WORKABOUT PRO3

Hand-Held Computer
With Windows Mobile 6.1
Classic & Professional
(Model No. 7527C-G2 & 7527S-G2)
User Manual
February 22, 2010 Part No. 8100200.A

ISO 9001 Certified

Quality Management System
© Copyright 2010 by Psion Teklogix Inc., Mississauga, Ontario
2100 Meadowvale Boulevard, Mississauga, Ontario, Canada L5N 7J9
http:\\www.psionteklogix.com
This document and the information it contains is the property of Psion Teklogix Inc., is
issued in strict confidence, and is not to be reproduced or copied, in whole or in part, except
for the sole purpose of promoting the sale of Psion Teklogix manufactured goods and ser-
vices. Furthermore, this document is not to be used as a basis for design, manufacture, or
sub-contract, or in any manner detrimental to the interests of Psion Teklogix Inc.

WORKABOUT PRO3™™ is a trademark of Psion Teklogix Inc.

Windows® and the Windows Logo are trademarks or registered trademarks of Microsoft
Corporation in the United States and/or other countries.

The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. and any use of such
marks by Psion Teklogix Inc. is under license.

All trademarks and trade names are the property of their respective holders.
Return-To-Factory Warranty
Psion Teklogix Inc. provides a return to factory warranty on this product for a period of
twelve (12) months in accordance with the Statement of Limited Warranty and Limitation of
Liability provided at www.psionteklogix.com/warranty. (If you are not already a member of
Teknet and you attempt to view this warranty, you will be asked to register. As a member of
Teknet, you will have access to helpful information about your Psion Teklogix products at
no charge to you.) In some regions, this warranty may exceed this period. Please contact
your local Psion Teklogix office for details. The warranty on Psion Teklogix manufactured
equipment does not extend to any product that has been tampered with, altered, or repaired
by any person other than an employee of an authorized Psion Teklogix service organization.
See Psion Teklogix terms and conditions of sale for full details.
Important: Psion Teklogix warranties take effect on the date of shipment.

Disclaimer
Every effort has been made to make this material complete, accurate, and up-to-date. In ad-
dition, changes are periodically added to the information herein; these changes will be incor-
porated into new editions of the publication. Psion Teklogix Inc. reserves the right to make
improvements and/or changes in the product(s) and/or the program(s) described in this doc-
ument without notice, and shall not be responsible for any damages, including but not
limited to consequential damages, caused by reliance on the material presented, including
but not limited to typographical errors.
TABLE OF CONTENTS

Chapter 1: Introduction
1.1 About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.2 Text Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.3 WORKABOUT PRO3 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.3.1 The WORKABOUT PRO3 C Hand-Held. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1.3.2 The WORKABOUT PRO3 S Hand-Held . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Chapter 2: Basic Checkout

2.1 Preparing the WORKABOUT PRO3 for Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.1.1 The Main Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.1.2 The Backup Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.2 Turning the WORKABOUT PRO3 On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
2.2.1 Installing the Battery and Switching the Unit On. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.2.2 Switching the Unit Off (Suspend) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.3 Connecting the WORKABOUT PRO3 to a PC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.4 Data Transfer Between the PC & the Hand-Held . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.4.1 Using Microsoft® ActiveSync®. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
2.4.2 Using Microsoft® Vista® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.5 Aligning (Calibrating) the Touchscreen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.6 The Getting Started Centre. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.7 Setting Up a RA2041 Radio––Summit Client Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2.7.1 Assigning the IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
2.7.2 Using the SCU to Connect to the WLAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2.8 The Phone (Windows Mobile 6.1 Professional Only). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2.8.1 The Phone Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
2.8.2 Send & End Calls Using the WORKABOUT PRO3 Keyboard. . . . . . . . . . . . . . . . . . 24
2.8.3 Managing Phone Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
2.9 Resetting the WORKABOUT PRO3 Hand-Held . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
2.9.1 Performing a Warm Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
2.9.2 Performing a Cold Reset to the Windows Mobile 6.1 OS . . . . . . . . . . . . . . . . . . . . . . . 32

WORKABOUT PRO3 with Windows Mobile 6.1 User Manual i

 Contents

Chapter 3: Get To Know WORKABOUT PRO3

3.1 Features of the WORKABOUT PRO3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
3.2 The Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
3.2.1 Battery Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
3.2.2 Removing the Battery Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
3.2.3 Battery Swap Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
3.2.4 Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
3.3 Switching the Hand-Held On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
3.4 The Keyboards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
3.4.1 The WORKABOUT PRO3 Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
3.4.2 Modifier Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
3.4.3 The Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
3.4.4 Alpha Keyboard –– Accessing Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
3.4.5 QWERTY Keyboard –– Accessing Numeric Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
3.4.6 Numeric Keyboard –– Accessing Alpha Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
3.4.7 The Keypad Backlight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
3.5 The Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
3.5.1 Adjusting the Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
3.5.2 Aligning (Calibrating) the Touchscreen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
3.5.3 Screen Orientation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
3.6 Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
3.6.1 The LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
3.7 Audio Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
3.7.1 Adjusting Speaker Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
3.8 Monitoring the Battery and Maximizing Run Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
3.8.1 Storing Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
3.9 Uploading Data in a Docking Station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
3.10 Bluetooth Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
3.10.1 Pairing a Bluetooth Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
3.11 Inserting the SD/MMC Card and SIM Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
3.11.1 Inserting and Removing the Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
3.12 General Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
3.12.1 Caring for the Touchscreen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
3.12.2 Cleaning the WORKABOUT PRO3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Chapter 4: Working With Windows Mobile 6.1

4.1 Navigating in Windows Mobile 6.1 and Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
4.1.1 Navigating Using a Touchscreen and Stylus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

ii WORKABOUT PRO3 with Windows Mobile 6.1 User Manual

 Contents

4.2 Windows Mobile 6.1 Desktop––Today Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

4.2.1 Windows Mobile 6.1 Navigation Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
4.2.2 Today’’s Date, Clock and Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
4.2.3 Ownership Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
4.2.4 E-mail Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
4.2.5 Task Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
4.2.6 Calendar of Upcoming Appointments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
4.3 Start Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
4.3.1 Customising the Start Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
4.4 Managing Files and Folders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75
4.4.1 Creating a New Folder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
4.4.2 Renaming a File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
4.4.3 Copying a File. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
4.4.4 Deleting a File. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
4.5 Using Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
4.5.1 Pop-Up Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
4.6 The Softkey Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
4.7 Programs––Using Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
4.8 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
4.9 Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
4.10 Entering Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
4.10.1 Soft Keyboard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
4.10.2 The Transcriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
4.10.3 Block Recognizer and Letter Recognizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Chapter 5: Programs
5.1 Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
5.2 Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
5.3 ActiveSync® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89
5.3.1 Synchronization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
5.4 Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
5.5 Office Mobile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90
5.5.1 Excel Mobile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
5.5.2 OneNote Mobile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
5.5.3 Word Mobile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
5.5.4 PowerPoint Mobile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
5.6 Demo Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
5.7 File Explorer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101

WORKABOUT PRO3 with Windows Mobile 6.1 User Manual iii

 Contents

5.8 Getting Started. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101

5.9 PTSI Imager Demo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
5.10 Internet Sharing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
5.10.1 Creating an Internet Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
5.10.2 Using Internet Sharing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
5.11 Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103
5.11.1 Creating a Note. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104
5.11.2 Converting Handwritten Notes to Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104
5.11.3 Renaming a Note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
5.11.4 Recording Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
5.11.5 Synchronizing a Note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
5.12 Pictures & Videos. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
5.12.1 Moving Photos to the WORKBOUT PRO. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
5.12.2 Opening a Photo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109
5.12.3 Deleting a Photo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109
5.12.4 Editing a Photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109
5.12.5 Creating a Slide Show . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109
5.13 Internet Explorer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
5.13.1 Browsing Web Sites. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
5.14 Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
5.14.1 Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
5.14.2 Synchronizing E-mail with Outlook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112
5.14.3 Changing Synchronization Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
5.15 Remote Desktop Mobile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
5.15.1 Connecting to a Terminal Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
5.15.2 Disconnecting without Ending a Session. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
5.15.3 Ending a Session . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
5.16 Summit Client Utility (SCU). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
5.17 Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
5.18 Task Manager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
5.19 Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
5.20 Windows Live . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
5.21 Windows Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116

Chapter 6: Settings
6.1 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123
6.2 Personal Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123

iv WORKABOUT PRO3 with Windows Mobile 6.1 User Manual

 Contents

6.3 App Launch Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124

6.4 Buttons Icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126
6.4.1 Up/Down Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126
6.4.2 One Shots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127
6.4.3 Keyboard Macro Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128
6.4.4 Unicode Mapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130
6.4.5 Scancode Remapping. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131
6.4.6 Lock Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134
6.5 Input. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135
6.5.1 Input Method Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135
6.5.2 Options––Additional Choices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .139
6.6 Lock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140
6.7 Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141
6.7.1 Start Menu Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141
6.8 Microphone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142
6.9 Owner Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .143
6.10 Phone (Windows Mobile 6.1 Professional Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .143
6.11 Sound & Notifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .143
6.11.1 Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144
6.11.2 Notifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144
6.12 Today Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145
6.12.1 Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145
6.12.2 Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145
6.13 System Tab Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146
6.14 About. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146
6.15 About Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147
6.16 Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147
6.16.1 Battery Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148
6.16.2 External Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149
6.16.3 Intensity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149
6.17 Certificates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150
6.17.1 Choosing A Certificate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152
6.18 Clock & Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152
6.19 COM Port Manager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152
6.20 Dr. Debug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153
6.20.1 Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154
6.20.2 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154

WORKABOUT PRO3 with Windows Mobile 6.1 User Manual v

 Contents

6.20.3 Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155

6.21 Encryption. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155
6.22 Error Reporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .156
6.23 External GPS (Global Positioning System). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .156
6.24 Manage Triggers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158
6.24.1 Trigger Mappings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159
6.25 Managed Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .161
6.26 Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162
6.26.1 Main Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163
6.26.2 Storage Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163
6.27 Power Icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163
6.27.1 Battery Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .164
6.27.2 Advanced Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .164
6.27.3 Battery Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .165
6.27.4 Built-In Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166
6.27.5 Card Slots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166
6.27.6 Suspend Threshold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167
6.27.7 Wakeup Keys Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168
6.27.8 Suspend Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168
6.28 Regional Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .169
6.29 Remove Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .170
6.30 Screen Icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .170
6.31 Task Manager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .171
6.32 Teklogix Imagers Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .173
6.33 Teklogix Scanners Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .174
6.33.1 Bar Code Settings –– The Scanner Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .175
6.33.2 Options Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .175
6.33.3 Translations Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .177
6.33.4 Ports Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180
6.34 Total Recall. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .186
6.34.1 Creating A Backup Profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .187
6.34.2 Restoring A Profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .190
6.34.3 Viewing a Profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .191
6.34.4 Deleting a Profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .192
6.35 TweakIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .193
6.35.1 Advanced Interface And Network Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .194
6.35.2 Advanced Services Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .195

vi WORKABOUT PRO3 with Windows Mobile 6.1 User Manual

 Contents

6.35.3 Radio Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .196

6.35.4 User System Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .197
6.35.5 Registry Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .198
6.36 Windows Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .198
6.37 Connections Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .198
6.38 Beam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .201
6.39 Bluetooth Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .201
6.39.1 Paired Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .202
6.39.2 Device Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .204
6.39.3 Servers Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .208
6.39.4 Mode Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .209
6.39.5 About Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .210
6.39.6 The Bluetooth GPRS Phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .210
6.40 Connection Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .212
6.40.1 Port Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .213
6.40.2 Call Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .214
6.41 Connections –– Connecting To The Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .214
6.41.1 Modem Connection Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .215
6.42 Wireless Manager Icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .219
6.42.1 Flight Mode –– Disabling Wireless Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .219
6.42.2 Setting Up A Network Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .220
6.42.3 Network Adaptor Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .220
6.42.4 Changing Network Card Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .222
6.42.5 VPN Connection Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .222
6.42.6 Managing An Existing Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .223
6.42.7 Selecting A Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .224
6.42.8 Proxy Server Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .225
6.43 Wireless Statistics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .227
6.44 Wireless WAN (Windows Mobile 6.1 Classic Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .227
6.44.1 Softkey Bar Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .227
6.44.2 Establishing A Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .228
6.44.3 Disconnecting From A Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .229
6.44.4 Advanced Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .230
6.44.5 Tools Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .231
6.44.6 SMS Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .240

Chapter 7: Peripheral Devices & Accessories

7.1 Carrying Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .249

WORKABOUT PRO3 with Windows Mobile 6.1 User Manual vii

 Contents

7.2 Attaching The Hand Strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .250

7.3 Attaching The Pistol Grip. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .251
7.4 The Trigger Back Plate Kit With Flush Mount Pistol Grip. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .253
7.5 Protective Carrying Case. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .257
7.6 Soft Shell Holster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .257
7.7 The Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .259
7.7.1 Secure Battery Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .259
7.8 Adaptor Cable Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .261
7.9 Chargers And Docking Stations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .261
7.9.1 Installation––Chargers And Docking Stations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .261
7.9.2 Power Consumption Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .262
7.9.3 Operator Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .262
7.9.4 Important Charger Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .262
7.10 Desktop Docking Station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .263
7.10.1 Charging A Battery Installed In The WORKABOUT PRO3 . . . . . . . . . . . . . . . . . . .265
7.10.2 Charging A Spare Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .265
7.10.3 Battery Charge Duration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .266
7.10.4 Charger LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .266
7.11 Troubleshooting The Charging Operation Of The Dock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .266
7.12 Linking A WORKABOUT PRO3 To A PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .266
7.13 Linking A WORKABOUT PRO3 To An Ethernet Network . . . . . . . . . . . . . . . . . . . . . . . . . . . .267
7.13.1 Network Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .267
7.14 Troubleshooting The Docking Station Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .268
7.15 AC Wall Adaptor–– Model #PS1050-G1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .268
7.16 Automotive Adaptor––Model #WA3113-G2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .269
7.17 Single Battery Charger––Model #WA3001-G1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .269
7.17.1 Inserting A Battery In The Single Battery Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . .270
7.17.2 Battery Charge Duration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .270
7.17.3 Charge Indicators––Single Battery Charge LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .270
7.18 Quad Battery Charger––Model #WA3004-G1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .271
7.19 Charging Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .271
7.20 Battery Charge Duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .271
7.21 Charge Indicators––The LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .271
7.22 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .272
7.22.1 Excessive Charge Duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .272
7.22.2 Indicator Flashing Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .272
7.22.3 Power LED Does Not Light Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .272

viii WORKABOUT PRO3 with Windows Mobile 6.1 User Manual

 Contents

7.22.4 Indicator Does Not Light When Battery Installed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .272

7.23 Quad Docking Station––WA4204-G2 & WA4304-G2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .273
7.23.1 Quad Docking Station Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .273
7.23.2 Quad Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .274
7.23.3 Inserting A WORKABOUT In The Quad Docking Station . . . . . . . . . . . . . . . . . . . .274
7.23.4 Network Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .274
7.23.5 Battery Charging––LED Behaviour. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .275
7.23.6 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .275
7.24 The Vehicle Cradle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .276
7.24.1 Vehicle Cradle Mounting Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .276
7.25 Mounting Template . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .277
7.26 Wiring Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .277
7.27 Using The Vehicle Cradle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .277
7.28 Maintaining The Vehicle Cradle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .277
7.29 Powered Cradle Installation In High Voltage Vehicles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .278
7.30 Powered Vehicle Cradle Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .278
7.30.1 Wiring Vehicle Power To The Cradle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .278
7.31 The Port Replicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .279
7.32 Scanners And Imagers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .280
7.32.1 Scanning Techniques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .280
7.32.2 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .281
7.32.3 Operating One Dimensional (1D) Laser Scanners. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .281
7.32.4 Operating Two Dimensional (2D) Imagers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .282
7.33 Bluetooth Peripherals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .283

Chapter 8: Specifications
8.1 Hand-Held Computer Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .287
8.2 Radio Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .292
8.2.1 Model RA2041: 802.11 b/g Direct Sequence Spread Spectrum (DSSS) . . . . . . . .292
8.2.2 Model RA3030-G2 GSM/GPRS/EDGE Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .292
8.2.3 Model RA3040-G2 (Siemens HC25 UMTS Modem) . . . . . . . . . . . . . . . . . . . . . . . . . .294
8.2.4 Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .296
8.3 Battery Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .296
8.3.1 High-Capacity (Model WA3006). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .296
8.3.2 Super High-Capacity (Model WA3010) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .302
8.4 Scanner/Imager Model Numbers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .308
8.5 Scanner Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .308
8.5.1 SE1223HP, LR And SE955HP Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .308

WORKABOUT PRO3 with Windows Mobile 6.1 User Manual ix

 Contents

8.5.2 SE1524ER Scanner Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .311

8.5.3 EV15 Imager Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .314
8.5.4 SX5400* Imager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .315
8.5.5 HHP5180 Imager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .317

Appendix A: Summit Client Utility (SCU)

A.1 SCU Tabs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1
A.2 Main Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1
A.3 Profile Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2
A.3.1 SCU Security Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4
A.3.2 EAP Credentials. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6
A.3.3 ThirdPartyConfig. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6
A.4 Status Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-7
A.5 Diags Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-7
A.6 Global Settings Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-8

Appendix B: Port Pinouts

B.1 LIF (Low Insertion Force) Port Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-1
B.2 Tether Port Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-2
B.3 Battery Contact Pinout –– WA3006 & WA3010 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-3
B.4 Positive Female Battery Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-3

Appendix C: Teklogix Imagers Applet

C.1 Required Applets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-1
C.2 Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-1
C.2.1 Predefined Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-2
C.2.2 Bar Code Predefined Presets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-2
C.2.3 Bar Code Decoding Camera Predefined Presets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-3
C.2.4 Image Capture Predefined Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-4
C.3 Using The Teklogix Imagers Applet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-4
C.3.1 Configuring The Image Capture Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-4
C.3.2 Selecting A Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-5
C.3.3 Setting The Active Preset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-5
C.3.4 Viewing A Preset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-5
C.3.5 Creating A Custom Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-6
C.3.6 Modifying A Custom Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-7
C.3.7 Removing A Custom Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-8
C.4 Configuring The Bar Code Decoding Camera Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-8
C.4.1 Selecting A Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-9

x WORKABOUT PRO3 with Windows Mobile 6.1 User Manual

 Contents

C.4.2 Setting The Active Preset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-9

C.4.3 Viewing A Preset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-10
C.4.4 Creating A Custom Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-10
C.4.5 Modifying A Custom Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-11
C.4.6 Removing A Custom Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-12
C.4.7 Configuring The Bar Code Decoding Symbologies . . . . . . . . . . . . . . . . . . . . . . . . . . C-12
C.4.8 Setting The Active Preset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-13
C.4.9 Viewing A Preset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-13
C.4.10 Creating A Custom Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-14
C.4.11 Modifying A Custom Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-15
C.4.12 Removing A Custom Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-16
C.4.13 Configuring Symbologies in the Teklogix Imagers Applet . . . . . . . . . . . . . . . . . . . C-16
C.4.14 Filter Tab –– Manipulating Bar Code Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-17
C.4.15 Translation Tab –– Configuring Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-19
C.4.16 Advanced Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-19
C.5 Teklogix Scanners Applet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-21

Appendix D: Bar Code Settings

D.1 Scanner Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-1
D.2 Decoded (Internal) Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-2
D.2.1 Options –– Decoded (Internal) Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-2
D.2.2 Advanced Options –– Decoded (Internal) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-3
D.2.3 Decoded (Internal) 2D Scanning Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-5
D.2.4 Data Options —— Decoded (Internal) Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-5
D.2.5 Code 39 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-6
D.2.6 Code 128. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-9
D.2.7 EAN 13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-10
D.2.8 EAN 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-10
D.2.9 UPC A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-11
D.2.10 UPC E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-11
D.2.11 UPC/EAN Shared Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-12
D.2.12 Code 93 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-13
D.2.13 Codabar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-14
D.2.14 MSI Plessey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-14
D.2.15 Interleaved 2 of 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-16
D.2.16 Discrete 2 of 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-16
D.2.17 RSS Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-17
D.2.18 Composite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-18
D.2.19 PDF-417. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-18

