T R EL L E B O RG S E A L I N G S O LU T I O N S

Orkot®
TLM & TXM
Marine Bearings

YO U R PA R T N ER F O R S E A L I N G T EC H N O LO GY
T R EL L E B O RG S E A L I N G S O LU T I O N S

Your Partner for Sealing Technology

A GLOBAL APPROACH

Trelleborg Sealing Solutions is a world-leading manufacturer Part of the Trelleborg group of companies, Orkot ® Marine
and supplier of bearings and bearing materials to the shipping Bearings has been active within the marine and shipping
and marine industries. industry since 1980.

Supported by an extensive global network of manufacturing Apart from Marine bearings, Trelleborg offers a broad variety of
plants, agents and distributors, we are able to offer the highest products for on-deck machinery and other equipment.
levels of quality and service associated with a leading global The product range includes o-rings, static, linear and rotary
company. seals, wear rings, scrapers, bearings and custom made
 elastomer and plastics parts.

TLM MARINE CHARACTERISTICS TXM MARINE CHARACTERISTICS

Orkot® TLM Marine is an advanced, reinforced polymer Orkot® TXM Marine is an advanced reinforced medium weave
(sometimes called synthetic polymer alloy) solid lubricants. The polymer material (sometimes called synthetic polymer alloy)
material has exceptional wear resistance and virtually no swell using a unique manufacturing process that provides a high
in water, providing dimensional stability. concentration of PTFE in the sliding area while maintaining high
compressive strength. The PTFE layer is several millimetres
Orkot® TLM Marine tolerates edge loading and misalignment thick, making it tolerant to wear, while maintaining its low
even with the heaviest loads. friction properties throughout the service life of the bearing.
The PTFE layer is backed by our well known polymer, Orkot®
Orkot® Marine Bearings are installed with an interference fit. TLM Marine giving a truly homogeneous bearing material
Bearings are normally freeze fitted using liquid nitrogen but can without a metal backing layer.
be press fitted or resin chocked as required.
In areas where the running conditions are dry, Orkot® TXM
Where there are extended periods without lubrication, such as Marine has proved partic- ularly effective in eliminating stick-
upper pintle bearings under light ballast conditions, Orkot®TLM slip problems normally associated with these oper- ating
Marine proves especially effective. parameters. The special PTFE layer provides for similar
mechanical properties to Orkot® TLM Marine, but with
substantially reduced friction and wear characteristics.
SERVICE AND SUPPORT

•• Recomendations on adapting our bearings to specific This extensive support service is complimented by a
environmentaland operational conditions comprehensive range of technical documentation and the
•• Calculation of bearing dimensions for internal or on site Orkot®Marine Bearing Calculation program.
machining
•• Technical assistance with bearing installations
•• Full technical backup and support throughout the service
life of the bearing
•• 24 hour emergency support

WORLD WIDE WEB manufacture specific sizes in both tube and sheet form within
24 hours and can supply a full range of finished-machined
Visit our website for general and technical information on products quickly and economically.
Orkot® marine products and applications. You will also be
able to view and download certificates, literature and other
documents. QUALITY & CLASSIFICATION

ISO 9001 approval is held for all manufacturing operations and

www.orkotmarine.com
internal sys- tems while in-house testing resources are used
extensively to simulate the extreme operational environments
For information on Trelleborg’s entire portfolio of sealing &
where the material is used.
bearing solutions please look under www.tss.trelleborg.com.
Orkot®TLM and TXM Marine is approved by all major marine
WORLD WIDE AVAILABILITY classification societies including: Lloyds, DNV, ABS, GL, BV and
NKK. Copies of our approval certificates can be viewed and
Orkot® TLM & TXM Marine stock tubes can be shipped same downloaded from our websites.
day via our world wide distribution network. In addition we can
 Orkot TLM & TXM Marine Bearings

