0% found this document useful (0 votes)
209 views2 pages

NAS Standard

The document announces the adoption of NAS1924 "CLAMP HOSE" by the Department of Defense on May 14, 2008. It provides contact information for submitting proposed changes and obtaining additional documents. Tables I and II show cross-references between the superseding NAS1924 part numbers and the cancelled AN737 part numbers for different sizes of clamp hoses.

Uploaded by

tamaranm
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
209 views2 pages

NAS Standard

The document announces the adoption of NAS1924 "CLAMP HOSE" by the Department of Defense on May 14, 2008. It provides contact information for submitting proposed changes and obtaining additional documents. Tables I and II show cross-references between the superseding NAS1924 part numbers and the cancelled AN737 part numbers for different sizes of clamp hoses.

Uploaded by

tamaranm
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ADOPTION NOTICE

NAS1924, "CLAMP HOSE” was adopted on 14 May 2008 for use by the Department of Defense (DoD).
Proposed changes by DoD Activities must be submitted to the DoD Adopting Activity: DLA Land and
Maritime, Attn: VAI, 3990 East Broad Street, Columbus, OH 43218-3990 or [email protected]. (Copies of
these documents are available online at http://www.aia-aerospace.org or from the Aerospace Industries
Association, 1000 Wilson Boulevard, Suite 1700, Arlington, VA 22209-3901.)

NAS1924 Part or Identifying Number (PIN) should be used instead of the AN737. Cross reference PINs
are shown in tables I and II below.

CAUTION: The supersession information is valid as of the date of this notice and may be superseded by
subsequent revisions of the superseding document.

CONCLUDING MATERIAL

Custodians: Preparing activity:


Army – CR4 DLA - CC
Navy - YD
Air Force - 99 (Project 4730-2012-097)
DLA - CC

Review activities:
Army – AR,AV
Navy – AS,MC,SA
Air Force –71

NOTE: The activities listed above were interested in this document as of the date of this document.
Since organizations and responsibilities can change, you should verify the currency of the information
above using the ASSIST Online database at https://assist.dla.mil.

AMSC N/A FSC 4730


NAS1924

TABLE I. AN737 to NAS1924 for multiple size


clamp hose, supersession data. 1/ 2/ 3/ 4/

Replacement
AN737 PIN Replacement PIN
PIN Thumb screw
AN737RM22 AN737TM22 AN737TW22 NAS1924-22 NAS1924-TW22
AN737RM24 AN737TM24 AN737TW24 NAS1924-24 NAS1924-TW24
AN737RM26 AN737TM26 AN737TW26 NAS1924-26 NAS1924-TW26
AN737RM30 AN737TM30 AN737TW30 NAS1924-30 NAS1924-TW30
AN737RM34 AN737TM34 AN737TW34 NAS1924-34 NAS1924-TW34
AN737RM38 AN737TM38 AN737TW38 NAS1924-38 NAS1924-TW38
AN737RM44 AN737TM44 AN737TW44 NAS1924-44 NAS1924-TW44
AN737RM46 AN737TM46 AN737TW46 NAS1924-46 NAS1924-TW46
AN737RM48 AN737TM48 AN737TW48 NAS1924-48 NAS1924-TW48
AN737RM56 AN737TM56 AN737TW56 NAS1924-56 NAS1924-T5W6
AN737RM58 AN737TM58 AN737TW58 NAS1924-58 NAS1924-TW58
AN737RM66 AN737TM66 AN737TW66 NAS1924-66 NAS1924-TW66
AN737RM74 AN737TM74 AN737TW74 NAS1924-74 NAS1924-TW74
AN737RM82 AN737TM82 AN737TW82 NAS1924-82 NAS1924-TW82
AN737RM91 AN737TM91 AN737TW91 NAS1924-91 NAS1924-TW91
AN737RM98 AN737TM98 AN737TW98 NAS1924-98 NAS1924-TW98
AN737RM107 AN737TM107 AN737TW107 NAS1924-107 NAS1924-TW107
AN737RM114 AN737TM114 AN737TW114 NAS1924-114 NAS1924-TW114
1/ Code RM before dash number for Radial-Machine Screw-type clamp.
2/ Code TM before dash number for Tangential-Machine Screw-type clamp.
3/ Code TW before dash number for Tangential-Machine Thumb Worm-type clamp.
4/ Code TS before dash number for Tangential-Machine Screw Worm-type clamp. (If ever ordered)

TABLE II. AN737 to NAS1924 for inside diameter must open to


used with hose ID, supersession data. 1/ 2/

Cancelled . Minimum Used With Hose ID


AN737 PIN Inside Dia. Inside Non-Self Self-Sealing Replacement
Multiple sizes Must open To: Dia. Sealing Hose Hose NAS1924

AN737-TW26-30 15/16 9/16 3/8,1/2 NAS1924-TW26-30


AN737-TW34-38 1-3/16 13/16 5/8, 3/4 NAS1924-TW34-38
AN737-TW44-48 1-1/2 61/64 1 5/8, 3/4 NAS1924-TW44-48
AN737-TW56-66 2-1/16 1-21/64 1-1/4, 1-1/2 1, 1-1/4 NAS1924-TW56-66
AN737-TW74-91 2-27/32 1-7/8 1-3/4, 2 1-1/2, 2 NAS1924-TW74-91
AN737-TW98-114 3-9/16 2-5/8 2-1/4, 3 2-1/2 NAS1924-TW98-114

1/ Code TW before dash number for Tangential-Machine Thumb Worm-type clamp.


2/ Code TS before dash number for Tangential-Machine Screw Worm-type clamp. (If ever ordered)

You might also like