Mopar Restoration Catalogue

Part Number: P5153817
INTRODUCING
AUTHENTIC RESTORATION PRODUCTS FOR AUTHENTIC PERFORMANCE
From ignition and electronics products, to body
and wheel components, Mopar has you covered.
In this new Mopar Restoration Products Source
Book, you’ll find everything you need for that
classic 100-point Chrysler, Dodge or Plymouth
muscle car you’re striving for.
But Mopar’s Restoration Products Source Book

Mopar’s Restoration is more than just parts—it’s your complete
Products Source Book Is authoritative reference for everything you need
Your Project Authority. to know about your vehicle and your restoration
project. Licensee listings will help you go
If you’re restoring a classic Chrysler, Dodge or directly to the source for hard-to-find parts,
Plymouth muscle car, it’s time to kick it into high gear and Vehicle Identification Number (VIN)
with authentic restoration products from Mopar. decoding information will let you discover
many things about your vehicle.
Why settle for second best when you can get THE
best for your restoration project. Consider that all Your restoration project is serious business.
Mopar restoration products are manufactured Mopar restoration products are serious products.
using original tooling and/or blueprints, and you’ll You’re good to go with authentic restoration
quickly discover that Mopar restoration products products from Mopar. You’ll find it all here, in
are the real deal—not hopeful wannabes. Mopar’s new Restoration Products Source Book.
MOPAR PERFORMANCE WARRANTY
NOTICE EMISSIONS STATEMENT

Federal and many state laws prohibit the removal, modification Federal law requires emissions parts on new vehicles to be
or rendering inoperative of any part or element of design warranted for at least two years or 24,000 miles, whichever
affecting emissions or safety on motor vehicles used for comes first. Federal and many state laws also prohibit the
transporting persons or property on a public street or highway. removal, modification or rendering inoperative any part that
Violation may result in a fine of up to $27,500 per vehicle. affects emissions or safety on motor vehicles used on public
Mechanical and/or electronic performance parts listed in this streets or highways.
catalog cannot be used on vehicles used on public streets
or highways. These parts may be used only on vehicles used Many Mopar Performance parts are designated for track use or
solely in sanctioned off-highway events. No other applications off-road use only. Installation of certain components may bring
are intended or implied. Those parts that have been granted the vehicle out of compliance with safety and/or emissions
an exemption by the California Air Resources Board (CARB) or standards. Mopar recommends that vehicles with parts
meet the EPA requirements of memorandum 1A are legal for designated in this fashion not be operated on public roads.
highway use in California, New York and Massachusetts and Mopar Performance customers are responsible for complying
are noted as such. with applicable state and local environmental regulations.
NO PARTS WARRANTY – “AS IS” Additionally, certain performance parts may affect the
Mopar Performance parts beginning with a “P” prefix are sold emissions characteristics of the vehicle. If you install them
“as is” unless otherwise noted. This means that parts sold on the vehicle, and your vehicle consequently fails a required
by Mopar Performance carry no warranty whatsoever. Implied state or local I/M (inspection and maintenance) emissions test,
warranties, such as warranties of merchantability, are excluded. including any test required to maintain or renew your vehicle’s
(An implied warranty of merchantability means that the part is registration, or if your vehicle is subject to an emissions recall,
reasonably fit for the general purpose for which it was sold). DaimlerChrysler may not be required to repair your vehicle
The entire risk as to quality and performance of such parts is under the emissions performance warranty, and you may be
with the buyer. Should such parts prove defective following required to remove those parts at your own expense in order
their purchase, the buyer and not the manufacturer, distributor to obtain repairs necessary to pass the I/M test or to perform
or retailer, assumes the entire cost of all necessary servicing or the recall.
repair. Dodge, Chrysler and Jeep® vehicle and parts warranties
are voided if the vehicle or parts are used for competition. NOTE — CALIFORNIA ONLY
The addition of performance parts does not by itself void a The emissions laws and regulations of the state of California
vehicle’s warranty. However, added performance parts (parts apply to all non-racing vehicles operated in California.
not originally supplied on the vehicle from the factory) are Consequently, those parts marked in this catalog with an
not covered by the vehicle’s warranty, and any failure that asterisk and appropriately marked on their packaging may
they may cause is also not covered by the vehicle’s warranty. legally be used in California only on a racing vehicle that
will never be operated on public roads.
MOPAR PERFORMANCE CRATE ENGINE
90-DAY LIMITED WARRANTY PARTS ORDERING AND INQUIRIES
Mopar Performance Crate Engine Assemblies not used in The parts in this catalog may be ordered from authorized
competition are warranted for “parts only,” AS DELIVERED Chrysler, Jeep and Dodge dealerships or the speed shops
against defects in materials or workmanship for 90 days from carrying the Mopar Performance line of products. When a
the date of purchase. The following parts, if defective, will be part ordered has been superseded, the replacing part will
replaced on an exchange basis for 90 days: cylinder blocks and be shipped automatically. The price of the replacing part
all internal parts; cylinder head assemblies; intake manifold; may differ from the ordered part.
core plugs, valve covers; oil pan; timing gear; water pump;
gaskets and seals. See your dealer for a copy of the warranty,
which contains additional terms and limitations.
All product illustrations and specifications are based upon current information at the time of publication approval. Although descriptions are believed correct,
complete accuracy cannot be guaranteed. DaimlerChrysler reserves the right to make changes at any time, without notice or obligation, to the information contained
on this printed document, including and without limitation to prices, specifications, equipment, colors, materials, and to change or discontinue products.
4
TABLE OF CONTENTS
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Small Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Engine Blocks and Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Warranty and Special Notices . . . . . . . . . . . . . . . . . . . . . . 4 Crankshafts and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Vibration Dampers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Roller Timing Chain and Sprockets . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Camshafts and Lifters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Hemi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Cylinder Heads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Engine Block Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Cylinder Head gaskets And hardware . . . . . . . . . . . . . . . . . . . . . . . 55
Crankshafts and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Valve Covers and Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Pistons and Connecting Rods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Rocker Shafts, Supports and Hardware . . . . . . . . . . . . . . . . . . . . . . 62
Camshafts and Lifters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Intake Manifolds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Cylinder Heads, Gaskets and Hardware . . . . . . . . . . . . . . . . . . . . . . 15 Intake Manifold Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Valve Covers and Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Fuel Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Rocker Shafts, Supports and Hardware . . . . . . . . . . . . . . . . . . . . . . 20 Oiling Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Intake Manifolds and Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Cooling Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Carburetors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Oiling Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Fuel System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Cooling Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Carburetors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Carburetor Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Big Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Six Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Engine Block Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Mechanical Fuel Pumps and Hardware . . . . . . . . . . . . . . . . . . . . . . 75
Crankshafts and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Electric Fuel Pumps and Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Roller Timing Chain and Sprockets . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Air Intake Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Camshafts and Lifters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Pushrods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Continued on page 6
Valves and Valve Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Rocker Shafts, Supports and Hardware . . . . . . . . . . . . . . . . . . . . . . 40
Oiling Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Cooling Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
For more information on the parts listed in this

catalog, please visit www.mopar.com or contact
us directly via the Mopar Direct Connection
hot line at 1(888) 528 HEMI (4364).
5
VEHICLE
TABLE OFIDENTIFICATION
CONTENTS
Ignition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Body and Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Distributors and Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 Body and Wheels — Exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Electronic Ignition Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 Body Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Ballast Resistors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Wheel Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Ignition Wires and Spark Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Nameplates and Emblems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Ignition Coils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Underhood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Voltage Regulators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Body and Wheels — Interior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Automatic Transmission. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Books . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127

Shift Improvement Packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Automatic Transmission Components . . . . . . . . . . . . . . . . . . . . . . . 88 Licensee Listing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Drive Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Transmission Overhaul Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Vehicle Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
RWD Transmission Pan Gasket and Hardware. . . . . . . . . . . . . . . . . 89 Dodge and Plymouth VIN Identification . . . . . . . . . . . . . . . . . . . . . 136
Torque Converters and Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 Dodge and Plymouth VIN Identification . . . . . . . . . . . . . . . . . . . . . 137
Transmission Coolers and Pans . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 Chrysler Fender Tags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
Transmission Clutches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Chrysler Fender Tags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Identifying Chrysler Body Series . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Manual Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 Engine component casting numbers . . . . . . . . . . . . . . . . . . . . . . . . 142
Flywheels and Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Clutch Linkage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Clutch Discs, Pressure Plates and Hardware . . . . . . . . . . . . . . . . . . 97
Shifters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 The Walter P. Chrysler Museum . . . . . . . . . . . . . . . . . . . 154
Manual Transmission Components. . . . . . . . . . . . . . . . . . . . . . . . . . 98
Rear Axle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Universal Joint and Yoke Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Rear Axle Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Drivetrain and Rear Axle Components . . . . . . . . . . . . . . . . . . . . . . 104
Differential Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Steering/Suspension/Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Leaf Springs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Leaf Spring Attachment Hardware . . . . . . . . . . . . . . . . . . . . . . . . . 108
Torsion Bars and Hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Front Suspension Ball Joint and Hardware . . . . . . . . .110
Manual Steering Hardware . . . . . . . . . . . . . . . . . . . . .110
Shocks and Struts . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
Master Cylinder Components . . . . . . . . . . . . . . . . . . . .111
Brake Pushrods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112
Brake Proportioning Valve . . . . . . . . . . . . . . . . . . . . . . .112
6 *Not legal for sale on pollution-controlled vehicles or vehicles registered for highway use.
HEMI
7
HEMI: AN ENGINE
FOR THE AGES
HEMI. It’s not just the name of an can look as good as it did during the
engine; it represents a lifestyle and heyday of the Muscle Car era—and
attitude. It commands respect on the perform even better. Whether it just
street and is coveted by enthusiasts needs a cosmetic facelift or a complete
and collectors all over the world. With overhaul, Mopar can restore your Hemi
Mopar restoration parts, your Hemi to its full glory.
8
9
HEMI® ENGINES
A. 426 Hemi Crate Engine — 465 Horsepower
Replace your rare numbers-matching original Hemi with the
426 Hemi Crate Engine. Here’s classic power to move you!
This Hemi crate engine puts 465 horsepower and 486 ft.-lbs.
of torque under your right foot. For maximum performance,
Mopar recommends the use of a 750 cfm Holley Carburetor
(P4349228 — available through Mopar) and 2.00" Exhaust
Headers (not available through Mopar).
Specifications:
• Built with all-new components
• Heavy-duty Cast Iron Block with Cross-Bolted Mains
• Cast Iron Cylinder Heads
• Chrome Valve Covers
• Breathers
• Stainless Steel 2.25" Intake Valves and 1.94" Exhaust Valves
• Heavy-Duty Single Valve Springs with Dampers
• Premium Material Umbrella-Type Valve Stem Seals
• 278° Hydraulic Camshaft — 0.495"/0.480" lift
• Forged Pistons — 4.250" bore, 9.0:1 compression ratio*
• Aluminum Dual-Plane M1® 4-bbl Intake Manifold
• Forged Steel Crankshaft — 3.750" stroke
• Premium Double Roller Timing Chain and Sprockets
• Front Timing Chain Cover
• 6-Quart Rear Sump Oil Pan (1970–71 B- and E-Body style)
• Spark Plug Wires
• High-Performance Electronic Distributor
• Heavy-Duty Engine Stand and Shipping Crate
*9.0:1 compression ratio allows the use of current high-octane

premium pump gasoline. Crate engines that change the
A.
emissions performance of the vehicle may not be legal for
use on vehicles regulated for highway use in California and
other states. Horsepower and torque rating based on test
engine. Ratings may vary on individual engines.
*P5249667AC 426 Hemi Crate Engine —

465 Horsepower, 486 ft.-lbs. Torque
B. Cast Iron Hemi Blocks

We’ve made the best even better! Mopar Performance Hemi
engine blocks have undergone revised, updated tooling. They
are machined to closer tolerances than ever and feature
increased material in the thrust area.
Just check out the features:
• 100% CNC machined for accuracy and quality
• Brand-new castings made from high nickel alloy cast iron
• Thicker deck surface for improved rigidity and gasket sealing
• Ductile iron main caps, which are cross-bolted on the three
center caps on all the blocks
• Stock 10.72" deck height allows for installation of all
standard components
• Machined to accept all standard production pieces
such as heads, manifolds, water pumps, tappets, cams
and distributors
• Machined and cast in various configurations to meet
your specific requirements.
426 Hemi Cast Iron Street Blocks

Maintains the original 4.25" bore size while maintaining
water flow between the cylinders (non-siamesed) for the
purpose of improved cooling and sealing durability. As an
added feature, if you want to drop in a Hemi where a Big
Block used to be, you can select the block that has ears
cast and drilled on the sides to accommodate the Big Block B.
engine mounts (P5007669AB).
*P5007667AB 426 Hemi Cast Iron Street Block —

Rough Bored at 4.19"
*P5007668AB 426 Hemi Cast Iron Street Block —
Finish Bored at 4.25"
HEMI® ENGINES
ENGINE BLOCK COMPONENTS
A. Rear Main Bearing Seal Retainer Kit
Rear Main Bearing Seal Retainer Kit contains engine rear
main seal retainer, retainer bolts and seal package.
P4529732 Rear Main Bearing Seal Retainer Kit

(Hemi, Big Block)
B. Oil Seal Package
Oil Seal Package includes crank seals and installation tool.
P4271961 Oil Seal Package (Hemi, Big Block)
A. C. Block Hardware Package

This Block Hardware Package includes all necessary dowels,
plugs, bushings and keys, as well as core plugs, rear cam
bearing plug, drive gear bushing and head dowels.
P5249259 Block Hardware Package (Hemi, Big Block)
D. Engine Teardown Gasket Set

Engine Teardown Gasket Set includes all gaskets needed
for complete Hemi engine teardown. Includes oil pan,
cylinder head, valve cover, timing chain case cover, intake
manifold and oil pump gaskets.
P3412083 Engine Teardown Gasket Set

(426 Hemi, 1966 and later)
E. Core Plugs
B. C. These round, press-in engine Core Plugs fit standard or
Mopar race cast iron blocks.
P5249708 Brass Core Plugs (426 Hemi and Big Block)
F. Classic Hemi Engine Installation Components

Mopar offers these much needed parts to make your
426-based original production or crate Hemi engine
installation easier. Each part sold individually.
P4510281 Crank Pulley — Power Steering

P4510286 Crank Pulley — without Power Steering
P4510282 Water Pump Pulley Hemi
P4510283 Crank Pulley Spacer
P4510284 Oil Dipstick and Tube
P4510285 Coil Bracket
P4510287 Engine Mount Bracket — Two Required
D. E. for Hemi Crate Engine Installation
P4510288 LH Insulator
P4510289 RH Insulator
F.
11
HEMI® ENGINES
CRANKSHAFTS AND ACCESSORIES
A. Forged Crankshafts — Machined
High-strength, high-quality forged crankshafts machined
from 4340 steel. For high-performance race applications.
Eight-bolt flange.
*P5007251 Forged Race Crankshaft — 3.75" Stroke,

Full Radius, 8-Bolt, Balanced (426 Hemi,
Wedge, “RB”)
B. Crank Key Package

Crank Key Package locates crank sprocket on the nose of the
crank. Contains two keys. A.
P5249822 Crank Key Package (426 Hemi, Big Block)
C. Crank Bolt Packages BIG BLOCK ENGINE DISPLACEMENT (CUBIC INCHES)

These Crank Bolt Packages are used to attach the damper to
Stroke
the crankshaft. Bore 3.75" 4.50"
4.15"
P5249557AB Crank Bolt Package — 2.25" Length 4.25" 426 472 511
(Big Block, Aftermarket Dampers) 4.31" 438 485 525
P5249562 Thin Damper Crank Bolt Package —
1.25" Length (With E.O. Dumpers) 4.32" 440 487 528
4.38" 452 500 542
D. Steel Vibration Damper 4.50" 477 528 573
This Steel Vibration Damper features a steel ring and a
universal 6-bolt front pulley mount pattern. SFI approved. 4.53" 484 535 580
4.56" 490 542 588
P5249699 Steel Vibration Damper (1966–71 426 Hemi)
E. Thin Crank Vibration Damper

The Thin Crank Vibration Damper is designed for forged
cranks and used primarily in Big Block and Hemi engines.
Features 90° index markings and a symmetrical 6-bolt
pattern for pulley attachment. On pre-1972 engines with
stock pulleys, minor modifications will be needed to attach
bottom pulley. Not SFI approved. Must use 383/440 engine
pulleys (not available through Mopar).
P3830183 Thin Crank Vibration Damper

(Hemi, Big Block)
B. C.
D. E.
HEMI® ENGINES
A. Damper Degree Timing Tape
Improve timing accuracy with Damper Degree Timing Tape.
Marked in 90° increments. Self-adhesive strip adheres to
crank vibration damper for clear identification of marks.
Permits initial total spark advance up to 60° instead of only
10°–15° as on chain case timing tab.
P4529070AB Damper Degree Timing Tape
B. Oil Slinger
This Oil Slinger protects front seal from excessive oil contact.
Forces lubricant oil into chain.
A. B. P5249636 Oil Slinger (Hemi, Big Block)
C. Double Roller Chain and Sprocket Sets

High-strength Double Roller Chain and Sprocket Sets provide
added durability and decreased rotational friction versus the
production silent chains. Three machined keyways in crank
sprocket adjust the cam timing. Kits includes Magna-Fluxed
Sprockets and Roller Timing Chain.
*P4452815 All-Out Race Chain and Sprockets —

3-Bolt Mount, Standard Size (Hemi,
Big Block)
P5249269 Double Roller Chain and Sprockets —
3-Bolt Mount (Hemi, Big Block)
D. Chrome-Plated Front Timing Chain Cover

Chrome-Plated Front Timing Chain Cover includes cover,
C. seal and gasket.
P4349816 Chrome-Plated Front Timing Chain Cover

(Hemi, Big Block)
E. Chrome Bolt Package for Front Timing Cover

Engine chrome dress-up projects are incomplete without
chrome bolts.
P4452795 Chrome Bolt Package for Front Timing

Cover (Hemi, Big Block)
F. Front Cover Seal and Gasket
P4876280 Front Cover Seal (Hemi, Big Block)

P4876769 Front Cover Gasket (Hemi, Big Block)
D.
E. F.
*Not legal for sale on pollution-controlled vehicles or vehicles registered for highway use. 13
HEMI® ENGINES
PISTONS AND CONNECTING RODS
A. Forged Steel Connecting Rod
This durable connecting rod is forged from 4340 super high-
strength steel as a single piece. Includes high-strength bolts.
P5249898 Forged Steel Connecting Rod —

Floating Pin, 6.86" Center-to-Center;
Sold Individually (426 Hemi)
B. OE Factory Camshafts
Mopar offers two original Street Hemi camshafts. The
mechanical version is based on the 1968–69 grind. It’s also
and excellent upgrade for 1966–67 Street Hemi applications. A.
The hydraulic version is an exact replacement for all 1970–71
Street Hemi vehicles.
*P4529315 Hydraulic Camshaft (1970–71 Street Hemi)

*P4529316 Mechanical Camshaft (1968–69 Street Hemi—
can be used on 1966–67 Street Hemi
applications)
B.
STREET HEMI ® REPLACEMENT CAMSHAFTS

Advertised Recom. Valve Applications &
Part Number @ 0.050 O-Lap Center Line Lift Tappets
Duration Spring Lash Comments
*P4529315 284/284 241/241 72 106 0.484/0.475 P3690933 — Y 1970–71 hydraulic
P4529316 284/284 241/241 72 106 0.484/0.475 P3690933 28/32 Y 1968–69 mechanical
Valve lash is listed in thousandths. For example, .028» lash settings are “cold.”
C. Camshaft Bearings
Complete engine set of Camshaft Bearings
P5249711 Camshaft Bearings —

Babbitt Applications (426 Hemi)
Camshaft Sprocket Bolts (Not Pictured)

P5007801 Camshaft Sprocket Bolt Kit —
for 3-Bolt Mounting, Includes Three
Bolts (426 Hemi, Big Block)
C.
HEMI® ENGINES
CAMSHAFTS AND LIFTERS
A. Pushrods
Engineered to be installed in your Hemi engine rebuilding
project. These 3/8" diameter pushrods are sold as complete
engine sets or individually for service.
P4529561 Hydraulic Pushrods — 10.47" Intake,

11.45" Exhaust, Set of 16
P4529547 Hydraulic Pushrod — 10.47" Intake,
Sold Individually
P4529548 Hydraulic Pushrod — 11.45" Exhaust,
Sold Individually
A.
CYLINDER HEADS, GASKETS

AND HARDWARE
B. Aluminum Cylinder Heads
Hemi Aluminum Cylinder Heads are interchangeable with
the production cast iron heads and offer a weight reduction
of 50 lbs. per engine set. Each features a single plug per
cylinder (capability for dual), a common 2.25" intake and
1.94" exhaust valve machining, and a 170 cc combustion
chamber. Includes valve seats and guide inserts. Assembly
includes valves, springs, retainers and keepers.
*P4876857 Aluminum Cylinder Head Assembly

(528 Hemi Crate Engine)
B. *P4529336 Aluminum Bare Machined Head (426 Hemi)
C. Cast Iron Cylinder Heads

Hemi Cast Iron Cylinder Heads are designed for more power.
Stiffer and stronger than original, increased material permits
porting for improved airflow. They feature the same outward
appearance as the original 1966–1971 heads, except for
shape of alternator boss. All components attach the same
as original (intake, exhaust, valve guides, seats, rocker gear,
etc.). Features 170 cc combustion chamber and 2.25" Intake
and 1.94" Exhaust valve machining.
*P4876855 Cast Iron Cylinder Head Assembly

(426 Hemi Crate Engine)
*P4529898 Cast Iron Bare Machined Head (426 Hemi)
C. D. Cast Iron Head Steel Shim Gaskets

These Cylinder Head Shim Gaskets are sold in pairs.
P4120247 Cast Iron Cylinder Head Steel Shim Gaskets—

0.020" Compression Thickness
D.
HEMI® ENGINES
A. Composition Material Cylinder Head Gaskets
Hemi Composition Material Cylinder Head Gaskets can be
used for replacement or competition applications up to 12.5:1
compression ratio. These premium high-quality head gaskets
offer maximum sealing for standard and high-compression
(12.5:1) Hemi engines. They have thickness of 0.040" to
0.042" and are sold in pairs.
P4529456 Composition Material Cylinder Head

Gaskets — 4.250"–4.310" Bore
Gaskets — 4.380"–4.500" Bore
B. Cylinder Head Hardware Kit A.

Cylinder Head Hardware Kit contains four head freeze plugs
and 10 dowel pins for the rocker shaft stands.
P5249570 Cylinder Head Hardware Kit
C. Cylinder Head Bolt Set

Cylinder Head Bolt Set includes head bolts and washers for
one cylinder head.
P4529978 Cylinder Head Bolt Set
D. Hardened Washer Sets

Hardened Washer Sets for use with head bolts and main
caps. They are sold in sets of 20.
P4120456 Hardened Washer Set — 3/8" (Big Block)

P4120459 Hardened Washer Set — 1/2" (Big Block) B. C.
VALVE COVERS AND HARDWARE

E. High-Performance PCV Valve
For you V8 owners with four-barrel carburetors, Mopar now
offers high-performance PCV valves. They look just like the
originals, but feature a free-flow design to help performance
V8s breathe easier. Sold individually.
P4343581 High-Performance PCV Valve

(V8 Four-Barrel)
F. Black Wrinkle Cast Aluminum Valve Cover Set

Dress up your 426 Hemi with this handsome Black Wrinkle
Cast Aluminum Hemi Valve Cover Set. Painted black wrinkle D. E.
and finned with Hemi logo cast in. For single-plug cylinder
head applications. Uses Street Hemi valve cover rail.
Gaskets included.
P5007796 Black Wrinkle Cast Aluminum Valve Cover

Set (1966 and later Street Hemi)
F.
16
HEMI® ENGINES
A. Chrome Valve Cover Set
Dress up your Hemi engine compartment with this Chrome
Valve Cover Set. Set features quality chrome plating and
includes two valve covers and gaskets.
P4529338 Chrome Valve Cover Set (426 Hemi)

P4120353 Replacement Valve Cover Gaskets —
Rubber Reinforced Cork, Two Per Set
(1966 and later Street Hemi)
B. Stamped Steel O.E. Black Wrinkle

Valve Cover Sets
Mopar takes another giant step to help the restoration crowd
A. with these O.E. Black Wrinkle 426 Hemi Valve Cover Sets.
Original equipment for all 1966–1971, 426 Hemi engines,
these stamped steel black wrinkle covers have the spark plug
wire brackets and rubber coated alternator wiring looms. Sets
include left and right valve covers, gaskets and hold-down
studs and nuts. P4529399 also includes chrome breather cap,
metal PCV valve and chrome PCV cap. P4510577 also includes
chrome oil fill cap and grommets for PCV and breather.
P4510577 Black Wrinkle Valve Cover Set —

Original Equipment (1970–71 426 Hemi)
P4529339 Black Wrinkle Valve Cover Set —
Original Equipment (1966–69 426 Hemi)
P4120353 Replacement Valve Cover Gaskets —
Rubber Reinforced Cork, Two Per Set
(1966 and later Street Hemi)
B. C. Service Parts for Cast Aluminum Valve Covers

These parts will come in handy when servicing Mopar Cast
Aluminum Valve Covers.
P5007499 Breather — Bolt-On, Pictured

(Valve Cover P5007796)
P5249947 Stud and Nut Kit — Long
P5249949 Oil Filter Cap — Screw-In
D. Valve Cover Stud and Nut Package

This Valve Cover Stud and Nut Package contains 20 studs
and 20 nuts, and will allow you to retain factory valve
covers. For use with all stamped (sheet metal) covers.
P4529897 Valve Cover Stud and Nut Package

(1966–71, 426 Hemi)
C. D. E. Chrome Breather Cap

Chrome Breather Cap for use with stamped steel
Hemi Black Wrinkle and Chrome Valve Covers (P4529338,
P4510577, P4529339).
*P4529896 Push-In Style Breather Cap

(1964–69, 426 Hemi)
F. PCV Package
Use this original equipment 426 Hemi PCV Package for
restoration or repair of Hemi valve covers. This factory reissue
kit contains one PCV valve cap, a PCV valve and nut, and one
PCV valve retaining spring. Push-on style PCV valve cap is
chrome and fits 1964–1969 Hemi valve covers, including
Mopar chrome or Black Wrinkle Valve Cover kits. Also can be
used to service non-Hemi ’60s era push-on style PCV valves.
E. F. *P4529895 PCV Package (1964–69 426 Hemi)
HEMI® ENGINES
A. Valves
These stainless valves for your 426 Hemi engine have
swirl-polished underheads that have no flat or ski jump
areas. They feature a 5/16" stem diameter and one square
groove. For use with cast iron and aluminum cylinder heads.
*P5249203 Intake Valve — 2.25" Diameter,

5.40" Stem Length (426 Hemi)
*P5249204 Exhaust Valve — 1.94" Diameter,
4.86" Stem Length (426 Hemi)
B. Valve Seals
Made of high-temp Viton material, these Valve Seals feature
a full or semi-umbrella shape for best dual-purpose use. Helps A.
prevent oil seepage down valve guides. Not recommended for
use with dual valve springs. Sold in sets of 16.
P5249661 Valve Seals — 5/16" Stem Size,

0.530" Guide (426 Hemi, 5.2L/5.9L
Truck Magnum/Jeep Engines)
C. Valve Stem Lash Caps

These lash caps are 0.080" thick and fit between the end of
the valve and the rocker arm tip. They are made of hardened
steel for improved rocker tip durability. Larger area than stock
valve tip to help spread the rocker loads. Sold in sets of 16.
*P4120626 Valve Stem Lash Caps — 3/8" Stem

(426 Hemi, Big Block, Small Block,
*P4120635 Valve Stem Lash Caps — 5/16" Stem B. C.
D. Valve Guides
These silicon-bronze alloy Valve Guides are designed for
aluminum heads. They must be pressed into the head once
it is prepped. To replace guides in aluminum heads requires
removal of the old guide and some prep to resize the guide
holes. Guide I.D. must be sized for the valve stem once
pressed into the head. Guides can be used to modify, rebuild
or repair aluminum heads. Sold individually.
P4876709 Valve Guide — 5/16" Valve Stem, Intake

P4876710 Valve Guide — 5/16" Valve Stem, Exhaust
E. Valve Keepers
These single groove style Hemi Valve Keepers are made from D. E.
hardened material. They feature a 5/16" stem diameter and
can be used for restoration or performance applications. Sold
as cylinder head sets of 16 pieces (note that two sets are
required for all V8 engines).
P4120634 Valve Keepers

P4529038 Valve Keepers VALVE KEEPERS
Part Valve Stem
Number Angle Diameter Groove Retainers Sets
P4452769, P4529288,
P4120634 8° 5/16" Single-Square 16 Pieces
Stock
P4529038 10° 5/16" Single-Square P4120785, P4286775 16 Pieces
HEMI® ENGINES
A. Valve Springs
High-pressure Valve Springs can be used on exhaust and
intake valves for all high-performance applications. They
feature a shorter fully compressed height and allow for
increased valve lift. Springs maintain spring load at higher
rpms. A must for high-performance cams. Sold individually.
Refer to chart for spring specifications.
P4286812 Valve Spring

A. P4876064 Valve Spring
Note: With a single spring, the damper is installed inside the

VALVE SPRINGS main spring. With a dual spring, the damper is installed between
the inner and outer springs. There are no
Wire dampers in the triple springs. The retainers listed are
Part Number Installed Ht. Description OD Lift Range Material Retainers
Dia. the basic recommendation. Check the actual retainer
listing for other options.
Chrome
P4286812 1.83"/1.86" Single/damper 1.49" 0.208" 0.430"/0.460" P4452033
vandium
P4452769,
Chrome
P3690933 1.83"/1.86" Single/damper 1.53" 0.224" 0.440"/0.500" P4529288,
vandium P5007858
Chrome P4452769,
P5249848 1.86"/1.87" Single/damper 1.55" 0.216" 0.480"/0.540" silicon P4289288
Chrome P4529288,
P2806077 1.83"/1.86" Dual/damper 1.52" 0.215" 0.500"/0.610" vandium P4120785
Chrome P4529288,
P4876064 1.86"/1.88" Dual/damper 1.60" 0.216" 0.590"/0.640" silicon P4120785
Chrome
P5249849 2.00"/2.02" Dual/damper 1.55" 0.216" 0.650"/0.750" P4120785
silicon
Chrome
P4007536 2.00"/2.02" Triple 1.62" 0.225" 0.640"/0.745" P4286775
silicon
1. All valve springs are sold individually.
2. On W7 heads and others with x-long valves, like the 5.40" length, the typical installed spring height is 2.00"
so only the springs listed above for the 1.99" thru 2.02" installed heights can be used.
3. With a single spring, the damper is installed inside the main spring; with a dual spring, the damper is
installed between the inner and outer springs. There is no damper in the triple springs.
4. Retainers — the ones listed are the basic recommendation. Check the actual retainer listing for other
options-added installed height, materials, lock size.
19
HEMI® ENGINES
A. Valve Spring Retainers
These Valve Spring Retainers for Hemi engines are available
in three levels of performance: steel for restoration, chrome
moly for heavy-duty applications and titanium for top-level
race performance. Sold individually.
*P4452769 Steel Valve Spring Retainer

*P4529288 Chrome Moly Valve Spring Retainer
*P4120785 Titanium Valve Spring Retainer (426 Hemi,
Big Block, Small Block, Slant Six, 3.9L V6)
*P4286775 Titanium Valve Spring Retainer (426 Hemi,
Big Block, Small Block)
A.
ROCKER SHAFTS, SUPPORTS
AND HARDWARE
B. Rocker Shafts VALVE SPRING RETAINERS
These chrome Rocker Shafts are for use with mechanical
valve gear. They are sold individually. Part Number Material Locks Valve Stem Valve Spring Installed Height
P5249631 Rocker Shaft — Intake, On-Center *P4286775 Titanium 10° 5/16" Triple 0.060" Increase
P5249632 Rocker Shaft — Exhaust, On-Center
*P4120785 Titanium 10° 5/16" Dual Standard
C. Rocker Shaft Supports
*P4529288 Chrome Moly 8° 5/16" Single/Dual Standard
Blue anodized, extruded aluminum Rocker Shaft Supports
for 426 Hemi. Complete engine set includes 10 pieces *P4452769 Steel 8° 5/16" Single Standard
plus hardware.
P5249505 Rocker Shaft Supports
D. Rocker Shaft End Plugs

Rocker Shaft End Plugs are sold as a set of four.
They do not fit aftermarket rocker shafts.
P5249633 Rocker Shaft End Plugs

(426 Hemi and Big Block)
E. Rocker Shaft Springs

Rocker Shaft Springs for use on all production-based
Hemi valve gear. Used to locate rockers on the shaft.
Includes 14 long springs and two short springs.
Package contains one engine set.
P4452827 Rocker Shaft Springs (426 Hemi)
B. C.
D. E.
20
HEMI® ENGINES
A. Mechanical Rocker Arms
These Rocker Arms are made of SAE 1041 forged steel. They
feature hardened valve tip pads to help prevent scuffing and
internal bushings. Can serve as a replacement for original
production rockers. Fits both cast iron and aluminum heads.
Sold individually.
*P4529705 Mechanical Rocker Arm Package —

Production Ratio, Intake
Production Ratio, Exhaust
1.7 Ratio, Exhaust
A. B. *P4529708 Mechanical Rocker Arm Package —
1.65 Ratio, Exhaust
Note: High-ratio rockers may require grinding on block and
head for push rod clearance.
B. Rocker Arm Adjusting Screw and Nut Set

Rocker Arm Adjusting Screw and Nut Set includes
eight screws and nuts. Note that two sets are required
for V8 engines.
P5007444AB Rocker Arm Screw and Nut Set (Hemi,

Big Block)
INTAKE MANIFOLDS AND HARDWARE

C. NEW! 1966-71 Street Hemi Intake Manifold
Back by popular demand, the original 1966-71 Street
C. D. Hemi in-line Dual Quad Manifold uses original Carter AFB
carburetors and maintains production mounted bosses for
throttle return brackets. Has same factory casting numbers
and Pentastar as the original.
P5153737 Street Hemi Intake Manifold in-line

dual quad manifold
Note: Manifold comes unpainted.
D. Dual Quad Intake — 8-bbl

This new aluminum in-line Dual Quad Hemi Intake Manifold
is based on the marine/NASCAR version and is built from
the original tooling! Machined to accept aftermarket AFB
Carburetors or Holley Carburetors (P4452778 rear, P4452779
front), this manifold will fit production 426 Hemi heads
and has provisions for manifold heat and power brakes. It
retains the same stock height as the production 1966–71
E. F. Street Hemi AFB Intake Manifold. Production AFB air cleaner
baseplate/lid will need to be changed or modified. Some
O.E and aftermarket linkage components and fuel lines are
needed to complete the installation.
*P4510633 Aluminum Dual Quad Intake —

426 HEMI INTAKE MANIFOLD APPLICATION CHART Dual 4-bbl Carbs (426 Hemi)
Engine Cyl. Head Perf. Level Carburetion Resto Drag Street
E. Cross Ram Intake — 8-bbl
426 Hemi All All 8-bbl Inline Stock Stock Stock This aluminum Cross Ram Intake Manifold features
426 Hemi All All 8-bbl Cross Ram Stock *P5007534 *P5007534 rectangle ports and is designed for two 4-bbl carburetors.
426 Hemi All All 4-bbl — *P4876188 *P4876188 *P5007534 Aluminum Cross Ram Intake —
426 Hemi All All 8-bbl Dual Quad *P4510633 *P4510633 *P4510633 Dual 4-bbl Carbs (426, 472, 528 Hemi)
F. Dual Plane Intake — 4-bbl

This revised 4-bbl aluminum Dual Plane Intake Manifold
features a rectangle port and fits all Hemi 426/472/528
engines. Now with stock exhaust heat located on rear of
manifold, just like the original dual 4-bbl production inline
manifold.
*P4876188 Aluminum Dual Plane Intake —

4-bbl Carb (426, 472, 528 Hemi)
HEMI® ENGINES
A. Intake Manifold Gasket Sets
Custom-fit Intake Gasket Sets come complete to service one
engine (includes gaskets, end seals, O-rings, and distributor
seal where applicable).
P4120086 Intake Manifold Gasket Set —

0.060" Thick (426 Hemi Except D4–D6)
0.090" Thick (426 Hemi Except D4–D6)
B. Intake Manifold Heat Shield

Original equipment Heat Shield for all 426 Street Hemi
Intake Manifolds. Bolts to the bottom of the Intake Manifold
to prevent hot engine oil from heating the manifold and A. B.
robbing horsepower. Also fits Aluminum Dual Plane Intake
Manifold (P4876188).
P4529431 Intake Manifold Heat Shield (426 Hemi)
C. Intake Manifold Screw Set

Set of 16 Allen screws and washers to attach the A-990
Hemi Cross Ram Intake Manifold.
P4529330 Intake Manifold Screw Set (426 Hemi)
D. Intake Manifold Plug Package

Intake Manifold Plug Package consists of eight manifold plugs.
Used in Max Wedge and Hemi Cross Ram Intake Manifolds.
P5249926 Intake Manifold Plug Package

(426 Hemi, Max Wedge) C. D.
CARBURETORS
E. Holley Cross Ram Carburetors

Holley Carburetors were the “go fast” choice for the
legendary Super Stock 426 Hemi engine. Mopar brings back
these original equipment Holley carbs for 1964, 1965 and
1968 Race Hemi engines. These are exact reissues of the
original carburetors. Airflow is 770 cfm.
*P4452778 Cross Ram Carburetor — Right Hand

(1964–65, 1968 Race 426 Hemi)
*P4452779 Cross Ram Carburetor — Left Hand
(1964–65, 1968 Race 426 Hemi)
F. Air Horns E. F.
These Air Horns are for use with Holley Hemi Cross Ram
Carburetors. Perfect for Super Stock competition or restoration.
Sold as a pair, includes front and rear.
*P5007809 Air Horns (426 Hemi)
G. Cross Ram Linkage

This Cross Ram Linkage is for use with Hemi Cross Ram
Intake Manifold (P5007534) and Holly Carburetors (P4452778
and P4452779).
P4510635 Cross Ram Linkage (426 Hemi)
F. G.
HEMI® ENGINES
OILING COMPONENTS
A. Oil Pans
Oil Pans contain a factory engineered and approved oil pan,
drain plug and washer. Center sump style is used on passenger
car applications, while the rear sump style is used for pickups.
Windage trays may be used if desired.
P4529884 Oil Pan — 6 Quart, Center Sump

(1970–71 426 Hemi B- and E-Body)
B. Windage Trays
Windage Trays are designed to provide improved engine
A. lubrication by reducing the interior windage at higher
engine speed. Packages include tray and two pan gaskets.
P4120998 Windage Tray — 3.75" Stroke

C. Oil Pan Gaskets

Oil Pan Gaskets for Big Block/Hemi applications. Note that
two are required for windage tray applications.
P4452099 Race Oil Pan Gasket — Set of Two

P3412049 Oil Pan Gasket — Sold Individually
D. Oil Pan Bolt Set

B. C. P4120613 Oil Pan Bolt Set (Hemi, Big Block)
E. Oil Pickup and Screen Assemblies

Factory original reissued Hemi Oil Pickup and Screen
Assemblies.
P5007818 Oil Pickup and Screen Assembly —

8 Quart, 1/2" Pipe, for Pan P5007816
(426 Hemi, Big Block)
5 Quart, 1/2" Pipe (1966–69 426 Hemi)
6 Quart, 1/2" Pipe, for Pan P4529884
(1970–71 426 Hemi)
6 Quart, 1/2" Pipe, Siamese-Bore,
Not Raised Cam (426 Hemi, “RB”)
D. E.
F. Oil Pressure Relief Spring
Oil Pressure Relief Spring increases engine oil pressure over
stock spring for high-performance applications. Delivers up to
70 lbs. of oil pressure. Includes a cap and instructions.
P4286571 Oil Pressure Relief Spring Set (Hemi,

Big Block)
G. Oil Pump Assembly

This high-output Oil Pump Assembly provides a 25%
increase in oil volume. Ideal replacement for stock pump
in high-performance applications.
*P4286590 Oil Pump Assembly (Hemi, Big Block)
F. G.
HEMI® ENGINES
A. Distributor Drive Gear Assemblies
Distributor/Oil Pump Driveshaft Gear Assemblies feature a
hardened tip shaft with full radius blend from hex to round
and pinned gears.
P3412064 Distributor Drive Gear — Flat Tappet

Cams, Milodon Oil System (426 Hemi
and Big Block)
P3571071 Distributor Drive Gear — Flat Tappet
Cams (426 Hemi and Big Block)
P3690875 Distributor Drive Gear — Roller Tappet,
Aluminum-Bronze Gear (426 Hemi and
Big Block)
P3690876 Distributor Drive Gear — Roller Tappet, A. B.
Aluminum-Bronze Gear, Milodon System
B. Tube and Peen Tool Package

Tube and Peen Tool Package blocks off oil to right-side tappet
bores. Required for race engines with high-lift roller cams.
*P4452812 Tube and Peen Tool Package

C. High-Performance Oil Filter

High-Performance Oil Filter is engineered to meet the
demands of heavy-duty and high-performance applications.
Filter is black with Mopar Performance Pentastar logo.
P4452890 High-Performance Oil Filter —

Black Finish (426 Hemi, Big Block, C. D.
Small Block, Slant Six, 3.9L V6)
D. Race Oil Filter

High-performance, heavy-duty Race Oil Filter has a thicker
and longer canister with high burst strength. Filter is black
with Mopar Performance Pentastar logo.
P4529190 Race Oil Filter — Black Finish

(426 Hemi, Big Block, Small Block)
E. Restoration Oil Filters

Mopar has reissued these service replacement oil filters,
used in the 1960s and 1970s.
P4529187 Restoration Oil Filter (426 Hemi,

P4529805 High Performance Restoration Oil Filter E.
Note: These filters may not fit some V8 applications

(those after 1972 requiring short filters).
F. Oil Pump Priming Shaft

Special hardened steel priming shaft fits on any 3/8" or
larger drill. Insert shaft into hole where distributor fits.
Pressurizes oil galleys to ensure against dry starts and
ruining your engine.
P4286800 Oil Pump Priming Shaft (V8)
F.
HEMI® ENGINES
COOLING COMPONENTS
A. NEW! Radiator Cap
When you open the hood, it’s right there where everyone
can see it—especially the judges. If your radiator cap is
more than 10 years old or just looks bad, replace it with
this original equipment quality piece.
77R06021 Radiator Cap, 16 lb. (22" and 26" Radiator)
B. Lightweight Aluminum Water Pump

Lightweight Aluminum Water Pump features an 8-blade
impeller. Dimensions are the same as stock cast iron version.
A.
P5007643AB Aluminum Water Pump (426 Hemi)
C. Aluminum Water Pump Housing

Aluminum Water Pump Housing has bosses for Hemi engine
applications (1964–71).
P4286900 Aluminum Water Pump Housing

(1964–71 426 Hemi)
P2206445 Bracket for Alternator (426 Hemi)
D. Water Pump Installation Kit

Water Pump Installation Kit includes water pump gasket,
pump housing gasket, plugs, water pump screws and long
and short housing screws.
P5007449 Water Pump Installation Kit

B. (426 Hemi and Big Block)
E. Chrome Water Pump Housing Bolts

chrome bolts.
P5007621 Chrome Water Pump and Housing Bolts

(426 Hemi)
P4876280 Front Cover Seal (426 Hemi, Big Block,

Small Block)
P4876769 Front Cover Gasket (426 Hemi and
Big Block)
C. D.
E. F.
25
HEMI® ENGINES
A. Chrome Water Neck
This high-quality Chrome Water Neck is made of heavy-duty
material. Includes gasket and two chrome bolts.
P4286759 Chrome Water Neck (Through 1978

426 Hemi, Big Block, Small Block)
B. NEW! 4-Blade Fan

This 4-blade fan fits all 1964–65 Super Stock applications, as
well as numerous LA, B-RB Engines. Made from original tooling.
03462185 4-Blade Fan
C. Viscous Fan Package A.

