roles and skills – Evolution of Management – Scientific, human relations , system and
contingency approaches – Types of Business organization - Sole proprietorship, partnership, company-
public and private sector enterprises - Organization culture and Environment – Current trends and
issues in Management.

Unit II: Planning (Lectures 08)

Nature and purpose of planning – planning process – types of planning – objectives – setting
objectives – policies – Planning premises – Strategic Management – Planning Tools and Techniques –
Decision making steps and process.

Unit III: Organising (Lectures 08)

Nature and purpose – Formal and informal organization – organization chart – organization structure –
types – Line and staff authority – departmentalization – delegation of authority – centralization and
decentralization – Job Design - Human Resource Management – HR Planning, Recruitment, selection,
Training and Development, Performance Management , Career planning and management.

Unit IV: Directing (Lectures 08)

Foundations of individual and group behaviour – motivation – motivation theories – motivational
techniques – job satisfaction – job enrichment – leadership – types and theories of leadership –
communication – process of communication – barrier in communication – effective communication –
communication and IT.

Unit V: Controlling (Lectures 08)

System and process of controlling – budgetary and non-budgetary control techniques – use of
computers and IT in Management control – Productivity problems and management – control and
performance – direct and preventive control – reporting.

Textbooks:

1. Stephen P. Robbins & Mary Coulter, “Management”, Prentice Hall (India) Pvt. Ltd.
2. JAF Stoner, Freeman R.E and Daniel R Gilbert “Management: Pearson Education.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 103
References:

1. Stephen A. Robbins & David A. Decenzo & Mary Coulter, “Fundamentals of Management” 7th Edition,
Pearson Education.
2. Robert Kreitner & Mamata Mohapatra, “Management”, Biztantra.
3. Harold Koontz & Heinz Weihrich “Essentials of Management” Tata Mc Graw Hill.
4. Tripathy PC & Reddyu Pn,” Principles of Management”, Tata Mc Graw Hill.

*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 104
Course: Artificial Neural Network
Course Code: FOE012 LT P C
3 1 0 4
Objective: This course aims at introducing the fundamental theory and concepts of computational
intelligence methods, Presentation of artificial intelligence as a coherent body of ideas and methods to
acquaint the student with the basic programs in the field and their underlying theory. Students will
explore this through problem-solving paradigms, logic and theorem proving, language and image
understanding, search and control methods and learning.

Learning Outcome:
By the end of this course, the student must be able to:
1. Use various symbolic knowledge representations to specify domains and reasoning tasks of a
situated software agent.
2. Use different logical systems for inference over formal domain representations, and trace how
a particular inference algorithm works on a given problem specification.
3. Understand the conceptual and computational trade-offs between the expressiveness of
different formal representations.

Unit I (Lecture 08)

Artificial Intelligence: Issues, Techniques, Problems, Problem solving state space search; DFS; BFS
Production: System, Problem characteristics; Heuristic Search Techniques; generate and Test; Hill
Climbing; Best First Search; Constraint satisfaction.

Unit II (Lecture 08)

Knowledge representation: Approaches; Issues; Representing simple facts in logic; Resolution and
natural deduction; Representing knowledge using rules; Procedural vs. Declarative knowledge; Forward
v/s Backward chaining.
Slot and Filler Structures: Semantic nets; Frames; Conceptual dependency; Scripts; parsing techniques.

Unit III (Lecture 08)

Introduction to Neural Network: Introduction, Organization of the Brain, Biological and Artificial
Neuron Models, Characteristics of ANN, McCulloch-Pitts Model, Potential Applications of ANN.
Essentials of Artificial Neural Networks: Artificial Neuron Model, Types of Neuron Activation
Function, ANN Architectures, Learning Strategy (Supervised, Unsupervised, Reinforcement).

Unit IV (Lecture 08)

Single Layer Feed Forward Neural Networks: Introduction, Perceptron Models and Training
Algorithms.
Multilayer feed forward Neural Networks: Credit Assignment Problem, Generalized Delta Rule,
Derivation of Back propagation (BP) Training.

Unit V (Lecture 08)

Expert System: Definition and Characteristics; Expert system life cycle & Expert system tools; MYCIN
& DENDRAL.
Associative Memories: Paradigms of Associative Memory, Pattern Engineering, Hebbian Learning,
Bidirectional Associative Memory (BAM) Architecture, BAM Training Algorithms: Storage and Recall
Algorithm, BAM Energy Function, Architecture of Hopfield Network.

Text Books:
1. E Rich. and K Knight, “Artificial Intelligence”, Tata McGraw Hill.
2. S. Rajasekharan and G. A. Vijayalakshmi pai, Neural Networks, Fuzzy logic, Genetic algorithms:
synthesis and applications, PHI Publication.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 105
Reference Books:

1. “Simon Haykin, Neural Networks- A comprehensive foundation, Pearson Education.

2. S.N. Sivanandam, S. Sumathi,S. N. Deepa, Introduction to Neural Networks using MATLAB 6.0”,
TMH.
3. James A Freeman and Davis Skapura, Neural Networks Pearson Education, 2002.
4. Timothy J. Ross, Fuzzy Logic with Engineering Applications, McGraw-Hill Inc.

5. V.S. Janakiraman, K Sarukesi, “Foundation of Artificial Intelligence & Expert System”, Macmillan.

*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 106
[FOE013 amended vide approval dt. July 23, 2018 of V.C]
Course: Industrial Sociology (old name: Industrial Psychology)
Course Code: FOE013 LT P C
3 1 0 4
Objective: Students will learn core psychological competencies including:
1. History of I/O Psychology and its integration into the broader discipline
2. Various fields of psychology from which I/O shares a great deal with (i.e. Social Psychology,
Psychometrics, Motivation, Learning theory, Personality)
Course Outcomes: Student will be able to-
1. Identify major theoretical concepts in psychology, trace their historical development, and
integrate theory, research, and domain-specific knowledge to explain and interpret how the
field of psychology currently advances knowledge.
2. Exhibit effective communication skills for presenting at professional conferences and
publishing in professional journals.

Course Contents:
Unit I (Lectures 08)
Sociology in the industrial Perspective: Concept of Sociology, Sociology as a Science, Sociology
of work & industry, Perspectives for sociological analysis of work, Class- Conflict in Industry, Social
impact of industrialization, Corporate skills in the fast growing multinational set up.

Unit II (Lectures 08)

Work and Social change: Nature of modern societies, emergence of industrial capitalism,
Technology & Social change, the information society after the industrial society, post-modernity,
globalization & Convergence, Significance of the service sector today, work restructuring and
corporate management.
Unit III (Lectures 08)
Work experience in Industry: The concept of alienation, Work satisfaction, Technology & work
experience, and Social background of workers, Work orientations, Stress & anxiety of the worker,
Work & Leisure, Unemployment, Conflicts in the work place.
Unit IV (Lectures 08)
General and Applied Ethics- Ethics and the professions – Standard of right and wrong, problems
of Ethical Certainty, Significance of professional Ethics for Engineers, New Technology and Ethics,
Applied Ethics - Cases in professional Engineering Practice, Principles of business ethics, Individual
in the organization.
Unit V (Lectures 08)
Ethical Leadership: Decision making, corporate culture and reputation management, corporate
social responsibility and social reporting.

