DATA SHEET

Numerical control ModEva Pac

ModEva Pac is designed to control graphically in 2D and indicate
synchronized press brakes (up- possible collisions with the tools
stroking or down-stroking) or or the machine frame. The system
mechanical / hydraulic stops, with also shows the position of the
4 or 7 axes. sheet between the tools.

With its large 15-inch touch screen, The software enables the machine
its 2D graphic interface and its manufacturers to configure the
simple keyboard with large keys, axes, inputs/outputs and auxiliary
this compact numerical control functions according to their needs.
gives the operator more power
and efficiency to control his ModEva Pac is fully compatible
machine, and at the same time a with our DNC 880S and 880 or
sense of easiness and comfort. DNC 80, making it an ideal control
for retrofitting old machines.
The basic functions are accessible
by 6 subject-oriented keys giving ModEva Pac is integrated into a
access to clearly and logically sleek and modern housing, or can
designed menu pages. The optionally also be delivered as a
bending solutions are displayed robust panel.

Standard software specifications

User friendliness Remote control Particularities

Improved usability thanks to Installation of any remote control „„ Conversion Inch/mm, TON/
the latest software version, who software – free or licensed – of the TONS etc.
makes use of all the inherent manufacturer’s choice is allowed „„ Force depending of sheet posi-
simplicity and user-friendliness of on the NC. tion.
the touch screen. Large function „„ Measurement of speed, stop-
buttons, vivid colors and pop-up ping time and leakage of the
numerical pads with large keys all beam.
make for a more productive user „„ Management of CE safety cy-
experience. Beam functions cles.
„„ Interactive display of safety utili-
Easy Indexing function, comprising ties and customized messages.
the capacity to determine if index
is passed or not, and consequently
TouchProfile function inform the operator to move the
beam down. The capacity to de- Memory capacity
Intuitively drawing a profile on termine if beam is desynchronized
the screen for fast and precise (with 2 switches directly connected „„ Infinite number of programs,
2D program creation. Adjusting to the NC) at start up, and accord- which can be saved in NC mem-
the dimensions is easily done ingly asks the operator to press ory or directly in Windows®.
by touching the desired angle or foot pedal until the beam is parallel „„ Infinite number of sequences
length and introducing its value again. per program.
on a pop-up numerical pad with „„ Infinite number of punches.
large keys. „„ Infinite number of dies.
„„ 5 Materials.
„„ 12 Back-gauge configurations.

April
© Cybelec S.A. 2017 2017 1/6
V2.3
Axes and bending functions
The elements listed hereafter are available and can be configured in all numerical controls supplied with
standard software (within the number of axes and inputs/outputs available).

Standard Axes Dynamic crowning Auxiliary functions F1 to F10

„„ Y1 - Y2 : Synchronized axes for Voltage output 0-10 VDC to adjust Configurable auxiliary functions
the beam (servo-valves, propor- the hydraulic crowning. Dynamic (number eventually limited ac-
tional valves). If a current output correction of the bending table, the cording to the type of function and
is needed, the MSV 402 (see beam and axis R position. Calculat- management). 24 VDC voltage or
Options & Accessories) becomes ed not only in relation with force, logical order outputs, with or with-
necessary. but also with sheet width. If current out position control by means of a
„„ X, X1, X2, X5, X6 : Main back control is desired, the MVP 100 potentiometer transducer. Special
gauge axes. (see Options & Accessories) is the controls for gauge fingers, bending
„„ X1 ABS, X2 REL : Secondary solution. aids, die movements.
back gauge axes in absolute or
relative mode, generally used
for motorized finger gauge.
„„ Z, Z2, Z5, Z6 : Axes for left/right
movement of the back gauge. Angle protractor LazerSafe PCSS interface
Possibility to program a position
clearing movement (“retraction”) Y1, Y2 and crowning corrections Allows selecting the safety mode,
in Z-axis for faster bending calculation based on the measure and checking the LazerSafe’s PCSS
cycles. of up to 3 angles on the bend. Free status and log file.
„„ R, R2, R5, R6 : Back gauge interface for RS232 or wireless
height-adjustment axes. communication between Mitutoyo
„„ M1, M2 : Axes for the adjust- angle protractor (not included) and
ment / movement of the die. the NC. Uses a receiver with IBRit-
Rf1 type USB interface. Conical folds

Comfortable programming for

Pressure conical folds (requires X, X2 and
adapted stop fingers).
Voltage output 0-10 VDC for
pressure valve control. If current
control is desired, the MVP 100
(see Options & Accessories) is the
solution.

Software options
Special axes Message interpreter Bending aids

„„ X3, X4, X7, X8, Z3, Z4 : front Allows remote control of the NC Management of conventional
gauge axes. with commands sent in a file via bending aids, or of simplified
„„ H, H2 : rear sheet support axes Network or RS232. Generally used mechanic bending aids with 2 axes
(not calculated). for interfacing with robots, bar (AP and H) interpolated with the
„„ H3, H4 : calculated front sheet code readers, etc. beam.
support axes.

Tandem operation

Management of 2 or more press

brakes coupled together in order
to bend sheets too long to be bent
with one press.