Most late 1960s and early 1970s factory-built muscle cars
were equipped with viscous fans for cooling purposes.
The package provides thermostatically controlled cooling,
includes a lightweight balanced fan and takes the least
amount of horsepower from the engine. Offers up to 15
horsepower gain on typical high-performance V8s. 15" fan
blade, 3/4" depth.
P4120758 Viscous Fan Package (426 Hemi,

D. Radiator Cooling Fan Shrouds

These Restoration Radiator Cooling Fan Shrouds
measure 26.00".
P2785434 Restoration Radiator Cooling Fan Shroud

(1967–69 426 Hemi, B-Body) B. C.
P2998326 Restoration Radiator Cooling Fan Shroud
(1970–73 426 Hemi, B- and E-Body)
E. Thermostat
This heavy-duty thermostat can handle increased heat
management duties in high-performance engines. Comes
with replacement gasket.
*P4876307 180° Thermostat (Hemi, Big Block)
F. Engine Paint
Mopar enamel engine paint is matched to O.E. colors to keep
your engine compartment looking original. 16-ounce cans.
P4120751 Race Hemi Orange Engine Paint

(1964, ’65 and ’68 Race Hemi)
P4349216 Street Hemi Orange Engine Paint D.
(1966–71 Hemi)
P5007733 Hemi® Restoration Orange Engine Paint
(1966–71 Street Hemi)
E. F.
BIG BLOCK
27
28
Big Power. Big Performance. And
BIG BLOCK
second-rate aftermarket parts, when make your big block look and perform
now big looks, with authentic Mopar you can get the pieces you need straight the way Chrysler engineers intended.
restoration parts. No need to search from the source. Mopar’s high-quality You know what they say —
endlessly at swap meets or settle for parts fit your application perfectly and ”No replacement for displacement.”
29
BIG BLOCK
Cast Iron Big Blocks
The legend just got better! These may look like the same
street blocks that set the standard at drag strips for a
generation, but they have a whole new attitude. Just check
out the features:
• 100% CNC machined for accuracy and quality
• Brand-new castings made from high nickel alloy cast iron
• Thicker deck surface for improved rigidity and gasket
sealing
• Ductile iron main caps, which are cross-bolted on the three
center caps on all Siamese-bore 440 blocks
• Stock 10.72" deck height allows for standard components
• Machined to accept all standard production pieces
A. Cast Iron Wedge Blocks

Cast Iron Wedge Blocks feature factory-size bores and
maintain water flow between the cylinders (non-siamese
bore) for improved cooling and sealing durability. These
blocks are fully water-jacketed.
*P5007671AB 426 Max Wedge Cast Iron Block —

2-Bolt Mains, Finish Bored at 4.25"
*P5007815AB 440 Wedge Cast Iron Block —
2-Bolt Mains, Finish Bored at 4.32"
ENGINE BLOCK COMPONENTS
B. Rear Main Bearing Seal Retainer Kit

Kit contains engine rear main seal retainer, retainer bolts,
and seal package.
A.
P4529732 Rear Main Bearing Seal Retainer Kit
(Hemi, Big Block)
C. Oil Seal Package

Oil Seal Package includes crank seals and installation tool.
P4271961 Oil Seal Package (Hemi, Big Block)
D. Freeze Plugs
Round, press-in brass core engine block Freeze Plugs fit
standard and Mopar Cast Iron Big Blocks.
P5249708 Freeze Plugs (Hemi, Big Block)
E. Block Hardware Package

This Block Hardware Package includes all necessary dowels, B. C.
plugs, bushings and keys, as well as core plugs, rear cam
bearing plug, drive gear bushing, and head dowels.
P5249259 Block Hardware Package (Hemi, Big Block)
D. E.
BIG BLOCK
A. Engine Teardown Gasket Sets
Engine Teardown Gasket Sets include oil pan, cylinder
head, valve cover, chain case cover, intake manifold,
and oil pump gaskets.

(383/400 Big Block)
(426W/440 Big Block)
*P4452112 Race Engine Teardown Gasket Set
(383/400 Big Block)
*P4452113 Race Engine Teardown Gasket Set
(426W/440 Big Block)
A.
B. Forged Race Crankshafts
These high-strength, high-quality forged steel crankshafts
are machined from 4340 steel. For high-performance race
applications. Eight-bolt flange for Hemi and “RB” engines.
*P5007250 Forged Race Crankshaft —

4.15" Stroke, Full Radius, 8-Bolt,
Balanced (426 Hemi, Wedge, “RB”)
*P5007251 Forged Race Crankshaft —
3.75" Stroke, Full Radius, 8-Bolt,
Balanced (426 Hemi, Wedge, “RB”)
C. Crank Key Package

This Crank Key Package locates the crankshaft sprocket on
B. the nose of the crankshaft. Contains two keys.
P5249822 Crank Key Package (426 Hemi, Big Block,

Small Block, Slant Six)
BIG BLOCK ENGINE DISPLACEMENT (CUBIC INCHES)
D. Crank Bolt Packages
Stroke
Bore 3.75" 4.50" These Crank Bolts are used to attach the vibration damper
4.15"
to the crankshaft.
4.25" 426 472 511
4.31" 438 485 525 P5249557AB Crank Bolt Package — 2.25" Length
4.32" 440 487 528 Aftermarket Dampers)
4.38" 452 500 542 P5249562 Thin Damper Crank Bolt Package —
1.25" Length (426 Hemi and Big Block)
4.50" 477 528 573
4.53" 484 535 580
4.56" 490 542 588
C. D.
BIG BLOCK
A. Steel Vibration Damper
This Steel Vibration Damper features a steel ring and a
universal 6-bolt front pulley mount pattern. SFI approved.
P5249694 Steel Vibration Damper (440 Forged Crank,

1962–70 361/383 “B” Forged Crank,
413/426 Wedge)
B. Thin Crank Vibration Damper

This Thin Crank Vibration Damper is designed for forged
cranks. Features 90° index markings and a symmetrical
6-bolt pattern for pulley attachment.
P3830183 Thin Crank Vibration Damper (Hemi, Big Block) A. B.
Note: On pre-1972 engines with stock pulleys, minor

modifications will be needed to attach bottom pulley. Not SFI
approved. Must use 383/440 engine pulleys (not available
through Mopar).
C. Damper Degree Timing Tape

Improve timing accuracy with this Damper Degree Timing
Tape. Marked in 90° increments. Self-adhesive strip adheres
to crank vibration damper for clear identification of marks.
Permits initial total spark advance up to 60° instead of only
10°–15° as on chain case timing tab.
D. Oil Slinger
This Oil Slinger protects the front seal from excessive oil C. D.
contact. Forces lubricant oil into the chain.
P5249636 Oil Slinger (Hemi, Big Block)
ROLLER TIMING CHAIN

AND SPROCKETS
E. All-Out Race Chain and Sprockets
Matched sprockets and double roller chain for all-out race
applications. Has 3 matched keyways on crank sprocket to
adjust cam timing. Kit includes magna-fluxed sprockets and
roller timing chains.
*P4452815 All-Out Race Chain and Sprockets —

3-Bolt, Standard Size (Hemi, Big Block)
E.
F. Double Roller Chains and Sprockets
High-strength Double Roller Chains provide added durability
and decreased rotational friction versus the production silent
chains. Kit includes magna-fluxed sprockets and roller timing
chain. Has 3 machined keyways in crank sprocket to adjust
cam timing.

1-Bolt Mount
3-Bolt Mount (Hemi, Big Block)
G. Chrome-Plated Front Timing Chain Cover

Chrome-Plated Front Timing Chain Cover package includes
cover, seal, and gasket.
F. G.
P4349816 Chrome-Plated Front Timing Chain Cover
(1968–91 426 Hemi and Big Block)
BIG BLOCK
A. Chrome Bolt Package for Front Timing Cover
chrome bolts.
P4452795 Chrome Bolt Package for Front Timing

Cover (Hemi, Big Block)
B. Front Cover Seal and Gasket
P4876280 Front Cover Seal (Hemi, Big Block)

P4876769 Front Cover Gasket (Hemi, Big Block)
A. B.
C. Purple Shaft Camshafts
Mopar Performance cams are designed and engineered
exclusively for your engine. A wide range of profiles is
available from mild to wild and bracket to all-out racing.
All Mopar Performance cams are designed, developed, dyno‘d
and track tested by engineers. These cams are developed
for increased power and rpm potential while maintaining
reliability and the best possible low-speed characteristics,
including torque and idle quality. These Purple Shaft cams
offer the best horsepower-to-dollar-spent value. Each
package contains the cam, cam lube, tappets and
instruction sheet.
*P4452783 Hydraulic Camshaft—383/440 HP

*P4529270 Hydraulic Camshaft—440 6-BBL/Six Pack
*P4120659 Mechanical Camshaft—426 Max Wedge
C.
HYDRAULIC CAMSHAFTS
Advertised
Part Number Duration @ 0.050" O-Lap Center Line Lift Recom. Spring Basic RPM Applications & Comments
Resto, 383/440 Magnum Super Commando

*P4452783 268/284 228/241 46 115 0.450"/0.458" P3690933 Idle-5800 Road Runner (1-Bolt)
Resto, 440 Six Pak (1969–71)

*P4529270 268/284 228/241 46 115 0.450"/0.458" P3690933 Idle-5800 (3-Bolt)
*P4452993 280/280 238/238 60 110 0.474/0.474 P3690933 2000–5900 Drag mild comp.
*P41200237 292/292 248/248 76 108 0.509/0.509 P5249848 2600–6000 Drag mod. comp.
MECHANICAL CAMSHAFTS
Advertised
Part Number Duration @ 0.050" O-Lap Center Line Lift Valve Lash Recom. Spring Basic RPM Applications & Comments
426 Max Wedge Replacement

*P4120659 284/284 241/241 60 112 0.528"/0.528" 28/32 P5249848 2400– 6600 (415hp)
BIG BLOCK
A. Camshaft Bearings
Complete engine set of Camshaft Bearings.
P5249711 Camshaft Bearings — Babbitt Applications

B. Camshaft Sprocket Bolts
P5007801 Camshaft Sprocket Bolt Kit —

for 3-bolt mounting, includes three bolts
P6030269 Camshaft Sprocket Bolt — Sold Individually
A. B.
C. Offset Camshaft Bushing Set
Offset Camshaft Bushing Set includes five bushings:
2°, 4°, 6°, 8° offset, and one on-center bushing.
*P3690936 Offset Camshaft Bushing Set

(426 Hemi, Big Block, Slant Six)
Note: Color guide only — check installations with dial indicator.

Gold = 2°, Copper = 4°, Silver = 6°, Black = 8°
D. Hydraulic Tappet
Sold individually.
P4006767 Hydraulic Tappet (Hemi and Big Block)
E. Mechanical Tappet
Sold individually. C.
*P2843177 Mechanical Tappet — 0.005" Undersize
PUSHRODS
F. Pushrods
Engineered to be installed in your engine rebuilding project.
These 3/8" diameter Pushrods are sold as complete engine
sets or individually for service.
P4529557 Hydraulic Pushrods — 8.57" Length,

Set of 16 (“B” Engines)
Set of 16 (“RB” Engines)
Sold Individually (“RB” Engines)
P4529560 Mechanical Pushrods — 9.20" Length, D. E.
Ball and Cup Style, Set of 16 (“RB” Engines)
P4529546 Mechanical Pushrod — 9.20" Length, Ball
and Cup Style, Sold Individually (“RB” Engines)
Mechanical/Hydraulic Pushrods (Not Pictured)

Special Pushrods to use with adjustable rocker arms and
hydraulic tappet cams.
P4876392 Mechanical/Hydraulic Pushrods —

Set of 16 (“RB” Engines)
P4876391 Mechanical/Hydraulic Pushrod —
Sold Individually (“RB” Engines)
F.
BIG BLOCK
CYLINDER HEADS, GASKETS
AND HARDWARE
A. Max Wedge Cast Iron Cylinder Heads
These Max Wedge Cast Iron Cylinder Heads feature a large
port window for increased airflow and a short side radius on
exhaust port for added flow. Designed to replace 1962–64
Max Wedge heads. Use closed combustion chamber, 6-bolt
valve covers and cast-in pedestals.
*P5007494 Cast Iron Stage III Cylinder Head —

2.08" Intake, 1.88" Exhaust
(1962–64 Max Wedge)
A. *P5249824 Cast Iron Stage III Cylinder Head —
2.14" Intake and 1.81" Exhaust
(1962–64 Max Wedge)
B. Stage V Wedge Cast Iron Cylinder Heads

Developed by Mopar Performance, this Stage V Cylinder
Head is designed to be interchangeable with the stock
Big Block Cylinder Heads. They feature heat crossover for
improved drivability. Head uses standard Big Block valve
gear, gaskets and valve covers, and out-flow ”906“ heads on
intake and exhaust (stock and mildly modified). Same open
combustion chamber as 1968–78 production heads. Head
uses 6-bolt valve cover; rocker shaft pedestals cast-in. Uses
offset intake rockers.
*P4529993 Stage V Cast Iron Cylinder Head —

2.14" Intake and 1.81" Exhaust (Wedge)
B.
C. Composition Material Cylinder Head Gaskets
Thick, 0.040" to 0.042" (unless otherwise noted) Composition
Material Cylinder Head Gaskets can be used for replacement
or competition applications up to 12.5:1 compression ratio.
Sold as an engine set.

Gaskets — Up to 4.420" Bore, 0.038" Thick
Gaskets — Up to 4.380" Bore
Gaskets — Over 4.380" Bore
C.
BIG BLOCK CYLINDER HEADS AND HEAD ASSEMBLIES

Max Wedge Cylinder Heads
Part Head / Approx.
Number Assembly Material Chamber Valve Sizes Weight Description
Max Wedge III with revised ports — Cast pedestal, 6-bolt valve cover
*P5007494 Head Cast Iron 96 cc 2.08/1.88 50 (approved for NHRA Stock and Super Stock)
*P5249824 Head Cast Iron 96 cc 2.14/1.81 50 Max Wedge III — Cast pedestal (not legal for Stock/Super Stock)
Stage V Cylinder Heads

Part Head / Approx.
Number Assembly Material Chamber Valve Sizes Weight Description
*P4529992 Head Cast Iron 90 cc 2.08/1.74 50 Replaces Stock — Same as 1968–78 casting and chamber
*P4529993 Head Cast Iron 90 cc 2.14/1.81 50 Replaces Stock — Same as 1968–78 casting and chamber
*P5249112 Assembly Cast Iron 90 cc 2.14/1.81 55 Ported assembly — 15% airflow increase
BIG BLOCK
A. Steel Shim Cylinder Head Gasket Set
Steel Shim Cylinder Head Gasket Set features 0.020"
compression thickness. Sold as an engine set.
P4286754 Steel Shim Cylinder Head Gasket Set
B. Head Bolt Set

Head Bolt Set includes all head bolts and washers as
required.
C. Hardened Washer Sets

Hardened Washer Sets for use with head bolts and main A. B.
caps. They are sold in sets of 20, unless otherwise noted.
P4120456 Hardened Washer Set — 3/8" (Big Block)

P4120459 Hardened Washer Set — 1/2" (426 Hemi,
Big Block)
D. NEW! High-Performance PCV Valve

For you owners of V8 engines with four-barrel carburetors,
Mopar now offers high-performance PCV valves. They look
just like the originals, but feature a free-flow design to help
performance V8s breathe easier. Sold individually.
04343581 High-Performance PCV Valve

(V8 Four-Barrel)
E. “As Cast” Aluminum Valve Cover Set

These Cast Aluminum Valve Covers are sold “as cast,” so C. D.
you can set up the breathers the way you want them. There’s
no paint to remove if welding is done. Mopar Performance
Pentastar logos are cast into each cover. Cast aluminum
covers are more rigid than stamped valve covers, and they
help prevent valve cover leaks. Set includes two valve covers
and oil filler caps.
P5007615 “As Cast” Aluminum Valve Cover Set

P4452091 Race Gaskets — Rubber Reinforced Cork
(Set of Two)
F. Black Wrinkle Cast Aluminum

Valve Cover Set
These high-strength Valve Covers are more rigid than
standard aluminum covers and offer better anti-leak
properties. Set includes two valve covers, baffle package,
and two oil filler caps. E.
P5007614 Black Wrinkle Cast Aluminum

Valve Cover Set
(Set of Two)
F.
36
BIG BLOCK
A. Chrome Valve Cover Set
Dress up your Big Block engine compartment with this
Chrome Valve Cover Set. Includes valve covers and
grommets. Quality chrome plating. Stamped steel with
Mopar Pentastar logo.
P5007448 Chrome Valve Cover Set

(Set of Two)
P4120101 Valve Cover Gaskets — Production Material
(Set of Two)
B. Polished Cast Aluminum Valve Cover Set

A. B. These Polished Cast Aluminum Valve Covers are perfect
for that show car engine look. They feature the Mopar
Performance Pentastar logo and are polished to a chrome-
like shine. Set includes two valve covers and two oil filler
caps (does not include baffling).
P5007616 Polished Cast Aluminum Valve Cover Set

(Set of Two)
C. Stamped Aluminum Valve Cover Set

Lightweight, blue anodized aluminum Big Block valve covers
are distinctive in any engine compartment. Mopar Pentastar
logo is imprinted in each cover. Set includes two covers with
grommets (does not include baffling).
P4529199 Stamped Aluminum Valve Cover Set

P4120101 Valve Cover Gaskets — Production Material
(Set of Two)
D. Valve Cover Accessory Set

Valve Cover Accessory Set includes 12 chrome-plated screw
and washer assemblies, one chrome-plated oil filter cap, and
two rubber grommets. Grommet Set and Bolt and Washer
Set can also be purchased individually. For stamped steel
valve covers only.
P4120272 Valve Cover Accessory Set (Big Block)

P4349620 Chrome Hold-Down Bolt and Washer Set
(Big Block)
P5007419 Chrome Valve Cover Grommet Set
(Big Block)
C. E. Baffle and Screw Package

For cast aluminum valve covers only.
P5007052 Baffle and Screw Package (Big Block, Small

Block, Dodge Truck /Jeep Magnum Engines)
D. E.
37
BIG BLOCK
A. Valve Cover Retaining Screw Set
Valve Cover Retaining Screw Set includes 12 screws. For cast
aluminum valve covers only.
P5007053 Valve Cover Retaining Screw Set (Big Block)
B. Valve Cover Bolt Kit

Valve Cover Bolt Kit includes 12 chrome-plated screws for
stamped steel and aluminum valve covers.
P5007458 Valve Cover Bolt Kit (Big Block)
C. Cast Aluminum Valve Cover Grommet Set

Set of die-cast grommets to service cast aluminum valve A. B.
covers. Set includes one grommet for PVC and one that can
be used as a plug or opened for breather.
P5007921 Cast Aluminum Valve Cover Grommet Set

(Big Block)
D. Chrome Breather Cap

Chrome Breather Caps are for use with Mopar cast aluminum
valve covers. Use them to fill extra valve cover holes in cast
aluminum valve covers. Push-In Style Breather Cap requires
the use of Grommet Set P4529882.
*P4529880 Twist-On Bottom Vented Breather Cap

(Big Block)
*P4529881 Push-In Style Breather Cap (Big Block)
*P4529882 Rubber Grommet Set — for Breather
Cap P4529881 C. D.
VALVES AND VALVE HARDWARE

E. Valves
These stainless valves have swirl-polished underheads that
have no flat or ski jump areas. They feature a 3/8" stem
diameter and one square groove.
*P5249199 Intake Valve — 2.08" Dia., 4.86" Stem Length

*P5249201 Exhaust Valve — 1.74" Dia., 4.87" Stem Length
F. Valve Seals E.
Made of high-temp Viton material, these Valve Seals
feature a full or semi-umbrella shape for best dual-purpose
use. Helps prevent oil seepage down valve guides. Not
recommended for use with dual valve springs. Sold as a
set of 16.
P4120492 Valve Seals — 3/8" Stem Size

(Big Block and Small Block)
G. Valve Stem Lash Caps

These lash caps are 0.080" thick and fit between the end of
the valve and the rocker arm tip. They are made of hardened
steel for improved rocker tip durability. Caps feature larger
area than stock valve tips, to help spread the rocker loads.
Sold in sets of 16.
*P4120626 Valve Stem Lash Caps — 3/8" Stem F. G.

BIG BLOCK
A. Valve Keepers (Locks)
These single groove style Big Block Valve Keepers are made
from hardened material. They feature a 3/8" stem diameter
and can be used for restoration or performance applications.
Sold as cylinder head sets of 16 pieces (note that 2 sets are
required for all V8 engines).
P4120618 Valve Keepers (Big Block, Small Block,

Slant Six, 3.9L V6)
P4286612 Valve Keepers (Big Block, Small Block,
Slant Six, 3.9L V6)
B. Valve Springs
A. B. High-pressure Valve Springs can be used on exhaust and intake
valves for all high-performance applications. They feature a
shorter fully compressed height and allow for increased valve
lift. Springs maintain spring load at higher rpms.

Note: Please refer to the reference chart for proper application.
C. Valve Spring Retainers

C. D. Valve Spring Retainers for Big Block engines are available
in two levels of performance: Chrome Moly for heavy-duty
applications and Titanium for top-level race performance.
Sold individually.
VALVE SPRINGS
*P4007178 Titanium Valve Spring Retainer
Part (Big Block, Small Block, Slant Six, 3.9L V6)
Installed
Number Description OD Wire Dia. Lift Range Material Retainers
Ht. *P4120785 Titanium Valve Spring Retainer (426 Hemi,
Chrome Big Block, Small Block, Slant Six, 3.9L V6)
P4286812 1.83"/1.86" Single/Damper 1.49" 0.208" 0.430"/0.460" P4452033 *P4286775 Titanium Valve Spring Retainer (426 Hemi,
Vandium
P4452769, *P4452033 Chrome Moly Valve Spring Retainer (Big
Chrome
P3690933 1.83"/1.86" Single/Damper 1.53" 0.224" 0.440"/0.500" P4529288,
Vandium Block, Small Block, Slant Six, 3.9L V6)
P5007858
Chrome D. Valve Guides
P5249848 1.86"/1.87" Single/Damper 1.55" 0.216" 0.480"/0.540" P4452769
Silicon
These silicon-bronze alloy Valve Guides are designed for
Chrome aluminum heads. They must be pressed into the head once
P2806077 1.83"/1.86" Dual/Damper 1.52" 0.215" 0.500"/0.610" P4120785
Vandium it is prepped. To replace guides in aluminum heads requires
Chrome removal of the old guide and some prep to resize the guide
P4876064 1.86"/1.88" Dual/Damper 1.60" 0.216" 0.590"/0.640" P4120785 holes. Guide ID must be sized for the valve stem once pressed
Silicon
into the head. Guides can be used to modify, rebuild or repair
P2946353 1.99"/2.00" Dual/Damper 1.59" 0.224" 0.520"/0.700” Special P4120785 aluminum heads. Sold individually.
Chrome P5249672 Valve Guide — 3/8" Valve Stem, Intake

P5249849 2.00"/2.02" Dual/Damper 1.55" 0.216" 0.650"/0.750" P4120785
Silicon and Exhaust (Big Block Stage VI)
Chrome
P4007536 2.00"/2.02" Triple 1.62" 0.225" 0.640"/0.745" P4286775
Silicon
VALVE SPRING RETAINERS

Part Number Material Locks Valve Stem Valve Spring Installed Height
*P4452033 Chrome Moly 7° 3/8" Single Standard
*P4286775 Titanium 10° 5/16" Triple 0.060" Increase
BIG BLOCK
ROCKER SHAFTS, SUPPORTS
AND HARDWARE
A. Rocker Shaft Springs
Rocker Shaft Springs for use with Big Block mechanical
rocker arms. Use to separate and locate rocker arms on shaft.
Package includes one engine set (eight springs).
P4452801 Rocker Shaft Springs
B. Hydraulic Rocker Arm Packages

These heavy-duty Hydraulic Rocker Arm Packages feature
thicker cross-sectional material in pushrod socket area
for added durability, similar to the O.E. 440 Six Pack style.
A.
Complete package includes 16 heavy-duty hydraulic rocker
arms, rocker shaft retainers and hold-down bolts. Rocker
shafts not included. Individual service rocker arms are
also available.
*P4529743 Hydraulic Rocker Arm Package —

1.5:1 Ratio
*P4529476 Service Hydraulic Rocker —
1.5:1 Ratio, Right, Sold Individually
1.5:1 Ratio, Left, Sold Individually
Note: For the 383/400 “B” and 413/440 “RB” engines, the left
rocker socket is approximately 1/16" to the right, and the right
rocker socket is approximately 1/16" to the left. High-ratio
rockers may require grinding on block and head for clearance.
B.
C. Cast Iron/Ductile Mechanical Rocker
Arm Packages
This Cast Iron/Ductile Iron Mechanical Rocker Arm Package
includes 16 rocker arms, eight separator springs (includes
Max Wedge), adjusting screws and locknuts. Features
mechanical lash adjustment with locknut and high-strength
cast iron/ductile iron rocker arms. Required with mechanical
camshafts, can be used with hydraulic camshafts. Rocker
shafts not included. Individually sold service rockers are
also available.
*P4120974 Cast Iron/Ductile Iron Mechanical

Rocker Arm Package — 1.5:1 Ratio
Note: High-ratio rockers may require grinding on block

and head for clearance.
C.
D. Rocker Shafts
P4529101 Rocker Shaft — Hydraulic Valve Gear,

On-Center (Sold Individually)
P5249092 Rocker Shafts — Aluminum Roller Valve
Gear, On-Center, Chromed (Set of 2)
E. Rocker Shaft End Plugs

Rocker Shaft End Plugs are sold as a set of 4. They do
not fit aftermarket rocker shafts.
P5249633 Rocker Shaft End Plugs

D. E.
BIG BLOCK
A. Rocker Shaft Hold-Down
Billet Aluminum Rocker Shaft Hold-Down provides greater
rocker shaft stiffness. Helps Rocker Shaft maintain roundness
with attaching torque. Roundness is important with
mechanical rockers and high spring loads. Anodized blue.
P5249714 Rocker Shaft Hold-Down
B. Rocker Shaft Retainers and Bolts

Each kit contains previously hard-to-find hold down
retainers and bolts necessary to secure both rocker shafts.
These retainers are manufactured to Mopar Performance
O.E. specs to assure high quality. For use on all cylinder
A. B. heads with cast-in rocker stands.
P4529744 Rocker Shaft Retainers and Bolts
INTAKE MANIFOLDS AND HARDWARE

C. Aluminum Cross Ram Intake Manifold —
Dual 4-bbl Max Wedge
After 40 years, Mopar is pleased to bring back the Cross
Ram Intake Manifold! This brand-new design improves
airflow by as much as 20% and is fully interchangeable on
all Max Wedge applications. It is based on the 1964 Max
Wedge intake and uses production or aftermarket style AFB
carburetors. Designed for use with RB application with
Max Wedge heads.
*P5007330 Aluminum Cross Ram Intake Manifold —

C.
Dual 4-bbl Carbs (Max Wedge and
“RB” Engines)
P5153567 Max Wedge Linkage Kit
D. Aluminum Dual Plane Intake Manifolds — 4-bbl

These Aluminum Dual Plane Intake Manifolds are designed
for use with standard cylinder heads. They bolt on with no
modifications necessary and accept standard flange Holley
carburetors. Manifolds are similar to the production, but have
larger cross-sectional area runners for increased power. Heat
crossovers make these intake manifolds ideal for dual purpose
applications.

4-bbl Carb (Production 361/383/400
with Stage IV/V and Production Heads)
D. 4-bbl Carb (Production 413/426 Street
Wedge/440 with Stage IV/V and
Production Heads)
E. Aluminum Dual Plane Intake Manifolds — Six Pack
*P4529055 Aluminum Dual Plane Intake Manifold —

Six Pack (Production 361/383/400 with
Stage IV/V and Production Heads)
*P4529056 Aluminum Dual Plane Intake Manifold —
Six Pack (Production 413/426W/440 with
Stage IV/V and Production Heads)
E.
BIG BLOCK
A. Cross Ram Intake Manifold Service Gaskets
These gaskets are required to service Cross Ram intake manifolds.
P5007334 Cross Ram Intake Manifold Service Gaskets
B. Composite Intake Manifold Gasket Set
Use these special composite material intake gaskets for
large port Max Wedge heads originally built in 1962–64
for 413/426 engines. These gaskets offer advantages in
reliability and shape, allowing for more port modifications.
Package includes two gaskets and two end seals.
P5249643 Composite Intake Manifold Gasket Set
(Max Wedge)
C. Intake Manifold Gasket Heat Block-Off A. B.
These stainless steel Intake Manifold Gasket Heat Block-Offs
keep exhaust heat from transferring to the intake manifold
for a cooler, denser fuel-air mixture.
P4286825 Intake Gasket Heat Block-Off (“B” Engines)
P4286826 Intake Gasket Heat Block-Off (“RB” Engines)
P4452103 Race Intake Manifold Gaskets
(Production 361/383/400 with Stage IV/V
and Production Heads)
P4452105 Race Intake Manifold Gaskets
(Production 413/426W/440 with Stage IV/V
and Production Heads)
D. Intake Manifold Gasket Reinforcement Bars
Hard-to-find “B” and “RB” engine Intake Manifold Gasket
Reinforcement Bars hold down the intake manifold gasket at
the front and back of the block. Sold in pairs.
C.
P5249492 Intake Manifold Gasket Reinforcement Bars
(“B” Engines)
P5249493 Intake Manifold Gasket Reinforcement Bars
(“RB” Engines)
E. Intake Manifold Plug Package
This Intake Manifold Plug Package consists of eight manifold
plugs. Used in Max Wedge and Hemi Cross Ram Intake Manifolds.
P5249926 Intake Manifold Plug Package
(Max Wedge, Hemi Cross Ram)
F. Choke Seal
This Choke Seal is for dual plane production and aluminum
intake manifolds. Package includes the choke cup, gasket,
and two screws. Does not include a choke.
P5249639 Choke Seal (Big Block, Small Block)
G. Intake Manifold Attaching Bolts D. E.
Complete package of 16 bolts required to attach the
intake manifold to the cylinder heads. Bolts measure
3/8" diameter x 1-3/4" length.
P4876770 Intake Manifold Attaching Bolts
(383/440 Big Block)
F. G.
42
BIG BLOCK
OILING COMPONENTS
A. Oil Pan
Oil Pan packages include a factory engineered and approved
oil pan, drain plug, and washer. Center sump style is used on
passenger car applications, while the rear sump style is used
for pickups. Windage trays may be used if desired.
P5249064 Oil Pan — 6 Quart, Rear Sump
(Hemi Big Block)
P5007807AB Oil Pan — 6 Quart, Center Sump
(Hemi Big Block)
A. B. B. Chrome Dipstick and Tube

P4349629 Chrome Dipstick and Tube (Big Block)
C. Oil Pan Bolt Set

P4120613 Oil Pan Bolt Set (Hemi, Big Block,
Small Block)
D. Oil Pan Gasket

Oil Pan Gaskets for Big Block and Hemi applications. Note
that two are required for windage tray applications.
P4452099 Race Oil Pan Gasket — Set of Two
(Hemi, Big Block)
P3412049 Oil Pan Gasket — Sold Individually
(Hemi, Big Block)
C. D.
E. Oil Pickup and Screen Assemblies
Factory original reissued Oil Pickup and Screen Assemblies.
Standard pickups are 3/8", while race styles require hole
enlargement in stock blocks.
8 Quart, 3/8" Pipe, for Oil Pan P5007816
8 Quart, 1/2" Pipe, for Oil Pan P5007816
6 Quart, 3/8" Pipe, for Oil Pan
P5007807AB (Big Block)
6 Quart, 3/8" Pipe (“RB” Engines)
6 Quart, 3/8" Pipe (“B” Engines)
E. F. P5249817 Oil Pickup and Screen Assembly —
6 Quart, 1/2" Pipe (“B” Engines)
6 Quart, 1/2" Pipe, Siamese-Bore,
Not Raised Cam (426 Hemi, “RB”)
Note: P4529564 does not fit the 440 Six Pak.
F. Oil Pressure Relief Spring

stock spring for high-performance applications. Delivers up
to 70 lbs. of oil pressure. Includes a cap and instructions.
P4286571 Oil Pressure Relief Spring (426 Hemi,
Big Block, Slant Six)
G. Valley Trays
G. Valley Trays keep the engine oil in the tappet chamber and
off the intake manifold.
P4876847 Valley Tray (“B” Engines, “RB” Engines
with Intake Manifold Spacers and Stage VI
Cylinder Heads)
P4876848 Valley Tray (“RB” Engines)
43
BIG BLOCK
A. Windage Trays
Windage Trays are designed to provide improved engine
lubrication by reducing the interior windage at higher engine
speed. Includes tray and two pan gaskets.

(Hemi and Big Block)
B. Oil Pump Assembly

in high-performance applications. A.
*P4286590 Oil Pump Assembly (Hemi and Big Block)
C. Distributor/Oil Pump Driveshaft

Gear Assemblies
Distributor/Oil Pump Driveshaft Gear Assemblies feature
hardened tip shaft with full radius blend from hex to round
and pinned gears.
P3412064 Distributor Drive Gear — Flat Tappet Cams,

Milodon Oil System (Hemi and Big Block)
P3571071 Distributor Drive Gear — Flat Tappet Cams
P3690875 Distributor Drive Gear — Roller Tappet.
Cams, Aluminum-Bronze Gear (Hemi and
Big Block)
P3690876 Distributor Drive Gear — Roller Tappet. B. C.
Cams, Aluminum-Bronze Gear, Milodon
System (Hemi, Big Block)
D. Tube and Peen Tool Package

Tube and Peen Tool Package block off oil to right-side tappet
bores. Required for race engines with high-lift roller cams.
*P4452812 Tube and Peen Tool Package (Hemi

and Big Block)
E. High-Performance Oil Filter

Filter is black with Mopar Performance Pentastar logo.

Black Finish (Hemi, Big Block, D. E.
F. Race Oil Filter

High-performance, heavy-duty race oil filter has a thicker
canister with high burst strength. Filter is black with Mopar
Performance Pentastar logo.

(Hemi, Big Block, Small Block)
G. Restoration Oil Filters

Mopar Performance has reissued these service replacement
oil filters, used in the 1960s and 1970s. The high-performance
white filter (P4529805) was recommended for use in
competition from 1965–74.
P4529187 Restoration Oil Filter (Hemi, Big Block, F. G.

Small Block)
P4529805 High-Performance Restoration Oil Filter
BIG BLOCK
A. Oil Pump Priming Shaft
Don’t fire up that engine without pre-lubing (priming) it
thoroughly with oil. Special hardened steel priming shaft
fits on any 3/8" or larger drill. Insert shaft into hole where
distributor fits. Pressurizes oil galleys to ensure against dry
starts and ruining your engine. Fits all V8 engines.
COOLING COMPONENTS
B. NEW! Radiator Cap
When you open the hood, it’s right there where everyone—
A. B. especially the judges—can see it. If your radiator cap is
more than ten years old or just looks bad, replace it with
this original equipment quality piece.
C. Aluminum Water Pump

This lightweight Aluminum Water Pump is fully assembled
and ready to install. It features an eight-blade impeller and
the same dimensions as the stock cast iron version, except
the housing is made of aluminum.
P5007643AB Aluminum Water Pump (Hemi and Big Block)
D. Aluminum Water Pump Housing

Aluminum Water Pump Housing has bosses for both Hemi
and Big Block engine applications (1968–78).
C.
P4286900 Aluminum Water Pump Housing
P2206445 Bracket for Alternator (Hemi and Big Block)
E. Water Pump Installation Kit

Water Pump Installation Kit includes water pump gasket,
pump housing gasket, plugs, water pump screws, and long
and short housing screws.
P5007449 Water Pump Installation Kit

F. Chrome Water Pump Housing Bolts

chrome bolts.
D. P5007621 Chrome Water Pump Housing Bolts

E. F.
45
BIG BLOCK
A. Chrome Water Neck
This high-quality chrome water neck is made of heavy-duty
material. Includes gasket and two chrome bolts.
P4286759 Chrome Water Neck (Through 1978

426 Hemi, Big Block, Small Block)
B. Thermostat
This heavy-duty Thermostat can handle increased heat
management duties in high-performance engines.
Replacement gasket included.
*P4876307 180° Thermostat (Hemi, Big Block)

A. B.
C. NEW! 4-Blade Fan
D. Viscous Fan Package

Engineers have determined through dyno-testing that this
viscous fan is the best replacement package. It provides
thermostatically controlled cooling, includes a lightweight
balanced fan, and takes the least amount of horsepower
from the engine. Offers up to 15 horsepower gain on typical
high-performance V8s. 15" fan blade, 3-1/4" deep.
P4120758 Viscous Fan Package (426 Hemi, C. D.

