0% found this document useful (0 votes)
582 views92 pages

Analog Devices

Guia de analog devices

Uploaded by

Daniel Hernandez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
582 views92 pages

Analog Devices

Guia de analog devices

Uploaded by

Daniel Hernandez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 92

Analog Solutions Guide for FPGA-Based Designs

arrow.com
Collaborating with Analog Devices and Intel
Arrow has brought together Analog Devices and Intel and forged a partnership that brings new
solutions to the marketplace. This solutions guide is a compilation of Analog Devices’ offerings
that are compatible with Intel. In addition to listings of signal converter, RFIC, and signal
conditioning boards, the guide also presents solutions from the expanding partner ecosystem to
help customers dramatically reduce time to market.

ANALOG DOMAIN DIGITAL DOMAIN ANALOG DOMAIN


Signal acquisition and measurement Processing/Intelligence Signal generation and conditioning

Sense Condition Measure Compute Generate Condition

Analog Devices Intel Analog Devices

2
Table of Contents
Intel Portfolio Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Intel® Cyclone® 10 and Cyclone® V SoC/FPGA Boards . . . . . . . . . . . . . . 5

01 Intel® Arria® 10 FPGA Boards from Intel and Partners. . . . . . . . . . . . . . . . 6


Intel® Stratix® 10 FPGA Boards from Partners. . . . . . . . . . . . . . . . . . . . . . . 7
Intel® MAX® 10 FPGA Boards from Partners. . . . . . . . . . . . . . . . . . . . . . . . 7
Featured in this Guide: FPGA Boards. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-54

Analog Devices Boards with the FMC Connector


FMC Connector: Facilitating the JESD204 Interface . . . . . . . . . . . . . . 56
FMC Connector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
02 Select boards from Analog Devices with FMC Connectors. . . . . . . . . 60
List of FPGA boards with FMC Connectors. . . . . . . . . . . . . . . . . . . . . . . . 61
Featured in this Guide: ADI Boards with the FMC Connector. . . 62-71
Resources and References for FMC-based Boards . . . . . . . . . . . . . . . 72

Analog Devices Arduino Shields


Arduino Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

03 Select List of Arduino-Compatible Circuits from the Lab® Shields . 75


Select List of Arduino Shields for Sensors, Data Converters. . . . . . . . 76
Featured in this Guide: Analog Devices Arduino Shields. . . . . . . . 77-79
FPGA Boards with the Arduino Connector. . . . . . . . . . . . . . . . . . . . . . . . . 80

Analog Devices Pmod Daughter Boards


Pmod Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

04 Select List of “Circuits from the Lab” Boards . . . . . . . . . . . . . . . . . . . . . . 83


Select List of “Sensors, MEMS and Data Converters” Boards. . . . . . 84
Featured in this Guide: ADI Pmod Daughter Boards . . . . . . . . . . . 85-87
FPGA Boards with the Pmod Connector. . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Overview of Analog Devices Product Portfolio . . . . . . . . . 90


05 Next Steps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

arrow.com | 1 855 326 4757 3


Intel Portfolio Overview

MAX® The MAX® Series of programmable logic devices features a non-volatile architecture
and provides a mix of low cost and low power. MAX devices are broadly used for
general-purpose and power-sensitive designs in a wide variety of market segments to
perform functions that include I/O expansion, interface bridging, power management,
and FPGA configuration control. MAX 10 FPGAs are the latest product within the MAX
family, delivering a unique blend of small footprint, instant-on operation, and FPGA
flexibility, including more than enough capacity for soft CPU cores.

CYCLONE® The Cyclone® Series of FPGAs and SoC FPGAs are optimized for low-cost, high-volume
systems. Cyclone V FPGAs and SoC FPGAs deliver capacity, performance, and IP ideal
for the majority of embedded applications used in the industrial and automotive markets.

ARRIA® The Arria® Series of FPGAs and SoC FPGAs deliver a balance of performance and
power efficiency. Arria 10 FPGAs and SoC FPGAs are the latest products within the
Arria family. Arria 10 FPGAs and SoC FPGAs at 20 nm feature a unique combination of
speed, DSP performance, capacity and power efficiency, and are the only 20 nm FPGA
to integrate an embedded processor system.

STRATIX® The Stratix® Series of FPGAs and SoC FPGAs is optimized for the most demanding
systems where performance is paramount. Stratix 10 FPGAs and SoC FPGAs are the
latest product within the Stratix family. Fabricated on Intel 14 nm Tri-Gate technology,
Stratix 10 FPGAs and SoCs will offer industry-leading capacity, performance, and
architectural innovation for the most challenging computing, signal-processing, and
software-defined networking applications. Stratix 10 is proof in silicon that Intel and
Altera are indeed better together.

4
List of Intel Boards

Featured Intel® Cyclone® 10 and Cyclone® V SoC/FPGA


Boards from Intel and Partners
Partner Board Name Brief Description Category
Based on Cyclone V SoC with 110K LEs, the SoCKit
▶ Arrow SoCKit (Page 28) offers flexibility and control to evaluate all the Development kit
capabilities of the FPGA

▶ Critical Link MitySOM-5CSx (Page 14) SOM based on Cyclone V SoC with up to 110K LEs SOM

Development kit that includes the MitySOM-5CSx SOM


Critical Link MitySOM-5CSx Development Kit and a baseboard with Gigabit Ethernet, PCIe, SATA, and Development kit
more interfaces
Cyclone V SOM (with 110K LEs), designed for
Critical Link MitySOM-5CSx Imaging Board SOM
embedded vision and scientific imaging applications
Complete hardware and software framework designed
Critical Link MitySOM-5CSx Embed Img Dev Kit Development kit
to accelerate the development of vision applications
iW-RainboW-G17M-Q7 SOM Cyclone V SX SoC based Qseven compatible module.
▶ iWave Systems SOM, Development kit
(Page 16) Supports up to 110K LEs
High-accuracy data acquisition system based on
▶ NovTech IoTOctopus® (Page 20) SOM, Development kit
Cyclone V SoC (110K LEs)
Industry 4.0 gateway board with serial connectivity for Development kit,
▶ NovTech IoTCentipede™ (Page 22)
aggregation and protocol bridging pre-production board

NovTech Chameleon96 96Boards standard board with Cyclone V SoC SBC

Chameleon96TM with LVDS CAM 96Boards standard board with Cyclone V SoC with
▶ NovTech SBC, COTS, Development kit
(Page 18) LVDS CAM
Evaluation Kit for the NOVSOM™CV SOM, featuring
NovTech NOVPEKCV 2.0 Development kit
Cyclone V SoC
SOM based on Cyclone V SoC from 25K LEs and up to
▶ Shiratech Spark 102 (Page 24) SOM,SBC, Development kit
110K LEs. Two optional Fast Ethernet PHYs on board
SOM based on Cyclone V SoC from 25K LEs and up to
Shiratech Spark 100 SOM, SBC, Development kit
110K LEs
Intel Cyclone 10 GX FPGA Flexible evaluation platform based on 220K LE FPGA
▶ Terasic Development kit
Development Kit (Page 8) Intel Cyclone 10 GX FPGA
Dev kit based on Cyclone V SE 5CSEBA6U23I7 device
▶ Terasic DE10-Nano (Page 26) Development kit
(110K LEs)
Dev kit based on Cyclone V SoC 5CSEMA5F31C6
Terasic DE1-SoC Development kit
Device
CYC1000 with Intel Cyclone 10
▶ Trenz Electronic Intel Cyclone 10 LP module with 25K LEs SOM, COTS, Development kit
FPGA (Page 10)
Cyclone® 10 LP Reference Kit Reference kit based on CYC1000 Intel Cyclone 10 LP
▶ Trenz Electronic SOM, COTS, Development kit
(Page 12) module with 55K LEs

▶ Featured in this guide

Table of
Contents arrow.com | 1 855 326 4757 5
Featured Intel® Arria® 10 FPGA Boards from Intel® and
Partners
Partner Board Name Brief Description Category
Available with a 270K LE Intel Arria 10 SX. Options for 160K LE
▶ Critical Link MitySOM-A10S (Page 30) SOM
and 480K LE devices are also available
Development kit that includes the MitySOM-A10S SOM and a
Critical Link MitySOM-A10S Development Kit SOM
baseboard. Design files provided
Intel Arria 10 SOM designed for machine vision and scientific
Critical Link MitySOM-A10S Imaging Board SOM
imaging applications
Vision platform with built in image processing using the Intel
Critical Link MityCAM-C5000 Development kit
Arria 10 SoC
8MP vision platform with built in image processing using the
Critical Link MityCAM-C8000 Development kit
Intel Arria 10 SoC
Dream Chip with Intel Arria 10
Intel Arria 10 SOM (with 160 to 480K LEs) in a 29x29 mm
▶ Dream Chip SOM and Evaluation Baseboard SOM, Development kit
package. Ideal for vision applications and industrial automation
(Page 34)
iW-RainboW-G24M SOM and Based on the Intel Arria 10 SX/GX FPGA with the F34 package,
▶ iWave Systems SOM, Development kit
Development Platform (Page 32) with Dual FMC Connector, Display Port, HD-SDI IN/OUT, SFP+
Achilles Instant- Development Kit
SOM and development kit based on Intel Arria 10 SX
▶ REFLEX CES with Intel Arria 10 SoC SOM SOM, Development kit
(10AS066H2F34I1SG) device up to 660K LEs
(Page 36)
Features a 10AX115S2F45I1SG device and a one-year license
Terasic A10GFP Development kit
for the Intel Quartus Prime design software
Intel Arria10 GX FPGA
▶ Terasic Based on Intel Arria 10 GX with 1150K LEs Development kit
Development Kit (Page 38)
Intel Programmable Acceleration
Intel Arria 10 GX FPGA
▶ Terasic Card (PAC) with Intel Arria 10 GX Development kit
(10AX115N2F45E1SG) with 115K LEs
FPGA (Page 42)
TR10a-HL Intel Arria 10 Based on Intel Arria 10 GX with 1150K LEs, 8 PCIe Gen 3 and
▶ Terasic COTS, Development kit
Acceleration Card (Page 40) 4 QSFP+ connectors

▶ Featured in this guide

6
List of Intel Boards

Featured Intel® Stratix® 10 FPGA Boards from Partners


Partner Board Name Description Category
Complete design environment to test performance
Intel Stratix10 GX FPGA Development Kit
▶ Intel and capabilities available in Intel Stratix 10 GX Development kit
(Page 48)
FPGAs (2800K LEs)
Sargon Instant-Development Kit with Intel Development kit based on Intel Stratix 10 GX
▶ REFLEX CES COTS, Development kit
Stratix 10 FPGA FMC+ IDK (Page 46) FPGAs SX with 2800K LEs
Intel Stratix 10 GX/SX (2800K LEs) FPGA board
DE10-Pro with Intel Stratix 10 GX/SX FPGA
▶ Terasic with PCIe 3.0, 100G/40G QSFP28 modules, 4 COTS, Development kit
Development Kit (Page 44)
DDR4 SO-DIMM RAM

▶ Featured in this guide

Featured Intel® MAX® 10 FPGA Boards from Partners


Partner Board Name Description Category
Arduino-compatible development board based on Intel MAX 10
▶ Alorium Technology XLR8 (Page 54) Development kit
FPGA
Alorium Technology Snō Arduino-compatible module based on Intel MAX 10 FPGA SOM
SnōMākr is a breakout board for Alorium Technology’s Snō
Alorium Technology SnōMākr Development kit
FPGA Module
FPGA Mezzanine for Mezzannine card to add expansion capabilities (Grove,
▶ Shiratech Development kit
96Boards (Page 50) Raspberry Pi, Arduino) to 96Boards FPGA boards
Development kit based on Intel MAX 10 10M50DAF484C7G
Terasic DE10-Lite COTS, Development kit
Device
MAX1000 - IoT Maker FPGA IoT Maker Board based on Intel MAX 10 FPGA with 8K
Trenz Electronic SOM, COTS, Development kit
Board LEs
AnalogMAX - ADI Dust Smoke detector module with three sensors and Intel MAX 10
▶ Trenz Electronic SOM, COTS, Development kit
Sensor (Page 52) FPGA with 8K LEs

▶ Featured in this guide

Table of
Contents arrow.com | 1 855 326 4757 7
Headquartered in Hsinchu, Taiwan, Terasic is the leading developer and provider for FPGA-based
hardware & complex system solution. Experience includes high-end solutions for the industrial
and FPGA system markets, rugged system solutions, high performance computing, high frequency
trading, network processing, radar detection, instrumentation, etc. Terasic is an approved Analog
Devices Alliances Member.

Intel® Cyclone® 10 GX FPGA Development Kit


Kit Overview
The Intel Cyclone 10 GX FPGA Development Kit is an ideal starting point for applications, such as embedded vision, factory
automation, or video connectivity evaluation or concept proving.

Intel FMC LPC+

Transceiver X5
REFCLK X2
LVDS X32

CLKIN X2
Updated from JTAG Only

X32 Intel® MAX® 10 FPP X16 EMIF


NOR Flash DDR3 (256M x 40)
10M08SAU169 PFL X40
933 MHz

Intel® MAX® 10
USB Interface X3
10M08SAU169
Micro-USB 2.0 X4 Buttons,
On-Board Intel® FPGA JTAG Chain
X4 Switches, LEDs
Download Cable II
TX/RX-A/B
Intel® Cyclone® 10 GX FPGA
Superspeed Tranceiver
USB 3.1
USB 3.1 MUX/DRV XCVR x1 10CX220YF780E5G AS X4 EPCQ-L for
Type C DP/DM ULPI Configuration
USB 2.0 PHY

RJ-45 GigE PHY 88E1111


SGMII LVDS x1 QSPI 256 Mbit QSPI
Flash for Nios II
TX/RX
SFP+ XCVR x1
LVCMOS
TX/RX SMA Clock Out
SFP+ XCVR x1

Transceiver
X4

PCI Express Oscillators


LVDS
Transceivers X4 50M, 100M SMA Clock In
Programmable

Intel Cyclone 10 GX FPGA Development Kit Block Diagram

8
Intel Board with an FMC Connector

FMC Connector for a Scalable Approach Applications


The kit allows development of modular and scalable designs by using the FPGA >> Embedded vision
mezzanine card (FMC) connectors to interface to a FMC mezzanine card provided by >> Factory automation
Analog Devices and supporting protocols, such as JESD204B. >> Video connectivity

Resources
Board part #: DK-DEV-10CX220-A

Intel Cyclone 10 GX FPGA Development Kit

Featured Board from Analog Devices


A14-bit, 1300MSPS / 625MSPS dual analog-to-digital converter (ADC).
Features include:
1. JESD204B coded serial digital outputs with support for lane rates up to 16Gbps/
lane
2. Wide full power bandwidth supports IF sampling of signals up to 2GHz
3. Four Integrated wide-band decimation filter and NCO blocks supporting
multi-band receivers
4. Flexible SPI interface controls various product features and functions to meet
Part #: AD9695-1300EBZ specific system requirements

All Analog Devices FMC Connector boards for converters and RF transceivers are compatible with the
development platform. Select Analog Devices’ FMC connector are featured in the FMC section of this guide.

→ Contact Arrow for other board options

Table of
Contents arrow.com | 1 855 326 4757 9
Trenz Electronic develops, manufactures, integrates and distributes FPGA and SoC modules for
enterprises and research. The focus is on application-specific HDL and FPGA design as well as on
hardware and software development. Trenz Electronics is an approved Analog Devices Alliances
Member.

Intel® Cyclone® 10 LP FPGA : CYC1000 Board


Overview
The CYC1000 board from Trenz Electronic is a low-cost starter Programmer2, it’s a full featured plug & play solution without
board for the new Intel Cyclone 10 FPGA family. The board can additional costs. The CYC1000 is also perfect for implementing
be used for evaluation or in a customized version as a qualified a flexible soft core microcontroller, like NIOS II from Intel.
solution in an end product. With the implemented Arrow USB

Micro USB Arrow USB Intel® Cyclone® 10 LP


Connector Programmer2 LEDs 8×
10CLO25YU256C8G
SDRAM 64MBit 25K LEs Multiplier
Power Push Button 2×
Supply PLL Internal RAM
MEMS Oscillator
32Bit uController Nios® II Arduino Header
MEMS Oscillator
(Optional) SPI/I2C GPIO
Pmod Header
LVDS IF SDRAM IF
Flash 64MBit

3-Axis Accelerometer

CYC1000 Block Diagram

10
Intel Board with a Pmod and Arduino Connectors

The board features Pmod and Arduino connectors, enabling interoperability with a Applications
wide-ecosystem of daughter cards.
>> Commercial
>> Industrial
>> Test and measurement
>> IoT
>> Maker

Resources
Board part #: CYC1000

CYC1000 Board

Featured Pmod Board from Analog Devices

Fully Isolated Conductivity Measurement Data Acquisition System.

