0% found this document useful (0 votes)
40 views1 page

The Bottle Blower Creates The PET Water Bottle by Injecting Air Into A Cylinder of Plastic

The water bottle process begins with creating PET bottles through injection air into plastic cylinders. The bottles are then rinsed, filled with filtered water, and sealed with caps. Finally, the sealed bottles undergo sterilization with UV light before being distributed and sold.

Uploaded by

px Sonar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
40 views1 page

The Bottle Blower Creates The PET Water Bottle by Injecting Air Into A Cylinder of Plastic

The water bottle process begins with creating PET bottles through injection air into plastic cylinders. The bottles are then rinsed, filled with filtered water, and sealed with caps. Finally, the sealed bottles undergo sterilization with UV light before being distributed and sold.

Uploaded by

px Sonar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Water bottle process

The cap loading


machine puts the
cap on to the PET Each bottle is rinsed
Water Bottle, but lightly to sterilised it,
does not seal it. and then is filled and
the cap is the sealed

The bottle blower creates the PET water


bottle by injecting air into a cylinder of
plastic

An air conveyor blows air around the


water bottles to ensure they are clean. Bottles are dried.

UV light is used to kill


bacteria and germs.

Pressure is applied to the raw water, and


the water is pushed through a fine filter.
This filter separates the contaminants
from the raw water. A layer of plastic is
stretched around the
bottled.

The bottles are put


into shops and sold

You might also like