E. Restoration Radiator Cooling Fan Shrouds

These Restoration Radiator Cooling Fan Shrouds measure 26".
P2785434 Restoration Radiator Cooling Fan

Shroud (1967–69 426 Hemi, 383/440
Big Block B-Body)
P2998326 Restoration Radiator Cooling Fan
Shroud (1970–73 426 Hemi, 383/440
Big Block B- and E-Bodies)
F. Engine Paint
Mopar enamel Engine Paint is matched to O.E. colors to keep
P4120751 Race Hemi Orange Engine Paint (1964–65 E.

Race Hemi, 1962–64 Max Wedge)
P4120752 Turquoise Engine Paint (1962–71
Big Block except High-Performance,
1969–71 383/440 Big Block)
P4120753 Black Engine Paint (1981–93 2.2L and
1983–2000 318/360 Small Block)
P4349216 Street Hemi Orange Engine Paint
(1966–71 Hemi and 1970–71
High-Performance 340/383/440)
P4349218 Red Engine Paint (1964–69 273,
1968–69 340, 1964–69 360 Small Block)
P5007733 Hemi Restoration Orange Engine Paint
(1966–71 Street Hemi, 1969–1971
340/383/440)
F.
SMALL BLOCK
47
SMALL BLOCK
Great things come in small packages. When you need replacement parts for
That old saying was never more true your high-performance 340 or are looking
when it comes to describing the to upgrade a 318 or 360, Mopar has the
performance, durability, and reliability of factory parts to fit any application. After
Mopar small block engines. all, the best deserves only the best.
48
49
SMALL BLOCK
A. Stroker “LA” Style 406 Short Block
A new addition to the Mopar family of short block engines,
this Stroker 406 Short Block has all the power and reliability
you want. This Short Block does not come with Camshaft,
Timing Gear or Timing Set. You can order these parts
separately to match your engine application.
Note: Carbureted applications only.
Specifications:
• Remanufactured 360 “A” Engine Block
• Blocks are bored 0.020" oversize
• Properly clearanced Block and high-performance
Connecting Rods
• 4.00" stroke high-performance Cast Crankshaft
• Slightly shorter deck assures smooth gasket surface
• New Cast Aluminum Pistons and Moly Piston Rings
• New Engine Bearings
• Balanced as a pre-Magnum engine
• Requires the following components for proper balancing
(not included): Thin Crank Vibration Damper (P5007301),
Cast Crank Flywheel (P4529110), RWD Balance Weight
and Positioning Template Package (P4120241)
P5007840 Stroker “A” Carb 406 Short Block — Carbureted

P5007301 Thin Crank Vibration Damper (1971–92 360,
Short Blocks P4876906–08, P4876913)
P4529110 Cast Crank Flywheel — 130 Tooth
(1971–92 360 Small Block [not AMC],
5.9L Truck Magnum/Jeep Engines)
*P4120241 RWD Balance Weight and Positioning A.
Template Package (1971–92 Chrysler 360)
Note: Short Block Assemblies that change the emissions

performance of the vehicle may not be legal for use
on vehicles regulated for highway use in California
and other states.
ENGINE BLOCKS AND COMPONENTS

B. 340 Replacement Engine Block
Limited production of the original 340 Block has made it very
difficult to find one in good condition. Why take a chance
with a 30-year-old-plus block when you can buy a new
one? This new casting includes the original 340 production
casting part number with an “M” added at the end to
identify the Mopar 340 Block. The block has a few cosmetic
differences from the original 340 Block, but it is machined to
work with all 340 production components. Special features
include brand-new castings made from high nickel cast iron
for added strength (not a thin wall casting), 4-bolt main
bearing caps, and 340 journal size. It has thicker webbing
and pan rail (like the 1970 340 T/A version), a thicker deck
surface and thicker bore walls in major and minor thrust
directions. Block is rough bored at 3.900" to allow various
bore sizes, from 3.910" to 4.080" (finish bore and honing
required). Deck height is approximately 9.600". Requires
the use of oil filter (PN 05281090BA). The 340 Replacement
Block is ideal for restoration or where racing rules require a
340 block.
*P5007552 340 Replacement Engine Block —

Non-Siamese
B.
Note: Requires oil filter (PN 05281090BA). Not recommended for
use with roller tappets, and may require use of late 1970s 318
motor mount (left side).
SMALL BLOCK
A. Block Hardware Package

This Block Hardware Package includes all the necessary
dowels, plugs, bushings and keys, as well as core plugs,
rear cam bearing plug, drive gear bushing and head dowels.
P5249261 Block Hardware Package (Small Block)
B. Engine Teardown Gasket Set

Engine Teardown Gasket Set includes all gaskets needed for
complete engine teardown: oil pan, cylinder head, valve cover,
timing chain case cover, intake manifold and oil pump gaskets.
A. B. P4120692 Engine Teardown Gasket Set

(340/360 Small Block)
C. Core Plugs
Round, press-in brass engine block Core Plugs fit standard or
Mopar race cast iron blocks.
P5249706 Core Plugs
D. Main Bearing Cap Bolt Package

This Main Bearing Cap Bolt Package was engineered to
original factory specifications for repair and maintenance on
your engine package. Magna-Fluxed and hardness checked.
Includes the necessary hardware for a complete engine kit.
P4120096 Main Bearing Cap Bolt Package —

2-Bolt Application
C. D.
E. Connecting Rod Bolt & Nut Set
Made from high strength steel, these bolts are great
replacements in performance applications. Sold in complete
engine sets.
P4120097 “A” Engine - 3/8" diameter
E.
SMALL BLOCK ENGINE DISPLACEMENT (CUBIC INCHES)

BORE (IN INCHES)
STROKE 3.910 3.940 3.970 4.000 4.030 4.040 4.060 4.100 4.125 4.180 4.220
3.310 318 323 328 333 338 340 343 350 354 363 370
3.580 344 349 355 360 365 367 371 378 383 393 401
3.790 364 370 375 381 387 389 392 400 405 416 424
4.000 384 390 396 402 408 410 414 422 427 439 448
4.250 408 414 421 427 433 436 440 449 454 466 476
51
SMALL BLOCK
A. Forged Crankshafts
Surface hardened, forged 4340 steel crankshafts feature
radiused fillets at main and rod journals. 6-bolt flange,
requires balancing.
*P5007253 Forged Crankshaft —

3.58" Stroke (318/340 Mains)
*P5007255 Forged Crankshaft —
3.58" Stroke (360 Mains)
B. Cast Crankshafts
Special heavy-duty performance Cast Crankshafts with A.
radiused fillets feature 6-bolt pattern on the crank flange.
Requires balancing.
Note: 4.00" stroke cranks require clearancing on block.
*P5007256 Cast Crankshaft — 4.00" Stroke

(318/340 Main)
(360 Main Small Block, 5.9L Truck Magnum)
(318/340 Main)
(360 Main Small Block, 5.9L Truck Magnum)
Note: 4.00" stroke cranks require clearancing on block.
C. Crank Bolt Package B.

These heavy-duty and high-performance crank bolts are used
to attach the damper to the crank.
P5249557AB Crank Bolt Package — 2.25" Length

Aftermarket Dampers)
D. Crank Key Package

This Crank Key Package locates the crank sprocket on the
nose of the crank. Contains two keys.
P5249822 Crank Key Package (426 Hemi,

Big Block, Small Block, Slant Six)
VIBRATION DAMPERS C. D.
E. Vibration Damper
This steel Vibration Damper features a steel ring and a
universal 6-bolt front pulley mount pattern. SFI approved.
P5249690 Steel Vibration Damper (1967–91

273/318 Small Block, 1968–71 340
Small Block Forged Crank)
F. Thin Crank Vibration Dampers

These production style dampers are designed for all
production balanced Small Blocks. Not SFI approved.
P4452816 Thin Crank Vibration Damper —

Internally Balanced (1967–91 273/318,
1968–71 340 Forged Crank)
P5007301 Thin Crank Vibration Damper — E. F.
Externally Balanced (1971–92 360,
Short Blocks P4876906–08, P4876913)
SMALL BLOCK
A. Damper Degree Timing Tape
Improve timing accuracy with this timing tape package.
Marked in 90° increments. Self-adhesive strip adheres to
crank vibration damper for clear identification of marks.
Permits initial total spark advance up to 60° instead of
only 10°–15° as on chain case timing tab.
B. Oil Slinger
This Oil Slinger protects the front seal from excessive oil
contact. Forces lubricant oil into chain.
A. B. P5249636 Oil Slinger (Small Block)
ROLLER TIMING CHAIN AND

SPROCKETS
C. Double Roller Chain and Sprockets
High-strength Double Roller Chain and Sprockets for added
durability and decreased rotational friction versus production
silent chains. Kit includes Magna-Fluxed sprockets and roller
timing chain.

One Bolt, Three Matched Keyways
(Small Block, 5.2L/5.9L Dodge Truck/Jeep
Magnum Engines)
C. D. All-Out Race Chain and Sprockets

Matched sprockets and double roller chain for all-out race
applications. Kits feature three matched keyways to adjust
cam timing. Includes Magna-Fluxed sprockets and roller
timing chains.
*P5249131 Replacement Double Roller Chain (Cloyes

Race Application)
*P4876560 Oversize Race Chain and Sprockets —
0.010" Oversize
*P4876559 Oversize Race Chain and Sprockets —
0.005" Oversize
*P3690866 Standard Size Race Chain and Sprockets
E. Timing Chain Tensioner

This Timing Chain Tensioner stabilizes cam timing by
reducing timing chain slack. It can be used in place of
thrust plate P5249637.
D. E.
P5007709 Timing Chain Tensioner (Small Block
and 3.9L, 5.2L, 5.9L Dodge Truck/Jeep
Magnum Engines)
P4876700 Front Cover Gasket — for Short Deck

(9.00"–9.20") Race Blocks, Use with
Covers P4876631–32
P4876701 Front Cover Seal Retainer for Sand-Cast
Race Cover
P4876280 Front Cover Seal (426 Hemi, Big Block,
Small Block)
F.
SMALL BLOCK
A. Timing Chain Covers
Front Timing Chain Covers to fit your needs. Package includes
cover, seal, and gasket.
P4876377 Sand Cast Race Timing Chain Cover —

9.560" Deck Height (Small Block and V6)
P4876631 Sand Cast Race Timing Chain Cover —
9.00"–9.20" Deck, Standard Water
Pump (Small Block, V6)
B. Timing Chain Cover Chrome Bolt Package

chrome bolts. Mopar offers a complete set of chrome bolts
for timing chain covers. A. B.
P4529256 Timing Chain Cover Chrome Bolt Package

C. Purple Shaft Camshafts
Mopar Performance cams are designed and engineered
exclusively for your engine. A wide range of profiles is
available from mild to wild and bracket to all-out racing. All
Mopar Performance cams are designed, developed, dyno’d,
and track tested by engineers. These cams are developed
for increased power and rpm potential while maintaining
reliability and the best possible low-speed characteristics,
including torque and idle quality. These Purple Shaft cams
offer the best horsepower to dollar-spent value. Each cam
package contains the cam, cam lube, instruction sheet, and
tappets where indicated.
*P4452782 Hydraulic Camshaft
C.
HYDRAULIC CAMSHAFTS
Part Number Adv. Duration @ 0.50" O-Lap Centerline Lift Recom. Spring Basic RPM Applications and Comments
*P4452782 268/276 228/235 44 114 0.429"/0.444" P4120249 Idle–5500 1968–73 340 – factory original
*P4452992 280/280 238/238 60 110 0.474/0.474 P4120249 2000 – 5800 Mild comp w/ auto or 4 speed
*P4120231 284/284 241/241 68 108 0.484/0.484 P4120249 2000– 6000 Mild comp w/ auto or 4 speed
*P4120233 292/292 248/248 76 108 0.508/0.508 P5249847 2800– 6200 Street/Strip
D. Camshaft Bearings
P4876372 Camshaft Bearings — 48°, Babbitt Applications

P4876707 Camshaft Bearings — 48°, 50 mm Roller
Bearing Application (Aluminum “A” Engine)
P5007361 Camshaft Bearings — 48°, 60 mm Roller
Bearing Application
E. Camshaft Plate Kit

Camshaft Plate Kit is designed to take the thrust of the cam.
Includes the cam plate and all necessary bolts. D. E.
P5249637 Camshaft Plate Kit
SMALL BLOCK
A. Camshaft Sprocket Attaching Hardware
Use Camshaft Sprocket Attaching Hardware when a fuel pump
eccentric is used (includes washer).
P4529838 Camshaft Sprocket Attaching Hardware
B. Offset Camshaft Keys

For centerlining your camshaft, these hardened keys are color
coded in 1°, 2°, 3°, 4° and 5° increments. Production key is
used for zero offset.
*P4286500 Offset Camshaft Keys
A. B. C. Hydraulic Tappet
Sold individually.
P3614321 Hydraulic Tappet
D. Mechanical Tappet
Sold individually.
*P2843177 Mechanical Tappet — 0.005" Undersize
CYLINDER HEADS
E. “A” Engine Replacement Cylinder Head
Based on the Magnum R/T big-valve head design, these heads
are machined to fit 318/340/360 Mopar Small Block intake
manifolds made through 1991. Imagine the new combinations!
Outflows the original.
C. D.
*P5007950 “A” Engine Replacement Cylinder Head —
2.02" Intake, 1.625" Exhaust
“X” and “J” Casting 340/360 Heads
F. Big Port Commando Cylinder Head

Features stock intake bolt pattern for standard manifold,
and dual-drilled exhaust pattern for production or W2
exhaust. Utilizes W2/W5-type offset intake rockers, allowing
unrestricted port cross section from the intake flange to the
valve. Intake has an easy flow potential of over 300 cfm with
seat and chamber machining and minor porting, making it the
best value in small block power potential. Offset rockers allow
for the cross sectional area to take power to the next level, far
beyond the capabilities of standard layout heads. Compatible
with standard intake and exhaust, the Big Port Commando is
an easy choice for serious small block power.
E.
*P4876310 Big Port Commando Cylinder Head
F.
SMALL BLOCK
COMPLETE CYLINDER HEAD
ASSEMBLIES
Cast Iron and Aluminum Cylinder Head Assemblies for
street and strip applications — each cylinder head contains
valves, springs, seals, retainers and locks. Fully prepped and
assembled — ready to install right out of the box!
“Magnum” Aluminum Cylinder

Head Assembly
*P5153534 Magnum Aluminum Cylinder Head

Assembly — 1.92" Intake, 1.62" Exhaust
(1992 318, 360 Magnum, Current “R3”)
“LA” Replacement Style Cast Iron
*P5153533 “LA” Replacement Style Cast Iron Cylinder

Head Assembly — 2.02" Intake, 1.62"
Exhaust (1967–91 318, 340 and 360 “LA,”
Current “R3”)
“Magnum R/T” Cast Iron Big-Valve Cylinder

Head Assembly
*P5153532 Magnum R/T Cast Iron Big-Valve Cylinder

Head Assembly — 2.02" Intake, 1.62"
Exhaust (1992 318, 360 Magnum)
“Magnum R/T” Cast Iron Standard-Valve

Cylinder Head Assembly
*P5007145 Magnum R/T Cast Iron Standard-Valve

Cylinder Head Assembly — 1.92" Intake,
1.62" Exhaust (1992 318, 360 Magnum,
Current “R3”)
“Commando” Standard Port Cylinder

Head Assembly
*P5153535 Commando Standard Port Cylinder

Head Assembly — 1.92" Intake, 1.62" Exhaust
(1967–91 318, 340 and 360 “LA,” Current “R3”)
“Commando” Large Port Cylinder

Head Assembly
*P5153536 Commando Large Port Cylinder

Head Assembly — 2.02" Intake, 1.62" Exhaust
(1967–91 318, 340 and 360 “LA,” Current “R3”)
CYLINDER HEAD GASKETS

AND HARDWARE
A. Magnum Cylinder Head Conversion Components
Designed to allow the use of Magnum engine heads on
pre–1991 Small Block engines/blocks. Requires the use of
Magnum cylinder heads, hydraulic pushrods, Jeep tappets
(P4529220AB), and eight Magnum engine rocker arms
(P4876050), to oil rocker arms through tappet and pushrod.
P5007477 Hydraulic Pushrods — 7-5/8",

Set of 16 (1967–91 Small Block) A.
P4529220AB Hydraulic Tappet — Sold Individually
(Small Block)
P4876050 Rocker Arm Set — Single Cylinder
(5.9L Magnum Engines, Magnum Crate
Engines [not 4.7L])
SMALL BLOCK
A. Composition Material Cylinder Head Gaskets
Composition Material Cylinder Head Gaskets can be used
for replacement or competition applications up to 12.5:1
compression ratio (sold as an engine set). Small Block 4-bolt
pattern. They feature 0.040"–0.042" compressed thickness,
unless otherwise noted.

Gaskets — up to 4.060" Bore; 0.024"–
0.028" Compressed Thickness
Gaskets — up to 4.100" Bore (Small Block)
A. P4349557 Composition Material Cylinder Head
Gaskets — up to 4.060" Bore,
High Compression
Gasket — up to 4.060" Bore
Note: Low Compression Ratio Composition Material Head

Gasket Not recommended for compression ratios
over 10.5:1.
B. Head Bolt Sets

Head Bolt Sets include all head bolts and washers as required.

P4876759 Aluminum Commando Cylinder Head Bolt
Note: Set (Small Block, 5.2L/5.9L Dodge Truck/Jeep

Magnum Engines)
B.
C. Head Stud Kits
Kits contain studs, nuts and washers for changeover of stock
head bolts.
P5007912 Cylinder Head Stud Kit

(W9 Raised Port Cylinder Head)
(Aluminum Block, W9 Heads)
(“R” Blocks with W9 Heads)
D. Hardened Washer Sets

Hardened Washer Sets for use with head bolts and main
caps. Sold in sets of 20, unless otherwise noted.
P4120456 Hardened Washer Set — 3/8"

C. (Small Block, 5.2L/5.9L Dodge Truck/Jeep
Magnum Engines)
P4120459 Hardened Washer Set — 1/2"
(Small Block, 5.2L/5.9L Dodge Truck/Jeep
Magnum Engines)
E. NEW! 340 Exhaust Manifold Heat Shield—

Driver’s Side
Back after being out of service for over 30 years. This
Exhaust Manifold Heat Shield fits all 1968–70 340 engines
with the high-performance driver’s side exhaust manifold. It
protects the spark plug wire boot from coming into contact
with the manifold.
P2946105 340 Exhaust Manifold Heat Shield —

Driver’s Side
D.
57
SMALL BLOCK
VALVE COVERS AND HARDWARE
A. NEW! High-Performance PCV Valve
For you V8 owners with 4-bbl carburetors, Mopar now offers
a high-performance PCV valve. It looks just like the original,
but features a free-flow design to help performance V8s
breathe easier. Sold individually.
04343581 High-Performance PCV Valve (V8 4-bbl)
B. “As Cast” Aluminum Valve Cover Set

These Cast Aluminum Valve Covers are sold “as cast” so you
can set up the breathers the way you want them. There’s no
paint to remove if welding is done. Mopar Pentastar logo is A. B.
cast into each cover. Cast aluminum covers are more rigid
than stamped valve covers, to help prevent valve cover leaks.
Set includes two valve covers and two oil filler caps.
P5007612 “As Cast” Aluminum Valve Cover Set

P5249581 5-Bolt Gasket — Rubber with Steel
Shim Reinforcement
P4452089 Race Gaskets
C. Chrome Valve Cover Set

Dress up your engine compartment with a Mopar Chrome
Valve Cover Set. Includes valve cover and grommets. Quality
chrome plating. Stamped steel with Mopar Pentastar logo.
Does not include gaskets, screws or baffling.
P5007446 Chrome Valve Cover Set

P5249581 5-Bolt Gasket — Rubber with Steel C.
Shim Reinforcement
D. Polished Cast Aluminum Valve Cover Set

These Polished Cast Aluminum Valve Covers are perfect for
that show car engine look. They feature the Mopar Pentastar
logo and are polished to a chrome-like shine. Cast aluminum
covers are more rigid than stamped valve covers and help
prevent valve cover leaks. Set includes two valve covers,
baffle package and two oil filler caps.
P5007613 Polished Cast Aluminum Valve Cover Set

E. Wide Valve Cover Set

This Wide Valve Cover Set uses a stock production gasket.
Features reversed lip design that allows the cover to be D.
wider on the same gasket surface. The extra width allows
for larger valve springs and longer rocker arms. 5-bolt covers.
Valve covers feature Mopar Pentastar logo. Use with Stud
Package P4876676.
P4876124 Wide Valve Cover Set (Stock Production

Small Blocks and W2/W5/W7/W9 Flanges)
P5249581 5-Bolt Gasket — Rubber with Steel Shim
Reinforcement
F. Chrome Valve Cover Accessory Set

This Chrome Valve Cover Accessory Set includes 12 chrome-
plated screw and washer assemblies, one chrome-plated oil
filler cap, and two rubber grommets. Grommet Set can also
be purchased individually.
E. F.
P4120272 Chrome Valve Cover Accessory Set
P5007419 Chrome Valve Cover Grommet Set
58
SMALL BLOCK
A. Baffle and Screw Package
For cast aluminum valve covers only.
P5007052 Baffle and Screw Package (Big Block, Small

Block, Dodge Truck/Jeep Magnum Engines)
B. Valve Cover Retaining Screw Set

Valve Cover Retaining Screw Set includes 12 screws.
P5007053 Valve Cover Retaining Screw Set

C. Valve Cover Bolt Kit

A. B. Valve Cover Bolt Kit includes 12 chrome-plated bolts for
stamped steel and aluminum valve covers.
P5007458 Valve Cover Bolt Kit

D. Valve Cover Stud Attaching Kit

This Valve Cover Stud Attaching Kit is required for use with
W8 cast aluminum valve cover P4876699 (also fits P4876124).
P4876676 Valve Cover Stud Attaching Kit
E. Cast Aluminum Valve Cover Chrome Bolt Set

Designed for cast aluminum valve covers only. Set includes
20 bolts (10 per cover).
P5007620 Cast Aluminum Valve Cover Chrome Bolt

C. D. Set (Small Block, 5.2L/5.9L Dodge Truck/
Jeep Magnum Engines)
F. Cast Aluminum Valve Cover Grommet Set

Set of die-cast grommets to service cast aluminum valve
covers. Will work with black, polished or as-cast Mopar
Performance valve covers. Set includes one for PVC and one
that can be used for plug or opened for breather.
P5007921 Cast Aluminum Valve Cover Grommet Set

G. Chrome Breather Caps

Chrome Breather Caps for use with Mopar cast aluminum
valve covers. Use them to fill extra valve cover holes in cast
aluminum valve covers. Push-In Style Breather Cap requires
the use of Grommet Set P4529882.
E. F.
*P4120446 Chrome Breather Cap with Tube
*P4529880 Twist-On Bottom Vented Breather Cap (Big
Block, Small Block, Jeep Magnum Engines)
*P4529881 Push-In Style Breather Cap (Big Block,
Small Block, Jeep Magnum Engines)
*P4529882 Rubber Grommet — for Breather
Cap P4529881
G.
SMALL BLOCK
A. Valves
These stainless valves have swirl-polished underheads that
have no flat or ski jump areas. They feature a 3/8" stem and
one square groove.
*P4876397 Intake Valve — 1.88" Diameter, 4.98"

Stem Length (340/360 Small Block)
*P5249185 Intake Valve — 2.02" Diameter, 4.98"
*P5249187 Exhaust Valve — 1.60" Diameter, 4.97"
*P5249188 Exhaust Valve — 1.65" Diameter, 4.97"
A. B.
B. Race Valve Seals
These Race Valve Seals are sold in a set of 16.
P3690963 Race Valve Seals — 3/8" Stem Size,

0.530" Guide (Small Block)
C. Valve Seals
Made of high-temp Viton material, these Valve Seals feature
a full or semi-umbrella shape for best dual-purpose use. Helps
prevent oil seepage down valve guides. Not recommended for
use with dual valve springs. Sold in sets of 16.
P4120492 Valve Seals — 3/8" Stem Size (Small Block)
Note: Does not apply to 0.530" valve guide.
D. Valve Stem Lash Caps C. D.

These lash caps are 0.080" thick and fit between the end of the
valve and the rocker arm tip. They are made of hardened steel
for improved rocker tip durability. Larger area than stock valve tip
to help spread the rocker loads. Sold in sets of 16 pieces.
*P4120626 Valve Stem Lash Caps — 3/8" Stem (Small

E. Valve Keepers
Valve Keepers are made from hardened material. Single,
double and triple groove styles are available to meet your
application requirements. They feature a 3/8" valve stem
diameter. Available in 8° and 10° angles. They can be used E.
for restoration or performance applications. Sold as cylinder
head sets of 16 pieces. See chart for specs.

P4120620 Valve Keepers VALVE KEEPERS
P4120619 Valve Keepers Part Valve Stem Groove Retainers Sets
Number Angle Diameter
Note: Two sets are required for 225 Slant 6, 3.9L V6
and all V8 engines. P4120618 7° 3/8" Single P4452033, P4007178, stock 16 pieces
P4120619 8° 3/8" Double P4452033, P4007178, stock 16 pieces
P4120620 8° 3/8" Triple P4452033, P4007178, stock 16 pieces
P4286612 10° 3/8" Single P4120783, P4120785, P4286775 16 pieces
SMALL BLOCK
A. Valve Springs
High-pressure Valve Springs can be used on exhaust and
intake valves for all high-performance applications. They
feature a shorter fully compressed height and allow for
increased valve lift. Springs maintain spring load at higher
rpms. A must for high-performance cams. Sold individually.
See chart for specs.

A. B. P4007536 Valve Spring
VALVE SPRING RETAINERS
B. Valve Spring Retainers
Valve
Part Number Material Locks Valve Stem Installed Height These Valve Spring Retainers for Small Block engines are
Spring
available in two levels of performance: Chrome Moly for
*P4452033 Chrome Moly 7° 3/8" Single Standard heavy-duty applications, and Titanium for top-level race
performance. Sold individually. See chart for specs.
*P4452033 Valve Spring Retainer — Chrome Moly
*P4007178 Valve Spring Retainer — Titanium
*P4286775 Titanium 10° 5/16" Triple 0.060" increase *P4120785 Valve Spring Retainer — Titanium
*P4286775 Valve Spring Retainer — Titanium
VALVE SPRINGS
Part No. Inst. Ht. Description OD Wire Dia. Lift Range Material Retainer
P4286813 1.65"/1.70" Single/Damper 1.39" 0.185" 0.390"/0.450" Chrome Vandium P4452033, P4286573
P4120249 1.67"/1.70" Single/Damper 1.50" 0.206" 0.430"/0.500" Chrome Vandium P4452033
P3614542 1.67"/1.70" Dual/Damper 1.45" 0.185" 0.500"/0.610" Chrome Silicon P4452033, P4286573
P5249847 1.68"/1.70" Single/Damper 1.50" 0.207" 0.480"/0.535" Chrome Silicon P4452033

P4452769, P4529288,
P2806077 1.83"/1.86" Dual/Damper 1.52" 0.215" 0.500"/0.610" Chrome Vandium P4529288, P4120785
P5249848 1.86"/1.87" Single/Damper 1.55" 0.216" 0.480"/0.540" Chrome Silicon P4452769, P4289288
P4876064 1.86"/1.88" Dual/Damper 1.60" 0.216" 0.590"/0.640" Chrome Silicon P4529288, P4120785
P5249849 2.00"/2.02" Dual/Damper 1.55" 0.216" 0.650"/0.750" Chrome Silicon P4120785
P4007536 2.00"/2.02" Triple 1.62" 0.225" 0.640"/0.745" Chrome Silicon P4286775
SMALL BLOCK
ROCKER SHAFTS, SUPPORTS AND
HARDWARE
A. Rocker Shafts
*P4510636 Hard Chrome Steel Rocker Shaft —

Mechanical Valve Gear, On-Center
(Sold Individually)
P3577086 T/A Rocker Shaft — Mechanical Valve
Gear, On-Center (Sold Individually)
P4120589 Rocker Shaft — Mechanical Valve Gear,
Offset, Sold Individually (W2/W5 Heads)
B. Rocker Shaft Retainers and Bolts A. B.

Each kit contains previously hard-to-find hold-down retainers
and bolts necessary to secure both rocker shafts. These
retainers are manufactured to Mopar original equipment
specifications to assure high quality. For use on all cylinder
heads with cast-in rocker stands.
P4529740 Rocker Shaft Retainers and Bolts
C. Hydraulic Rocker Arm Packages

Hydraulic Rocker Arm Packages feature thicker cross-sectional
material in pushrod socket area for added durability. Each kit
includes 16 heavy-duty hydraulic rocker arms (eight right, eight
left), rocker shaft retainers and hold-down bolts. rocker shafts
not included.
*P4529742 Hydraulic Rocker Arm Package —

Standard Heads, 1.5 Ratio C.
1.5 Ratio, Right, Sold Individually
1.5 Ratio, Left, Sold Individually
D. Cast Iron/Ductile Iron Mechanical

Rocker Arm Package
These Cast Iron/Ductile Iron Mechanical Rocker Arm Package
includes 16 rocker arms, eight separator springs (includes Max
Wedge), adjusting screws and lock nuts. Features a mechanical
lash adjustment with lock nut and high-strength cast iron/ductile
iron rocker arms. Required with mechanical camshafts; can
be used with hydraulic camshafts. Rocker shafts not included.
Individually sold service rockers are also available.
*P4529738 Cast Iron/Ductile Iron Mechanical

D.
Rocker Arm Package — Standard Heads,
1.5 Ratio, Unbushed, to 6,000 rpm
Note: For clearance, high-ratio rockers may require grinding

on block and head.
E. Rocker Arm Adjusting Screw and Nut Set

Rocker Arm Adjusting Screw and Nut Set includes eight
screws and nuts.
P5007444AB Rocker Arm Adjusting Screw and Nut Set
Note: Two sets are required for V8 engines.
E.
SMALL BLOCK
INTAKE MANIFOLDS
A. Aluminum Dual Plane Intake — Six Pack
Based on the original 1970 340 Six Pack/Six Barrel version,
this manifold adds increased air flow over production
4-bbl units.
*P4529054 Aluminum Dual Plane Intake — Six Pack,

Rectangle Port (1967–91 Small Block)
B. Aluminum Dual Plane Intakes — 4-bbl

Based on the production 1968-70 cast iron 340 intake
manifold, this aluminum intake is substantially lighter with
increased air flow. Maintains production height.

4-bbl Carb (1967–91 Standard Heads)
4-bbl Carb (5.2L/5.9L Dodge Truck/Jeep
Magnum Engines)
A.
B.
SMALL BLOCK
INTAKE MANIFOLD HARDWARE
A. Bypass Hose
This Bypass Hose is designed to go from the intake manifold
to the water pump. Made of heavy-duty silicone rubber.
Includes two clamps.
P4876373 Bypass Hose (1970-91 Small Block)

P4876374 Intake Manifold Fitting — Adapts Bypass
Hose to Manifold (1970-91 Small Block)
B. Choke Seal
This Choke Seal is for dual plane production and aluminum
intake manifolds. Package includes the choke cup, gasket A.
and two screws. Does not include a choke.
P5249639 Choke Seal (Big Block, Small Block)
C. Intake Manifold Gasket and Heat

Block-Off Plate
Stainless steel Intake Manifold Heat Block-Off Plate keeps
exhaust heat from transferring to the intake manifold for a
cooler, denser fuel-air mixture.
P4286569 Intake Manifold Gasket and Heat

Block-Off Plate — 0.060" Thick,
with Heat Block-Off Plate
D. Intake Manifold Attaching Bolts

Package contains all bolts required to attach the intake
manifold to the cylinder heads. B.
P4876771 Intake Manifold Attaching Bolts

(1967–91 Small Block)
0.060" Thick, with Heat Block-Off Plate
C.
D.
64
SMALL BLOCK
OILING COMPONENTS
A. Oil Pans
Factory engineered and approved oil pan, drain plug
and washer. Center sump style is used on passenger car
applications, while the rear sump style is used for pickups.
Windage trays may be used if desired.

(360 Small Block)
(360 Small Block)
A. (273, 318, 340 Small Block)
(273, 318, 340 Small Block)
B. Chrome Dipstick and Tube
P4349628 Chrome Dipstick and Tube — Center Sump

Pan (Small Block Passenger Cars)
C. Oil Pan Bolt Set
P4120613 Oil Pan Bolt Set
D. Oil Pan Gaskets
P4007572 Oil Pan Gaskets — Reusable

(318/340 Small Block)
B. C. P5007631 Oil Pan Gasket — One Piece
(Aluminum “A” Engines)
P4007573 Oil Pan Gasket (360 Small Block)
P4452097 Oil Pan Gasket (1970–90 318/340
Small Block and “X” Block)
P4452093 Race Oil Pan Gasket (360 Small Block)
E. Oil Pickup and Screen Assembly

Factory original reissued Oil Pickup and Screen Assembly.
Standard pickups are 3/8".

Center Sump Pans P5249059 and
P5249061 (Small Block)
D.
E.
65
SMALL BLOCK
A. Oil Pressure Relief Spring
stock spring for high-performance applications. Delivers up to
70 lbs. of oil pressure. Includes a cap and instructions.
P3690944 Oil Pressure Relief Spring

(Small Block, 2.2L/2.5L, 3.9L V6)
B. Windage Tray Package

Designed to provide improved engine lubrication by reducing
the interior windage at higher engine speeds (adds 5–7
horsepower). Package includes tray and mounting hardware
(mounting hardware is also available separately).
A. B.
P4529790 Windage Tray Package (318, 340,
360 Small Block)
P3690939 Windage Tray Mounting Hardware
(318, 340, 360 Small Block)
C. Oil Pump Assembly

in high-performance applications.
*P4286589 Oil Pump Assembly (Small Block and 3.9L V6)
D. Oil Pump Kit

Avoid oil starvation with this high-performance Oil Pump
Kit. Increases oil flow capacity when using stock pump and
oil pan. Does not require a special deep pan. Includes pump
cover, rotors and attaching screws. Installs easily. C. D.
*P5249620 Oil Pump Kit
Note: Modification required with production pans.
E. Distributor/Oil Pump Driveshaft

Gear Assemblies
Features a hardened tip shaft with full radius blend from
hex to round and pinned gear.
P3690715 Distributor/Oil Pump Driveshaft

Gear Assembly
P3690874 Distributor/Oil Pump Driveshaft
Gear Assembly — Billet Roller Cam,
Aluminum-Bronze Gear
F. High-Performance Oil Filter E. F.

Filter is black with Mopar Pentastar logo.

Black Finish (426 Hemi, Big Block,
G. Race Oil Filter

High-performance, heavy-duty race oil filter has a thicker
canister with high burst strength. Each filter is black with
Mopar Pentastar logo.

G.
SMALL BLOCK
A. Restoration Oil Filters
Mopar Performance has reissued these service replacement
oil filters, used in the 1960s and 1970s. The high-performance
white filter (P4529805) was recommended for use in
competition from 1965–74.

P4529187 Restoration Oil Filter (426 Hemi,

P4529805 High-Performance Restoration Oil Filter
A. B.
B. Right Angle Oil Filter Adapter Kit
Right Angle Oil Filter Adapter Kit allows 90° rotation of the
oil filter. Made of aluminum, it provides necessary clearance
for headers, engine swaps, etc. Filter not included.
*P5249624 Right Angle Oil Filter Adapter Kit

*P5007515 Oil Filter Adapter Mounting Screw
*P5249320 Oil Filter Adapter Gasket Set —
Services Oil Filter Adapter P5249624
C. Oil Pump Priming Shaft

Don’t fire up that engine without pre-lubing (priming) it
thoroughly with oil. Special hardened steel priming shaft
fits on any 3/8" or larger drill. Insert shaft into hole where
distributor fits. Pressurizes oil galleys to prevent dry starts
that could ruin your engine.
C. D.
COOLING COMPONENTS
D. NEW! Radiator Cap
When you open the hood, it’s right there where everyone can
see it. If your radiator cap is more than ten years old or just
looks bad, replace it with this original equipment quality piece.
E. Aluminum Water Pumps

Aluminum Water Pumps feature basic high flow designs. The
6-blade pump is recommended for use with cast iron cylinder
heads and drag racing applications. The 8-blade pump is
recommended for use with aluminum cylinder heads and
circle track applications. Passenger side lower hose inlet.
P5249558 Aluminum Water Pump — 6-Blade

P5249559 Aluminum Water Pump — 8-Blade,
Increased Flow
E.
SMALL BLOCK
A. Water Pump Chrome Bolt Package
chrome bolts.
P4529256 Water Pump Chrome Bolt Package
B. Chrome Water Necks

These high-quality Chrome Water Necks are made of
heavy-duty material. Includes gasket and two chrome bolts.
P4286759 Chrome Water Neck (Up to 1978)

P4452025 Chrome Water Neck (1979–91)
C. NEW! 4-Blade Fan A. B.

