BFM 1015M

for marine applications 209 - 440 kW|280 - 590 hp at 1500 - 2100 min-1|rpm
emission certified & type approved

 Water-cooled 6 or 8-cylinder V engines  DEUTZ marine engines are developed

(90°) with turbocharging and charge air especially for the requirements of ma-
cooling. rine applications and meet the require-
ments of the classification societies.
 Low fuel consumption, low mainte-
Type Approvals of the IACS classes1)
nance costs and long engine life reduce
and other classes are available on re-
the operating costs.
quest.
 100% power take-off at flywheel and
front end and additionally two PTO
 The extremly compact engine design
and customer friendly accesoires re-
drives with a total torque of up to 400
duce the installation costs.
Nm.
 The engine-driven cooling water pumps  The robust engine design allows world-
 The engines fulfil the emission limit val- wide operation even with high sulphur
simplify the installation for keel and raw- ues in accordance with IMO, EU and
fuels.
water cooling. ZKR (CCNR).

Technical data
Engine type BF 6M 1015 M BF 6M 1015 MC BF 8M 1015 MC
No. of cylinders 6 6 8
Bore/stroke mm | in 132 / 145 |5.20 / 5.71 132 / 145 |5.20 / 5.71 132 / 145 |5.20 / 5.71
Displacement l | cu in 11,9 |727 11,9 |727 15,9 |969
Compression ratio 17:1 17:1 17:1
Nominal speeds propulsion engines min-1 | rpm 1800 / 1900 / 2100 1800 / 1900 / 2100 1800 / 1900 / 2100
Nominal speeds auxiliary engines min-1 | rpm 1500 / 1800 1500 / 1800 1500 / 1800
Specific fuel consumption2) g/kWh | Ib/hp-hr 213 |0.35 206 |0.34 209 |0.34

Power output 3) BF 6M 1015 M BF 6M 1015 MC BF 8M 1015 MC

Propulsion engines - LG A kW | hp 214 |287 287 |385 383 |514
- LG B kW | hp 240 |322 330 |443 440 |590
Auxiliary engines - LG G 50Hz kW | hp 195 |261 250 |335 333 |447
60Hz kW | hp 211 |283 271 |363 362 |485
- LG N 50Hz kW | hp 210 |282 285 |382 380 |510
60Hz kW | hp 228 |306 310 |416 413 |554

LG A: Unlimited continuous operation with unlimited workload.

LG B: Limited continuous operation: max. 3000 oh p.a.4)
Operating time with more than 90% of maximum power: max. 1500 oh p.a.
Admissible workload: max. 70% of rated power.
LG G: Unlimited continuous operation with unlimited workload.
LG N: Unlimited continuous operation with limited workload.
Operating time with more than 90% of maximum power: max. 6000 oh p.a.
Admissible workload: max. 80% of rated power.

1) IACS – International Association of Classification Societies

2) Best full load consumption refers to diesel with a density of 0.835 kg/dm3 at 15°C | 6.96 lb/US gallon at 60°F.
3) Capacity data in accordance with ISO 3046-1.
Further ratings on request.
4) Bh p.a.: Betriebsstunden pro Jahr

The data on this data sheet are for information purposes only and are not binding values. The data in the quotation is definitive.
Torque curve
Power group A 2100 min-1 Power group B 2100 min-1
BF6M1015 M I BF6M1015 MC I BF8M1015 MC BF6M1015 M I BF6M1015 MC I BF8M1015 MC

440/ 440/ BF8M 1015 MC

POWER (kW)

POWER (kW)
590 590
BF8M 1015 MC
B
360/ 360/
483 483
BF6M 1015
100 MC
BF6M 1015 MC
280/ 280/
375 375
BF6M 1015
100 M
BF6M 1015 M
200/ 200/
268 268

120/ 120/
161 161

3000 3000
2213 2213

TORQUE (Nm)

TORQUE (Nm)
2700 2700
1991 1991

2400 2400
1770 1770

2100 2100
1549 1549
BF8M 1015
100 MC

1800
0 1800
3000 BF8M 1015 MC 3000

0
1500 1500 BF6M 1015
10 MC
1328 1328
BF6M 1015 MC
1200 1200
885 885
BF6M 1015 M
BF6M 1015 M
900 900
664 664
1200 1400 1600 1800 2000 2200 min-1 1200 1400 1600 1800 2000 2200 min-1

Dimensions - raw water cooling

F

Order no. 0031 1933 / 07 / 2013 / VC-CM

E

B A

A B C D E F Weight
BF 6M 1015 M mm | in 980 |38.6 1316 |51.8 1159 |45.6 462 |18.2 697 |27.4 1379 |54.3 1080 |42.5
BF 6M 1015 MC mm | in 980 |38.6 1316 |51.8 1138 |44.8 443 |17.4 695 |27.4 1482 |58.3 1180 |46.5
BF 8M 1015 MC mm | in 1150 |45.3 1334 |52.5 1057 |41.6 360 |14.2 697 |27.4 1650 |65.0 1380 |54.3

Dimensions - keel cooling

F

B A
A B C D E F Weight
BF 6M 1015 M mm | in 980 |38.6 1316 |51.8 1139 |44.8 462 |18.2 677 |26.7 1050 |41.3 1020 |40.2
BF 6M 1015 MC mm | in 980 |38.6 1316 |51.8 1139 |44.8 462 |18.2 677 |26.7 1375 |54.1 1110 |43.7
BF 8M 1015 MC mm | in 1150 |45.3 1334 |52.5 1061 |41.8 360 |14.2 701 |27.6 1540 |60.6 1310 |51.6
Note: The engine dimensions and weights vary depending on the scope of delivery.
For more information please contact the DEUTZ AG Köln or the responsible sales partner.

DEUTZ AG ⋅ Ottostraße 1 ⋅ 51149 Köln ⋅ Deutschland ⋅ Telefon +49 (0) 221 822-0 ⋅ Telefax +49 (0) 221 822-3525 ⋅ www.deutz.com ⋅ E-Mail: [email protected]