Scribd
Upload
64 views

Digital Signal Processing 18

This document appears to be an exam paper for a Digital Signal Processing course. It contains two parts: Part A has 10 short answer questions covering topics like applications of DSP, properties of the z-transform and DFT, IIR filter design methods, FIR filter design using Kaiser's approach, and sources of noise in digital filters. Part B has 5 long answer questions, one from each unit of the course, covering topics such as realizing an LTI system using direct form structures, finding the frequency response of a system using its difference equation, properties of the DFT, designing high pass and band pass filters using bilinear transformation and windows, comparing FIR and IIR filters, and multirate signal processing concepts

Uploaded by

Patel Ibrahim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
64 views

Digital Signal Processing 18

This document appears to be an exam paper for a Digital Signal Processing course. It contains two parts: Part A has 10 short answer questions covering topics like applications of DSP, properties of the z-transform and DFT, IIR filter design methods, FIR filter design using Kaiser's approach, and sources of noise in digital filters. Part B has 5 long answer questions, one from each unit of the course, covering topics such as realizing an LTI system using direct form structures, finding the frequency response of a system using its difference equation, properties of the DFT, designing high pass and band pass filters using bilinear transformation and windows, comparing FIR and IIR filters, and multirate signal processing concepts

Uploaded by

Patel Ibrahim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Code No: A26E3 R 15

BVRAJU INSTITUTE OF TECHNOLOGY, NARSAPUR


(UGC - AUTONOMOUS)
B.Tech III Year II Semester Regular Examinations, April/May 2018
DIGITAL SIGNAL PROCESSING
(Elect ronics a nd Co mmun ication Engin eerin g)
Time: 3 Hours Max Marks: 70
Note: This Question Paper contains two Parts A and B
Part A is compulsory which carries 20 marks. Answer all questions in Part A at one place only.
Part B Consists of 10 questions. Answer any five (one full question from each unit). Each question carries10 marks and may
have a, b, c as sub questions.
PART – A (10x2 = 20 Marks)
1. a) What are the applications of digital signal processing?
b) Write any two properties of Z-Transform.
c) State and prove time shifting property of DFT.
d) Give the relation between z-transform and DFT.
e) What is mean by bilinear transformation method of designing IIR Filter?
f) What are the parameters that can be obtained from the Chebyshev filter specification?
g) Why the limit cycle problem does not exist when FIR digital filter is realized in direct form?
h) What are the features of FIR filter design using Kaiser’s approach?
i) Write a short note on round off noise.
j) Explain dead band effects.
PART – B (5x10 = 50 Marks)
2. a) Define an LTI System and show that the output of an LTI system is given by the convolution of
Input sequence and impulse response.
b) Realize the following system in direct form I.

OR
3. a) Obtain the parallel realization of the system described by the difference equation

b) Find the frequency response H(ejw) of the linear time-invariant system whose input and output
satisfy the difference equation

***
4. Define DFT and then state and prove properties of DFT.
OR
5. Find the DFT of a sequence x[n] = {1, 2, 3, 4, 4, 3, 2, 1} using:
a) DIT algorithm b) DIF algorithm
***
6. Using the bilinear transform, design a high pass filter, monotonic in password with cutoff frequency of 1000 Hz and
down 10 dB at 350 Hz. The sampling frequency is 5000 Hz.
OR
7. a) Obtain the impulse response of digital filter to correspond to an analog filter with impulse
response ha(t) = 0.5 e-2t and with a sampling rate of 1.0kHz using impulse invariant method.
b) Compare bilinear transformation and impulse invariant mapping.
***
8. a) Write down the Comparison between FIR and IIR digital filters
b) Compare Hamming and Hanning window Techniques.
OR
9. Design an ideal high pass filter with frequency response
Hd(ejw)={1 for Π/4 <= lwl <= Π
{ 0 for lwl <= Π/4
Using Hanning window n=7.
***
10. a) Define Multirate systems and Sampling rate conversion.
b) Discuss the sampling rate conversion by a factor I with the help of a neat block diagram.
OR
11. a) Explain interpolation process with an example.
b) What are the effects of finite word length in digital filters?
***

You might also like