D. Viscous Fan Package

Engineers have determined through dyno testing that Mopar’s
Viscous Fan Package is the best replacement. It provides
thermostatically controlled cooling, includes a lightweight
balanced fan, and takes the least amount of horsepower
from the engine. Offers up to 15 horsepower gain on typical
high-performance V8s. 15" fan blade, 3-1/4" deep.
P4120758 Viscous Fan Package (426 Hemi,

C.
E. Thermostats
Heavy-duty Thermostats can handle increased heat
management duties in high-performance engines.
Each one comes with a replacement gasket.
*P4876307 180° Thermostat (Up to 1978 426 Hemi,

Big Block, Small Block, Slant Six)
*P4876308 195° Thermostat (1979 and Later
F. Engine Paint
Mopar enamel engine paint is matched to O.E. colors to keep
P4120751 Race Hemi Orange Engine Paint (1964–65

D.
Race Hemi, 1962–64 Max Wedge)
P4120752 Turquoise Engine Paint (1962–71
Big Block [except High-Performance],
1969–71 383/440 Big Block)
P4120753 Black Engine Paint (1981–93 2.2L and
1983–2000 318/360 Small Block)
P4349216 Street Hemi Orange Engine Paint
(1966–71 Hemi and 1970–71 High
Performance 340/383/440)
P4349217 Blue Engine Paint (All 1972–83
Engines Except 2.2L and 1964–69 318)
P4349218 Red Engine Paint (1964–69 273,
1968–69 340, 1964–69 360 Small Block)
P5007733 Hemi Restoration Orange Engine Paint
(1966–71 Street Hemi, 1969–1971
340/383/440)
E. F.
FUEL SYSTEM
69
70
Whether you’re performing routine maintenance or doing a complete
POWER UP!
vital fuel system parts, Mopar has what you need to keep your fuel delivery
restoration job, don’t overlook your car’s fuel system. If you’re like most system free flowing. From high-volume fuel pumps and carb rebuild parts to
enthusiasts, you muscle car is not your daily driver. Or in some cases you’re Six Pack and Hemi carburetor and air cleaners, don’t scrimp when it comes
in the middle of a project and may have old or contaminated fuel in the system. to your pride and joy. Remember, a 426 Hemi or a 440 Six Pack with vapor
Either way, this wrecks havoc on many fuel and rubber components, and that lock sputtering down the track at the Mopar Nationals is not cool. Laying
will definitely cause you grief down the road. So when it comes to replacing down a 50-foot patch of rubber from a 25 mph roll is!
71
FUEL SYSTEM
CARBURETORS
A. Holley Cross Ram Carburetors

Holley Carburetors were the “go fast” choice for the
legendary Super Stock 426 Hemi engine. Mopar brings back
these original equipment Holley carbs for 1964, 1965 and
1968 Race Hemis. These are exact reissues of the original
carburetors. Airflow is 770 cfm.
*P4452778 Cross Ram Carburetor — Right Hand

(1964–65, 1968 Race 426 Hemi)
*P4452779 Cross Ram Carburetor — Left Hand
(1964–65, 1968 Race 426 Hemi)
A. B.
B. Cross Ram Carburetor Air Horns
For use with Holley Hemi Cross Ram Carburetors. Perfect
for Super Stock competition or restoration. Sold as a pair;
includes front and rear.
*P5007809 Air Horns (426 Hemi)
C. Holley Universal Carburetor

Features universal calibration, a manual choke and center-
hung bowls. Vacuum secondary.
*P4349228 Holley Universal Carburetor —

R3310 - 750 cfm (Big Block and Small Block)
CARBURETOR HARDWARE
C. D.
D. Tall Throttle Bracket
This Tall Throttle Bracket is used to attach the throttle cable
to Mopar M1® single plane intake applications or when using
a 1" carb spacer.
P4510318 Tall Throttle Bracket (Big Block)
E. Carburetor Kickdown Bracket

For use with automatic transmission kickdown cable
P4510646. Refer to Automatic Transmission section for
more information.
P4510319 Carburetor Kickdown Bracket (Big Block)
F. Cross Ram Linkage

For use with the Hemi Cross Ram Intake Manifold (P5007534)
and Holly Carburetors (P4452778 and P4452779). Refer to E. F.
Hemi section for more information.
P4510635 Cross Ram Linkage (426 Hemi)
G. Tall Return Spring Bracket

This Tall Return Spring Bracket is for use on Mopar M1® single
plane intake applications or when using a 1" carb spacer.
P4510646 Tall Return Spring Bracket (Big Block)
H. Thin Carburetor Adapter

Designed with air/fuel flow technologies in mind versus ease
of machining. Tested and used by top engine builders, this
adapter is only 1/16" thick and allows the use of square bore
carburetors on spread bore manifolds.
*P5007869 Thin Carburetor Adapter (Big Block G. H.

and Small Block)
FUEL SYSTEM
A. Accelerator Return Spring Bracket
Designed for Magnum crate engines with 4-bbl carburetor
intake manifolds. Developed to hold accelerator pedal return
spring in proper relationship to carburetor.
P4876313 Accelerator Return Spring Bracket (4-bbl 300,

380, 395, 435 Magnum Crate Engines)
B. Cable Mounting Bracket

Bracket is designed to hold the stock throttle cable to
the Mopar Magnum intake in proper relationship to the
carburetor. Includes hardware.
A. B. P4876850 Cable Mounting Bracket (Magnum 300, 380,

395, 435 Crate Engines with Carburetor)
C. Holley Service Gasket Set

Includes everything required to service and performance-tune
your Holley carburetor. Package includes only the necessary
parts for proper servicing of the following: primary bowl,
primary metering block, secondary bowl, secondary metering
block/plate gaskets, required bowl screw O-rings, and fuel
transfer tube O-rings.
*P4349304 Holley Service Gasket Set —

2-bbl, R4412 and 7448 (340/440/Hemi
Six Pack, Holley Cross Ram)
D. Hemi Throttle Cable

Mopar offers this performance Throttle Cable for Street Hemi
C. D. and regular applications. Includes the retaining clip and a
plug to finish the installation.
P4529112 Throttle Cable (1968–70 Hemi B-Body)
SIX PACK
Some of the fastest vehicles of the “Muscle Car” era were
Six Packs. Mopar now offers the components to restore or
build your own Six Pack car.
E. Six Pack Holley Carburetors

Holley Carburetors are exact reissues of the original
equipment Six Pack. Order one center and two outboard
carburetors to match your engine.
*P4349235 Holley Carburetor — Center (1969–70

Big Block Six Pack)
*P4349236 Holley Carburetor — Outboard (1969–70
“RB” Six Pack)
*P4349237 Holley Carburetor — Center (1971 “RB”
Six Pack MTX)
*P4349238 Holley Carburetor — Outboard (1971
“RB” Six Pack)
*P4349239 Holley Carburetor — Outboard (“B” Six Pack
and Small Block Six Pack)
*P4349241 Holley Carburetor — Center (Small Block
Six Pack ATX)
Note: Six Pack “A” engines use Intake Manifold P4529054. Six
Pack “RB” engines use Intake Manifold P4529056. Refer to the
Big Block and Small Block sections for more information.
E.
FUEL SYSTEM
A. Secondary Diaphragm Set
For use with Six Pack Holley 2-bbl outboard carburetors.
Sold individually.
P4349321 Secondary Diaphragm Set (Six Pack)
B. Six Pack Gasket Set

Includes O.E. gaskets made exactly the way they were
produced in the early 1970s. Set includes three premium
quality air cleaner and carburetor-to-manifold gaskets.
Fits all 6-bbl applications.
P4529060 Gasket Set (Six Pack)

A. B.
C. Six Pack Choke Thermostat Assembly
Reproduction O.E. Choke Thermostat Assembly. Fits all
production 6-bbl applications.
P4529185 Choke Thermostat Assembly (Six Pack)
D. Six Pack Fuel Line Kit

This exact reproduction of O.E. Six Pack fuel lines includes
two fuel tees and four fuel tubes.
P4529264 Fuel Line Kit (Six Pack)
E. Six Pack Installation Kits

Mopar carries a full line of 6-bbl components for both Small
Block and Big Block applications, right down to these Six
Pack Installation Kits. Kits include throttle cables, fuel lines,
coil brackets, linkage kit, choke, nuts, springs and washers. C. D.
Buy the 6-bbl carburetors, manifold and air cleaner, then
install them with this complete O.E. reproduction kit.
P4529058 Six Pack Installation Kit (Small Block)

P4529059 Six Pack Installation Kit (Big Block)
F. Six Pack Linkage Kit

Perfect for repair or restoration projects, this kit includes
front carburetor rod, rear carburetor rod, front and rear clips,
adjusting pivot, throttle cable, bolt, nut, clip, and washer
assembly.
P4529061 Six Pack Linkage Kit
G. Six Pack Throttle Cable

Includes a retaining clip and plug to finish the installation.
E. F.
P4529111 Throttle Cable (1971 Six Pack B-Body)
H. Six Pack Air Cleaner Lids

Mopar carries all the components you need to rebuild a stock
6-bbl setup. Now top it all off with a Mopar air cleaner lid.
Designed and produced to factory specs for the perfect finish
to every Six Pack or 6-bbl application.
P2946393 Orange Air Cleaner Lid (Six Pack)

P4529748 Chrome Air Cleaner Lid (Six Pack)
G. H.
74
FUEL SYSTEM
A. Six Pack Air Cleaner Assembly Kits
These low-profile, high-flow air cleaners top off the Six Pack
system. Kits include metal base, orange lid, studs, nuts,
gaskets and air filter. They were designed specifically for
1970–71 B- and E-Body vehicles, but they can be used for
other vehicle applications as well.
P4529057AB Air Cleaner Assembly Kit — Non-Cold Air

(Six Pack)
P5007737 Air Cleaner Assembly Kit — Cold Air
(1970 440 Six Pack with Air Grabber or
Ramcharger Hood Scoop)
A. B. B. NEW! Air Cleaner Wing Nut

Judges notice everything, right down to the wing nut on your
air cleaner. This exact factory reproduction guarantees you
won’t lose valuable judging points the next time you’re at the
Mopar Nationals. Sold individually.
P4532033 Air Cleaner Wing Nut
C. Restoration Air Filter Element

This O.E. Restoration Air Filter Element is designed for
Six Pack and Hemi applications.
P4529965AB Air Filter (Resto Six Pack and Hemi)
MECHANICAL FUEL PUMPS AND

HARDWARE
C. D.
D. Mechanical Fuel Pumps
These Mechanical Fuel Pumps provide higher delivery rate
than stock at 80 gph @ 8.7 psi.
*P4007039AB Mechanical Fuel Pump (426 Hemi

and Big Block)
*P4007040 Mechanical Fuel Pump (Small Block)
E. Fuel Pump Pushrod Kit

Fuel Pump Pushrod Kit includes pushrod and access plug.
*P5249569 Fuel Pump Pushrod Kit (426 Hemi

and Big Block)
F. Moly-Coated Fuel Pump Eccentric

The moly coating on this Fuel Pump Eccentric significantly
E. F. reduces friction and wear for improved performance.
*P4120484 Moly-Coated Fuel Pump Eccentric

(Small Block)
ELECTRIC FUEL PUMPS AND

HARDWARE
G. Carter Electric Fuel Pump
This high-volume Electric Fuel Pump provides a delivery rate
of 72 gph @ 7.0 psi.
*P4007038 Carter Electric Fuel Pump
H. Chrome Fuel Pump Block-Off Plate

This Chrome Fuel Pump Block-Off Plate covers the hole left
after removing a mechanical fuel pump and replacing it with
G. H.
an electric pump. Gasket included.
*P5007546 Chrome Fuel Pump Block-Off Plate
FUEL SYSTEM
AIR INTAKE SYSTEMS
A. Cast Air Cleaner Assembly
This Cast Air Cleaner Assembly features a black cast
aluminum lid with the Mopar Pentastar logo, to match the
style of the cast aluminum Mopar valve covers. Includes
12-3/4" element.
*P5249807 Cast Air Cleaner Assembly (Hemi, Big Block,

Small Block, 5.2L/5.9L Dodge Truck/Jeep
Magnum Engines)
B. Chrome Replacement Air Cleaners

These original-style (unsilenced) Chrome Replacement Air A.
Cleaners are available with or without a breather tube. All
air cleaner packages come with a base plate, filter element,
base-to-carb gasket, air cleaner stud and chrome-plated wing
nut. These air cleaners provide better airflow to help produce
more horsepower than most aftermarket air cleaners. To top
off your air cleaner, add one of Mopar’s original style engine
identification plates.
*P4529002 Chrome Replacement Air Cleaner —

without Breather Tube (383/440 Big Block,
340 Small Block)
*P4529025 Chrome Replacement Air Cleaner —
with Breather Tube (383/440 Big Block,
340 Small Block)
C. Engine ID Plates
Most cars equipped with 340, 383 or 440 engines rolled out B.
of the assembly plant with an Engine Identification Plate on
top of the air cleaner. Mopar offers 16 different original-style
plates to cover all engines that were available during the
muscle car era. The proper selection of engine ID plates is
as follows: 1967–68 Red; 1969–71 Orange. Plates to cover
engines that were not available in the 1960s and 1970s are
also available (318 4-bbl, 360 4-bbl, 440 4-bbl, Hemi 4-bbl,
and 360 Magnum).
P4529071 Engine ID Plate — Orange (440 Magnum)

P4529072 Engine ID Plate — Red (440 Magnum)
P4529073 Engine ID Plate — Orange
(383 Road Runner)
P4529074 Engine ID Plate — Red (383 Road Runner)
P4529075 Engine ID Plate — Red (383 4-bbl)
P4529076 Engine ID Plate — Red (Commando 383)
(Chrysler TNT 440)
P4529078 Engine ID Plate — Red (Chrysler TNT 440)
(440 Super Commando)
P4529080 Engine ID Plate — Red
(440 Super Commando)
(Super Commando 383)
P4529082 Engine ID Plate — Red
(Super Commando 383)
P4529083 Engine ID Plate — Orange (340 4-bbl)
P4529084 Engine ID Plate — Red (340 4-bbl)
P4529086 Engine ID Plate — Red (383 Magnum)
P4876416 Engine ID Plate — Orange (360 4-bbl) C.
P4876448 Engine ID Plate — Orange (Hemi 4-bbl)
IGNITION
77
LET’S GET IT STARTED
What’s more satisfying than the roar of a Hemi or Max Wedge engine as it comes to life? To ensure your classic muscle
car engine fires up every time, check out these Mopar ignition system components. This wide array of ignition parts will not
only help your engine start more easily, but also keep it running more efficiently. After all, performance begins when your
engine starts—so let Mopar ignition systems handle the job.
78
79
IGNITION
AND ELECTRONICS
DISTRIBUTORS AND HARDWARE
A. Vacuum Advance Electronic Distributors
These Vacuum Advance Electronic Distributors feature a
high-performance advance curve and an adjustable vacuum
advance unit. Includes cap and rotor.
*P3690430 Vacuum Advance Electronic Distributor

(Small Block)
(383/400 Big Block)
(426 Hemi, 413/426W/440 Big Block)
A.
B. Chrome Distributor Hold-Down Clamps
Under the hood every detail matters, and chrome is the
perfect enhancement. Add the detail of a heavy-duty Chrome
Distributor Hold-Down Clamp with chrome-plated bolts. Sold
individually.
P4349278 Chrome Distributor Hold-Down Clamp

(Small Block)
P4349279 Chrome Distributor Hold-Down Clamp
C. Distributor Adapter Set

Adapts “RB”/Hemi engine distributor to “B” engines.
P3690275 Distributor Adapter Set (“B” Engines)
D. Distributor Advance Weight Springs B. C.

Use these Distributor Advance Weight Springs to convert a
stock distributor to a quick advance curve. Package contains
two springs.
P2932675 Distributor Advance Weight Springs
E. Distributor Cap and Rotor Sets
*P4120886 Distributor Cap and Rotor Set —

Mechanical Tach Drive Distributor
*P5007856 Distributor Cap and Rotor Set —
for Distributors P3690430, P3690432
F. Intermediate Shaft Bushing D. E.

P1737725 Intermediate Shaft Bushing (V6/V8)
G. Original Replacement Distributor Cap

Replacement for the original tan-colored distributor cap used
in Chrysler high-performance V8 muscle cars of the late
1960s and early 1970s. (Sold individually.)
P4529791 Original Replacement Distributor Cap

F. G.
IGNITION
AND ELECTRONICS
A. Pickup Coil and Lead Assembly
The Pickup Coil and Lead Assembly services electronic and
mechanical tach drive distributors.
*P4007985 Pickup Coil and Lead Assembly
B. NEW! Ignition Switch

If your ignition switch needs replacing, don’t install an old,
used piece. For peace of mind, replace it with a brand-
new unit from Mopar. This ignition switch is an exact
reproduction, and it perfectly replaces your old unit, with no
modifications necessary.
A. B. 03747092 Ignition Switch (1970–74 E-Body, 1970–76

A-Body and 1970–74 B- and C-Bodies)
ELECTRONIC IGNITION SYSTEMS

C. Electronic Ignition Conversion Kits
Mopar Performance can take care of your ignition problems
with an Electronic Ignition Conversion Kit with vacuum advance
distributor. These magnetic impulse ignition systems offer many
advantages over breaker-type ignition systems. They require less
frequent tune-ups, increase secondary voltage, improve starting,
eliminate irregular timing and dwell change with engine speed,
and increase plug life. Conversion packages are available to
convert old point-type ignitions to electronic ignitions. Packages
include vacuum advance electronic distributor with high-
performance advance curve, wiring harness, electronic control
unit, ballast resistor and installation instructions.
C.
*P3690426 Electronic Conversion Kit (Small Block)
*P3690427 Electronic Conversion Kit
(383/400 Big Block)
*P3690428 Electronic Conversion Kit
(426 Hemi, 413/426W/440 Big Block)
D. Orange Electronic Control Unit

The Orange Electronic Control Unit is for general high-
performance use up through 6,000 rpm.
*P4120505 Orange ECU (Hemi, Big Block, Small Block)
E. Chrome Electronic Control Unit

For a hotter spark, use this high-performance Chrome
Electronic Control Unit. For general high-performance use up
through 8,000 rpm.
D. E.
*P4120534 Chrome ECU (Hemi, Big Block, Small Block)
F. Super Gold Electronic Control Unit

The Super Gold Electronic Ignition Control Unit is the culmination
of several years of developing high-performance ignition
systems. Designed to outperform any ignition unit previously
offered to Mopar racers, it will handle the high current demand
by Race Coil P3690560, while keeping dwell variation to less
than 1°, from 1,000 to 10,000 rpm. Dwell is set for maximum
spark output at low or high engine speeds. The Super Gold ECU
provides outstanding performance, from idle to 12,000 rpm.
*P4120600 Super Gold ECU — Race Only

G. Control Unit Wiring Harness Kit

F. G.
*P3690152 Control Unit Wiring Harness Kit —
for Electronic Ignitions
IGNITION
AND ELECTRONICS
A. Restoration Battery Tray
Replace that rusty or missing battery tray with a new Mopar
restoration unit. Manufactured to exact specifications, this
tray comes e-coated to protect it from chemical and moisture
exposure. Fits all 1970–74 E-Body and 1971–74 B-Body
applications.
P2925322 Restoration Battery Tray

(1970–74 E-Body, 1971–74 B-Body)
B. NEW! Battery Hold-Down Nut

Your Battery Hold-Down Nut is old and rusty. You could try and
paint it, but that would subtract valuable judging points at the
local show ’n shine. Mopar now carries brand-new original
equipment-style nuts, so you don’t have to spend time searching A. B.
when you can be enjoying more time behind the wheel.
P3151736 Battery Hold Down Nut —

Fits all 1962–74 A-, B- and E-Bodies.
C. NEW! Battery Hold-Down Strap

03404404 Battery Hold Down Strap (1970-76 A-Body,
1970-73 B-Body and 1970-74 E-Body)
01828352 Battery Hold Down Strap (1963-69 A-Body,
1964-69 B-Body and 1968-73 C-Body)
D. NEW! Positive/Negative Battery Cables

Nothing is more embarrassing than having your muscle car
not start and having to ask your buddy for a jump at the end
of a cruise night. More often than not it’s the fact you forgot
C. D.
to replace those worn out and corroded battery cables. Make
sure to use original Mopar replacement battery cables when
working on your car’s electrical system.
02983649 Positive Battery Cable

1971-72 B-Body with 383, 400, 440 engine
1970-71 E-Body with 383, 440 engine
03764166 Positive Battery Cable
1972 B-Body, E-Body with 318, 340 engine
02983778 Negative Battery Cable
1970-72 B-Body, E-Body with 318, 340, 383,
400, 440 Engine
1970-72 A-Body with 318, 340 Engine
E. NEW! Turn Signal Switch Assembly

Often overlooked during a restoration, an old, worn out turn
signal switch can cause many electrical gremlins. This high-
quality assembly is an exact factory replacement and installs
easily with no modifications necessary. E.
04293102 Turn Signal Switch Assembly

(1970–76 A-, B-, and E-Bodies)
BALLAST RESISTORS
F. Resto Dual Ballast Resistor
The sharpest eyes will spot the correct ballast resistor on
a restoration project. This ballast resistor is a reissued
factory original, as used on 1971 and later points-style and
electronic ignitions with four-pin dual ballast resistors.
P4529795 Resto Dual Ballast Resistor
G. Ballast Resistors — Electronic Distributor

P2444641 Ballast Resistor — for Mechanical Advance
Distributor, Using P3690560 and P4876832– F. G.
33 Ignition Coils, 1/4 ohm
P5206436 Ballast Resistor — for P4120505 Orange
Box and Production or P4120889 Ignition
Coil, 1 ohm
IGNITION
AND ELECTRONICS
IGNITION WIRES AND SPARK PLUGS
A. Ignition Wire Sets — 7.5 mm, Pre-Cut
Package contains the high-tech style boot ends at both
the distributor and plug ends of the wire. These blue wires
are imprinted with the Mopar Performance name and the
cylinder number.
P4876775 Ignition Wire Set — 7.5 mm (426 Hemi)
B. Restoration Ignition Wire Sets

These restoration spark ignition wire sets are as close to
original as possible. Just like O.E., each carbon suppression
A. B. wire is created in the correct color and lettering, and includes
the correct spark plug boot. Each set contains eight ignition
secondary wires and one coil wire.
P4529792 Restoration Ignition Wire Set — Orange

(383/440 Big Block)
P4529797 Restoration Ignition Wire Set — Orange
(340 Small Block)
C. Ignition Wire Separator Set

Ignition Wire Separator Set includes eight pieces.
Fits 7.5 mm wire.
P4007667 Ignition Wire Separator Set
D. Hemi Insulator and Boot Kit

Hemi Insulator and Boot Kit services one cylinder. Eight
C. D.
required per engine. Use with 8 mm Ignition Wire Set
(P4529032).
P4120808 Hemi Insulator and Boot Kit
E. Plug Tube and Seal Set

Plug Tube and Seal Set includes eight special spark plug
tubes and tube seals, as used on production 426 Hemi
engines.
P4120294 Plug Tube and Seal Set (426, 472, 528 Hemi)
F. Spark Plug Wire Removal Tool

Here’s the tool you need to remove spark plug wires easily,
without pulling the wire out of the terminal end and boot.
E. F. P5249718 Spark Plug Wire Removal Tool
G. Universal Fit Spark Plug Wire Loom

Universal Fit Spark Plug Wire Loom works with 7–8 mm wire.
Includes four 1/4" mounting studs (20 tpi).
P5007481 Universal Fit Spark Plug Wire Loom
H. Spark Plugs
These Bosch Motorsports spark plugs are specifically
designed for the optimum performance of your Mopar
engine. Sold in sets of four.
P4876927 Spark Plug (Big Block)

P4876926 Spark Plugs (Hemi and Small Block)
G. H.
IGNITION
AND ELECTRONICS
IGNITION COILS
A. NEW! Restoration Ignition Coil
This is an exact reproduction of the original factory black unit,
right down to the vintage Mopar logo. If your coil is more than
ten years old, replace it with this brand-new piece.
02495531 Restoration Ignition Coil —

Black with Vintage Mopar Logo
(1964–78 Small Block, Big Block and Hemi)
B. Chrome Ignition Coil Bracket

Another underhood piece to dress up your engine
compartment. Includes bracket clamp screw. A. B.
P4286728 Chrome Ignition Coil Bracket (V8 and 6 cyl.)
C. Blaster Coils
These high-performance cylindrical Blaster Coils are oil-filled.
They feature a 100:1 turn ratio, threaded-stud primary
connection, and conventional “socket” style tower. They are
designed for high-performance street and race applications.
Note: Use 1/4 ohm Ballast Resistor P2444641 when used with
Ignition Kit P3690426, P3690427, or P3690428.
*P4876732 Blaster Coil — Black, for Controllers

P4876728–29 (V8)
*P4876733 Blaster Coil — Chrome, for Controllers
P4876728–29 and P4876731 (V8)
D. Race Coil C. D.
This Race Coil is specifically designed to be used with a race-only
electronic ignition kit. Not recommended for continued operation
at speeds below 3,000 rpm for periods of more than 30 minutes.
Note: Use 1/4 ohm Ballast Resistor P2444641.
*P3690560 Race Coil (Race V8)
E. Lightweight Starters
These specially-designed starter motors, with heavy-duty
features for V8 applications, need no adapters. Approximately
7 lbs. complete, these units are lighter than the previous
Mopar lightweight starter, half the weight of the original
1960–70s vintage production starter, and 1" shorter. May
require header/exhaust modifications on some applications.
P5007860 Lightweight Starter (426 Hemi, Big Block)

P5249644AB Lightweight Starter (Small Block) E.
VOLTAGE REGULATORS
F. Constant Output Voltage Regulators
To ensure your ignition and electrical systems can provide
maximum performance, install a Constant Output Voltage
Regulator. Voltage is held at a constant 13.5 volts. For race
applications only.
*P3690731 Constant Output Voltage Regulator

(1970 and newer V8 engines)
*P3690732 Constant Output Voltage Regulator
(Up to 1969 V8 engines)
G. O.E. Muscle Car Voltage Regulator

For restoration or repair, Mopar offers this factory reissue F. G.
voltage regulator, originally used on muscle cars in the
early 1970s. It is black with the original Mopar part number
imprinted in yellow. Contains modern electronics.
P4529794 O.E. Muscle Car Voltage Regulator (V8)
AUTOMATIC
TRANSMISSION
85
SHIFT INTO HIGH GEAR
Whether it’s a high-performance small block, ground-pounding don’t even think about using anything that doesn’t have the
big block, or legendary Chrysler Hemi, your transmission was name Mopar attached to it. To do otherwise could drive you
specially designed by Mopar engineers to handle the brute right back to the shop hoist.
force of your powerplant. When service parts are needed,
86
87
AUTOMATIC TRANSMISSION
SHIFT IMPROVEMENT PACKAGES
A. Dual Purpose Shift Improver Packages
Enjoy firmer, quicker shifts with these Dual Purpose Shift
Improver Packages. On 1971–86.5 RWD A-727/A-904
transmissions, the part-throttle kickdown is retained.
*P4007899 Shift Improver Package

(Up to 1986.5 A-904, A-998, A-999)
*P4349469AB Shift Improver Package
(Up to 1986.5 A-727)
B. Performance Shift Improver Packages

These packages offer firmer, quicker shifts for better A. B.
performance and quicker ETs. Packages come complete with
all necessary parts, spacer gaskets, pan gasket and simple
instructions. For serious performance/racer applications.
Non-lockup applications only.

(1962–70 A-727, 1971–73 A-904 6-cyl.)
(1971–73 A-727, 1971–73 A-904)
COMPONENTS
C. NEW! Speedometer Cable
When restoring your classic, why reinstall a speedometer cable
that’s 30-plus years old, when you can install a brand-new part C. D.
from Mopar? This original equipment-quality cable will provide
years of trouble-free operation and is easy to install.
04897646AA Speedometer Cable (A-, B- and E-Bodies)
D. NEW! Transmission Neutral Safety Switch

Fits A-727 and A-904 Torqueflite applications.
P2932820 Transmission Neutral Safety Switch —

1969–84 A-727/A-904 Transmissions
E. Neutral Safety Switch
P5007747 Neutral Safety Switch —

3-prong (1985 and up A-727/A-904)
DRIVE PLATES E. F.
F. RWD Torque Converter Flex Plates — 5/16" Bolts

Torque Converter Flex Plates for use with econo/lockup
torque converters.
P4876821 RWD Torque Converter Flex Plate —

6-Bolt Crank, 5/16" (Up to 1991 V8)
P5007378 RWD Torque Converter Flex Plate —
8-Bolt Crank, 5/16" (Hemi)
G. RWD Torque Converter Flex Plates — 7/16" Bolts

Torque Converter Flex Plates for use with high-performance
aftermarket 10" and 9" converters.
*P4529751 RWD Torque Converter Flex Plate —

SFI approved for use with 6-Bolt
Crank Flange G.
*P4529752 RWD Torque Converter Flex Plate —
SFI approved for use with 8-Bolt
Crank Flange
TRANSMISSION OVERHAUL KITS
Mopar has packaged all the necessary parts to rebuild and
restore your A-904/A-500 and A-727 transmission. Included
in each kit are rubber seals, gaskets, sealing rings, filter,
front flex band, and clutch plates.
A. Dual Purpose Transmission Overhaul Kits

These Transmission Overhaul Kits are intended for dual purpose
street/strip usage. Friction materials are factory quality, original
equipment parts manufactured through Raybestos.
Note: Low/Reverse band is not included, since wear is usually

minimal and does not requiring replacement.
P5007172 Dual Purpose Transmission

Overhaul Kit (A-727)
P5007568 Dual Purpose Transmission
Overhaul Kit (A-904/A-500)
Race Transmission Overhaul Kits (Not Pictured)

Race Transmission Overhaul Kits are recommended for drag
strip use only, and are distinguished from dual purpose kits
by the use of a more aggressive Kevlar®-lined front drum
flex band (steel drum only) and Raybestos Blue Plate Special
racing front and rear clutch plates. Blue Plate Special clutch
plate features and benefits include the following:
• High-strength steel to withstand high torque and horsepower
• High-strength matrix bonding resins (creates the blue color)
• Higher dynamic and static coefficients of friction
A. • Critical parts are handmade and 100% checked for
critical dimensions
• Higher torque and horsepower capacity free up
horsepower for improved acceleration and elapsed times
• Greater durability and minimal wear extends clutch life
• Faster and cleaner shifts
• Less shock during shifts
P5007171 Race Transmission Overhaul Kit (A-727)

P5007569 Race Transmission Overhaul Kit (A-904/A-500)
RWD TRANSMISSION PAN GASKET

AND HARDWARE
B. Chrome Bolt Attaching Package
Here’s a Chrome Bolt Attaching Package to dress
B. C. up your automatic transmission. Fits all automatic
transmission assemblies.
P4452785 Chrome Bolt Attaching Package

(A-904, A-727, A-500, A-518)
C. Transmission Plug and Cap Package

Transmission Plug and Cap Package contains plastic plugs
and caps to prevent unwanted dust and dirt from getting
into a transmission during storage or transport.
P4120280 Transmission Plug and Cap Package

(A-500, A-518, A-727, A-904, A-998, A-999)
D. Automatic Transmission Gasket and Filter Package

All the parts you need for changing the fluid in your
automatic transmission.
D.
P4120461 Automatic Transmission Gasket and
Filter Package (A-727)
P3690855 Transmission Gasket (A-727)
89
TORQUE CONVERTERS AND HARDWARE
A. Torque Converters
These performance Torque Converters have higher stall
speeds than production units, but aren’t as expensive as
aftermarket race units. The higher stall speed offers better
throttle response and a quicker launch.
P4529403AB 145K Lockup Torque Converter (1967–92 A-904)

P4876947AB 145K Lockup Torque Converter (A-727)
P5007290AB 166K Lockup Torque Converter (1967–92 A-904)
P5007297AB 166K Lockup Torque Converter (A-727)
P4876805AB 145K Econo Torque Converter (1967–92 A-904)
P4876870AB 145K Econo Torque Converter (A-727) A.
P4876878AB 166K Econo Torque Converter (A-727)
P4876879AB 175K Econo Torque Converter (A-727)
B. Flex Plate Screw Packages

Flex Plate Screw Packages include crank screws (eight for 8-bolt
cranks; six for 6-bolt cranks) and four torque converter screws.
P4120464 Flex Plate Screw Package — 8-Bolt Crank,

7/16" Converter (Hemi, Big Block, Small
Block, Slant Six, 3.9L V6)
7/16" Converter (Hemi, Big Block, Small
5/16" Converter (Hemi, Big Block, Small B. C.
C. Balance Weight and Positioning Template Package

For use with externally balanced cast iron cranks. Designed for
RWD cast crank V8 engines. Will not work with Magnum engines.
*P4120241 Balance Weight and Positioning

Template Package (1971–91 440 Six Pack,
1971–92 360 [not AMC])
D. RWD Torque Converter Bolt Packages

These RWD Torque Converter Bolt Packages include four
bolts to attach the torque converter to the flex plate.
Available for both 8- and 6-cylinder engines.
P4529591 RWD Torque Converter Bolt Package —

5/16" (8- and 6-cylinder engines) D. E.
P4529592 RWD Torque Converter Bolt Package —
7/16" (8- and 6-cylinder engines)
TRANSMISSION COOLERS AND PANS

E. Heavy-Duty Transmission Cooler
This Heavy-Duty Transmission Cooler will keep the transmission in
your 1967–91 car or light truck from overheating when it performs
under heavier than normal driving conditions. Durable 3/4" line
construction and steel material make this an outstanding performer.
P4876916 Heavy-Duty Transmission Cooler —

7-1/2" W x 17" L x 3/4" D
F. Transmission Cooler
Help prevent transmission damage caused by overheating.
F.
Mopar Transmission Coolers feature 3/4" line construction
and steel material turbulator. Ideal for cars and light trucks
used for everyday transportation.
P4876915 Transmission Cooler — 5" W x 13" L x 3/4" D
TORQUE CONVERTERS APPLICATIONS

Hemi
5.2L Magnum 440 6-BBL and Heavy Rod
Slant 6, 3.9L V6 400, 440 Cast Crank
383, 440 Forged Crank 360 Cast Crank (1971-92)
General Desc. 273, 318, 340 Forged Crank 340 Cast Crank 1993–01 360 Magnum
145K, 166K Torque Converter
175K Torque Converter No extra weights Add P4120241 Add P5249843
All Race Torque Converter
Torque Converter Usage by Valve Lift Factor
A. Engine B. Valve Lift Torque Converter General Usage

Up to 0.499" 150K Dual Purpose
Hemi 0.500"–0.530" 166K General Bracket
0.531" and up 175K and up Serious Brackets
440 0.482"–0.520" 166K General Bracket
0.521" and up 175K Serious Brackets
C. D.
318/340 0.451"–0.481" 166K General Bracket
Torque Converter Usage by “K” Factor
Application 318/340 360 383/400 440
Stock — Performance 120–145K 120–145K 120–145K 120K
Street — Performance 166–175K 145–166K 166–175K 145–166K
Street — Strip 175K 166–175K 175K 166–175K
Bracket Race 175–230K 175–230K 175–200K 150–150K
250–265K 240–255K 250–265K 240–255K
Race
260–275K–W2 260–275K–W2
Note: 145K = 1900–2100 stall speed; 166K = 2250–2350 stall speed; 175 = 2400–2500 stall speed.
91
A. RWD Automatic Transmission Deep Pan Packages
Extra-capacity RWD Automatic Transmission Deep Pan
Packages improve the cooling and lubrication of critical
transmission components, which results in better shift
performance and longer component life. A new, redesigned
billet bolt-on spacer is provided to lower the fluid pickup.
Includes drain plug and extra hole for temperature gauge
(plug required if gauge is not used). Adds two quarts to sump.
P5007793AB Cast Aluminum Deep Pan Package (A-727)

P5007794AB Cast Aluminum Deep Pan Package (A-904)
P3690730AB Stamped Steel Deep Pan Package (A-727)
P4007886AB Stamped Steel Deep Pan Package
(A-904/A-999) A.
P4120161AB Chrome-Plated Deep Pan Package (A-727)
P4120162AB Chrome-Plated Deep Pan Package
(A-904/A-999)
B. Filter Extension Kit

For use with RWD Automatic Transmission Deep Pan
Packages. Kit contains one filter extension, one transmission
pan gasket, and one transmission fluid filter.
P5249321AB Filter Extension Package (A-727)
C. Front Clutch Piston Spring

When rebuilding your A-727 transmission, you should always
replace the Front Clutch Piston Spring. This spring provides
the right amount of tension to ensure firm upshifts and
prolonged clutch life. Sold individually.
B. C.
P2801243 Front Clutch Piston Spring
TRANSMISSION CLUTCHES
D. RWD Complete Clutch Kits
Dual-purpose performance A-904 (includes A-998, A-999 and
A-500) or A-727 transmissions can be fixed with these RWD
Complete Clutch Kits. All components are high-quality O.E.
parts designed for your transmission. Kits contain front and
rear discs, clutch plates and instructions.
P4529016 RWD Complete Clutch Kit (A-727)

P4529008 RWD Complete Clutch Kit (A-904/A-500)
E. RWD Rear Clutch Kit

We’ve packaged our heavy-duty, high-performance A-727
race clutch plates and discs into a practical kit. D. E.
P4529019 RWD Rear Clutch Kit — Race (A-727)
F. RWD Front Bands

Mopar takes the same high-quality, heavy-duty transmission
front bands found in our other complete A-904 and A-727
transmission kits, but packages them separately for your
convenience. Select for either dual-purpose or race applications.
P4529009 RWD Front Band — Dual Purpose

(A-904/A-500)
P4529017 RWD Front Band — Dual Purpose (A-727)
P4529012 RWD Front Band — Race (A-904/A-500)
P4529020 RWD Front Band — Race (A-727)
G. RWD Kickdown Lever

This special 5:1 ratio RWD Kickdown Lever can be used as a F. G.
replacement on the 426 Hemi transmission. Speeds up front band
actuation on other A-904 and A-727 transmissions to firm upshifts.
*P4529023AB Kickdown Lever (A-904/A-727)
MANUAL
TRANSMISSION
93
STICK WITH A WINNER
You know that feeling. Sitting there Now you can power shift with Since you prefer to shift it for yourself,
at the tree with your left hand on the confidence. Mopar manual it’s always best to stick with authentic
steering wheel and your right hand transmissions are legendary, especially restoration parts by Mopar. That
clenched firmly on the pistol grip stick — in high-performance applications. way, you’ll be certain to stick it to the
waiting for the lights to come down. competition every time.
94
95
MANUAL TRANSMISSION
FLYWHEELS AND HARDWARE
A. Race Steel Flywheel
This Race Steel Flywheel weighs 18-1/2 pounds and is
designed for use with a 10-1/2" clutch.
*P4876047 Race Steel Flywheel — 6-Bolt (Big Block,

Small Block)
B. Steel Replacement Flywheels

Steel Replacement Flywheels weigh 30 pounds and are
designed for use with a 10-1/2" clutch. Not SFI approved.
P4529142 Steel Flywheel — 6-Bolt, 130-Tooth A.