Part #: EVAL-CN0349-PMDZ

All Analog Devices Pmod and Arduino Connector boards are compatible with the development platform.
Select Analog Devices’ Pmod boards are featured in the Pmod section of this guide. Select Analog Devices’
Arduino boards are featured in the Arduino section of this guide.
→ Contact Arrow for other board options

Table of
Contents arrow.com | 1 855 326 4757 11
Trenz Electronic develops, manufactures, integrates and distributes FPGA and SoC modules for
enterprises and research. The focus is on application-specific HDL and FPGA design as well as on
hardware and software development. Trenz Electronics is an approved Analog Devices Alliances
Member.

Intel® Cyclone® 10 LP Reference Kit


Overview
The Cyclone10 LP Reference Kit from Trenz Electronic is applications. The board is fully qualified and ready to use for end
the worldwide first development board with a 55kLE Intel products and can also be ordered in customized variants to meet
Cyclone10 LP and a huge variety of interfaces for many specific end application requirements.

Cyclone 10 LP Reference Kit Block Diagram

On-Board Analog Devices Data Converter

Flexible 8-Channel
Combination 8 Channel, 12-Bit, Configurable ADC/DAC with on-chip Reference,
• 12-bit 400kSPS ADC
SPI interface
• 6us setting DAC
• GPIO pins
Part #: AD5592

12
Intel Board with Pmod and Arduino Connector

The board features both Arduino and Pmod connectors, enabling interoperability with Applications
a wide-ecosystem of daughter cards.
>> Commercial
>> Industrial
>> Test and measurement
>> IoT end nodes
>> Makers and hobbyists
>> Students

Resources
Board part #: C10LP-Reference Kit
Contact Arrow for more information.

Cyclone 10 LP Reference Kit

Featured Pmod Board from Analog Devices

4-channel 4.8 kHz 24-bit A/D Converter powered 16-bit Digital-to-Analog converter powered by the
by Analog Devices’ AD7193 converter Analog Devices AD5541A

Part #: 410-243 Part #: 410-241

All Analog Devices Pmod Connector boards and Arduino Shields are compatible with the development
platform. Select Analog Devices’ Pmod boards are featured in the Pmod section of this guide. Select Analog
Devices’ Arduino boards are featured in the Arduino section of this guide.
→ Contact Arrow for other board options

Table of
Contents arrow.com | 1 855 326 4757 13
Established in 1997, Critical Link develops embedded solutions for a wide range of applications.
They are a platinum member of the intel design services network and Intel IoT Solutions Alliance,
and a certified member of the Arrow Consulting Engineering Services (ACES) network. Critical Link
is based in Syracuse, NY. Critical Link is an approved Analog Devices Alliances Member.

Cyclone® V SoC: MitySOM-5CSx


SOM Overview
The MitySOM-5CSx from Critical Link is a family of highly- and onboard power supplies. By combining six 3.125Gbps
configurable, small form-factor System on Module (SOM) transceivers, one PCIe hard core, up to 133 user I/O, and dual
designed for high-throughput applications requiring single Gigabit Ethernet interfaces, the system can simultaneously
or dual hard-core Cortex-A9 applications processors tightly acquire and efficiently process large amounts of data. The
integrated with FPGA fabric. The MitySOM-5CSx combines MitySOM-5CSx provides a complete and flexible CPU and FPGA
the Cyclone V System on Chip (SoC), memory subsystems infrastructure for highly-integrated embedded systems.

Up To
Up To Up To Up To Up To
512 MB
512 MB 512 MB 512 MB 512 MB
DDR3 RAM Temperature
DDR3 RAM DDR3 RAM DDR3 RAM DDR3 RAM
x8 (LM73)
x8 x8 x8 x8
(ECC)
RGB LED
(LP5562)

16Kb
EEPROM

HPS DDR3 Interface (Maximum 32 bits wide + 8 bits ECC) RTC


(AB1803)
I2C0

QUAD SPI QUAD SPI


Boot FLASH Boot FLASH
Cyclone® V SX w/6x 3.125Gbps Xcvrs 16 MB NOR Up-to 32 MB
or
Power Supply Cyclone® V SE w/o Xcvrs
Generation JRAG Connector
Up-to 133 User FPGA I/O or 107 User FPGA I/O with FPGA DDR
And 44 User HPS I/O (HPS & FPGA)
Sequencing
Up-to Dual ARM Cortex A9 925 MHz Up-to 512 MB
FPGA Fabric + High Speed Interconnect DDR3 RAM
X8
(optional)
26

10 2 16 12 14 5 3 8 68 32 6 1
USB1

28
RGMII1 / NAND / GPIOs
HPS GPI ID

6 TX, 6 RX, 2 RefClk,

Bank3A/5A FPGA I/O

USB OTG PHY


Cyclon e V SX on ly

Bank3B FPGA I/O

Bank8A FPGA I/O

Bank5A FPGA I/O


HPS CLK/RESET

Bank4A FPGA I/O

No FPGA DDR)
FPGA CONFIG
SDMMC/USB0
UART0 TX/RX
3.125Gbps

(Expanded IO
CAN/I2C/SPI

MSEL
+VIO_EN_2.5V

OTG USB 1

5
+3VBAT

+V_B3B
+V_B4A

+V_B8A
+5VIN
+1.8V

314-pin Edge Connector

MitySOM-5CSx SOM Block Diagram

14
Intel Board with an HSMC Connector

MitySOM-5CSx Development Kit Applications


Each MitySOM-5CSx Development Kit includes a compatible MitySOM-5CSx module >> Machine vision
and a base board that features an array of interfaces and expansion headers such as >> Scientific imaging
USB, Debug RS232 to USB Console, Full HSMC Expansion Connector, Partial HSMC >> Motor control
Expansion Connector, PCIe x4 Expansion Header, MMC/SD Card, Gigabit Ethernet >> Medical imaging
and Dual CAN Bus interfaces. >> Medical instrumentation
>> Test and measurement
>> Industrial instrumentation
>> Military / aerospace
MitySOM-5CSx

Resources
Board part #: 80-000640

MitySOM-5CSx Development Kit

Featured Board from Analog Devices

Demonstration circuit 2085 supports the LTC2000 and LTC2000A, a high speed, high
dynamic range family of DACs. It was specially designed for applications that require
differential DC coupled outputs. DC2085 supports the complete family of the LTC2000
including 16, 14 and 11 bit parts.

Part #: DC2085A-A

All Analog Devices FMC Connector boards for converters and RF transceivers are compatible with the
MitySOM- 5CSx Development Kit via the HSMC to FMC transposer board. Select Analog Devices’ FMC
boards are featured in the FMC section of this guide.
→ Contact Arrow for other board options

Table of
Contents arrow.com | 1 855 326 4757 15
Established in 1999, iWave focuses on standard and customized System on Module/ SBC
product development in Industrial, Medical, Automotive & Embedded Computing application
domains. iWave Systems provides engineering design services involving embedded hardware,
FPGA and software development. iWave is a certified ARM partner and Platinum member of the
Intel FPGA Design Solution Network, and is headquartered in Bangalore, India.

Cyclone® V SoC: iW-RainboW-G17M-Q7 SOM &


Development Platform
SOM Overview
The Cyclone V SoC SOM from iWave is Qseven compatible and The improved logic integration with integrated high speed
based on the Cyclone V SX SoC. The Dual ARM Cortex-A9 ®
transceivers and hard memory controllers provides increased
core with the FPGA allows greater flexibility for the system bandwidth capacity which is ideal for cost-sensitive high end
designers and helps lower system cost and power consumption. applications.

Hard Processor System 5V


(Dual-core
ARM® Cortex™-A9
MP Core processor) Micro SD Connector
1

DDR3 RAM (512MB)


SDRAM SD/MMC (8bit)1
DDR3 ECC (8 bit)Controller SD/MMC
DDR3 for ECC (256MB)
SPIM0
QSPI Flash (16MB) QSPI I2C0, I2C1

I2C UART0
EEPROM* I2C0
UART1
I2C CAN
RTC Controller I2C0 CAN1
WDOG
GPIO

EMAC1
HPS JTAG* JTAG

USB1
EPCQ Flash*
Cyclone® V SX
QSPI Flash (64MB)* SoC FPGA

AS Interface DDR3 Controller DDR3 (16bit) DDR3 RAM


FPGA AS Header* Active Serial
(Soft IP) (256MB)
CH0
FPGA JTAG PCIe PCIe x 4 Port
JTAG CH1
Transceiver
High Speed

HardIP
CH2
CH3
FPGA Dedicated CH5 SATA SATA x 1 Port
General Purpose Clock I/Ps (2 LVDS/2 SE) Clock IOs CH6 Soft IP
General Purpose Clock O/Ps (1 LVDS/2 SE) (2.5V Differential /
80 Pin 2.5V Single Ended) AC97/I2S(Soft IP) AC97/I2S x 1 Port
Expansion 9 TX LVDS Pairs/18 DE IOs 3.3V Single Ended
Connector FPGA IOs
11 RX LVDS Pairs/22 S E IOs FPGA IOs 8 Single Ended IOs/LPC Interface
(2.5V Differential /
(3.3V Single
5 Single Ended IOs 2.5V Single Ended) PWM
Ended)

SMBUS/2 SE IOs SMBUS (Soft IP) LCD (Soft IP) LVDS LCD (24bpp) x 2 Port
3.3V Single Ended 2.5V Differential

* Optional featured. Not supported by default.


1 On-SOM Micro SD Connector and Qseven Edge SD/MMC are sharing the same interface

iW-RainboW-G17M-Q7 SOM & Development Platform Block Diagram

16
Intel Board with Pmod Connector

iW-RainboW-G17D Cyclone V SoC Development Kit Applications


Cyclone V SoC Development Platform equipped with Cyclone V  SoC based >> Machine vision
Qseven SOM and generic Qseven carrier card for increased system performance >> Video surveillance
requirements. The Dual ARM® Cortex-A9 core with the FPGA allows greater flexibility >> Smart grid
for system designers and helps lower system cost and power consumption. The >> Industrial automation
improved logic integration with integrated high speed transceivers and hard memory >> IoT
controllers provides increased bandwidth capacity which is ideal for cost-sensitive
high end applications.

Resources
Board part #:
• iW-G17D-Q702-3E512M-S004G-LCA
• iW-G17D-Q702-3E512M-S004G-LCB
Cyclone V SoC • iW-G17M-Q702-3E512M-S000G-LIB
Development Kit Contact Arrow for more information.

Featured Board from Analog Devices

12-Bit, 300 kSPS, Single-Supply, Fully Isolated, Data Acquisition System for 4-20
mA Inputs. The total error after room temperature calibration is ±0.06% FSR
over a ±10°C temperature change, making it ideal for a wide variety of industrial
measurements. The small footprint of the circuit makes this combination an
industry-leading solution for 4 mA to 20 mA data acquisition systems where the
Part #: EVAL-CN0336-PMDZ accuracy, speed, cost, and size play a critical role.

All Analog Devices Pmod Connector boards are compatible with the development platform. Select Analog
Devices’ Pmod boards are featured in the Pmod section of this guide.

→ Contact Arrow for other board options

Table of
Contents arrow.com | 1 855 326 4757 17
NovTech, Inc. was founded in 1998 by a group of engineers with a wide assortment of skills.
With the goal to provide rapid system solutions to OEMs, NovTech has designed and produced
over 300 turnkey solutions for the aerospace, automotive, consumer, industrial, medical and home
automation industries. NovTech solutions range from System on Mod­ule (SOM), Single Board
Computers (SBC), applica­tion specific solutions and custom designs.

Cyclone® V SoC: Chameleon96™-Vision, a 96Boards


with LVDS Camera
Overview
The Chameleon96™-Vision is based on NovTech’s Cyclone V The Chameleon96™ meets all 96Boards mandatory
SoC 96Boards. The Vision add-on board features an 5MP LVDS specifications (excluding MIPI SDI Interface) and most optional
interface industrial camera with an ambient light sensor and specifications. The Chameleon96™ features Dual ARM®
‘mobile phone’ type 3X accelerometer. The -3X version features Cortex-A9 processors, an FPGA fabric, and a set of peripherals
a high-end 3X accelerometer and 3X gyroscope. that allow direct interfacing and connecting to MMC/SD card,
HDMI out, USB, WLAN/BLE, I2Cs, UARTs, SPIs and GPIOs.

Micro SD
Card
DDR3
HPS
25 MHz LEDs (x4) SDRAM
Reset
Micro USB USB 2.0 0TG x16
AB 512MB
USB
CH1 PHY
USB A
USB1
USB A
CH2 USB Cyclone® V UARTO* 3 pin
Header
USB to RS232
UART cable
Hub
CH3
GPIO (x3)
SOC UARTO*
SPI MO
5CSEBA6U19C8N SPI M1
Connector 30×2

Connector 20×2
I2C3
High Speed

I2CO, I2C1
Expansion

HPS
Low Speed
Expansion
GPIO (x12)

LVDS LVDS SecureRF


Camera Ironwood Key UART1 (HPS)
Add-On Agreement
Protocol IP

* UARTO not used concurrently.


Micro USB USB MAX II JTAG
Video FPGA SDIO Use UARTO pin Set 1 for 3 pin header
I/F I/F Use UARTO pin Set 0 for 20×2 connector
AB CTRL EPM570

RGB/ I2S2 UART SDIO/SPI +5.0V


USB Blaster II I2C2 (HPS)
CTRL (BT) (BT) (WiFi) +3.3V
+2.5V Board 8-18V DC
+1.8V Power
HDMI WiFi/BT Supplies
TX Module +1.2V 1.65mm
+1.1V DC Power Jack

HDMI

Chameleon96™ with LVDS CAM Board Block Diagram

18
Intel Board with 96Boards Specification

Applications
>> Industrial & manufacturing
>> Machinery
>> Robotics
>> Artificial intelligence

Resources
Board part #:
• Chameleon96-
Vision_001-130-0102_KIT
• Chameleon96-Vision_001-130-
0102-3X_KIT
Chameleon96™-Vision

On-Board Analog Devices’ Gyroscopes and Accelerometers

Ultralow noise, dual-axis 3-Axis, ±2 g/±4 Low Noise, Low Drift,


MEMS Gyroscope for g/±8 g/±16 g Digital Low Power, 3-Axis MEMS
Stabilization Applications Accelerometer Accelerometer

Part #: ADXR290* Part #: ADXL343 Part #: ADXL355*

* Only available on the Chameleon96-Vision_001-130-0102-3X_KIT version.

→ Contact Arrow for other board options

Table of
Contents arrow.com | 1 855 326 4757 19
NovTech, Inc. was founded in 1998 by a group of engineers with a wide assortment of skills.
With the goal to provide rapid system solutions to OEMs, NovTech has designed and produced
over 300 turnkey solutions for the aerospace, automotive, consumer, industrial, medical and home
automation industries. NovTech solutions range from System on Mod­ule (SOM), Single Board
Computers (SBC), applica­tion specific solutions and custom designs.

Cyclone® V SoC: IoTOctopus®


Solution Overview
The IoTOctopus from NovTech serves as a high-end industrial analyzes, stores and transmits data to gateways/local servers/
IoT node capable of high accuracy and high sampling rate cloud servers. Based on Cyclone V SoC, a dual-core ARM®
of electro-mechanical equipment. With its simultaneous Cortex-A9 and 110K LE fabric, the IoTOctopus processing
8-channels, 24-bit Sigma-Delta (∑-Δ), 32 KHz sample rate, the power computes, analyzes and transmits complex data in real
IoTOctopus converts analog signals to digital data, rearranges, time.