WORKABOUT PRO3 with Windows Mobile 6.1 User Manual xi

 Contents

D.2.20 Micro PDF-417 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-19

D.3 Decoded (HHP). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-20
D.3.1 Options –– Decoded (HHP). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-20
D.3.2 Advanced Options –– Decoded (HHP). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-20
D.3.3 Code 39 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-22
D.3.4 Trioptic Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-23
D.3.5 Code 128. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-23
D.3.6 EAN 13 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-24
D.3.7 EAN 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-25
D.3.8 UPC A Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-25
D.3.9 UPC E Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-26
D.3.10 UPC/EAN Shared Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-27
D.3.11 Code 93 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-27
D.3.12 Codabar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-27
D.3.13 MSI Plessey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-29
D.3.14 Code 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-29
D.3.15 Interleaved 2 of 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-30
D.3.16 Matrix 2 of 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-31
D.3.17 IATA 2 of 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-31
D.3.18 Discrete 2 of 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-32
D.3.19 Telepen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-32
D.3.20 RSS Code (Reduced Space Symbology) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-33
D.3.21 PosiCode (Reduced Space Symbology). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-33
D.3.22 Composite. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-34
D.3.23 TLC-39 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-35
D.3.24 PDF-417 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-35
D.3.25 Micro PDF-417 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-35
D.3.26 Code 16K . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-36
D.3.27 Code 49 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-36
D.3.28 Codablock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-37
D.3.29 2D Data Matrix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-37
D.3.30 2D QR Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-38
D.3.31 2D Maxicode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-38
D.3.32 2D Aztec . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-39
D.3.33 Postal: PlaNET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-39
D.3.34 Postal: PostNET. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-39
D.3.35 Postal: Australian. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-40
D.3.36 Postal: Canadian . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-40
D.3.37 Postal: China . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-40

xii WORKABOUT PRO3 with Windows Mobile 6.1 User Manual

 Contents

D.3.38 Postal: Japanese . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-41

D.3.39 Postal: Kix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-41
D.3.40 Postal: Korean. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-41
D.3.41 Postal: Royal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-42
D.4 Decoded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-42
D.4.1 Options –– Decoded Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-43
D.4.2 Advanced Options –– Decoded Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-43
D.4.3 Code 39 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-44
D.4.4 Code 128. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-45
D.4.5 EAN 13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-47
D.4.6 EAN 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-47
D.4.7 UPCA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-48
D.4.8 UPC E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-48
D.4.9 UPC/EAN Shared . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-49
D.4.10 Code 93 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-50
D.4.11 Codabar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-50
D.4.12 MSI Plessey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-51
D.4.13 Code 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-52
D.4.14 Interleaved 2 of 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-53
D.4.15 Matrix 2 of 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-54
D.4.16 Discrete 2 of 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-54
D.4.17 Telepen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-55
D.4.18 RSS Code (Reduced Space Symbology) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-55
D.4.19 Composite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-56
D.4.20 TLC-39. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-57
D.4.21 PDF-417. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-58
D.4.22 Micro PDF-417 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-58
D.4.23 Codablock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-59

WORKABOUT PRO3 with Windows Mobile 6.1 User Manual xiii

INTRODUCTION 1
1.1 About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.2 Text Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.3 WORKABOUT PRO3 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.3.1 The WORKABOUT PRO3 C Hand-Held . . . . . . . . . . . . . . . . . . . . . . . 6
1.3.2 The WORKABOUT PRO3 S Hand-Held . . . . . . . . . . . . . . . . . . . . . . . 7

WORKABOUT PRO3 with Windows Mobile 6.1 User Manual 1

 Chapter 1: Introduction
About This Manual

1.1 About This Manual

This manual describes how to configure, operate and maintain the WORKABOUT PRO3
(Model Numbers 7527C-G2 and 7527S-G2) hand-held computer.
Chapter 1: Introduction
provides a basic overview of the WORKABOUT PRO3 hand-held.
Chapter 2: Basic Checkout
describes the steps required to get the unit ready for operation.
Chapter 3: Get To Know WORKABOUT PRO3
describes the features and outlines how to charge and maintain the battery. This chapter also
provides information about indicators, SD/MMC card installation and general maintenance.
Chapter 4: Working With Windows Mobile 6.1
describes the Microsoft® Windows Mobile 6.1 Today screen and how to use it. This chapter
also outlines basics like moving around a window, displaying menus, and so on.
Chapter 5: Programs
provides a description of the Windows Mobile 6.1 Programs options and how to use them.
Chapter 6: Settings
provides details about Windows Mobile 6.1 Settings options and how to use them.
Chapter 7: Peripheral Devices & Accessories
describes the peripherals and accessories available for your hand-held.
Chapter 8: Specifications
details radio, hand-held computer, scanner and battery specifications.
Appendix A: Summit Client Utility (SCU)
provides details about the Summit Client Utility (SCU) screens.
Appendix B: Port Pinouts
describes port pinouts.
Appendix C: Teklogix Imagers Applet
describes the Teklogix Imagers applet and how to use it.
Appendix D: Bar Code Settings
describes the bar codes supported by the scanners and imagers available for
the WORKABOUT PRO3.

WORKABOUT PRO3 with Windows Mobile 6.1 User Manual 3

Chapter 1: Introduction
Text Conventions

1.2 Text Conventions

Note: Notes highlight additional helpful information.

Important: These statements provide particularly important instructions

or additional information that is critical to the operation of
the equipment.

Warning: These statements provide critical information that may prevent physical
injury, equipment damage or data loss.

1.3 WORKABOUT PRO3 Features

Important: For all safety, regulatory and warranty information, refer to the ‘‘WORKA-
BOUT PRO Hand-Held Computer Regulatory & Warranty Guide’’, PN
8000126.

The WORKABOUT PRO3 is a ruggedized hand-held personal computer that can be ordered
with two possible operating systems: Windows Mobile 6.1 Professional with a phone option
or Windows Mobile 6.1 Classic. This hand-held is intended for use in commercial and light
industrial applications with a focus on real time wireless data transactions. All possible bar
code input methodologies are supported by one of a variety of scanners available. Optimiza-
tion for specific operational environments is supported with a wide range of peripheral
options and carrying accessories.

Note: For a complete list of WORKABOUT PRO3 specifications, refer to ““Hand-Held

Computer Specifications”” on page 287

Model Variants
•• WORKABOUT PRO3 C –– Model 7527C-G2
•• WORKABOUT PRO3 S –– Model 7527S-G2
Platform
•• PXA270M @ 624 MHz, 32 bit RISC CPU
•• 1024 MB Flash ROM, 256 MB RAM

4 WORKABOUT PRO3 with Windows Mobile 6.1 User Manual

 Chapter 1: Introduction
WORKABOUT PRO3 Features

Operating System
•• Microsoft Windows Mobile 6.1 Professional
•• Microsoft Windows Mobile 6.1 Classic
Multi-Media Chipset
•• NVIDIAGoForce 4000 Multi-Media Processor
Real-Time Clock
•• CPU independent RTC capable of maintaining the system date and time for at least 3
months with a fully charged backup battery
User Interface
•• Color Touchscreen Display 3.6 in. (9.144 cm) diagonal
- Full VGA 480 x 640 resolution
- Transflective, portrait mode TFT
- Adjustable Backlight
•• Touchscreen
- Passive stylus or finger operation
- Signature capture
•• Keyboards
- Full Alpha-Numeric (C model)
- Numeric (S model)
- Ergonomically enhanced for ambidextrous, one-hand operation
- Backlit, high durability hard-capped keys
Wireless Communication
Optional expansion modules for:
•• 802.11b/g (via Compact Flash) operating in the 2.4GHz band:
- Supports IEEE 802.11b data rates of 1,2,5.5 and 11Mbps using Direct Sequence
Spread Spectrum (DSSS)
- Supports IEEE 802.11g data rates of 6,9,12,24,36,48 and 54Mbps,using Orthagonal
Frequency Division Multiplexing (OFDM) base band modulation
•• GSM/GPRS EDGE (via expansion interface)
- Quad-Band –– 850/900/1800/1900 MHz Voice and Data

WORKABOUT PRO3 with Windows Mobile 6.1 User Manual 5

Chapter 1: Introduction
The WORKABOUT PRO3 C Hand-Held

- GPRS Class B, Multi-Slot Class 12

- EGPRS Class B, Multi-Slot Class 12
•• UMTS/HSDA (via expansion interface)
- Triple-Band –– 850/1900/2100 MHz Voice and Data
•• Integrated Bluetooth class II, ver 1.2
- Working Range: 16.4 ft.to 32.81 ft. (5m to 10m)

Note: 802.11b/g, GSM, and Bluetooth are available simultaneously.

1.3.1 The WORKABOUT PRO3 C Hand-Held

Figure 1.1 WORKABOUT PRO3 C with Alphanumeric Keyboard

6 WORKABOUT PRO3 with Windows Mobile 6.1 User Manual

1.3.2 The WORKABOUT PRO3 S Hand-Held
Figure 1.2 WORKABOUT PRO3 S with QWERTY Keyboard
Chapter 1: Introduction
The WORKABOUT PRO3 S Hand-Held

Figure 1.3 WORKABOUT PRO3 S with Numeric Keyboard

Figure 1.4 Phone Labels

Send End

Note: The [Send] and [End] phone keys printed on the hand-held shown in the sample
above are useful for units equipped with Windows Mobile 6.1 Professional that sup-
port the phone feature. Refer to ““Send & End Calls Using the WORKABOUT PRO3
Keyboard”” on page 24 for details.

8 WORKABOUT PRO3 with Windows Mobile 6.1 User Manual

BASIC CHECKOUT 2
2.1 Preparing the WORKABOUT PRO3 for Operation . . . . . . . . . . . . . . . . . . 11
2.1.1 The Main Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.1.1.1 Charging the Main Battery . . . . . . . . . . . . . . . . . . . . . 11
2.1.2 The Backup Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.1.2.1 Backup Battery Gas Gauge . . . . . . . . . . . . . . . . . . . . . 12
2.2 Turning the WORKABOUT PRO3 On and Off . . . . . . . . . . . . . . . . . . . . 12
2.2.1 Installing the Battery and Switching the Unit On . . . . . . . . . . . . . . 12
2.2.2 Switching the Unit Off (Suspend) . . . . . . . . . . . . . . . . . . . . . . 13
2.3 Connecting the WORKABOUT PRO3 to a PC . . . . . . . . . . . . . . . . . . . . 14
2.3 Connecting the WORKABOUT PRO3 to a PC . . . . . . . . . . . . . . . . . . . . 14
2.4 Data Transfer Between the PC & the Hand-Held . . . . . . . . . . . . . . . . . . . 14
2.4.1 Using Microsoft® ActiveSync® . . . . . . . . . . . . . . . . . . . . . . . 14
2.4.2 Using Microsoft® Vista® . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.5 Aligning (Calibrating) the Touchscreen . . . . . . . . . . . . . . . . . . . . . . . . 15
2.6 The Getting Started Centre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.7 Setting Up a RA2041 Radio––Summit Client Utility . . . . . . . . . . . . . . . . . . 16
2.7.1 Assigning the IP Address. . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2.7.2 Using the SCU to Connect to the WLAN . . . . . . . . . . . . . . . . . . 17
2.8 The Phone (Windows Mobile 6.1 Professional Only) . . . . . . . . . . . . . . . . . 20
2.8.1 The Phone Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2.8.1.1 Send & End Phone Calls Using the Phone Keypad. . . . . . . . . 20
2.8.1.2 Make a Conference Call. . . . . . . . . . . . . . . . . . . . . . . 21
2.8.1.3 Receive an Incoming Call. . . . . . . . . . . . . . . . . . . . . . 21
2.8.1.4 Program Speed Dial . . . . . . . . . . . . . . . . . . . . . . . . . 21
2.8.2 Send & End Calls Using the WORKABOUT PRO3 Keyboard . . . . . . . 24
2.8.3 Managing Phone Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 26
2.8.3.1 Phone Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
2.8.3.2 Security Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
2.8.3.3 Services Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
2.8.3.4 Network Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 9

 2.8.3.5 Data Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
2.8.3.6 Bands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
2.9 Resetting the WORKABOUT PRO3 Hand-Held . . . . . . . . . . . . . . . . . . . . 31
2.9.1 Performing a Warm Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
2.9.2 Performing a Cold Reset to the Windows Mobile 6.1 OS . . . . . . . . . . 32

10 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 2: Basic Checkout
Preparing the WORKABOUT PRO3 for Operation

2.1 Preparing the WORKABOUT PRO3 for Operation

2.1.1 The Main Battery
Before charging the battery, it is critical that you review the battery safety guidelines in the
““WORKABOUT PRO Hand-Held Computer Warranty & Regulatory Guide””, PN 8000126.
The WORKABOUT PRO3 C and WORKABOUT PRO3 S can be powered with one of the
following lithium-ion battery packs:
•• High-Capacity –– Model No. WA3006, and
•• Super High-Capacity –– Model No. WA3010

2.1.1.1 Charging the Main Battery

Important: Before opening the battery cover on your WORKABOUT PRO3, press the
Power button to turn off the hand-held.

Important: Before replacing a battery, please read ““Removing the Battery Pack”” on
page 38 and ““Safely Swapping the Main Battery”” on page 38.

Battery packs shipped from the factory are charged to approximately 40% and must be fully
charged prior to use. Batteries can be charged using a variety of chargers and docking sta-
tions along with a WORKABOUT PRO3 internal charger. When using the internal charger,
a suitable power source is required. All chargers and docking stations are described in
Chapter 7: ““Peripheral Devices & Accessories”” beginning on page 245 for details.

Note: If you are powering up a new unit, a warning message may appear on the screen
indicating that the backup battery capacity is low. To recharge the internal battery,
you must fully charge the WORKABOUT PRO3 with the main battery installed in the
unit.

2.1.2 The Backup Battery

To preserve data stored in your WORKABOUT PRO3 while you swap the main battery, the
unit is equipped with an internal backup battery––a replaceable, rechargeable Lithium-Ion
backup battery that can be ordered through Psion Teklogix. The backup battery will supply 5
minutes of continuous power while you install a charged, main battery.
The backup battery is trickle charged from the main battery. Provided that the main battery
contains power, the backup battery will maintain a charge whether the WORKABOUT

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 11

Chapter 2: Basic Checkout
Turning the WORKABOUT PRO3 On and Off

PRO3 is switched on or off, in a docking station or a cradle. Even when the main battery
reaches its Suspend Threshold (refer to ““Suspend Threshold”” on page 167) and the hand-
held shuts down, the backup battery will continue to draw a trickle charge from the main
battery to protect the data stored in the unit until a charged main battery is installed.

Note: The backup battery takes approximately 3 to 4 hours to fully charge from a fully dis-
charged (flat) state, generally the same amount of time it takes to fully charge the
main battery. While you can continue to use the WORKABOUT PRO3, replacing the
main battery while the backup battery is not fully charged is not recommended
because you risk losing the data stored on the unit.

2.1.2.1 Backup Battery Gas Gauge

To safely replace the main battery and preserve the data stored in the WORKABOUT PRO3,
the backup battery should contain a minimum of 80% of its charge capacity. The Battery tab
in the Power applet displays a gas gauge to indicate the charge remaining in the backup
battery from 0 to 100%. To check the backup battery capacity:
•• Tap on Start>Settings and then tap on System tab.
•• Tap on the Power icon.
For more details about replacing batteries, refer to““Removing the Battery Pack”” on page 38
and ““Battery Swap Time”” on page 38.

2.2 Turning the WORKABOUT PRO3 On and Off

2.2.1 Installing the Battery and Switching the Unit On

Important: Before opening the battery cover on your WORKABOUT PRO3, press the
Power button to turn off the hand-held.

•• To unlock the battery cover, turn the left-hand battery fastener to the left, and turn the
right-hand battery fastener to the right. You can either use your fingers or the top of your
stylus to turn the fasteners. (For details about how to lock and unlock the optional safety
battery cover, refer to ““Secure Battery Cover”” on page 259.)
•• Remove the battery cover.
•• Ensure that the ON/OFF switch in the battery compartment is set to ON before inserting
the battery.
•• Snap the charged battery into the unit. Replace the battery cover, and lock the fasteners
in place.

12 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 2: Basic Checkout
Switching the Unit Off (Suspend)

Note: If you are using a docking station or an external power supply, you can insert an
uncharged battery, dock the unit and switch it on.

To switch on the WORKABOUT PRO3:

•• Press and hold down the Power button for at least one second.
•• When the LED flashes green, release the [ENTER] button.
The desktop Today screen is displayed.

Note: If the unit was already in use––the unit may be off (suspend state) –– pressing [ENTER]
‘‘wakes’’ the unit from this state. The screen in which you were working prior to the
suspend state is displayed. ““Wakeup Keys Tab”” on page 168 describes how you can
assign other ‘‘wakeup’’ keys or enable a two-key ‘‘power on’’ sequence.

2.2.2 Switching the Unit Off (Suspend)

•• Press the [FN/BLUE] key, and then press and hold down the [ENTER] key.
A Shutdown screen like the one below is displayed. Each option switches off different ele-
ments of the WORKABOUT PRO3; each shutdown option displays an associated
description.

Choosing Suspend places the hand-held into a power-saving suspend state. In this state, all
radios remain on, but the display, keyboard backlight and processor are switched off. When
the WORKABOUT PRO3 is turned on from this state, operation resumes within a few
seconds in the screen in which you were working prior to suspend.
If you choose Standby, the display is turned off, the keyboard is locked and the touchscreen
is locked. The processor remains on so that any running applications will continue while the

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 13

Chapter 2: Basic Checkout
Connecting the WORKABOUT PRO3 to a PC

hand-held is in a Standby state. In addition, the radios remain on. You should be aware that
because the processor continues to run, Standby mode consumes more power than Suspend
mode.
Keep in mind that only by pressing and holding down the [ENTER] key until the Shutdown
dialog box is displayed can you choose between Suspend and Standby.

2.3 Connecting the WORKABOUT PRO3 to a PC

Note: Refer to Refer to ““Linking A WORKABOUT PRO3 To A PC”” on page 266 for more
details about the desktop docking station and how to link to a PC.

The WORKABOUT PRO3 can be connected to a PC using the desktop docking station.
•• Insert the unit in the desktop docking station.
•• Use a Client USB connector to complete the communication link between the hand-held
and the PC.

2.4 Data Transfer Between the PC & the Hand-Held

Data transfer options vary slightly depending on the type of operating system installed in
your PC. Microsoft® ActiveSync® is PC connectivity software that can be used to connect
your hand-held to PCs running this software. ActiveSync works only with the Windows XP
SP2 operating system or earlier.
If the Microsoft® Vista® operating system is installed in your PC, ActiveSync is not re-
quired to transfer data between your WORKABOUT PRO3 and your PC.
By connecting the WORKABOUT PRO3 to a PC with a cable, you can:
•• View WORKABOUT PRO3 files from Windows Explorer.
•• Drag and drop files between the WORKABOUT PRO3 and the PC in the same way that
you would between PC drives.
•• Back up WORKABOUT PRO3 files to the PC, then restore them from the PC to the
hand-held again, if needed, and so on.

2.4.1 Using Microsoft® ActiveSync®

To install ActiveSync®, follow the step-by-step instructions provided at this website:
http://go.microsoft.com/fwlink/?LinkId=147001

14 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 2: Basic Checkout
Using Microsoft® Vista®

2.4.2 Using Microsoft® Vista®

If you have Windows Vista, your WORKABOUT PRO3 data transfers do not require Active-
Sync. To transfer data between your PC and your hand-held:
•• Tap on Start>Computer to display the drives. Your WORKABOUT PRO3 will be
visible here.
•• Open drives, files and folders as you would on your PC.

2.5 Aligning (Calibrating) the Touchscreen

Refer to ““Aligning (Calibrating) the Touchscreen”” on page 47 for details.

2.6 The Getting Started Centre

The Getting Started centre outlines how to perform basic tasks when initially setting up your
WORKABOUT PRO3. You can access the Getting Started centre from the Today screen, or
you can tap on Start>Programs, and then tap on the Getting Started icon.

Tapping on Getting Started displays a list of the basic setup option you may need to get your
WORKABOUT PRO3 ready for operation.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 15

Chapter 2: Basic Checkout
Setting Up a RA2041 Radio––Summit Client Utility

•• To get instructions about an operation, tap on an option in the Getting Started list.
Follow the instructions provided.

