Scribd
Upload
33 views

Project

The document provides an acknowledgement section thanking various parties for their support and guidance in completing the project. It then provides an abstract summarizing the project as an automatic lighting controller that monitors luminance levels in a room and controls lights to maintain the required illumination. Finally, it outlines the contents of the document, which will describe the components, circuit, working, program code, and conclusions of the automatic lighting controller project.

Uploaded by

Senthil Murugan
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
33 views

Project

The document provides an acknowledgement section thanking various parties for their support and guidance in completing the project. It then provides an abstract summarizing the project as an automatic lighting controller that monitors luminance levels in a room and controls lights to maintain the required illumination. Finally, it outlines the contents of the document, which will describe the components, circuit, working, program code, and conclusions of the automatic lighting controller project.

Uploaded by

Senthil Murugan
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

ACKNOWLEDGEMENT

We express our deep gratitude to Almighty, the supreme guide, for bestowing his

blessings upon us in this entire endeavor.

We would like to express our sincere thanks to Prof. K Radhakrishnan, Head of

Electrical and Electronics Engineering Department, for all his guidance.

A deep sense of gratitude to our guide, Ms Siny Paul(Assistant Professor,

Electrical and Electronics Engineering Department), whose overall direction and

guidance has been responsible for the successful completion of our project.

Finally, we would like to thank all the faculty members of Electrical and

Electronics Department and our friends for their constant support and

encouragement.

i|Page
ABSTRACT

“AUTOMATIC LIGHTING CONTROLLER”, controls the amount of lighting in a


room by constantly monitoring the level of luminance in a room. Lights are then
controlled such that required illumination is available in the room.It can be
applied effectively in commercial buildings, homes, colleges etc.

E.g) On a normal day when there is a bright sun the lights will be OFF. And on a
cloudy day the illumination levels will be low the controller calculates the required
lighting by checking the illumination level and turns ON the lights.

ii | P a g e
CONTENTS

1) Introduction…………………………………………...1
2) Components………………………………………......2
2.1) Arduino Duemilanove (ATMEGA 328)
2.2) Sensor (LDR)
2.3) Liquid Crystal Display

3) Atmega 328 In Detail........................................................6


4) Circuit Diagram................................................................8
5) Working............................................................................9
6) Program Code...................................................................11
7) Program Reference...........................................................14
8) Gallery..............................................................................17
9) Conclusion........................................................................20
10) References and Bibliography..........................................21
10.1) Text book referred

10.2) Website viewed

iii | P a g e

You might also like