IoTOctopus Board Block Diagram

20
Intel Board with High-Accuracy ADC Interface and GPS based synchronization

High-Accuracy Analog to Digital Interface in the IoTOctopus Applications


.
The IoTOctopus incudes a high-accuracy analog to digital interface The IoTOctopus >> Smart grid
board includes the AD7770 – an 8-Channel, 24-Bit Simultaneous Sampling >> Smart city
Sigma-Delta ADC. >> Motor monitor/control
>> Engine monitor/control
>> Pump monitor/control
>> Turbine, elevator, A/C, power
generator, industrial battery charging,
and other electro-mechanical
equipment

Resources
Board part #:
IoTOctopus_001-125-0102_KIT

IoTOctopus

Key Features of the Analog Devices AD7770 Sigma-Delta ADC

AD7770
24-Bit Sigma-Delta ADC with current sources, switchable reference inputs and I/O Port. Key features include
>> Single-ended or true differential inputs
>> Programmable gain amplifier (PGA) per channel (gains of 1, 2, 4, and 8)
>> Low DC input current
>> ±4 nA (differential) and ±8 nA (single-ended)
>> Up to 32 kSPS output data rate (ODR) per channel
>> Programmable ODRs and bandwidth

→ Contact Arrow for other board options

Table of
Contents arrow.com | 1 855 326 4757 21
NovTech, Inc. was founded in 1998 by a group of engineers with a wide assortment of skills.
With the goal to provide rapid system solutions to OEMs, NovTech has designed and produced
over 300 turnkey solutions for the aerospace, automotive, consumer, industrial, medical and home
automation industries. NovTech solutions range from System on Mod­ule (SOM), Single Board
Computers (SBC), applica­tion specific solutions and custom designs.

IoTCentipede™
Solution Overview
The IoTCentipede from NovTech serves as an aggregator for ZigBee® , 4G/LTE, and any Xbee supported protocols. Data
a large collection of serial protocols deployed in industrial gathered from multiple nodes can be processed in near
automation and machinery applications. All serial connectivity real-time and sent to remote locations for further analysis or
ports - UART, I2C, SPI, CAN, IO-Link , 4-20mA loop - are
®
storage. IoTCentipede is a development board that can also act
isolated to allow direct connection to equipment in the real as an ideal reference for any new design that requires multiple
world. Wireless connectivity options include Wi-Fi , Bluetooth ,
® ®
serial interfaces.

Expansion Ports ISO


IO-Link 4-20mA/ ISO SPI
(Pmod/Arduino/
x4 HART GPIO
Proprietary)
ISO
SD I2C
SPI/UART
UART ISO
Terminal RS422
NOVSOM®CV
ISO
RTC
RS485
HPS FPGA
USB 2.0 RGMII ISO
RS232
SPI/UART/
SPI/UART/

GPIO
GPIO

ISO
UART

RGMII
SD

I2S

CAN RGMII
Gigabit Gigabit Gigabit
Ethernet Ethernet Ethernet 802.11/BT XBee I XBee II

IoTCentipede™ Block Diagram

IoTCentipede Block Diagram

22
Intel Board with Pmod and Arduino Connectors

The IoTCentipede features both Pmod and Arduino connectors, enabling Applications
interoperability with data converter, sensor and “Circuit from the Lab” Pmod and
>> Equipment upgrading to Industry 4.0
Arduino shields from Analog Devices. Contact Arrow for a complete list of Analog
>> Programmable Logic Controllers
Devices’ Pmod and Arduino boards.
(PLCs)
>> Industrial Ethernet gateway
>> Production floor
>> Office automation

Resources
Board part #:
IoTCentipede_001-129-0102_KIT

IoTCentipede

Featured Pmod and Arduino Boards from Analog Devices

12-Bit, 300 kSPS, Single-Supply, Fully Isolated, Ultra-low power, 3-axis, ±200 g MEMS
Data Acquisition System for 4-20 mA Inputs accelerometer that consumes 22 μA at a
3200 Hz output data rate (ODR)

Part #: EVAL-CN0336-PMDZ Part #: EVAL-ADXL372-ARDZ

All Analog Devices Pmod Connector boards and Arduino Shields are compatible with the development
platform.

→ Contact Arrow for other board options

Table of
Contents arrow.com | 1 855 326 4757 23
Shiratech produces ARM system on modules that cut time to market significantly and reduce
project development risk. The company has expanded the SOM concept to help evaluate new
technologies with 96Boards community Mezzanines. Shiratech is an approved Analog Devices
Alliances Member.

Cyclone® V SoC: Spark 102 SOM


SOM Overview
The Spark-102 board from Shiratech is a low cost, ready to fast bring up of networking applications. The Spark-102 uses a
use industrial embedded SOM based on Cyclone V SOC. The standard SMARC interface, which is supported by key industry
Spark-102 combines a high performance ARM using one or two vendors, and ensures adherence to strict technical specifications
Cortex-A9 cores and a configurable FPGA. One Gigabit Ethernet as well as compatibility with other vendor’s platforms.
and another optional two Fast Ethernet on board Phys enable

SPARK-102

Ready to use system Cyclone® V SoC


4GB eMMC, 1GB DDR,
QSPI NOR
Standard SMARC ® interface - 314 pin

Interfaces: HPS
GE, USB
I2C and GPIO
Linux demo for industrial
Ethernet

Ready to use
Industrial Ethernet
Interfaces:
2 Build in Ethernet Phy
Build in Security CPLD FPGA
E2PROM
FPGA IPs
Softing
LCD display

Spark 102 SOM Block Diagram

24
Intel Board with an HSMC Connector

CB-52 Development Board Applications


The CB-52 is a full-featured development board for the Shiratech Spark-102, with >> Industrial machines
an emphasis on Industrial Ethernet and networking applications. It provides extensive >> Industrial automation
connectivity to both HPS and FPGA, with built in networking and connectivity >> Communications systems
interfaces along with an HSMC slot for expansion modules and capacitive touch >> Robotics, Incorporated in the device
screen. >> Industrial Ethernet (EtherCat,
Profinet, Ethernet/IP)
>> Video FPGA IP
Spark 102 SOM

Resources
Board part #: CB-52-PUS-110-SX

CB-52 Development Board

Featured Boards from Analog Devices

Demonstration circuit 2390A is a general-purpose test Dual AD channels with 14-bit resolution and data rate up to
platform for prototyping and evaluating some of the key 65 MSPS (part #: AD9248)
applications for the LTC2500 family of high resolution, Dual DA channels with 14-bit resolution and data rate up to
oversampling ADCs 125 MSPS (part #: AD9767)
Part #: DC2390A-A Part #: THDB_ADA

All Analog Devices FMC Connector boards for converters and RF transceivers are compatible with the
CB-52 Development Board via the HSMC to FMC transposer board.

→ Contact Arrow for other board options

Table of
Contents arrow.com | 1 855 326 4757 25
Headquartered in Hsinchu, Taiwan, Terasic is the leading developer and provider for FPGA-based
hardware & complex system solution. Experience includes high-end solutions for the industrial and
FPGA system markets, rugged system solutions, High Performance Computing, High Frequency
Trading, network processing, radar detection, instrumentation, etc. Terasic is an approved Analog
Devices Alliances Member.

Cyclone® V SoC Development Kit: DE10-Nano Kit


Overview
The Terasic DE10-Nano development board, based on the analog to digital capabilities, accelerometer, HDMI TX and
Cyclone V SoC FPGA (110K LEs), provides a reconfigurable Gigabit Ethernet PHY. The kit includes two GPIO expansion
hardware design platform for makers, IoT developers and headers, an Arduino header, and an HDMI port.
educators. The kit comes with high-speed DDR3 memory,

DE10-Nano Kit Block Diagram

26
Intel Board with an Arduino Connector

DE10-Nano Development Board Applications


The DE10-Nano features an onboard Intel® FPGA Download Cable II, SDRAM, >> Education
2x40-pin expansion headers, and a 12-Bit Resolution ADC. >> Robotics &AI
>> IoT
>> Multimedia
>> Embedded system development

Resources
Board part #: P0496

DE10-Nano Development Board

Featured Arduino Shields from Analog Devices

Ultra-low power, 3-axis, ±200 g MEMS


Dual Electrochemical Gas Sensor with
accelerometer that consumes 22 μA at a
Temperature Compensation
3200 Hz output data rate (ODR)
Part #: EVAL-CN0396-ARDZ Part #: EVAL-ADXL372-ARDZ

All Analog Devices Arduino Shields for converters, sensors and “Circuit from the Lab” series are compatble
with the development platform. Select Analog Devices’ Arduino boards are featured in the Arduino section of
this guide.
→ Contact Arrow for other board options

Table of
Contents arrow.com | 1 855 326 4757 27
Cyclone® V SoC Development Kit: SoCKit
Overview
Based on the 5CSXFC6D6F31 device, the SoCKit from Arrow capabilities, and Ethernet networking. In addition, an on-board
offers flexibility and control to evaluate all the capabilities of HSMC connector with high-speed transceivers allows for an
the Cyclone V SoC. The SoCKit development board includes even greater array of hardware setups.
hardware such as high-speed DDR3 memory, video and audio

Cyclone V SoCKit Block Diagram

28
Intel Board with an HSMC Connector

Cyclone V SoCKit Applications


The board has features that allow users to implement a wide range of designed >> Industrial control
circuits, from simple circuits to various multimedia projects. >> HMI
>> Multi-media applications
>> Prototyping and evaluation

Resources
Board part #: SoCKit

Cyclone® V SoCKit

Featured Board from Analog Devices

Gasket adapter board that allows DC890-compatible data converter


eval boards to interface with FPGA boards that have an HSMC
connector like the SoCKit.

Part #: DC2511A

All Analog Devices boards with the HSMC Connector are compatible with the SoCKit. Boards with the FMC
Connector can also be used via the HSMC to FMC transposer board. Select Analog Devices’ FMC boards
are featured in the FMC section of this guide.
→ Contact Arrow for other board options

Table of
Contents arrow.com | 1 855 326 4757 29
Established in 1997, Critical Link develops embedded solutions for a wide range of applications.
They are a Platinum member of the Intel Design Services Network and Intel IoT Solutions Alliance,
and a certified member of the Arrow Consulting Engineering Services (ACES) network. Critical Link
is based in Syracuse, NY. Critical Link is an approved Analog Devices Alliances Member.

Intel® Arria® 10: MitySOM-A10S


SOM Overview
The Critical Link MitySOM-A10S with dual-side connectors is The MitySOM-A10S-DSC is available with a 270K LE Intel
an Intel Arria 10 SoC board-level solution for machine vision Arria 10 SX which provides dual-core Cortex-A9 32-bit RISC
and scientific imaging applications, and other stack-through processors with dual NEON SIMD coprocessors. Options up to
configurations. In addition to the Intel Arria 10 processor, the 480K LE devices are available. This MPU can run a rich set of
module includes on-board power supplies, two DDR4 RAM real-time operating systems containing software APIs expected
memory subsystems, micro SD card, a USB 2.0 on the go (OTG) by modern system designers. The ARM architecture supports
port, and a temperature sensor. The MitySOM-A10S-DSC several operating systems, including Linux.
provides a complete and flexible CPU infrastructure for highly
integrated embedded systems.

FPGA DDR4
HPS DDR4
2GB RAM
4 GB RAM
2x (8Gb x 8)
4x (8Gb x8)
+12V or +5V
Power Input Option
+5V
4.25 GB/sec J3 FAN J1 FAN
8.5 GB/sec
Power CTRL CTRL
Subsystem
+12V Banks Banks
3C and 3D 2J and 2K
12C PPLs
8 Clocks Bank 1D
Bank 3B

I2C0 Intel® Arria® 10 270K LE FPGA


Temp Dual Core Cortex-A9 @ 1500 MHz
Sensor
J2 Bank 3A Bank 1C
JTAG
29x29 mm package (780 pins)
I2C0
Temp 10AS027E3F29I2SG
Sensor 8 GB
eMMC
I2C0 HPS/CSS
Bank Bank 8 XCVR Pair
RTC Bank
Micro 2A 2L (HPS)
SD Shared IO)
I2C0
I2C0 4 XCVR Pair
EEPROM
USB 2.0
OTG
I2CO
PHY
Power
Supply

J4
J600
Samtec 320 Pin SEAM-40-02.0-XX-08-X-A
Hirose 144 Pin FX10A-144P-SV1 (71)
138 FPGA IO (66 LVDS Pairs), 4 XCVR + Clk Pair,
8 XVCR + Clk Pair
40 HPS & Shared IO (Console UART, Dedicated I2C)

MitySOM-A10S SOM Block Diagram

30
Intel Board with an FMC Connector

MitySOM-A 10S Development Kit Applications


MitySOM-A10S development kit includes the baseboard, the MitySOM and design >> Test and measurement
files for the base board. It also comes with a carrier board design guide available >> Industrial automation and control
for custom board development. The baseboard includes an FMC connector for >> Industrial instrumentation
interfacing with analog base boards. >> Medical instrumentation
>> Embedded imaging
>> Machine vision
>> Medical imaging
>> Closed loop motor control

Resources
Board part #: 80-001181

MitySOM-A10S Development Kit

Featured Board from Analog Devices

The ADRV9009-W/PCBZ is a radio card designed to showcase the ADRV9009,


the widest bandwidth, highest performance RF integrated transceiver. The radio
card provides a single 2x2 transceiver platform for device evaluation and rapid
prototyping of radio solutions.

Part #: ADRV9009-W/PCBZ

All Analog Devices FMC Connector boards for converters and RF transceivers are compatible with the
MitySOM-A10S development kit. Select Analog Devices’ FMC boards are featured in the FMC section of
this guide.
→ Contact Arrow for other board options

Table of
Contents arrow.com | 1 855 326 4757 31
Established in 1999, iWave focuses on standard and customized System on Module/ SBC
product development in Industrial, Medical, Automotive & Embedded Computing application
domains. iWave Systems Provides engineering design services involving embedded hardware,
FPGA and software development. iWave is a certified ARM partner and Platinum member of the
Intel FPGA Design Solution Network, and is headquartered in Bangalore, India.

Intel® Arria® 10 FPGA SoC: iW-RainboW-G24M SOM


and Development Platform
SOM Overview
iWave’s Intel Arria 10 SoC System on Module is based on the optional ECC and 64-bit DDR4 support for FPGA. All the IOs
Intel Arria 10 SX family device with F34 package. The module and high speed transceiver blocks will be available on the SOM
is equipped with 32-bit DDR4 memory support for HPS with board to board connector.

Power 5V Power IN
Power to
Hard Processor System Regulators
Peripherals
(Dual ARM® Cortex™- A9)
DDR4 (32bit) UTMI USB2.0 USB OTG
DDR4 – 1GB USB1
(Upgradable) SDRAM
PHY
Controller
DDR4 ECC (8bit) (Bank 2J & 2K) RGMII Ethernet Gigabit Ethernet
EMAC1
DDR4 (ECC) PHY
Debug UART
SD (4bit) UART0
Micro SD
SDMMC UART (with CTS & RTS)
Connector UART1
SPI
NAND -1GB NAND SPIM0
NAND I2C
I2C1
GPIOs (Upto 10nos) SOM
GPIOs Board to Board
High Speed
Conenctor2
Intel® Arria® 10 SX/GX (240Pin)
High Speed Transceiver
FPGA (2 Channels from Bank 1E)
High Speed Transceiver (6 Channels) Transceiver PHY
Transceiver PHY

Bank 1C High Speed Transceiver (6 Channels)


High Speed Transceiver (6 Channels) Bank 1F
SOM
Bank 1D
Board to Board
High Speed High Speed Transceiver (4 Channels)
Bank 1E FPGA IOs (24LVDS/48SE)
Conenctor1 Bank 3B
FPGA IOs

(240Pin) FPGA IOs (24LVDS/48SE)


FPGA IOs (46SE) Bank 3C
FPGA IOs

Bank 2A
FPGA IOs (46SE) Bank DDR4 (64bit) DDR4 RAM
Bank 3A
3D,3E,3F

FPGA AS AS Interface JTAG FPGA/HPS


Header e Serial JTAG
JTAG Header
Configura
Flash 5V
FAN Header

Note:
• HPS (Hard Processing System) is supported only in Intel® Arria®10 SoC family (SX) devices
• All IOs in SOM Board to Board connectors are 1.8V tolerant IOs. Optic, Bank 2A and Bank 3A supports variable IO level setting (1.8V, 1.5V, 1.35V, 1.2V)
• Each FPGA IO Bank (2A, 3A, 3B, 3C) which goes to Expansion connectors support two General Purpose Clock input (1 in 2A) & two General Purpose Clock Output (LVDS/SE)
• Since 3D, 3E & 3F banks are available only in some version of Arria10 parts, FPGA DDR4 (64bit) can be supported only where these banks supported devices are used

iW-RainboW-G24M SOM Block Diagram

Arria 10 SoC SOM - BLOCK DIAGRAM


32
Intel Board with an FMC Connector

iWave Intel Arria 10 SoC FPGA Development Kit Applications


iWave’s Intel Arria 10 SoC/FPGA Development kit comprises of Intel Arria 10 SoC/ >> High processing computing
FPGA SOM and custom carrier card. The SOM is equipped with 32-bit DDR4 mem- >> High precision test & measurement
ory support for HPS with optional ECC and 64-bit DDR4 support for FPGA. The Intel >> Medical imaging diagnostics
Arria10 development kit carrier board supports required set of features like Dual FMC equipment
Connector, Display Port, SATA 3.0, Type C USB3.0 Port, PCIe x 1 Lane, HD-SDI IN/ >> Wireless infrastructure
OUT & SFP+ Port and other On-Board connectors to validate Intel Arria10 SoC HPS >> Broadcasting & distribution
interfaces. equipment
Intel® Arria® 10 SOM >> Compute & storage equipment
>> Control and intelligence equipment
>> Cloud computing

Resources
Board part #:

• IW-G24D-CU2F-4E002G-S008G-LCC

• iW-G24M-CU2F-4E002G-S000G-BEC

• iW-G24D-CU2F-4E002G-S008G-LCF
Intel Arria 10 SoC FPGA Development Kit
• iW-G24M-CU2F-4E002G-S000G-BEE

Featured Board from Analog Devices

The AD-FMCDAQ2-EBZ module is comprised of the AD9680 dual, 14-bit,


1.0 GSPS, JESD204B ADC, the AD9144 quad, 16-bit, 2.8 GSPS, JESD204B
DAC, the AD9523-1 14-output, 1GHz clock, and power management
components.