•• Where applicable, a link to an associated screen is provided.Tap on the link to display

the screen and complete your task.
•• To go back to the Getting Started menu, tap on the Back softkey in the taskbar at the
bottom of the screen.

2.7 Setting Up a RA2041 Radio––Summit Client Utility

This section describes the steps required to set up the RA2041 Summit Radio using the
Summit Client Utility (SCU).
To review details about the option within the SCU tabs –– Main, Profile, Status, Diags and
Global Settings –– review Appendix A: ““Summit Client Utility (SCU)””.

2.7.1 Assigning the IP Address

Before launching the SCU, you need to configure the method by which the IP address will
be obtained.
•• Tap on Start>Settings>Connections tab>Wireless Manager icon.
•• In the Wireless Manager dialog box, tap on the Settings button.
In the Configure Network Adaptors dialog box:
•• Tap on Summit WLAN Adapter in the adaptor list.
The Summit WLAN Adapter dialog box is displayed. You have two options:
•• Tap on Use server-assigned IP address to have an address assigned automatically, or

16 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 2: Basic Checkout
Using the SCU to Connect to the WLAN

If you want to use a particular IP address, tap on Use specific IP address, and type the pre-
ferred address.
If you tap on the Name Servers tab, you can statically configure the DNS servers; however,
if you use DHCP for IP address assignment, DNS is usually supplied by the same server that
supplied the IP addresses.

2.7.2 Using the SCU to Connect to the WLAN

This section provides a quick set of steps to create a profile (referred to as a Profile). De-
tailed information about each of the SCU tabs –– Main, Profile, Status, Diags and Global
Settings –– is provided under Appendix A: ““Summit Client Utility (SCU)””.
To launch the SCU so that your hand-held can connect to a wireless LAN:
•• Tap on Start>Programs, and then tap on the SCU icon.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 17

Chapter 2: Basic Checkout
Using the SCU to Connect to the WLAN

•• Tap on the Profile tab.

•• Tap on New to define a new profile.

•• Type a unique name for your configuration using any alpha-numeric combination to
uniquely identify this profile.
•• Tap on OK to return to the Profile tab.
To configure the SSID for the network to which you want to associate:
•• Type an SSID in the text box to the right of SSID. This field is limited to 32 characters.
•• Tap on Commit to save your SSID setting.

Important: To learn more about the other options available in the radio attributes list,
refer to ““Profile Tab”” in Appendix A: ““Summit Client Utility (SCU)””.

To configure authentication and encryption, use the appropriate drop-down menus in the
Profile dialog box, and enter credentials for IEEE 802.1X EAP types or WEP keys by
tapping on the Credentials button just below the drop-down menus.
•• Tap on the EAP type drop-down menu, and choose the appropriate type of authentica-
tion –– LEAP, EAP-FAST, PEAP-MSCHAP,PEAP-GTC and EAP_TLS.
•• Once you’’ve chosen an EAP type, tap on the Credentials button, and type credentials
for IEEE 802.1X EAP types.

Important: Refer to ““SCU Security Capabilities”” and ““EAP Credentials”” in Appendix A:

““Summit Client Utility (SCU)””.

18 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 2: Basic Checkout
Using the SCU to Connect to the WLAN

To configure encryption:
•• Tap on the Encryption drop-down menu, and choose the appropriate type of encryption
–– Manual WEP, Auto WEP, WPA PSK, WPA TKIP, WPA2 PSK, WPA2 AES, CCKM
TKIP, CKIP Manual or CKIP Auto.
If you choose Manual WEP, WPA PSK or WPA2 PSK:
•• Tap on the WEP/PSK Keys button. For Manual WEP, choose up to four static WEP
keys. For PSK, type an ASCII passphrase or hex PSK.
•• Configure any other settings that are supplied by the network administrator for the SSID
to which you will associate.
•• Make certain that you tap on Commit following each change.
Once you’’ve completed the configuration:
•• Tap the Main tab. Tap on the Active Profile drop-down menu –– your new profile will
be listed in the drop-down menu.
When you tap on the profile you created, the 802.11b/g radio module attempts to connect to
the network using the following steps:
1. Associate with SSID.
2. Authenticate to network.
3. If EAP authentication is being used, derive dynamic encryption keys.
4. If DHCP is being used by the network, obtain an IP address.
If the 802.11b/g is not connecting properly:
•• Tap on the Status tab.
The Status dialog box lists the IP and MAC address, and indicates the current state of the
radio, the signal strength, channel and so on.
You can also use the Status screen for DHCP renewal and ICMP Echo Requests (Pings).

Important: For details about the Status dialog box, refer to““Status Tab”” on page A-7 in
Appendix A: ““Summit Client Utility (SCU)””.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 19

Chapter 2: Basic Checkout
The Phone (Windows Mobile 6.1 Professional Only)

2.8 The Phone (Windows Mobile 6.1 Professional Only)

WORKABOUT PRO3s running Windows Mobile 6.1 Professional are equipped with phone
capabilities.

Note: Remember that you can use the Help feature to find more details about phone
options. Help screens are context-sensitive––that is, the help displayed is generally
specific to the dialog box you have opened. To further narrow your search, tap on
the Search softkey in the Help screen, and type the topic about which you require
additional information.

2.8.1 The Phone Keypad

The phone keypad provides phone services like those you use on your cellular phone. You
can use the phone keypad provided with your WORKABOUT PRO3 to, for example, send
and receive phone calls, make conference calls, view a list of your phone calls (call history),
set up speed dial numbers, etc.

2.8.1.1 Send & End Phone Calls Using the Phone Keypad
To display the phone keypad:
•• In the Today screen, tap the Phone softkey in the softkey bar at the bottom of the screen.

Phone settings

Network emergency
number

Directory Assistance

Note: You can also press the Send button on the WORKABOUT PRO3 keyboard to display
the phone keypad providing it’’s been activated. The Send button is located on the
[TAB] key just below the hand-held display to send the phone number; it is labelled
with a green telephone receiver icon.Refer to ““Send & End Phone Calls Using the
Phone Keypad”” on page 20 for details.

20 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 2: Basic Checkout
The Phone Keypad

To send a number:
•• Use the phone keypad to enter the phone number, and tap on Send to dial the phone
number.
To end a phone call:
•• Tap on End key on the phone keypad.

Note: You can also tap on the [End] key on the physical keyboard of the WORKABOUT
PRO3 to end the call providing this key has been activated. The [End] key is mapped
to the [ESC] key just below the hand-held display and is labelled with a red phone
receiver. Refer to ““Send & End Calls Using the WORKABOUT PRO3 Keyboard”” on
page 24 for details.

2.8.1.2 Make a Conference Call

To set up a conference call between yourself and two or more other parties:
•• In the phone keypad, enter the first phone number. Tap on the Send button.
•• While you are connected to the first number, tap on Menu>Hold.
•• Enter the second number. Tap on Send.
•• Tap on Menu>Conference.
•• To add another party, tap on Menu>Hold, enter the number, and then tap
Menu>Conference.
•• Tap on End to disconnect all calls.

2.8.1.3 Receive an Incoming Call

To answer an incoming call:
•• Tap on the Send button located on the [TAB] key on the WORKABOUT PRO3 key-
board. It’’s labelled with a green phone receiver.

2.8.1.4 Program Speed Dial

The phone keypad provides a Speed Dial button for quick access to often used numbers.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 21

Chapter 2: Basic Checkout
The Phone Keypad

•• In the phone keypad, tap on the Speed Dial button to display the speed dial Phone
dialog box.

Speed Dial Number

This dialog box lists the phone numbers and the speed dial key to which the phone number
has been assigned.
•• Tap on the Speed Dial Number (to the left of the phone number you want to dial), or
Tap on the Call softkey; the number is dialed for you.
Using the Phone Keypad to Program a Speed Dial
There are a number of ways to add a speed dial number. You can create a speed dial number
using the Contacts list or by using the Speed Dial button on the phone keypad.
Adding a New Phone Number
•• In the phone keypad, tap on the Speed Dial button.
•• In the speed dial Phone dialog box, tap on Menu>New.

22 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 2: Basic Checkout
The Phone Keypad

•• In the list, choose a contact for a speed dial.

•• Tap on Enter a name, and type a contact name, or tap on a name in the list.

A sequential speed dial key is automatically assigned in the Location field. You can tap on
the Location drop-down menu and change the auto assignment.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 23

Chapter 2: Basic Checkout
Send & End Calls Using the WORKABOUT PRO3 Keyboard

Using the Contact List to Program a Speed Dial

•• Tap Contact in the softkey bar at the bottom of the Today screen.

•• Tap on the Contact to which you want to assign a speed dial number.

•• In the Summary screen, tap on Menu>Add to Speed Dial.

2.8.2 Send & End Calls Using the WORKABOUT PRO3 Keyboard
WORKABOUT PRO3s are equipped with a Send and an End phone buttons. The sample
below illustrates where these phone buttons are located on the QWERTY keyboard. On al-

24 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 2: Basic Checkout
Send & End Calls Using the WORKABOUT PRO3 Keyboard

phanumeric and numeric keyboards, these button are mapped to the [F3] and [F4] function
keys near the top of the keyboard.

Send End

Using these phone keys, you can display the phone keypad and answer, send and terminate
phone calls. If you press the Send or End buttons with no result, you may first need to acti-
vate them.
Activating the Send and End Keyboard Phone Buttons
To activate the phone function of these keys:
•• Tap on Start>Settings>System tab>About Device icon.
•• Tap on the Experience tab.

•• If it’’s not chosen by default, choose Psion Teklogix Settings in the drop-down menu at
the top of the screen. The checkbox next to ‘‘Enable Phone keys (Send and End) in
place of the [Tab] and [Esc] keys’’ should be checked automatically. If not, check it and
tap on OK.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 25

Chapter 2: Basic Checkout
Managing Phone Settings

2.8.3 Managing Phone Settings

You can adjust phone settings such as the ring type and tone, choose phone services such as
barring calls, and you can also determine network selections. There are a number of ways
you can access phone settings.
•• In the Navigation Bar, tap on the Phone Settings hotkey. In the pop-up Phone bubble,
tap on Settings, or
•• Tap on Start>Settings>Phone icon.
Phone Settings Hotkey

Tap on Settings

Note: If the phone keypad is opened, tap on Menu>Options to display the Phone Settings
dialog box.

2.8.3.1 Phone Tab

Ring Type and Ring Tone
Ring Type allows you to tailor the type of ring used for incoming calls. The Ring Tone drop-
down menu allows you to determine the ring tone of incoming phone calls.
Keypad
This option allows you to determine the type of sound that keypad keys emit as you tap
them. You can also turn off keypad sounds.

26 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 2: Basic Checkout
Managing Phone Settings

2.8.3.2 Security Tab

Tap in the checkbox

(add a checkmark)
to enable PIN Security.

This option allows you to assign a PIN (Personal Identification Number) so that your hand-
held is protected from unauthorized use. Your SIM card manufacturer provides the default
PIN which you can change in this field.
Changing a PIN
•• Tap on the Change PIN button and use the phone keypad to enter your existing SIM
card PIN. Tap on the [Enter] button in the phone keypad.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 27

Chapter 2: Basic Checkout
Managing Phone Settings

Important: If you enter an incorrect PIN, a message is displayed letting you know that
you’’ll need to reenter the correct value.
You have five chances to enter the correct PIN. If you exceed this number,
the SIM will be disabled automatically. You will be asked to enter a PUK
(Personal Unlocking Key). Your system administrator will be able to provide
this information.

Once you’’ve entered the correct PIN, a new screen appears asking that you enter you
new PIN.

•• Type your new PIN –– a number consisting of between 4 and 8 digits in length. Tap
on Enter.
A new message lets you know that you need to confirm your new PIN.
•• Retype your new PIN. Tap on [Enter] when you’’re finished.
Enabling PIN Security
To activate PIN security:
•• Tap in the checkbox to the left of Require PIN when phone is used.
When security is enabled, you will be prompted to enter a PIN before you are allowed to use
the phone.

Note: Whenever this option is enabled or disabled, you will be asked to enter your PIN.

28 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 2: Basic Checkout
Managing Phone Settings

2.8.3.3 Services Tab

The Services tab allows you to customize the behaviour of your phone. You can, for exam-
ple, block all incoming calls, tailor to whom your caller ID will be transmitted, set up call
forwarding and so on.
•• Tap on the service you want to set up. Tap on Get Settings.
The service dialog boxes allow you to tailor your available services to meet your require-
ments. Remember that when a particular service dialog box you’’ve chosen is displayed, you
can always tap on Start>Help to get additional information.
Voice Mail Setup
If your service includes Voice Mail, a temporary passcode is automatically assigned. It is
mailed to you as a text message.
•• Tap on Start>Messaging to display your temporary passcode.
To activate your voice mail:
•• From a land line, dial your wireless phone number.
•• Allow the WORKABOUT PRO3 to ring until it is automatically picked up by the voice
mail service. At the greeting, type #.
You will be prompted to enter your temporary passcode. A tutorial will lead you through
the voice mail setup. When you’’ve assigned your personalized passcode, keep it in a
secure place.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 29

Chapter 2: Basic Checkout
Managing Phone Settings

2.8.3.4 Network Tab

This dialog box identifies your current network, and allows you to view available networks
and determine the order in which other preferred networks will be accessed if the current
one is unavailable.You can also specify manual or automatic network changes, and you can
add a network.

2.8.3.5 Data Tab

This screen is used to configure the connection to the ISP. You can select a network connec-
tion from the drop-down menu.
By default the connection uses CHAP (Challenge Handshake Authentication Protocol);
however, if your ISP does not support CHAP, tapping in the box to the left of PAP only
authentication for: directs the connection to use PAP (Password Authentication Protocol)
instead.

Note: If your are not using PAP, the hand-held automatically defaults to CHAP.

30 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 2: Basic Checkout
Resetting the WORKABOUT PRO3 Hand-Held

2.8.3.6 Bands

By default, all frequency bands are enabled. Bands should not be disabled without knowl-
edge about which bands are used by your network; an incorrect setting will prevent the
WWAN modem from finding the network.

2.9 Resetting the WORKABOUT PRO3 Hand-Held

There are two types of reset available: warm and cold reset.

2.9.1 Performing a Warm Reset

On a WORKABOUT PRO3 running the Windows Mobile operating system, a warm reset
completely reloads and restarts the operating system. Registry settings, installed programs
and any data files that reside in flash memory are all preserved through the reset.
Files and data stored in the RAM Drive partition are not preserved during a reset. To protect
files stored in the RAM Drive through a reset procedure, you must create a Total Recall
profile (refer to ““Total Recall”” on page 186) and store it on the flash (““My Device””) file
system.
•• Press and hold down the [FN/BLUE] key and the [ENTER] key simultaneously for a
minimum of two seconds. When the screen goes blank, release the keys.

Note: You do not need to reset your WORKABOUT PRO3 after configuring the radio.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 31

Chapter 2: Basic Checkout
Performing a Cold Reset to the Windows Mobile 6.1 OS

2.9.2 Performing a Cold Reset to the Windows Mobile 6.1 OS

A cold reset in Windows Mobile is almost identical to a warm reset, except that some lower
level hardware (PCon) is also reset before the operating system boots. For this reason, a cold
reset should only be used in rare, critical situations.
To perform a cold reset and launch the Windows Mobile 6.1 operating system (bypassing
the BooSt menu):
•• Press and hold down the [SCAN] [FN/BLUE] and [ENTER] keys simultaneously for a
minimum of two seconds.
After a cold reset, the BooSt menu appears, listing possible BooSt commands.
•• Type 1 to load the Windows Mobile 6.1 operating system.

32 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

GET TO KNOW WORKABOUT PRO3 3
3.1 Features of the WORKABOUT PRO3 . . . . . . . . . . . . . . . . . . . . . . . . . 35
3.2 The Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
3.2.2 Removing the Battery Pack . . . . . . . . . . . . . . . . . . . . . . . . . 38
3.2.3 Battery Swap Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
3.2.3.1 Safely Swapping the Main Battery . . . . . . . . . . . . . . . . . 38
3.2.4 Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
3.2.4.1 Chargers and Docking Stations . . . . . . . . . . . . . . . . . . . 39
3.3 Switching the Hand-Held On and Off . . . . . . . . . . . . . . . . . . . . . . . . . 40
3.4 The Keyboards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
3.4.1 The WORKABOUT PRO3 Keyboard . . . . . . . . . . . . . . . . . . . . 41
3.4.2 Modifier Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
3.4.2.1 Activating Modifier Keys & the Shift-State Indicator . . . . . . . 41
3.4.2.2 Locking Modifier Keys . . . . . . . . . . . . . . . . . . . . . . . 42
3.4.3 The Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
3.4.6 Numeric Keyboard –– Accessing Alpha Keys . . . . . . . . . . . . . . . . 45
3.4.6.1 Choosing a Single Alpha Character. . . . . . . . . . . . . . . . . 45
3.4.6.2 Creating Uppercase Letters . . . . . . . . . . . . . . . . . . . . . 46
3.4.6.3 Choosing Multiple Alpha Characters . . . . . . . . . . . . . . . . 46
3.4.7 The Keypad Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
3.5 The Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
3.5.1 Adjusting the Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
3.5.2 Aligning (Calibrating) the Touchscreen . . . . . . . . . . . . . . . . . . . 47
3.6 Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
3.6.1 The LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
3.7 Audio Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
3.7.1 Adjusting Speaker Volume . . . . . . . . . . . . . . . . . . . . . . . . . . 50
3.8 Monitoring the Battery and Maximizing Run Time . . . . . . . . . . . . . . . . . . 50
3.8.1 Storing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
3.9 Uploading Data in a Docking Station . . . . . . . . . . . . . . . . . . . . . . . . . 51
3.10 Bluetooth Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 33

 3.10.1 Pairing a Bluetooth Device . . . . . . . . . . . . . . . . . . . . . . . . . 52
3.11 Inserting the SD/MMC Card and SIM Card . . . . . . . . . . . . . . . . . . . . . . 55
3.11.1 Inserting and Removing the Card . . . . . . . . . . . . . . . . . . . . . . 55
3.12 General Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
3.12.1 Caring for the Touchscreen . . . . . . . . . . . . . . . . . . . . . . . . . 57
3.12.2 Cleaning the WORKABOUT PRO3 . . . . . . . . . . . . . . . . . . . . . 57

34 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 3: Get To Know WORKABOUT PRO3
Features of the WORKABOUT PRO3

3.1 Features of the WORKABOUT PRO3

Figure 3.1 Front of WORKABOUT PRO3
Speaker

LED
(Light Emitting Diode)

Microphone Port

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 35

Chapter 3: Get To Know WORKABOUT PRO3
Features of the WORKABOUT PRO3

Figure 3.2 Back of WORKABOUT PRO3

Stylus End Cap

(pointing tool)

Back Cover

Battery Cover

Battery Latches

36 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 3: Get To Know WORKABOUT PRO3
The Batteries

Figure 3.3 Ports

Tether Port
Beeper Port Low Insertion
Force Port (LIF)

DC IN Socket

3.2 The Batteries

The hand-held operates with a Lithium-Ion battery pack. Preparing the unit for operation re-
quires that a battery pack be charged and installed in the WORKABOUT PRO3.
Two levels of battery packs are available for the WORKABOUT PRO3:
•• High-Capacity –– Model No. WA3006, and
•• Super High-Capacity –– Model No. WA3010

3.2.1 Battery Safety

Important: Before attempting to install, use or charge the battery pack, it is critical that
you review and follow the important safety guidelines in the quick reference
guide entitled ‘‘WORKABOUT PRO Hand-Held Computer Regulatory &
Warranty Guide’’, PN 8000126.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 37

Chapter 3: Get To Know WORKABOUT PRO3
Removing the Battery Pack

3.2.2 Removing the Battery Pack

Important: Always switch the unit off before opening the battery cover to remove the
battery. When the cover is removed, a power-off switch is automatically acti-
vated and the unit power is switched off; if the battery cover is opened while
the hand-held is still powered on, the unit may reboot. Any active sessions
may be lost.
Keep in mind also that while the battery is being installed, the WORKA-
BOUT PRO3 backup battery will save the current data for up to 5 minutes.

