DESIGN AND ANALYTICAL PROJECTS

1. Analysis and design of High Rise building frames STAAD PRO

2. Dynamic analysis of Residential Building in Zone2 and zone5 ETABS v9.7.4

3. Analysis and design of G+6 Building in different seismic zones of India STAAD PRO

Analysis of G+30 High-rise buildings by using Etabs for various frame sections
4. ETABS v9.7.4
in ZoneIV and ZoneV

5. Retrofitting of reinforced concrete frames using steel bracings ETABS v9.7.4

Structural analysis of a multi-storied building for different plan

6. ETABS v9.7.4
configurations

7. Analysis and design of multi storied building ETABS v9.7.4

Comparison of analysis and design of regular and irregular configuration of STAAD PRO
8.
multi story building in various seismic zones and various types of soils ETABS v9.7.4

9. Design of circular water tank STAAD PRO

10. Design of residential apartment building STAAD PRO

11. Structural design of concrete structure ETABS v9.7.4

12. Analysis and design of multistory building with grid slab ETABS v9.7.4

13. Effect of wind load on tall buildings in different terrain category ETABS v9.7.4

14. Earth quack analysis of multi storied residential building-a case study ETABS v9.7.4

Seismic performance evaluation of RC building connected with and without

15. ETABS v9.7.4
X-Braced friction Dampers

16. Dynamic response of high rise structures under the influence of shear walls ETABS v9.7.4

Study of behavior of seismic evaluation of multistoried building with floating

17. ETABS v9.7.4
columns

18. Planning and design of the main building of five star hotel STAAD PRO

19. Analysis and design of tall building subjected to wind and earthquake loads ETABS v9.7.4

20. Effect of wind on tall building frames-influence of aspect ratio STAAD PRO

Seismic analysis of regular and vertical geometric irregular Rcc framed

21. STAAD PRO
building

Comparison of seismic behavior of a typical multi-storey structure with

22. ETABS v9.7.4
composite columns and steel columns
23. Dynamic analysis of multi-story building for different shapes ETABS v9.7.4

Study of lateral load resisting systems of variable heights in all soil types of
24. ETABS v9.7.4
high seismic zone

25. Shear wall analysis and design optimization in case of high rise buildings ETABS v9.7.4

26. Seismic analysis of a building ETABS v9.7.4

Comparative study of static and dynamic seismic analysis of multistoried RCC

27. ETABS v9.7.4
building

Design and analysis of multi storied building under static and dynamic
28. ETABS v9.7.4
loading conditions

29. Earthquake resistant design of open ground storey building ETABS v9.7.4

30. A comparative study on Rcc structure with and without shear wall SAP2000 V19

Analysis and design of multi storied building for vertical and horizontal
31. SAP2000 V19
loading with and without dampers

32. Comparative analysis of G+1 structure with and without floating column SAP2000 V19

33. Non-linear pushover analysis of flat slab building SAP2000 V19

34. Non linear static analysis for Rcc framed residential building SAP2000 V19

35. A case study on inelastic seismic analysis of six storey Rcc building SAP2000 V19

Comparison between seismic analysis and non-seismic analysis of G+17

36. SAP2000 V19
building

37. Analytical study of braced unsymmetrical Rcc building SAP2000 V19

38. Seismic evaluation of irregular structures SAP2000 V19

39. Behavior of symmetric and asymmetric structure in high seismic zone SAP2000 V19

Dynamic analysis of industrial steel structure by using bracings and dampers

40. SAP2000 V19
under wind load and earthquake load

41. Dynamic analysis of multi-storey Rcc building SAP2000 V19

Non-linear time history analysis of tall structure for seismic load using
42. SAP2000 V19
damper

43. Analysis of G+20 RC building in different zones ETABS v9.7.4

CONCRETE PROJECTS
 Study And analysis of concrete strength parameters using Red mud as a partial Replacement of
1.
binder content with and without Hydrated Lime

2. An Experimental Study On Rubberized Concrete

Experimental study on properties of strength and durability of concrete by partial replacement

3. of fine aggregate with copper slag and cement with egg shell power for M30 and M40 grade of
concrete

Experimental investigation on strength and durability parameters of concrete replacing cement

4.
by glass powder in concrete with different dosages for M25 and M30 grade concrete

5. Effect of nano silica on the compressive strength of concrete

6. Stress-strain behavior of confined normal grade concrete

7. Experimental investigation on partial replacement of cement with dolomite powder

8. Behavior of geopolymer concrete

9. Study of concrete made using fly ash aggregates

10. Mechanical behavior of self compacting and self curing concrete

11. An experimental investigation on mechanical properties of concrete with grapheme oxide

12. Effect of different steel fibers on strength parameters of self compacting concrete

13. Partial replacement of cement by ground granulated blast furnace slag in concrete

14. Effect of fiber length and percentage of sisal on strength of concrete

Strength and permeability properties of concrete using fly ash, Rice husk ash and egg shell
15.
powder

16. Effect of replacement of natural sand by manufactured sand on the properties of cement mortar

17. Utilization of demolished concrete waste for new construction

18. Experimental study on geo polymer concrete by using glass fibers

19. A study on behavior of marble dust in concrete pavement

20. The suitability of crushed over burnt bricks as coarse aggregates for concrete

21. Experimental investigations of coarse aggregate recycled concrete

Experimental investigation on strength of glass power replacement by cement in concrete with

22.
different dosages

23. Partial replacement of coarse aggregates by expanded polystyrene beds in concrete

 Improvement of strength of concrete with partial replacement of coarse aggregates with
24.
coconut shell and coir fibers

25. Application and properties of fiber reinforced concrete

Strength and durability properties of concrete with partial replacement of cement with
26.
metakaolin and marble dust

TRANSPORTATION ENGINEERING

1. A detailed study of CBR method flexible pavement design

2. A study on the performance of flexible pavements

3. National Highway Design-A case study of kadapa to Kurnool National highway

4. Designing pavement for a typical village road in india-A case study

5. Design of flexible pavements by various methods and their cost analysis of each method

6. Pavement design

7. Recycled asphalt pavement mixtures for road construction

8. Study of stone matrix asphalt for the flexible pavement

9. Application of waste plastic as an effective construction material in flexible pavements

10. Influence of coarse aggregates shape factors on bituminous mixtures

11. Feasibility of copper slag-fly ash mix as a road construction material

GEOTECHNICAL ENGINEERING

1. Improvement in CBR value of soil reinforced with jute fibers

2. Improvement of soil stability using shredded Tyre

3. STABILIZATION OF SOIL USING Rice Husk Ash

4. Theoretical analysis of soil nailing, design, performance and future aspects

5. Improvement of soil characteristics using jute geo textile

6. Laboratory study on soil stabilization using fly ash mixtures

7. Soil stabilization using waste fiber materials

8. Usage of plastic waste for the stabilization of soil

9. Response of Pile Group against Cyclic Lateral Loads

10. A case study of piling project and testing