Part #: AD-FMCDAQ2-EBZ

All Analog Devices FMC Connector boards for converters and RF transceivers are compatible with the
development platform. Select Analog Devices’ FMC boards are featured in the FMC section of this guide.

→ Contact Arrow for other board options

Table of
Contents arrow.com | 1 855 326 4757 33
Dream Chip Technologies is Germany’s largest independent engineering service provider with
over 25 years of experience in the development and design of ASICs, SoCs, FPGAs, embedded
software and discrete systems. End application expertise includes automotive, broadcast,
consumer, industrial, and medical markets.

Dream Chip with Intel® Arria® 10 SOM and Evaluation


Baseboard
SOM Overview
The Dream Chip with Intel Arria 10 SOM was developed with an in a small 8 cm by 6.5 cm form factor. Power management on the
emphasis on embedded and various vision applications. Using module guarantees proper power-up and -down sequence, only
the Intel Arria 10 SoC devices (with 160 to 480K LEs) in the 12V to be supplied by baseboard.
29x29 mm package, the module offers a multitude of interfaces

Dream Chip with Intel Arria 10 SoC SOM and Baseboard Block Diagram

34
Intel Board with an FMC LPC Connector

Dream Chip with Intel Arria 10 Evaluation Baseboard Applications


Overview >> Embedded
The baseboard features include 1GBit Ethernet, 10Gbit Ethernet, PCIe Gen3 x4, >> Machine and intelligent vision
USB 2.0 Host/Device, USB UART, video Genlock input, and an FMC LPC expansion >> Industrial
connector. >> Military
>> Single and multi camera systems
>> Vision platforms

Resources
Board part #: DCT10A-DEVKIT

Dream Chip with Intel Dream Chip with Intel Arria 10 Evaluation
Arria 10 SOM Baseboard

Featured Boards from Analog Devices

AD9434 ADC Evaluation Board, 500MSPS AD9467 Evaluation Board (16-bit, monolithic,
SPI, Controller/VisualAnalog IDE IF sampling analog-to-digital converter),
250MSPS

Part #: AD9434-FMC-500EBZ Part #: AD9467-FMC-250EBZ

All Analog Devices FMC LPC Connector boards for converters and RF transceivers are compatible with
the development platform.

→ Contact Arrow for other board options

Table of
Contents arrow.com | 1 855 326 4757 35
Since 2000, REFLEX CES has been designing and manufacturing high-speed boards and rugged
system solutions based on high-density FPGAs and processors. The company has vast experience
in leading-edge FPGA technology, and is always at the forefront of the market and trends. REFLEX
CES employs 100+ people, and is based in France (Paris area). REFLEX CES is an approved
Analog Devices Alliances Member.

Intel® Arria® 10 SoC: Achilles SOM


SOM Overview
The REFLEX CES Intel Arria10 SoC SOM provides to developers MPCore and up to 660K LEs of advanced low-power FPGA
the best out-of-the box experience combining the Best-In-Class logic elements, the Intel Arria 10 SoC combines the flexibility
compact hardware platform and the most efficient intuitive and ease of programming of a CPU with the configurability and
software environment. Featuring an ARM dual-core Cortex-A9 parallel processing power of an FPGA.

RTC

DDR4 Temp
EPCQ eMMC
HPS x32 Sensor I2C

TOP LEFT UART

RGMII x2 PHY
HPS Side ETH x2

10× XCVR ULPI PHY


ULPI 10× XCVR
14× XCVR
80× LVDS
FPGA Side 32× LVDS BOT 32× LVDS
TOP
RIGHT RIGHT
GPIF-II USB3.0
FX3
Intel® Arria® 10 FPGA - 660K LEs
I2C
UART
Intel® MAX® 10
BOT LEFT
DDR4 FPGA PLL
CLK +12V
x32 CLK
Power
Supervisor Power +12V
PMBus
External
Power

Achilles Intel Arria 10 SoC SOM Block Diagram

36
Intel Board with an FMC Connector

Achilles Instant-Development Kit Applications


Achilles Instant-DevKit is comprised of the Intel Arria 10 SoC SOM plus a Starter >> Automotive
board for quick prototyping and application testing. Comprehensive reference designs >> Video broadcast
are available for a good out-of-the-box experience. Source code is included in the >> Machine and intelligent vision
reference designs. >> Industrial, military
>> Test & measurement
>> Medical

Resources
Board part #:
RXCA10S066PF34-IDK0SA

Achilles Development Kit

Featured Boards from Analog Devices

The AD9208-3000EBZ supports the AD9208-3000, a AD9172 16 Bit 12.6G Samples Per Second Digital to
14-bit, 3GSPS dual analog-to-digital converter (ADC) Analog Converter (DAC) Evaluation Board

Part #: AD9208-3000EBZ Part #: AD9172-FMC-EBZ

All Analog Devices FMC Connector boards for converters and RF transceivers are compatible with the
development platform. Select Analog Devices’ FMC boards are featured in the FMC section of this guide.

→ Contact Arrow for other board options

Table of
Contents arrow.com | 1 855 326 4757 37
Headquartered in Hsinchu, Taiwan, Terasic is the leading developer and provider for FPGA-based
hardware & complex system solution. Experience includes high-end solutions for the industrial
and FPGA system markets, rugged system solutions, high performance computing, high frequency
trading, network processing, radar detection, instrumentation, etc. Terasic is an approved Analog
Devices Alliances Member.

Intel® Arria® 10 GX FPGA Development Kit


Kit Overview
The Intel Arria 10 GX FPGA Development Kit delivers a complete capabilities available in Intel Arria 10 GX FPGAs. The board runs
design environment that includes all hardware and software on the Intel Arria 10 GX 10AX115S2F45I1SG2 FPGA.
needed to start taking advantage of the performance and

Micro-
USB
2.0

FMCA FMCB
MAX II
On-Board
USB Blaster TM II
REFCLK x2

& USB Interface


REFCLK x2
CLKIN

CLKIN
x16

x16
JTAG Chain

HiLO
ENET FPGA External
(SGMII) Memory

QSFP
x4 Intel® Arria® 10
SFP + x1 GX EPCQ

Display Port x4 LCD


(TX)
SMA XCVR x1
NF5-1932 C Package Buttons
OUT P /N TBD Switches
SMA CLK x1 (SE ) LEDs
OUT
x8

Oscillators 128 MB
50 M, 125 M, PCI Express MAX V FLASH x32
CPLD (FPGA)
programmable x8 XCVRs

x1 (SE )

SMA CLK
IN

Intel Arria 10 GX FPGA Development Kit Block Diagram

38
Intel Board with an FMC Connector

FMC Connector for a Scalable Approach Applications


The kit allows development of modular and scalable designs by using the FPGA >> High performance computing
mezzanine card (FMC) connectors to interface to a FMC mezzanine card provided by >> Military and aerospace
Analog Devices and supporting protocols, such as JESD204B. >> Designs needing PCI exresss (PCIe)
3.0
>> Designs needing high-performance
memory (DDD4, DDR3, QDR IV, and
RLDRAM III)

Resources
Board part #: DK-DEV-10AX115S-A

Intel Arria 10 GX FPGA Development Kit

Featured Boards from Analog Devices

16-Bit, 12 GSPS, RF DAC 14-Bit, 3GSPS, JESD204B, Dual ADC

Part #: AD9162-FMCC-EBZ Part #: AD9208-3000EBZ

All Analog Devices FMC Connector boards for converters and RF transceivers are compatible with the
development platform. Select Analog Devices’ FMC boards are featured in the FMC section of this guide.

→ Contact Arrow for other board options

Table of
Contents arrow.com | 1 855 326 4757 39
Headquartered in Hsinchu, Taiwan, Terasic is the leading developer and provider for FPGA-based
hardware & complex system solution. Experience includes high-end solutions for the industrial
and FPGA system markets, rugged system solutions, high performance computing, high frequency
trading, network processing, radar detection, instrumentation, etc. Terasic is an approved Analog
Devices Alliances Member.

TR10a-HL Arria 10 Acceleration Card


Kit Overview
The Terasic TR10a-HL Arria® 10 GX FPGA Development Kit and straight connections to four external 100G/40G QSFP28
is ideal for designs that demand high capacity and bandwidth, modules. Also included are four independent banks of DDR4
memory interfacing, ultra-low latency communication, and SO-DIMM sockets with error correction code (ECC) and up to
power efficiency. The TR10a-HL is fully compliant with version 8GB@1200MHz for each socket.
3.0 of the PCI Express standard, supporting ultra low-latency,

TR10a-HL Arria 10 Acceleration Card Block Diagram

40
Intel Board with the PCIe 3 Gen3 x8 Edge Connector

Development Kit Hardware Contents Applications


• 115K LEs; On-Board USB Blaster II or JTAG Header for FPGA programming >> Low-latency trading
• Four QSFP+ Connectors; 8 PCI Express Edge Connectors (includes Windows PCIe >> Cloud computing
drivers) >> High-performance computing
• Six Independent 550 MHz QDRII+SRAMs, 18-bits Data Bus and 72Mbit for each >> 5G
• 50 MHz Oscillator, Programmable Clock Generator >> Military & aerospace
• Temperature Sensor, Power Monitor; Fan Control ;One RS422 Expansion Header >> Medical & biotech
>> Industrial control

Resources
Board part #: P0497

TR10a-HL Arria 10 Acceleration Card

Table of
Contents arrow.com | 1 855 326 4757 41
Headquartered in Hsinchu, Taiwan, Terasic is the leading developer and provider for FPGA-based
hardware & complex system solution. Experience includes high-end solutions for the industrial
and FPGA system markets, rugged system solutions, high performance computing, high frequency
trading, network processing, radar detection, instrumentation, etc.

TR10a-LPQ Arria 10 Acceleration Card


Kit Overview
Inspired by the demands of AI, Data Center, and High Frequency straight connections to two external 40G QSFP+ modules.
Trading, Terasic’s TR10a-LPQ (DDR4 & QDRII) are purpose- Also included are five ports of QDRII+ SRAM (QDRII version)/
built for acceleration and high-speed connectivity applications to two independent banks of DDR4 (DDR4 version), high-speed
address the demands of the next-generation high-performance parallel flash memory. The board has an Intel Arria 10 GX FPGA
systems. The TR10a-LPQ is fully compliant with version 3.0 (10AX115N2F45E1SG) with 115K LEs.
of the PCI Express standard, and supports ultra low-latency,

TR10a-LPQ Arria 10 FPGA Board Block Diagram

42
Intel Board with the PCIe 3 Gen3 x8 Edge Connector

Development Kit Hardware Contents Applications


• PCIe low profile form-factor >> High frequency trading
• PCIe x16 edge connector (includes dual pcie gen3 x8 interfaces) >> Cloud computing
• Allows ultra-low-latency, straight connections to 2 external 40G QSFP+ modules >> High-performance computing
• UART to USB for board management >> 5G connectivity
• 2x5 timing expansion header for 1pps or other high precision clock inputs >> Military & aerospace
>> Medical & biotech

Resources
Board part #: P0562

TR10a-LPQ Arria 10 Acceleration Card

Table of
Contents arrow.com | 1 855 326 4757 43
Headquartered in Hsinchu, Taiwan, Terasic is the leading developer and provider for FPGA-based
hardware & complex system solution. Experience includes high-end solutions for the industrial
and FPGA system markets, rugged system solutions, high performance computing, high frequency
trading, network processing, radar detection, instrumentation, etc. Terasic is an approved Analog
Devices Alliances Member.

DE10-Pro Stratix® 10 GX/SX FPGA Development Kit


Kit Overview
Terasic DE10-Pro Stratix 10 GX/SX (2800K LEs) FPGA straight connections to four external 100G/40G QSFP28
Development Kit is ideal for designs that demand high modules. Not relying on an external PHY will accelerate
capacity and bandwidth memory interfacing, ultra-low latency mainstream development of network applications enabling
communication, and power efficiency. customers to deploy designs for a broad range of high-speed

The Intel Stratix 10 GX/SX FPGA features integrated connectivity applications. For designs that demand high capacity

transceivers that transfer at a maximum of 28 Gbps, allowing and high speed for memory and storage, the DE10-Pro provides

the DE10-Pro to be fully compliant with version 3.0 of the PCI 4 independent banks of DDR4 SO-DIMM RAM modules and

Express standard, as well as allowing an ultra low-latency, high-speed parallel flash memory.

Intel® Stratix® 10

DE10-Pro Kit Block Diagram

44
Intel Board with the PCIe 3 Gen3 x16 Edge Connector

DE 10-Pro Kit Applications


The DE10-Pro board includes PCIe 3.0, 100G/40G QSFP28 modules, 4 DDR4 >> Low-latency trading
SO-DIMM RAM and high speed parallel flash memory for high speed connectivity >> AI & deep learning
applications. The feature-set of the DE10-Pro fully supports all high-intensity >> High-performance computing
applications such as low-latency trading, data acquisition, network processing, etc. >> Hardware security solutions &
gateways
>> Military & aerospace
>> Broadcast & video

Resources
Board part #: P0576

DE10-Pro Kit

FPGAs Supported
Intel Stratix 10 FPGA
• DE10-Pro-GH1E2S1: 1SG280HU1F50E2VGS1
• DE10-Pro-GL2E1: 1SG280LU2F50E1VG
• DE10-Pro-SL2E2S2: 1SX280LU2F50E2VGS2

Memory Supported
• Four SO-DIMM Sockets, support DDR4 SDRAM, QDR-IV and QDRII+ memory
modules
• 128M Parallel FLASH

Table of
Contents arrow.com | 1 855 326 4757 45
Since 2000, REFLEX CES has been designing and manufacturing high-speed boards and rugged
system solutions based on high-density FPGAs and processors. The company has vast experience
in leading-edge FPGA technology, and is always at the forefront of the market and trends. REFLEX
CES employs 100+ people, and is based in France (Paris area). REFLEX CES is an approved
Analog Devices Alliances Member.