Text Books:
1. Sheth N.R., Social Frame Work of Indian Factory, O.U.P. Bombay.
2. Gisbert P., Fundamentals of Industrial Sociology, O.U.P. New Delhi.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 107
3. Watson Tony J., Sociology: Work & Industry, New York. Routledge.
4. Schinzinger, Roland & Mike W. Martin, Introduction to Engineering Ethics- Boston, McGraw Hill.
Reference Books:
1. Fleddermann Charles, Engineering Ethics, Upper Saddle River- N.J. Prentice Hall.
2. Miller & Form, Industrial Sociology, London Harper & Row.
3. Parsons Richard D., The Ethics of Professional Practice- Allyn & Bacon, London.
4. Govindarajan - Engineering Ethics- Prentice Hall (India) New Delhi.

*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 108
Course: Organizational Behaviour
Course Code: FOE014 LT P C
3 1 0 4
Objective: This course is to understand the concept of Organizational Behaviour.
Course Outcomes: Students are expected to be able to-
 Discuss individual behaviour, values, personality
 Summarized the perception learning emotion attitude & motivation in organization.

Course Contents:
Unit – I (Lecture 08)
Concept, Nature, Characteristics, Models of Organizational Behaviour, Management Challenge,
Organizational Goal. Global challenges and Impact of culture.

Unit – II (Lecture 08)

Perception: Concept, Nature, Process, Importance. Attitudes and Workforce Diversity.
Personality: Concept, Nature, Types and Theories of Personality Shaping, Learning: Concept and
Theories of Learning.

Unit – III (Lecture 08)

Motivation: Concepts and Their Application, Principles, Theories, Motivating a Diverse Workforce.
Leadership: Concept, Function, Style and Theories of Leadership-Trait, Behavioural and Situational
Theories. Analysis of Interpersonal Relationship.

Unit – IV (Lecture 08)

Organizational Power and Politics: Concept, Sources of Power, Approaches to Power, Political
Implications of Power. Knowledge Management & Emotional Intelligence in Contemporary Business
Organization.
Organizational Change: Concept, Nature, Resistance to change, Managing resistance to change,
Implementing Change.

Unit –V (Lecture 08)

Conflict: Concept, Sources, Types, Functionality and Dysfunctional of Conflict, Classification of
Conflict Intra, Individual, Interpersonal, Intergroup and Organizational, Resolution of Conflict, Stress:
Understanding Stress and Its Consequences, Causes of Stress, Managing Stress.

Text Books:

1. Dwivedi, D. N, Managerial Economics, Vikas Publishing House.

2. Varshney & Maheshwari, Managerial Economics, Sultan Chand & Sons.

Reference Books:

1. Robbins Stephen P., Organizational Behavior Pearson Education

2. Hersey Paul, “Management of Organizational Behavior: Leading Human Resources” Blanchard,
Kenneth H and Johnson Dewey E., Pearson Education
3. Khanka S. S. “Organizational Behavior

*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 109
Course: Engineering and Managerial Economics
Course Code: FOE015 LT P C
3 1 0 4
Objective:
1. To understand the concepts of Economics, Managerial Economics and its scope in engineering
perspective
2. To study demand analysis, demand forecasting and market structure.
Course Outcomes: Students would be able to
1. Understand role of managerial economics in engineering perspective.
2. Understand concepts of demand analysis.
3. Understand market structure and price determination in different market condition.
4. Understand the meaning and causes of inflation.

Course Contents:
Unit-I (Lectures 08)
Introduction: Meaning, Nature and Scope of Economics, Meaning of Science, Engineering and
Technology; Managerial Economics and its scope in engineering perspective.

Unit-II (Lectures 08)

Demand: Basic Concepts Demand Analysis; Law of Demand; Determinates of Demand; Elasticity of
Demand-Price, Income and cross Elasticity; Uses of concept of elasticity of demand in managerial
decisions.

Unit-III (Lectures 08)

Forecasting: Demand forecasting; Meaning, significance and methods of demand forecasting;
production function; Laws of returns to scale & Law of Diminishing returns scale.
Short and Long run Cost curves: fixed cost, variable cost, average cost, marginal cost, Opportunity
cost.

Unit-IV (Lectures 08)

Market Study: Market Structure Perfect Competition; Imperfect competition: Monopolistic
competition, Monopoly, Oligopoly, Duopoly Sorbent features of price determination and various
market conditions.

Unit-V (Lectures 08)

Inflation: National Income; Concept of N.I. and Measurement; Inflation: Meaning of Inflation; Type,
causes & prevention methods; Business Cycles, Phases of business cycle.

Text Books:
1. Koutsoyiannis, A : Modern Microeconomics, ELBS.
2. Kakkar, D.N., Managerial Economics for Engineering, New Age International Publication.
Reference Books:
1. Dwivedi, D.N., Managerial Economics, Vikas Publishing.
2. Maheshwari, Y., Managerial Economics, Prentice Hall of India.
*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 110
Course: Network security & cryptography
Course Code: FOE016 LT P C
3 1 0 4

Objective: The goal is to become familiar with basic techniques to protect data in computer and
communication environments against several different varieties of fraud.

Learning Outcome: This course will enable you to

1. Compare and contrast a range of different cryptosystems from an applied viewpoint.

2. List and elaborate the differences between secret key and public key cryptosystems.
3. Identify the different approaches to quantifying secrecy.
4. Recognize the different modes of operation for block ciphers and their applications.
5. Explain the role of hash functions in Information Security.
6. Discuss the place of ethics in the Information Security Area.

Course Contents:
Unit I (Lectures 08)
Network Security: Attacks; Services & Mechanisms; Conventional Encryption: Classical
Encryption Techniques, Steganography.

Unit II (Lectures 08)

Encryption Schemes: DES: Standard, Strength; Block Cipher Design Principles; Block Cipher
Modes of Operation: Triples DES; Key Distribution, Random Number Generation.

Unit III (Lectures 08)

Public-Key Cryptography: Principles; RSA Algorithm; Key Management; Fermat’s & Euler’s
Theorems; Primarily Miller Test; Chinese Remainder Theorem.

Unit IV (Lectures 08)

Message Authentication & Hash Functions: Authentication: Requirements, Protocols, Introduction to
Message Authentication Codes and Hash Functions, MD5 Message Digest Algorithm, Secure Hash
Algorithm (SHA), Digital Signature.

Unit V (Lectures 08)

IP Security: Electronic Mail Security; Pretty Good Privacy (PGP); S/MIME; Authentication
Header; Encapsulating Security Payloads.
Web Security: Secure Socket Layer & Transport Layer Security, Secure Electronic Transaction
(Set);

Text Books:

1. Stallings, W., Cryptography and Network Security: Principles and Practice, Prentice Hall.
2. Kahate, A., Cryptography and Network Security, Tata McGraw Hill.