Refer to ““Installing the Battery and Switching the Unit On”” on page 12.

3.2.3 Battery Swap Time

Assuming the default power saving parameters and battery reserve level have not been al-
tered, battery swap time is approximately 5 minutes——you will not lose data if the battery is
replaced within this time frame.
To protect data, the safest place to store data is on a SD/MMC memory card or externally to
the device on a USB memory stick or on a PC.
The Suspend Threshold feature allows you to determine the battery capacity at which the
hand-held will be shut down. If left at the default value, Maximum Operating Time, the unit
will run until the battery is completely empty; the RAM is only backed up for a short period
of time. If you choose Maximum Back Time, the hand-held shuts off with more energy left in
the battery so RAM can be backed up for a longer period of time.
(Refer to ““Suspend Threshold”” on page 167 for details about reserving battery power for
data backup purposes.)

3.2.3.1 Safely Swapping the Main Battery

There are a few steps you need to take to ensure that no data is lost during a battery swap.
First, you need to make certain that the backup battery is holding at least 80% of its charge
capacity. This information is displayed in the Battery tab.
•• Tap on Start>Settings>System tab and then tap on the Power icon.
Check the Backup battery gas gauge to determine the battery charge remaining.
If the backup battery charge capacity is less than 80%:
•• Insert the WORKABOUT PRO3 in a docking station or cradle to top up the power
supply before removing the main battery from the unit.

38 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 3: Get To Know WORKABOUT PRO3
Charging the Battery

Important: Before opening the battery cover on your WORKABOUT PRO3 to remove
the battery, you must turn press the Power button to turn off the hand-held.

3.2.4 Charging the Battery

Batteries shipped from the factory are charged to approximately 40% of capacity. They must
be fully charged prior to use.
Keep in mind also that, along with the main battery, the WORKABOUT PRO3 is equipped
with an internal, backup battery that preserves data stored on the unit while the main battery
is swapped.

Important: The backup battery is trickle charged from the main battery. To maximize
battery life, avoid excessive discharging and recharging of the backup battery
by keeping the main battery fully charged.
IF YOU ARE POWERING UP A NEW UNIT, a warning message may
appear on the screen indicating that the backup battery capacity is low. To
recharge the backup battery, you must fully charge the WORKABOUT PRO3
with the main battery installed in the unit.

3.2.4.1 Chargers and Docking Stations

Important: FOR DETAILED INFORMATION about chargers and docking stations,

refer to Chapter 7: ““Peripheral Devices & Accessories””.

Lithium-Ion battery packs must be charged before use. These batteries can be charged with a
variety of chargers and docking stations. These include:
•• AC wall adaptor (Model # PS1050-G1) –– operates as an AC power source and when
plugged in, also charges the battery installed in the unit.
•• Desktop Docking Station (Model # WA4003-G2) –– operates as both a charger and a
docking station. Operating as a charger, both the battery installed in the hand-held and a
spare battery can be charged simultaneously.
•• Quad Docking Station –– (Model # WA4204-G2 for WORKABOUT PRO3 C & Model
# WA4304-G2 for WORKABOUT PRO3 S) can charge the battery of up to four
WORKABOUT PRO3s inserted in the docking station.
•• Single Battery Charger (Model # WA3001-G1) –– charges a single battery.
•• Quad Battery Charger (Model # WA3004-G1) –– charges up to four spare High-Capacity
or Super High-Capacity WORKABOUT PRO3 battery packs.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 39

Chapter 3: Get To Know WORKABOUT PRO3
Switching the Hand-Held On and Off

It can take up to 4 hours to charge a battery. The WORKABOUT PRO3 intelligent charging
system protects the battery from over-charging by terminating the charge process when the
battery is at maximum capacity.

Note: Refer to ““Monitoring the Battery and Maximizing Run Time”” on page 50 for addi-
tional information about the battery.

Important: To avoid damaging the battery, chargers will not begin the charge process
until the battery temperature is between 0° C to 45 °C (32° F to 113° F).

3.3 Switching the Hand-Held On and Off

Switching On the WORKABOUT PRO3
•• Press and hold down the Power button for at least two seconds.
•• When the LED flashes green, release the Power button.
The startup Today screen is displayed.

Note: If the WORKABOUT PRO3 is in suspend state, pressing [ENTER] ‘‘wakes’’ the unit
from this state. The screen in which you were working before the computer entered
suspend state is displayed.
““Wakeup Keys Tab”” on page 168 describes how you can assign other ‘‘wakeup’’ keys
or enable a two-key ‘‘power on’’ sequence.

Switching Off the WORKABOUT PRO3 (Suspend)

Important: Keep in mind that turning off the WORKABOUT PRO3 does not result in a
complete reboot; rather, the unit enters a power-saving, ““suspend”” state.
When the unit is turned on from suspend state, operation resumes within a
few seconds.

To switch off the WORKABOUT PRO3:

•• Press the Power button.

40 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 3: Get To Know WORKABOUT PRO3
The Keyboards

3.4 The Keyboards

3.4.1 The WORKABOUT PRO3 Keyboard
This hand-held computer is available in two models, C and S. The WORKABOUT PRO3 C
model is available with an alphanumeric keyboard; the WORKABOUT PRO3 S model is
available with either a QWERTY or numeric keyboard.
Most of the keys on these keyboards operate much like a desktop computer. Where a key or
key function is not consistent with the PC keyboard, the differences are noted.
The WORKABOUT PRO3 is equipped with a Power button that allows you to switch the
unit on and to shut down the unit to Suspend or Standby mode. For details about the Power
button, refer to ““Turning the WORKABOUT PRO3 On and Off”” on page 12.
The [FN/BLUE] and [FN/ORANGE] modifier keys provide access to additional keys and
system functions. These functions are colour coded in orange and blue print above the key-
board keys.

Note: Almost all keys can be reprogrammed to suit your requirements.

3.4.2 Modifier Keys

The [SHIFT], [CTRL], [ALT], [FN/BLUE] and [FN/ORANGE] keys are modifier keys.
Pressing a modifier key changes the function of the next key pressed. For example, on a
WORKABOUT PRO3 C, a square bracket is printed in orange print above the [G] key.
Pressing the [FN/ORANGE] key followed by the [G] key displays a square bracket rather
than the letter G.
The [SHIFT], [CTRL] and [ALT] keys operate much like a desktop keyboard except that
they are not chorded (two keys held down simultaneously). The modifier key must be
pressed first followed by the key whose function you want modified.

3.4.2.1 Activating Modifier Keys & the Shift-State Indicator

When a modifier key is pressed, it is represented in the shift-state indicator icon in the
softkey bar at the bottom of the screen, making it easier to determine whether or not a modi-
fier key is active. If the shift-state indicator icon is not visible (you can only see the soft
keyboard icon), you may need to take a few steps to display the shift-state indicator icon.
•• Tap on Start>Settings followed by the Buttons icon.
•• Tap on the One Shots tab at the bottom of the screen.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 41

Chapter 3: Get To Know WORKABOUT PRO3
Modifier Keys

•• Tap in the check box next to Show modifier key state to display the shift-state indicator
icon.
Figure 3.4 Shift-State Indicator Icon

Shift-State Indicator Icon replaces

Soft Keyboard Icon.

Soft Keyboard Icon

3.4.2.2 Locking Modifier Keys

Note: The locking behaviour of the modifier keys can be changed so that, for example,
pressing a modifier key once will lock the key ‘‘on’’. Refer to ““One Shots”” on page 127
for details. Note too that by default, the [FN/ORANGE] key is locked ‘‘on’’ when
pressed only once.

When a modifier key is locked ‘‘on’’, it will remain active until it is pressed again to unlock
or turn it off.
To help you identify when a modifier key is locked ‘‘on’’, the key is represented in the shift-
state indicator icon with a black frame around it.
Figure 3.5 Shift-State Indicator Icon –– Locked Modifier Key

Once a modifier key is unlocked or turned off, it is no longer displayed in the shift-state in-
dicator icon.

42 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 3: Get To Know WORKABOUT PRO3
The Keys

3.4.3 The Keys

The [SHIFT] Key
The [SHIFT] key is used to display uppercase alpha characters and provide access to the
symbols above the numeric keys. You can lock this key ‘‘on’’ so that when you press an alpha
key, an upper case character is displayed. When you press a numeric key, the associated
symbol on the numeric key is displayed on the screen.
If you press the [SHIFT] key twice, it is locked ‘‘on’’ essentially acting as a [CAPS] key, dis-
playing uppercase characters. In this state, if you type a numeric key, the number rather than
the symbol above it is displayed. Press [SHIFT] again to turn the [CAPS] function off.
The Arrow Keys
The grey Arrow keys are located near the top of the keyboard, directly below the [SCAN]
bar. The arrow keys move the cursor around the screen––up, down, left and right. The cursor
is the flashing box or underline character that indicates where the next character you type
will appear.
The [BKSP/DEL] Key
The [BKSP] key (sometimes referred to as destructive backspace) moves the cursor one
character to the left, erasing the incorrectly entered key stroke.
The [DEL] key ([FN/BLUE] [BKSP]) erases the character at the cursor position.
The [CTRL] and [ALT] Keys
The [CTRL] and [ALT] keys modify the function of the next key pressed and are application
dependent. These keys are printed in blue type on the keys to the left and right of the
[SCAN] key at the top of the keyboard. They are accessed using a key combination ––
[FN/BLUE] followed by the [CTRL] or the [ALT] key.
The [TAB] Key
Typically, the [TAB] key moves the cursor to the next field to the right or downward.
The [ESC] Key
Generally, this key is used as a keyboard shortcut to close the current menu, dialog box or
activity and return to the previous one. On the QWERTY keyboard, a key combination is re-
quired to access the [ESC] key. Press [FN/BLUE] [TAB].
The Windows [START] Key
This key displays the Start menu.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 43

Chapter 3: Get To Know WORKABOUT PRO3
The Keys

The [SPACE] Key

Pressing this key inserts a blank space between characters. In a Windows dialog box, press-
ing the [SPACE] key enables or disables a checkbox. On the WORKABOUT PRO3 S
numeric keyboard, this key is accessed by key combination –– [FN/ORANGE] [0] (zero).
The [SCAN] Keys
The WORKABOUT PRO3 is equipped with a [SCAN] bar located just below the display
and two [SCAN] keys–– situated on the left and the right sides of the unit. [SCAN] keys acti-
vate the scanner beam. For units that do not have internal scanners, these keys can be
remapped to serve other functions.
Volume Keys - [UP ARROW] and [DOWN ARROW]
The volume keys are located above the [UP ARROW] and [DOWN ARROW]. The [UP
ARROW] key –– the increase volume key –– is labelled with a plus symbol . The
[DOWN ARROW] key –– the decrease volume key –– is labelled with a minus symbol .
The Function Keys
With the exception of the QWERTY keyboard which has 10 function keys, the WORK-
ABOUT PRO3 keyboard is equipped with a total of 14 function keys. On the alpha and
numeric keyboards, function keys [F1] to [F4] are located across the top of the keyboard to
the left a right of the Scan key; these function keys are directly accessible –– a key combina-
tion is not required. Ten additional function keys are colour coded in blue print on the unit
body; these keys are accessed by executing a key combination, [FN/BLUE] followed by the
appropriate key.
For example, to access function key [F7] on a numeric keyboard:
•• Press the [FN/BLUE] key followed by the [7] key –– the numeric key to which function
key [F7] is mapped.
•• To access function key [F8], press [FN/BLUE] [8], and so on.
The Macro Keys (WORKABOUT PRO3 C Only)
WORKABOUT PRO3 C hand-helds are equipped with a series of macro keys that can be
programmed to replace frequently used keystrokes, along with the function of executable
keys like the [ENTER] key, the [BKSP] key, any function key and arrow key, and so on.
Alphanumeric keyboards have ten macro keys: [M1] to [M10]. These keys are colour coded
in orange print above the numeric keys.
To access a macro key:
•• Press the [FN/ORANGE] key followed by the appropriate numeric key from [1] to [0].

44 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 3: Get To Know WORKABOUT PRO3
Alpha Keyboard –– Accessing Keys

To access macro key [M1], press [FN/ORANGE] [1].

To access macro key [M2], press [FN/ORANGE] [2], and so on.

3.4.4 Alpha Keyboard –– Accessing Keys

The alpha and numeric keys on WORKABOUT PRO3 C units are directly accessible from
the keyboard –– no key combination is required.

3.4.5 QWERTY Keyboard –– Accessing Numeric Keys

Alpha keys on a QWERTY keyboard are directly accessible. Numeric keys are printed in
orange type above some of the alpha keys and require a key combination to access them.
To access a numeric key:
•• Press the [FN/ORANGE] key followed by the appropriate alpha key in the left-hand
panel of the keyboard.
To access [1], press [FN/ORANGE] [W].
To access [2], press [FN/ORANGE] [E], and so on.

3.4.6 Numeric Keyboard –– Accessing Alpha Keys

While numeric keys are directly accessible on the numeric keyboard, all alpha characters are
printed on the unit plastic in orange typeface above the numeric keys. An indicator in the left
corner of the taskbar displays the currently selected character. To access an alpha character,
first press the [FN/ORANGE] key and then press the numeric key above which the alpha
character you want to type is printed.

3.4.6.1 Choosing a Single Alpha Character

The examples below illustrate how to access, A, B and C, all of which are printed in orange
characters above the numeric key [2].

Important: The letters you choose appear in the softkey bar, providing a visual indica-
tor of which letter will be displayed on the screen.

To choose the letter a:

•• Press the [FN/ORANGE] key, and press the numeric key [2].

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 45

Chapter 3: Get To Know WORKABOUT PRO3
Numeric Keyboard –– Accessing Alpha Keys

Note: To choose the second, third or fourth alpha character assigned to a numeric key, you
may want to lock the [FN/ORANGE] key ‘‘on’’. By default, the [FN/ORANGE] key is
locked ‘‘on’’ when pressed once. However, depending on how your unit is set up in the
‘‘One Shots’’ tab, you may find that you need to press the [FN/ORANGE] key twice to
lock it ‘‘on’’. Refer to ““One Shots”” on page 127 for details.

To choose the second letter in the sequence——in this example, the letter b:
•• Lock the [FN/ORANGE] key ‘‘on’’. A shift-state indicator icon in the softkey bar repre-
sents the orange key with a black frame around it to indicate that this key is locked ‘‘on’’.
•• Press numeric key [2] twice to display the letter b.
To choose the third letter in the sequence——in this example, the letter c:
•• Lock the [FN/ORANGE] key ‘‘on’’.
•• Press numeric key [2] three times to display the letter c.

Note: Keep in mind that there is a timeout if you pause for one second between key presses
when selecting the second, third or fourth letters on a key. For example, suppose you
want to type the letter ‘‘c’’ –– you would need to press the [2] key three times. With the
[FN/ORANGE] key locked ‘‘on’’, if you press [2] twice and then pause between key
presses for 1 second, the letter ‘‘b’’ will be selected automatically.

3.4.6.2 Creating Uppercase Letters

To display capital letters, you need to first lock the [SHIFT] key ‘‘on’’.
•• Press the [SHIFT] key twice.
All alpha keys are displayed in uppercase until you press the [SHIFT] key again to ‘‘unlock’’
(switch off) the function of this key.

3.4.6.3 Choosing Multiple Alpha Characters

•• Lock the [FN/ORANGE] key ‘‘on’’.
Each time you press a numeric key from [2] through [9], an alpha character will be dis-
played on the screen. Remember that you can refer to the softkey bar for a visual indication
of which alpha key will be displayed on the screen.

Important: Once you have finished typing alpha characters, remember to turn off or
unlock the [FN/ORANGE] key. Check the shift-state indicator icon (refer
to Figure 3.4 on page 42) to make certain that the key is turned off.

46 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 3: Get To Know WORKABOUT PRO3
The Keypad Backlight

3.4.7 The Keypad Backlight

The intensity of the keypad backlight can be configured using the Backlight icon accessed
by tapping on Start>Settings. Refer to ““Backlight”” on page 147 for details about this
option.

3.5 The Display

WORKABOUT PRO3s are equipped with display backlighting to improve character visibil-
ity in low light conditions. The backlight switches on when a key is pressed or the screen is
tapped.

3.5.1 Adjusting the Backlight

To set the backlight intensity and the duration of time that the backlight will remain on,
you’’ll need to choose the Backlight icon.
•• Tap on Start>Settings and then, tap on System tab>Backlight icon.
Refer to ““Backlight”” on page 147 for details.

3.5.2 Aligning (Calibrating) the Touchscreen

If your touchscreen has never been aligned (calibrated) or if you find that the stylus pointer
is not accurate when you tap on an item, follow the steps below.
•• Tap on Start>Settings. Tap on the System tab to display the Screen icon.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 47

Chapter 3: Get To Know WORKABOUT PRO3
Screen Orientation

•• Tap on the Screen icon to display the Alignment tab.

•• Tap on the Align Screen button, and follow the directions on the screen to align (cali-
brate) the screen.

Note: This window provides two additional tabs: ClearType and Text Size. Tapping on the
ClearType tab allows you to enable the ClearType option to smooth screen font
appearance. The Text Size tab allows you to increase or decrease the size of the font
displayed on the screen.

3.5.3 Screen Orientation

In addition to screen calibration, the Screen icon allows you to determine how your screen
will be oriented –– portrait or landscape (right- or left-handed).
•• Tap on Start>Settings>System tab.

48 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 3: Get To Know WORKABOUT PRO3
Indicators

•• Tap on the Screen icon.

•• In the General tab, tap on the orientation that best suits the way in which you use your
WORKABOUT PRO3.

3.6 Indicators
The WORKABOUT PRO3 uses an LED (Light Emitting Diode), onscreen messages and
audio tones to indicate the various conditions of the hand-held, the batteries, the scans and
so on.

3.6.1 The LED

A single, two-coloured LED is located on the upper-right side of the keyboard, just above
the [ENTER] key. When you press [ENTER], the LED flashes green to indicate that the unit
has been powered up. The LED table following outlines the behaviour of the LED while the
unit is docked in a charger.
Keep in mind that the application running on the WORKABOUT PRO3 can dictate how the
LED operates. Review the documentation provided with your application to determine LED
behaviour.
If the unit is attached to an external power supply, the hand-held LED reflects the battery
charge status.
Figure 3.6 WORKABOUT PRO3 LED Behaviour

LED Behaviour Charge Status

Solid Green Charge complete.
Flashing Green Charge in progress. Battery charged to less than 80% capacity.
Slow Flashing Green Battery charged to greater than 80% of capacity.
Solid Red Battery fault; battery is not charging.
*Fast Flashing Green Battery temperature condition. Battery temperature is greater than
45°C; the battery will not charge.
*Older WORKABOUT PRO3s using Keyboard micro and Power micro firmware earlier than
version 2.3.603 indicate the battery temperature condition using a Flashing Red LED.

3.7 Audio Indicators

The audio speaker provides a variety of sounds when a key is pressed, a keyboard character
is rejected, scan input is accepted or rejected, an operator’’s entry does not match in a match

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 49

Chapter 3: Get To Know WORKABOUT PRO3
Adjusting Speaker Volume

field or the battery is low. To specify how you want your WORKABOUT PRO3 to respond
under various conditions, refer to ““Sound & Notifications”” on page 143.
The volume can be adjusted using the [UP ARROW] and [DOWN ARROW]. The increase
volume key is labelled with a plus symbol and the decrease volume key is la-
belled with a minus symbol.

3.7.1 Adjusting Speaker Volume

•• Lock the [FN/BLUE] key ‘‘on’’ and then, press [UP ARROW] –– the increase volume key
or [DOWN ARROW] –– the decrease volume key until the volume meets your
requirements.
•• When you’’re done, you will need to unlock (turn ‘‘off’’) the [FN/BLUE] key. Press
[FN/BLUE] again to unlock the key.

3.8 Monitoring the Battery and Maximizing Run Time

Note: When the main battery is at 50% capacity, a ‘‘low battery’’ warning is displayed.
When the battery is at approximately 10% capacity, a ‘‘very low main battery’’ notifi-
cation bubble appears.