Intel® Stratix® 10 FPGA: Sargon Instant-Development


Kit FMC+ IDK
Kit Overview
The Intel Stratix 10 FPGA FMC+ Instant-Development Kit and GUI interface allows an immediate start, and its reference
from REFLEX CES provides developers a solid out-of-the box designs enable fast turn-around designs, shortening and
experience, combining compact hardware platform with the securing developments.
most efficient intuitive software environment. Its unique install

DDR4 DDR4
Bank1 32GB Bank2 32GB
x72bit x72bit
TFT
RDIMM RDIMM 24 bits
DDR4 DDR4
SDI SDI
Bank1 16GB Bank2 16GB DDR4 In Out
x72bit x72bit Bank3 8GB
x72bit 8 LVDS, Clock In&Out IOs Extension
RDIMM RDIMM
1× XCVR 1× XCVR Connector

10× XCVR XCVR Extension


HPS mutual with
MiniSAS 4× XCVR FPGA Connector
SGMII PHY 10/100/1000
FireFly 4× XCVR
8811 BASE-T
RJ45

FireFly 4× XCVR Intel® Stratix® 10 FPGA with 2,800K LEs,


PPS signal 1.8V
24× XCVR L-Tile and H-Tile, GX and SX pin compatible COAX
FMC+ 80 LVDS commercial temp OSC
O-ring
+12PCIe PCIe ATX
NOR Flash Quad SPI
(x4)
HPS connector
1Gb Side Stx8
configurable UART POWER
clocks & 48×
UART to USB JTAG
BMC dedicated HPS MGT PMBUs Power
Memory clocks JTAG
16× XCVR Supervisor
Hub USB Blaster
I2C CLOCK MGT Intel® MAX® 10
daughter PCIe x16 Edge
x8 bits
Board MGT
Programmable x16 NOR
BMC/Intel® board for SX (PCIe x8 Gen4)
µUSB2.0 BMC PMBUs Flash
PLL on board SMBus
MAX®10 1Gb

Sargon Instant-Development Kit FMC+ IDK Block Diagram

46
Intel Board with an FMC+ Connector

First Intel Board with the FMC+ Connector Applications


FMC+ is the latest standard in the popular VITA FMC family. This specification >> High performance computing
increases the performance of FMC Standard by extending the total number of Gigabit >> IP & ASIC prototyping
Transceivers to 32 and increasing the maximum data rate to 28 Gbps.

Resources
Board part #:
RXCS10X280HAF50-IDK00A

Sargon Instant-Development Kit FMC+ IDK

Featured Board from Analog Devices

The ADRV9009-W/PCBZ is a radio card designed to showcase the


ADRV9009, the widest bandwidth, highest performance RF integrated
transceiver. The radio card provides a single 2x2 transceiver platform for
device evaluation and rapid prototyping of radio solutions.

Part #: ADRV9009-W/PCBZ

All Analog Devices FMC+ Connector boards for converters and RF transceivers are compatible with the
development platform. Boards supporting FMC+ are currently in development.

→ Contact Arrow for other board options

Table of
Contents arrow.com | 1 855 326 4757 47
Intel is an American multinational corporation and technology company headquartered in
Santa Clara, California, in the Silicon Valley. It is the world’s second largest and second highest
valued semiconductor chip maker and is the inventor of the x86 series of microprocessors, the
processors found in most personal computers (PCs). Intel supplies processors for computer
system manufacturers such as Apple, Lenovo, HP, and Dell. Intel also manufactures motherboard
chipsets, network interface controllers and integrated circuits, flash memory, graphics chips,
embedded processors and other devices related to communications and computing. Intel is an
approved Analog Devices Alliances Member.

Intel® Stratix® 10 GX FPGA Development Kit


SOM Overview
The Intel Stratix 10 GX FPGA Development Kit delivers a and capabilities available in Intel Stratix 10 GX FPGAs. Board
complete design environment that includes all hardware and was developed by Intel Programmable Solutions Group.
software needed to start taking advantage of the performance

FMC

x16

Intel FPGA Download Cable II


Mini-USB Intel® MAX® 10 DIP Switches, User Buttons,
User I/O Pins, User LEDs
x4
Mini DisplayPort (TX)
HILO Memory
10/100/1000 Ethernet QSPI
RJ-45 PHY (SGMII)
Intel® Stratix® 10
Flash
x1
SDI
x4
QSFP28 MAX V System Controller

x16 Power Manager

x16 PCIe Edge


Clocks
Fingers Power Regulators

Intel Stratix 10 GX FPGA Development Kit Block Diagram

48
Intel Board with an FMC Connector

FMC Connector for a Scalable Approach Applications


The kit allows development of modular and scalable designs by using the FPGA >> High performance computing
mezzanine card (FMC) connectors to interface to a FMC mezzanine card provided by >> Military and aerospace
Analog Devices and supporting protocols, such as JESD204B. >> Designs needing PCI exresss (PCIe)
3.0
>> Designs needing high-performance
memory (DDD4, DDR3, QDR IV, and
RLDRAM III)

Resources
Board part #:
• DK-DEV-1SGX-L-A
• DK-DEV-1SGX-H-A

Intel Stratix 10 GX FPGA Development Kit

Featured Boards from Analog Devices

12-Bit, 10.25 GSPS, JESD204B 14-Bit, 3GSPS, JESD204B, Dual 12-Bit, 2.6 GSPS/2.5 GSPS/2.0
RF Analog-to-Digital Converter ADC GSPS, 1.3 V/2.5 V ADC

Part #: AD9213-10GEBZ Part #: AD9208-3000EBZ Part #: AD-FMCADC2-EBZ

All Analog Devices FMC Connector boards for converters and RF transceivers are compatible with the
development platform. Select Analog Devices’ FMC boards are featured in the FMC section of this guide.

→ Contact Arrow for other board options

Table of
Contents arrow.com | 1 855 326 4757 49
Shiratech produces ARM system on modules that cut time-to-market significantly and reduce
project development risk. The company has expanded the SOM concept to help customers
evaluate new technologies with 96Boards community Mezzanines. Shiratech is an approved
Analog Devices Alliances Member.

Shiratech FPGA Mezzanine for 96Boards


SOM Overview
The Shiratech FPGA Mezzanine for 96Boards adds project. It offers design flexibility through the use of Raspberry
configurability to the embedded environment using the Intel Pi, Arduino & Grove connectors, which allow any combination of
MAX 10 FPGA. With the CPU and FPGA combo, designers can 3rd party sensors and actuators.
connect to any interface and add real time performance to a

96Boards CPU Programmable Sensors and


Connec�vity Logic Actuators

Shiratech FPGA Mezzanine

HS Connector
96Boards Mezzanine Connectors (HS/LS)

Arduino Shield Connector


LS Connector

Intel®
MAX® 10
FPGA
10M04 Raspberry Pi Connector

Grove
Grove
Grove
Grove
Grove
Grove

FPGA Mezzanine for 96Boards Block Diagram

50
Intel Board with Arduino, Grove and Raspberry Pi Connectors

Benefits of the FPGA Mezzanine for 96Boards Applications


The board offers ultimate flexibility by enabling connectivity between 96Boards >> 96Boards makers community
and Raspberry Pi, Arduino & Grove. Sensors, data converters, actuators and other >> Hardware engineers and FPGA
capabilities can be easily tested using boards from Analog Devices and 3rd parties. designers for evaluation, prototyping,
All expansion connectors are directly connected to the FPGA and can be controlled by and usage in final product
the FPGA or the CPU.

Expansion Connectors Resources


>> 1 x Raspberry Pi expansion
connector Board part #: SRT-96B-MEZ-FPGA
>> 1 x Arduino expansion
connector
>> 6 x Grove expansion
connectors: 4 digital and 2
analog

FPGA Mezzanine for 96Boards

Featured Arduino Shield from Analog Devices

Fully Isolated Conductivity Measurement Data Acquisition System.

Part#: EVAL-CN0349-PMDZ

All Analog Devices Arduino Shield boards are compatible with the development platform. NovTech’s
96Boards can be used as the FPGA base-board. Select Analog Devices’ Arduino boards are featured in the
Arduino section of this guide.
→ Contact Arrow for other board options

Table of
Contents arrow.com | 1 855 326 4757 51
Trenz Electronic develops, manufactures, integrates and distributes FPGA and SoC modules for
enterprises and research. The focus is on application-specific HDL and FPGA design as well as
on hardware and software development. Trenz Electronic is an approved Analog Devices Alliances
Member.

Intel® MAX® 10 FPGA: AnalogMAX Board


Board Overview
AnalogMAX is part of the ultra low-cost MAX1000 series of and a photodiode. For wider detection areas, integrated drivers
boards from Trenz Electronic. It is a full featured smoke detector of the ADPD188BI can supply external LEDs and additional
sensor board based on the Intel MAX 10 FPGA and ADI’s sensor inputs are available. The data output and functional
brand-new smoke detector part, the ADPD188BI. The module configuration occur over a 1.8 V I2C or SPI interface.
integrates a highly efficient photometric front end, two LEDs,

Intel® MAX® 10
Micro USB Arrow USB
connector Programmer2
10M08SAU169C8G LEDs 8×

ADC Flash
SDRAM 64MBit Push button 2×
PLL Internal RAM
Power supply
32Bit uController Niosll MKR header
MEMS Oscillator
SPI/I2C GPIO
Optional ADI Pmod
Secure Flash 64MBit Pmod header
LVDS IF SDRAM IF Expansion boards
Interfaces...
Sensors...
ADC/DAC...
Smoke Detector: 8-Channel ADC/DAC/GPIO Extender:
ADPD188BI AD5592R

Silicon Oscillator: 3-Axis Acceleration Sensor:


LTC1799 ADXL362

Temprature Sensor:
ADT7320

AnalogMAX Block Diagram

On-Board Analog Devices Sensors

Micropower, 3-Axis, Integrated Optical Module ±0.25°C Accurate, 16-Bit


±2 g/±4 g/±8 g Digital for Smoke Detection Digital SPI Temperature
Output MEMS Acceleromter Sensor
ADXL362 ADPD188BI ADT7320

52
Intel Board with a Pmod Connector

The board features a Pmod connector, enabling interoperability with a Applications


wide-ecosystem of daughter cards.
>> Sensor-nodes
>> Commercial
>> Industrial
>> Test and measurement
>> IoT maker

Resources
Board part #:
AnalogMAX Board MAX1000 Board • AnalogMAX-01
• MAX1000

Featured Pmod Board from Analog Devices

Low Noise, Single-Supply, Toxic Gas Detector, Using an


Electrochemical Sensor with Programmable Gain TIA for Rapid
Prototyping.

Part #: EVAL-CN0357-PMDZ

All Analog Devices Pmod Connector boards for converters and RF transceivers are compatible with the
development platform. Select Analog Devices’ Pmod boards are featured in the Pmod section of this guide.

→ Contact Arrow for other board options

Table of
Contents arrow.com | 1 855 326 4757 53
Intel Board with an Arduino Connector

Alorium Technology provides FPGA-based embedded computing platforms for advanced makers,
embedded systems, and the Industrial IoT. Alorium offers products and solutions that help users
rapidly create a strong initial prototype and support final production integration.

XLR8: Arduino Compatible FPGA Development Board


Kit Overview Applications
Alorium’s XLR8 integrates an AVR-compatible microcontroller in the on-board >> Advanced makers
Intel® MAX® 10 FPGA that is fully compatible with the Arduino IDE. In addition, XLR8 >> Embedded systems
provides a catalog of pre-programmed hardware Xcelerator Blocks (XBs) available >> Industrial IoT
through the Arduino IDE such as servo control, floating point math and quadrature.
Also available in a more compact, ready for integration footprint is the Snō FPGA
System on Module (SOM). Snō offers the enhanced performance features of XLR8
and is based on an FPGA with 2X the programmable logic providing even more space
for custom hardware functionality.
Resources
Board part #: XLR8R22M08V5U0DI

XLR8™ Development Kit

Featured Arduino Shields from Analog Devices

Ultralow Power Light Recognition System Soil Moisture and pH Measurement System
for Smart Agriculture with Temperature Compensation

Part #: EVAL-CN0397-ARDZ N Part #: EVAL-CN0398-ARDZ

All Analog Devices Arduino Shields are fully compatible with the XLR8 development board. The Snō board
supports 3.3V accessories only. Select Analog Devices’ Arduino boards are featured in the Arduino section
of this guide.
→ Contact Arrow for other board options

54
Analog Devices Boards with
the FMC Connector
Electro-mechanical expansion interface for a
daughter card to an FPGA baseboard or other device
with re-configurable I/0 capability

Picture source: Samtec

Table of
Contents arrow.com | 1 855 326 4757 55
FMC Connector: Facilitating the JESD204 Interface
The JESD204B interface is the protocol of choice for To simplify JESD204 implementation, both Analog Devices and
communication between FPGAs and high-speed analog Intel offer software IP that can easily be programmed into the
components (data converters, RF ICs, etc.). It supports speeds FPGA. Intel’s JESD IP supports the entire JESD204 standard.
greater than 10 MSPS, and simplifies board layout by minimizing The Analog Devices JESD software framework mirrors the subset
pin-outs. The standard is well suited for high-performance of the IP that is in the converters and also delivers information
systems and applications requiring multiple ADC channels to be to support clocking. It is optimized for ADI data converters
synchronized (ex: RADAR, base stations, mobile backhauls, etc.). resulting in half the size and power compared to the full JESD204
The FMC connector acts as the physical layer for the JESD204 implementation.
interface, and is used to connect an FPGA board with it’s analog
counterparts.

FPGA

1 Link, L Lanes
JESD204B TX M Converters
IP Core
SYNC_N
Multi-Device
Synchronization
through Subclass 1
or Subclass 2
JESD204B TX 1 Link, L Lanes
IP Core M Converters
SYNC_N

Logic Devices (TX) DAC Device


Devices Clock 2 Clock 1

JESD204B RX 1 Link, L Lanes


IP Core M Converters
SYNC_N
Multi-Device
Synchronization
through Subclass 1
or Subclass 2
JESD204B RX 1 Link, L Lanes
IP Core M Converters
SYNC_N

Logic Devices (RX) ADC Device


Devices Clock 2 Clock 1

Typical System Application for JESD204B IP Core

56
Analog Devices Boards with the FMC Connector

Analog Devices JESD204B Interface Framework


Integrated JESD204B software framework for rapid system-level development and optimization
Analog Devices is an original participating member of the JESD204B standards committee and has developed compliant technology
and tools along with a comprehensive product roadmap offering. By providing customers with products that combine cutting edge data
converter and transceiver technologies along with the JESD204B interface, customers can solve system design problems, while taking
advantage of this interfacing standard.

Analog Devices’ JESD204B Interface Framework is a system-level software and HDL package targeted at simplifying system
development by providing a performance optimized IP framework that integrates complex hardware such as high speed converters,
transceivers and clocks with various FPGA platforms. This framework provides an open platform that includes dynamic configuration
capabilities to allow for system changes during operation and constraint handling to support built-in component models such as clocks
and converters. These capabilities improve system-level integration and proof-of-concept testing leading to faster time-to-market.

Part # for the ADI JESD204 Interface Framework: AD-IP-JESD204

https://wiki.analog.com/resources/fpga/peripherals/jesd204

Intel JESD204B IP JESD204C and


The JESD204B Intel IP is a high-speed point-to-point serial interface for
data converters and RF transceivers to transfer data to FPGA devices. FMC+ Standards
The JESD204B IP protocol offers higher bandwidth, low I/O count Higher performance and converter bandwidth
and supports scalability in both number of lanes and data rates. The requirements are driving the transition to the new
unidirectional serial interface runs at a maximum data rate of 16.0 Gbps. JESD204C protocol and the FMC+ connector
standards. These next generation connector and
The JESD204B Intel IP addresses multi-device synchronization by protocol standards are backward compatible and offer
introducing Subclass 1 and Subclass 2 to achieve deterministic latency. over 25Gbps links with support up to 32 lanes.
The Intel JESD IP supports Intel Stratix  10, Intel Arria  10, Intel
® ® ® ® ®

Analog Devices, Intel and our partners are actively


Cyclone® 10, Stratix® V, Arria® V, and Cyclone® V FPGAs. Evaluation
rolling out new products to support these technologies
version available, and license key is not required in the evaluation mode.
and JESD204C options that use FMC/FMC+
connectors will be widely available soon. Work with
https://www.altera.com/jesd204b Arrow to learn more about Analog Devices and Intel
JESD204C support and FMC+ products.