Reference Books:

1. Johannes, A. B., Introduction to Cryptography, Springer.

*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 111
Semester VIII
Computer Aided Manufacturing (CAM)
Course Code: EME811 L T P C
3 1 0 4

Objective:
1. To know about automation, numerical control (NC) machines and computer aided
manufacturing systems.
2. basic understanding of computer numerical control (CNC) machining processes and operations
using a combination of G-codes, milling and turning equipment.
Course Outcomes: Student will able to
1. demonstrate a basic understanding of machining fundamentals including speed and feed
calculations, tooling systems, and work-holding systems for CNC milling and turning
equipment
2. demonstrate a basic understanding of numerical controlled (NC) programming strategies
3. demonstrate an ability to set-up, program, and operate CNC milling and turning equipment.
4. demonstrate an ability to generate NC code using G-codes to machine parts to specifications.

Course Content:
Unit- I (Lectures 8)
Automation:
Introduction to CAM; Automated Manufacturing system; Need of automation; Basic elements of
automation; Levels of automation; Advantages & disadvantages of automation.
NC Machines: Features of NC Machines; Fundamental of Numerical Control; CNC machines; Direct
Numerical Control (DNC); Elements of NC machine tools; Classification of NC machine tools;
Advantages; and limitations of NC machine tools; Application of NC system; Factors affecting selection of
components for machining on CNC machine tools.

Unit II (Lectures 8)
NC Part Programming:
(a) Manual programming; Examples of Drilling; Turning and Milling operations; Canned cycles;
Subroutine and macro.
(b) APT programming, Geometry; Motion and additional statements; Macro- statement.
Control of NC Systems: Open and closed loops; Control of point to point systems; Incremental and
absolute systems; Control loop in contouring systems; Adaptive control.

Unit III (Lectures 8)

Group Technology: Introduction, part families, part classification and coding; Machining cells;
Benefits of group technology; Computer aided process planning: Retrieval and generative types.

Unit IV (Lectures 8)
Computer Integrated Manufacturing System: Introduction to CIM, Elements of CIM, CIM wheel,
Benefits of CIM.
Flexible Manufacturing System: Introduction & Component of FMS; Needs of FMS; General FMS
consideration; Objectives, types and advantages of FMS, Automatic storage and retrieval system,
Automated guided vehicles; Computer aided inspection.

Unit V (Lectures 8)
Robotics: Introduction; Basic elements of a robot; Classification of robot; Physical configuration of robot;
Basic robot motions; Technical features; Actuators; Sensors; Robot application; Robot applications;
economics, Intelligent robots, interfacing of a vision system with a Robot, Robot programming methods.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 112
Text Books:

1. Groover Mikell P., Automation, Production Systems and Computer Integrated Manufacturing,
Prentice Hall.
2. Kundra, Rao & Tiwari, Computer Aided Manufacturing, Tata McGraw Hill.
3. Koren, Computer Control of Manufacturing Systems, McGraw-Hill
4. Adithan M. & Pabla B. S., CNC Machines, New Age Publishers

References Books:

1. Martin S.J., NC Machine Tools, English University Press

2. Groover, CAD/CAM, Prentice Hall
3. Chang Tien Chien, Computer Aided Manufacturing, Pearson Education
4. Koren Y. Robotics for Engineer, McGraw Hill
5. Sinha S.K. CNC programming, Golgotia publications.
6. Rao P. N., CAD/CAM, Principles and Applications, McGraw Hill.
7. Vajpayee S. Kant, Computer integrated manufacturing, Prentice Hall of India
8. Radhakrishnan P., "Computer Numerical Control", New Central Book Agency

*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 113
Semester VIII
Unconventional Manufacturing Processes
Course Code: EME812
L T P C
3 1 0 4
Objective:
1. To study about principle of working and applications of various types of unconventional
manufacturing processes.
2. To have a basic understanding of the machining capabilities, limitations, and productivity of
advanced unconventional manufacturing processes.
Course Outcomes: Student will able to apply the working principles and processing characteristics of ultra-
precision machining, high-speed machining methods, and nontraditional machining to the production of precision
components.

Course Contents:
Unit I (Lectures 8)
Introduction: Limitations of conventional manufacturing processes; Need of unconventional manufacturing
processes and its classification.

Unit II (Lectures 8)
Unconventional Machining Process: Principles, working and applications of unconventional machining process
such as Electro-Discharge machining, Electro-chemical machining, Ultrasonic machining, Abrasive jet
machining.

Unit III (Lectures 8)

Principles, working and application of unconventional machining processes such as Laser beam machining,
Electron beam machining, Ultrasonic machining

Unit IV (Lectures 8)
Unconventional welding processes: Explosive welding and cladding; Under-water welding; Metalizing; Plasma
arc welding/cutting

Unit V (Lectures 8)
Unconventional Forming processes: Principles, working and applications of High energy forming processes
such as explosive forming, electromagnetic forming, electro-discharge forming, water hammer forming,
Explosive compaction.

Text Books
1. Pandey P.C., Modern Machining Processes, Tata McGraw Hill

Reference Book
1. Jain V.K., Unconventional Machining, Allied Publishers Pvt. Ltd

*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 114
Semester VIII
Mechatronics
Course Code: EME813 L T P C
3 1 0 4
Objective: The aim of the subject of the Introduction to Mechatronics is to get the students acquainted
with basic issues and principles of mechatronics and to show examples of differences between
mechatronic systems and classic constructions. The task of the subject is to explain the principles of
activity of basic functional blocks of mechatronic system.

Course Outcomes: Student will able to

1. Employ the knowledge of mathematics, science, and engineering.
2. Understand basic principles of Mechatronics, explains typical cases of mechatronic systems at
construction of machines, robotics, aircraft industry and automotive industry.

Course Contents:
Unit I (Lectures 8)
Introduction: Definition, trends, control methods; Stand alone, PC based (Real Time Operating
Graphical User Interface, Simulation); Applications: SPM, Robot, CNC, FMS, CIM

Unit II (Lectures 8)
Signal Conditioning: Introduction; Hardware; Digital I/O; Analog input: ADC, resolution, speed
channels; Filtering noise using passive components; Resistors, Capacitors; Amplifying signals using OP
amps; Software; Digital Signal Processing; Low pass, high pass, notch filtering.

Unit III (Lectures 8)

Precision Mechanical Systems: Pneumatic actuation systems; Electro-pneumatic actuation systems;
Hydraulic actuation systems; Electro-hydraulic actuation systems; Timing belts, Ball screw and nuts;
Linear motion guides; Linear bearings, Harmonic transmission; Bearings; Motor drive selection.

Unit IV (Lectures 8)
Electronic Interface Subsystems: TTL, CMOS interfacing; Sensor interfacing; Actuator interfacing;
Solenoids; Motors isolation schemes: Opto coupling, Buffer IC’s, Protection schemes: Circuit breakers,
over current sensing, reset able fuses; Thermal dissipation; Power Supply; Bipolar transistors; mosfets.

Unit V (Lectures 8)
Electromechanical Drives: Relays and solenoids; Stepper Motors; DC brushed motors; DC brushless
motors; DC servo motors; 4-quadrant servo drives; PWM’s: Pulse width modulation, Variable
Frequency Drives; Vector Drives; Drive System load calculation.