PROVEN BENEFITS
•• Extensive stock available •• Approved dry running capability
•• Classification approval for up to 15N/mm2 •• Low coefficient of friction
•• Virtually no swell in water •• Tolerant to edge loading
•• Environmentally friendly
•• 24 hour turnaround for non-stock sizes

APPLICATIONS
Orkot® TLM & TXM Marine is used in a wide range of proven
applications, including:

•• Rudder bearings •• Sonar bushings and guide strips

•• Water lubricated propeller shaft bearings •• Low magnetic permeability materials for mine counter
•• Stabilizer bearings measure vessels
•• Weapons handling bearings and guide strips •• Door bushes
•• Deck machinery bearings •• Crane mast bearings
•• High strength synthetic rope termination bushings
•• Offshore mooring system bearings
•• Steering and diving system bearings
•• Steering gear bearings
•• Stern roller bearings
•• Slipway pads
 O R KOT ® T L M & T X M M A R I N E B E A R I N G S

Material Spotlight

MECHANICAL PROPERTIES

Property TLM Marine metric TLM Marine inch TXM Marine metric TXM Marine inch

Compressive Strength
Normal to Laminate 300 N/mm2 43,500 lbs/in2 280 N/mm2 40,600 lbs/in2
Parallel to Laminate 90 N/mm2 13,000 Ibs/in2 90 N/mm2 13,000 lbs/in2

Tensile Strength 60 N/mm2 8,700 lbs/in2 55 N/mm2 8,000 lbs/in2

Flexural Strength 65 N/mm2 9,400 lbs/in2 65 N/mm2 9,400 lbs/in2

Shear Strength 80 N/mm2 11,600 lbs/in2 80 N/mm2 11,600 lbs/in2

Impact Strength
Charpy Impact Unnotched 120 KJ/m2 57 ft-lb/in² 120 KJ/m2 57 ft-lb/in²
Normal to Laminate

Hardness - Rockwell M 90 90 90 90

Density 1.3 g/cm3 0.047 Ibs/in3 1.3 g/cm3 0.047 Ibs/in3

Swell in water, % of wall

0.1% 0.1% 0.1% 0.1%
thickness

Thermal Expansion
Coefficient
20 – 100 °C (per °C x 10-5)
68 – 212 °F (per °F x 10-5)
Normal to Laminate 9 - 10 5.0 - 5.5 9 - 10 5.0 - 5.5
Parallel to Laminate 5-6 2.7 - 3.3 5-6 2.7 - 3.3

Sliding Properties
Typical coeffient of friction
running dry against a
corrosion resistant surface
0.13 0.13 0.05 0.05
such as stainless steel.
Bearing Pressure 15N/mm2
/2175 lbs/in2
 Copyright © 2019 Trelleborg AB (publ). All rights reserved. Information and related materials are subject to change without notice.
Trelleborg is a world leader in engineered polymer
solutions that seal, damp and protect critical applications in
demanding environments. Its innovative solutions accelerate
performance for customers in a sustainable way.

Trelleborg Sealing Solutions is a leading developer,

manufacturer and supplier of precision seals, bearings and
custom-molded polymer components. It focuses on meeting
the most demanding needs of aerospace, automotive and
general industrial customers with innovative solutions.

W W W.T S S.T R EL L E B O RG .C O M

facebook.com/TrelleborgSealingSolutions
twitter.com/TrelleborgSeals
youtube.com/TrelleborgSeals
linkedin.com/company/trelleborg-sealing-solutions
Version no. 99USV6BROHN0919

Trelleborg Sealings Solutions Rotherham, Bradmarsh Business Park, Rotherham S60 1BX United Kingdom
Tel: +44 (0)1709 789 829, 24 Hour Emergency Line: +44 7802 463 928, Email: [email protected]

Trelleborg Sealings Solutions Streamwood, 901 Phoenix Lake Avenue, Streamwood, IL 60107 USA
Tel: +1 (630) 289 1500, Email: [email protected]

If you’d like to talk to Trelleborg Sealing Solutions, find your local contact at: www.orkot.com