Table of
Contents arrow.com | 1 855 326 4757 57
FMC Connector
The Preferred Physical Interface for JESD204B/C
FPGA Mezzanine Card (FMC) is an ANSI/VITA (VMEbus lanes of JESD204B data rates of 12.5 Gbps. The FMC connector
International Trade Association) 57.1 standard that defines makes evaluation of analog performance metrics easy by
I/O mezzanine modules with connection to an FPGA or other enabling a plug-and-play scheme between the FPGA evaluation
device with re-configurable I/O capability. The bandwidth of the kit and analog interface boards.
connector is sufficient to handle up to 10 receive and 10 transmit

Example of VITA 57.1 FMC (HPC) 400 I/O connectors

58
Analog Devices Boards with the FMC Connector

Interoperability Testing between Intel and Analog Devices Converters and RF


Transceivers
All ADI devices with the JESD204B interface will work with Intel. integration with the Intel ecosystem and tools with HDL interface
Specific parts were selected for interoperability testing to cover code, device drivers and reference designs.
range of portfolios. Efforts are ongoing to ensure seamless

FPGA Family Tested Interoperability Product Description


AD6676 Family (AN-753)
Wideband IF Receiver Subsystem
Analog Devices board tested: AD6676 EVM
AD9680 (AN-710) 14-Bit, 1.25 GSPS/1 GSPS/820 MSPS/500 MSPS JESD204B, Dual
Analog Devices board tested: D9680 EVM ADC
AD9691 (AN-779)
14-Bit, 1.25 GSPS JESD204B, Dual ADC
Analog Devices board tested: AD9691 EVM
AD9208 (AN-810)
Intel® Arria® 10 14-Bit, 3GSPS, JESD204B, Dual ADC
Analog Devices board tested: AD9208 EVM
AD9144 (AN-749)
Quad, 16-Bit, 2.8 GSPS, TxDAC+® DAC
Analog Devices board tested: AD9144-FMC-EBZ
AD9162 (AN-785)
16-Bit, 12 GSPS, RF DAC
Analog Devices board tested: AD9162-FMCC-EBZ
AD9371 (AN-792)
Integrated, Dual RF Transceiver with Observation Path
Analog Devices board tested: AD9371-PCBZ EVM
AD9625 Family (AN-823)
12-Bit, 2.6 GSPS/2.5 GSPS/2.0 GSPS, 1.3 V/2.5 V ADC
Analog Devices board tested: AD9625 EVM
Intel Stratix 10
® ®
AD9208 (AN-832)
14-Bit, 3GSPS, JESD204B, Dual ADC
Analog Devices board tested: AD9208 EVM
AD9625 Family (AN-712)
12-Bit, 2.6 GSPS/2.5 GSPS/2.0 GSPS, 1.3 V/2.5 V ADC
Analog Devices board tested: AD9625 EVM
Stratix® V
AD9680 (AN-710) 14-Bit, 1.25 GSPS/1 GSPS/820 MSPS/500 MSPS JESD204B, Dual
Analog Devices board tested: AD9680 EVM ADC
AD9250 Family (AN-JESD204B-AV)
Arria® V Analog Devices board tested: AD9250 EVM 14-Bit, 170 MSPS/250 MSPS, JESD204B, Dual ADC
(AD9250-FMC-250EBZ)

* AN: Refers to Intel and Analog Devices Application Note

All ADI devices with the JESD204B interface will work with
Intel. Specific parts were selected for interoperability testing to
cover a wide range of portfolios. Boards supporting FMC+ and
JESD204C are currently in development.

Table of
Contents arrow.com | 1 855 326 4757 59
Select boards from Analog Devices with FMC Connectors
ADI Device Description Board Name
AD7768: 8-channel, 24-bit, 256 kSPS simultaneous sampling ADC ▶▶ EVAL-AD7768FMCZ (Page 65)

AD7768-1: 24-bit, 256 kSPS ADC EV-AD7768-1FMCZ

AD7691: 18-bit, 1.5 LSB INL, 250 kSPS PulSAR® differential ADC in MSOP/QFN EVAL-AD7691SDZ

AD7770: 8-channel, 24-bit simultaneous sampling ADC EVAL-AD7770FMCZ

AD4020: 20-bit, 1.8 MSPS, precision SAR, differential ADC EVAL-AD4020FMCZ

AD4002: 18-bit, 2 MSPS precision pseudo differential SAR ADC EVAL-AD4002FMCZ


Analog-to-Digital
AD4003: 18-bit, 2 MSPS precision, differential SAR ADC ▶▶ EVAL-AD4003FMCZ (Page 64)
(ADC) Boards with
FMC Connector AD4000: 16-bit, 2 MSPS precision pseudo differential SAR ADC EVAL-AD4000FMCZ
AD7626: 16-bit, 10 MSPS, PulSAR differential ADC EVAL-AD7626FMCZ
AD7625: 16-bit, 6MSPS PulSAR differential ADC EVAL-AD7625FMCZ

AD9208-3000: 14-bit, 3GSPS dual ADC ▶▶ AD9208-3000EBZ (Page 62)

AD9680: Dual, 14-bit, 1.25 GSPS, JESD204B ADC ▶▶ AD-FMCDAQ2-EBZ (Page 63)

AD9250: 14-bit, 170 MSPS/250 MSPS, dual ADC AD-FMCJESDADC1-EBZ

AD9625: 12-bit, 2.5 GSPS monolithic sampling ADC AD-FMCADC2-EBZ

AD9172, 16-bit, 12.6 GSPS dual DAC ▶▶ AD9172-FMC-EBZ (Page 68)


Digital-to-Analog
AD9174, 16-bit, 12.6 GSPS RF DAC ▶▶ AD9174-FMC-EBZ (Page 66)
(DAC) Boards with
AD9162, 16-bit, 12 GSPS RF DAC ▶▶ AD9162-FMCB-EBZ (Page 69)
FMC Connector
AD9164, 16-bit, 12 GSPS, RF DAC, and direct digital synthesizer ▶▶ AD9164-FMCB-EBZ (Page 67)
AD9371: 300 MHz to 6000 MHz integrated, dual RF transceivers with observation
▶▶ ADRV9371-W/PCBZ (Page 71)
path
AD9361: 70 MHz to 6.0 GHz high-performance, RF Transceiver with a channel
AD-FMCOMMS2-EBZ
bandwidth of <200 kHz to 56 MHz
AD9361: 70 MHz to 6.0 GHz high-performance, RF Transceiver with a channel
AD-FMCOMMS3-EBZ
Transceiver Boards bandwidth of <200 kHz to 56 MHz
with FMC Connector AD9364: 70 MHz to 6.0 GHz 1 x 1 channel high transceiver with integrated 12-bit
AD-FMCOMMS4-EBZ
DACs and ADCs
AD9652: 400MHz to 4.4GHz receiver with 16-bit dual ADCs, 310 MSPS AD-FMCOMMS6-EBZ

AD9375: 300MHz – 6GHz, highly integrated, wideband RF transceiver ADRV9375-W/PCBZ

ADRV9009: 75 MHz to 6GHz integrated dual RF transceivers ▶▶ ADRV9009-W/PCBZ (Page 70)

▶ Featured in this guide

60
Picture source: Samtec

List of FPGA boards with FMC Connectors


Board Name Brief Description Category Partner
▶▶ MitySOM-A10S Development Kit Includes the MitySOM-A10S SOM and a baseboard. Design
SOM Critical Link
(Page 63) files provided
Intel Arria 10 SOM (with 160 to 480K LEs) in a 29x29
▶▶ Dream Chip Arria 10 SOM and
mm package. Ideal for vision applications and industrial SOM, Development kit Dream Chip
Evaluation Baseboard (Page 34)
automation
Based on the Intel® Arria® 10 SX and GX families. Supports
▶▶ iW-RainboW-G24M (Page 32) SOM, Development kit iWave Systems
up to 660K LE devices
▶▶ Achilles Instant-Development Kit SOM and development kit based on Intel Arria 10 SX
Development kit REFLEX CES
Arria 10 SoC SOM (Page 36) (10AS066H2F34I1SG) device up to 660K LEs
▶▶ Sargon Instant-Development Kit
Development kit based on Intel® Stratix® 10 GX FPGAs SX
Stratix 10 FPGA FMC+ IDK Development kit REFLEX CES
with 2800K LEs
(Page 46)
C10GFP Intel® Cyclone® 10 GX FPGA Development Kit COTS, Development kit Terasic
Kit features a 10AX115S2F45I1SG device and a one-year
A10GFP Development kit Terasic
license for the Intel® Quartus® Prime design software
Dev kit based on Cyclone® V SE 5CSEBA6U23I7 device
▶▶ DE10-Nano Kit (Page 26) Development kit Terasic
(110K LEs)
▶ Featured in this guide

Table of
Contents arrow.com | 1 855 326 4757 61
14-Bit, 3GSPS Dual ADC Evaluation Board: AD9208
The AD9208-3000EBZ supports the AD9208-3000, a 14-bit, 3GSPS dual ADC. This device is designed support direct RF sampling
analog signals of up to 5 GHz. The 3 dB bandwidth of the ADC input is greater than 9 GHz. The AD9208 is optimized for wide input
bandwidth, high sampling rate, excellent linearity, and low power in a small package.

Suggested FPGA Board


• Interoperability verified with
the Intel® Stratix® 10 GX
H-Tile FPGA Development
Kit

Part #: AD9208-3000EBZ

Features Applications
• JESD204B coded serial digital outputs with support for lane rates up to 16 Gbps/lane • Aerospace and Defense: Electronic
• Wide full power bandwidth supports IF sampling of signals up to 9GHz (-3dB point) surveillance and countermeasures,

• Four Integrated wide-band decimation filter and NCO blocks supporting multi-band radar
receivers • Communications: Wideband RF signal
• Fast NCO switching enabled through GPIO pins processing, wireless infrastructure

• Instrumentation and Measurement: RF


signal analyzers and vector network
analyzers
Reference Documentation
• Arria 10 GX interoperability report
• Statix 10 interoperability report

62
Analog Devices Boards with the FMC Connector

Dual, 14-Bit, 1.25 GSPS, JESD204B ADC: AD9680


The AD-FMCDAQ2-EBZ module is comprised of the AD9680 dual, 14-bit, 1.25 GSPS, JESD204B ADC, the AD9152 dual, 16-bit,
2.25 GSPS, JESD204B DAC, the AD9528 clock, and power management components.

Suggested FPGA Board


• Interoperability verified
with the Intel® Arria® 10
Development Kit

Part #: AD-FMCDAQ2-EBZ

Features Applications
• Ultrawide signal bandwidth enables emerging wideband and multiband wireless • Electronic test and measurement
applications equipment
• Advanced low spurious and distortion design techniques provide high quality synthesis • General-purpose software radios,
of wideband signals from baseband to high intermediate frequencies radar systems
• JESD204B Subclass 1 support simplifies multichip synchronization in software and • Ultra-wideband satellite receivers
hardware design
• Signals intelligence (SIGINT)
• Fewer pins for data interface width with the serializer/deserializer (SERDES)
• Point to point communication
JESD204B four-lane interface
systems, Multiple input/multiple
output (MIMO) radios

Reference Documentation • DOCSIS 3.0 CMTS and HFC


networks
• AN-710: JESD204B IP Core and ADI AD9680 Hardware Checkout Report

Table of
Contents arrow.com | 1 855 326 4757 63
18-Bit, Precision SAR ADC with 2 MSPS Throughput:
AD4003
The AD4003 is a low noise, low power, high speed, 18-bit, precision successive approximation register (SAR) ADCs with 2 MSPS
throughput. It has ease of use features that reduce signal chain power consumption, reduce signal chain complexity, and enable higher
channel density. The evaluation board features a Low Pin Count (LPC) FMC connector.

Suggested FPGA Board


• Intel® Cyclone® 10 GX:
FPGA Development Kit

Part #: EVAL-AD4003FMCZ

Features
Applications
• NL: ±1.0 LSB (±3.8 ppm) maximum
• Automatic test equipment
• Guaranteed 18-bit no missing codes
• 9.5 mW at 2 MSPS, 4.9 mW at 1 MSPS, 2.4 mW at 500 kSPS (VDD only) • Machine automation

• SNR: 100.5 dB typical at 1 kHz, VREF = 5 V; 99 dB typical at 100 kHz • Medical equipment

• THD: −123 dB typical at 1 kHz, VREF = 5 V; −100 dB typical at 100 kHz • Battery-powered equipment
• Differential analog input range: ±VREF (0 V to VREF with VREF from 2.4 V to 5.1 V) • Precision data acquisition systems

64
Analog Devices Boards with the FMC Connector

24-Bit, 8-Channel, 256 kSPS, Sigma-Delta ADC:


AD7768
Evaluation Board for the AD7768 24-Bit, 8-Channel, Simultaneous Sampling, 256 kSPS, Sigma-Delta ADC with Power Scaling. User
PC software executable controls the AD7768 over a USB cable through the FPGA board. The evaluation board features a Low Pin
Count (LPC) FMC connector.

Suggested FPGA Board


• Intel Cyclone 10 GX: FPGA
Development Kit

Part #: EVAL-AD7768FMCZ

Applications
Features • Data acquisition systems: USB/
PXI/Ethernet
• 108 dB dynamic range
• Instrumentation and industrial
• 10.8 kHz maximum input bandwidth (−3 dB bandwidth) control loops
• −120 dB total harmonic distortion (THD) typical • Audio test and measurement
• ±2 ppm of full-scale range (FSR) integral nonlinearity (INL), ±50 μV offset error, ±30 • Vibration and asset condition
ppm gain error monitoring
• Optimized power dissipation vs. noise vs. input bandwidth • 3-phase power quality analysis
• Selectable power, speed, and input bandwidth (BW) modes • Sonar
• Input BW range: dc to 110.8 kHz • High precision medical
• Programmable input bandwidth/sampling rates >> Electroencephalogram (EEG)
>> Electromyography (EMG)
>> Electrocardiogram (ECG)

Table of
Contents arrow.com | 1 855 326 4757 65
Dual 16-bit, 12.6GSPS RF DAC and Direct Digital
Synthesizer: AD9174
The AD9174 is a high performance, dual, 16-bit digital-to-analog converter (DAC) and direct digital synthesizer (DDS) that supports
DAC sample rates up to 12.6GSPS. The device features an 8-lane, 15Gbps JESD204B data input port, a high-performance, on-
chip DAC clock multiplier, three complex data input channelizers per DAC, and digital signal processing capabilities. The DDS engine
consists of a bank of 32,32-bit numerically controlled oscillators (NCO’s), each with its own phase accumulator. The low-power, high
dynamic range, wide bandwidth, low single-side band (SSB) phase-noise performance combined with digital signal processing makes
these DAC’s ideally suited for the most demanding software defined RF synthesis applications.

Suggested FPGA Board


• MitySOM-A10S
Development Kit

Part #: AD9174-FMC-EBZ

Features Applications
• Direct-to-RF synthesis up to 6GHz • Single/Multi-Band Wireless
Communications
>> Eliminates analog IF-to-RF conversion stage and LO generation lowering overall
system power consumption • Instrumentation, Automatic Test
Equipment (ATE)
>> Doubles complex signal bandwidth through channelizer data path to 2.4GHz
• Radar and Jammers
>> Supports up to 3.2GHz maximum complex signal bandwidth through main DAC
data path
• Common transmit platform for flexible and reliable RF synthesis
>> Channelizer data input architecture lowers data interface speed requirement
and power consumption
>> Independent NCO and digital gain control per input channel enable flexible
signal chain partitioning in single and multi-band
>> DDS provides phase-coherent, Fast Frequency Hoping engine to support a
wide array of signal generation applications

66
Analog Devices Boards with the FMC Connector

6 GSPS, 16-Bit DAC and Direct Digital Synthesizer


(DDS): AD9164
The AD9164 is a high performance, 16-bit DAC and direct digital synthesizer (DDS) that supports update rates to 6 GSPS. The DAC
core is based on a quad-switch architecture coupled with a 2× interpolator filter that enables an effective DAC update rate of up to 12
GSPS in some modes. The high dynamic range and bandwidth makes these DACs ideally suited for the most demanding high-speed
radio frequency (RF) DAC applications.

Suggested FPGA Board


• Intel® Arria® 10 GX
Development Kit

Part #: AD9164-FMCB-EBZ

Features Applications
• High dynamic range and signal reconstruction bandwidth supports RF signal synthesis • Aerospace and Defense: Phased
of up to 7.5 GHz array, missiles and precision
munitions, electronic surveillance
• Up to eight lanes JESD204B SERDES interface flexible in terms of number of lanes and countermeasures, radar
and lane speed
• Instrumentation and Measurement:
• Bandwidth and dynamic range to meet DOCSIS 3.1 compliance and multiband Instrumenting 5G, communications
wireless communications standards with margin test equipment, signal generators
(Audio through RF)

Reference Documentation
AN-785: Arria 10 GX interoperability report

Table of
Contents arrow.com | 1 855 326 4757 67
Dual 16-Bit DAC, Up to 12.6 GSPS Sample Rates:
AD9172
The AD9172 is a high performance, dual, 16-bit DAC that supports sample rates up to 12.6 GSPS. The device features an 8-lane, 15
Gbps JESD204B data input port, a high performance, on-chip DAC clock multiplier, and digital signal processing capabilities targeted
at single-band and multiband direct to radio frequency (RF) wireless applications.