(Big Block, Small Block)
P4529143 Steel Flywheel — 8-Bolt, 130-Tooth
(Big Block, Small Block)
C. Flywheel Attaching Screw Set

This Flywheel Attaching Screw Set is ideal for Inline Six
and 90° V6 and V8 engines. It includes six crankshaft and
pressure plate bolts.
P4529113 Flywheel Attaching Screw Set —

6-Bolt (Inline Six, 90° V6 and V8)
CLUTCH LINKAGE
D. Clutch Fork Replacement Kits
Replacement kits for RWD manual transmission clutch forks. B. C.
Kits contain a clutch fork, clutch fork pivot and boot.
P4529451 Clutch Fork Replacement Kit — 12-1/2"

Approx. Length (Small Block A-Body)
Approx. Length (Small Block B- and
E-Bodies)
Approx. Length (“B” Engine B- and E-Bodies)
E. Clutch Linkage Shaft Service Kits

Each kit contains nylon bearings, snap rings, seals, washers,
lock springs, pivot ball studs and instructions.
P4529447 Clutch Linkage Shaft Service Kit (B- and

E-Bodies)
P4529489 Clutch Linkage Shaft Service Kit (A-Body) D.
F. Clutch Rod Repair Kits

Each kit contains a clutch rod, nuts, washers, springs, clips
and instructions.
P4529448 Clutch Rod Kit — 6.885" Overall Length

(Small Block A-Body)
(Small Block B- and E-Bodies)
(Big Block B- and E-Bodies)
E. F.
MANUAL TRANSMISSION
CLUTCH DISCS, PRESSURE PLATES
AND HARDWARE
A. Race Clutch Cover and Pressure Plate
Race Clutch Cover and Pressure Plate is super heavy-duty for
3,100 lbs. spring load.
P4529406 Race Clutch Cover and Pressure Plate —
10-1/2" (Hemi, Big Block, Small Block)
B. Muscle Car Pressure Plates
These pressure plates were designed as replacements for
early V8 muscle cars. Both are roller designs, similar to
original production units. Use with Muscle Car Clutch Discs.
A. B. P4529140 Muscle Car Pressure Plate — 10-1/2",
2,500 lb. Base (Dodge and Plymouth V8
Muscle Cars)
P4529141 Scalloped Muscle Car Pressure Plate —
11" (10.95"), 2,500 lb. Base (1970–72 Hemi
and Big Block)
C. Muscle Car Clutch Discs
These Muscle Car Clutch Discs are designed as replacements
for various Dodge and Plymouth V8 muscle cars. Use with
Muscle Car Pressure Plates P4529140 and P4529141.
P4529136 Muscle Car Clutch Disc — 10-1/2",
23-Spline (Dodge and Plymouth V8
Muscle Cars)
P4529137 Muscle Car Clutch Disc — 11" (10.95"),
Muscle Cars)
C. D. P4529138 Muscle Car Clutch Disc — 10-1/2",
Muscle Cars)
P4529139 Muscle Car Clutch Disc — 11" (10.95"),
Muscle Cars)
D. Street/Strip Pressure Plates
P4876919 Street/Strip Pressure Plate — 11" (10.95")
(426 Hemi, 440 Big Block)
P4876920 Street/Strip Pressure Plate — 10-1/2"
(426 Hemi, 440 Big Block, 340 Small Block)
Pilot Bearing (Not Pictured)
The Pilot Bearing should always be replaced when servicing the
clutch and throw-out bearing, or when installing a new clutch.
P5007051 Pilot Bearing (Big Block and Small Block)
SHIFTERS
E. Hurst Pistol Grip Shifters
Give your 4-speed Mopar muscle car that original look and
feel it deserves with these brand-new, factory-reissued pistol
grip shifters from Hurst.
Note: All pistol grip sticks are the bolt-on style and are designed
for use with Hurst Comp Plus Shifter part number 391–6769
(not available through Mopar).
P4510610 Hurst Pistol Grip Shifter (All 1968–69
Non-Console, 1970 B-Body Non-Console)
P4510611 Hurst Pistol Grip Shifter (1971–74 B-Body
Non-Console with Center Armrest)
P4510612 Hurst Pistol Grip Shifter (1970–74 E-Body,
1971-74 B-Body with Console)
E. P4510948 Hurst Pistol Grip Shifter (1970 B-Body
with Console)
P4510614 Hurst Pistol Grip Simulated Wood Grain Insert
97
MANUAL TRANSMISSION
A. NEW! Hurst Shifter
Whether you’re looking to replace your classic “push-in” style
handle Hurst shifter or simply want to upgrade, Mopar has the
original equipment-style piece you want. Built with all-new high
quality components, this beauty looks just like the original and fits
perfectly (no modifications required when used as a replacement).
04019122 Hurst Shifter (1968-74 B-Body, 1970-74 E-Body)
B. NEW! Shifter Boot

If your shifter boot is damaged, worn, or missing, we’ve got
you covered. This quality reproduction looks great and uses
the same materials as the original production unit.
A. B.
03467764 Shifter Boot (Dart, Demon, Duster)
P3467766 Shifter Boot (1970-74 `Cuda/Challenger,
1971-74 Road Runner/GTX and Charger)
MANUAL TRANSMISSION
COMPONENTS
C. NEW! Speedometer Cable
When restoring your classic, why reinstall speedometer cable
that’s 30-plus years old, when you can install a brand-new part
from Mopar? This original equipment-quality cable will provide
years of trouble-free operation and is easy to install.
04897646AA Speedometer Cable (A-, B- and E-Bodies)
D. RWD Clutch Release Roller Bearing

and Sleeve Assembly
This Roller Bearing and Sleeve Assembly applies to 4-speed C. D.
transmissions with 10.50" clutch. Fits only 18-spline input
shaft. It should be installed every time you replace your clutch.
P4529064 RWD Clutch Release Roller Bearing and

Sleeve Assembly
E. 4-Speed Gasket Kit

Complete rebuild kit for A-833 manual transmission. Includes
input seal, large rubber cone-style rear seal and all necessary
gaskets and seals.
P4510639 4-Speed Gasket Kit (A-833)
F. 4-Speed Front Bearing Retainers

Mopar has re-released these A-833 4-Speed Front Bearing
Retainers. Each package includes the retainer, retainer
gasket and input shaft seal. Bearing retainers are identified
E. F.
by their outside diameter (OD), attaching bolt circle diameter
(BC) and corresponding transmission input shaft.
P4529694 4-Speed Front Bearing Retainer — 4.35" OD,

3.70" BC, for 23-Spline Input Shaft (A-833)
G. Input Shaft Bearing Package

Original equipment Input Shaft Bearing Package for A-833
4-speed transmission includes bearing, snap ring, and gaskets.
P4529698 Input Shaft Bearing Package — 308 Bearing

(A-833) G. H.
H. RWD Offset Clutch Housing Dowel Package
This package contains dowels offset by 0.007", 0.014" and
0.021" (two each).
P4120383 RWD Offset Clutch Housing Dowel Package

98
REAR AXLE
99
100
POWER TO
THE PAVEMENT
Big power doesn’t do you any good if you can’t
effectively put it to the pavement. Mopar rear axle
parts are manufactured to original equipment
specifications, so you’re sure to achieve
maximum hook to the street without worrying
about your driveline parts.
101
DRIVETRAIN
UNIVERSAL JOINT AND YOKE KITS
A. Billet Yoke Kits

For use with 742 or 489 housing or Mopar aluminum housing
(P4876445). Kit includes U-bolts and pinion nut.
P4510638 Axle Yoke — 10 Spline, 1.078" Bearing Cap,

Aluminum Billet (8-3/4" Axles)
Aluminum Billet (8-3/4" Axles)
4130 Chrome Moly Billet (8-3/4" Axles)
4130 Chrome Moly Billet (8-3/4" Axles) A. B.
B. Slip Yoke Kits

For use with driveshaft kits or general service.
P5007409 Slip Yoke Kit — Type 7260 U-Joint,

26 Spline, 6.80" Long (A-904)
26 Spline, 7.30" Long (A-904)
29 Spline, 8.00" Long (A-727)
C. Universal Joint Packages

U-joint for driveshaft use.
P3690773 Universal U-Bolt Assembly Package —

1330 Series
C. D.
P5007418 Universal Joint Package — Adapts
7260 Driveshaft to 7290 Axle Yoke
D. Axle Yoke Kits

Complete driveshaft pinion yoke kits include yoke, U-joint
retaining straps, strap hold-down bolts, yoke retaining
washer and nut, and instructions.
P4529483AB Axle Yoke Kit — 29 Spline, 7290 Joint

(8-3/4" Axles)
P4876804 Axle Yoke Kit — 10 Spline, 7290 Joint
(Dana 60 Axles)
E. U-Bolt Yoke Conversion Kit — 29 Spline

This kit converts standard strap type assembly to stronger
U-bolt assembly on Dana 60 axles with type 7290 U-joints.
Allows use of stock prop shaft. E.
P5007417AC U-Bolt Yoke Conversion Kit — Adapts 7290
Yoke to 7260 Driveshaft, 8-3/4" Carrier
F. U-Joint and Prop Shaft Assembly Kit

For custom fabrication of prop shafts. Kit includes the
following: front (7290) yoke; 3-1/4" 16 gauge tube assembly
(58.20" in length); two U-Joints and balance weights (two of
each: 0.26 oz., 0.36 oz., 0.50 oz., 0.75 oz., and 1.00 oz.).
P4876886 U-Joint and Prop Shaft Assembly Kit —

7290 Joint (1971–2000 8-1/4", 1962–74
8-3/4" and 1962–74 9-1/4" Axles)
Note: Does not include slip yoke.
F.
102
DRIVETRAIN
A. U-Joint U-Bolt Service Package
Services U-Bolt Conversion Kit. Two required.
P3690774 U-Joint U-Bolt Service Package

(Dana 60 Axles)
B. U-Joint Strap and Bolt Packages

This inexpensive package will help you avoid potential
driveshaft failure and give you peace of mind. Use with Dana
60 Axle Yoke Kit P4876804.
P4120468 7260 U-Joint Strap and Bolt Package

(8-1/4" and 8-3/4" Axles)
A. B. P4120469 7290 U-Joint Strap and Bolt Package
(8-3/4" and Dana 60 Axles)
REAR AXLE COMPONENTS

C. Aluminum Carrier Housing
Designed to reduce weight and hold up under high torque.
Uses 1-3/4" large stem pinion and standard components.
The 8-3/4" aluminum axle housing uses “742” style large
stem ring and pinions, and it fits 8-3/4" banjo housings (up to
1974). It features a weight reduction of 44% (approximately
11 lbs. to 14 lbs.), compared to production cast iron housing,
and includes 6061 billet aluminum caps. It is stiffer than cast
iron and decreases pinion deflection 10%. It uses “742” style
bearings and shims, service parts and sure-grips.
Note: Clearance required on 3.23:1 or higher ratios. Adjuster lock
bolts may need to be replaced with socket head bolts.
C.
P4876445 Aluminum Carrier Housing (8-3/4" Axles)
P5007239 Housing Gasket (8-3/4" Axles)
D. Ring and Pinion

This high-performance rear end Ring and Pinion is manufactured
with a special heat treat process. It is made with the special
needs of drag race and off-road competition in mind.
*P4529272AB Ring and Pinion — 3.90:1 Ratio, 12-Bolt

Cover (9-1/4" Axles)
E. Axle Brace
Keeps axle tubes from twisting under extreme loads and
provides strength and rigidness to the Chrysler 8-3/4" axles.
Welding required.
D. P4510642 Axle Brace (8-3/4" Axles)
F. Differential Clutch Kits

Kits include O.E. clutch discs and plates to rebuild a limited
slip differential.
P4529484 Differential Clutch Kit (8-3/4" Axles)

P4529485 Differential Clutch Kit (9-3/4" Axles)
E. F.
DRIVETRAIN
DRIVETRAIN AND REAR AXLE
COMPONENTS
A. Rear Axle Bearing Set
This Rear Axle Bearing Set was specifically designed by
Mopar to eliminate the production bearing retainers and axle
end play adjuster. Set contains two axle shaft bearings, two
bearing retainer sleeves, two axle shaft seals and two axle
flange gaskets.
P5249444 Rear Axle Bearing Set (1965 and Newer

8-3/4" and 9-3/4" Axles)
A. B.
B. Crush Sleeves
Original equipment crush sleeves for setting up rear axle.
Includes pinion nut washer and pinion flange nut.
P4529700 Crush Sleeve (8-1/4" Axles)

P4529702 Crush Sleeve (9-1/4" Axles)
C. Ring Gear Retaining Bolt Packages

Complete set of 12 Ring Gear Retaining Bolts with instructions.
P4529486 Ring Gear Bolt Package — Right-Hand

Thread (1971 and Newer 7-1/4" and 8-3/4"
Axles, 1972 and Newer 8-1/4" Axles)
P5249163 Ring Gear Bolt Package — Left-Hand
Thread (Up to 1970 7-1/4" and 8-3/4" Axles,
Up to 1971 8-1/4" Axles)
C. D.
D. Synthetic Gear Lube
Mobil 1 Synthetic Gear Lube improves wear protection.
Engineered to protect your axle in severe duty applications.
P5007326 Mobile 1 Synthetic Gear Lube —

75W-140 MS8985
DIFFERENTIAL COMPONENTS
E. Sure-Grip Differential Assemblies
Mopar supplies production replacement Sure-Grip
Differential Assemblies for rear axles. These assemblies are
complete for high-performance applications. Designed for
gear ratios of 2.76:1 and higher.
P4529273 Sure-Grip Differential Assembly

(Up to 1995 8-1/4" Axles) E.
P4876118 Sure-Grip Differential Assembly
(8-3/4" Axles)
F. RWD Chrome Differential Covers

Impress those behind you with one of these Chrome
Differential Covers. Attaching bolts not included.
P3690753 RWD Chrome Differential Cover (8-1/4" Axles)

P3690754 RWD Chrome Differential Cover
(1973 and Newer 9-1/4" Axles)
P3690755 RWD Chrome Differential Cover
(9-3/4" Dana 60 Axles)
G. Rear Axle Cover Chrome Attaching Bolt Sets

Complete set of Chrome Attaching Bolts for chrome rear axle
covers.
F. G.
P4452787 Chrome Attaching Bolts — Set of 12
(7-1/4", 8-1/4", 9-1/4" Axles)
P5249719 Chrome Attaching Bolts — Set of 9
(9-3/4" Dana Axles)
104
STEERING
SUSPENSION
BRAKES
105
106
If you love to drive your classic Mopar, don’t forget to
HOLD ON!
and dependability as those originally installed at the factory.
upgrade and replace your steering, suspension and brake So do the right thing for your vehicle and yourself—
components. Parts by Mopar provide the same high quality then hold on for the ride of your life!
107
STEERING/SUSPENSION/
BRAKES
LEAF SPRINGS
A. XHD Leaf Springs — Original Equipment
These extra heavy-duty, original equipment leaf springs are
just like the bias design production springs that were stock
items on 1968–72 A-Body vehicles with 340 high-performance
engines, 1967–71 B-Body vehicles with 440 or 426 manual and
automatic transmissions, and 1970–74 E-Body vehicles with
440 or 426 manual or automatic transmissions. Springs will fit
any A-Body (1968–72), B-Body (1966–72) or E-Body (1970–74),
regardless of engine size, and come with front bushing
installed in assembly. B-Body: front 22", rear 36".
Note: Lighter cars may sit higher than stock. A.
P4510268 XHD Leaf Spring — Right (1964–75 A-Body)

P4510269 XHD Leaf Spring — Left (1964–75 A-Body)
P4452982 XHD Leaf Spring — Right (1966–72 B-Body)
P4452983 XHD Leaf Spring — Left (1966–72 B-Body)
P4452984 XHD Leaf Spring — Right (1970–74 E-Body)
P4452985 XHD Leaf Spring — Left (1970–74 E-Body)
LEAF SPRING ATTACHMENT

HARDWARE
B. Solid Leaf Spring Front Eye Bushings
Improves spring reaction by cutting down on rubber
deflection. Steel sleeve allows free movement of aluminum
bushing. Designed for use with competition leaf springs
(Super Stock). Contains two.
B. C.
P4510644 Solid Leaf Spring Front Eye Bushing —
1-1/2" Dia., 2.00" Length (A-, B- and
E-Bodies)
C. Rear Spring Shackle Bushings

Intended for A-, B- or E-Body vehicles, these bushings are
available as either high-performance polyurethane for
improved vehicle handling, or as original equipment,
heavy-duty rubber for restoration projects. Sold in sets
of eight bushings.
P4510643 Polyurethane Rear Spring Shackle

Bushings (A-Body)
P4452986 O.E. Rubber Rear Spring Shackle
Bushings — 7/8" (A-Body)
P4452987 O.E. Rubber Rear Spring Shackle
D.
Bushings — 1" (B-Body, E-Body,
Super Stock Springs)
D. Rear Spring Mounting Seats

Use for leaf spring suspension installation. Seats work
with all leaf springs and all 3" diameter tube rear axles
(8-1/4", 8-3/4", 9-1/4", 9-3/4"). Sold individually.
P4120074 Rear Spring Mounting Seats

P5007857 Rear Spring Mounting Seats —
for Super Stock Springs
E. Rear Spring Shock Mounting Plates

These Rear Spring Shock Mounting Plates are designed for
A-, B- and E-Body cars. They provide lower shock pivot and
support for the U-bolts that hold the rear spring to the axle.
Sold individually. E.
P4876518 Rear Spring Shock Mounting Plates —
Right (A-, B- and E-Bodies)
P4876519 Rear Spring Shock Mounting Plates —
Left (A-, B- and E-Bodies)
108
BRAKES
A. Spring U-Bolt and Nut Packages

U-bolt replacement for car springs. Package includes four
spring/axle U-bolts and eight nuts.
P5249709 Spring U-Bolt and Nut Package — 7"

(8-3/4" and Dana 60 Axles)
B. Straight Rear Shackle Packages

Packages include bushings, side plates and nuts. Can be
used for general service and special applications.
A. B.
P5249716 Straight Rear Shackle Bushing —
One Shackle Only (B-Body)
P5249715 Straight Rear Shackle Bushing —
One Shackle Only (A-Body)
TORSION BARS AND HARDWARE

C. Torsion Bar Sets
Mopar offers torsion bars in a variety of diameters for
restoration, performance and racing, for A-, B- and E-Body
cars to improve the suspension performance and cornering
ability or weight transfer. The A-Body bars are 35.70" long;
the B- and E-Body bars are 41" long. These sets bolt right
into stock locations without modifications (sold as sets of 2).
P5249148 Torsion Bar Set — 0.810" Diameter

C.
(A-Body)
(A-Body)
(A-Body)
(A-Body)
(B- and E-Bodies)
(B- and E-Bodies)
(B- and E-Bodies)
D. Torsion Bar Lock and Seal
P5249609 Torsion Bar Lock and Seal

D.
(A-, B- and E-Bodies)
P4876097 Torsion Bar Lock Clip
TORSION BAR SETS

Part Number Diameter Body Application
P5249148 0.810" Diameter A-body Drag Racing
Restoration for 340 Cars, Improved Slant 6, 273 and
P5249149 0.870" Diameter A-body
318 Handling
Restoration for 383 Cars, Improved Small Block
P5249150 0.890" Diameter A-body
Handling
P5249151 0.920" Diameter A-body Performance Handling, Solo Racing
Restoration for 440 and Hemi® Cars, Improved Small
P5249157 0.920" Diameter B- and E-body
Block Handling
P5249158 0.960" Diameter B- and E-body Improved Big Block and Hemi Handling
P5249162 1.220" Diameter B- and E-body 1/4 Or 1/2 Mile Banked Circle Track Racing
109
BRAKES
FRONT SUSPENSION BALL JOINT
AND HARDWARE
A. Front End Seal Packages
Contains seals for tie rod ends, pitman arm, upper and
lower ball joints, and idler arm.
P5249226 Front End Seal Package

(1968–76 A- and E-Bodies)
P5249229 Front End Seal Package (1968–72 B-Body)
B. RWD Front Strut Bushing Packages

Minimize fore and aft movement during braking and
hard acceleration with these bushings made of special A. B.
high-durometer material.
P4529183 RWD Front Strut Bushing Package

(1967–76 A-Body)
P4529184 RWD Front Strut Bushing Package
(B- and E-Bodies)
MANUAL STEERING HARDWARE

C. Power-to-Manual Steering Adapter
This adapter allows you to convert vehicles equipped with
power steering to a manual steering box.
P4510637 Power-to-Manual Steering Adapter

C. D.
D. Manual Steering Gear Worm and
Ball Nut Package
Replace your 26:1 manual steering production gear ratio
set with this improved 20:1 ratio package.
P4007612 Manual Steering Gear Worm and Ball

Nut Package (1963–85 Passenger Cars)
SHOCKS AND STRUTS

E. Urethane Suspension Bushings
Tough, durable polyurethane gives these bushings higher
durometers than production rubber units. Recommended
for circle track, solo and road racing applications. They can
also be used in drag racing where they apply.
P4876196 Control Arm Bushing Kit — Front E. F.

(1962–76 A-Body)
P4876197 Front Eye Leaf Spring Bushing Kit —
Standard, Rear (A-, B- and E-Bodies) LEAF SPRING BUSHING KITS
P5007088 Leaf Spring Bushing Kit — Rear
(1965–72 426/440 B-Body) Main Eye/ Frame
Part Number Spring ID Bolt/Sleeve OD Spring Width
Shackle End Bracket Width
P5007087 Leaf Spring Bushing Kit — Rear
(1965–72 B-Body except 426/440) Main Eye 1.50" 1/2" Bolt 2.50" 3.00"
P4876206 Transmission Mounts (1967–83 P4876197
Shackle End 7/8" 1/2" Bolt 2.50" 3.00"
A-, B-, C-, E-, F- and M-Bodies)
Main Eye 1.96" 5/8" Bolt 2.50" 3.125"
P5007087
F. Replacement End-Link Bushings Shackle End 1.00" 9/16" Bolt 2.50" 3.00"
These hard urethane bushings can be used to replace stock
Main Eye 1.50" 5/8" Bolt 2.50" 3.125"
bushings, or use with Mopar performance sway bars. Extra P5007088
hard for positive stiffness and longer wearability. Sold in Shackle End 1.00" 9/16" Bolt 2.50" 3.00"
sets of eight.
P4349116 Replacement End-Link Bushings
110
BRAKES
MASTER CYLINDER COMPONENTS
A. Master Cylinder Heat Shield
This stainless steel Master Cylinder Heat Shield prevents
heat from the exhaust header or exhaust manifolds from
boiling and degrading the brake fluid. Perfect for Big Block
A-Body conversions.
P4510634 Master Cylinder Heat Shield

(Big Block A-Body)
B. Master Cylinder Adapter

Converts the four-hole mount in your firewall to a two-hole
A. mount. For use with Mopar Master Cylinder Assemblies
P5249270 and P5249271, and Brake Cylinder Pushrod
Package P5249316AB.
P5249315 Master Cylinder Adapter
C. Offset Master Cylinder Adapter

This Offset Master Cylinder Adapter moves the master
cylinder away from engine, for added clearance with Hemi
or 440 engine valve covers. Designed specifically for 1968
Hemi A-Body cars.
P5249717 Offset Master Cylinder Adapter

(1969 Hemi A-Body)
B.
C.
111
BRAKES
BRAKE PUSHRODS
A. Adjustable Brake Pushrod
For use with lightweight Master Cylinders P5249270
and P5249271.
P4510640 Adjustable Brake Pushrod
B. Brake Cylinder Pushrod Package

Package contains pushrod assembly, bolt, nut, washer,
adhesive, roll pin, and instruction sheet. For use with Mopar
Master Cylinder Assemblies P5249270 and P5249271, and
Master Cylinder Adapter P5249315.
A.
P5249316AB Brake Cylinder Pushrod Package
BRAKE PROPORTIONING VALVE

C. Lightweight Brake Proportioning Valve
Made from lightweight billet aluminum, this valve is
compact for all applications. Perfect for all hydraulic brake
applications and easy to adjust with the turn of a knob. For
diagonally split brakes, install one valve in each rear brake
line (do not change brake system to front-to-rear split).
P5249088 Lightweight Brake Proportioning Valve
B.
C.
112
BODY AND WHEELS
113
BODY & WHEELS
From minor detailing to full blown And when it comes to smaller—but original tooling. These add the perfect
restorations, make Mopar your first just as critical—items, Mopar’s new final touch to any muscle car.
stop when choosing the right parts for 15" X 7" trim rings will add the right
your project. touch to your 15" Rallye Wheels. Now So go ahead, indulge yourself and your
you can say so long to the “car show classic muscle car with original Mopar
New this year is a complete line of know-it-alls” who complain about the parts. We won’t even tell your wife!
1970–74 Dodge Challenger sheet metal wrong valve stem cap or license plate
made to original blueprint specs. This bolts. Here’s why: Mopar’s new 15" X 7"
includes front fenders and full rear trim rings are made from original tooling
quarters. Now there’s no need to call and have the proper fit and finish.
Bubba in the Happy Valley Acres Junk
Yard looking for Challenger sheet metal Mopar also carries a full line of vintage
and paying through the nose. muscle car nameplates made from the
114
115
BODY & WHEELS
BODY AND WHEELS — EXTERIOR
BODY COMPONENTS
A. NEW! Hood
This high-quality steel hood is an exact reproduction that will
make your Challenger look like it just came from the factory.
Forget welding, grinding, filling, sanding—who needs it? But
if you want to brag about the long hours you spent to make it
look perfect, go right ahead—we won’t tell!
P5153393 Rallye Hood — Dual Scoop Type

(1970–74 Challenger R/T and Rallye)
B. NEW! “Challenger R/T” Hood Scoop A.

Insert Set — Left/Right-Hand
Don’t install faded, cracked or damaged inserts on your
brand-new Rallye-style hood. These exact replicas are the
perfect complement to your muscle car. Sold in sets
(one left-hand and one right-hand).
P5153394 “Challenger R/T” Hood Scoop

Ornament Set — Left/Right-Hand
(1970–74 Challenger R/T and Rallye)
C. NEW! Quarter Panel

Get it right the first time. Mopar’s new steel replacement
quarter panels are manufactured to O.E. specs, and are
exact reproductions. Installation requires welding.
P5153395 Quarter Panel — Left-Hand B.

(1970–71 Challenger)
P5153396 Quarter Panel — Right-Hand
P5153397 Quarter Panel — Left-Hand
P5153398 Quarter Panel — Right-Hand
D. NEW! Outer Wheelhouse

If a quarter panel needs replacement, it’s a good bet the
outer wheelhouse does too. These steel reproduction
units install easily requiring only minor welding, and add
a finishing touch to any restoration. Sold individually.
P5153423 Outer Wheelhouse — Left-Hand

(1970–74 Barracuda)
P5153424 Outer Wheelhouse — Right-Hand C.
(1968–70 B-Body Models —
Road Runner/GTX)
P5153434 Outer Wheelhouse — Right-Hand
(1968–70 B-Body Models —
Road Runner/GTX)
(1968–70 Coronet and Charger)
(1968–70 Coronet and Charger)
D.
116
BODY & WHEELS
A. NEW! Rocker Sill Plate
Unless your classic has been hermetically sealed since
it was new, your rocker sill plates are probably heavily
scratched and/or damaged. These quality pieces are precise
reproductions that will help make your ride look factory fresh.
P2879600 Rocker Sill Plate (1970–74 Challenger and

Barracuda)
P3416002 Rocker Sill Plate (1971–74 B-Body 2-Door)
B. NEW! Front Valence

Don’t let a badly dented or damaged front valance
panel ruin the look of your classic. Replace it with this
A. high-quality steel reproduction unit. Fits perfectly, with
no modifications necessary.
P5153388 Front Valence (1970–71 Challenger)

P5153407 Front Valance (1968–69 Charger)
P5153415 Front Valance (1970 and 1972–74
Barracuda)
C. NEW! Front Fender

Why spend a lot of time and money bringing old fenders
back to life when you can purchase these competitively
priced brand-new parts? These all-steel fenders are
manufactured to original equipment specifications and fit
perfectly with no drilling or modifications required. Includes
all factory bracing and headlight buckets.
P5153389 Left Front Fender (1970–71 Challenger)

B. P5153390 Right Front Fender (1970–71 Challenger)
P5153391 Left Front Fender (1972–74 Challenger)
P5153392 Right Front Fender (1972–74 Challenger)
D. NEW! Front Bumper

There is no way you can fully restore a front bumper for less
than the cost of this brand-new unit. This brilliant chrome
bumper bolts right on, and even includes new chrome
bumperettes. Your Charger never had it so good.
P5153405 Front Bumper — Chrome with

Bumperettes (1968–69 Charger)
E. NEW! Front Bumperettes

Your bumperettes have done their job—they’ve protected
your Charger’s bumper from life’s little dings and scratches.
But now they don’t look so good. No problem! These
C. brand-new chrome replacement units will make your
bumper look like new again. Sold in pairs.
P5153406 Front Bumperettes —

Chrome (1968–69 Charger)
D. E.
117
BODY & WHEELS
A. Hood Pin and Cable Kit
Kit includes a pair of hood pins and complete attachment
hardware. Exposed hardware is chrome-plated.
P4529405 Hood Pin and Cable Kit
B. NEW! Lower Front Grille

If the lower front grille on your muscle car is badly scratched,
distorted or cracked, replace it with this brand-new piece
from Mopar. This high-quality reproduction fits perfectly and
includes the turn signal light casings. It is durable, paintable,
and sells for a price that can’t be beat.
03672933 Lower Front Grille A. B.

(1972–74 ’Cuda)
C. NEW! Rear Valance

Over time, the rear valance panel is exposed to a lot of abuse.
Mud, rocks, parking curbs—you name it. If yours is less than
perfect, replace it with this high-quality steel reproduction.
Installs with minimal modifications and will look great for
years to come.
P5153401 Rear Valance without Dual Exhaust Cutouts

P5153402 Rear Valance with Dual Exhaust Cutouts
P5153412 Rear Valance (1968 Charger)
P5153413 Rear Valance (1969–70 Charger)
P5153425 Rear Valance without Exhaust Cutouts
(1970–74 Barracuda) C.
P5153426 Rear Valance with Exhaust Cutouts
D. NEW! Rear Bumper

Restoring bumpers is expensive, and trying to find one in
mint condition is almost impossible. Mopar now offers
these premium chrome bumpers at a cost that just can’t be
beat. No modifications necessary. They bolt right up using
production brackets and mounting points.
P5153411 Rear Bumper — Chrome with Guards

(1968–70 Charger)
P5153435 Chrome Rear Bumper (1968 B-Body —
Road Runner and GTX)
P5153436 Chrome Rear Bumper (1969 B-Body —
Road Runner and GTX)
D.
E. NEW! Rear Bumperettes
Your rear bumper is in good shape, but the bumperettes
aren’t looking so good. Not to worry! Mopar now sells these
high-quality chrome replacement pieces so your bumper
looks like new again. Sold in pairs.
P5153414 Rear Bumperettes —

Chrome (1968–70 Charger)
F. NEW! Chrome Remote Mirror with

Hardware — Left-Hand
Forget about paying an inflated price at a swap meet for
a chrome mirror that’s scratched or pitted. This brand-new
reproduction not only looks great and fits perfectly, but
it also includes new hardware.
03695508 Chrome Remote Mirror with Hardware — E. F.

Left-Hand (1966–70 B-Body and 1968–76
A-Body)
118
BODY & WHEELS
A. Challenger/’Cuda Door Handles
P3760214 Door Handle — Right (Challenger and `Cuda)

P3760215 Door Handle — Left (Challenger and `Cuda)
B. “A/B” Body Door Handles
03454390 Door Handle, 1968–70 B-Body,

1968–75 A-Body, Right Side
03454391 Door Handle, 1968–70 B-Body,
1968–75 A-Body, Left Side
C. NEW! Park Lamp/Marker Lenses

A. B. Why spend hours scouring swap meets hoping to find
a decent parking or marker lens, when you can buy a
brand-new piece for less? These lenses offer a perfect fit
and add sparkle to your classic. Right and left sides are
interchangeable. Sold individually.
P5153408 Park Lamp Lens — Left-Hand

(1968–69 Charger)
P5153410 Park Lamp Lens — Right-Hand
(1968–69 Charger)
P5153575 Park Lamp Lens — Right-Hand
(1968–69 Plymouth B-Body)
03587436 Marker Lens — Front Side Amber
(1972–75 B-Body, 1972–74 E-Body,
1972–76 A-Body, 1976–80 F-Body)
03587440 Marker Lens — Rear Side Red
(1972–75 B-Body, 1972–74 E-Body,
C. 1972–76 A-Body, 1976–80 F-Body)
P5153386 Marker Lens — Rear Side, Red
(1969 Super Bee, Coronet R/T,
Charger R/T, Road Runner and GTX)
P5153409 Park Lamp Lens — Left/Right Hand
with Gaskets (1968–69 Charger)
P5153428 Park Lamp Lens — Left/Right Hand with
Gaskets (1968–69 Road Runner and GTX)
P5153384 Marker Lens — Front Side, Amber
(1969 Super Bee, Coronet R/T,
P5153387 Front and Rear Kit — Reflector/Side
Marker (1969 Super Bee, Coronet R/T,
D. NEW! Grille and Headlamp Bezel Package

Now you can replace the grille and headlight bezels for your
D. classic ‘69 Road Runner without having to break the bank.
This complete package will make your ride stand apart from
the crowd. High-quality reproduction pieces are made to
original equipment specifications.
P5153416 Grille and Headlamp Bezel Package

(1969 Road Runner)
E. NEW! Headlamp Bezel Set

Headlight bezels need replacing but you don’t have time to search
for individual matching pieces? No problem! Mopar offers this
high-quality reproduction set for all you ‘69 Road Runner owners
who demand the very best. No modifications necessary.
P5153417 Headlamp Bezel Set (1969 Road Runner)
F. NEW! Grille
E. F. Who offers brand-new grilles manufactured to original
equipment specifications? Mopar, of course! Add this
beautiful reproduction to your ride and be the envy of all.
No modifications necessary.
P5153427 Grille (1969 Road Runner)

119
BODY & WHEELS
WHEEL COMPONENTS
A. NEW! Chrome Lug Nut

These O.E. high-quality chrome lug nuts are designed for
use with all Road and Rallye wheel applications, along with
the 1969-1/2 6BBL Road Runner and Six Pack Super Bee
vehicles. Left and right hand thread. Sold individually.
02823848 Chrome Lug Nut (Right-Hand Thread)

02823849 Chrome Lug Nut (Left-Hand Thread)
B. Trim Rings
A.
These 14" and 15" Trim Rings for Rallye, Road and Steel
wheels are available in either a chrome or brushed finish.
They are made from the original tooling and have the correct
retaining ring for a proper fit.
P2944424 14" Rallye/Road Wheel Trim Ring —

Brushed Finish
P3461043 Chrome Trim Ring — 15" (15" x 7" Rims)
P3461222 Brushed Trim Ring — 15" (15" x 7" Rims)
C. Rallye and Road Wheel Center Caps

Rallye and Road Wheel Center Caps are made from original
tooling with correct astrotone finish.
P4510579 Rallye Wheel Center Cap —

4.500" Bolt Circle, Light Argent Finish
(All 1970 Applications)
B.
P3461066 Rallye Wheel Center Cap —
4.500" Bolt Circle, Dark Argent Finish
(All 1971 Applications)
P3461458 Rallye Wheel Center Cap — 4.500"
Bolt Circle (All 1972–75 Applications)
P3580466 Road Wheel Center Dome
(All 1966–78 Applications)
Wheel Paint (Not Shown)

Polyurethane formulated Argent Silver paint gives that
factory look to wheels, grilles and light bezels, or anywhere
Argent paint was used.
P4529876 Argent Wheel Paint
D. RWD Wheel Stud Sets

Studs for RWD cars are heavy-duty and extra long to allow C.
use of wheel spacers. Set contains 10 studs.
P4120610 RWD Wheel Stud Set — 1/2" Diameter,

Disc Brakes (A-, B- and E-Body)
P4120625 RWD Wheel Stud Set — 1/2" Diameter,
Drum Brakes (A-, B- and E-Body)
D.
120
BODY & WHEELS
NAMEPLATES AND EMBLEMS
Mopar nameplates are exact, high-quality reproductions. They
are manufactured using the same materials and attention to
detail as the originals. Don’t put up with damaged, pitted or
scratched nameplates anymore — replace them with these
eye-catching works of art.
A.
A. NEW! “340” Nameplate
Complete your classic small block-powered restoration
with this faithfully reproduced nameplate. Adds the perfect
finishing touch.
P3612874 “340” Nameplate (1970 Swinger,

B. 1972 Demon, 1973 Dart Sport)
B. “340 Four-Barrel” Nameplate Emblem
P3443247 “340 Four-Barrel” Nameplate Emblem —

Hood (1970–73 Challenger with Rallye Hood)
C. “340 Magnum” Nameplate Emblem
C. P3573632 “340 Magnum” Nameplate Emblem —

Hood (1971 Charger Super Bee, 1972–73
Charger Rallye with Power Bulge Hood)
D. “360 Four-Barrel” Nameplate Emblem
P3691468 “360 Four-Barrel” Nameplate Emblem —

Hood (1971 Charger Super Bee,
D. 1974 Challenger with Rallye Hood)
E. “383 Magnum” Nameplate Emblems
P2998801 “383 Magnum” Nameplate Emblem —

Hood (1970–71 Challenger with Rallye Hood)
Hood (1971 Charger Super Bee with Power
Bulge Hood)
E.
F. “400 Magnum” Nameplate Emblem

Hood (1972–74 Charger Rallye with
Power Bulge Hood)
F. G. “426 Hemi” Nameplate Emblem
P2998800 “426 Hemi” Nameplate Emblem —

Hood (1970–71 Challenger with
Rallye Hood, 1971 Charger with
Power Bulge Hood)
H. “440” Nameplate Emblem
P3613278 “440” Nameplate Emblem —

G.
Hood (1969 GTX, 1969–70 Coronet R/T,
Super Bee with Ramcharger Hood,
1970 Sport Fury)
H.
121
BODY & WHEELS
A. “440 Magnum” Nameplate Emblems

Hood (1970 Challenger with Rallye Hood)
Fender (1972 Charger, Charger SE)
Hood (1971–74 Charger with Power A.
Bulge Hood)
H. NEW! “440+6” Hood Decal

Replace damaged or badly faded hood scoop decals for
your favorite Big Block with these exact reproductions.
Sold as a pair.
B.
P2998896 “440+6” Hood Decal (1970 Road Runner
and GTX 440 Six Barrel; Sold as a pair)
C. NEW! “440 6BBL” Hood Decal

You’ve sweated over every detail. Now it’s time to finish off
your restoration with these exact reproduction hood decals.
Sold as a pair.
P3412427 “440 6BBL” Hood Decal (1969-1/2 Road

Runner 440 Six Barrel “Lift-Off Hood”
Applications)
D. NEW! “SIX PACK” Hood Decal

Proudly proclaim to the world what you’ve got under the
hood. Exact reproduction of original. Sold as a pair.
P3412423 “SIX PACK” Hood Decal (1969-1/2 C.

