Scribd Logo
Upload

Welcome to Scribd!

  • 21 views

    Technical Datasheet Moulded Rubber Fenders

    Uploaded by

    Fandy Sipata
    This technical datasheet provides material properties and requirements for molded rubber fenders made of SBR/NR rubber. Key properties include a tensile strength of 16 MPa, density of 1.25 g/cm3, hardness of 78 Shore A, elongation at break of 350%, and compression set of 30% maximum after 22 hours at 70°C. Tolerances for large rubber fender profiles are +/- 5. The values given are meant as guidelines since testing is done under laboratory conditions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Technical Datasheet Moulded Rubber Fenders

    Uploaded by

    Fandy Sipata
    21 views1 page
    This technical datasheet provides material properties and requirements for molded rubber fenders made of SBR/NR rubber. Key properties include a tensile strength of 16 MPa, density of 1.25 g/cm3, hardness of 78 Shore A, elongation at break of 350%, and compression set of 30% maximum after 22 hours at 70°C. Tolerances for large rubber fender profiles are +/- 5. The values given are meant as guidelines since testing is done under laboratory conditions.

    Original Description:

    Technical+datasheet+Moulded+Rubber+Fenders

    Original Title

    Technical+datasheet+Moulded+Rubber+Fenders

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This technical datasheet provides material properties and requirements for molded rubber fenders made of SBR/NR rubber. Key properties include a tensile strength of 16 MPa, density of 1.25 g/cm3, hardness of 78 Shore A, elongation at break of 350%, and compression set of 30% maximum after 22 hours at 70°C. Tolerances for large rubber fender profiles are +/- 5. The values given are meant as guidelines since testing is done under laboratory conditions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    21 views1 page

    Technical Datasheet Moulded Rubber Fenders

    Uploaded by

    Fandy Sipata
    This technical datasheet provides material properties and requirements for molded rubber fenders made of SBR/NR rubber. Key properties include a tensile strength of 16 MPa, density of 1.25 g/cm3, hardness of 78 Shore A, elongation at break of 350%, and compression set of 30% maximum after 22 hours at 70°C. Tolerances for large rubber fender profiles are +/- 5. The values given are meant as guidelines since testing is done under laboratory conditions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Technical datasheet Moulded Rubber Fenders

    Typical material properties for guidance purposes

    Material: SBR/NR

    Property Test specification Units Requirement/Value

    Tensile strength DIN 53504 Mpa 16 Mpa

    Density DIN 53479 g/cm3 1,25

    Hardness DIN 53505 Shore A 78° (maximum)

    Elongation at Break DIN 53504 % 350

    Compression Set DIN 53517 % 30 (Max.) 22 h / 70° C

    Abrasion Resistance DIN 53516 mm3 100 (maximum)

    Tear growth Resistance DIN 53507 kN/m 70

    Ozone Resistance DIN 53509 No cracks visible by eye

    Seawater Resistance DIN 86076 Shore A Hardness ± 10°

    Tolerances: for large rubber fenders of profiles +/- 5

    The above values are tested at room temperature and regular relative humidity. The given values are
    guiding values. The specified values are based on tests under laboratory conditions and demonstrated
    standard values. Therefore the values cannot be taken as a warranty of features. The application of our
    products is beyond our control and does not absolve the user of tests by his own concerning the intend use.

    You might also like