As Lithium Ion batteries age, their capacity decreases gradually, and they are generally con-
sidered depleted after approximately 2 years of use (less than 60% of original capacity
remaining). Keep in mind however that heavy usage or operating the unit at temperature ex-
tremes will shorten the battery life.
Lithium Ion batteries do not require conditioning cycles and the WORKABOUT PRO3
battery system (including chargers) requires no user interaction to maintain peak
performance.
To maximize the run time of your batteries, consider the following:
•• The display backlight is the largest drain on the battery. Try to keep its brightness as low
as possible.
•• The hand-held is ‘‘event’’ driven——that is, when the unit is not in use, it reverts to sleep
mode (even when it appears to be running), saving battery power. Events include a key
press, touchscreen taps and scan triggers. Power consumption is reduced if you avoid
unnecessary events, and allow the unit to sleep as much as possible.
•• The battery is a ‘‘smart battery’’ with built-in intelligence.
Tapping on the Power icon under Start>Settings>System tab displays a dialog box that pro-
vides detailed information about the battery status of the main and backup batteries installed
in your unit.

50 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 3: Get To Know WORKABOUT PRO3
Storing Batteries

•• When the hand-held is switched off, it goes into a low-power, suspend state but contin-
ues to draw a small amount of power from the battery. This should not be an issue unless
the unit is left in suspend state for more than a week——for long-term storage, the battery
should be removed from the unit.
Keep in mind also that some components and settings can affect the battery life while in
suspend state. For example, if the GSM module power mode is set to Always On, the battery
life in suspend state is reduced.

3.8.1 Storing Batteries

Long term battery storage is not recommended. If storage is necessary:
•• Always try to use a ‘‘first-in first-out’’ approach to minimize storage time.
•• Lithium Ion batteries age much faster at elevated temperatures. Store batteries at tem-
peratures between 0° C and 20° C.
•• Always charge batteries to at least 40 to 60% before storing them. Batteries can be
damaged by an over-discharge phenomenon that occurs when an empty battery is stored
for a long period of time such that the cell voltage drops below a lower limit.
•• To minimize storage degradation, recharge stored batteries to 40 to 60% every 4 or 6
months to prevent over-discharge damage.
•• A ‘‘never used’’ Li-Ion battery that has been stored for 3 years may have limited or no
useful life remaining once put into service. Think of batteries as perishable goods.

3.9 Uploading Data in a Docking Station

Important: Review the documentation provided with the user application installed in
your WORKABOUT PRO3 before performing data uploads.

The desktop docking station and quad docking station are typically used to upload transac-
tion data to a server computer when a radio link is not available.

Note: Refer to ““Chargers And Docking Stations”” on page 261 for more details.

The desktop docking station can complete batch uploads to a Client USB connected PC or
server. An optional 10/100baseT Ethernet module is also available.
Unlike the desktop docking station, the quad docking station supports only TCP/IP connec-
tions to a PC or server through a 10/100baseT Ethernet connection.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 51

Chapter 3: Get To Know WORKABOUT PRO3
Bluetooth Radio

When a WORKABOUT PRO3 is properly inserted in a docking station, a dock icon is dis-
played in the navigation bar at the top of the screen. The unit also detects the presence of the
Ethernet network.

3.10 Bluetooth Radio

Note: Integrated Bluetooth radios are standard on WORKABOUT PRO3 C and S units.
Keep in mind also that Bluetooth is available simultaneously with WAN and 802.11g
on a single unit.

The WORKABOUT PRO3 is equipped with an on-board Bluetooth radio. This type of radio
enables short range data communication between devices. The Bluetooth also provides the
capability to use a Bluetooth-enabled cellular phone as a data modem, exchanging informa-
tion with other Bluetooth devices and providing network access. Refer to ““The Bluetooth
GPRS Phone”” on page 210 for setup details.

3.10.1 Pairing a Bluetooth Device

Note: Headset pairing information is also available in the Getting Started Centre in the
Today screen on your WORKABOUT PRO3.

Turning the Bluetooth Radio On

Before pairing a headset or any other Bluetooth device with your WORKABOUT PRO3,
make certain that the Bluetooth device power is enabled; it is enabled by default. If, for
some reason, it has been disabled:
•• Tap on Start>Settings>System tab and then, tap on the Power icon to display the
Power dialog box.
•• Tap on the Built-in Devices tab, and tap in the checkbox next to Enable Bluetooth.
•• Next, tap on Start>Settings>Connections tab>Bluetooth icon.
•• Tap on the Mode tab, and check Turn on Bluetooth. Tap OK.
•• Turn your Bluetooth device on and place it within a few feet of your
WORKABOUT PRO3.
•• If needed, set your Bluetooth device to visible (discoverable) so that the hand-held can
detect it and establish a connection.
Pairing a Device
To pair devices:
•• Follow the manufacturer’’s instructions to place the remote device in pairing mode.

52 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 3: Get To Know WORKABOUT PRO3
Pairing a Bluetooth Device

•• Choose the Devices tab, and tap on the Scan button to scan for devices in the area.
•• When the scan is complete, tap and hold the stylus on the device to which you want
to pair.
•• In the pop-up Device menu, tap on Pair.
An Authentication dialog box is displayed.

•• If the remote device has authentication enabled, type the PIN in this dialog box.
•• To proceed without authentication, tap on Next.

Note: If a remote device has authentication enabled and you’’ve skipped the authentication
process, a pop-up screen will ask if you want to allow the remote device to connect to
the WORKABOUT PRO3. Tap on Yes and type the PIN. When authentication is com-
plete, tap on Done.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 53

Chapter 3: Get To Know WORKABOUT PRO3
Pairing a Bluetooth Device

After entering the device PIN, the Services dialog appears with a list of services available for
that device.

•• Click in the checkbox to the left of the service to activate it.

•• Click on Done.

Note: If you choose a service requiring additional information, a dialog box is automati-
cally displayed where further details can be completed.

The sample dialog box below is an example of a service requiring additional information ––
in this case, the Serial Port Service.

This dialog box offers a number of additional options such as enabling Encryption and se-
lecting three different modes: Serial, ActiveSync and Scanner

54 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 3: Get To Know WORKABOUT PRO3
Inserting the SD/MMC Card and SIM Card

•• Serial is used for simple serial port communication.

•• ActiveSync is for ActiveSync-over-Bluetooth.
•• Scanner is used to create a seamless connection between the incoming Bluetooth bar
code and the WORKABOUT PRO3.
Once you’’ve completed the information:
•• Tap on Next and then in the Services screen, click on Done.
The device you paired is listed in the Pair tab.

3.11 Inserting the SD/MMC Card and SIM Card

There are two card slots available in the battery compartment of the hand-held –– the lower
slot is provided for a SD/MMC (Secure Digital/Multi-Media Card) and the upper slot is for
a SIM (Subscriber Identity Module) card.
SD/MMC cards provide additional non-volatile memory to your hand-held. SIM cards
provide access to the hand-held’’s voice option, the Internet, and so on.

3.11.1 Inserting and Removing the Card

•• Switch off the WORKABOUT PRO3.
•• Remove the battery cover and the battery.
A hinged door at the top of the battery compartment protects the connectors. This door
differs slightly depending on the type of unit you are using. On the WORKABOUT PRO3
C, a plastic SD/MMC door is hinged on the left-hand side of the unit. If you are working
with a WORKABOUT PRO3 S, a metal door is hinged on the right-hand side of the unit.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 55

Chapter 3: Get To Know WORKABOUT PRO3
Inserting and Removing the Card

•• On a WORKABOUT PRO3 C, pull the hinged door down as the arrow icon on the door
indicates.
•• On a WORKABOUT PRO3 S, pull the metal door upward to expose the SD/MMC
slots.
•• Orient the SD/MMC or SIM card according to the legend stamped into the battery
well plastic.
•• For a SD/MMC card, slide the card into the lower slot, pushing it inward until it latches
into place.
•• For a SIM card, slide the card into the upper slot, pushing it inward until it latches
into place. Note that a label over the SIM opening needs to be removed before the card
can be inserted (only after a GSM/UMTS radio is installed).
•• On a WORKABOUT PRO3 C, swing the hinged door back up into place, and gently
snap it shut.
On a WORKABOUT PRO3 S, the metal SD door incorporates dimples that act as a
locking feature.
Dimples

•• Push the door down so the dimples fit into the slot cut into the battery
compartment plastic.
To remove the card:
•• Gently press the card inward until it unlatches, and the card is ejected from the slot.

56 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 3: Get To Know WORKABOUT PRO3
General Maintenance

3.12 General Maintenance

3.12.1 Caring for the Touchscreen
The top of the touchscreen is a thin, flexible polyester plastic sheet with a conductive
coating on the inside. The polyester can be permanently damaged by harsh chemicals and is
susceptible to abrasions and scratches. Using sharp objects on the touchscreen can scratch or
cut the plastic, or crack the internal conductive coating.
The chemicals listed below must not come into contact with the touchscreen:
•• sodium hydroxide,
•• concentrated caustic solutions,
•• benzyl alcohol, and
•• concentrated acids.
If the touchscreen is used in harsh environments, consider applying a disposable screen pro-
tector (WA6111-G2). These covers reduce the clarity of the display slightly but will
dramatically extend the useful life of the touchscreen. When they become scratched and
abraded, they are easily removed and replaced.

3.12.2 Cleaning the WORKABOUT PRO3

Important: Do not immerse the unit in water. Dampen a soft cloth with mild detergent to
wipe the unit clean.

•• Use only mild detergent or soapy water to clean the hand-held unit.
•• Avoid abrasive cleaners, solvents or strong chemicals for cleaning. The plastic case is
susceptible to harsh chemicals. The plastic is partially soluble in oils, mineral spirits and
gasoline. The plastic slowly decomposes in strong alkaline solutions.
•• To clean ink marks from the keypad or touchscreen, use isopropyl alcohol.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 57

WORKING WITH WINDOWS MOBILE 6.1 4
4.1 Navigating in Windows Mobile 6.1 and Applications . . . . . . . . . . . . . . . . . 61
4.1.1 Navigating Using a Touchscreen and Stylus . . . . . . . . . . . . . . . . . 61
4.2 Windows Mobile 6.1 Desktop––Today Screen . . . . . . . . . . . . . . . . . . . . . 61
4.2.1 Windows Mobile 6.1 Navigation Bar . . . . . . . . . . . . . . . . . . . . 62
4.2.2 Today’’s Date, Clock and Alarm . . . . . . . . . . . . . . . . . . . . . . . 65
4.2.3 Ownership Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
4.2.4 E-mail Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
4.2.5 Task Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
4.2.6 Calendar of Upcoming Appointments . . . . . . . . . . . . . . . . . . . . 70
4.2.6.1 Creating and Editing Appointments. . . . . . . . . . . . . . . . . 70
4.2.6.2 Adding Reminders . . . . . . . . . . . . . . . . . . . . . . . . . 71
4.2.6.3 Using Categories . . . . . . . . . . . . . . . . . . . . . . . . . . 72
4.2.6.4 Deleting Appointments . . . . . . . . . . . . . . . . . . . . . . . 73
4.3 Start Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
4.3.1 Customising the Start Menu . . . . . . . . . . . . . . . . . . . . . . . . . 74
4.4 Managing Files and Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
4.4.1 Creating a New Folder . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
4.4.2 Renaming a File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
4.4.3 Copying a File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
4.4.4 Deleting a File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
4.5 Using Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
4.5.1 Pop-Up Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
4.6 The Softkey Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
4.7 Programs––Using Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
4.8 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
4.9 Help. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
4.10 Entering Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
4.10.1 Soft Keyboard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
4.10.2 The Transcriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 59

 4.10.3 Block Recognizer and Letter Recognizer . . . . . . . . . . . . . . . . . . 85

60 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 4: Working With Windows Mobile 6.1
Navigating in Windows Mobile 6.1 and Applications

4.1 Navigating in Windows Mobile 6.1 and Applications

Graphic user interfaces like Windows Mobile 6.1 for portable devices or desktop Windows
(2000, XP, etc.) utilize ‘‘point and click’’ navigation. On the WORKABOUT PRO3, this is
accomplished using a touchscreen and stylus rather than a mouse.

4.1.1 Navigating Using a Touchscreen and Stylus

Note: If the touchscreen is not registering your screen taps accurately, it may need recali-
bration. Refer to ““Aligning (Calibrating) the Touchscreen”” on page 47.

A touchscreen is a standard feature on all WORKABOUT PRO3s. Each is equipped with a

stylus––a pointing tool ––stored in a slot at the top of the unit.
•• Use the stylus to tap on the appropriate icon to open files and folders, launch applica-
tions and programs, make selections, and so on.

4.2 Windows Mobile 6.1 Desktop––Today Screen

Keep in mind that if your hand-held is running Windows Mobile 6.1 Professional, the Today
screen will offer Phone connectivity in the Navigation Bar at the top of the screen and a
Phone softkey in the Softkey Bar at the bottom of the screen. Units running Windows Mobile
6.1 Classic provide a Calendar option in the Softkey Bar; phone options are not available
with this version of Windows Mobile 6.1.
Volume Control
Connectivity Indicator
Battery Charge State
Start Button Navigation Bar
Today’s Date Clock Phone Settings
Owner Information
E-mail Notification
Tasks To Complete
Calendar-Upcoming
Appointments

Softkey Bar
Windows Mobile 6.1 Classic

Phone Softkey
Windows Mobile 6.1 Professional

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 61

Chapter 4: Working With Windows Mobile 6.1
Windows Mobile 6.1 Navigation Bar

The Today screen displays all your important information––tasks, unread e-mails and
upcoming appointments––all in one place. The Start menu provides access to everything else
you’’ll need.

4.2.1 Windows Mobile 6.1 Navigation Bar

The navigation bar along the top of the screen provides icons that, when tapped, open their
associated programs. If you’’re unit is equipped with Windows Mobile 6.1 Professional,
you’’ll be see a Phone hotkey for quick access to phone settings.
Hotkeys
Volume Control
Start Button
Connectivity Battery Capacity

Windows Mobile 6.1 Classic Navigation Bar

Phone Settings

Windows Mobile 6.1 Professional Navigation Bar

Note: When a peripheral is attached to the tether or LIF port of the WORKABOUT PRO3,
an associated icon is displayed briefly in the navigation bar to indicate that the hand-
held has recognized the connection.

Start Button
Tapping on the Start button displays the Start menu.

62 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 4: Working With Windows Mobile 6.1
Windows Mobile 6.1 Navigation Bar

Connectivity
The Connectivity hotkey provides a shortcut to the Connections tab in the Settings window.
This tab provides access to Bluetooth, network, network card and internet connection
setups.

Phone Settings
If you’’re hand-held is running Windows Mobile 6.1 Professional, it is equipped with a phone
option. A hand-held in which a SIM card and GSM radio are installed can access phone set-
tings along with the Wireless Manager from this pop-up bubble. Any active connections are
also listed here.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 63

Chapter 4: Working With Windows Mobile 6.1
Windows Mobile 6.1 Navigation Bar

Volume Control
Tapping on this icon displays a sliding tab that allows you to adjust the speaker volume or
turn the speaker on and off.
On units running Windows Mobile 6.1 Professional, two volume adjustments are provided ––
one for the speaker volume and the other for the phone dialer volume.

Phone
Dialer Volume

Windows Mobile 6.1 Classic Windows Mobile 6.1 Professional

Battery Capacity
Tapping on the Battery hotkey displays the Battery tab allowing you to view the remaining
battery capacity in the main battery and the backup battery.

64 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 4: Working With Windows Mobile 6.1
Today’’s Date, Clock and Alarm

4.2.2 Today’’s Date, Clock and Alarm

This option displays the current date. If you need to adjust the date or set an alarm:
•• In the Today screen, tap on today’’s date.
The Clock & Alarms screen is displayed.

Time Tab
•• Tap on the Time Zone drop-down menu to set the GMT.
•• Next, tap in the Date and Time drop-down menus to set the current date and time.

Note: A checkmark next to Sync to current time zone automatically adjusts to the time
zone, and a checkmark next to Notify me when time is updated displays a notifica-
tion message if the time is adjusted.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 65

Chapter 4: Working With Windows Mobile 6.1
Today’’s Date, Clock and Alarm

Alarms Tab
To set an alarm:
•• Tap on the Alarms tab.

You can set a maximum of three alarms.

•• Tap in the checkbox to enable an alarm.
•• Tap the day on which you want the alarm to go off –– Sunday through Saturday.
•• Tap on the time to display the clock.

Time Field

66 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 4: Working With Windows Mobile 6.1
Ownership Information

•• To set the time, in the time field below the clock, tap on the hour to highlight it, and
type the hour at which you want the alarm to ring. To set the minutes, highlight the min-
utes, and type the appropriate minutes, or
You can also assign the alarm activation time using the clock graphic. Position the stylus
on the hour hand of the clock, and drag it to the correct hour. Do the same for the
minute hand.
•• Tap on OK to save your changes.

Note: Tapping on the More tab displays a dialog box in which you can choose to Display
the clock on the title bar in all programs and/or to Sound alarms even when the
device is set to silent or vibrate.

4.2.3 Ownership Information

This option allows you to add your personal information to the WORKABOUT PRO3.
Some of this information will be displayed in the desktop Today screen.
•• Tap on Owner to display a screen in which you can type information.

•• Type your name, company name, address, telephone number and e-mail address.

Note: You can type information using the WORKABOUT PRO3 keyboard, or you can tap
on the soft keyboard icon in the bottom right corner of the softkey bar to display an
onscreen keyboard.

The Ownership screen has two additional tabs––Notes where you can add any pertinent, addi-
tional information and Options where you can specify whether you want the desktop to
display your ‘‘identification’’ information or your ‘‘note’’ information.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 67

Chapter 4: Working With Windows Mobile 6.1
E-mail Notification

4.2.4 E-mail Notification

If you have any e-mail, it will be indicated in the Today desktop screen. To view your e-mail,
tap on the E-mail Notification option.
Refer to ““Messaging”” on page 111 for details about setting up your Inbox.

4.2.5 Task Notification

Tasks lets you create lists of entries representing your responsibilities, upcoming projects,
and so on. If you’’ve assigned any tasks, this option lets you know how many active tasks
you have.

Note: You can synchronize the Task Notification option using ActiveSync so that any tasks
are displayed on your WORKABOUT PRO3 as well as your PC. Refer to ““Synchroni-
zation”” on page 90 for details.

•• Tap on the Tasks option to display a list of tasks.

Creating a Task
•• Tap in the field labelled Tap here to add a new task. The text is replaced with a blink-
ing cursor. If you prefer to type the task using the soft keyboard, tap on the soft keyboard
icon in the softkey bar.
•• Type your task description.
•• Tap anywhere in the blank part of the screen, or press [ENTER] to add the task to
your list.

68 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 4: Working With Windows Mobile 6.1
Task Notification

Editing a Task
•• Tap on a task in the task list to highlight it. Tap Edit in the softkey bar to display a
detailed task screen where you can define task characteristics.
Figure 4.1 Task Details Screen

Each of the nine items in this screen, when tapped, displays a drop-down menu where you
can choose from a list of options.
•• Once you’’ve completed all the appropriate fields, tap on OK to save your changes.

Note: You can also tap on the Notes tab to add additional information about the task your
are defining.

Deleting a Task
•• Press and hold the stylus on a task until a pop-up menu is displayed.
•• Tap on Delete Task.
Marking a Task as Completed
•• In the Tasks list, tap the checkbox next to the items that are completed.
Sorting Tasks
•• Tap on the Menu option in the lower-right corner of softkey bar, and tap on Sort By.
You can choose from Status, Priority, Subject, Start Date or Due Date. The tasks are ar-
ranged in the list according to the criterion you chose.
Limiting the Tasks Displayed in the Task Screen
•• Tap on Menu in the lower-right corner of softkey bar, and tap on Filter.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 69

Chapter 4: Working With Windows Mobile 6.1
Calendar of Upcoming Appointments

You can choose All Tasks, Recently Viewed, No Categories, Active Tasks or Completed
Tasks. The tasks are displayed on the screen according to the preference you chose.

4.2.6 Calendar of Upcoming Appointments

This option is used to map out all your upcoming appointments, meetings and so on in the
weeks, months and years ahead.