Super Bee 440 Six Pack “Lift-off Hood”)
E. “440 Six Pack” Nameplate Emblems
P2998804 “440 Six Pack” Nameplate Emblem

(1970–71 Challenger Rallye, 1971 Charger
Power Bulge)
P3462491 “440 Six Pack” Nameplate Emblem — Right
(1970–71 Challenger with Shaker Hood) D.
P3462492 “440 Six Pack” Nameplate Emblem — Left
(1970–71 Challenger with Shaker Hood)
F. “Challenger” Nameplate Emblem
P3444938 “Challenger” Nameplate Emblem

E.
G. “Charger” Nameplate Emblems
P3504807 “Charger” Nameplate Emblem —

Fender (1971–74 Charger)
P2841886 “Charger” Nameplate Emblem
(1966–74 Charger)
F.
G.
BODY & WHEELS
A. “’Cuda 340” Nameplate Emblem
P3443159 “’Cuda 340” Nameplate Emblem — Hood

(1970–73 ’Cuda with Shaker or Sport Hood)
B. “’Cuda 383” Nameplate Emblem

A.
P2998796 “‘Cuda 383” Nameplate Emblem — Hood
(1970–71 ‘Cuda with Shaker or Sport Hood)
C. “’Cuda 440-6” Nameplate Emblem
P2998798 “‘Cuda 440-6” Nameplate Emblem — Hood

B. (1970–71 ‘Cuda with Shaker or Sport Hood)
D. “Dart” Nameplate Emblem
P3505419 “Dart” Nameplate Emblem (1970–75 Dart)
E. “D” “O” “G” “E” Emblems
P2579655 “D” Emblem (1966–74 Dodge Vehicles)

C. P2579656 “O” Emblem (1966–74 Dodge Vehicles)
P2579657 “G” Emblem (1966–74 Dodge Vehicles)
P2579658 “E” Emblem (1966–74 Dodge Vehicles)
F. “Duster” Nameplate Emblem”
P3680304 “Duster” Nameplate Emblem

(1972–75 Duster)
D.
G. NEW! “GTX” Nameplate
P3680160 “GTX” Nameplate

P3504289 “GTX” Nameplate Emblem —
Quarter Panel (1969–71 GTX)
P2785518 “GTX” Nameplate Emblem —
Front Fender (1967 GTX) and Deck Lid
(1972–74 440 GTX Road Runner)
E.
F.
G.
BODY & WHEELS
A. “Magnum” Nameplate Emblem
P3691667 “Magnum” Nameplate Emblem —

Hood (1972–74 Charger Rallye with
Power Bulge Hood)
B. “Plymouth” Nameplate Emblems A.
P2785791 “Plymouth” Nameplate Emblem

(1970–72 Duster Hood, 1968–69 Road
Runner and GTX Hood)
P2998042 “Plymouth” Nameplate Emblem
(1970 Road Runner, GTX Hood and
1971 Barracuda Hood) B.
P3444927 “Plymouth” Deck Lid and Hood
Nameplate — 1970–72 Road Runner,
GTX, Barracuda and Duster
C. NEW! Road Runner Decals

Mopar offers several Road Runner decals for doors and
decklids, to perfectly match the style you need. If your
decals are damaged or badly faded, replace them with
these brand-new pieces. Beep-Beep!
03672656 Road Runner Decal — Round Style,

Standing in Circle (1971–74 Road Runner)
P2842756 Road Runner Decal (1968 Road Runner;
Deck Lid)
Left Door)
P2842758 Road Runner Decal (1968 Road Runner; C.
Right Door)
Deck Lid with Finish Panel)
P2964116 Road Runner Decal — Standing Style
Road Runner with Helmet (1969–70
Road Runner; Rear Deck Lid)
P3672656 Road Runner Decal — Standing Style
Road Runner with Helmet Inside Circle
(1971–75 Rear Deck Lid)
P4022410 Road Runner Decal — Left
P4022411 Road Runner Decal — Right
D. “Road Runner” Nameplate Emblems
P3505490 “Road” Nameplate Emblem

(1969–75 Road Runner)
P3505491 “Runner” Nameplate Emblem D. E.
(1969–75 Road Runner)
E. “R/T” Nameplate Emblems
P3445223 “R/T” Nameplate Emblem — Decklid and

Front Fender (1970 Challenger R/T)
P2901812 “R/T” Nameplate Emblem — Quarter
Panel (1969 Charger R/T and Coronet R/T)
P2786711 “R/T” Nameplate Emblem — Grille
(1968 Coronet R/T)
P2785579 “R/T” Nameplate Emblem — Front Fender
(1968 Coronet R/T)
(1970–71 E-Body)
(1969 Coronet R/T)
F.
F. “Special Edition” Nameplate Emblem
P2782966 “Special Edition” Nameplate Emblem

(1966–70 Charger and Coronet)
124
BODY & WHEELS
A. Super Bee Emblems
P2998065 Super Bee Emblem — Hood (1970 Super Bee)

P2949303 Super Bee Emblem — Grille (1969 Super Bee)
P2964635 Super Bee Emblem — Deck Lid (1969 Super Bee)
B. “Super Bee” Nameplate Emblem
P2998749 “Super Bee” Nameplate Emblem — Hood

(1970 Super Bee with Power Bulge Hood)
C. “Swinger” Nameplate Emblem
A. P3446861 “Swinger” Nameplate Emblem — Quarter

Panel and Decklid (1970–75 Swinger)
UNDERHOOD
D. NEW! Windshield Washer Reservoir
When judges look under the hood, a sparkling clean
windshield washer reservoir really stands out. If yours
B. is yellow, cracked, or just plain looks bad, don’t clean it.
Instead, replace it with a brand-new one from Mopar.
Exact reproduction; uses production hardware.
02889803 Windshield Washer Reservoir

(1967–70 B-Body)
(1970–75 A-Body, Duster, Dart,
C.
Demon, Swinger, Valiant)
(1970–71 E-Body, 1971 B-Body)
(1970–73 C-Body)
(1972–74 B- and E-Body)
E. NEW! Shaker Hood Seal

A whole lotta shakin’ means a lot of wear and tear to your
hood seal. If your Shaker hood seal hasn’t been replaced
within the last ten years, odds are you’re overdue. This
reproduction offers a perfect fit and the same high-quality
as original.
03418658 Shaker Hood Seal (1970–71 ‘Cuda

and Challenger Shaker Hood)
D.
F. NEW! Universal Underhood Pad
This cut-to-fit universal pad helps to dress up your
underhood appearance and protect the paint on
your hood from engine heat damage. For all body styles.
04049601 Universal Underhood Pad (Cut-to-Fit)
E. F.
125
BODY & WHEELS
BODY AND WHEELS — INTERIOR
A. NEW! Steering Wheel
If your steering wheel is cracked, faded or badly damaged,
replace it with this high-quality reproduction. Helps your
interior look like new.
P5153385 Steering Wheel — Black

(1968–69 Barracuda, Charger, Coronet,
Dart, Road Runner and GTX)
B. NEW! Rubber Floor Mats

These high-quality rubber floor mats are an exact
reproduction of the factory units. Manufactured with the
vintage Mopar logo, they add an authentic look to any
classic Mopar.
P5153381 Rubber Floor Mats —

Black with Mopar Logo A.
Medium Blue with Mopar Logo
Green with Mopar Logo
B.
126
BOOKS
127
BOOKS
A. Mopar Crate Motor Installation Manual
This book is for anyone wanting to install a Mopar crate
engine or short block assembly into their street rod/street
machine, muscle car, race car, truck, etc. Information includes
custom installation and setup information for Magnum,
Big Block Wedge, and Hemi crate engines, as well as our
Pre-Magnum and Magnum Short Block engine assemblies.
Additional information on safety modifications and crate
engine functionality is also included, along with a detailed
426 Hemi crate engine Dakota case study. Hundreds of
photos and illustrations. All the information you need to do
the project right, straight from the source (248 pages).
P5007521 Mopar Crate Motor Installation Manual

A. B.
B. Mopar Small Block “A” Engines
This book from Mopar contains Small Block engine speed secrets
and performance modifications, highlighted by hundreds of photos,
illustrations, tables and charts. Covers 273-318 and 340-360 “A”
engines and Old Style 277-301-318 “A” engines. Also includes
information on blueprinting, carburetion, ignition systems, oval
track and drag racing package recommendations and more! The
most comprehensive book ever published on Mopar Small Block
engines. A must for every Small Block owner/racer (400 pages).
P4876826 Mopar Small Block “A” Engines
C. Hemi® (Muscle Car Color History Series)

By Anthony Young. History of the Hemi V8 engine and
Hemi-powered cars. Copyright 1991 Motorbooks
International (128 pages).
C. D.
P5249646AB Hemi (Muscle Car Color History Series)
D. Barracuda & Challenger

(Muscle Car Color History Series)
By Paul Zazarine. Color history of the great Plymouth and
Dodge E-Body muscle cars of 1964–74. Copyright 1991 by
Motorbooks International (128 pages).
P5249647AB Barracuda & Challenger

E. Charger, Road Runner & Super Bee

By Paul A. Herd and Mike Mueller. Color history of all the
great Dodge and Plymouth B-Body muscle cars. Copyright
1994 by Motorbooks International (128 pages).
E. F.
P5249648AB Charger, Road Runner & Super Bee
F. Charger, Road Runner & Super Bee

Restoration Guide
By Paul A. Herd. If you’re restoring a classic Chrysler B-Body
vehicle, you need this restoration guide in your shop. With
more than 300 pages, this impressive book features a guide
to authenticity for all 1968–71 B-Bodies, an encyclopedia
of original parts, options, serial numbers and much more.
It’s everything you need for a professional restoration job.
Copyright 1994 by Motorbooks International (320 pages).
P5249656AB Charger, Road Runner & Super Bee

Restoration Guide
G. Chrysler, Dodge & Plymouth Muscle G.

By Anthony Young. The exciting history of Dodge, Plymouth
and Chrysler muscle cars presented in full color. Copyright
P5007517AB Chrysler, Dodge & Plymouth Muscle

128
BOOKS
A. Dodge Dart & Plymouth Duster
By Steve Stratham. Although they started their lives as economy
cars, the Dodge Dart and Valiant-based Plymouth Duster grew
into their own as true high-performance muscle cars. The
transformation took place in 1967 when Mopar shoehorned in a
Big Block 383 cid V8. There was no logical reason for this much
power in an economy car other than the fact that horsepower
fever had officially taken over Detroit. This book chronicles the
life and times of these classic Mopar muscle cars. Copyright
P5007691AB Dodge Dart & Plymouth Duster
A. B. B. Hemi: The Ultimate American V-8

By Robert Genat. For muscle car fans, the name says it all. Check
out the Hemi in all its glory in this new book about one of the most
famous engines in modern history. With full-color photos of your
favorite Hemi-powered vehicles, this book will satisfy the muscle
car lover in everyone. The book examines Hemi engines from the
past and present, making it a must-have collectible for Hemi fans.
P5007919AB Hemi: The Ultimate American V-8
C. Hemi Muscle Cars

By Robert Genat. A colorful history of Dodge and Plymouth
Hemi-powered production cars. Printed in full color. Copyright
P5007516AB Hemi Muscle Cars

C. D.
D. Plymouth 1946–1959
By Jim Benjaminson. Extensive pictorial history of the
classic post-war Plymouth production models and prototypes.
P5249652AB Plymouth 1946–1959
E. Dodge & Plymouth Muscle Car Red Book

By Peter C. Sessler. Covers 1964–74 serial numbers, options
and specs, colors and codes, photos and history. Copyright
1991 Motorbooks International (192 pages).
P5249650AB Dodge & Plymouth Muscle Car Red Book
F. Chrysler Muscle Cars (Enthusiast Color Series)

By Mike Mueller. Pictorial color history of Chrysler muscle
E. F. cars. Copyright 1993 Motorbooks International (96 pages).
P5249649AB Chrysler Muscle Cars

(Enthusiast Color Series)
G. Forward: The American Heritage

of DaimlerChrysler
See the cars that started it all, as well as the exciting new cars
and trucks that are keeping the DaimlerChrysler tradition alive and
well. This book features outstanding photography of your favorite
vehicles, old and new, along with a comprehensive historical
narrative. Copyright 2002 by Motorbooks International (144 pages).
P5007920AB Forward: The American Heritage of

DaimlerChrysler
H. Chrysler
G. H. By Dennis Adler (forward by Tom Gale). Full-color history of
Chrysler Corporation from 1925 to 2000, including Chrysler,
Dodge, DeSoto, Plymouth and Imperial brands. Copyright
P5007461AB Chrysler
129
BOOKS
A. Service Manuals and Parts Catalogs on CD-ROM
Servicing your vintage Mopar or cooking up and researching
part numbers just got a lot easier. Easy to read, these CD-ROMs
for your computer offer an alternative to scrounging swap meets
for those hard-to-find manuals or catalogs.
P4510779 1962 Plymouth/Valiant Service Manual

P4510782 1965 Plymouth Service Manual
P4510788 1971 Imperial/Chrysler/Plymouth
Body Service Manual
Chassis Service Manual
Body Service Manual
Body Service Manual
Body Service Manual
P4510761AB 1962 Dodge Service Manual A.
P4510762AB 1963 Dodge Service Manual
P4510763 1964 Dodge Service Manual
(Charger, Coronet, Super Bee)
(Dart, Swinger, Challenger)
P4510771 1971 Dodge Body Service Manual
P4510772 1971 Dodge Chassis Service Manual
P4510796 1962 Chrysler/Dodge/Plymouth Master Parts Book
(Includes Trim Section)
P4510805 1970–1971 Chrysler/Dodge/Plymouth Passenger
Car Parts Book — Enhanced Trim Section
130
LICENSEE LISTING
131
LICENSEE LISTING
The following independent firms are currently licensed by Mopar to use Mopar’s trademarks on the products shown. This list is subject to change. No warranty, either express or implied, is given by
Mopar with respect to the products offered by these firms.
Licensee Name Sales Contact Info Products Company Web Site Shows/Events Attended
Restoration intake manifolds: For 426 Max
Wedge, Max Wedge style for 440 engine,
Performance Line Sales
A & A Automotive and Hemi Cross Ram magnesium intake (PN
PH: (317) 831-5610 www.aandatrans.com National Chrysler Events
Transmission Repair, Inc. FAX: (317) 831-9710
RHMCRIM), Hemi Cross Ram aluminum intake
(PN RHMCRIA), Hemi inline two 4-bbl intake
manifolds in both magnesium and aluminum.
Mopar batteries, Group Number 24 and 27,
Mopar Nationals in
PH: (800) 426-7580 having the following part numbers: G10M,
Columbus, OH; Chryslers
Antique Auto Battery FAX: (330) 425-4642 G20M, G24M, G27M, G24M>, G27M>, G24ME/
www.antiqueautobattery.com at Carlisle, PA; Spring and
Mfg. E-MAIL: info@antiqueautobattery. HD, G24ME/ML, G27ME/ML, G24ML/HD, G24R/
Fall Carlisle; Mopars at
com HT, G24R/TT, G24M>,G27ME/HD, G27ML/HD,
Englishtown, NJ
and G24R/E-L .
PH: (800) 352-8216 Restoration embroidered floor mats with Muscle
SEMA Show and SEMA
Auto Custom Carpets, Inc. FAX: (800) 516-8274 Car logos, Jeep logos, L’il Red Express logos www.accmats.com Expo
E-MAIL: [email protected] and others.
Mopar Nationals in
Auto Restoration Parts PH: (804) 275-2155 Radiator hoses for 1975 and earlier Dodge,
www.rogergibsonautorestoration.com at Carlisle, PA; Chrysler
Supply, LLC FAX: (804) 743-8252 Chrysler and Plymouth vehicles.
Classic; Mopars at
Englishtown, NJ
Restoration body parts for A-, B-, and E-Body
PH: (330) 725-3990 vehicles including door handles, light lenses, Chryslers at Carlisle,
B/E & A Restoration Parts E-MAIL: BEARestoration@adelphia. turn signal lenses, fender gills, hub caps, PA, Mopar Nationals in
com marker housings, valance inserts. 1970-71 Columbus, OH
Barracuda grilles.
Vehicle Shop and Owners manuals for Chrysler
vehicles 1941-1969, Dodge Truck 1940-1979, Spring & Fall Carlisle
PH: (508) 872-9173
Bob Johnson Auto Dodge vehicles 1955-1960, Plymouth 1957-1972, Show; Fall Hershey,
FAX: (508) 626-0991 www.autopaper.com
Literature DeSoto 1954-1955, Jeep 1946-1987 and Mopar PA Show; Chryslers at
E-MAIL: [email protected] Parts Manuals 1955-1971 and Mopar Owners Carlisle, PA
Manual 1961-1962.
Restoration body parts for 1940-1964 Willys
and Jeep: Lower windshield panel, rear end
panel, tail gate, custom tail gate with large
Classic Enterprises PH: (715) 537-5422 lettering, custom rear end panel with large www.classicent.com
Limited International lettering and hoods all in unfinished steel.
Forward side panel and restoration tailgates
for 1981 and older Dodge trucks.
Printed shop and owners manuals for vehicles
(CD-ROM to be available soon): Dodge Dart
(1965-1975); Dodge Coronet/Challenger
(1960-1975); Dodge Charger (1966-1975);
Coastal Offset PH: (951) 340-0770 Plymouth (1936-1946); Plymouth (1947-1954);
Preparations, Inc. FAX: (951) 340-0771 Plymouth Fury/Sport Fury (1957-1964); Plymouth
Belvedere (1955-1975); Plymouth Barracuda
(1965-1975), Plymouth Satellite (1964-1975);
Dodge Trucks (1936-1975).
Restoration mufflers and various decals,
emblems, and stripe kits for 1970-71
Dales Cuda Shop FAX: (330) 823-6605 E-Body, 1968-71 B-Body and 1969-74
National Mopar Events
A-Body vehicles. 1970 front insert valence.
1962 and 1963 Guide to the Plymouth Super
Stock Package cars, 1964 Guide to the Plymouth
PH: (407) 330-9100 Super Stock and Commando Package, 1962 and
Darryl Davis FAX: (407) 330-9090 1963 Guide to the Dodge Ramcharger Package
E-MAIL: [email protected] cars and 1964 Guide to the Dodge Ramcharger
and Hemi Charger Packages.
Shop, Chassis, Service, Electrical, Body,
Detroit Iron Information PH: (800) 893-8122 and Parts manuals for 1930-1989 Dodge,
www.detroitironis.com
Systems, LLC E-MAIL: [email protected] Chrysler, Plymouth, Jeep, Imperial, DeSoto
and AMC vehicles.
Safety standard/VIN door jamb decal, underhood,
E.C.S. Automotive PH: (636) 207-7767 door jamb and trunk vehicle identification, www.ecsautomotive.com
Concepts, LLC E-MAIL: [email protected] emissions and service decals.
PH: (330) 493-1420 Front and rear spoilers and wings, hood scoops, Mopar Nationals in
First Place Auto Products FAX: (330) 493-0241 rear window louvers, racing mirrors for 1968- www.fpap.com Columbus, OH; Chryslers
E-MAIL: [email protected] 1976 Dodge, Chrysler and Plymouth vehicles. at Carlisle, PA
1960s and 1970s Vehicle Production Option Code
Galen’s Tag Service, LLC PH: (608) 326-6346 books, Vehicle Option and Accessory Reports
www.gvgovier.com National Mopar Events
(GTS) FAX: (608) 326-8061 and related manuals for Plymouth, Dodge and
Chrysler vehicles.
132
LICENSEE LISTING
Remanufactured radiators and radiator tanks for

Spring Fling Chrysler
all Dodge, Chrysler and Plymouth vehicles from
Show, Mopar Nationals in
PH: (800) 537-3775 Columbus, OH; Mopars in
Glen-Ray Radiators FAX: (715) 842-9626
model years 1979 and older. New radiators for
the Park in MN; Monster
1968 to 1971 model year Dodge, Chrysler and
Plymouth vehicles.
Mopar Weekend in
St. Louis, MO
PH: (800) 316-5337 / (512) 797-1664 Restoration decals and tape stripes for 1990
FAX: 325-388-2088 and earlier Jeep vehicles including CJ 5, CJ 7,
Golden Eagle Decal E-MAIL: mike@goldeneagledecals. CJ 8, Wrangler and full size Jeep vehicles and
www.goldeneagledecals.com Easter Jeep Safari/MOAB
com Jeep pickups.
B-Body steering wheel. Restoration body parts
for 1968-1970 Charger, 1970-1974 Barracuda,
Goodmark Industries, Inc. PH: (770) 339-8557 1970-1974 Challenger, 1969 Road Runner,
www.goodmarkindustries.com
1968-1970 “B” bodies. Restoration floor mats.
Restoration decals and stripe kits for 1980 and
Graphic Express PH: (352) 341-0077 older model year Dodge, Chrysler, Plymouth and www.graphic-express.com
AMC vehicles.
Contact Teresa McKinney SEMA Show, ALOA
PH: (423) 787-8892
Hurd Corporation FAX: (423) 787-8817
Valet key blank and molded head key blank. www.hurdlock.com (Assoc. Locksmith of
America) Show
E-MAIL: [email protected]
PH: (330) 376-8181 Keys and key rings with Restoration logos
Jessers Classic Keys FAX: (330) 384-9129 (Pre-1980 model years).
National Mopar Events
Restoration decals for air cleaners, valve covers,

engine compartments, emissions, interior,
Jim Osborn PH: (770) 962-7556 interior tags, exterior, chassis, trucks, tire
www.osborn-reproduction.com National Chrysler Events
Reproductions, Inc. FAX: (770) 962-5881 pressure, tune-up specs and stripe kits. Also and SEMA
manuals for parts, service, owners, performance,
wiring design, facts, etc.
PH: Marco Machi (800) 334-1381 Non-transponder/non-technology key blanks for
Kaba Ilco Corp. www.kaba-ilco.com
EXT: 252 the replacement market.
Spark plug wire sets for 1950-1980 model years
Lectric Limited, Inc. PH: (708) 563-0400 for Dodge, Chrysler, Plymouth and Jeep vehicles.
www.lectriclimited.com
Restoration PVC and carpeted floor mats;

Legendary Auto Interiors PH: (800) 363-8804 restoration seat upholstery and door panels for
www.legendaryautointeriors.com National Chrysler and
Ltd. FAX: (800) 732-8874 1979 and earlier model year Dodge, Chrysler, Mopar Events
Plymouth, Jeep and AMC vehicles.
M & H Electric PH: (562) 926-9552 Engine Restoration Products: Battery cables for
www.wiringharness.com
Fabricators, Inc. FAX: (562) 926-9572 1955-1981 A, B, C, and E body vehicles.
PH: (660) 263-7444 Formed steel and die stamped steel tailgates for
Mack Hils, Inc. E-MAIL: [email protected] 1936-1950 Dodge and Plymouth pickup trucks.
www.mackhils.com
B- and E-Body Tubular Upper Control Arm

brushed and adjustable; A-Body Tubular Control
PH: (408) 559-6633 Arm, brushed and adjustable; B- and E-Body
Magnum Force Inc. FAX: (408) 559-5283 Tubular Suspension Conversion, manual and
www.magnumforce.com
power steering; A-Body Tubular Suspension
Conversion, manual and power steering.
Restoration body parts including antenna kits,
molding kits, grilles, hood moldings, rocker
PH: (912) 383-0172
Metro Parts moldings, wheel opening moldings, light www.metropartscompany.com National Mopar Events
FAX: (912) 384-5595 bezels, door moldings, trunk moldings, body
side moldings.
Car and Truck Manuals on CD-ROM: Service,
parts, chassis, body, electrical and technical
manuals, including supplements and bulletins on
CD-ROM. 1914-1934 Dodge Brothers/Graham
PH: (203) 237-4795
MuscleCARS, LLC FAX: (928) 752-8543
Bros.and Chrysler; 1928-1961 DeSoto; 1928-1959 www.moparmanuals.com National Mopar Events
Hudson; 1928-1989 Chrysler/ Dodge/ Plymouth;
1935-1937 Graham-Paige; 1940-1989 Mopar;
1941-1989 Willys and Jeep; 1941-1958 Nash;
1947-1954 Kaiser-Frazer; 1957-1986 AMC.
PH: (770) 614-6101 Willys and Jeep Restoration body parts;
OMIX-ADA, Inc. FAX: (770) 614 - 6069 1946-1971 Willys CJ’s; 1941-1945 Willys MB; www.omix-ada.com
E-MAIL: [email protected] 1955-1991 Jeep CJ’s; 1987-1995 YJ Wrangler.
133
LICENSEE LISTING
Lenses: 1970 Challenger tail light, side
marker light and reverse light lenses; 1970-71
Challenger side marker lenses; 1970-71’Cuda
tail light lenses; 1970-74 Challenger front
park light lenses. Hoods: Challenger TA hood,
Cuda AAR hood; 1970 E-Body seat belt guides;
PH: (215) 957-1622 Add-A-Gauge consoles (Challenger, Cuda, truck
Penstar Reproductions FAX: (215) 957-5232 in-dash). Paint: Argent paint (light, medium and www.penstar.net National Mopar Events
dark colors), Restoration paint (Grill Silver, Satin
Black, Organosol Black, Jack Gray, Tail Panel
Red, Lid Orange, Horn Purple and Dash Black).
Decals (Dodge, 360 Magnum, tape stripe kits
including hockey stick and reverse “C”); Billboard
Stripe Kits (Dakota); Strobe Stripe Kits (Ram and
Dakota), Bumblebee Stripe Kit.
PH: (850) 878-1450 Restoration decals and stripe kits for 1980 and National Mopar Events;
Performance Car Graphics FAX: (850) 878-3161 earlier Dodge, Chrysler and Plymouth vehicles.
www.performancecargraphics.com Chryslers at Carlisle, PA
E-MAIL: [email protected]
Reproduction engine designation decals, exterior
Phoenix Graphix Inc. PH: (800) 941-4550 decals and stripe kits.
www.phoenixgraphix.com
PH: (800) 235-8788 Fan belts for 1964 to 1974 Chrysler, Plymouth National Mopar Events;
Quanta Products, LLC www.quantraproducts.com
Questions: (410) 658-5700 and Dodge vehicles. Chryslers at Carlisle, PA
Windshield washer bottle reservoir, spark plug
wire clip, ballast resistor, heater hoses, radiator
overflow tank, body plugs, body bumpers,
license plate light lenses, drain doors, Pentastar
fender emblem, and gas tank filler neck seals
Quirey Quality PH: (812) 963-6097 for 1979 and earlier Dodge, Chrysler and
Engineering FAX: (812) 963-9232 Plymouth vehicles. Seat hinge covers, Rallye
dash steering column covers, dash vents, seat
belt clips, seat belt guides, speaker grilles,
accelerator pedal kits, clutch push rod boots,
positive and negative battery cables.
Mopar Nationals in
PH: 800) 544-3312 Owners manuals, parts books and shop manuals
R & B Holt Enterprises FAX: (937) 778-4196 for 1924 to 1991 Dodge, Chrysler, Plymouth, www.autobooksbishko.com at Carlisle, PA; Spring and
E-MAIL: [email protected] Jeep, AMC and DeSoto vehicles.
Fall in Hershey, PA
PH: (978) 363-5407 Hubcaps for 1937-53 Dodge and Plymouth
FAX: (978)-363-2026 vehicles, nameplates for 1939-53 Dodge and
Roberts Motor Parts, Inc. www.robertsmotorparts.com
E-MAIL: sales@robertsmotorparts. Plymouth vehicles, and tail light lenses for
com 1928-53 Dodge and Plymouth vehicles.
1968-69 Charger front turn signal lenses (set,
right and left); 1968-69 Plymouth B-Body front
turn signal lenses (set, right and left); 1969
Chrysler (all bodies) side marker lenses (set,
PH: (256) 247-1332
Stephens Performance right and left); 1970-71 Dodge/Plymouth A/B www.stephensperformance.com
FAX: (256) 247-1337 body side marker lenses (set, right and left).
1972-74 Barracuda front turn signal lenses,
1971-74 Charger front turn signal lenses,
1970-74 Challenger door handles.
Non-transponder/non-technology key blanks
PH: (toll-free): (877) 251-8798 for the replacement market for 1990 through ALOA (Assoc. Locksmith
Strattec Security Corp. http://aftermarket.strattec.com
FAX: (877) 251-8799 2003 and JEEP “rock” non-transponder key of America) Show
(part No. 709850).
Trim parts/emblems utilizing the Willys
trademark: specifically WILLYS script, WILLYS
Willys Replacement Parts PH: (909) 980-3022 dash emblem, WILLYS front trim and WILLYS www.willysreplacementparts.com
grille badge for 1933 to 1942 model year
WILLYS vehicles.
Restoration decals, nameplates, emblems
and ornaments. 1966-74 Plymouth and Dodge
Mopar Nationals in
Year One, Inc. PH: (800) 932-7663 service manuals, heater hoses and exhaust
www.yearone.com Columbus, OH; Chryslers
manifold set.
at Carlisle, PA
134
VEHICLE
IDENTIFICATION
135
VEHICLE IDENTIFICATION
DODGE AND PLYMOUTH VIN IDENTIFICATION 2 = Belvedere (1964), 440 (1964), Coronet (1965)
3 = Valiant V200, Dart 270, Belvedere II (1965), Coronet 440 (1965),
1964–65 Models Fury (1964), Polara (1964)
1964–65 models have the Vehicle Identification Number located on a 4 = Valiant Signet, Barracuda (1964), Dart GT, Satellite (1965),
stainless steel plate riveted to the left front door hinge pillar post. Coronet 500 (1965), Sport Fury (1964)
5 = Valiant V100 Wagon, Dart 170 Wagon, Belvedere I Wagon (1965),
Coronet Wagon (1965), Savoy Wagon (1964), 330 Wagon (1964)
DODGE 6 = Belvedere Wagon (1964)
Model Year
7 = Valiant V200 Wagon, Dart 270 Wagon, Belvedere II Wagon (1965),
Coronet 440 Wagon (1965), Fury Wagon (1964)
744710 0 0 01 8 = Barracuda (1965), Belvedere Taxi (1965), Coronet Taxi (1965)
9 = Belvedere Police (1965), Coronet Police (1965)
0 = Belvedere Super Stock (1965), Coronet Super Stock (1965)
Car Series Assembly Sequential Production
Make Number Plant Number 3rd Digit: Model Year
1st Digit: Car Make 4 = 1964
1 = Valiant Slant-6, Barracuda Slant-6 5 = 1965
2 = Plymouth Slant-6 (1964) / Dart Slant-6 (1965)
3 = Plymouth V8 (1964) / Belvedere Slant-6 (1965) 4th Digit: Assembly Plant
4 = Dodge Slant-6 (1964) / Coronet Slant-6 (1965) 1 = Lynch Road, Detroit, MI
6 = Dodge V8 (1964) 2 = Dodge Main, Hamtramck, MI
7 = Dart slant-6 (1964) 3 = Jefferson Avenue, Detroit, MI
D = Dodge (1965) 4 = Belvidere, IL
L = Dart V8 5 = Los Angeles, CA
R = Belvedere V8 (1965) 6 = Newark, DE
V = Valiant V8 / Barracuda V8 7 = St. Louis, MO
W = Coronet V8 (1965) 9 = Windsor, Ontario
2nd Digit: Series Number 5th Through 10th Digits:

1 = Valiant V100, Dart 170, Belvedere I (1965), Coronet Deluxe (1965), Sequential production number starting with 100001
330 (1964), Savoy (1964), Polara (1965)
1966–67 Models 5th Digit: Engine

1966–67 models have the Vehicle Identification Number located on a A = 170 cid/101 hp (1966), or 115 hp (1967) 1-bbl Slant-6
stainless steel plate riveted to the left front door hinge pillar post. B = 225 cid/145 hp 1-bbl Slant-6
C = Special Order Slant-6
D = 273 cid/180 hp 2-bbl V8
DODGE D = 273 cid/235 hp or 275 hp (1966) 4-bbl V8
Series Number Assembly Plant
E = 273 cid/235 hp 4-bbl V8 (1967)
XP29H6210 0 0 01 E
F
=
=
318 cid/230 hp 2-bbl V8 (1966)
318 cid/230 hp 2-bbl V8 (1967)
F = 361 cid/265 hp 2-bbl V8 (1966)
G = 383 cid/270 hp 2-bbl V8 (1967)
Car Body Engine Model Sequential Production G = 383 cid/325 hp 4-bbl V8 (1966)
Make Style Year Number
H = 383 cid/325 hp 4-bbl V8 (1967)
1st Digit: Car Make H = 426 cid/425 hp 2x4-bbl V8 Hemi (1966)
B = Barracuda (1967) V = Valiant J = 426 cid/425 hp 2x4-bbl V8 Hemi (1967)
L = Dart W = Coronet L = 440 cid/375 hp 4-bbl V8 (1967)
R = Belvedere / Satellite X = Charger
6th Digit: Model Year
2nd Digit: Series Number 6 = 1966
E = Belvedere Fleet, Coronet Fleet 7 = 1967
L = Valiant 100, Dart 170, Belvedere I, Coronet Deluxe
H = Valiant 200 (1966), Valiant Signet, Dart 270, Belvedere II, Coronet 440, 7th Digit: Assembly Plant
Barracuda (1967) 1 = Lynch Road, Detroit, MI
K = Belvedere Police, Coronet Police 2 = Dodge Main, Hamtramck, MI
P = Barracuda (1966), Dart GT, Satellite, Coronet 500, Charger 3 = Jefferson Avenue, Detroit, MI
S = Belvedere GTX (1967), Coronet R/T (1967) 4 = Belvidere, IL
T = Belvedere Taxi, Coronet Taxi 5 = Los Angeles, CA
6 = Newark, DE
3rd and 4th Digits: Body Style 7 = St. Louis, MO
21 = 2-Door Sedan 8 = Export
23 = 2-Door Coupe 9 = Windsor, Ontario
27 = 2-Door Convertible
29 = 2-Door Sports Coupe 8th Through 13th Digits:
41 = 4-Door Sedan Sequential production number starting with 100001
45 = 4-Door Station Wagon (6 passenger)
46 = 4-Door Station Wagon (9 passenger)
136
DODGE AND PLYMOUTH VIN IDENTIFICATION 5th Digit: Engine
A = 170 cid/115 hp 1-bbl Slant-6 (1968-69)
1968–74 Models B = 225 cid/145 hp 1-bbl Slant-6 (1968-69)
On 1968–74 models, the Vehicle Identification Number is located on a stainless steel B = 198 cid/125 hp (1970-71), 100 hp (1972), or 95 hp (1973–74) 1-bbl Slant-6
plate riveted to the left side of the instrument panel, visible through the windshield. C = Special order Slant-6 (1968–69)
C = 225 cid/145 hp (1970–71), 110 hp (1972), or 105 hp (1973–74) 1-bbl Slant-6
D = 273 cid/190 hp 2-bbl V8 (1968–69)
DODGE E = Special Order Slant-6 (1970–74)
Series Number Assembly Plant F = 318 cid/230 hp 2-bbl V8 (1968–69)
G = 383 cid/290 hp 2-bbl V8 (1968–69)
XS29J8B10 0 0 01 G = 318 cid/230 hp (1970–71), 150 hp (1972–74), 155 hp (1972), or 170 hp (1973–74
Road Runner) 2-bbl V8
H = 383 cid/330 hp or 335 hp 4-bbl V8 (1968–69)
H = 340 cid/275 hp (1970–71) or 240 hp (1972–73) 4-bbl V8
Car Body Engine Model Sequential Production
Make Style Year Number J = 426 cid/425 hp 2x4-bbl V8 Hemi (1968–69)
J = 340 cid/290 hp 3x2-bbl V8 (1970) (AAR & T/A)
L = 440 cid/375 hp 4-bbl V8 (1968–69)
1st Digit: Car Make L = 383 cid/290 hp (1970) or 275 hp (1971) 2-bbl V8
B = Barracuda L = 360 cid/200 hp or 245 hp 4-bbl V8 (1974)
J = Challenger M = Special order V8 (1968–69)
L = Dart M = 440 cid/390 hp 3x2-bbl V8 (1969) (Six Pack/6-bbl)
R = Belvedere / Satellite M = 400 cid/190 hp (1972), 175 hp or 185 hp (1973) 2-bbl V8
V = Valiant / Duster N = 383 cid/330 hp or 335 hp (1970) or 300 hp (1971) 4-bbl V8
W = Coronet/1971–74 Charger N = 400 cid/205 hp 4-bbl V8 (1974)
X = 1966–70 Charger P = 340 cid/275 hp 4-bbl V8 (1968–69)
P = 400 cid/255 hp (1972), 260 hp (1973), or 250 hp (1974) 4-bbl V8
2nd Digit: Series Number R = 426 cid/425 hp 2x4-bbl V8 Hemi (1970–71)
L = Valiant (1968–74), Duster (1970–74), Dart (1968–74), Dart Swinger (1968–70), U = 440 cid/375 hp (1970), 370 hp (1971), 280 hp (1972-73), 290 hp (1972), or 275 hp
Dart Swinger Special (1971–74), Demon (1971–72), Dart Sport (1973–74), (1974) 4-bbl V8
Belvedere (1968–70), Satellite Coupe (1971–74), Coronet (1968–74), Charger V = 440 cid/385 hp (1971) or 330 hp (1972) 3x2-bbl V8
Coupe (1971–74) Z = Special order V8 (1970–74)
M = Dart Swinger 340 (1969–70), Demon 340 (1971–72), Dart Sport 340 (1973), Dart
Sport 360 (1974), Road Runner (1968–74), Road Runner Superbird (1970), Road 6th Digit: Model Year
Runner GTX (1972-74), Coronet Super Bee (1968–70), Charger Super Bee (1971) 8 = 1968
H = Valiant Signet (1968–69), Barracuda (1968–69), Barracuda ’Cuda (1969), Scamp 9 = 1969
(1971–74), Dart 270 (1968), Dart Custom (1969–74), Dart Swinger (1971–74), 0 = 1970
Satellite (1968–70), Satellite Sebring (1971–74), Satellite Custom (1971–74), 1 = 1971
Coronet 440 (1968–70), Charger (1970), Charger Coupe (1971–74), Coronet 2 = 1972
Custom (1971–74), Barracuda (1970–74), Challenger (1970–74), Challenger T/A 3 = 1973
(1970) 4 = 1974
P = Valiant Brougham (1974), Dart GT (1968–69), Dart SE (1974), Sport Satellite
(1968–70), Satellite Sebring Plus (1971–74), Satellite Brougham (1971), Regent,
7th Digit: Assembly Plant
Coronet 500, Charger (1968–69), Charger 500 (1970–71), Charger SE (1971–74),
A = Lynch Road, Detroit, MI
Coronet Brougham (1971), Crestwood (1971–74), Barracuda Gran Coupe
B = Dodge Main, Hamtramck, MI
(1970–71)
C = Jefferson Avenue, Detroit, MI
S = Duster 340 (1970–73), Duster 360 (1974), Dart GTS (1968–69), Dart GSS (1968),
D = Belvidere, IL
Challenger R/T (1970), GTX (1968-71), Coronet R/T (1968–70), Charger R/T
E = Los Angeles, CA
(1968–71), Charger 500 (early 1969), Barracuda ’Cuda (1970–74), Barracuda AAR
F = Newark, DE
’Cuda (1970), Challenger R/T (1970–71), Challenger Rallye (1972)
G = St. Louis, MO
X = Charger 500 (late 1969), and Charger Daytona (1969)
H = New Stanton, PA
O = Barracuda Super Stock (1968), Dart Super Stock (1968)
P = Export
K = Belvedere Police (1968–70), Satellite Police (1971–74), Coronet Police (1968–74)
R = Windsor, Ontario
N = Coronet New York Taxi (1970–71)
G = Coronet New York Taxi (1972–74)
T = Belvedere Taxi (1968–70), Satellite Taxi (1971–74), Coronet Taxi (1968–74) 8th Through 13th Digits:
Sequential production number starting with 100001
3rd and 4th Digits: Body Style
21 = 2-door Sedan
23 = 2-door Coupe
27 = 2-door Convertible
29 = 2-door Sports coupe
41 = 4-door Sedan
45 = 4-door Station Wagon (6 passenger)
46 = 4-door Station Wagon (9 passenger)
137
CHRYSLER FENDER TAGS
Chrysler fender tags, located on the inner fender on the engine bay, can be valuable sources of information. The following is a description of fender tag characteristics,
grouped by their similarities. As a general rule, fender tags are read from bottom to top and left to right.
1962–66 Models 1967–68 Models

The fender tags of 1962–66 cars are laid out in a very similar fashion. The For 1967 and 1968, the bottom three lines are changed completely as compared to
scheduled build date is under the left portion of the “SO NUMBER.” The number earlier tags. The bottom line at the left starts with two letters and two numbers
under “BDY” (body) represents the car line and model, which is the same as the which identify the car line and model (same as the first four characters of the VIN).
first three characters of the VIN. The number under “TRM” is the interior trim code, This is followed by a two-digit engine code, a one-digit transmission code, and then
while the exterior trim codes are found under “PNT.” Sometimes the paint and a three-digit tire code. Next is a three-digit build date, followed by the order number.
trim codes are transposed, but this should be fairly obvious. The row of uppercase Moving up to the third line from the bottom, numbers 1 through 8 appear here, which
letters (fourth line from the bottom) represents option categories. A number under denote categories. A number listed under any of the category numbers defines an
any of these letters defines an option in that letter’s category. The row of numbers option in that category. To the right of the 1–8 numbers you will find “AX” for axle,
at the top of the tag are not yet known, but are thought to be routing, shipping, “TRM” for the interior code, and “PNT” or “PAINT” for exterior colors. Continuing
or gate information on 1962–64 models. For 1965, these numbers may represent to the right, there is a grouping of letters “UBS.” The “U” is for upper interior door
option information in addition to routing information. Also for 1965, “A”, “B” and color, “B” is for buffed paint and “S” is for the stripe or accent color. The codes for
“C” take the place of 10, 11, and 12 in the production date for October, November these are listed directly below (on the second line from the bottom). The fifth row
and December. In 1966 the row of numbers at the top are replaced by a row of from the bottom is a row of uppercase letters representing option categories. At the
lowercase letters, which are another row of option categories. A number under top of the tag is a row of lowercase letters also representing option categories. A
any of these letters represents an option in that letter’s category. For information number under any of these category letters defines an option in that letter’s category.
on decoding the option codes, see our selection of books by Galen Govier in the For information on decoding the option codes, see our selection of books by Galen
Literature section. Govier in the Literature section.
1962–65 Models Axle Interior Paint
1234567890 abcdefghjkmnpqrstuwy
⊗ 10 123 ⊗
⊗ 6 8 6 ⊗
ABCDEFGHIJKLMNOPQRSTUVWXYZ ABCDEFGHIJKLMNOPQRSTUVWXYZ
823 82 168 5 7 2
12345678 AX TRM PNT UBS
SO NUMBER B DY TRM PNT 48 P6H PP1 Q
C 01 10 2 6 6 125 P2R WW1 W S 2 3 8 2 6 4 4 5 C 01 01 3 2 6
Build Car Line Interior Paint Car Line Engine Trans Tires Build Upper Door Paint
Date and Model and Model Date Buffed Paint
Striped or Accent
1966 Models
abcdefghjkmnpqrstuwy
⊗ 64 4 ⊗
ABCDEFGHIJKLMNOPQRSTUVWXYZ
823
S O N U M B E R B DY T R M PNT
C 01 3 4 1 8 2 WP27 H4X BB1CB
Build Car Line Interior Paint