Text Books:
1. Bolton W., Mechatronics Electronics Control Systems in Mechanical and Electrical Engineering,
Pearson Education Press.
2. Singh M.D., Joshi J.G., Mechatronics, PHI.

Reference Books:
1. Newton C Braga, Mechatronics Source Book, Thomson Publications, Chennai.
2. Shanmugam N. & Anuradha, Mechatronics, Agencies Publishers.
3. Devdas Shetty, Richard & Thomson, Mechatronics System Design, PWS Publishing

*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 115
Semester VIII
Computer Aided Manufacturing (CAM) (Lab)

Course Code: EME861 L T P C

0 0 3 2
Objective:
1. To introduces students to software and equipment associated with CAM.
2. To build basic concepts about CAM.
3. To learn the different CNC Machine’s Basic working principal like Axis movements, G & M code
Development Programing and Test run of Programmed part.

List of Experiments:
1. To write a part-program for a given job for lathe and running on NC machine.
2. To write a part-program for a job for drilling operation (point-to- point) and running on NC
machine.
3. To write a part program for a job for milling operation and running on NC machine.
4. To generate a part program for lathe operation using software.
5. To generate a part program for drilling operation using software.
6. To generate a part program for milling operation using software.
7. To obtain different types of motion for Robots.
8. To identify the differences between conventional lathe machine and NC lathe machine.
9. To generate automatic process plan for a given diagram.
10. To learn the grouping of parts according to Group Technology philosophy.

Evaluation Scheme of Practical Examination:

Internal Evaluation (50 marks)

Each experiment would be evaluated by the faculty concerned on the date of the experiment on a 4-point
scale which would include the practical conducted by the students and a Viva taken by the faculty
concerned. The marks shall be entered on the index sheet of the practical file.

Evaluation scheme:

PRACTICAL PERFORMANCE & VIVA DURING THE ON THE DAY OF EXAM

SEMESTER (35 MARKS) (15 MARKS) TOTAL
EXPERIMENT FILE WORK VIVA ATTENDANCE EXPERIMENT VIVA INTERNAL
(5 MARKS) (10 MARKS) (10 MARKS) (10 MARKS) (5 MARKS) (10 MARKS) (50 MARKS)

External Evaluation (50 marks)

The external evaluation would also be done by the external Examiner based on the experiment conducted
during the examination.

EXPERIMENT FILE WORK VIVA TOTAL EXTERNAL

(20 MARKS) (10 MARKS) (20 MARKS) (50 MARKS)

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 116
Semester VIII
Unconventional Manufacturing Process (Lab)
Course Code: EME862 L T P C
0 0 3 2
Objectives:
1. To Identify the classification of modern machine processes.
2. To understand the mechanism of Abrasive jet machining, Water jet machining and abrasive water
jet machine.
3. To understand the applications of plasma process for machine processes.
4. Complete understanding on modern machine processes.

List of Experiments-
1. To prepare a cavity with Abrasive jet machining.
2. To study effect of parameters of EDM on MRR.
3. To study effect of parameters of EDM on surface finish.
4. To prepare hole in mild steel plate on EDM.
5. To prepare a given profile in mild steel plate using Laser beam machining.
6. To prepare a weld joint using Plasma arc welding
7. To cut the given shape in a mild steel plate using Plasma arc machine
8. To prepare a given shape with the help of water hammer forming.
9. To prepare a given job using ultrasonic machining.
10. To compare the surface roughness of the surface prepared on EDM and ultrasonic machining.

Evaluation Scheme of Practical Examination:

Internal Evaluation (50 marks)

Each experiment would be evaluated by the faculty concerned on the date of the experiment on a 4-point
scale which would include the practical conducted by the students and a Viva taken by the faculty
concerned. The marks shall be entered on the index sheet of the practical file.

Evaluation scheme:

PRACTICAL PERFORMANCE & VIVA DURING THE ON THE DAY OF EXAM

SEMESTER (35 MARKS) (15 MARKS) TOTAL
EXPERIMENT FILE WORK VIVA ATTENDANCE EXPERIMENT VIVA INTERNAL
(5 MARKS) (10 MARKS) (10 MARKS) (10 MARKS) (5 MARKS) (10 MARKS) (50 MARKS)

External Evaluation (50 marks)

The external evaluation would also be done by the external Examiner based on the experiment conducted
during the examination.

EXPERIMENT FILE WORK VIVA TOTAL EXTERNAL

(20 MARKS) (10 MARKS) (20 MARKS) (50 MARKS)

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 117
Semester VIII
Mechatronics (Lab)
Course Code: EME863 L T P C
0 0 3 2
Objectives:
This course introduces the student to the concept of a combination of mechanical and electronic devices
(Mechatronics), which incorporate pneumatic and hydraulic equipment controlled by PLC’s or parallel
interfaced computers.

List of Experiment-
1. To measure speed using Inductive pickup/Proximity sensor
2. To measure temperature using thermocouple/thermistor/RTD
3. To measure displacement using LVDT
4. To measure position and velocity encoders
5. To measure angles using capacitive transducer.
6. To control speed of DC motor using PLC.
7. To test Relays using PLC.
8. To identify amplified signals using OP amps
9. Linear actuation of hydraulic cylinder with counter and speed control.
10. Hydrometer rotation with timer and speed control.
11. Sequential operation of pneumatic cylinders.

Evaluation Scheme of Practical Examination:

Internal Evaluation (50 marks)

Each experiment would be evaluated by the faculty concerned on the date of the experiment on a 4-point
scale which would include the practical conducted by the students and a Viva taken by the faculty
concerned. The marks shall be entered on the index sheet of the practical file.

Evaluation scheme:

PRACTICAL PERFORMANCE & VIVA DURING THE ON THE DAY OF EXAM

SEMESTER (35 MARKS) (15 MARKS) TOTAL
EXPERIMENT FILE WORK VIVA ATTENDANCE EXPERIMENT VIVA INTERNAL
(5 MARKS) (10 MARKS) (10 MARKS) (10 MARKS) (5 MARKS) (10 MARKS) (50 MARKS)

External Evaluation (50 marks)

The external evaluation would also be done by the external Examiner based on the experiment conducted
during the examination.

EXPERIMENT FILE WORK VIVA TOTAL EXTERNAL

(20 MARKS) (10 MARKS) (20 MARKS) (50 MARKS)

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 118
Semester VIII
Project Work Phase-II
Course Code: EME898 L T P C
0 0 14 7

Students should devote themselves to prepare something tangible, which could be a working model of
their thoughts based on their subject of choice.

The project shall be finalized by the students based on the VII semester project work report and shall be
completed (100% working condition) and submitted at least one month before the last teaching day of the
VIII semester, date of which shall be notified in the academic calendar.

The assessment of performance of students should be made at least twice in each semester i.e. VII and
VIII. In this semester student shall present the final project live as also using overheads project or power
point presentation on LCD to the internal committee as also the external examiner.

The evaluation committee shall consist of faculty members constituted by the college which would
comprise of at-least three members comprising of the Department Coordinator, Class Coordinator and a
nominee of the Director/Principal. The students guide would be a special invitee to the presentation. The
seminar session shall be an open house session. The internal marks would be the average of the marks
given by each member of the committee separately in a sealed envelope to the Director/Principal.