Note: You can synchronize the Calendar using ActiveSync so that any meetings, appoint-
ments and so on are displayed on your WORKABOUT PRO3 Today screen as well as
on your PC. Refer to ““Synchronization”” on page 90 for details.

•• Tap on the Upcoming Appointments option in the Today screen, or tap on Start>Cal-
endar to display the calendar.
If your unit is running Windows Mobile 6.1 Classic, you can tap on Calendar in the Softkey
Bar.

The default calendar displays an Agenda of appointments for the week, divided into days.
You can choose to leave the calendar as is, or you can tap on the Day softkey to reflect the
Week, Month or Year.

4.2.6.1 Creating and Editing Appointments

•• In the Calendar screen, tap on Menu in the softkey bar, and then tap on
New Appointment.

70 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 4: Working With Windows Mobile 6.1
Calendar of Upcoming Appointments

Figure 4.2 Appointment Detail Screen

•• In the Subject field, name the appointment.

•• Complete the remaining fields to reflect your appointment details.

Note: Refer to ““Adding Reminders”” on page 71 for details. Refer to ““Using Categories”” on
page 72 for information about this option.

•• Tap on OK to save your changes and close the screen.

4.2.6.2 Adding Reminders

•• In the Today screen, tap on the appointment for which you’’d like a reminder. In the
next screen, tap on the appointment title. Finally, in the summary screen, tap on the
Menu softkey and then, choose the Edit command.

If you want to be reminded in advance of an appointment:

•• In the Reminder field, choose Remind me from the drop-down menu.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 71

Chapter 4: Working With Windows Mobile 6.1
Calendar of Upcoming Appointments

•• In the second Reminder field, tap on the number in the field to display a drop-down
menu where you can define a numeric value of 1, 5, 10, 15, 30. Tap on minute(s) to
display a drop-down menu from which you can choose the time unit for your reminder––
minute(s), hour(s), day(s) or week(s).
•• Tap OK to finish. You are returned to the view you were in before adding the reminder.
•• Tap on the appointment in the Calendar screen to display it in a summary screen. The
reminder is indicated by the small, bell icon.

4.2.6.3 Using Categories

Categories help you organize and track the different types of data you keep on your hand-
held.
To assign an appointment to a category:
•• Tap on an appointment in the Today screen. In the Calendar screen, tap on the
appointment again.

72 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 4: Working With Windows Mobile 6.1
Calendar of Upcoming Appointments

•• Tap the Categories field to display the Categories screen.

•• Tap in the checkbox next to the category to which you want to assign the appointment.
•• Tap OK. Your appointment is assigned to the category or categories you chose.

Note: You can create a new category by tapping on New in the softkey bar at the bottom of
the screen.

4.2.6.4 Deleting Appointments

•• Tap and hold the stylus on the appointment you want to delete.
•• Tap on Delete Appointment in the pop-up menu.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 73

Chapter 4: Working With Windows Mobile 6.1
Start Menu

4.3 Start Menu

To display the Start menu:
•• Tap on the Start button in the upper-left corner of the Navigation Bar.
Start Button Navigation Bar

Custom-chosen
programs

Most recently used

programs
Windows Mobile
command centre

•• Tap on the Start menu item with which you want to work.

Note: Keep in mind that if your hand-held is running Windows Mobile 6.1 Classic, the
Phone option displayed in the sample screen above is not available; this option is
only offered on units running Windows Mobile 6.1 Professional.

4.3.1 Customising the Start Menu

You can choose the items you want to appear in the Start menu––items you use most often.
•• Tap on Start>Settings.

74 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 4: Working With Windows Mobile 6.1
Managing Files and Folders

•• In the Personal tab, tap on the Menus icon.

•• Tap the checkboxes next to the items you would like to appear in your Start menu.
When you’’ve finished your selections, tap on OK.

4.4 Managing Files and Folders

Windows Mobile 6.1 files are stored in folders and sub-folders that are accessible with File
Explorer. You can open, save, rename, copy and paste files in the same manner as you
would on any desktop PC.
•• Tap on Start>Programs>File Explorer.
Tap to display additional
Tap to display sorting options storage/files

Files stored
here automa-
tically

Tap to move
back one level

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 75

Chapter 4: Working With Windows Mobile 6.1
Creating a New Folder

4.4.1 Creating a New Folder

•• Tap Start>Programs>File Explorer.
•• Tap Menu>New Folder in the softkey bar at the bottom of the screen.
•• Use the WORKABOUT PRO3 keyboard or the soft keyboard to assign a name to the
folder.

4.4.2 Renaming a File

•• Press and hold the stylus on the file you want to rename. A ring of dots is displayed fol-
lowed by a pop-up menu.
•• Tap Rename. The file name is highlighted. Type a new name.

4.4.3 Copying a File

•• Press and hold the stylus on the file you want to copy. A ring of dots is displayed fol-
lowed by a pop-up menu.
•• Tap on Copy in the pop-up menu.
•• Navigate to the location where you want to copy the file.
•• Press and hold the stylus in a blank area of the screen——away from other icons——until a
pop-up menu is displayed.
•• Tap Paste to copy the file to the new location.

4.4.4 Deleting a File

•• Press and hold the stylus on the file or folder you want to delete until a pop-up menu is
displayed.
•• Tap Delete to remove the file.

76 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 4: Working With Windows Mobile 6.1
Using Menus

4.5 Using Menus

In Windows Mobile 6.1 Classic and Professional, the menu is located in the softkey bar at
the bottom of the screen.

Softkey Bar Menu

To execute a command:
•• Tap on Menu to display the commands associated with it, and then tap on the command
you want to execute.

4.5.1 Pop-Up Menus

Pop-up menus are available in many screens and programs. They offer quick access to a
group of useful commands in addition to those available in the menu bar.
•• To display this menu, gently press and hold the stylus on the screen. A ring of dots is
displayed on the screen followed by a pop-up menu.

•• Tap on the command you want to execute.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 77

Chapter 4: Working With Windows Mobile 6.1
The Softkey Bar

4.6 The Softkey Bar

The WORKABOUT PRO3 is equipped with a softkey bar at the bottom of the screen. It dis-
plays softkeys that allow you to access menus and commands. It also displays the soft
keyboard icon.

Soft keyboard icon Soft keyboard

Softkey Bar
Softkeys
Softkey
Tapping on a softkey displays information associated with the softkey––for example, in the
sample screen above, the Menu softkey displays the commands associated with Word
Mobile. The View softkey lets you to tailor how the Word document will be displayed.
The Soft Keyboard
Tapping on the soft keyboard icon displays an onscreen keyboard you can use as an alterna-
tive to the hand-held keyboard.
Shift-State Indicator Icon
The softkey bar can also display the shift-state indicator icon. This icon indicates active
modifier keys––[SHIFT], [ALT], [CTRL], [FN/ORANGE] and [FN/BLUE].

78 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 4: Working With Windows Mobile 6.1
The Softkey Bar

•• Tap on Start>Settings>Buttons>One Shots. Tap in the checkbox next to Show modi-

fier key state, to replace the soft keyboard icon with the shift-state indicator icon.

Shift-state indicator icon

When a modifier key is pressed, it is displayed in the shift-state indicator icon. In the
example above, the [FN/ORANGE] key was activated.
To distinguish a ‘‘locked’’ modifier key––a key that has been locked ‘‘on’’ –– from a modifier
key that is only active until the next key is pressed, ‘‘locked’’ keys are encircled in a black
frame in the shift-state indicator icon. Refer to ““Activating Modifier Keys & the Shift-State
Indicator”” on page 41 for details.

Note: You can still access the soft keyboard while the shift-state indicator icon is displayed.
Tapping on this icon displays the soft keyboard. Tapping on the shift-state indicator
icon again removes the soft keyboard.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 79

Chapter 4: Working With Windows Mobile 6.1
Programs––Using Applications

4.7 Programs––Using Applications

•• Tap Start>Programs to display the programs installed on your WORKABOUT PRO3.
Figure 4.3 Program Screen Icons

Opening an Application
•• Tap on an icon in this screen to launch the associated program.
Minimizing an Application
•• Tap on the X button in the upper-right corner of an application screen to minimize the
application. Note that sometimes, an [OK] button is displayed.

Note: Although it looks like the application is closed, it is only minimized. To close the
application, you’’ll need to tap on Start>Settings>System tab>Task Manager icon.
Follow the steps in ‘‘Switching Between And Closing Applications’’ below.

Switching Between and Closing Applications

The Task Manager lists all running tasks (applications).

80 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 4: Working With Windows Mobile 6.1
Programs––Using Applications

•• Tap on Start>Settings. Tap on the System tab and then the Task Manager icon –– the
Task Manager screen is opened.

This applet provides a number of options to manage your opened applications.

•• End Task: To shut down an application, highlight the program in the list and tap on
the End Task softkey in the taskbar at the bottom of the screen.
•• End All Tasks: To shut down all applications, tap on the Menu softkey and choose
End All Tasks.
•• Switch To: To make an application listed in this screen active, highlight the application
and tap on Menu>Switch To.
For additional information about this applet, refer to ““Task Manager”” on page 171.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 81

Chapter 4: Working With Windows Mobile 6.1
Settings

4.8 Settings
•• Tap Start>Settings to display the setting options for your hand-held.
Figure 4.4 Settings Icons

Settings are divided into three tabs––Personal, System and Connections. Refer to Chapter 6:
““Settings”” for details about the options available to you.

4.9 Help
Tapping on the Start>Help displays a screen of help topics that are content-specific; if for
example, the Today screen is displayed and you tap on Start>Help, the help screen will
provide topics about the Today screen. You can perform a help content search by tapping on
the Contents or Search softkeys. Keep in mind that help is not always available.

82 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 4: Working With Windows Mobile 6.1
Entering Text

4.10 Entering Text

Note: For additional information about tailoring text entry using the soft keyboard, the
transcriber, the block recognizer and the letter recognizer, refer to ““Input”” on
page 135.

You can enter text using either the soft keyboard or the WORKABOUT PRO3 keyboard.
You can also use the Transcriber to handwrite information directly on the touchscreen using
your stylus.
•• Open an existing document or create a new one–– tap Start>Office Mobile>Word
Mobile and tap on New in the softkey bar to create a new document.
If you’’re using the WORKABOUT PRO3 keyboard to enter text, there are no special steps.
Just begin typing––the text, spaces, etc. will appear in the document.

4.10.1 Soft Keyboard

The soft keyboard is laid out just like the keypad on a PC keyboard. By tapping the stylus on
letters and modifier keys like the [SHIFT] key, you can enter text in a document.

If the soft keyboard is not already displayed:

•• Tap on the soft keyboard icon in the softkey bar.
•• Tap on the letters in the keyboard to enter text in your document.
To switch to a numeric keyboard:
•• Tap on the 123 key in the upper-left corner of the soft keyboard.
•• Tap on this key again to return to the standard keyboard.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 83

Chapter 4: Working With Windows Mobile 6.1
The Transcriber

4.10.2 The Transcriber

To access the Transcriber, with your document opened:
•• Tap on the arrow next to the keyboard icon, and choose Transcriber from the pop-up
menu.
•• Review the introductory screen. It provides some shortcut symbols you can draw on
your screen to work with the Transcriber.
•• When you’’ve finished reading the introductory screen, tap OK.
The Transcriber menu and icon bars are displayed at the bottom of the document.
Figure 4.5 Transcriber Screen

Transcriber icon

•• Use your stylus to write a few words anywhere on the screen.

After a few seconds, your words are recognized (or not) and are transcribed into typed text.

Note: Character recognition is more successful if you write using large letters.

Editing Text within the Transcriber

With your document open, make certain that you are in transcriber mode––the Transcriber
icon should be displayed in the lower-right corner of the softkey bar.
•• Double-tap to select a word or triple-tap to select a paragraph, or
Draw a line through the text you want to select and wait a few seconds until the Transcriber
highlights the text.
•• Once the text is highlighted, write the new text that is to replace the highlighted
information, or

84 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 4: Working With Windows Mobile 6.1
Block Recognizer and Letter Recognizer

Press and hold the stylus on the selected text to display a pop-up menu. Choose Cut, Copy,
Paste or Clear (delete).

Note: You can also use the softkey bar tools or the shortcuts listed in the introductory screen
to help you edit a document within the Transcriber.

4.10.3 Block Recognizer and Letter Recognizer

While the Transcriber attempts to recognize natural handwriting and transcribe it, Block
Recognizer and Letter Recognizer attempt to teach you how to conform your handwriting to
what the hand-held can recognize.
Block Recognizer
•• Open a document, and tap on the arrow next to the input icon. Choose Block
Recognizer.

Input Panel Recognizer Icon Bar

Input Icon

There are two points to remember when using Block Recognizer. First, limit your writing to
the Block Recognizer input panel––do not write in the body of the document. Second, write
only uppercase letters with your stylus.
•• Tap on the ? icon in the Recognizer Icon Bar to display the Character Recognizer
screen. This screen provides a visual demonstration of how to enter letters that will be
recognized. Tap on a character in the soft keyboard for a demonstration of how to form
a recognizable letter.
•• In the Block Recognizer panel, write letters to the left (abc) and numbers to the right
(123) on the input panel. Remember to write using uppercase letters––they will be
printed on the screen as lowercase unless you follow the step below to create an upper-
case letter.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 85

Chapter 4: Working With Windows Mobile 6.1
Block Recognizer and Letter Recognizer

•• To create an uppercase character, draw a line straight up the ‘‘abc’’ panel.

•• Use the Recognizer Icon Bar to move around the screen, add spaces, special characters,
and so on.
Letter Recognizer
•• Open a document, and tap on the arrow next to the input icon. Choose Letter
Recognizer.

Input Panel Recognizer Icon Bar

Input Icon

There are two points to remember when using Letter Recognizer. First, limit your writing to
the Letter Recognizer Input Panel––do not write in the body of the document. Second, write
only lowercase letters with your stylus.
•• Tap on the ? icon in the Recognizer Icon Bar to display the Character Recognizer
screen. This screen provides a visual demonstration of how to enter letters that will be
recognized. Tap on a character in the soft keyboard for a demonstration of how to form
a recognizable letter.
•• To create an uppercase character, write a lowercase letter on the left side (ABC) of the
input panel.
•• To create a lowercase character, write a lowercase letter in the middle (abc) of the input
panel.
•• Write numbers on the right side (123) of the input panel.

86 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

PROGRAMS 5
5.1 Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
5.2 Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
5.3 ActiveSync® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
5.3.1 Synchronization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
5.4 Calculator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
5.5 Office Mobile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
5.5.1 Excel Mobile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
5.5.1.1 Workbook Components . . . . . . . . . . . . . . . . . . . . . . . 91
5.5.2 OneNote Mobile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
5.5.3 Word Mobile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
5.5.3.1 Data Entry Modes . . . . . . . . . . . . . . . . . . . . . . . . . . 99
5.5.3.2 Sharing Documents with Your PC . . . . . . . . . . . . . . . . . 99
5.5.4 PowerPoint Mobile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
5.6 Demo Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
5.7 File Explorer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
5.8 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
5.9 PTSI Imager Demo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
5.10 Internet Sharing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
5.10.1 Creating an Internet Connection . . . . . . . . . . . . . . . . . . . . . .102
5.10.2 Using Internet Sharing . . . . . . . . . . . . . . . . . . . . . . . . . . .102
5.11 Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103
5.11.1 Creating a Note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104
5.11.2 Converting Handwritten Notes to Text . . . . . . . . . . . . . . . . . . .104
5.11.3 Renaming a Note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
5.11.4 Recording Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
5.11.5 Synchronizing a Note . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
5.12 Pictures & Videos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
5.12.1 Moving Photos to the WORKBOUT PRO . . . . . . . . . . . . . . . . .108
5.12.2 Opening a Photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 87

 5.12.3 Deleting a Photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
5.12.4 Editing a Photo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
5.12.5 Creating a Slide Show . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
5.13 Internet Explorer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
5.13.1 Browsing Web Sites . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
5.14 Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
5.14.1 Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
5.14.2 Synchronizing E-mail with Outlook . . . . . . . . . . . . . . . . . . . . 112
5.14.3 Changing Synchronization Settings . . . . . . . . . . . . . . . . . . . . 113
5.15 Remote Desktop Mobile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
5.15.1 Connecting to a Terminal Server. . . . . . . . . . . . . . . . . . . . . . 114
5.15.2 Disconnecting without Ending a Session . . . . . . . . . . . . . . . . . 114
5.15.3 Ending a Session . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
5.16 Summit Client Utility (SCU). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
5.17 Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
5.18 Task Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
5.19 Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
5.20 Windows Live . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
5.21 Windows Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116

88 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 5: Programs
Programs

5.1 Programs
The Programs menu provides access to all the applications available on your hand-held.
•• Tap on Start>Programs to display this screen.
Tapping on an icon in this screen launches the associated applet.
Figure 5.1 Programs Tabs

5.2 Games

Your WORKABOUT PRO3 is equipped with a few standard games –– Bubble Breaker and
Solitaire –– should you feel the need to pass the time.

5.3 ActiveSync®

For PCs using the Microsoft Windows XP operating system, ActiveSync® –– Microsoft PC
connectivity software––can be used to connect the WORKABOUT PRO3 to PCs running this
software. By connecting the hand-held to a PC through your desktop docking station and

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 89

Chapter 5: Programs
Synchronization

running ActiveSync on the PC, you can view WORKABOUT PRO3 files, drag and drop
files between the hand-held and the PC, connect to the Internet, and so on.
If you need help installing ActiveSync, go to the website below and navigate to the Active-
Sync download information:
http://go.microsoft.com/fwlink/?LinkId=147001

5.3.1 Synchronization
For details about synchronizing your PC with you hand-held, visit the following Microsoft
internet site:
http://www.microsoft.com/windowsmobile/activesync/default.mspx

5.4 Calculator

Tapping on Start>Programs>Calculator displays a standard calculator with regular

functions.
•• Use your stylus to tap on the calculator buttons.

5.5 Office Mobile

This icon contains the following abridged Microsoft programs: Excel Mobile, OneNote
Mobile, PowerPoint Mobile and Word Mobile. Keep in mind that if Office Mobile is listed
in your Start menu, this icon will not be displayed in the Programs window.

5.5.1 Excel Mobile

Excel Mobile is an abridged version of Microsoft Excel, an electronic spreadsheet program.

If you’’re familiar the Excel application on your PC, you’’ll be able to navigate Excel Mobile.

90 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 5: Programs
Excel Mobile

In addition to providing the tools to manipulate text and numeric values like statistics, per-
centages, using formulas that perform calculations, and so on, this program can also include
graphics such as pie charts.
Excel Mobile allows you to copy Excel workbooks from your PC onto your WORKABOUT
PRO3 and update them while you’’re away from your desk.
•• Tap on Start>Programs>Office Mobile>Excel Mobile.
If Office Mobile is listed in your Start menu, tap on Start>Office Mobile and then tap on
Excel Mobile.
•• If a list of workbooks is displayed rather than a new sheet, you’’ll need to create a new
workbook. To create a workbook:
•• In Excel Mobile, tap the Menu>File>New.

5.5.1.1 Workbook Components

Columns

Address of selected text Entry bar

Cell
Rows Selected cell

Status bar Formula drop-down menu

Toolbar
Sheet1 drop-down menu
Menu bar

•• If the toolbar is not visible, tap on the View>Toolbar.

You can enter data, work with rows and columns and create formulas as you would when
working with Excel on your PC.
Using Excel Mobile Help
If you need help using this application, you can review the instructions in the associated help
files. To display Excel Mobile help files:
•• Launch the Excel Mobile program.
•• Tap on Start>Help, and review the instructions provided.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 91

Chapter 5: Programs
OneNote Mobile

5.5.2 OneNote Mobile

You can use OneNote Mobile to take notes wherever you are and then synchronize your
notes with a notebook section in the OneNote version on your PC. For example, you can:
•• Snap pictures of business cards on your WORKABOUT PRO3 and then bring them into
OneNote on your PC.
•• Create short text notes and voice recordings on your WORKABOUT PRO3 to remind
you about important meetings, ideas, etc. and synchronize them with your notes.
•• Prepare information in OneNote on your PC and then transfer it to your WORKABOUT
PRO3 where it will be available to you wherever you and your WORKABOUT PRO3
go.