April
2017 2/6 © Cybelec S.A. 2017
V2.3
Technical characteristics

Keyboard Large keys, easy to use with working gloves

Screen 15 inch color Touch Screen, 1024 x 768 with LED back-light
System Windows® 7 Embedded
CPU AMD Fusion T40R – 1GHz
RAM 4 GB
Mass memory 16 GB flash
Communication • 3 USB 1.1 (2x external, 1x internal)
• 1 parallel (printer)
• 1 RS232
• 1 RJ45 Ethernet
• 1 VGA
Axes High counting speed axes (250 KHz), with PID regulator and
programmable resolution
Power supplies • Numerical control: + 24 VDC ±10 %, 2A (~ 50W)
• Digital inputs/outputs: + 24 VDC ±10 %
Incremental encoder inputs 5 VDC line drivers
Digital inputs 16 inputs Optocoupled 24 VDC stabilized ±10 %
Analog inputs 8 inputs 0-10 VDC
Digital outputs 16 outputs Optocoupled 24 VDC, max. 0.3 A / output
Voltage outputs (axes) 4 or 7 outputs   ±10 VDC output impedance
Zout= 100 Ω
Load Zi ≥10 kΩ
Analog voltage outputs 2 outputs   0-10 VDC output impedance
(functions pressure, crowning or Zout = 100 Ω
auxiliary functions) Load Zi ≥ 10 kΩ
Operating conditions Min. 5° Celsius, max. 45° Celsius.
Relative humidity 10 to 85% non-condensing.
Weight • Panel version, approx. 5 kg
• Box version, approx 15 kg
EC Directives IEC61131-2
Available languages CH-中文 (Chinese), CZ-Český (Czech), DE-Deutsch (German), DK-Dansk
(Danish), ES-Español (Spanish), FI-Suomi (Finnish), FR-Français (French),
GB-English, GR-Ελληνική (Greek), HU-Magyar (Hungarian), IT-Italiano
(Italian), KO-한국어 (Korean), NL-Nederlands (Dutch), PL-Polski (Polish),
PT-Português (Portuguese), RU-Русский (Russian), SE-Svenska (Swedish),
SI-Slovensko (Slovene), TR-Türkçe (Turkish), TW-台灣 (Taiwanese).
Language translation modifiable by manufacturer or end-user.

April
© Cybelec S.A. 2017 2017 3/6
V2.3
Dimensions

Box version 213

395

"
15

668.3
550
616.5

Ins Home PgUp 7 8 9 Esc

Del End PgDn 4 5 6

1 2 3

+
- 0

Shift Ctrl Alt

Ø23

210 241.4

Attachment dimensions

70
60 A
R4.5 7xØ7
R3.5

40 x 95
86
134
70

60
40

61

13
5°
B
40
80
95 60 x 60 or 65 x 65

134 80 x 80 x 80

When the adapting plate is removed, the ModEva Pac Two adapters are provided.
attachment is mechanically compatible with DNC 880S Stick the appropriate one on
top of the box.

April
2017 4/6 © Cybelec S.A. 2017
V2.3
Panel version 83

"
15
550

Ins Home PgUp 7 8 9 Esc

Del End PgDn 4 5 6

1 2 3

+
- 0

Shift Ctrl Alt

395

Integrating opening dimensions

TOP

531.5
526
471.5

12 x Ø 4
287.5

266.5

364
61.5
7
0
0
7.5
48.6

189.5

330.4

371.5
379

BOTTOM

April
© Cybelec S.A. 2017 2017 5/6
V2.3
 Options & Accessories

S-OFT-OPT08 Option 08, Message interpreter

S-OFT-OPT33 Option 33, Front gauge axes X3 - X4 and X7 - X8
S-OFT-OPT34 Option 34, Front gauge axes Z3 and Z4
S-OFT-OPT38 Option 38, Rear axes H1 and H2 (sheet support)
S-OFT-OPT42 Option 42, Conventional bending aids, AP1 to AP4
S-OFT-OPT52 Option 52, Front axes H3 and H4
S-OFT-OPT86 Option 86, Strain gauges
S-OFT-OPT89 Option 89, Tandem management
S-OFT-OPT90 Option 90, Bending aids with simplified mechanics, AP and H
S-OFT-OPT91 Option 91, Slave axes
S-OFT-3D Offline software PC-ModEva 3D, CYCAD, with CD-Rom and USB key
S-CAH-CybVA6 Interface card for Hörbiger proportional valves.
S-MVP-100/A Voltage / current conversion module (0-10V → 0-0.5 / 0-2 A) for pressure
and crowning valves, to be fitted in the electric cabinet.
S-MSV-402/A Voltage / current conversion module (±10V → ±50 mA, ±300 mA) for
servo-valves.

Ordering information

Available models
Number of axis
Version S-MOD-PAC4PS/BW
(Box or Panel) S-MOD-PAC4PS/P
S-MOD-PAC7PS/BW
S - MOD - PAC 7P S/ BW S-MOD-PAC7PS/P

Press type Color

(White)

All specifications are subject to modification without notice

ModEva™, all rights reserved
April © Cybelec S.A. 2017
2017 6/6 Cybelec S.A. • Rue des Uttins 27 • CH-1401 Yverdon-les-Bains • Switzerland
V2.3 [email protected] • www.cybelec.ch
Tel. +41 24 447 02 00 • Fax +41 24 447 02 01