The marking shall be as follows.

Internal: 50 marks
By the Faculty Guide - 25 marks.
By Committee appointed by the Director/Principal – 25 marks.

External: 50 marks
By External examiner appointed by the University – 50 marks.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 119
Semester VIII
DISCIPLINE & GENERAL PROFICIENCY

Course Code: EGP811 C-1

There shall be continuous evaluation of the student on the following broad parameters:

1. Observance of dress code.

2. Participation in Conferences /Workshops / Seminars.
3. Attendance in guest lectures, invited talks and special technical sessions organized from time to time.
4. Participation in community projects including NSS.
5. Exhibiting team spirit in different Culture & extra curriculum activities, Department Club activities of
the University and College organized from time to time.
6. Observance of rule & regulations in the College/University, Behavior in Campus Premises, Bus, hostel
mess and hostel.
7. Performance and awards received in different events (sports/ co-curricular activities) organized at
College / University and other level.
8. General behavior
9. Any extraordinary achievement.

The above is an indicative list of parameters on which the students shall be continuously evaluated. The
college may evaluate the student on the specific parameters by informing them through a notice displayed
on the notice board before evaluation. There shall be no external examination for this course; however,
the marks shall be included for calculation of cumulative Performance Index (CPI).

Head of Department would be display GP marks on notice board in prescribed format after IInd & IIIrd
CT in semester:

Cultural Events
Coordinator &

Mentor
Coordinator

Director or
Principal
Mentor
Mentor
marks

Head

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 120
Semester VIII
Open Elective-II

Course: Machine learning & Data Analytics

Course Code: FOE021 LT P C
3 1 0 4
Objective:
1. Be able to formulate machine learning problems corresponding to different applications.
2. Understand a range of machine learning algorithms along with their strengths and weaknesses.
Course Outcome: By the end of the module, students should:
1. develop an appreciation for what is involved in learning from data.
2. understand a wide variety of learning algorithms.
3. understand how to apply a variety of learning algorithms to data.
4. understand how to perform evaluation of learning algorithms and model selection.

Course Contents:
Unit I (Lectures 08)

Introduction, Different Types of Learning, Hypothesis Space & Inductive Bias, Evaluation and Cross- Validation,
Linear Regression, Introduction to Decision Trees, Learning Decision Tree, Overfitting

Unit II (Lectures 08)

K- Nearest Neighbour, Feature Selection, Feature Extraction, Collaborative Filtering, Bayesian Learning, Naïve
Bayes, Bayesian Network

Unit III (Lectures 08)

Logistic Regression, Introduction of Support Vector machine, The Dual Formulation, Maximum Margin with
Noise, Nonlinear SVM & Kernel Function, Solution to the Dual Problem.

Unit IV (Lectures 08)

Multilayer Neural Network, Neural Network and Backpropagation Algorithm, Deep Neural Network

Introduction to Computational Learning Theory, Sample Complexity: Finite Hypothesis Space, VC Dimension

Unit V (Lectures 08)

Introduction to Ensembles, Bagging and Boosting, Introduction to Clustering, Kmeans Clustering, Agglomerative
Hierarchical Clustering,

Test Books:
1. Machine Learning by Tom M. Mitchell, Mc Graw Hill Publication.
2. Machine Learning: A Probabilistic Perspective (Adaptive Computation and Machine Learning series) by
Kevin P. Murphy, MIT Press.
3. Deep Learning (Adaptive Computation and Machine Learning series) by Ian Good fellow, Yoshua Bengio
and Aaron Courville, MIT Press.
4. Introduction to Machine Learning with Python: A Guide for Data Scientists by Andreas Muller.

*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 121
Course: Total Quality Management
Course Code: FOE022 LT P C
3 1 0 4

Objective: To study about quality concepts, management policies, control charts.

Course Outcomes: Upon completion of the subject, students will be able to
a. select and apply appropriate techniques in identifying customer needs, as well as the quality impact
that will be used as inputs in TQM methodologies;
b. measure the cost of poor quality and process effectiveness and efficiency to track performance
quality and to identify areas for improvement;
c. understand proven methodologies to enhance management processes, such as benchmarking and
business process reengineering
d. choose a framework to evaluate the performance excellence of an organization, and determine the
set of performance indicators that will align people with the objectives of the organization.

Course Contents:
Unit I (Lectures 08)
Quality Concepts: Introduction; Meaning; Quality characteristics of goods and services; Evolution of
Quality control, TQM; Modern concept, Basic concepts of quality; Dimensions of quality; Juran’s quality
trilogy; Deming’s 14 principles; PDCA cycle; Total quality management (TQM) models.

Unit II (Lectures 08)

Quality Management: Organizational structure and design; Quality function; Decentralization;
Designing and fitting organization for different types products and company; Human Factor in Quality:
Attitude of top management; Co-operation of groups; Operators attitude, responsibility; Causes of
operators error and corrective methods; Quality circles.

Unit III (Lectures 08)

Quality improvement and cost reduction: 7 QC tools and new QC tools; Economics of quality value
and contribution; Quality cost; Optimizing quality cost; Quality assurance.

Unit IV (Lectures 08)

Control Charts: Theory of control charts; Control charts construction: Construction of Mean & Range
charts, fraction defective chart and number of defective charts; Attributes control charts: Defects,
construction and analysis of c-chart.

Unit V (Lectures 08)

IS0-9000, Six sigma and TPM: ISO 9000 series; Concept of Six Sigma and its application; Total
Productive Maintenance (TPM).

Text Books:
1. Sharma D. D Total Quality Management, S. Chand.
2. LaI H., Total Quality Management, Wiley Eastern Limited.
3. Greg Bounds, Beyond Total Quality Management, McGraw Hill.

Reference Books:
1. Menon, H.G., TQM in New Product Manufacturing, McGraw Hill.

*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 122
Course: Entrepreneurship
Course Code: FOE023 LT P C
3 1 0 4
Objectives: To develop and strengthen entrepreneurial quality and motivation in students and to impart
basic entrepreneurial skills and understanding to run a business efficiently and effectively.

Course Outcome: Upon completion of the course, students will be able to gain knowledge and skills
needed to run a business successfully

Unit I : (Lectures 08)

Entrepreneurship:
Entrepreneur – Types of Entrepreneurs – Difference between Entrepreneur and Intrapreneur
Entrepreneurship in Economic Growth, Factors Affecting Entrepreneurial Growth.

Unit II: (Lectures 08)

Motivation:
Major Motives Influencing an Entrepreneur – Achievement Motivation Training, Self-Rating, Business Games,
Thematic Apperception Test – Stress Management, Entrepreneurship Development Programs – Need, Objectives.

Unit III: (Lectures 08)

Business:
Small Enterprises – Definition, Classification – Characteristics, Ownership Structures – Project Formulation –
Steps involved in setting up a Business – identifying, selecting a Good Business opportunity, Market Survey and
Research, Techno Economic Feasibility Assessment – Preparation of Preliminary Project Reports – Project
Appraisal – Sources of Information – Classification of Needs and Agencies.