Important: Remember that you must have Microsoft Office OneNote 2007 and the latest
version of ActiveSync installed on your PC before you can set up a partner-
ship between your WORKABOUT PRO3 and your PC.

Setting Up a Partnership
•• Start Office OneNote and ActiveSync on your PC.
•• Connect the WORKABOUT PRO3 to your PC; you can use a USB cable or a
Bluetooth connection.

92 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 5: Programs
OneNote Mobile

When a connection is established between the WORKABOUT PRO3 and your PC, Active-
Sync displays a New Partnership screen.

•• Choose Standard partnership, and tap on Next.

•• To share information between OneNote Mobile and Office OneNote 2007 on your PC,
tap Synchronize with this desktop computer, and then tap on Next.
•• Tap on Finish to begin the partnership between the WORKABOUT PRO3 and the PC.
Now you’’ll be able to pass notes back and forth between your PC and hand-held.
Creating A Note
•• If Office Mobile is listed in your Start menu, tap on Start>Office Mobile>OneNote
Mobile icon.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 93

Chapter 5: Programs
OneNote Mobile

If this is not the case, tap on Start>Programs>Office Mobile icon. Tap on the
OneNote Mobile icon.

•• Tap on New to create a note page. Begin typing.

•• When you complete your note, tap on Done.

Note: Remember that you can tap on the Menu softkey to Undo typing, add Formats (Bold,
Italic, Underline, Strikethrough), include Lists (Numbered, Bulleted, Clear)

94 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 5: Programs
OneNote Mobile

Using the OneNote Menu

Tapping on Menu displays a list of options to help you work with the OneNote Mobile
applet.

•• Undo, Redo, Cut, Copy and Paste: These commands operate in the same way as they
do in any Windows Office application.
•• Format: Tapping on this command lists the formatting options you can apply to your
note: Bold, Italic, Underline, Strikethrough and Clear All.
•• Take Picture: When you tap on this option, the WORKABOUT PRO3 switches to
camera mode so that you can snap a picture to include in your note.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 95

Chapter 5: Programs
OneNote Mobile

Press [ENTER] to snap a photo that is automatically inserted into your note.

•• Insert Picture: Tapping on this command automatically displays your My Pictures

folder where you can tap on an existing picture to insert it into your note.

96 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 5: Programs
OneNote Mobile

•• Insert Recording: When you tap on this command, a recording panel is displayed.

Cancel
Save
Play
Stop
Record

Tap on the Record button to record your message.

Tap on Stop when you’’ve completed your message.
Tap on Play to listen to your voice message.
To discard your message, tap on X –– the Cancel button.
To save your message, tap on OK. An audio icon is displayed in your note. You can tap
on it to listen to your message.

Synchronizing WORKABOUT PRO3 One Note With PC OneNote

•• Connect the WORKABOUT PRO3 to your PC using either a USB cable or Bluetooth.
When the connection is complete, take one of the following steps:

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 97

Chapter 5: Programs
Word Mobile

•• In Microsoft ActiveSync on your PC, choose Sync.

or
On your WORKABOUT PRO3, tap on Start>ActiveSync, and then tap on Sync.
During synchronization, the notes you created on your WORKABOUT PRO3 are copied to
a new Office OneNote 2007 notebook called OneNote Mobile on your PC. When synchroni-
zation is done, you can drag the transferred notes into any other sections and other
notebooks on your PC.

Note: If you prefer to synchronize WORKABOUT PRO3 notes automatically, you can set
up ActiveSync so that synchronization is continuous or occurs on a schedule. In
ActiveSync on your PC, in the Tools menu, tap Options, and then tap on the
Schedule tab.

5.5.3 Word Mobile

If you’’ve used Microsoft Word on your Mac or PC, Word Mobile will be familiar to you.
Keep in mind however that Word Mobile is designed for a small screen and limited memory.

Note: Keep in mind also that a Word document created on your PC can lose key formatting
features such as styles and tables if you make changes to it on your WORKABOUT
PRO3.

•• Tap on Start>Programs>Office Mobile>Word Mobile.

If Office Mobile is listed in your Start menu, tap on Start>Office Mobile and then tap on
Word Mobile.

98 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 5: Programs
Word Mobile

If you’’ve already create a Word Mobile document, it will be listed in the Word Mobile
window.

•• Tap on New in the softkey bar to create a new Word document.

Using Word Mobile Help
If you need help using this application, you can review the instructions in the associated help
files. To display Word Mobile help files:
•• Launch the Word Mobile program.
•• Tap on Start>Help, and review the instructions provided.

5.5.3.1 Data Entry Modes

In addition to the soft keyboard, you can enter text using Block Recognizer, Letter Recog-
nizer or Transcriber. Refer to ““Entering Text”” on page 83 for details.
You can also use the WORKABOUT PRO3 keyboard for data entry.

5.5.3.2 Sharing Documents with Your PC

Documents created on a PC are recognized by your WORKABOUT PRO3. However, some
formatting is lost when a Word document is converted to a Word Mobile document. This
loss also occurs when you open a .doc file and change it on the WORKBOUT PRO.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 99

Chapter 5: Programs
PowerPoint Mobile

Important: To avoid translation problems, you can work on copies of .doc files. In addi-
tion, keep in mind that you can use the Terminal Services Client program to
log onto a desktop PC that is also running Terminal Services, and then you
can use any program on your PC, including Microsoft Word (rather than
Word Mobile). Refer to ““Remote Desktop Mobile”” on page 114 for details.

5.5.4 PowerPoint Mobile

PowerPoint Mobile works just like the desktop version that may be installed on your PC. To
launch this program on your hand-held:
•• Tap on Start>Programs>Office Mobile>PowerPoint Mobile.
If Office Mobile is listed in your Start menu, tap on Start>Office Mobile and then tap on
PowerPoint Mobile.
Using PowerPoint Mobile Help
If you need help using this application, you can review the instructions in the associated help
files. To display PowerPoint help files:
•• Launch the PowerPoint Mobile program as described above.
•• Tap on Start>Help, and review the instructions provided.

5.6 Demo Scanner

If a scanner is installed in your unit, you can use the Demo Scanner applet to set up and test
your scanner.

•• Tap on Start>Programs>Demo Scanner icon.

A Demo Scanner dialog box is displayed.

100 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 5: Programs
File Explorer

•• Tap on the Settings button to display the Scanner Settings dialog box. Use this dialog
box to tailor the scanner settings for your hand-held.
•• Tap on the Scan button to test the scanner.

Important: For details about the Scanner Settings, refer toAppendix D: ““Bar Code
Settings””.

5.7 File Explorer

Windows Mobile 6.1 files are stored in folders and sub-folders that are accessible through
File Explorer. You can open, save, rename, copy and paste files in the same manner as you
would on any desktop PC.

Important: Refer to ““Managing Files and Folders”” on page 75 for details about this
program.

5.8 Getting Started

For information about the Getting Started applet, refer to ““The Getting Started Centre”” on
page 15.

5.9 PTSI Imager Demo

Note: This icon is only available when an HHP 5000 imager is installed in your unit.

To run a demonstration of the Teklogix Imager applet features:

•• Tap on Start>Programs>PTSI Imager icon.

Important: For details about this applet, refer to Appendix C: ““Teklogix Imagers
Applet””.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 101

Chapter 5: Programs
Internet Sharing

5.10 Internet Sharing

This option allows you to use your WORKABOUT PRO3 to connect your PC to the Inter-
net. Before you can use Internet Sharing, you must make certain that you have established a
data connection on your WORKABOUT PRO3.

5.10.1 Creating an Internet Connection

Follow the steps in this section only if you have not already setup an Internet connection.
You’’ll need the following information before you begin:
From your cellular service provider: data connectivity information, access point name
and PAP/CHAP security settings.
From your Internet service provider (ISP) or wireless service provider: access point
name and password and any additional security information.
For a GPRS, 1xRTT or dialup connection:
•• Tap on Start>Settings>Connections tab. Tap on the Connections icon.
•• Under My Work Network, tap Add a new modem connection.
•• Type a name for the connection, and choose Cellular Line (GPRS), or for 1xRTT con-
nections, choose Cellular Line. Tap on Next.
•• Type the phone number or access point name provided by your service provider, and
tap Next.
•• Type the credentials supplied by your service provider, and tap Finish.

5.10.2 Using Internet Sharing

•• Make certain that your data connect is running, and that you can access the Internet
from the WORKABOUT PRO3.
If you are using a USB cable to connect to your PC, you will need to disable the ActiveSync
USB connection.
•• On your PC, open the ActiveSync window, and click on File>Connection Settings.
•• Disable Allow USB connection by clicking in the checkbox to the left of this option.
•• Connect the WORKAOBUT PRO to your PC using Bluetooth or a USB cable.

102 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 5: Programs
Notes

•• On your WORKABOUT PRO3, tap Start>Programs>Internet Sharing.

•• Choose the PC Connection type––USB or Bluetooth.
•• Choose the network connection that the WORKABOUT PRO3 should use to connect
to the Internet.
•• Tap Connect. It takes approximately 30 seconds to establish a connection. (If you are
prompted to turn on Bluetooth, tap Yes.)
If your are using a Bluetooth connection, execute the following steps on your PC:
•• Click Start>Control Panel>Network Connections.
•• Right-click on Bluetooth Network Connections, and click on View Bluetooth
Network Devices.
•• If the WORKABOUT PRO3 is listed as a Network Access Point, click Connect. If it is
not listed, click Create a new connection and use the New Connection Wizard to add
the WORKABOUT PRO3 to the list.

5.11 Notes

The Notes application is an electronic notepad you can use to jot down your ideas quickly.
You can enter text using the soft keyboard, the WORKABOUT PRO3 keyboard, or you can
write on the screen using your stylus. You can also record
a message.
Notes can also be shared through e-mail and synchronization with your PC.
•• Tap on Start>Programs>Notes to launch this application.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 103

Chapter 5: Programs
Creating a Note

•• If a blank Note like the sample screen here is not displayed, tap on New in the
softkey bar.

5.11.1 Creating a Note

•• Choose an entry mode for your note.
To enter text with the soft keyboard, Transcriber or the Block or Letter Recognizer, tap the
stylus on the arrow to the right on the soft keyboard icon to choose your text
input method.
To use your stylus to handwrite on the screen, tap on the pen icon .

Important: Refer to ““Entering Text”” on page 83 for text entry details.

•• Compose your note using the method you’’ve chosen.

•• Tap on OK when you’’re done.
Your note is automatically saved. The file name is the first line of the note if you used the
keyboard––otherwise, it’’s named Note1, Note2 and so on.

5.11.2 Converting Handwritten Notes to Text

When you use the pen tool, you can write notes in your own handwriting and keep them as
is, if you like. You can also teach the WORKABOUT PRO3 to recognize your handwriting
and convert it into printed text.
To convert handwriting into text:

104 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 5: Programs
Converting Handwritten Notes to Text

•• Tap on the pen tool and compose a note using your stylus.

•• Tap on Menu>Tools>Recognize.
The text in the note is converted from handwritten to printed text.

Note: To convert only a specific portion of your handwritten note into printed type, tap the
stylus just before the first letter of the text, pause for a second, and then drag your
stylus across the text you want to select. Then, tap on Tools>Recognize to convert
only the highlighted text.

Failed Conversions
The Recognize tool sometimes gets the conversion wrong. If some words are not
converted properly:
•• Press and hold the stylus on the incorrectly converted word.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 105

Chapter 5: Programs
Renaming a Note

•• In the pop-up menu, choose Alternative to display a list of possible alternatives to the
incorrectly converted word. Your handwritten version is displayed along the top of
the menu.
Figure 5.2 Incorrect Conversions

•• Tap on the correct word in the list.

•• If the correct word is not listed, as is the case in the sample screen above, tap on the soft
keyboard icon to display the soft keyboard, and type the correct word.

5.11.3 Renaming a Note

•• Press and hold the stylus on the file name in the Notes screen that you want to rename.
In the pop-up menu, choose Rename/Move, or
Tap the file name to select it, and tap on Menu>Rename/Move.
•• In the Name field, type the new name, and tap OK.

5.11.4 Recording Notes

It’’s sometimes easier to record a note than to write it down just to make certain that you’’ve
captured an idea before it drifts away. To make an audio recording:
•• Tap on New to open a fresh note.

106 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 5: Programs
Recording Notes

•• Tap on Menu>View Recording Toolbar.

Volume
Skip to end
Skip to beginning

Record
Stop
Play
Progress
Indicator

•• Tap on the Record button––a beep alerts you that your device is now ready to record.
•• Begin speaking into the microphone on the WORKABOUT PRO3, or move the hand-
held to within a few feet of the source of the sound you want to record.
•• Tap on the Stop button when you’’ve completed your recording.
•• Tap on OK to save the note.
A speaker icon is displayed in the note indicating the presence of a recording within
the note.

•• To play the recorded note, tap on the speaker icon.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 107

Chapter 5: Programs
Synchronizing a Note

5.11.5 Synchronizing a Note

Like Tasks, Contacts and so on, the Notes program can be synchronized with Outlook on
your PC. In this way, all notes, recordings and drawings created in the Notes program are
copied to your PC and can be edited in Outlook’’s Notes module.
•• To review the steps required to synchronize a note, with a Note page opened, tap on
Start>Help.
Follow the steps in the WORKABOUT PRO3 help file to synchronize your note.

5.12 Pictures & Videos

Pictures & Videos is a photo and video viewing program. This program also provides a
number of tools that allow you to crop, adjust picture contrast and brightness, zoom in and
out of photos and save your adjustments.

Important: The Pictures & Videos program can only display .bmp or .jpg formats.
Photos in other formats will need to be converted on your PC before they are
transferred to the WORKABOUT PRO3.

5.12.1 Moving Photos to the WORKBOUT PRO

•• Connect your device to your PC with ActiveSync.
•• On your PC, using Windows Explorer (right-click My Computer and click on Explorer),
drag photos from their folder to the Mobile Device, My Pictures folder.

108 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 5: Programs
Opening a Photo

5.12.2 Opening a Photo

•• Tap on Start>Programs>Pictures & Videos. You’’ll see a thumbnail of your photos.

Note: If you’’ve stored your photos on a storage card, you’’ll need to tap on the storage card
icon to display your photos.

•• Tap on a thumbnail to open a photo.

5.12.3 Deleting a Photo

•• Press and hold the stylus on the thumbnail photo you want to delete to display a pop-up
menu. Tap on Delete.
•• Confirm your choice when prompted.

5.12.4 Editing a Photo

•• Tap a thumbnail photo to open it.
•• Tap on Menu>Edit.
The Rotate command is now displayed in the softkey bar. Additional editing tools are now
listed in the Menu.

5.12.5 Creating a Slide Show

To view a slide show:
•• Tap on the Menu>Play Slide Show.
The slide show begins––in slide show mode, photos are displayed for about five seconds, one
after the other.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 109

Chapter 5: Programs
Internet Explorer

•• To display the slide show tool bar, tap anywhere on the photo.
Pause Previous
Play Next
Flip View Close

5.13 Internet Explorer

You can connect to Internet Explorer in two ways: by connecting the WORKABOUT PRO3
directly to the Internet or by connecting through your PC while the hand-held is attached via
ActiveSync (see ““ActiveSync®”” on page 89).

5.13.1 Browsing Web Sites

There is little difference between the standard Internet Explorer found on your PC and that
found on your WORKABOUT PRO3, sometimes referred to as Pocket Internet Explorer.
You can enter URLs, set a ‘‘home page’’, turn images on and off, e-mail links to friends, and
so on.
To go to a web site:
•• Connect your WORKABOUT PRO3 to the Internet. (If you’’re not certain how to do
this, tap on Start>Internet Explorer to display a blank window. Next, tap on
Start>Help and follow the steps listed.)

110 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 5: Programs
Messaging

•• Tap on Start>Programs>Internet Explorer to open Internet Explorer.

If Internet Explorer is also from the Today screen, tap on Start>Internet Explorer.

•• Tap on the address bar –– the field near the top of the screen where URLs are entered –– to
highlight the current URL.
•• Type a new URL in the address bar.
Tapping on the softkeys in the softkey bar at the bottom of the screen display Internet
Explorer commands like those you find on your PC.

5.14 Messaging

The Messaging program is used to send and receive e-mail on your WORKABOUT PRO3.
To send and receive e-mail, you’’ll need to synchronize your PC or connect to a Post Office
Protocol 3 (POP3) or Internet Message Access Protocol 4 (IMAP4) mail server.
For each of these methods, you need to set up an e-mail account with one exception––
Outlook e-mail accounts are set up by default.

5.14.1 Folders
If you use an Outlook e-mail account, messages in the Inbox folder in Outlook are automat-
ically synchronized with your WORKABOUT PRO3. You can use ActiveSync on your PC

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 111

Chapter 5: Programs
Synchronizing E-mail with Outlook

to synchronize additional folders. The folders and messages you move are mirrored on
the server.
For POP3 accounts, if you move e-mail messages to a folder you create, the link between
the messages on the WORKABOUT PRO3 and the copies on the mail server are broken.
When you next connect, the mail server will recognize that the messages are missing from
the WORKABOUT PRO3 Inbox folder and delete them from the server, preventing duplica-
tion of messages. Keep in mind however that you will not have further access to messages
that you moved to folders from anywhere except with the hand-held.
For IMAP4 accounts, the folders you create and the messages you move are reflected on the
server, making messages available any time whether you connect to your mail server from
your WORKABOUT PRO3 or your PC.

5.14.2 Synchronizing E-mail with Outlook

By synchronizing the WORKABOUT PRO3 Messaging program with Outlook on your PC,
your e-mail is available on both the hand-held and on your PC.

Note: Synchronizing e-mail does not require that the WORKABOUT PRO3 have an inde-
pendent connection to the Internet.

•• In ActiveSync on your PC, tap on Tools>Options in the tool bar at the top of the screen.

•• Make certain that a check mark is displayed in the checkbox next to E-mail. Tap on OK.

112 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 5: Programs
Changing Synchronization Settings

Once you check E-mail for synchronization, Outlook e-mail messages are synchronized as
part of the general synchronization process. The next time you synchronize with Active-
Sync, the e-mail in Outlook on your PC will be transferred to the Messaging program on
your WORKABOUT PRO3.

5.14.3 Changing Synchronization Settings

•• In ActiveSync on your PC, double-tap the E-mail item in the Sync Options tab.

•• Tap on the Select Folder button.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 113

Chapter 5: Programs
Remote Desktop Mobile

•• Add a checkmark next to the folders in this screen that you want to synchronize with
your WORKABOUT PRO3, and tap on OK.
The E-mail Synchronization screen is displayed again.
•• If you want to accept file attachments, add a check mark next to Include file attach-
ments. To limit the size, tap on Only if smaller than, and specify a size in the KB box.
•• Tap on OK.

5.15 Remote Desktop Mobile

This program allows you to log onto a Windows Terminal Server and run the desktop pro-
grams from the server on your WORKABOUT PRO3.

5.15.1 Connecting to a Terminal Server

•• Tap on Start>Programs>Remote Desktop Mobile
•• In the Server dialog box, type the Terminal Server name or TCP/IP address, or
choose a server from the drop-down menu.
•• Tap on Connect.
•• In the Remote Desktop Connection window, type your user name, password, and
domain (if required). Tap on OK.

5.15.2 Disconnecting without Ending a Session

Important: These commands are accessed from the Start menu in the Terminal Services
screen used to access the PC’’s commands. Do NOT use the Start menu on
your WORKABOUT PRO3.

•• In the Remote Desktop Connection window, tap on Start>Shutdown.

•• Tap on Disconnect>OK

5.15.3 Ending a Session

•• In the Terminal Services Client screen, tap on Start>Shutdown.
•• Tap on Log Off>OK.

114 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 5: Programs
Summit Client Utility (SCU)

5.16 Summit Client Utility (SCU)

The SCU provides the utilities you will need to configure the Summit 802.11g Compact
Flash radio module, model number RA2041 so that it can communicate through a wireless
LAN network effectively and securely. Refer to ““Using the SCU to Connect to the WLAN””
on page 17 for setup details.