Suggested FPGA Board


• MitySOM-A10S
Development Kit

Part #: AD9172-FMC-EBZ

Features Applications
• 3 bypassable, complex data input channels per RF DAC • Instrumentation & Measurement:
• 1.54 GSPS maximum complex input data rate per input channel Communications test equipment,
• 1 independent NCO per input channel electronic test & measurement
• Flexible 8-lane, 15.4 Gbps JESD204B interface • Communications: Wireless
• Proprietary, low spurious and distortion design infrastructure, wideband RF signal
processing

• Aerospace and Defense: Electronic


surveillance and countermeasures,
milcom, radar, phased array,
unmanned systems

• Automotive: Automotive RADAR

68
Analog Devices Boards with the FMC Connector

16-Bit DAC, Data Rates Up To 6 GSPS: AD9162


The AD9162 is a high performance, 16-bit DAC that supports data rates to 6 GSPS. The DAC core is based on a quad-switch
architecture coupled with a 2× interpolator filter that enables an effective DAC update rate of up to 12 GSPS in some modes. The
high dynamic range and bandwidth makes these DACs ideally suited for the most demanding high-speed radio frequency (RF) DAC
applications.

Suggested FPGA Board


• Intel® Arria® 10 GX
Development Kit

Part #: AD9162-FMCB-EBZ

Features Applications
• High dynamic range and signal reconstruction bandwidth supports RF signal synthesis • Instrumentation, automatic test
of up to 7.5 GHz
equipment (ATE)
• Up to eight lanes JESD204B SERDES interface flexible in terms of number of lanes
and lane speed • Radars and jammers

• Broadband Communications Systems:


• Bandwidth and dynamic range to meet DOCSIS 3.1 compliance with margin
DOCSIS 3.1 cable modem termination
system (CMTS)/video on demand
(VOD)/edge quadrature amplitude
Reference Documentation
modulation (EQAM)
AN-785: Arria 10 GX interoperability report
• Wireless communications
infrastructure: W-CDMA, LTE, LTE-A,
point to point

Table of
Contents arrow.com | 1 855 326 4757 69
75 MHz to 6000 MHz RF Transceiver: ADRV9009
The ADRV9009-W/PCBZ is a radio card designed to showcase the ADRV9009, the widest bandwidth, highest performance RF
integrated transceiver. The radio card provides a single 2x2 transceiver platform for device evaluation and rapid prototyping of radio
solutions.

Suggested FPGA Board


• Achilles Instant-Development
Kit

Part #: ADRV9009-W/PCBZ

Features
• Dual receivers and dual transmitters
Applications
• Dual input shared observation receiver
• Instrumentation & measurement
• Maximum receiver bandwidth: 200 MHz
• Aerospace and defense
• Maximum tunable transmitter synthesis bandwidth: 450 MHz
• Communications
• Maximum observation receiver bandwidth: 450 MHz
• Fully integrated fractional-N RF and clock synthesizers • RadioVerse: Concept to creation at
lightspeed
• Multichip phase synchronization for RF LO and baseband clocks
• JESD204B datapath interface
• Tunable range: 75 MHz to 6000 MHz

70
Analog Devices Boards with the FMC Connector

300 MHz to 6000 MHz RF Transceiver: AD9371


ADRV9371-WPCBZ is a radio card designed to showcase the AD9371, a high performance wideband integrated RF transceiver
intended for use in RF applications such as test and measurement applications and software defined radios. The radio card provides a
single 2x2 transceiver platform for device evaluation and rapid prototyping of radio solutions.

Suggested FPGA Board


• Achilles Instant-Development
Kit

Part #: ADRV9371-W/PCBZ

Features
• Dual differential transmitters (Tx) and receivers (Rx)
• Observation receiver (ORx) with 2 inputs
Applications
• Sniffer receiver (SnRx) with 3 inputs • Aerospace and Defense: Radar,
• Tunable range: 300 MHz to 6000 MHz milcom, electronic surveillance
and countermeasures, unmanned
• Tx synthesis bandwidth (BW) to 250 MHz systems
• Rx BW: 8 MHz to 100 MHz • RadioVerse: Concept to creation
• Supports frequency division duplex (FDD) and time division duplex (TDD) operation at lightspeed

• Fully integrated independent fractional-N radio frequency (RF) synthesizers for Tx, Rx,
ORx, and clock generation
• JESD204B digital interface

Reference Documentation
• Reference HDL for Arria 10 GX
• Reference HDL for Arria 10 SoC
• AN-792: Intel® FPGA JESD204B IP Core and ADI AD9371 Hardware Checkout Report

Table of
Contents arrow.com | 1 855 326 4757 71
Resources and References for FMC-based Boards

Interoperability reports:
• AN-753: JESD204B IP Core and ADI AD6676 Hardware Checkout Report
• AN-710: JESD204B MegaCore Function and ADI AD9680 Hardware Checkout Report
• AN-779: Intel JESD204B IP Core and AD9691 Hardware Checkout Report
• AN-810: Intel JESD204B IP Core and ADI AD9208 Hardware Checkout Report AN-749
• AN-785: JESD204B IP Core and ADI AD9144 Hardware Checkout Report
• AN-792: JESD204B IP Core and ADI AD9162 Hardware Checkout Report
• AN-823: Intel JESD204B IP Core and ADI AD9625 Hardware Checkout Report for Intel Stratix 10 Devices
• AN-832: Intel JESD204B IP Core and ADI AD9208 Hardware Checkout Report for Intel Stratix 10 Devices
• AN-712: JESD204B MegaCore Function and ADI AD9625 Hardware Checkout Report
• AN-710: JESD204B IP Core and ADI AD9680 Hardware Checkout Report
• JESD204B IP Core and ADI AD9250 Hardware Checkout Report

Intel JESD204B IP Resources:


• Intel JESD204B IP User Guide
• JESD204B IP Design Examples User Guide
• AN803: Implementing ADC-Intel® Arria® 10 Multi-Link Design with JESD204B RX IP Core
• AN804: Implementing ADC-Intel® Stratix® 10 Multi-Link Design with JESD204B RX IP Core
• Implementing JESD204B IP Core System Reference Design with Nios® II Processor as Control Unit 
• Using the JESD204B Intel IP Function in Arria® V Devices

Analog Devices JESD204 Resources


• JESD204 Interface Framework: Integrated JESD204 software framework for rapid system-level development
and optimization
• JESD204B Survival Guide: Practical JESD204B Technical Information, Tips, and Advice from the World’s Data
Converter Market Share Leader
• JESD204 Serial Interface and JEDEC Standard Data Converters
• Wiki: JESD204 Interface Framework

72
Analog Devices Arduino
Shields
Enable sensing, signal conditioning, and
even complete sub-systems for FPGA design
prototyping.

Table of
Contents arrow.com | 1 855 326 4757 73
Arduino Introduction
Arduino is an open-source electronics platform based on Analog Devices Arduino shields to prototype various capabilities.
low-cost and easy-to-use hardware and software. With the With open hardware modules and software examples, Analog
open hardware concept, add on capabilities for sensors, data Devices enables proof-of-concept testing and customization
converters, and even complete sub-systems are easily enabled. options for application specific requirements around the signal
FPGA boards with the Arduino connector can plug into any chain.

Computer Cloud

SDA
SCL
AREF
GND
13
IOREF 12
Reset 11
FPGA Board with 3.3V 10
Arduino Connector 5V
POWER

9
GND 8
GND
DIGITAL
Vin 7
6
A0 5
ANALOG IN

A1 4
A2 3
RESET
MISO

A3 2
SCK

A4 1
A5 0
Add On Sensors Add On Signal
Conditioners
VCC
MOSI
GND

Add On Sub-
systems and
applications
Arduino Pinout

For more details, go to Introduction to the Arduino Board website

74
Analog Devices Arduino Shields

Select List of Arduino-Compatible “Circuits from the


Lab” Shields
Board Part # Description ADI Part Number
▶▶ EVAL-CN0357-ARDZ AD5270, AD7790, AD8500, ADA4528-2,
Electrochemical gas detection circuit (CN0357)
(Page 78) ADR3412
▶▶ EVAL-CN0216-ARDZ
High gain weigh scale design (CN0216) CN0216
(Page 78)
Single supply, multi-channel thermocouple temperature meter
EVAL-CN0391-ARDZ with an 8-channel, low noise, low power, 24-bit, Sigma-Delta AD7124-8, ADP7118
ADC
Single supply, multi channel thermocouple temperature meter
EVAL-CN0394-ARDZ with a low-power precision analog microcontroller, Arm Cortex ADUCM360
M3 with dual Sigma-Delta ADCs
AD8629, ADA4528-1, ADP7105, ADUCM360,
EVAL-CN0338-ARDZ NDIR thermopile-based gas sensing circuit
ADuCM362, ADuCM363
▶▶ EVAL-CN0397-ARDZ
Ultralow power light recognition system for smart agriculture AD7798, AD8500, AD8502, ADR3433
(Page 79)
▶▶ EVAL-CN0398-ARDZ Soil moisture and pH measurement system with temperature
AD7124-8, ADR3433, ADA4661-2, ADP7118
(Page 79) compensation
Dual electrochemical gas sensor with temperature AD7798, ADA4528-1, ADA4528-2, AD5270,
EVAL-CN0396-ARDZ
compensation ADT7310, ADP7102, ADR3412
Volatile organic compound detector for indoor air quality AD7988-1, ADN8810, AD8628, ADG884,
EVAL-CN0395-ARDZ
measurement ADG758, ADP196, ADP124, ADR4540

EVAL-CN0409-ARDZ Water turbidity measurement ADPD105, ADP7105A, ADG3301B

AD5686A, ADA4500-2, ADR4520, LTC6820,


EVAL-CN0410-ARDZ 3-channel programmable LED driver board
ADP7112

▶ Featured in this guide

“Circuits from the Lab” reference designs provide solutions for standalone applications or
a starting point to build complex sub-systems. They are built and tested by Analog Devices,
and include complete design and integration files.

Table of
Contents arrow.com | 1 855 326 4757 75
Select List of Arduino Shields for Sensors, Data Converters and
Interface Products
Board Part # Description ADI Part Number
▶▶ EVAL-ADXL362-ARDZ
Arduino Sheilds for Ultra-low power accelerometer with display Arduino Shield ADXL362
(Page 77)
Sensors
EVAL-ADXL372-ARDZ Micropower, 3-Axis +/-200g digital output MEMS Arduino Shield ADXL372

16-bit dual rail-to-rail DACs with I2C interface and 1-/2-channel


DC2026C-KIT DC2026C
20-bit μPower no-latency Delta Sigma ADC
Arduino Sheilds for
Data Linduino One isolated USB demo board, Arduino and
DC2026C DC2026C
Converters QuikEval-compatible code development platform

DC2459A-A Demo kit for 16-bit, 50 MSPS current output DAC DC2459A-A

isoSPI and isolated CAN interface implementation on a single


▶▶ DC2617A (Page 77) DC2617A
Arduino Shields for Arduino Shield
Interface Single bus RS232/RS485 multiprotocol transceiver with
DC2364A DC2364A
integrated termination

▶ Featured in this guide

76
Analog Devices Arduino Shields

Ultralow Power, 3-Axis MEMS Accelerometer: ADXL362


The AD9172 is a high performance, dual, 16-bit DAC that supports sample rates up to 12.6 GSPS. The device features an 8-lane,
15 Gbps JESD204B data input port, a high performance, on-chip DAC clock multiplier, and digital signal processing capabilities
targeted at single-band and multiband direct to radio frequency (RF) wireless applications.

Applications
• Hearing aids

• Home healthcare devices

• Motion enabled power save switches

• Wireless sensors

• Motion enabled metering devices

• Class III medical implantable


Part #: EVAL-ADXL362-ARDZ

soSPI/Isolated CAN Arduino Shield: DC2617A


Demonstration circuit 2617A implements the isoSPI and isolated CAN interface hardware on a single Arduino shield. It allows Arduino-
compatible controller boards to communicate with isoSPI and/or CAN bus networks. DC2617A is compatible with both 5V or 3.3V
logic controller boards. DC2617A includes the LTC®6820 (isoSPI Isolated Communications Interface) and associated transformers to
translate between the Arduino’s SPI port and the RJ45 isoSPI connector

Applications
• Industrial networking

• Battery monitoring systems

• Remote sensors

Part #: DC2617A

Table of
Contents arrow.com | 1 855 326 4757 77
Electrochemical Gas Detection Circuit: CN0357
CN0357 single-supply, low noise, portable gas detector circuit using an electrochemical sensor. The Alphasense CO-AX carbon
monoxide sensor is used. Electrochemical sensors offer several advantages for instruments that detect or measure the concentration
of many toxic gases. Most sensors are gas specific and have usable resolutions under one part per million (ppm) of gas concentration.

ADI parts included in this circuit


Part # Description
16-Bit, Single-Channel, Ultra Low Power, Sigma Delta
AD7790
A/D Converter
Precision, Ultralow Noise, RRIO, Zero-Drift Dual Op
ADA4528-2
Amp
AD8500 Micropower Precision CMOS Operational Amplifier
1024-Position, 1% Resistor Tolerance Error, SPI
AD5270
Interface and 50-TP Memory Digital Rheostat
ADR3412 Micro-Power, High-Accuracy 1.2V Voltage Reference
Part #: EVAL-CN0357-ARDZ

High Gain Weigh Scale Design: CN0216


Precision weigh scale design using the AD7791 24-Bit Sigma-Delta ADC with external ADA4528-1 zero-drift amplifiers. This solution
allows for high dc gain with a single supply. Ultralow noise, low offset voltage, and low drift amplifiers are used at the front end for
amplification of the low-level signal from the load cell.

ADI parts included in this circuit

Part # Description
AD7791 Low Power, Buffered, 24-Bit Sigma-Delta ADC
Precision, Ultralow Noise, Rail-to-Rail Input/Output,
ADA4528-1
Zero-Drift Op Amp
High Accuracy anyCAP® 100mA Low Dropout Linear
ADP3301
Regulator

Part #: EVAL-CN0216-ARDZ

78
Analog Devices Arduino Shields

Ultralow Power Light Recognition System for Smart


Agriculture: CN0397
The circuit uses three photodiodes that are sensitive to different wavelengths (red, green, and blue), to measure light intensity levels
over the light spectrum where plants are photosynthetically active. The measured results can be used to optimize the light source to
match the requirements of the specific plants, enhance the growth rate, and minimize energy losses.

ADI parts included in this circuit


Part # Description
ADA4528-2 5.0V, Ultralow Noise, Zero Drift, RRIO, Dual Op Amp
1024-Position, 1% Resistor Tolerance Error, 50-TP
AD5270-20
Memory Digital Rheostat
ADR3412 Micropower, 0.1% Accurate, 1.2 Voltage Reference

AD8500 Micropower, RRIO, Op Amp

AD7790 Low Power, 16-Bit Sigma-Delta, ADC


Part #: EVAL-CN0397-ARDZ

Ultralow Power Light Recognition System for Smart


Agriculture: CN0398
This circuit is a single-supply, low power, high precision complete solution for soil moisture and pH measurements, including
temperature compensation. The circuit is optimized for use with capacitive soil moisture sensors that are insensitive to water salinity
and do not corrode over time. The circuit also measures soil pH and that function is suitable in a variety of applications.