Unit IV: (Lectures 08)

Financing and Accounting:
Need – Sources of Finance, Term Loans, Capital Structure, Financial Institution, Management of working Capital,
Costing, Break Even Analysis, Taxation – Income Tax, Excise Duty – Sales Tax.

Unit V: (Lectures 08)

Support to Entrepreneurs:
Sickness in small Business – Concept, Magnitude, Causes and Consequences, Corrective Measures – Business
Incubators – Government Policy for Small Scale Enterprises – Growth Strategies in small industry – Expansion,
Diversification, Joint Venture, Merger and Sub Contracting.

Text Books:
1. Khanka. S.S., “Entrepreneurial Development” S. Chand & Co. Ltd., Ram Nagar, New Delhi.

2. Donald F Kuratko, “Entrepreneurship – Theory, Process and Practice”, Cengage Learning.

References:
1. Hisrich R D, Peters M P, “Entrepreneurship” 8th Edition, Tata McGraw-Hill.

2. Mathew J Manimala, “Entrepreneurship theory at cross roads: paradigms and praxis” 2nd Edition Dream
tech.

3. Rajeev Roy, ‘Entrepreneurship’, Oxford University Press.

4. EDII “Faulty and External Experts – A Hand Book for New Entrepreneurs Publishers: Entrepreneurship
Development”, Institute of India, Ahmadabad.

*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 123
Course: Big Data & Hadoop
Course Code: FOE024 LT P C
3 1 0 4
Course Objective: This course will cover the basic concepts of big data, methodologies for analyzing
structured and unstructured data with emphasis on the relationship between the Data Scientist and the
business needs.
Course Outcome:
1. Model and implement efficient big data solutions for various application areas using appropriately
selected algorithms and data structures.
2. Motivate and explain trade-offs in big data processing technique design and analysis in written and
oral form.
3. Explain the Big Data Fundamentals, including the evolution of Big Data, the characteristics of Big
Data and the challenges introduced.
4. Apply non-relational databases, the techniques for storing and processing large volumes of structured
and unstructured data, as well as streaming data.
5. Apply the novel architectures and platforms introduced for Big data, in particular Hadoop and
MapReduce.

UNIT I – INTRODUCTION TO BIG DATA (Lectures 08)

Introduction – distributed file system – Big Data and its importance, Four Vs Drivers for Big data, Big data
analytics, Big data applications. Algorithms using map reduce, Matrix-Vector Multiplication by Map Reduce.

UNIT II – INTRODUCTION HADOOP (Lectures 08)

Big Data – Apache Hadoop & Hadoop EcoSystem – Moving Data in and out of Hadoop – Understanding
inputs and outputs of MapReduce - Data Serialization.

UNIT- III HADOOP ARCHITECTURE (Lectures 08)

Hadoop Architecture, Hadoop Storage: HDFS, Common Hadoop Shell commands, Anatomy of File Write and
Read., NameNode, Secondary NameNode, and DataNode, Hadoop MapReduce paradigm, Map and Reduce
tasks, Job, Task trackers - Cluster Setup – SSH & Hadoop Configuration – HDFS Administering –Monitoring
& Maintenance.

UNIT-IV HADOOP ECOSYSTEM AND YARN (Lectures 08)

Hadoop ecosystem components - Schedulers - Fair and Capacity, Hadoop 2.0 New Features- NameNode High
Availability, HDFS Federation, MRv2, YARN, Running MRv1 in YARN.

UNIT-V HIVE AND HIVEQL, HBASE (Lectures 08)

Hive Architecture and Installation, Comparison with Traditional Database, HiveQL - Querying Data - Sorting
and Aggregating, Map Reduce Scripts, Joins & Subqueries, HBase concepts- Advanced Usage, Schema
Design, Advance Indexing - PIG, Zookeeper - how it helps in monitoring a cluster, HBase uses Zookeeper and
how to Build Applications with Zookeeper.

Text Books:
1. Boris lublinsky, Kevin t. Smith, Alexey Yakubovich, “Professional Hadoop Solutions”, Wiley.
2. 2.Chris Eaton, Dirk deroos et al., “Understanding Big data”, McGraw Hill.
3. 3.Tom White, “HADOOP: The definitive Guide”, O Reilly.
4. 4.Vignesh Prajapati, “Big Data Analytics with R and Haoop”, Packet Publishing.
Reference Books:
1. Tom Plunkett, Brian Macdonald et al, “Oracle Big Data Handbook”, Oracle Press.
2. http://www.bigdatauniversity.com/
3. Jy Liebowitz, “Big Data and Business analytics”, CRC press.
*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 124
Course: Financial Management
Course Code: FOE025 LT P C
3 1 0 4
Objective: The basic objective of this course to understand the functions, roles, goals and the processes
of financial management.
Course Outcomes: students should be to-
• Understand both the theoretical and practical role of financial management in business corporations.
• Analyse the finances of individual corporations both in terms of their performance and capital
requirements.
• Evaluate the role and importance of shareholders within modern corporations.

Course Contents:
Unit I (Lectures 08)
Introduction: Concept of finance, scope and objectives of financial management; Functions of Finance
Manager in Modern Age; Financial decision areas; Time value of money; Risk and Return analysis;
Valuation of Securities.

Unit II (Lectures 08)

Investment Decision; Appraisal of project; Techniques of capital budgeting and its applications; Risk
and Uncertainty in Capital Budgeting; Leverage analysis: Financing, operating and combined leverage
and its implications; EBIT-EPS analysis.

Unit III (Lectures 08)

Financing Decision: Long-term sources of finance, Concept and approaches of capital
structure decision: NI, NOI, Traditional and Modigliani Miller Approach; Cost of capital equity
share, preference share, debentures, weighted average cost of capital.

Unit IV (Lectures 08)

Working Capital: Concept of Gross Working Capital and Net Working Capital, Various
Approaches to Working Capital Management, Factors affecting working capital requirement
and sources of working capital financing, Management of inventory, receivables and cash.

Unit V (Lectures 08)

Dividend Decision: Dividend policies; Factors affecting dividend policies, Dividend Theories,
Bonus policy guidelines relating to dividend declaration and payment.

Text Books:
1. Pandey I.M., Financial Management, Vikas Publications.
2. Khan & Jain, Financial Management, Tata McGraw-Hill.
3. Chandra Prasanna, Fundamentals of Financial Management TMH.
Reference Books:
1. Smith K.V., Management of Working Capital, 2nd edition, Harper Collins Publications.
2. Agarwal J.D., Working Capital Management, Tata McGraw-Hill.
*Latest editions of all the suggested books are recommended.