Date and Model
With its prominent location on the driver’s fender, the fender tag is usually easy to
locate. 1965 and earlier cars may have it on one of the following locations: left inner
fender, right inner fender, right cowl panel, left radiator core support.
138
CHRYSLER FENDER TAGS
1969–74 Models 1969–70 Lynch Road Plant
(Except 69–70 Lynch Rd.) The 1969 Lynch Rd. plant fender tag is somewhat unique compared to other 1969
Fender tags were restyled for 1969. On the bottom line to the left, is a three- tags. The bottom row, to the left, has the four-character car line and model code
character code for the engine, followed by a three-character code for the (same as the VIN first four), followed by a three-character engine code. These are
transmission, then the actual VIN. The second line from the bottom starts with a followed by a two-character transmission code, then the three-digit build date and
two- or three-digit character paint code (which may be repeated) followed by a the vehicle order number. The second line from the bottom starts with the exterior
three or four character interior code (three for 1969; four for 1970 and later). Next color (usually two characters) followed by a three-character interior code and a two-
is a two- or three-character interior upper door color or type code (two for 1969; character upper interior door color code. Above these codes are a few selected codes,
three for 1970 and later). This is followed by the three-digit build date and the usually abbreviated actual option codes. Lynch Road tags typically list very few option
vehicle order number. The codes above these, with a couple of exceptions, are the codes, regardless of how the car was optioned. The fifth line from the bottom usually
actual selected option order codes. When moving from the bottom to the top of the contains three groups of three digits for the engine, axle, and transmission build
tag, characters “END,” “EN1” or “EN2” will appear if the code listing ends. If the codes. The top line is not yet known. In 1970, Lynch Road tags became more like other
factory ran out of space on one particular tag, “CTD” may appear, which means the plants, but still retained the three group, three-digit engine, axle and transmission
information is continued on another tag. We’ve never seen more than two fender codes on the fifth line from the bottom.
tags on any car, however.
Interior Upper Door Paint Exterior Engine Axle Trans Interior
02134 122336 9 A 19 2 5 4 4
⊗ ⊗ ⊗ 864 5 74 080 H51 ⊗
26
V7X END
1X 7X
V1X U 26 A33 N96 R26
FE5 D 6 X W T X 9 C 01 2 7 6 2 4 8 A8 A8 C6X X9
E86 D21 W S 2 3 V 1 B 1 3 74 5 5 XS29 E86 D21 C 01 2 2 6 5 7 1
Engine Exterior Trans Build V.I.N. Car Line Engine Trans Build Date
Date and Model
Upper Door Paint
IDENTIFYING CHRYSLER BODY SERIES
B-Body: 1969 Dodge

A-Body: 1969 Barracuda Charger
E-Body: 1970 Barracuda C-Body: 1970 Chrysler

300 Hurst
A-Body: 1964–76 Valiant, 1964–69 Barracuda, 1970–76 Duster, 1972–76 Scamp, E-Body: 1970–74 Barracuda, 1970–74 Challenger
1964–76 Dart, 1971–72 Demon, 1973–76 Dart Sport, 1969–76 Swinger F-Body: 1976–80 Volare, 1979–80 Duster, 1976–80 Road Runner,
B-Body: 1965–69 Belvedere, 1965–74 Satellite, 1968–75 Road Runner, 1970 1976–80 Aspen
Superbird, 1967–71 GTX, 1965–76 Coronet, 1968–71 Super Bee, M-Body: 1982–89 Gran Fury, 1978–89 Diplomat
1966–77 Charger, 1969 Daytona, 1975–78 Fury, 1977–78 Monaco, J-Body: 1980–83 Mirada, 1980–83 Cordoba, 1981–83 Imperial
1978–79 Magnum, 1975–79 Cordoba, 1979 300 R-Body: 1979–81 St. Regis, 1980–81 Gran Fury, 1979–81 Newport,
C-Body: 1965–74 Fury I/II/III, 1975–78 Gran Fury, 1965–76 Monaco, 1977–78 Royal 1979–81 New Yorker
Monaco, 1965–73 Polara, 1965–78 New Yorker, 1965–71 300 Y-Body: 1967–75 Imperial
139
Engine Code Per Body Data Tag 1966–68 Engine Codes Per Body Data Tag 1972–74 (cont.)
Code MYI MYO Engine HP Induction/Remarks Code MYI MYO CI HP Induction/Remarks
0.01 1966 1968 Special Order 8 CYL E24 74 74 225 105 1V
11 1966 1966 170 101 E25 72 72 225 110 1VHD
11 1967 1968 170 115 E25 73 74 225 105 1VHD
12 1966 1968 170 115 HD Clutch E44 72 74 318 150 2V
21 1966 1968 225 145 E44 73 73 318 170 2V
22 1966 1968 225 145 HD Clutch E55 72 73 340 240 4V
31 1966 1967 273 180 E56 74 74 360 200 4V
31 1968 1968 273 190 E57 72 72 360 175 2V
32 1966 1967 273 235 E57 73 73 360 163 2V w/N95 Pkg
41 1966 1966 318 230 Polysphere E57 73 73 360 170 2V
41 1967 1967 318 230 Canada Built E57 74 74 360 180 2V
41 1967 1968 318 230 US Built E58 74 74 360 245 4V
42 1966 1968 318 230 HD Clutch E63 72 72 400 181 2V w/N95 Pkg
51 1966 1966 361 265 E63 73 73 400 178 2V w/N95 Pkg
52 1968 1968 340 275 E63 72 72 400 190 2V
61 1966 1967 383 270 E63 73 73 400 175 2V
61 1968 1968 383 290 2V E63 73 73 400 185 2V
62 66 67 383 325 4V E63 74 74 400 185 2V
62 67 67 383 280 2V BH/LP E64 74 74 400 200 4V
62 68 68 383 330 4V E68 72 74 400 246 4VHP w/N95 Pkg
62 68 68 383 300 4V BH/LS E68 72 72 400 255 4VHP
62 68 68 383 335 4V RM/WM E68 73 73 400 260 4VHP
73 66 68 426 425 2-4BBL Hemi E68 74 74 400 250 4VHP
81 66 68 440 350 4V Single EXH E85 72 72 440 212 4V w/N95 Pkg
82 66 66 440 365 4V E85 72 72 440 221 4V PD w/N95 Pkg
83 67 68 440 375 4V E85 73 73 400 208 4V w/N95 Pkg
91 66 68 Special Order 8 CYL E85 72 72 440 225 4V C
E85 72 72 440 230 4V PD
Engine Code Per Body Data Tag 1969-71 E85 73 73 440 215 4V C
Sales Code MYI MYO CI HP Induction/Remarks E85 73 73 440 220 4V
E11 69 69 170 115 1V E85 74 74 440 230 4V
E22 70 71 198 125 1V E86 72 72 440 245 4VHP C
E24 69 71 225 145 1V E86 72 72 440 280 4VHP RW
E25 69 71 225 145 1V E86 73 73 440 280 4VHP
E31 69 69 273 190 2V E86 74 74 440 275 4VHP
E44 69 71 318 230 2V E87 72 72 440 330 3X2VHP RW
E55 69 71 340 275 4V
E55 70 70 340 290 6BBL/Six Pack Engine Code Per Body Data Tag 1975–80
E57 70 71 360 255 2V Code MYI MYO Desc HP Cyl. VIN Family
E61 69 70 360 290 2V E12 78 78 1.7 LITRE 70 4 A 4CYL
E61 71 71 383 275 2V E12 78 78 1.7 LITRE 75 4 A 4CYL
E63 69 69 383 330 4V E12 79 80 1.7 LITRE 65 4 A 4CYL
E63 69 70 383 330 4V E12 79 79 1.7 LITRE 70 4 A 4CYL
E63 70 70 383 330 4V E12 80 80 1.7 LITRE 65 4 A 4CYL
E63 69 69 383 335 4V E12 79 80 1.7 LITRE 65 4 A 4CYL
E63 70 70 383 335 4V E24 75 80 225 1BBL 90 6 C RG
E63 71 71 400 190 2V E24 75 75 225 1BBL 95 6 C RG
E65 71 71 383 300 4V E24 76 79 225 1BBL 100 6 C RG
E74 69 71 426 425 2-4BBL E24 76 80 225 1BBL 90 6 C RG
E85 69 70 440 350 4V E25 75 80 225 1BBL 6 C RG
E85 71 71 440 335 4V E26 77 80 225 2BBL 110 6 D RG
E85 69 69 440 375 4V E27 80 80 225 2BBL 6 D RG
E85 70 70 440 360 4V E44 75 75 318 2BBL 140 8 G LA
E86 69 70 440 375 4V E44 75 75 318 2BBL 145 8 G LA
E86 71 71 440 370 4V E44 75 75 318 2BBL 135 8 G LA
E86 69 69 440 390 6BBL/Six Pack E44 75 75 318 2BBL 150 8 G LA
E44 76 76 318 2BBL 140 8 G LA
Engine Codes Per Body Data Tag 1972–74 E44 76 76 318 2BBL 150 8 G LA
Code MYI MYO CI HP Induction/Remarks E44 77 77 318 2BBL 135 8 G LA
E22 72 72 198 94 1V w/N95 Pkg E44 77 77 318 2BBL 145 8 G LA
E22 72 72 198 100 1V E44 77 77 318 2BBL 135 8 G LA
E22 73 74 198 95 1V E44 78 78 318 2BBL 140 8 G LA
E24 72 72 225 97 1V1V w/N95 Pkg E44 78 78 318 2BBL 145 8 G LA
E24 72 72 225 110 1V E44 78 78 318 2BBL 140 8 G LA
E24 73 73 225 98 1V w/N95 Pkg E44 78 78 318 2BBL 140 8 G LA
E24 73 74 225 105 1V E44 79 79 318 2BBL 135 8 G LA
140
Engine Code Per Body Data Tag 1975–80 (cont.) Engine Code Per Body Data Tag 1975–80 (cont.)
Code MYI MYO Desc HP Cyl VIN Family Code MYI MYO Desc HP CYL VIN FMLY
E44 80 80 318 2BBL 120 8 G LA E63 75 76 400 2BBL 175 8 M B
E45 78 80 318 2BBL 8 G LA E64 75 75 400 4BBL 185 8 N B
E46 78 80 318 4BBL 155 8 H LA E64 75 75 400 4BBL 190 8 N B
E47 79 80 318 4BBL 155 8 H LA E64 75 75 400 4BBL 195 8 N B
E48 80 80 318 4BBL 155 8 H LA E64 76 76 400 4BBL 210 8 N B
E56 75 75 360 4BBL 190 8 J LA E64 77 78 400 4BBL 190 8 N B
E56 76 76 360 4BBL 175 8 J LA E68 75 75 400 4BBL 235 8 P B
E56 77 77 360 4BBL 155 8 J LA E68 75 75 400 4BBL 240 8 P B
E56 79 80 360 4BBL 195 8 J LA E68 76 76 400 4BBL 240 8 P B
E57 75 75 360 2BBL 180 8 K LA E68 77 78 400 4BBL 190 8 P B
E57 76 76 360 2BBL 170 8 K LA E85 75 75 440 4BBL 210 8 T RB
E57 77 78 360 2BBL 155 8 K LA E85 75 75 440 4BBL 215 8 T RB
E57 79 79 360 2BBL 150 8 K LA E85 76 76 440 4BBL 200 8 T RB
E57 80 80 360 2BBL 130 8 K LA E85 76 76 440 4BBL 205 8 T RB
E58 75 75 360 4BBL 230 8 L LA E85 77 78 440 4BBL 185 8 T RB
E58 76 76 360 4BBL 220 8 L LA E85 77 78 440 4BBL 195 8 T RB
E58 77 78 360 4BBL 160 8 L LA E85 77 78 440 4BBL 185 8 T RB
E58 77 78 360 4BBL 175 8 L LA E86 75 75 440 4BBL 260 8 U RB
E58 78 78 360 4BBL 160 8 L LA E86 75 75 440 4BBL 265 8 U RB
E58 79 79 360 4BBL 190 8 L LA E86 76 76 440 4BBL 250 8 U RB
E58 79 79 360 4BBL 195 8 L LA E86 76 76 440 4BBL 255 8 U RB
E58 80 80 360 4BBL 185 8 L LA E86 77 78 440 4BBL 185 8 U RB
E63 75 76 400 2BBL 165 8 M B E86 77 78 440 4BBL 195 8 U RB
141
ENGINE COMPONENT CASTING NUMBERS RB Big Blocks (cont.)
Casting No. CID Year Family Remarks
Engine Block Casting Numbers 2406730 426 1963–65 RB Wedge
2205697 413+426 1959–65 RB Passenger Car
2468030 413+426 RB Wedge
A/LA Small Blocks 2468330 426 1964–71 RB Hemi
Casting No. CID Year Family Remarks 2658836 426 RB Industrial
2465330 273 1964–66 LA 1852029 426 1962–65 RB Wedge
2536130 273 1965 LA 2406730 426 1963–65 RB Wedge + Max Perf
2463252 273 LA 2440873 426 RB Wedge
2465330 273 1964–66 LA 2532230 426 1964–66 RB Wedge, Max Perf +
2536130 273 1965 LA Industrial
2806030 273 1966–69 LA 2658836 426 RB Industrial
2806130 273 1965–69 LA 2536430 440 1966–72 RB
2466090 318 LA 3698830-440 440 1973–78 RB
2536030-318 318 1967–75 LA 2536430 440 1966–72 RB
2566080 318 LA 3698830-440 440 1972–78 RB
2806030 318 1967–74 LA 4006630-440 440 1975–78 RB
2466090 318 LA
2536030-318 318 1967–75 LA
2566080 318 LA 426 Hemi Blocks
2806030 318 1967–74 LA Casting No. CID Year Family Remarks
4104230-318 318 RACE ENGINE LA Painted Orange 2468330-1 or 2 426 1964–65 RB Race Hemi
2264230 318 1960–66 A Distributor
2468230 318 A Area=Rounded
2532630-318 318 A 2468330-1 or 2 426 1966–71 RB Street Hemi
2264230 318 1960–67 A Polysphere Distributor
2468230 318 A Polysphere Area=Squared
2532630-318 318 A Polysphere
2780930-340 340 1968–73 LA Engine Stampings
3577130TA-340 340 1970–71 LA Trans Am Decoding Vehicle Serial Number on the Engine
2780930-340 340 1968–73 LA Starting in 1968, all engine and major driveline components are stamped with the
3577130TA-340 340TA 1970–71 LA Trans Am Vehicle Identification Number (VIN) as a theft deterrent. During the first two years
3418496-360 360 1971–74 LA (until 1970), Chrysler usually stamped the entire number on the rail. From 1970 on,
3870230 360 1975–Up LA they stamped only the last eight digits on the engine. Slant-6 engines have this
3418496-360 360 1971–74 LA number stamped below the cylinder head on the passenger side of the block. V8
3870230 360 1975–78 LA engines are stamped on the driver’s side upper rear of the block in 1968, and above
4179930-360 360 1975–93 LA the passenger side oil pan rail near the motor mount on 1969-and-later engines.
Most warranty engines will not have this stamping (although the technicians were
B Big Blocks supposed to restamp them after replacement).
Casting No. CID Year Family Remarks
2120229 361 B Industrial
2205712 361 1958–66 B
2120229
2120429
361
361
B
B
Industrial 9F232295
2205712 361 1958–66 B
2658930 361 1965 B
2128854 361+383 1964 B Year Model
2468130 383 1959–71 B Vehicle Assembly Plant
2468130 383 1959–71 B Build Sequence Number
2532130 383 1965 B
2899830 383 1970 B
3614230 400 1971–72 B
3698630 400 1973–78 B 1968–74 Vehicle Assembly Plant Codes
4006530-400-12 400 1976–78 B A = Lynch Road, Detroit, MI F = Newark, DE
3614230 400 1971–72 B B = Dodge Main, Hamtramck, MI G = St. Louis, MO
3698630 400 1973–78 B C = Jefferson Avenue, MI H = New Stanton, PA (1970–71)
4006530-400 400 1976–78 B D = Belvidere, IL P = Export (1968)
E = Los Angeles, CA (1968–71) R = Windsor, Ontario
RB Big Blocks Engine Serial Number
Casting No. CID Year Family Remarks The serial number is a sequence of 14 digits that contains a wealth of information
2120329 383 1959–60 RB Golden Lion all in one location. A few problems must be answered first, such as where it is found
1852029 413 1962 RB Max Wedge and what it means. Occasionally, for whatever reason, an engine will not have a serial
2120529 413 1959–65 RB number stamped on it. This seems to be fairly common, so if yours doesn’t, it’s not
2205697 413 1959–65 RB Pass Car that big of a deal. On slant-6 engines the number is stamped on the block, below the
2468030 413 RB head near the ignition coil. Small blocks seem to have their own story—a sequence
1851629 413 1961 RB of numbers will almost always be present, but they don’t always follow this particular
1852029 413 1962 RB Med. Duty Truck serial number pattern. For small blocks, look on the front face of the block, below
MAX PERF the driver’s side cylinder head (see the small-block ID Boss explanation for more
1852029 413 1962–63 RB Med. Duty Truck information). For B and RB big blocks, the number is typically found along the oil pan
2120529 413 1959–65 RB rail, close to or under the starter. These are hand-stamped numbers, so visibility and
consistency are not always the greatest.
142
PM400E37320016 Secondary Codes
Here is a listing of the additional, or secondary, information codes and their
meanings. These are found on the ID boss or sequence number of your engine.
In the case of small blocks, some of these symbols might be found on the affected
Characters 1–2 Plant ID code. part (◊ on the tappet boss; anything crank related is on the No. 8 counterweight).
Characters 3–5 Cubic inch displacement Although this list is as complete as we can make it, there may be other codes
Character 6 Additional build information (mostly letters) or symbols not listed here. ID boss decoding is an ongoing project and new
Characters 7–10 10,000 day calendar date information is occasionally found.
Characters 11–14 Engine production number that cycle
T Truck
NOTE : There may be other characters after these, but they have not been R Regular Fuel
decoded and do not appear to be meaningful to restorers at this time. P Premium Fuel
LC Low Compression
Engine Stampings HC High Compression
The easiest way to determine what engine you’re looking at is by locating and decoding MP Maximum Performance
the stampings on the ID boss. This machined pad includes the displacement, build date, HP, HP2, High Performance
and other special information relating to that particular engine. The information on the X .001" Undersize Crank
pad is hand-stamped and may be difficult to read without cleaning the area. But, since X and X .010" Undersize Crank
this is the simplest way to identify various Chrysler engines, it’s worth the trouble. The ◊ .008" Oversize Tappets
location of the pad varies on small block, “B” and “RB” engines, and they’re listed below. O.S. .005" Oversized Valve Guides
X Oversize Valve Guides
S Special Engine (possibly warranty)
Small Block ID Boss SP Special Engine (TA340 or police)
Small Block: Locating the ID pad on a small block is the simple part—decoding the WT Water Tested
information is where it gets tricky. The pad is found on the driver’s side front of the H Hemi (before displacement: H426)
block below the cylinder head on both “A” and “LA” small blocks. With the engine A .020" Oversize Cylinder Bore
in the car and all the accessories in place, it may be hard to see, but it’s there. B .010" Undersize Main and Rod Bearings
E Cast Crank
H Standard 4-bbl V8
Example Engine I.D. Codes
Model Engine Build Date
Year Code Displacement (October 16, 1968)
EM 318 2637 0126

Assembly
Plant Code
4A 360 R 3630 Build-Sequence

Number
Model Secondary
Year Code Code
F 340 P 0018
10 16 Build Date
(October 16)
143
144
B/RB Big Block and Hemi ID Boss
Big Block: Locating the ID pad on big blocks is the easiest way to distinguish a “B”
engine from an “RB” engine. On “B” engines, the ID pad is located on the passenger’s
side of the engine, just below the cylinder head next to the distributor base; on “RB”
or Hemi engines, the ID pad is located on top of the block directly in front of the intake
manifold valley pan, next to the distributor base toward the driver’s side.
The first letter is the year code, followed by the engine’s displacement. Hemi
engines have an “H” after the year letter and before the displacement, while Cylinder Heads
truck blocks have a “T” in this location. Engine displacements before 1965 Head casting numbers can be found in two places on both big- and small-block
may have a digit missing. For example: 36=361, 38=383, 41=413. engines. The first is under the valve cover, where you’ll find a complete number as
well as other casting information like the date and clock. These numbers may be
covered in hardened, burned oil (a.k.a. “coke”), which may make them hard to read.
The head must be off the engine to find the second position, which is located on the
EH426 combustion chamber side of the head on the runners.
Casting No. CID Year Remarks

1 - 16 - 06 2206324
2206924
361, 383, 413
361, 383, 413
61–62
62
AP
2402557 413 63
2206035 170, 225 62–63
226341 318 62–67
2402286 413 62 Stage I
2406516 361, 383, 413 64–65
This line contains the build date and the number engine that 2406516 426 64–66 Street Wedge
2406516 413 65 300L
was built that day.
2406516 383 66–67
• The first number is the month (or a fourth digit, 10,000-day
2408520 413 64 300K
calendar date). 2406518 426 64 Stage III
• The second number is the day of the month (or a fourth digit, 2463209 426 63 Stage II
10,000-day calendar date). 2463200 361, 383, 413 63
• The third number is the build sequence for that day. 2206035 170, 225 64–66
This example engine was the sixth built. 2465315 273 64–65
2468016 426 HEMI 64 Cast K Head
2531110 426 HEMI 65 Aluminum “Alcoa”
2531695 426 HEMI 65 Rev B “Alcoa”
2531718 426 HEMI A148
The last line carries any secondary information pertaining to the build of
2531894 340 68–70 X
the engine. Any symbol or letter on this line had a special meaning. This 2532080 273 64–65
example engine has an A (oversize cylinder bores), P (premium fuel only) and 2536178 273 66 Early
◊ (oversize tappets). 2658234 273 66 Late
2658920 273-4 66
2780559 426 HEMI 66–71 Cast Iron
Model Year Codes 2780559 426 HEMI Cast Iron, Twin Plug
The following is a list of letter codes and their corresponding years. The year always 2406158 383-440 67 Non-HP
precedes the engine displacement. 2780915 383-440 67 1.6 Exh Valve = Non-HP
2780915 440 67 1.74 Exh Valve = HP
P= 1960 A= 1965 F = 1970 K or 4 = 1974 2658920 273-318 67
R= 1961 B= 1966 G = 1971 L or 5 = 1975 2658920 273 66
S= 1962 C= 1967 H = 1972 M or 6 = 1976 2843675 273 68–69
T= 1963 D= 1968 J = 1973 N or 7 = 1977 2843675 318 68–71
V= 1964 E= 1969 2843169 170-225 66–69
2843169 198, 225 70–71
2843169 198, 225 74
Assembly Plant Codes 2843906 383, 440 68–70
2945270 426 HEMI D3
K= Toluca
2951250 383, 440 68
M or PM = Mound Rd. 3418915 360 70–71 Z or O 1.88 Int Valve
MV or MN = Marysville 3418915 340 71 J or U 2.02 Int Valve
T or PT = Trenton 3418915 340 70 U or O 2.02 Int Valve
W= Windsor 3418915 340, 360 71–72 J 1.88 Int Valve
3462346 383, 400, 440 71–72
3462346 400, 440 73
3462598 340 70 AAR, TA
3512015X 426 HEMI D4 Cast Iron
3698995 198, 225 72
3614850 198, 225 72–73
2843675 318 72–74
3671587 360 73–74
3671587 340 73
3614433 426 HEMI Aluminum
3614476 B/RB Stage IV
3751213 400, 440 73 Motor Home
3769902 400, 440 74
145
146
Intake Manifold
Finding the intake manifold casting number is fairly simple. Usually, the casting
number is on top of the manifold, close to the carburetor mounting pad. Occasionally
it’s on the bottom of the manifold, which can pose an identification problem if it’s still
installed on the engine.
Cast No. Metal Year Body Engine Remarks

1733878 Alum 1956-57 C 303 2-4 Fury
1735917 Alum 1956-57 C 315 2-4 500 “A” Option
1822004 Inline 1957-58 C 318 2-4 WCFB 4BBLs
1851898 1959-60 C 383 1-4 RB-Engine
1851899 1959-60 C 383 1-2 RB-Engine
1859229 1957-61 C 318 1-4 WCFB 4BBL
2264877 Inline 1959-61 C 413 2-4 300 E-F-G
1827899 Inline 1958 C 350 2-4
1827899 Inline 1959-61 C 383 2-4 343 HP
Intake Manifold (cont.)
1947162 Alum 1961 C 383+413 2-4 Left
Cast No. Metal Year Body Engine Remarks
1947163 Alum 1961 C 383+413 2-4 Right
2531915 1968 A 340 1-4 HP
2129898 Alum 1960-62 A 170+225 1-4 Hyper Pak
2806301 1968 ABC 383 1-4
1859229 1962 B 318 1-4
2780543 w/Pentstar
2205968 1962 B 361 1-4
2780544 1968 B 426 2-4 Hemi/Inline
2205968 1962 B 383 1-4
2536900 Mag 1968 A 426 2-4 Hemi/Crossram
1827899 Inline 1962 B 383 2-4 343 HP
3531960 Parts 440 1-4
2206000 1962 B 413 1-4 D2, P2
2806178 1968 B/C 440 1-4
2206000 1962 C, D 413 1-4 C2,C3,Y1
2531915 1969 A 340 1-4 HP
2264877 Inline 1962 B 413 2-4 385 HP
2846704 340 1-4 Marine
2264877 Inline 1962 C 413 2-4 300-H
2806301 1969 ABC 383 1-4
2402726 Alum 1962 B 413 2-4 Max Perf I
2780543 w/Pentstar
2205968 1963 B 383 1-4
2780544 1967 B 426 2-4 Hemi/Inline
2206000 1963 C, D 413 1-4 Exc. 300-J
2806178 1969 ABC 440 1-4
2129985 Alum 1963 C 413 2-4 300J Right
3412046 Alum 1969 B 440 3-2 Edelbrock
2129987 Alum 1963 C 413 2-4 300J Left
3462848 1970 A, E 340 1-4
2402726 Alum 1963 B 426 2-4 Max Perf I
3418681 Alum 1970 E 370 3-2 Edelbrock
2402728 Alum 1963 B 426 2-4 Max Perf II
3418681 Alum PARTS 340 3-2 Edelbrock
2205968 1964 B 383 1-4
2951666 1970 BCE 383 1-4
2206000 1964 C, D 413 1-4
2780543 w/Pentstar
2129985 Alum 1964 C 413 2-4 300K Right
2780544 1970 BE 426 2-4 Hemi/Inline
2129987 Alum 1964 C 413 2-4 300K Left
2951736 1970 BCE 440 1-4
2402728 Alum 1964 B 426 2-4 Max Perf III
2946275 Iron 1970 BCE 440 3-2 Early
2406185 Alum-B 1964 B 426 1-4 Max 1-PL Short
2946276 Iron 1970 BCE 440 3-2 Late
2465165 Alum-B 1964 B 426 1-4 Max 2-PL Short
3412046 Alum 1970 BE 440 3-2 Edelbrock
2468045 Alum 1964 B 426 2-4 S/S Hemi Strip
3512100 1971 ABE 340 1-4
2206000 1964 B 426 1-4 Street Wedge
3549885 Alum PARTS 340 1-4 Edelbrock
2468043 Holley 1964 B 426 1-4 Hemi NAS-Track
2951666 1971 BCE 383 1-4
2465726 1965 A 273 1-4
2780543 w/Pentstar
2205968 1965 B, C 383 1-4
2780544 1971 BE 426 2-4 Hemi/Inline
2206000 1965 C, D 413 1-4
3512501 1971 BC 440 1-4 Exc. Imperial
2536900 Mag 1965 B 426 2-4 S/S Hemi Strip
1971 C 440 1-4 Imperial
2206000 1965 B, C 426 1-4 Street Wedge
2946276 Iron 1971 BCE 440 3-2
2531631 Rat Roadster B 426 1-4 Hemi/Holley
3614025 1972 ABE 340 1-4 Less N95
2946278 Inline Inverted B 426 2-4 Hemi/Holley
3671918 1972 ABE 340 1-4 With N95
2536563 1966 A 273 1-4 HP
3614046 1972 BC 400 1-4 Less N95
2536636 1966 273 1-4 Marine
1972 BC 400 1-4 With N95
2536771 w/C.A.P. 1966 A 273 1-4 HP
3614014 1972 BC 440 1-4 Less N95
2205968 1966 B, C 383 1-4
1972 BC 440 1-4 With N95
2531921 Inline 1966 B 426 2-4 Hemi/Holley
1972 BC 440 1-4 Less N95
2780543 w/DPCD 1966
1972 BC 440 1-4 With N95
2780544 w/Hole 1966 B 426 2-4 Hemi/Carter
2946276 Iron 1972 B 440 3-2 Very Early
2206000 1966 C, D 440 1-4
3671918 w/EGR 1973 ABE 340 1-4
2536563 1967 A 273 1-4 HP
3671879 1973 BC 400 1-4
2536771 w/C.A.P. 1967 A 273 1-4 HP
3698444 1973 BC 440 1-4 Exc. Imperial
2846346 273 1-4 Marine
1973 C 440 1-4 Imperial
2205968 1967 ABC 383 1-4 HP
3698434 1974 ABE 360 1-4
2780543 w/DPCD Early
3694882 1974 BC 400 1-4
2780544 L/Hole 1967 B 426 2-4 Hemi/Carter
3751728 1974 BC 440 1-4
2780543
3690187 PARTS B 440 3-2 Edelbrock
2780544 Wall Cut 1967 B 426 2-4 S-Stock
2780543 w/Pentstar Late
2780544 1967 B 426 2-4 Hemi/Carter
2536900 1967 B 426 2-4 Hemi NASCAR
2806178 1967 B 440 1-4 HP
147
PART NUMBER INDEX
01828352 . . . . . . . . . . . . . . . .82 03587436 . . . . . . . . . . . . . . .119 P2579656 . . . . . . . . . . . . . . .123 P2879600 . . . . . . . . . . . . . . .117

02495531 . . . . . . . . . . . . . . . .84 03587440 . . . . . . . . . . . . . . .119 P2579657 . . . . . . . . . . . . . . .123 P2898886 . . . . . . . . . . . . . . .124
02823848 . . . . . . . . . . . . . . .120 03672656 . . . . . . . . . . . . . . .124 P2579658 . . . . . . . . . . . . . . .123 P2901812 . . . . . . . . . . . . . . .124
02823849 . . . . . . . . . . . . . . .120 03672933 . . . . . . . . . . . . . . .118 P2782966 . . . . . . . . . . . . . . .124 P2925322 . . . . . . . . . . . . . . . .82
02889803 . . . . . . . . . . . . . . .125 03695508 . . . . . . . . . . . . . . .119 P2785434 . . . . . . . . . . . . .26, 46 P2932675 . . . . . . . . . . . . . . . .80
02983067 . . . . . . . . . . . . . . .125 03747092 . . . . . . . . . . . . . . . .81 P2785518 . . . . . . . . . . . . . . .123 P2932820 . . . . . . . . . . . . . . . .88
02983649 . . . . . . . . . . . . . . . .82 03764166 . . . . . . . . . . . . . . . .82 P2785579 . . . . . . . . . . . . . . .124 P2944424 . . . . . . . . . . . . . . .120
02983778 . . . . . . . . . . . . . . . .82 04019122 . . . . . . . . . . . . . . . .98 P2785791 . . . . . . . . . . . . . . .124 P2946105 . . . . . . . . . . . . . . . .57
03404404 . . . . . . . . . . . . . . . .82 04049601 . . . . . . . . . . . . . . .125 P2786711 . . . . . . . . . . . . . . .124 P2946353 . . . . . . . . . . . . . . . .39
03418658 . . . . . . . . . . . . . . .125 04293102 . . . . . . . . . . . . . . . .82 P2801243 . . . . . . . . . . . . . . . .92 P2946393 . . . . . . . . . . . . . . . .74
03431074 . . . . . . . . . . . . . . .125 04343581 . . . . . . . . . .16, 36, 58 P2806077 . . . . . . . . . .19, 39, 61 P2949303 . . . . . . . . . . . . . . .125
03431154 . . . . . . . . . . . . . . .125 04897646AA . . . . . . . . . .88, 98 P2841886 . . . . . . . . . . . . . . .122 P2964116 . . . . . . . . . . . . . . .124
03431590 . . . . . . . . . . . . . . .125 77R06021 . . . . . . . . . .25, 45, 67 P2842756 . . . . . . . . . . . . . . .124 P2964635 . . . . . . . . . . . . . . .125
03454390 . . . . . . . . . . . . . . .119 P1737725 . . . . . . . . . . . . . . . .80 P2842757 . . . . . . . . . . . . . . .124 P2998042 . . . . . . . . . . . . . . .124
03454391 . . . . . . . . . . . . . . .119 P2206445 . . . . . . . . . . . . .25, 45 P2842758 . . . . . . . . . . . . . . .124 P2998065 . . . . . . . . . . . . . . .125
03462185 . . . . . . . . . .26, 46, 68 P2444641 . . . . . . . . . . . . . . . .82 P2842873 . . . . . . . . . . . . . . .124 P2998326 . . . . . . . . . . . . .26, 46
03467764 . . . . . . . . . . . . . . . .98 P2579655 . . . . . . . . . . . . . . .123 P2843177 . . . . . . . . . . . . .34, 55 P2998547 . . . . . . . . . . . . . . .124
148
PART NUMBER INDEX
P2998749 . . . . . . . . . . . . . . .125 P3614321 . . . . . . . . . . . . . . . .55 P4007039AB. . . . . . . . . . . . . .75 P4120505 . . . . . . . . . . . . . . . .81

P2998796 . . . . . . . . . . . . . . .123 P3614542 . . . . . . . . . . . . . . . .61 P4007040 . . . . . . . . . . . . . . . .75 P4120534 . . . . . . . . . . . . . . . .81
P2998798 . . . . . . . . . . . . . . .123 P3672656 . . . . . . . . . . . . . . .124 P4007178 . . . . . . . . . . . . .39, 61 P4120589 . . . . . . . . . . . . . . . .62
P2998800 . . . . . . . . . . . . . . .121 P3680160 . . . . . . . . . . . . . . .123 P4007536 . . . . . . . . . .19, 39, 61 P4120600 . . . . . . . . . . . . . . . .81
P2998801 . . . . . . . . . . . . . . .121 P3680304 . . . . . . . . . . . . . . .123 P4007572 . . . . . . . . . . . . . . . .65 P4120610 . . . . . . . . . . . . . . .120
P2998802 . . . . . . . . . . . . . . .122 P3690152 . . . . . . . . . . . . . . . .81 P4007573 . . . . . . . . . . . . . . . .65 P4120611 . . . . . . . . . . . . . . .109
P2998804 . . . . . . . . . . . . . . .122 P3690175 . . . . . . . . . . . . . . . .31 P4007612 . . . . . . . . . . . . . . .110 P4120612 . . . . . . . . . . . . . . .109
P2998896 . . . . . . . . . . . . . . .122 P3690275 . . . . . . . . . . . . . . . .80 P4007667 . . . . . . . . . . . . . . . .83 P4120613 . . . . . . . . . .23, 43, 65
P3151736 . . . . . . . . . . . . . . . .82 P3690426 . . . . . . . . . . . . . . . .81 P4007886AB. . . . . . . . . . . . . .92 P4120618 . . . . . . . . . . . . .39, 60
P3412049 . . . . . . . . . . . . .23, 43 P3690427 . . . . . . . . . . . . . . . .81 P4007899 . . . . . . . . . . . . . . . .88 P4120619 . . . . . . . . . . . . . . . .60
P3412064 . . . . . . . . . . . . .24, 44 P3690428 . . . . . . . . . . . . . . . .81 P4007985 . . . . . . . . . . . . . . . .81 P4120620 . . . . . . . . . . . . . . . .60
P3412083 . . . . . . . . . . . . . . . .11 P3690430 . . . . . . . . . . . . . . . .80 P4022410 . . . . . . . . . . . . . . .124 P4120625 . . . . . . . . . . . . . . .120
P3412423 . . . . . . . . . . . . . . .122 P3690431 . . . . . . . . . . . . . . . .80 P4022411 . . . . . . . . . . . . . . .124 P4120626 . . . . . . . . . .18, 38, 60
P3412427 . . . . . . . . . . . . . . .122 P3690432 . . . . . . . . . . . . . . . .80 P4120074 . . . . . . . . . . . . . . .108 P4120634 . . . . . . . . . . . . . . . .18
P3416002 . . . . . . . . . . . . . . .116 P3690560 . . . . . . . . . . . . . . . .84 P4120086 . . . . . . . . . . . . . . . .22 P4120635 . . . . . . . . . .18, 38, 60
P3443159 . . . . . . . . . . . . . . .123 P3690715 . . . . . . . . . . . . . . . .66 P4120093 . . . . . . . . . . . . . . . .56 P4120659 . . . . . . . . . . . . . . . .33
P3443247 . . . . . . . . . . . . . . .121 P3690730AB. . . . . . . . . . . . . .92 P4120094 . . . . . . . . . . . . . . . .56 P4120692 . . . . . . . . . . . . . . . .51
P3443516 . . . . . . . . . . . . . . .122 P3690731 . . . . . . . . . . . . . . . .84 P4120096 . . . . . . . . . . . . . . . .51 P4120751 . . . . . . . . . .26, 46, 68
P3443627 . . . . . . . . . . . . . . .121 P3690732 . . . . . . . . . . . . . . . .84 P4120097 . . . . . . . . . . . . . . . .51 P4120752 . . . . . . . . . . . . .46, 68
P3444927 . . . . . . . . . . . . . . .124 P3690753 . . . . . . . . . . . . . . .104 P4120101 . . . . . . . . . . . . . . . .37 P4120753 . . . . . . . . . . . . .46, 68
P3444938 . . . . . . . . . . . . . . .122 P3690754 . . . . . . . . . . . . . . .104 P4120161AB. . . . . . . . . . . . . .92 P4120758 . . . . . . . . . .26, 46, 68
P3445223 . . . . . . . . . . . . . . .124 P3690755 . . . . . . . . . . . . . . .104 P4120162AB. . . . . . . . . . . . . .92 P4120785 . . . . . . . . . .20, 39, 61
P3446861 . . . . . . . . . . . . . . .125 P3690773 . . . . . . . . . . . . . . .102 P4120241 . . . . . . . . . . . . .50, 90 P4120808 . . . . . . . . . . . . . . . .83
P3461043 . . . . . . . . . . . . . . .120 P3690774 . . . . . . . . . . . . . . .103 P4120247 . . . . . . . . . . . . . . . .15 P4120886 . . . . . . . . . . . . . . . .80
P3461066 . . . . . . . . . . . . . . .120 P3690850 . . . . . . . . . . . . . . . .31 P4120249 . . . . . . . . . . . . . . . .61 P4120974 . . . . . . . . . . . . . . . .40
P3461222 . . . . . . . . . . . . . . .120 P3690855 . . . . . . . . . . . . . . . .89 P4120272 . . . . . . . . . . . . .37, 58 P4120998 . . . . . . . . . . . . .23, 44
P3461458 . . . . . . . . . . . . . . .120 P3690866 . . . . . . . . . . . . . . . .53 P4120280 . . . . . . . . . . . . . . . .89 P4271961 . . . . . . . . . . . . .11, 30
P3462491 . . . . . . . . . . . . . . .122 P3690874 . . . . . . . . . . . . . . . .66 P4120294 . . . . . . . . . . . . . . . .83 P4286500 . . . . . . . . . . . . . . . .55
P3462492 . . . . . . . . . . . . . . .122 P3690875 . . . . . . . . . . . . .24, 44 P4120353 . . . . . . . . . . . . . . . .17 P4286569 . . . . . . . . . . . . . . . .64
P3467766 . . . . . . . . . . . . . . . .98 P3690876 . . . . . . . . . . . . .24, 44 P4120383 . . . . . . . . . . . . . . . .98 P4286571 . . . . . . . . . . . . .23, 43
P3504289 . . . . . . . . . . . . . . .123 P3690933 . . . . . . . . . .19, 39, 61 P4120446 . . . . . . . . . . . . . . . .59 P4286589 . . . . . . . . . . . . . . . .66
P3504807 . . . . . . . . . . . . . . .122 P3690936 . . . . . . . . . . . . . . . .34 P4120456 . . . . . . . . . .16, 36, 57 P4286590 . . . . . . . . . . . . .23, 44
P3505419 . . . . . . . . . . . . . . .123 P3690939 . . . . . . . . . . . . . . . .66 P4120459 . . . . . . . . . .16, 36, 57 P4286612 . . . . . . . . . . . . .39, 60
P3505490 . . . . . . . . . . . . . . .124 P3690944 . . . . . . . . . . . . . . . .66 P4120461 . . . . . . . . . . . . . . . .89 P4286728 . . . . . . . . . . . . . . . .84
P3505491 . . . . . . . . . . . . . . .124 P3690963 . . . . . . . . . . . . . . . .60 P4120464 . . . . . . . . . . . . . . . .90 P4286754 . . . . . . . . . . . . . . . .36
P3571071 . . . . . . . . . . . . .24, 44 P3691468 . . . . . . . . . . . . . . .121 P4120465 . . . . . . . . . . . . . . . .90 P4286759 . . . . . . . . . .26, 46, 68
P3573632 . . . . . . . . . . . . . . .121 P3691667 . . . . . . . . . . . . . . .124 P4120468 . . . . . . . . . . . . . . .103 P4286775 . . . . . . . . . .20, 39, 61
P3574059 . . . . . . . . . . . . . . .121 P3760214 . . . . . . . . . . . . . . .119 P4120469 . . . . . . . . . . . . . . .103 P4286800 . . . . . . . . . .24, 45, 67
P3577086 . . . . . . . . . . . . . . . .62 P3760215 . . . . . . . . . . . . . . .119 P4120471 . . . . . . . . . . . . . . . .56 P4286812 . . . . . . . . . .19, 39, 61
P3580466 . . . . . . . . . . . . . . .120 P3830183 . . . . . . . . . . . . .12, 32 P4120472 . . . . . . . . . . . . . . . .36 P4286813 . . . . . . . . . . . . . . . .61
P3612874 . . . . . . . . . . . . . . .121 P4006767 . . . . . . . . . . . . . . . .34 P4120484 . . . . . . . . . . . . . . . .75 P4286825 . . . . . . . . . . . . . . . .42
P3613278 . . . . . . . . . . . . . . .121 P4007038 . . . . . . . . . . . . . . . .75 P4120492 . . . . . . . . . . . . .38, 60 P4286826 . . . . . . . . . . . . . . . .42
149
PART NUMBER INDEX
P4286900 . . . . . . . . . . . . .25, 45 P4452795 . . . . . . . . . . . . .13, 33 P4510644 . . . . . . . . . . . . . . .108 P4510798 . . . . . . . . . . . . . . .130