ADI parts included in this circuit

Part # Description
8-Channel, Low Noise, Low Power, 24-Bit, ∑-Δ ADC
AD7124-8
with PGA and Reference
ADA4528-1 Micropower, High Accuracy Voltage Reference
18 V, Precision, 725 µA, 4 MHz, CMOS RRIO
ADA4661-2
Operational Amplifier
20 V, 200 mA, Low Noise, CMOS LDO Linear
ADP118-2.5
Regulator Part #: EVAL-CN0398-ARDZ

Table of
Contents arrow.com | 1 855 326 4757 79
FPGA Boards with the Arduino Connector
Intel part Board Name Brief Description Category Partner
Arduino-compatible development board based Alorium
▶▶ Intel® MAX® 10 XLR8 (Page 54) Development kit
on Intel MAX 10 FPGA Technology
SnōMākr is a breakout board for Alorium Alorium
Intel MAX 10 SnōMākr Development kit
Technology’s Snō FPGA Module Technology
Industry 4.0 gateway board with serial
IoTCentipede™ Development kit,
▶▶ Intel® Cyclone® connectivity for aggregation and protocol NovTech
(Page 22) pre-production board
bridging
Mezzannine card to add expansion capabilities
FPGA Mezzanine for
▶▶ Intel MAX 10 (Grove, Raspberry Pi, Arduino) to 96Boards Development kit Shiratech
96Boards (Page 50)
FPGA boards
DE10-Nano Dev kit based on Cyclone V SE
▶▶ Cyclone® V Development kit Terasic
(Page 26) 5CSEBA6U23I7 device (110K LEs)
Development kit based on Intel MAX 10
Intel MAX 10 DE10-Lite COTS, Development kit Terasic
10M50DAF484C7G Device
SOM, COTS,
▶▶ Intel Cyclone 10 LP CYC1000 (Page 10) Intel Cyclone 10 LP module with 25K LEs Trenz Electronic
Development kit
Cyclone10 LP Reference kit based on CYC1000 Intel Cyclone SOM, COTS,
▶▶ Intel Cyclone10 LP Trenz Electronic
Reference Kit (Page 12) 10 LP module with 55K LEs Development kit
FPGA IoT Maker Board based on Intel
▶▶ Intel MAX 10 MAX1000 (Page 52) SOM, Development kit Trenz Electronic
MAX 10 FPGA with 8K LEs
Smoke detector module with three sensors
▶▶ Intel MAX 10 AnalogMAX (Page 52) SOM, Development kit Trenz Electronic
and Intel MAX 10 FPGA with 8K LEs

▶ Featured in this guide

80
Analog Devices Pmod
Daughter Boards
Pmod interface connects low frequency,
low I/O pin count peripheral modules to the
FPGA board

Table of
Contents arrow.com | 1 855 326 4757 81
Pmod Introduction
Pmod interface or Peripheral Module interface is an open for prototyping or evaluation purposes with no soldering required.
standard defined by Digilent Inc for peripherals used with There are six-pin and twelve-pin versions of the interface
FPGAs or microcontrollers. Since the hardware interface is pre- defined, encompassing SPI, I²C, UART, I²S, H-bridge and GPIO
designed, modules can be quickly assembled with host boards protocols.

VCC GND 8 I/Os


4 I/Os Pin 6 Pin 1
Pin 6 VCC GND Pin 1
Pin 12

6-pin Pmod header 12-pin Pmod header

Analog Devices offers a range of Pmod peripheral modules that Intel. Reference designs and software examples complement
can extend the analog, sensor, and application capabilities of hardware offerings for quick and easy prototyping.

6-pin Pmod Connector* 12-pin Pmod Connector*

* Picture source: Digilent

82
Picture source: Digilent

Select List of “Circuits from the Lab” Boards with the Pmod
Connector
Board Part # Description ADI Part Numbers
A completely isolated low power pH sensor signal conditioner and digitizer
EVAL-CN0326-PMDZ AD7793, AD8603, ADUM5401
with automatic temperature compensation for high accuracy
Processes ±10 V input signals using a single 3.3 V supply. The total
error after room temperature calibration is less than ±0.1% FSR over a
EVAL-CN0335-PMDZ AD7091R, AD8606, ADUM5401
±10°C temperature change, making it ideal for a wide variety of industrial
measurements
Processes 4 mA to 20 mA input signals using a single 3.3 V supply. The
▶▶ EVAL-CN0336-PMDZ total error after room temperature calibration is ±0.06% FSR over a
AD7091R, AD8606, ADUM5401
(Page 86) ±10°C temperature change, making it ideal for a wide variety of industrial
measurements
Processes the output of a PT100 RTD and includes an innovative circuit for
EVAL-CN0337-PMDZ AD7091R, AD8606, ADUM5401
lead-wire compensation using a standard 3-wire connection
A relative humidity sensing circuit which can be connected up to any Pmod
EVAL-CN0346-PMDZ AD7745, AD8615
compatible host controller board
▶▶ EVAL-CN0349-PMDZ AD5934, AD8606, ADUM5000,
A fully Isolated conductivity measurement data acquisition system
(Page 86) ADUM1250, ADG715
A low power multichannel thermocouple measurement system with cold AD7787, AD8495, ADM8829,
EVAL-CN0354-PMDZ
junction compensation ADG1609, ADR3412, REF194
▶▶ EVAL-CN0355-PMDZ A low power signal conditioner for resistive bridge type sensors and includes
AD7793, AD8420, ADA4096-2
(Page 85) a temperature compensation channel
An electrochemical gas sensing signal conditioning solution, designed to
▶▶ EVAL-CN0357-PMDZ AD7790, ADA4528-2, AD8500,
work with many electrochemical gas sensors down to resolutions of 1 part
(Page 87) ADR3412, AD5270
per million (ppm)
A 4 mA-to-20 mA current loop transmitter for communication between a
EVAL-CN0179-PMDZ AD5641, AD8657, ADR02
process control system and its actuator
A precision weigh scale signal conditioning system. Ultralow noise, low offset
EVAL-CN0216-PMDZ voltage, and low drift amplifiers are used at the front end for amplification of AD7791, ADA4528-1, ADP3301
the low-level signal from the load cell

▶ Featured in this guide

Table of
Contents arrow.com | 1 855 326 4757 83
Select List of Sensors, MEMS and Data Converters Boards with the
Pmod Connector

ADI Part
Board Part # Board and ADI Part # Description
Numbers
Sensors and ▶▶ EVAL-ADT7420-
+/- 0.25 degree accurate digital temperature sensor ADT7420
MEMS Boards PMDZ (Page 85)
with the Pmod A high accuracy digital temperature sensor over a wide industrial range,
PmodTMP2 ADT7420
Connector housed in a 4 mm × 4 mm LFCSP package
EVAL-AD7942-PMDZ 14-Bit, 250 kSPS PulSAR®, pseudo differential ADC in MSOP/LFCSP AD7942

EVAL-AD7946-PMDZ 14-Bit, 500 kSPS PulSAR® ADC in MSOP AD7946

EVAL-AD7685-PMDZ 16-Bit, 250 kSPS PulSAR® ADC in MSOP/QFN AD7685

EVAL-AD7686-PMDZ 500 kSPS 16-BIT PulSAR® A/D converter in MSOP/QFN AD7686


16-Bit, 1.5 LSB INL, 250 kSPS PulSAR™ differential ADC in MSOP/
EVAL-AD7687-PMDZ AD7687
QFN
EVAL-AD7688-PMDZ 500 kSPS 16- BIT differential PulSAR® A/D converter in μSOIC/QFN AD7688
18-Bit, 1.5 LSB INL, 400 kSPS PulSAR® differential ADC in MSOP/
EVAL-AD7690-PMDZ AD7690
Data Converter QFN
Boards with the 18-Bit, 1.5 LSB INL, 250 kSPS PulSAR® differential ADC in MSOP/
EVAL-AD7691-PMDZ AD7691
Pmod Connector QFN
16-Bit, ±0.5 LSB, 500 kSPS PulSAR® differential A/D converter in
EVAL-AD7693-PMDZ AD7693
MSOP/QFN
EVAL-AD7980-PMDZ 16-Bit, 1 MSPS, PulSAR ADC in MSOP/LFCSP AD7980

EVAL-AD7982-PMDZ 18-Bit, 1 MSPS PulSAR 7 mW ADC in MSOP/LFCSP AD7982

EVAL-AD7983-PMDZ 16-Bit, 1.33 MSPS PulSAR ADC in MSOP/QFN AD7983

EVAL-AD7984-PMDZ 18-Bit, 1.33 MSPS PulSAR 10.5 mW ADC in MSOP/QFN AD7984


EVAL-AD7988-1-PMDZ 16-Bit, 100ksps, ultra-low power 16-Bit SAR ADC AD7988-1

EVAL-AD7988-5-PMDZ 16-Bit, 500ksps, ultra-low power 16 bit SAR ADC AD7988-5

▶ Featured in this guide

84
Analog Devices Pmod Daughter Boards

Low Power, Temperature Compensated Bridge Signal Conditioner and Drive:


CN0355

This reference design is a complete, low power signal conditioner for a bridge type sensor and includes a temperature compensation
channel. This circuit is ideal for a variety of industrial pressure sensors and load cells that operate with drive voltages of between 5 V
and 15 V.

ADI parts included in this circuit


Part # Description
3-Channel, Low Noise, Low Power, 24-Bit,
AD7793
Sigma-Delta ADC

AD8420 Wide Supply Range, Micropower, Rail-to-Rail In-Amp


Part #: EVAL-CN0355-PMDZ
30 V, MicroPower, Overvoltage Protection, Rail-to-Rail
ADA4096-2
Input/Output (RRIO), Dual Op Amp

+/-0.25 Degree Celsius Temperature Measurement Pmod Board:


EVAL-ADT7420-PMDZ

The Pmod compatible evaluation/prototyping board is a small form factor, low cost ambient temperature sensor measurement board.
When prototyping, this board is used in conjunction with the ADICUP360 or the ADICUP3029 development platform. The ADT7420 is
a high accuracy digital temperature sensor offering breakthrough performance over a wide industrial range, housed in a 4 mm × 4 mm
LFCSP package

Applications
• RTD and thermistor replacement

• Thermocouple cold junction compensation

• Medical equipment

• Industrial control and test

• Food transportation and storage

• Environmental monitoring and HVAC

• Laser diode temperature control

Part #: EVAL-ADT7420-PMDZ

Table of
Contents arrow.com | 1 855 326 4757 85
12-Bit, 300 kSPS, Single-Supply, Fully Isolated, Data Acquisition System for 4-20
mA Inputs: CN0336

This circuit is a completely isolated 12-bit, 300 kSPS data acquisition system utilizing only three active devices. The system processes
4 mA to 20 mA input signals using a single 3.3 V supply. The total error after room temperature calibration is ±0.06% FSR over a
±10°C temperature change, making it ideal for a wide variety of industrial measurements.

ADI parts included in this circuit

Part # Description
Precision, Low Noise, CMOS, Rail-to-Rail Input/
AD8606
Output Op Amp
AD7091R 1 MSPS, Ultralow Power, 12-Bit ADC
4-Channel, 2.5 kV Isolators with Integrated DC-
ADuM5401
to-DC Converter

Board Part #: EVAL-CN0336-PMDZ

Fully Isolated Conductivity Measurement Data Acquisition System: CN0349

The solution provides a complete, robust data acquisition solution for processing conductivity cell outputs, including temperature
correction. This circuit is ideal for measuring the ionic content of liquids, water quality analysis, and chemical analysis. This design
solution is optimized for high precision and low cost, and it uses only five active devices. The circuit has a total error of less than 1% FSR
after calibration.

ADI parts included in this circuit

Part # Description
250 kSPS, 12-Bit Impedance Converter Network
AD5934
Analyzer
Precision, Low Noise, Rail-to-Rail Input/Output,
AD8606
CMOS, Op Amp (Dual)
CMOS, Low Voltage, I2C Controlled, Octal SPST
ADG715
Switches Board Part #: EVAL-CN0349-PMDZ
ADuM1250 Dual-Channel I2C Digital Isotator
ADuM5000 2.5 kV, Isolated DC-to-DC Converter

86
Analog Devices Pmod Daughter Boards

Low Noise, Single-Supply, Toxic Gas Detector, Using an Electrochemical Sensor


with Programmable Gain TIA for Rapid Prototyping: CN0357

This circuit is a single-supply, low noise, portable gas detector, using an electrochemical sensor. The Alphasense CO-AX carbon
monoxide sensor is used in this example. Electrochemical sensors offer several advantages for instruments that detect or measure the
concentration of many toxic gases. Most sensors are gas specific and have usable resolutions under one part per million (ppm) of gas
concentration.

ADI parts included in this circuit

Part # Description
ADA4528-2 5.0 V, Ultralow Noise, Zero Drift, RRIO, Dual Op AMP
1024-Position, 1% Resistor Tolerance Error, 50-TP
AD5270-20
Memory Digital Rheostat
ADR3412 Micropower, 0.1% Accurate, 1.2 Voltage Reference
AD8500 Micropower, RRIO, Op AmP Board Part #: EVAL-CN0357-PMDZ
AD7790 Low Power, 16-Bit Sigma-Delta, ADC

Table of
Contents arrow.com | 1 855 326 4757 87
FPGA Boards with the Pmod Connector

Intel part Board Name Brief Description Category Partner


Industry 4.0 gateway board with serial
IoTCentipede™ Development kit,
▶▶ Intel Cyclone
® ®
connectivity for aggregation and protocol NovTech
(Page 22) pre-production board
bridging
MAX1000 - IoT Maker FPGA IoT Maker Board based on Intel MAX
Intel® MAX®10 SOM, Development kit Trenz Electronic
Board 10 FPGA with 8000 LEs
CYC1000 with Intel
▶▶ Intel Cyclone 10 Cyclone 10 FPGA Intel Cyclone 10 LP module with 25K LEs SOM, Development kit Trenz Electronic
(Page 10)
AnalogMAX-ADI Dust Smoke detector module with three sensors
▶▶ Intel MAX10 SOM, Development kit Trenz Electronic
Sensor (Page 52) and Intel MAX 10 FPGA with 8K LEs
Intel Cyclone10 LP Reference kit based on CYC1000 Intel
▶▶ Intel Cyclone10 LP SOM, Development kit Trenz Electronic
Reference Kit (Page 12) Cyclone 10 LP module

▶ Featured in this guide

88
The journey from concept to production for electronic and
computing products is complex, and the shortest route to
market is not always clear. As the premier global provider of
products, services, and solutions, Arrow can streamline the
design process and supply chain to get to market quickly and
efficiently.

Assisting customers at each stage of the product’s


development, Arrow offers unparalleled engineering
expertise and solutions that work across a broad range of
applications. Our design services, training, and tools keep
projects on track and accelerate time-to-market.

Arrow provides:
>> Full support from developing application concept to
product design and production
>> Advise on technology, system architecture and
end-market specific needs
>> Unbiased technology and solutions options
>> Education and training on new technologies, products,
and trends
>> On-demand engineering experts and resources
>> A vast eco-system to enable quick-solution build out

This partnership with Analog Devices and Intel is another


example on how Arrow breaks down design complexity by
bringing together a complementary portfolio of offerings
from several vendors.

Table of
Contents arrow.com | 1 855 326 4757 89
Overview of Analog Devices Product Portfolio

As the leading provider in analog & mixed signal technologies, Analog Devices provides solutions that bridge the
physical and digital world. Armed with cutting edge technology and deep market knowledge, we are paving the
way for a safer, healthier and enjoyable world. When you need a new perspective, advanced technology solutions
and engineering expertise, you will find it here. Learn more about us by visiting analog.com

Sense Measure Connect


Sensing capabilities that ensure Signal conditioning capabilities Next-generation connectivity
precision, power efficiency, and turn sensitive signals into useful solutions from RF to mmWave,
robustness are at the highest information for solving challenging optical, and cable technologies
integrity from the start. measurement problems. for a number of wireless protocols
and range requirements to enable
robust networks.

90
NEXT STEPS
The standards-based development approach with
FMC, Arduino and Pmod offers design flexibility and
customization options to meet application needs. These
standards are being adopted by 3rd party solutions
providers, greatly increasing the number of available
solutions.

This guide highlights solutions from the growing


ecosystem of partners. New solutions will be continuously
introduced as the Analog Devices, Intel, and Arrow
ecosystem continues to expand.

Visit arrow.com to buy any


of the Intel, Analog Devices
or partner boards featured
in this guide.
Your local Arrow sales and
field application engineers
can assist with application-
specific requirements,
software tools, or any other
engineering or supply chain
requirements.

Table of
Contents arrow.com | 1 855 326 4757 91
Are You Five Years Out?
Most people live in the present. The world of now. But a handful of us work
in a unique world that doesn’t quite exist yet—the world of Five Years Out.

Five Years Out is the tangible future. And the people who live and work
there know that new technologies, new materials, new ideas and new
electronics will make life not only different, but better. Not just cheaper,
but smarter. Not just easier, but more inspired.

Five Years Out is an exciting place to be. So exciting that, once you’ve
been there, it’s hard to get excited about the present. Because we know
what’s coming is going to be so much better.

Five Years Out is a community of builders, designers, engineers and


imaginers who navigate the path between possibility and practicality.
Creating the future of everything from cars to coffeemakers.

Are you one of them? Then you’re probably working with us.

Via Phone
Contact your local Arrow representative at
North America +1 855 326 4757 Analog Solutions Guide for FPGA-Based Designs
Europe, Middle East, &Africa +44 20 3936 5486
Asia-Pacific +86 400 920 0628
Or visit us at arrow.com

Arrow Electronics, Inc.


9201 East Dry Creek Road
Centennial, CO 80112, USA

Analog Devices_Intel_Guide_00V1_2911/18

You might also like