B.Tech. (ME) Syllabus Applicable w.e.f. Academic Session 2016-17 Page 125

NICET Exam Pathway 2025/2026 Version: Train For Success With 600 Proven Practice Questions For The National Institute For Certification In
From Everand
NICET Exam Pathway 2025/2026 Version: Train For Success With 600 Proven Practice Questions For The National Institute For Certification In
Brittany Deaton
No ratings yet
Screenshot 20220930-071515 Drive
No ratings yet
Screenshot 20220930-071515 Drive
1 page
Screenshot 20220930-071520 Drive
No ratings yet
Screenshot 20220930-071520 Drive
1 page
Syllabus of Physics B. Sc. Semester Wise
No ratings yet
Syllabus of Physics B. Sc. Semester Wise
27 pages
PMI-SP® Exam Focus: Study Guide with Practice Tests
From Everand
PMI-SP® Exam Focus: Study Guide with Practice Tests
SUJAN
No ratings yet
MSC Physics Syllabus
No ratings yet
MSC Physics Syllabus
42 pages
Technical and Graphical Analysis
90% (10)
Technical and Graphical Analysis
66 pages
RRB Alp Vacancy 67dce3a1c68dd77801203
No ratings yet
RRB Alp Vacancy 67dce3a1c68dd77801203
2 pages
AAI JE ATC Official Paper Held On 21 Feb 2023 Shift 1
No ratings yet
AAI JE ATC Official Paper Held On 21 Feb 2023 Shift 1
35 pages
Anuj Maurya Final Resume To Vijay Soni
No ratings yet
Anuj Maurya Final Resume To Vijay Soni
2 pages
India Coastal Features
No ratings yet
India Coastal Features
28 pages
Chevrolet Chevy Astro Van Shop Manual
100% (1)
Chevrolet Chevy Astro Van Shop Manual
1,665 pages
BSC Chemistry Syllabus
No ratings yet
BSC Chemistry Syllabus
24 pages
S&C SMU-20 Rec Total
No ratings yet
S&C SMU-20 Rec Total
1 page
Le Mock 35 Ques @legaledgemock
No ratings yet
Le Mock 35 Ques @legaledgemock
40 pages
Vortex Manual
No ratings yet
Vortex Manual
4 pages
JIS-G-3312-2019-Prepainted Hot-Dip Zinc-Coated Steel Sheet and Strip
No ratings yet
JIS-G-3312-2019-Prepainted Hot-Dip Zinc-Coated Steel Sheet and Strip
31 pages
B.Tech. ME 2022-23 Study & Evaluation Scheme
No ratings yet
B.Tech. ME 2022-23 Study & Evaluation Scheme
164 pages
Food Chains and Food Webs
No ratings yet
Food Chains and Food Webs
8 pages
R22 CSE (AI&ML) Syllabus Modified
No ratings yet
R22 CSE (AI&ML) Syllabus Modified
534 pages
Group 7 Spiritual Self
No ratings yet
Group 7 Spiritual Self
19 pages
Brand Guidelines 2024
No ratings yet
Brand Guidelines 2024
27 pages
978 3 659 24241 0 PDF
No ratings yet
978 3 659 24241 0 PDF
110 pages
Special Program in Sports Curriculum Map
No ratings yet
Special Program in Sports Curriculum Map
10 pages
Screenshot 2025-05-20 at 14.00.21
No ratings yet
Screenshot 2025-05-20 at 14.00.21
236 pages
GJESM Volume 8 Issue 2 Pages 197-208
No ratings yet
GJESM Volume 8 Issue 2 Pages 197-208
12 pages
Circuits MCQ DR Haitham
No ratings yet
Circuits MCQ DR Haitham
7 pages
(Code: 4340501) : Process Heat Transfer Course Code: 4340501
100% (1)
(Code: 4340501) : Process Heat Transfer Course Code: 4340501
9 pages
Mechanical Syllabus Sem 7
No ratings yet
Mechanical Syllabus Sem 7
31 pages
EEE R13 Min
No ratings yet
EEE R13 Min
145 pages
Doubtful Question
No ratings yet
Doubtful Question
3 pages
Admission Form English
No ratings yet
Admission Form English
5 pages
2022-FCI Category-II ZONE-WISE RECRUI
No ratings yet
2022-FCI Category-II ZONE-WISE RECRUI
4 pages
6.23 NB.E. Mechanical Engineering Sem I II 2
No ratings yet
6.23 NB.E. Mechanical Engineering Sem I II 2
136 pages
Basic English Grammar Am, Is, Are Worksheets Online
No ratings yet
Basic English Grammar Am, Is, Are Worksheets Online
2 pages
Grammar Quiz: MAY Might
No ratings yet
Grammar Quiz: MAY Might
2 pages
MIT-Academic Regulations-2022 Curriculum
No ratings yet
MIT-Academic Regulations-2022 Curriculum
14 pages
Gurley, Bill J, - Clinically Relevant Herb Mineral Vitamin Intrxn
No ratings yet
Gurley, Bill J, - Clinically Relevant Herb Mineral Vitamin Intrxn
9 pages
Regional Geology of Myanmar
No ratings yet
Regional Geology of Myanmar
20 pages
B.tech Cse (Ai&Ml) Cs Ar Syllabus 1&2 Yrs
No ratings yet
B.tech Cse (Ai&Ml) Cs Ar Syllabus 1&2 Yrs
147 pages
Btechcse 2022 23 Latest New
No ratings yet
Btechcse 2022 23 Latest New
200 pages
BTECH2022MECH
No ratings yet
BTECH2022MECH
154 pages
Engineering Mechanics by Shubham Singh U - 22 PDF
No ratings yet
Engineering Mechanics by Shubham Singh U - 22 PDF
31 pages
Academic Rules and Regulations R20
No ratings yet
Academic Rules and Regulations R20
36 pages
B.Tech (Mechanical Engineering) - NIU
No ratings yet
B.Tech (Mechanical Engineering) - NIU
133 pages
Btech 002 - 2024 25
No ratings yet
Btech 002 - 2024 25
218 pages
Anuj Maurya: Career Objective
No ratings yet
Anuj Maurya: Career Objective
2 pages
B.tech ER Curriculum 2023 & S1S2 Syllabus
No ratings yet
B.tech ER Curriculum 2023 & S1S2 Syllabus
139 pages
Syllabus
No ratings yet
Syllabus
258 pages
CV GULFAM (Safety Trainer)
No ratings yet
CV GULFAM (Safety Trainer)
3 pages
Final NEP Compliant B.tech - Robotics AI Engineering Complete Curriculum W.E.F. AY 2024 25 Jan 2025 1
No ratings yet
Final NEP Compliant B.tech - Robotics AI Engineering Complete Curriculum W.E.F. AY 2024 25 Jan 2025 1
92 pages
Syllabus Affiliated Eng B.tech - Electrical Electronics Enigneering 2023 2024 Revised 07122023
No ratings yet
Syllabus Affiliated Eng B.tech - Electrical Electronics Enigneering 2023 2024 Revised 07122023
251 pages
Alcoholism Chapter Xxxiii
No ratings yet
Alcoholism Chapter Xxxiii
13 pages
The Complete Project Management Exam Checklist: 500 Practical Questions & Answers for Exam Preparation and Professional Certification: 500 Practical Questions & Answers for Exam Preparation and Professional Certification
From Everand
The Complete Project Management Exam Checklist: 500 Practical Questions & Answers for Exam Preparation and Professional Certification: 500 Practical Questions & Answers for Exam Preparation and Professional Certification
Guan Leng Lim
No ratings yet
IT GR 20 I To IV Yr Final
No ratings yet
IT GR 20 I To IV Yr Final
199 pages