P4343581 . . . . . . . . . . . . . . . .16 P4452801 . . . . . . . . . . . . . . . .40 P4510646 . . . . . . . . . . . . . . . .72 P4510799 . . . . . . . . . . . . . . .130
P4349116 . . . . . . . . . . . . . . .110 P4452812 . . . . . . . . . . . . .24, 44 P4510655 . . . . . . . . . . . . . . .102 P4510800 . . . . . . . . . . . . . . .130
P4349216 . . . . . . . . . .26, 46, 68 P4452815 . . . . . . . . . . . . .13, 32 P4510656 . . . . . . . . . . . . . . .102 P4510801 . . . . . . . . . . . . . . .130
P4349217 . . . . . . . . . . . . .46, 68 P4452816 . . . . . . . . . . . . . . . .52 P4510657 . . . . . . . . . . . . . . .102 P4510802 . . . . . . . . . . . . . . .130
P4349218 . . . . . . . . . . . . .46, 68 P4452827 . . . . . . . . . . . . . . . .20 P4510761AB. . . . . . . . . . . . .130 P4510803 . . . . . . . . . . . . . . .130
P4349228 . . . . . . . . . . . . . . . .72 P4452890 . . . . . . . . . .24, 44, 66 P4510762AB. . . . . . . . . . . . .130 P4510805 . . . . . . . . . . . . . .130
P4349235 . . . . . . . . . . . . . . . .73 P4452982 . . . . . . . . . . . . . . .108 P4510763 . . . . . . . . . . . . . . .130 P4510806 . . . . . . . . . . . . . . .130
P4349236 . . . . . . . . . . . . . . . .73 P4452983 . . . . . . . . . . . . . . .108 P4510764 . . . . . . . . . . . . . . .130 P4510807 . . . . . . . . . . . . . . .130
P4349237 . . . . . . . . . . . . . . . .73 P4452984 . . . . . . . . . . . . . . .108 P4510765 . . . . . . . . . . . . . . .130 P4510808 . . . . . . . . . . . . . . .130
P4349238 . . . . . . . . . . . . . . . .73 P4452985 . . . . . . . . . . . . . . .108 P4510766 . . . . . . . . . . . . . . .130 P4510948 . . . . . . . . . . . . . . . .97
P4349239 . . . . . . . . . . . . . . . .73 P4452986 . . . . . . . . . . . . . . .108 P4510767 . . . . . . . . . . . . . . .130 P4529002 . . . . . . . . . . . . . . . .76
P4349241 . . . . . . . . . . . . . . . .73 P4452987 . . . . . . . . . . . . . . .108 P4510768 . . . . . . . . . . . . . . .130 P4529008 . . . . . . . . . . . . . . . .92
P4349278 . . . . . . . . . . . . . . . .80 P4510268 . . . . . . . . . . . . . . .108 P4510769 . . . . . . . . . . . . . . .130 P4529009 . . . . . . . . . . . . . . . .92
P4349279 . . . . . . . . . . . . . . . .80 P4510269 . . . . . . . . . . . . . . .108 P4510770 . . . . . . . . . . . . . . .130 P4529012 . . . . . . . . . . . . . . . .92
P4349304 . . . . . . . . . . . . . . . .73 P4510281 . . . . . . . . . . . . . . . .11 P4510771 . . . . . . . . . . . . . . .130 P4529016 . . . . . . . . . . . . . . . .92
P4349321 . . . . . . . . . . . . . . . .74 P4510282 . . . . . . . . . . . . . . . .11 P4510772 . . . . . . . . . . . . . . .130 P4529017 . . . . . . . . . . . . . . . .92
P4349469AB. . . . . . . . . . . . . .88 P4510283 . . . . . . . . . . . . . . . .11 P4510773 . . . . . . . . . . . . . . .130 P4529019 . . . . . . . . . . . . . . . .92
P4349557 . . . . . . . . . . . . . . . .56 P4510284 . . . . . . . . . . . . . . . .11 P4510774 . . . . . . . . . . . . . . .130 P4529020 . . . . . . . . . . . . . . . .92
P4349559 . . . . . . . . . . . . . . . .35 P4510285 . . . . . . . . . . . . . . . .11 P4510775 . . . . . . . . . . . . . . .130 P4529023AB. . . . . . . . . . . . . .92
P4349620 . . . . . . . . . . . . . . . .37 P4510286 . . . . . . . . . . . . . . . .11 P4510776 . . . . . . . . . . . . . . .130 P4529025 . . . . . . . . . . . . . . . .76
P4349628 . . . . . . . . . . . . . . . .65 P4510287 . . . . . . . . . . . . . . . .11 P4510777 . . . . . . . . . . . . . . .130 P4529038 . . . . . . . . . . . . . . . .18
P4349629 . . . . . . . . . . . . . . . .43 P4510288 . . . . . . . . . . . . . . . .11 P4510778 . . . . . . . . . . . . . . .130 P4529054 . . . . . . . . . . . . . . . .63
P4349816 . . . . . . . . . . . . .13, 32 P4510289 . . . . . . . . . . . . . . . .11 P4510779 . . . . . . . . . . . . . . .130 P4529055 . . . . . . . . . . . . . . . .41
P4452025 . . . . . . . . . . . . . . . .68 P4510318 . . . . . . . . . . . . . . . .72 P4510780 . . . . . . . . . . . . . . .130 P4529056 . . . . . . . . . . . . . . . .41
P4452033 . . . . . . . . . . . . .39, 61 P4510319 . . . . . . . . . . . . . . . .72 P4510781 . . . . . . . . . . . . . . .130 P4529057AB. . . . . . . . . . . . . .75
P4452089 . . . . . . . . . . . . . . . .58 P4510577 . . . . . . . . . . . . . . . .17 P4510782 . . . . . . . . . . . . . . .130 P4529058 . . . . . . . . . . . . . . . .74
P4452091 . . . . . . . . . . . . .36, 37 P4510579 . . . . . . . . . . . . . . .120 P4510783 . . . . . . . . . . . . . . .130 P4529059 . . . . . . . . . . . . . . . .74
P4452093 . . . . . . . . . . . . . . . .65 P4510610 . . . . . . . . . . . . . . . .97 P4510784 . . . . . . . . . . . . . . .130 P4529060 . . . . . . . . . . . . . . . .74
P4452097 . . . . . . . . . . . . . . . .65 P4510611 . . . . . . . . . . . . . . . .97 P4510785 . . . . . . . . . . . . . . .130 P4529061 . . . . . . . . . . . . . . . .74
P4452099 . . . . . . . . . . . . .23, 43 P4510612 . . . . . . . . . . . . . . . .97 P4510786 . . . . . . . . . . . . . . .130 P4529064 . . . . . . . . . . . . . . . .98
P4452103 . . . . . . . . . . . . . . . .42 P4510614 . . . . . . . . . . . . . . . .97 P4510787 . . . . . . . . . . . . . . .130 P4529070AB. . . . . . . .13, 32, 53
P4452105 . . . . . . . . . . . . . . . .42 P4510633 . . . . . . . . . . . . . . . .21 P4510788 . . . . . . . . . . . . . . .130 P4529071 . . . . . . . . . . . . . . . .76
P4452112 . . . . . . . . . . . . . . . .31 P4510634 . . . . . . . . . . . . . . .111 P4510789 . . . . . . . . . . . . . . .130 P4529072 . . . . . . . . . . . . . . . .76
P4452113 . . . . . . . . . . . . . . . .31 P4510635 . . . . . . . . . . . . .22, 72 P4510790 . . . . . . . . . . . . . . .130 P4529073 . . . . . . . . . . . . . . . .76
P4452769 . . . . . . . . . . . . . . . .20 P4510636 . . . . . . . . . . . . . . . .62 P4510791 . . . . . . . . . . . . . . .130 P4529074 . . . . . . . . . . . . . . . .76
P4452778 . . . . . . . . . . . . .22, 72 P4510637 . . . . . . . . . . . . . . .110 P4510792 . . . . . . . . . . . . . . .130 P4529075 . . . . . . . . . . . . . . . .76
P4452779 . . . . . . . . . . . . .22, 72 P4510638 . . . . . . . . . . . . . . .102 P4510793 . . . . . . . . . . . . . . .130 P4529076 . . . . . . . . . . . . . . . .76
P4452782 . . . . . . . . . . . . . . . .54 P4510639 . . . . . . . . . . . . . . . .98 P4510794 . . . . . . . . . . . . . . .130 P4529077 . . . . . . . . . . . . . . . .76
P4452783 . . . . . . . . . . . . . . . .33 P4510640 . . . . . . . . . . . . . . .112 P4510795 . . . . . . . . . . . . . . .130 P4529078 . . . . . . . . . . . . . . . .76
P4452785 . . . . . . . . . . . . . . . .89 P4510642 . . . . . . . . . . . . . . .103 P4510796 . . . . . . . . . . . . . . .130 P4529079 . . . . . . . . . . . . . . . .76
P4452787 . . . . . . . . . . . . . . .104 P4510643 . . . . . . . . . . . . . . .108 P4510797 . . . . . . . . . . . . . . .130 P4529080 . . . . . . . . . . . . . . . .76
150
PART NUMBER INDEX
P4529081 . . . . . . . . . . . . . . . .76 P4529403AB. . . . . . . . . . . . . .90 P4529697 . . . . . . . . . . . . . . . .98 P4876071 . . . . . . . . . . . . . . . .16

P4529082 . . . . . . . . . . . . . . . .76 P4529405 . . . . . . . . . . . . . . .118 P4529698 . . . . . . . . . . . . . . . .98 P4876083 . . . . . . . . . . . . . . . .56
P4529083 . . . . . . . . . . . . . . . .76 P4529406 . . . . . . . . . . . . . . . .97 P4529700 . . . . . . . . . . . . . . .104 P4876097 . . . . . . . . . . . . . . .109
P4529084 . . . . . . . . . . . . . . . .76 P4529431 . . . . . . . . . . . . . . . .22 P4529702 . . . . . . . . . . . . . . .104 P4876118 . . . . . . . . . . . . . . .104
P4529085 . . . . . . . . . . . . . . . .76 P4529447 . . . . . . . . . . . . . . . .96 P4529705 . . . . . . . . . . . . . . . .21 P4876124 . . . . . . . . . . . . . . . .58
P4529086 . . . . . . . . . . . . . . .76 P4529448 . . . . . . . . . . . . . . . .96 P4529706 . . . . . . . . . . . . . . . .21 P4876188 . . . . . . . . . . . . . . . .21
P4529087 . . . . . . . . . . . . . . . .88 P4529449 . . . . . . . . . . . . . . . .96 P4529707 . . . . . . . . . . . . . . . .21 P4876196 . . . . . . . . . . . . . . .110
P4529088 . . . . . . . . . . . . . . . .88 P4529450 . . . . . . . . . . . . . . . .96 P4529708 . . . . . . . . . . . . . . . .21 P4876197 . . . . . . . . . . . . . . .110
P4529101 . . . . . . . . . . . . . . . .40 P4529451 . . . . . . . . . . . . . . . .96 P4529732 . . . . . . . . . . . . .11, 30 P4876206 . . . . . . . . . . . . . . .110
P4529110 . . . . . . . . . . . . . . . .50 P4529452 . . . . . . . . . . . . . . . .96 P4529738 . . . . . . . . . . . . . . . .62 P4876280 . . . . . . .13, 25, 33, 53
P4529111 . . . . . . . . . . . . . . . .74 P4529453 . . . . . . . . . . . . . . . .96 P4529740 . . . . . . . . . . . . . . . .62 P4876307 . . . . . . . . . .26, 46, 68
P4529112 . . . . . . . . . . . . . . . .73 P4529454 . . . . . . . . . . . . . . . .56 P4529742 . . . . . . . . . . . . . . . .62 P4876308 . . . . . . . . . . . . . . . .68
P4529113 . . . . . . . . . . . . . . . .96 P4529455 . . . . . . . . . . . . . . . .35 P4529743 . . . . . . . . . . . . . . . .40 P4876310 . . . . . . . . . . . . . . . .55
P4529117 . . . . . . . . . . . . . . . .41 P4529456 . . . . . . . . . . . . . . . .16 P4529744 . . . . . . . . . . . . . . . .41 P4876313 . . . . . . . . . . . . . . . .73
P4529118 . . . . . . . . . . . . . . . .41 P4529474 . . . . . . . . . . . . . . . .62 P4529748 . . . . . . . . . . . . . . . .74 P4876335 . . . . . . . . . . . . . . . .63
P4529136 . . . . . . . . . . . . . . . .97 P4529475 . . . . . . . . . . . . . . . .62 P4529751 . . . . . . . . . . . . . . . .88 P4876372 . . . . . . . . . . . . . . . .54
P4529137 . . . . . . . . . . . . . . . .97 P4529476 . . . . . . . . . . . . . . . .40 P4529752 . . . . . . . . . . . . . . . .88 P4876373 . . . . . . . . . . . . . . . .64
P4529138 . . . . . . . . . . . . . . . .97 P4529477 . . . . . . . . . . . . . . . .40 P4529790 . . . . . . . . . . . . . . . .66 P4876374 . . . . . . . . . . . . . . . .64
P4529139 . . . . . . . . . . . . . . . .97 P4529483AB. . . . . . . . . . . . .102 P4529791 . . . . . . . . . . . . . . . .80 P4876377 . . . . . . . . . . . . . . . .54
P4529140 . . . . . . . . . . . . . . . .97 P4529484 . . . . . . . . . . . . . . .103 P4529792 . . . . . . . . . . . . . . . .83 P4876391 . . . . . . . . . . . . . . . .34
P4529141 . . . . . . . . . . . . . . . .97 P4529485 . . . . . . . . . . . . . . .103 P4529794 . . . . . . . . . . . . . . . .84 P4876392 . . . . . . . . . . . . . . . .34
P4529142 . . . . . . . . . . . . . . . .96 P4529486 . . . . . . . . . . . . . . .104 P4529795 . . . . . . . . . . . . . . . .82 P4876397 . . . . . . . . . . . . . . . .60
P4529143 . . . . . . . . . . . . . . .96 P4529489 . . . . . . . . . . . . . . . .96 P4529797 . . . . . . . . . . . . . . . .83 P4876398 . . . . . . . . . . . . . . . .38
P4529183 . . . . . . . . . . . . . . .110 P4529534 . . . . . . . . . . . . . . . .22 P4529805 . . . . . . . . . .24, 44, 67 P4876414 . . . . . . . . . . . . . . . .76
P4529184 . . . . . . . . . . . . . . .110 P4529545 . . . . . . . . . . . . . . .34 P4529838 . . . . . . . . . . . . . . . .55 P4876415 . . . . . . . . . . . . . . . .76
P4529185 . . . . . . . . . . . . . . . .74 P4529546 . . . . . . . . . . . . . . . .34 P4529876 . . . . . . . . . . . . . . .120 P4876416 . . . . . . . . . . . . . . .76
P4529187 . . . . . . . . . .24, 44, 67 P4529547 . . . . . . . . . . . . . . . .15 P4529880 . . . . . . . . . . . . .38, 59 P4876417 . . . . . . . . . . . . . . . .76
P4529190 . . . . . . . . . .24, 44, 66 P4529548 . . . . . . . . . . . . . . .15 P4529881 . . . . . . . . . . . . .38, 59 P4876445 . . . . . . . . . . . . . . .103
P4529199 . . . . . . . . . . . . . . . .37 P4529557 . . . . . . . . . . . . . . . .34 P4529882 . . . . . . . . . . . . .38, 59 P4876448 . . . . . . . . . . . . . . .76
P4529220AB. . . . . . . . . . . . . .56 P4529559 . . . . . . . . . . . . . . . .34 P4529884 . . . . . . . . . . . . . . . .23 P4876518 . . . . . . . . . . . . . . .108
P4529256 . . . . . . . . . . . . .54, 68 P4529560 . . . . . . . . . . . . . . . .34 P4529895 . . . . . . . . . . . . . . . .17 P4876519 . . . . . . . . . . . . . . .108
P4529264 . . . . . . . . . . . . . . . .74 P4529561 . . . . . . . . . . . . . . . .15 P4529896 . . . . . . . . . . . . . . . .17 P4876559 . . . . . . . . . . . . . . . .53
P4529270 . . . . . . . . . . . . . . . .33 P4529563 . . . . . . . . . . . . . . . .65 P4529897 . . . . . . . . . . . . . . . .17 P4876560 . . . . . . . . . . . . . . . .53
P4529272AB. . . . . . . . . . . . .103 P4529564 . . . . . . . . . . . . . . . .43 P4529898 . . . . . . . . . . . . . . . .15 P4876631 . . . . . . . . . . . . . . . .54
P4529273 . . . . . . . . . . . . . . .104 P4529565 . . . . . . . . . . . . . . . .43 P4529965AB. . . . . . . . . . . . . .75 P4876676 . . . . . . . . . . . . . . . .59
P4529288 . . . . . . . . . . . . . . . .20 P4529566 . . . . . . . . . . . . . . . .23 P4529978 . . . . . . . . . . . . . . . .16 P4876700 . . . . . . . . . . . . . . . .53
P4529315 . . . . . . . . . . . . . . . .14 P4529567 . . . . . . . . . . . . . . . .23 P4529993 . . . . . . . . . . . . . . . .35 P4876701 . . . . . . . . . . . . . . . .53
P4529316 . . . . . . . . . . . . . . . .14 P4529591 . . . . . . . . . . . . . . . .90 P4532033 . . . . . . . . . . . . . . . .75 P4876707 . . . . . . . . . . . . . . . .54
P4529330 . . . . . . . . . . . . . . . .22 P4529592 . . . . . . . . . . . . . . . .90 P4876047 . . . . . . . . . . . . . . . .96 P4876709 . . . . . . . . . . . . . . . .18
P4529336 . . . . . . . . . . . . . . . .15 P4529694 . . . . . . . . . . . . . . . .98 P4876050 . . . . . . . . . . . . . . . .55 P4876710 . . . . . . . . . . . . . . . .18
P4529338 . . . . . . . . . . . . . . . .17 P4529695 . . . . . . . . . . . . . . . .98 P4876064 . . . . . . . . . .19, 39, 61 P4876732 . . . . . . . . . . . . . . . .84
P4529339 . . . . . . . . . . . . . . . .17 P4529696 . . . . . . . . . . . . . . . .98 P4876070 . . . . . . . . . . . . . . . .35 P4876733 . . . . . . . . . . . . . . . .84
151
PART NUMBER INDEX
P4876757 . . . . . . . . . . . . . . . .56 P5007256 . . . . . . . . . . . . . . . .52 P5007615 . . . . . . . . . . . . . . . .36 P5153389 . . . . . . . . . . . . . . .117

P4876759 . . . . . . . . . . . . . . . .56 P5007257 . . . . . . . . . . . . . . . .52 P5007616 . . . . . . . . . . . . . . . .37 P5153390 . . . . . . . . . . . . . . .117
P4876769 . . . . . . . . . .13, 25, 33 P5007258 . . . . . . . . . . . . . . . .52 P5007620 . . . . . . . . . . . . . . . .59 P5153391 . . . . . . . . . . . . . . .117
P4876770 . . . . . . . . . . . . . . . .42 P5007259 . . . . . . . . . . . . . . . .52 P5007621 . . . . . . . . . . . . .25, 45 P5153392 . . . . . . . . . . . . . . .117
P4876771 . . . . . . . . . . . . . . . .64 P5007290AB. . . . . . . . . . . . . .90 P5007631 . . . . . . . . . . . . . . . .65 P5153393 . . . . . . . . . . . . . . .116
P4876775 . . . . . . . . . . . . . . . .83 P5007297AB. . . . . . . . . . . . . .90 P5007643AB. . . . . . . . . . .25, 45 P5153394 . . . . . . . . . . . . . . .116
P4876804 . . . . . . . . . . . . . . .102 P5007301 . . . . . . . . . . . . .50, 52 P5007667AB. . . . . . . . . . . . . .10 P5153395 . . . . . . . . . . . . . . .116
P4876805AB. . . . . . . . . . . . . .90 P5007326 . . . . . . . . . . . . . . .104 P5007668AB. . . . . . . . . . . . . .10 P5153396 . . . . . . . . . . . . . . .116
P4876820 . . . . . . . . . . . . . . . .90 P5007330 . . . . . . . . . . . . . . . .41 P5007671AB. . . . . . . . . . . . . .30 P5153397 . . . . . . . . . . . . . . .116
P4876821 . . . . . . . . . . . . . . . .88 P5007334 . . . . . . . . . . . . . . . .22 P5007691AB. . . . . . . . . . . . .129 P5153398 . . . . . . . . . . . . . . .116
P4876826 . . . . . . . . . . . . . . .128 P5007345 . . . . . . . . . . . . .23, 44 P5007709 . . . . . . . . . . . . . . . .53 P5153399 . . . . . . . . . . . . . . .116
P4876847 . . . . . . . . . . . . . . . .43 P5007361 . . . . . . . . . . . . . . . .54 P5007733 . . . . . . . . . .26, 46, 68 P5153400 . . . . . . . . . . . . . . .116
P4876848 . . . . . . . . . . . . . . . .43 P5007378 . . . . . . . . . . . . . . . .88 P5007737AB. . . . . . . . . . . . . .75 P5153401 . . . . . . . . . . . . . . .118
P4876850 . . . . . . . . . . . . . . . .73 P5007381 . . . . . . . . . . . . . . . .63 P5007747 . . . . . . . . . . . . . . . .88 P5153402 . . . . . . . . . . . . . . .118
P4876855 . . . . . . . . . . . . . . . .15 P5007409 . . . . . . . . . . . . . . .102 P5007793AB. . . . . . . . . . . . . .92 P5153403 . . . . . . . . . . . . . . .116
P4876857 . . . . . . . . . . . . . . . .15 P5007410 . . . . . . . . . . . . . . .102 P5007794AB. . . . . . . . . . . . . .92 P5153404 . . . . . . . . . . . . . . .116
P4876870AB. . . . . . . . . . . . . .90 P5007411 . . . . . . . . . . . . . . .102 P5007796 . . . . . . . . . . . . . . . .16 P5153405 . . . . . . . . . . . . . . .117
P4876876AB. . . . . . . . . . . . . .90 P5007417AC. . . . . . . . . . . . .102 P5007801 . . . . . . . . . . . . .14, 34 P5153406 . . . . . . . . . . . . . . .117
P4876877AB. . . . . . . . . . . . . .90 P5007418 . . . . . . . . . . . . . . .102 P5007807AB. . . . . . . . . . . . . .43 P5153407 . . . . . . . . . . . . . . .117
P4876878AB. . . . . . . . . . . . . .90 P5007419 . . . . . . . . . . . . .37, 58 P5007809 . . . . . . . . . . . . .22, 72 P5153408 . . . . . . . . . . . . . . .119
P4876879AB. . . . . . . . . . . . . .90 P5007444AB. . . . . . . . . . .21, 62 P5007815AB. . . . . . . . . . . . . .30 P5153409 . . . . . . . . . . . . . . .119
P4876886 . . . . . . . . . . . . . . .102 P5007446 . . . . . . . . . . . . . . . .58 P5007817 . . . . . . . . . . . . . . . .43 P5153410 . . . . . . . . . . . . . . .119
P4876915 . . . . . . . . . . . . . . . .90 P5007448 . . . . . . . . . . . . . . . .37 P5007818 . . . . . . . . . . . . .23, 43 P5153411 . . . . . . . . . . . . . . .118
P4876916 . . . . . . . . . . . . . . . .90 P5007449 . . . . . . . . . . . . .25, 45 P5007840 . . . . . . . . . . . . . . . .50 P5153412 . . . . . . . . . . . . . . .118
P4876919 . . . . . . . . . . . . . . . .97 P5007458 . . . . . . . . . . . . .38, 59 P5007848 . . . . . . . . . . . . . . . .43 P5153413 . . . . . . . . . . . . . . .118
P4876920 . . . . . . . . . . . . . . . .97 P5007461AB. . . . . . . . . . . . .129 P5007856 . . . . . . . . . . . . . . . .80 P5153414 . . . . . . . . . . . . . . .118
P4876926 . . . . . . . . . . . . . . . .83 P5007477 . . . . . . . . . . . . . . . .55 P5007857 . . . . . . . . . . . . . . .108 P5153415 . . . . . . . . . . . . . . .117
P4876927 . . . . . . . . . . . . . . . .83 P5007481 . . . . . . . . . . . . . . . .83 P5007860 . . . . . . . . . . . . . . . .84 P5153416 . . . . . . . . . . . . . . .119
P4876947AB. . . . . . . . . . . . . .90 P5007494 . . . . . . . . . . . . . . . .35 P5007869 . . . . . . . . . . . . . . . .72 P5153417 . . . . . . . . . . . . . . .119
P5007051 . . . . . . . . . . . . . . . .97 P5007499 . . . . . . . . . . . . . . . .17 P5007912 . . . . . . . . . . . . . . . .56 P5153423 . . . . . . . . . . . . . . .116
P5007052 . . . . . . . . . . . . .37, 59 P5007515 . . . . . . . . . . . . . . . .67 P5007919AB. . . . . . . . . . . . .129 P5153424 . . . . . . . . . . . . . . .116
P5007053 . . . . . . . . . . . . .38, 59 P5007516AB. . . . . . . . . . . . .129 P5007920AB. . . . . . . . . . . . .129 P5153425 . . . . . . . . . . . . . . .118
P5007087 . . . . . . . . . . . . . . .110 P5007517AB. . . . . . . . . . . . .128 P5007921 . . . . . . . . . . . . .38, 59 P5153426 . . . . . . . . . . . . . . .118
P5007088 . . . . . . . . . . . . . . .110 P5007521 . . . . . . . . . . . . . . .128 P5007950 . . . . . . . . . . . . . . . .55 P5153427 . . . . . . . . . . . . . . .119
P5007145 . . . . . . . . . . . . . . . .55 P5007534 . . . . . . . . . . . . . . . .21 P5153381 . . . . . . . . . . . . . . .126 P5153428 . . . . . . . . . . . . . . .119
P5007171 . . . . . . . . . . . . . . . .89 P5007546 . . . . . . . . . . . . . . . .75 P5153382 . . . . . . . . . . . . . . .126 P5153433 . . . . . . . . . . . . . . .116
P5007172 . . . . . . . . . . . . . . . .89 P5007552 . . . . . . . . . . . . . . . .50 P5153383 . . . . . . . . . . . . . . .126 P5153434 . . . . . . . . . . . . . . .116
P5007239 . . . . . . . . . . . . . . .103 P5007568 . . . . . . . . . . . . . . . .89 P5153384 . . . . . . . . . . . . . . .119 P5153435 . . . . . . . . . . . . . . .118
P5007250 . . . . . . . . . . . . . . . .31 P5007569 . . . . . . . . . . . . . . . .89 P5153385 . . . . . . . . . . . . . . .126 P5153436 . . . . . . . . . . . . . . .118
P5007251 . . . . . . . . . . . . .12, 31 P5007612 . . . . . . . . . . . . . . . .58 P5153386 . . . . . . . . . . . . . . .119 P5153532 . . . . . . . . . . . . . . . .55
P5007253 . . . . . . . . . . . . . . . .52 P5007613 . . . . . . . . . . . . . . . .58 P5153387 . . . . . . . . . . . . . . .119 P5153533 . . . . . . . . . . . . . . . .55
P5007255 . . . . . . . . . . . . . . . .52 P5007614 . . . . . . . . . . . . . . . .36 P5153388 . . . . . . . . . . . . . . .117 P5153534 . . . . . . . . . . . . . . . .55
152
PART NUMBER INDEX
P5153535 . . . . . . . . . . . . . . . .55 P5249202 . . . . . . . . . . . . . . . .38 P5249631 . . . . . . . . . . . . . . . .20 P5249717 . . . . . . . . . . . . . . .111

P5153536 . . . . . . . . . . . . . . . .55 P5249203 . . . . . . . . . . . . . . . .18 P5249632 . . . . . . . . . . . . . . . .20 P5249718 . . . . . . . . . . . . . . . .83
P5153567 . . . . . . . . . . . . . . . .41 P5249204 . . . . . . . . . . . . . . . .18 P5249633 . . . . . . . . . . . . .20, 40 P5249719 . . . . . . . . . . . . . . .104
P5153575 . . . . . . . . . . . . . . .119 P5249226 . . . . . . . . . . . . . . .110 P5249636 . . . . . . . . . .13, 32, 53 P5249807 . . . . . . . . . . . . . . . .76
P5153737 . . . . . . . . . . . . . . . .21 P5249229 . . . . . . . . . . . . . . .110 P5249637 . . . . . . . . . . . . . . .54 P5249817 . . . . . . . . . . . . . . . .43
P5206436 . . . . . . . . . . . . . . . .82 P5249259 . . . . . . . . . . . . .11, 30 P5249639 . . . . . . . . . . . . .42, 64 P5249818 . . . . . . . . . . . . .23, 43
P5249059 . . . . . . . . . . . . . . . .65 P5249261 . . . . . . . . . . . . . . . .51 P5249643 . . . . . . . . . . . . . . . .42 P5249822 . . . . . . . . . .12, 31, 52
P5249060 . . . . . . . . . . . . . . . .65 P5249267 . . . . . . . . . . . . . . . .53 P5249644AB. . . . . . . . . . . . . .84 P5249824 . . . . . . . . . . . . . . . .35
P5249061 . . . . . . . . . . . . . . . .65 P5249268 . . . . . . . . . . . . . . . .32 P5249646AB. . . . . . . . . . . . .128 P5249847 . . . . . . . . . . . . . . . .61
P5249062 . . . . . . . . . . . . . . . .65 P5249269 . . . . . . . . . . . . .13, 32 P5249647AB. . . . . . . . . . . . .128 P5249848 . . . . . . . . . .19, 39, 61
P5249064 . . . . . . . . . . . . . . . .43 P5249315 . . . . . . . . . . . . . . .111 P5249648AB. . . . . . . . . . . . .128 P5249849 . . . . . . . . . .19, 39, 61
P5249088 . . . . . . . . . . . . . . .112 P5249316AB. . . . . . . . . . . . .112 P5249649AB. . . . . . . . . . . . .129 P5249866 . . . . . . . . . . . . . . . .38
P5249092 . . . . . . . . . . . . . . . .40 P5249320 . . . . . . . . . . . . . . . .67 P5249650AB. . . . . . . . . . . . .129 P5249898 . . . . . . . . . . . . . . . .14
P5249131 . . . . . . . . . . . . . . . .53 P5249321AB. . . . . . . . . . . . . .92 P5249652AB. . . . . . . . . . . . .129 P5249926 . . . . . . . . . . . . .22, 42
P5249148 . . . . . . . . . . . . . . .109 P5249444 . . . . . . . . . . . . . . .104 P5249656AB. . . . . . . . . . . . .128 P5249947 . . . . . . . . . . . . . . . .17
P5249149 . . . . . . . . . . . . . . .109 P5249492 . . . . . . . . . . . . . . . .42 P5249661 . . . . . . . . . . . . . . . .18 P5249949 . . . . . . . . . . . . . . . .17
P5249150 . . . . . . . . . . . . . . .109 P5249493 . . . . . . . . . . . . . . . .42 P5249667AC. . . . . . . . . . . . . .10 P6030269 . . . . . . . . . . . . .14, 34
P5249151 . . . . . . . . . . . . . . .109 P5249505 . . . . . . . . . . . . . . . .20 P5249672 . . . . . . . . . . . . . . . .38
P5249157 . . . . . . . . . . . . . . .109 P5249557AB. . . . . . . .12, 31, 52 P5249690 . . . . . . . . . . . . . . . .52
P5249158 . . . . . . . . . . . . . . .109 P5249558 . . . . . . . . . . . . . . . .67 P5249694 . . . . . . . . . . . . . . . .32
P5249162 . . . . . . . . . . . . . . .109 P5249559 . . . . . . . . . . . . . . . .67 P5249699 . . . . . . . . . . . . . . . .12
P5249163 . . . . . . . . . . . . . . .104 P5249562 . . . . . . . . . . . . .12, 31 P5249706 . . . . . . . . . . . . . . . .51
P5249185 . . . . . . . . . . . . . . . .60 P5249569 . . . . . . . . . . . . . . . .75 P5249708 . . . . . . . . . . . . .11, 30
P5249187 . . . . . . . . . . . . . . . .60 P5249570 . . . . . . . . . . . . . . . .16 P5249709 . . . . . . . . . . . . . . .109
P5249188 . . . . . . . . . . . . . . . .60 P5249581 . . . . . . . . . . . . . . . .58 P5249711 . . . . . . . . . . . . .14, 34
P5249199 . . . . . . . . . . . . . . . .38 P5249609 . . . . . . . . . . . . . . .109 P5249714 . . . . . . . . . . . . . . . .41
P5249200 . . . . . . . . . . . . . . . .38 P5249620 . . . . . . . . . . . . . . . .66 P5249715 . . . . . . . . . . . . . . .109
P5249201 . . . . . . . . . . . . . . . .38 P5249624 . . . . . . . . . . . . . . . .67 P5249716 . . . . . . . . . . . . . . .109
153
CELEBRATE MOPAR
THE WALTER P. CHRYSLER MUSEUM
Located on DaimlerChrysler’s Auburn Hills, Mich., vehicles. The museum contains more than 300
complex, the Walter P. Chrysler Museum contains vehicles overall and traces the company’s history
a collection of automobiles that spans nearly a from the early 1900s models to current Hemi-powered
century. Key elements of the display are iconic SRT lineup of vehicles.
vehicles of Chrysler’s illustrious past along with
For more information on the Walter P. Chrysler
custom street machines and concepts that clearly
Museum, please visit www.chryslerheritage.com.
contain the Mopar influence.
Mopar fans will recognize many of the dream

machines from the 1950s, ’60s and ’70s, including
classic muscle cars and record-setting race
WHERE TO FIND WHAT YOU NEED

Looking for some vehicle documentation for your The DaimlerChrysler Corporate Historical Collection
Mopar muscle car? Check out the DaimlerChrysler is a valuable resource for individuals interested
Corporate Historical Collection. The archived in learning more about the history of their classic
information contained there includes: Chrysler vehicles.
• Vehicle Specifications There are nominal charges for materials from the
• Owner’s and Service Manuals, 1915 to 1990 collection, so if you have any questions about
• Photographs informational materials or photographs, you can send
• Production Numbers an e-mail to [email protected] or you
• Build Records can write to:
And much more. DaimlerChrysler Corporate Historical Collection
12501 Chrysler Freeway
CIMS 410-11-21
Detroit, MI 48288
WANT TO KNOW MORE?

We want to hear from you! For more information on the parts listed in this catalog, please visit www.mopar.com
or contact us directly via the Mopar Direct Connection hot line at 1(888) 528 HEMI (4364).
10097 © 2006, DaimlerChrysler Motors Company, LLC. All rights reserved. Chrysler, Dodge, Jeep® and Mopar are registered trademarks of DaimlerChrysler Corporation. OOPM4612

Mopar Restoration Catalogue

Uploaded by

Copyright:

Available Formats

Mopar Restoration Catalogue

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Mopar Restoration Catalogue

Uploaded by

Copyright:

Available Formats

What products does Mopar offer for restoration projects?

What products does Mopar offer for restoration projects?

What resources does Mopar provide to help with restoration projects?

What resources does Mopar provide to help with restoration projects?

Part Number: P5153817

But Mopar’s Restoration Products Source Book

NOTICE EMISSIONS STATEMENT

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Small Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

For more information on the parts listed in this

Automatic Transmission. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Books . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127

engine; it represents a lifestyle and heyday of the Muscle Car era—and

attitude. It commands respect on the perform even better. Whether it just

street and is coveted by enthusiasts needs a cosmetic facelift or a complete

Mopar restoration parts, your Hemi to its full glory.

*9.0:1 compression ratio allows the use of current high-octane

*P5249667AC 426 Hemi Crate Engine —

B. Cast Iron Hemi Blocks

426 Hemi Cast Iron Street Blocks

*P5007667AB 426 Hemi Cast Iron Street Block —

P4529732 Rear Main Bearing Seal Retainer Kit

P4271961 Oil Seal Package (Hemi, Big Block)

A. C. Block Hardware Package

P5249259 Block Hardware Package (Hemi, Big Block)

D. Engine Teardown Gasket Set

P3412083 Engine Teardown Gasket Set

P5249708 Brass Core Plugs (426 Hemi and Big Block)

F. Classic Hemi Engine Installation Components

P4510281 Crank Pulley — Power Steering

*P5007251 Forged Race Crankshaft — 3.75" Stroke,

B. Crank Key Package

P5249822 Crank Key Package (426 Hemi, Big Block)

C. Crank Bolt Packages BIG BLOCK ENGINE DISPLACEMENT (CUBIC INCHES)

E. Thin Crank Vibration Damper

P3830183 Thin Crank Vibration Damper

P4529070AB Damper Degree Timing Tape

A. B. P5249636 Oil Slinger (Hemi, Big Block)

C. Double Roller Chain and Sprocket Sets

*P4452815 All-Out Race Chain and Sprockets —

D. Chrome-Plated Front Timing Chain Cover

P4349816 Chrome-Plated Front Timing Chain Cover

E. Chrome Bolt Package for Front Timing Cover

P4452795 Chrome Bolt Package for Front Timing

F. Front Cover Seal and Gasket

P4876280 Front Cover Seal (Hemi, Big Block)

P5249898 Forged Steel Connecting Rod —

*P4529315 Hydraulic Camshaft (1970–71 Street Hemi)

STREET HEMI ® REPLACEMENT CAMSHAFTS

P5249711 Camshaft Bearings —

Camshaft Sprocket Bolts (Not Pictured)

P4529561 Hydraulic Pushrods — 10.47" Intake,

CYLINDER HEADS, GASKETS

*P4876857 Aluminum Cylinder Head Assembly

C. Cast Iron Cylinder Heads

*P4876855 Cast Iron Cylinder Head Assembly

C. D. Cast Iron Head Steel Shim Gaskets

P4120247 Cast Iron Cylinder Head Steel Shim Gaskets—

P4529456 Composition Material Cylinder Head

B. Cylinder Head Hardware Kit A.

P5249570 Cylinder Head Hardware Kit

C. Cylinder Head Bolt Set