Scribd
Upload
31 views

Model-Based Energy Audits in Water Resource Recovery Facilities

This technology fact sheet describes a model-based energy audit tool developed by the Catalan Institute for Water Research (ICRA) and Aquafin N.V. to minimize energy consumption and maximize biogas production at water resource recovery facilities (WRRFs). The tool uses dynamic models that integrate the water and sludge lines to evaluate multiple strategies without affecting plant operations. It will be demonstrated at two full-scale WRRFs in Spain and Belgium. The model-based approach requires high quality data and regular updates for changes in plant configuration or influent composition, but provides the ability to evaluate future scenarios and optimal strategies for reducing energy use and costs.

Uploaded by

Tom
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
31 views

Model-Based Energy Audits in Water Resource Recovery Facilities

This technology fact sheet describes a model-based energy audit tool developed by the Catalan Institute for Water Research (ICRA) and Aquafin N.V. to minimize energy consumption and maximize biogas production at water resource recovery facilities (WRRFs). The tool uses dynamic models that integrate the water and sludge lines to evaluate multiple strategies without affecting plant operations. It will be demonstrated at two full-scale WRRFs in Spain and Belgium. The model-based approach requires high quality data and regular updates for changes in plant configuration or influent composition, but provides the ability to evaluate future scenarios and optimal strategies for reducing energy use and costs.

Uploaded by

Tom
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

R3Water Technology Fact Sheet

Model-based energy audits in water resource recovery facilities


Catalan Institute for Water Research (ICRA) and Aquafin N.V.

DESCRIPTION One of the largest urban consumers • Monitoring of N 2 O and CH 4 emissions.


of energy are water resource recovery facilities
(WRRFs, formerly wastewater treatment plants).
Within a WRRF, electricity consumption accounts for
between 25 and 40% of the facility’s total operating
costs. WRRFs are therefore important targets for
reducing energy demand. Energy audits, which
identify opportunities to reduce energy use and
greenhouse gases in WRRFs, are typically based on the
average energy consumption of a facility; they include
benchmarking with similar plants or comparison
against some standard performance indicators.
However, current energy audits could potentially be
improved through the use of dynamic models that
integrate water and sludge lines. Because this
potential had not been explored in the European
market, Aquafin and ICRA developed a model-based
energy audit tool that will be demonstrated through
R3Water.

The main goal of the technology is to minimize


energy consumption and maximize biogas production
in WRRFs.
APPLICABILITY AND PRE-REQUISITES
The model-based energy audit tool can be used to:

Select plant-wide alternatives that reduce energy


consumption, costs, and CO 2 emissions.

• Evaluate aeration and pumping strategies.


• Study the interactions between the sludge line
(with high nutrient loads in the return stream) and
the liquid line.
• Assess the use influent organic content (to
maximize either nutrient removal or biogas
production).
The key elements of the technology are:
Complete realistic cost assessments.
• Good Modelling Practices (GMP) – proper use
and calibration of existing ASM models. • Highlight critical situations where peak demand
• Energy models – proper description of energy charges are driving up energy costs.
consumption. • Develop strategies to reduce energy consumption
• Cost models – implementation of real electricity and maximize energy production at peak time-of-
tariff structures. use periods.
•

The research leading to these results has received funding www.r3water.eu


from the European Union Seventh Framework Programme
(FP7/2007-2013) under grant agreement n° 619093.
R3Water Technology Fact Sheet

• Find the optimal contracted power for a specific


plant.

ADVANTAGES OF THE TECHNOLOGY REFERENCES


The model-based energy audit tool provides the ability
The technology will be demonstrated at two full-scale
to evaluate:
WRRFs:
• Multiple strategies without affecting the process.
Girona WRRF (Spain)
• Future scenarios (excellent tool for planning).
• 206,250 population equivalents (PE).
DISADVANTAGES
• Plug-flow biological reactor.
The tool requires:
• Anaerobic digestion with energy production.
• High quality data from the design and operation
of the WRRF.
• Highly-qualified personnel for correct use, which
is why ICRA suggests providing the tool as a
service with technical support.

OPERATION AND MAINTENANCE The model-


based approach has to be updated any time there is a
significant change in plant configuration or the
environment (e.g. influent wastewater composition,
electricity tariff, etc.).

COSTS
This service will cost around 25,000 €. A typical model
development study takes 3 months (assuming good
quality data is provided by the WRRF). The model Harelbeke WRRF (Belgium)
layout will be given to clients. If clients purchase
• 116,100 PE.
specific software and learn how to use it, they can
• Conventional activated sludge process.
exploit the model. Otherwise, a maintenance contract
• Anaerobic digestion with energy production
can be established.

CONTACT

Lluís Corominas: [email protected]


Ignasi Rodríguez-Roda: [email protected]
Mehlika Ayla Kiser: [email protected]

Alessio Fenu: [email protected]


Tom Wambecq: [email protected]

The research leading to these results has received funding www.r3water.eu


from the European Union Seventh Framework Programme
(FP7/2007-2013) under grant agreement n° 619093.

You might also like