Third Quarter Examination in Science 9: Schools Division Office Caloocan City
No ratings yet
Third Quarter Examination in Science 9: Schools Division Office Caloocan City
5 pages
PDF 1568011837386 PDF
No ratings yet
PDF 1568011837386 PDF
13 pages
A Simple, Illustrated Introduction To Single Infusion Mash Temperatures
No ratings yet
A Simple, Illustrated Introduction To Single Infusion Mash Temperatures
5 pages
JNTUA - M.tech. - R21 - Academic - Regulations - Final
No ratings yet
JNTUA - M.tech. - R21 - Academic - Regulations - Final
15 pages
NEP Compliant S.Y. Robotics AI Syllabus W.E.F A.Y. 2024 25 1
No ratings yet
NEP Compliant S.Y. Robotics AI Syllabus W.E.F A.Y. 2024 25 1
30 pages
Registration Number: Please Read The Following Important Instructions Carefully
No ratings yet
Registration Number: Please Read The Following Important Instructions Carefully
3 pages
Princess Accessories For 18" Doll
No ratings yet
Princess Accessories For 18" Doll
5 pages
Syllabus - BTech - First - Yr - Common - Other - Than - AG - & - BT - Effective - From - 2022 - 23 Final
No ratings yet
Syllabus - BTech - First - Yr - Common - Other - Than - AG - & - BT - Effective - From - 2022 - 23 Final
43 pages
Sime Darby Plantation Is The Plantation and Agri
No ratings yet
Sime Darby Plantation Is The Plantation and Agri
1 page
Be Mechanical Engineering Second Year Se Semester 4 Rev 2019 C Scheme
No ratings yet
Be Mechanical Engineering Second Year Se Semester 4 Rev 2019 C Scheme
31 pages
Real Estate Economics in California
From Everand
Real Estate Economics in California
Michael Lustig
No ratings yet
Probor Datasheet
No ratings yet
Probor Datasheet
6 pages
Ultimate Series DVR Manual
No ratings yet
Ultimate Series DVR Manual
21 pages
Third - Year - Mechanical - (BE Sem-V and VI) - Teaching Scheme and Course Content - Mod - 31052022
No ratings yet
Third - Year - Mechanical - (BE Sem-V and VI) - Teaching Scheme and Course Content - Mod - 31052022
68 pages
ME Syllabus Sem Vii Mumbai University
No ratings yet
ME Syllabus Sem Vii Mumbai University
56 pages
R18 Cse
No ratings yet
R18 Cse
57 pages
CSE (DS) GR 20 I To IV Yr Final
No ratings yet
CSE (DS) GR 20 I To IV Yr Final
208 pages
UG Rules and Regulations R 20 2018 19
No ratings yet
UG Rules and Regulations R 20 2018 19
62 pages
READING
No ratings yet
READING
62 pages
Material Science Full Notes at Mohit Chouksey
No ratings yet
Material Science Full Notes at Mohit Chouksey
87 pages
M_o_R® Management of Risk Practitioner Courseware – English
From Everand
M_o_R® Management of Risk Practitioner Courseware – English
Douwe Brolsma
No ratings yet
Information Security Management Professional based on ISO/IEC 27001 Courseware revised Edition– English
From Everand
Information Security Management Professional based on ISO/IEC 27001 Courseware revised Edition– English
Ruben Zeegers
No ratings yet
P3O® Foundation Portfolio, Programme and Project Offices Courseware – English
From Everand
P3O® Foundation Portfolio, Programme and Project Offices Courseware – English
Henny Portman
No ratings yet
Manual ASRock P4i65GV
No ratings yet
Manual ASRock P4i65GV
36 pages
01 r22 Ce I Year Syllabus
No ratings yet
01 r22 Ce I Year Syllabus
100 pages
13 - Fluoros
No ratings yet
13 - Fluoros
30 pages
R22 Rules With Internship Guidelines 10-11-2022.
No ratings yet
R22 Rules With Internship Guidelines 10-11-2022.
33 pages
Mech r2016
No ratings yet
Mech r2016
172 pages
Cse (CSBS) Gr20 I To IV Year Final
No ratings yet
Cse (CSBS) Gr20 I To IV Year Final
212 pages
R18 Eee
No ratings yet
R18 Eee
57 pages
Sylabi
No ratings yet
Sylabi
32 pages
R2019 Final - Year - Mechanical - (BE Sem-VII and VIII) - Teaching Scheme and Course Content
No ratings yet
R2019 Final - Year - Mechanical - (BE Sem-VII and VIII) - Teaching Scheme and Course Content
106 pages
Electronic Computer Science Syllabus Sem VI Mumbai University PDF
No ratings yet
Electronic Computer Science Syllabus Sem VI Mumbai University PDF
46 pages
ANDA Impurities Guidance
No ratings yet
ANDA Impurities Guidance
11 pages
Mechanical Engineering Syllabus Sem V Mumbai University
No ratings yet
Mechanical Engineering Syllabus Sem V Mumbai University
38 pages
Syllabusbtechec11213 PDF
No ratings yet
Syllabusbtechec11213 PDF
103 pages
B.Tech EE 17 18 - V1 - 3
No ratings yet
B.Tech EE 17 18 - V1 - 3
139 pages
Mechanical Engineering Syllabus Sem III Mumbai University
No ratings yet
Mechanical Engineering Syllabus Sem III Mumbai University
54 pages
Third - Year - Mechanical - (BE Sem-V and VI) - Teaching Scheme and Course Content - Draft
No ratings yet
Third - Year - Mechanical - (BE Sem-V and VI) - Teaching Scheme and Course Content - Draft
68 pages
Eee. 14 15 PDF
No ratings yet
Eee. 14 15 PDF
108 pages
Uptu Syllabus
No ratings yet
Uptu Syllabus
74 pages
Eee. 15 16 PDF
No ratings yet
Eee. 15 16 PDF
112 pages
Civil Engineering
No ratings yet
Civil Engineering
95 pages
B.Tech MECH Syllabus Book (R15) PDF
No ratings yet
B.Tech MECH Syllabus Book (R15) PDF
153 pages
The Use of Screencasting in Higher Education: A Case Study
From Everand
The Use of Screencasting in Higher Education: A Case Study
Jetmir Abdija
No ratings yet
Final B. Tech R19 REGULATIONS-9-7-2020
No ratings yet
Final B. Tech R19 REGULATIONS-9-7-2020
16 pages
Preparing for Accreditation: Of Quality Assurance of Professional Educational Services
From Everand
Preparing for Accreditation: Of Quality Assurance of Professional Educational Services
Prof. Satish Kumar Soni
No ratings yet
B.tech R16 Regulations
No ratings yet
B.tech R16 Regulations
12 pages
B.Tech Civil Syllabus1
No ratings yet
B.Tech Civil Syllabus1
135 pages
Department of Civil Engineering: Page - 1
No ratings yet
Department of Civil Engineering: Page - 1
68 pages
Department of Computer Science and Engineering: Page - 1
No ratings yet
Department of Computer Science and Engineering: Page - 1
69 pages
Mechanical Engg 2 3 4 Year 2011-12
No ratings yet
Mechanical Engg 2 3 4 Year 2011-12
74 pages