5.17 Search

•• Tap Start>Programs, and then tap on the Search icon.

•• In the Search for field, type the item for which you’’re looking.
•• To narrow your search, tap on the Type drop-down menu and choose from a list of pre-
existing programs. To search through all files, leave this option at All Data.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 115

Chapter 5: Programs
Task Manager

5.18 Task Manager

The Task Manager lists all running tasks (applications) or processes. This applet provides a
number of options to manage these. Refer to ““Task Manager”” on page 171 for details.

5.19 Tasks

This program helps you stay ahead of your schedule by managing your tasks, appointments,
and so on. For details about Tasks, refer to ““Task Notification”” on page 68.

5.20 Windows Live

This applet provides access to group of Windows Live services from your WORKABOUT
PRO3such as Hotmail, Messenger, Maps, and so on. Tapping on this icon displays a setup
wizard that will walk you through setting up a Windows Live ID.

5.21 Windows Media

Windows Media Player Mobile allows you to play music and videos on your WORK-
ABOUT PRO3. You can use Windows Media to play digital audio and video files that are
stored on your device or on the Web.
•• To work with this applet, tap on Start>Programs>Windows Media.
•• To find detailed instructions about this option, tap on Start>Help.

116 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

SETTINGS 6
6.1 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123
6.2 Personal Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123
6.3 App Launch Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124
6.4 Buttons Icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126
6.4.1 Up/Down Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126
6.4.2 One Shots. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127
6.4.3 Keyboard Macro Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . .128
6.4.4 Unicode Mapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130
6.4.5 Scancode Remapping. . . . . . . . . . . . . . . . . . . . . . . . . . . . .131
6.4.6 Lock Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134
6.5 Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135
6.5.1 Input Method Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135
6.5.1.1 Word Completion . . . . . . . . . . . . . . . . . . . . . . . . . .139
6.5.2 Options––Additional Choices . . . . . . . . . . . . . . . . . . . . . . . . .139
6.6 Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140
6.7 Menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141
6.7.1 Start Menu Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141
6.8 Microphone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142
6.9 Owner Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .143
6.10 Phone (Windows Mobile 6.1 Professional Only) . . . . . . . . . . . . . . . . . . .143
6.11 Sound & Notifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .143
6.11.1 Sounds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144
6.11.2 Notifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144
6.12 Today Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145
6.12.1 Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145
6.12.2 Items. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145
6.13 System Tab Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146
6.14 About . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 117

 6.15 About Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
6.16 Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
6.16.1 Battery Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
6.16.2 External Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
6.16.3 Intensity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
6.17 Certificates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
6.17.1 Choosing A Certificate. . . . . . . . . . . . . . . . . . . . . . . . . . . 152
6.18 Clock & Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
6.19 COM Port Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
6.20 Dr. Debug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
6.20.1 Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
6.20.2 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
6.20.3 Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
6.21 Encryption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
6.22 Error Reporting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
6.23 External GPS (Global Positioning System) . . . . . . . . . . . . . . . . . . . . . 156
6.24 Manage Triggers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
6.24.1 Trigger Mappings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
6.24.1.1 Add And Edit Trigger Mapping . . . . . . . . . . . . . . . . . 160
6.25 Managed Programs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
6.26 Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
6.26.1 Main Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
6.26.2 Storage Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
6.27 Power Icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
6.27.1 Battery Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
6.27.2 Advanced Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
6.27.3 Battery Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
6.27.4 Built-In Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
6.27.5 Card Slots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
6.27.6 Suspend Threshold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
6.27.6.1 Suspend Threshold And Estimated Battery Backup . . . . . . . 167
6.27.7 Wakeup Keys Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
6.27.8 Suspend Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168

118 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

6.28 Regional Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .169
6.29 Remove Programs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .170
6.30 Screen Icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .170
6.31 Task Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .171
6.32 Teklogix Imagers Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .173
6.33 Teklogix Scanners Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .174
6.33.1 Bar Code Settings –– The Scanner Menu . . . . . . . . . . . . . . . . . .175
6.33.2 Options Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .175
6.33.2.1 Double Click Parameters . . . . . . . . . . . . . . . . . . . . .175
6.33.2.2 Display Parameters . . . . . . . . . . . . . . . . . . . . . . . .176
6.33.2.3 Data Handling . . . . . . . . . . . . . . . . . . . . . . . . . . .177
6.33.3 Translations Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .177
6.33.3.1 Case Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179
6.33.4 Ports Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180
6.33.4.1 Tether Port (\$device\COM21:) . . . . . . . . . . . . . . . . . .181
6.33.4.2 Port Replicator Ports A, B And C . . . . . . . . . . . . . . . . .184
6.34 Total Recall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .186
6.34.1 Creating A Backup Profile . . . . . . . . . . . . . . . . . . . . . . . . .187
6.34.2 Restoring A Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . .190
6.34.3 Viewing a Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .191
6.34.4 Deleting a Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .192
6.35 TweakIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .193
6.35.1 Advanced Interface And Network Settings . . . . . . . . . . . . . . . . .194
6.35.2 Advanced Services Settings. . . . . . . . . . . . . . . . . . . . . . . . .195
6.35.3 Radio Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .196
6.35.4 User System Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . .197
6.35.5 Registry Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .198
6.36 Windows Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .198
Navigation Bar Connectivity Hotkeys. . . . . . . . . . . . . . . . . . . . . . . . . . .199
6.37 Connections Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .198
6.38 Beam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .201
6.39 Bluetooth Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .201
6.39.1 Paired Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .202
6.39.2 Device Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .204

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 119

 6.39.2.1 Discovering and Removing Devices . . . . . . . . . . . . . . . 204
6.39.2.2 Filtering By Class of Device (COD) . . . . . . . . . . . . . . . 205
6.39.2.3 Device Pop-up Menu . . . . . . . . . . . . . . . . . . . . . . . 205
6.39.2.4 Pairing a Device . . . . . . . . . . . . . . . . . . . . . . . . . 206
6.39.3 Servers Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208
6.39.4 Mode Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
6.39.5 About Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210
6.39.6 The Bluetooth GPRS Phone . . . . . . . . . . . . . . . . . . . . . . . . 210
6.40 Connection Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
6.40.1 Port Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213
6.40.2 Call Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214
6.41 Connections –– Connecting To The Internet . . . . . . . . . . . . . . . . . . . . . 214
6.41.1 Modem Connection Setup . . . . . . . . . . . . . . . . . . . . . . . . . 215
6.41.1.1 Advanced Modem Settings . . . . . . . . . . . . . . . . . . . . 218
6.42 Wireless Manager Icon. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219
6.42.1 Flight Mode –– Disabling Wireless Components . . . . . . . . . . . . . . 219
6.42.2 Setting Up A Network Card . . . . . . . . . . . . . . . . . . . . . . . . 220
6.42.3 Network Adaptor Cards . . . . . . . . . . . . . . . . . . . . . . . . . . 220
6.42.4 Changing Network Card Settings . . . . . . . . . . . . . . . . . . . . . 222
6.42.5 VPN Connection Setup . . . . . . . . . . . . . . . . . . . . . . . . . . 222
6.42.6 Managing An Existing Connection . . . . . . . . . . . . . . . . . . . . 223
6.42.6.1 Editing A Connection. . . . . . . . . . . . . . . . . . . . . . . 223
6.42.6.2 Changing A Connection Setting Name . . . . . . . . . . . . . . 223
6.42.7 Selecting A Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
6.42.8 Proxy Server Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225
6.42.8.1 Changing Advanced Proxy Server Settings . . . . . . . . . . . 226
6.43 Wireless Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227
6.44 Wireless WAN (Windows Mobile 6.1 Classic Only) . . . . . . . . . . . . . . . . 227
6.44.1 Softkey Bar Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227
6.44.2 Establishing A Connection. . . . . . . . . . . . . . . . . . . . . . . . . 228
6.44.3 Disconnecting From A Network . . . . . . . . . . . . . . . . . . . . . . 229
6.44.3.1 Shutting Down The Wireless WAN User Interface. . . . . . . . 229
6.44.4 Advanced Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 230
6.44.4.1 Entering A PIN . . . . . . . . . . . . . . . . . . . . . . . . . . 230
6.44.4.2 Error States . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230
6.44.5 Tools Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231

120 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 6.44.5.1 Data Connection Configuration . . . . . . . . . . . . . . . . . .232
6.44.5.2 Security Configuration. . . . . . . . . . . . . . . . . . . . . . .235
6.44.5.3 Network Configuration . . . . . . . . . . . . . . . . . . . . . .236
6.44.5.4 Driver Mode Configuration . . . . . . . . . . . . . . . . . . . .237
6.44.5.5 Modem Information . . . . . . . . . . . . . . . . . . . . . . . .238
6.44.6 SMS Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .240
6.44.6.1 New SMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .240
6.44.6.2 Inbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .241
6.44.6.3 Outbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .242
6.44.6.4 SMS Configuration . . . . . . . . . . . . . . . . . . . . . . . .242

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 121

 Chapter 6: Settings
Settings

6.1 Settings
The Settings screen is divided into three tabs –– Personal, System and Connections.

Note: Keep in mind that the Phone applet is only available when your hand-held is
equipped with Windows Mobile 6.1 Professional.

•• Tap on Start>Settings to display this screen.

Figure 6.1 Settings Tabs

6.2 Personal Settings

The Personal tab allows you to tailor the general behaviour of your WORKABOUT PRO3
such as defining input methods, Start menu options, owner information, password assign-
ment, sound specifications, and so on.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 123

Chapter 6: Settings
App Launch Keys

6.3 App Launch Keys

This icon allows you to map a key to an application so that you can then launch the applica-
tion from a single key-press.

To assign an application key:

•• Tap the Add button.

•• Press the key you want to use to launch an application. (If an unsupported key is
pressed, a message appears on this screen letting you know.)
The cursor moves to the App field and a new screen is displayed where you can choose the
application to which you want to assign the application key. If you need to, you can Browse

124 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
App Launch Keys

through the information in your hand-held until you locate the application you want
to launch.

•• Once you’’ve selected the file you want to map, tap on OK.
The cursor moves to the Data field. You can use this field if you need to define special pa-
rameters to your application launch key. If you don’’t want to assign any parameters, you can
leave the Data field blank. If, for example, you want to assign an application launch key to
launch the Word Mobile application, you can leave this field blank. If you want to assign an
application launch key that will open a specific document in the Word Mobile application,
you need to browse to and choose that document while the cursor is in the Data field.
•• Tap on OK.

•• If you need to Edit, Remove or Add another App Launch Key, you can do it from this
final screen. Otherwise, tap on OK to save you Application Launch Key.
•• To launch the application you chose, press the application key you assigned.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 125

Chapter 6: Settings
Buttons Icon

6.4 Buttons Icon

•• Tap on this icon to display your options.

Note: The ‘‘Program Buttons’’ option is not available on this unit.

6.4.1 Up/Down Control

Sliding the Delay before first repeat bar to the left decreases the delay between key repeats
while sliding the bar to the right increases the repeat delay time.
Sliding the Repeat rate bar to the left slows the rate at which an [Up/Down] button repeats
when pressed. Sliding the bar to the right increases the key repeat rate.

126 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
One Shots

6.4.2 One Shots

The options in this tab allows you to determine how modifier keys on your WORKABOUT
PRO3 behave. For each modifier key––[ALT], [SHIFT], [CTRL], [FN/ORANGE] and
[FN/BLUE] –– you have the following options in the drop-down menu: Lock, OneShot, and
OneShot/Lock.

Important: Once you’’ve assigned a One Shot mode to a modifier key, you need to tap on
the OK button at the top of the tab to activate your selection.

Lock
If you choose Lock from the drop-down menu, pressing a modifier key once locks it ‘‘on’’
until you press the modifier key a second time to unlock or turn it off.
OneShot
If you choose OneShot, the modifier key remains active only until the next key is pressed.
OneShot/Lock
OneShot/Lock allows you to combine these functions. When you choose this option and you
press the modifier key once, it remains active only until the next key is pressed.
If you press the modifier key twice, it is locked ‘‘on’’, remaining active until the modifier key
is pressed a third time to turn it ‘‘off’’.
Show Modifier Key State
When you enable Show modifier key state, a shift-state indicator icon

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 127

Chapter 6: Settings
Keyboard Macro Keys

replaces the soft keyboard icon in the softkey bar at the bottom of the screen. When a mod-
ifier key is pressed, a square in this icon is highlighted. A ‘‘locked’’ modifier key is displayed
in the shift-state indicator icon with a black frame around it.

6.4.3 Keyboard Macro Keys

A macro has 20 programmable characters (or ““positions””). The macro keys can be pro-
grammed to replace frequently used keystrokes, along with the function of executable
keys including [ENTER], [BKSP] and [DEL] ([FN/BLUE]-[BKSP]), function keys, and
arrow keys.
Recording And Saving A Macro
Only the WORKABOUT PRO3 C is equipped with Macro keys. You can program up to 10
macro keys.
•• In the Macro menu, highlight a macro key number––for example, macro 1 to assign a
macro to macro key [M1]. Tap on the Record button.

128 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Keyboard Macro Keys

A Record Macro screen is displayed.

•• Type the macro sequence you want to assign to the Macro key. You can type text and
numbers, and you can program the function of special keys into a macro.
•• When you’’ve finished recording your macro sequence, tap on the Stop Recording
button.
A new screen––Verify Macro––displays the macro sequence you created.
•• Tap on the Save button to save your macro. Your macro key sequence is listed in the
Macro screen.
•• Tap on OK to save your macro key assignment.
Executing A Macro
•• Press the macro key to which you’’ve assigned the macro. For example, if you created a
macro for macro key ‘‘1’’, press [M1] ([FN/ORANGE][O]) to execute the macro.
Deleting A Macro
•• In the Macros tab, highlight the macro number you want to delete.
•• Tap on the Delete button.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 129

Chapter 6: Settings
Unicode Mapping

6.4.4 Unicode Mapping

•• Tap on the Unicode Mapping tab to display this screen.

The Unicode Mapping tab is used to map combinations of virtual key values and [CTRL]
and [SHIFT] states to Unicode™™ values. This tab shows the configured Unicode character
along with the Unicode value. For example, ““a (U+0061)”” indicates that the character ““a”” is
represented by the Unicode value ““0061””, and so on. Keep in mind that Unicode configura-
tions are represented as hexidecimal rather than decimal values.
All user-defined Unicode mappings are listed in the Unicode Mapping tab in order of virtual
key value, and then by order of the shift state. If a Unicode mapping is not listed, the
Unicode mapping is mapped to the default Unicode value.
Adding And Changing Unicode Values

Important: Changes to Unicode mappings are not saved until you exit the
Unicode Mapping tab by tapping on [OK].

130 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Scancode Remapping

•• Tap on the Add/Change button.

•• Highlight a value in the Unicode mapping list.

•• Position the cursor in the Unicode Mapping field, and type a Unicode value for the
highlighted key.

Note: To add a shifted state––[SHIFT] and/or [CTRL], tap on the checkbox next to ‘‘SHIFT
Pressed’’ and/or ‘‘CTRL Pressed’’.

Removing Unicode Values

•• In the Unicode Mapping tab, highlight the item you want to delete, and tap on the
Remove button.

6.4.5 Scancode Remapping

A scancode is a number that is associated with a physical key on a keyboard. Every key has
a unique scancode that is mapped to a virtual key, a function, or a macro. Scancode Remap-
ping allows you to change the functionality of any key on the keyboard. A key can be
remapped to send a virtual key (e.g. VK_F represents the ‘‘F’’ key; VK_RETURN represents
the [ENTER] key, etc.), perform a function (e.g. turn the scanner on, change volume/con-
trast, etc.) or run a macro.
There are three different tables of scancode mappings: the Normal table, the Blue table and
the Orange table. The Normal table defines unmodified key presses; the Blue table defines
key presses that occur when the [FN/BLUE] modifier is on; the Orange table defines key

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 131

Chapter 6: Settings
Scancode Remapping

presses that occur when the [FN/ORANGE] modifier is on. The default mappings of these
scancodes can be overwritten for each of these three tables using Scancode Remapping.

The first column in the Scancode Remapping tab displays the Scancodes in hexidecimal. If
the scancode is remapped to a virtual key, that virtual key is displayed in the next column la-
belled ‘‘V-Key’’. A virtual key that is ‘‘Shifted’’ or ‘‘Unshifted’’ is displayed in the third column
labelled ‘‘Function’’.
If the scancode is remapped to a function or a macro, the first and second columns
remain blank while the third column contains the function name or macro key number
(e.g., Macro 2).
Adding A Remap
To add a new remapping:
•• Tap the Add button at the bottom of the dialog box.

132 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Scancode Remapping

The Remap Scancode dialog box is displayed.

•• Type the scan code in hexidecimal in the field labelled Scancode.

Note: The ‘‘Label’’ field displays the default function of the scancode you
are remapping.

Virtual Key, Function And Macro

The radio buttons at the bottom of the dialog box allow you to define to what the scan code
will be remapped to: Virtual Key, Function or Macro.
When Virtual Key is selected, you can choose to force [SHIFT] to be on or off when the
virtual key is sent. If No Force is selected, the shift state is dependent on whether the shift
state is on or off at the time the virtual key is sent.
When Function is selected, a list of valid functions appears in the dialog box.
When Macro is selected, the macro keys available on your unit are listed in the dialog box.
•• Choose Virtual Key>Function or Macro.
•• Choose a function from the Function list, and tap on OK.
Editing A Scancode Remap
•• In the Scancode Remapping tab, tap on the remap you want to edit.
•• Tap on the Edit button, and make the appropriate changes.
•• Tap on OK to save your changes.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 133

Chapter 6: Settings
Lock Sequence

Removing A Remap
•• In the Scancode Remapping tab, highlight the scancode you want to delete, and tap on
the Remove button.
•• Tap on OK.

6.4.6 Lock Sequence

The Lock Sequence tab allows you to lock the hand-held keyboard to prevent keys from
being pressed accidentally when, for example, the unit is inserted in a holster.

•• To lock the keyboard, tap in the checkbox next to Enable key lock sequence.
•• Tap in the checkbox next to Keyboard locked at startup.
•• In the Key sequence drop-down menu, choose the key sequence you need to type to
unlock the keyboard.

Note: It is useful to leave the ‘‘Show popup message’’ enabled (default) so that anyone
attempting to use the WORKABOUT PRO3 keyboard will see the key sequence they
will need to enter to unlock the keyboard displayed on the screen.

134 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Input

A locked keyboard icon is displayed in the softkey bar when the keyboard is locked.

Locked Keyboard
Icon

•• Type the key sequence to unlock the keyboard.

6.5 Input
The Input applet provides access to text input options you can use to tailor the soft keyboard,
block recognizer, letter recognizer and transcriber along with voice recording options.

6.5.1 Input Method Tab

A drop-down menu next to Input method allows you to tailor your methods of input––Block
Recognizer, Keyboard, Letter Recognizer and Transcriber.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 135

Chapter 6: Settings
Input Method Tab

Block Recognizer
Block Recognizer teaches you how to conform your handwriting to what the hand-held
can recognize.

Important: Refer to ““Block Recognizer and Letter Recognizer”” on page 85 for

additional details.

Keyboard Options

This screen is displayed when you choose Keyboard in the Input method drop-down menu.
You can use it to customize the soft keyboard. You can choose Large Keys or Small Keys to
increase or decrease the size of the keys displayed on the soft keyboard.
If you enable Use gestures for the following keys––these keys are removed from the soft key-
board. Gestures are handwriting shortcuts for the keyboard keys.
Letter Recognizer Options
Letter Recognizer teaches you how to conform your handwriting to what the hand-held can
recognize.

Important: Refer to ““Block Recognizer and Letter Recognizer”” on page 85 for additional
details.

To display additional letter recognition options, tap on the Options button in the Letter
Recognizer screen.

136 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Input Method Tab

Figure 6.2 Letter Recognizer Quick Settings

These options allow the Letter Recognizer to better interpret any specialized strokes and
accents you may wish to use.
Transcriber Options

Note: Before you can display the Options for Transcriber, you need to select Transcriber
as the active input method. Tap on the arrow to the right of the keyboard icon in the
taskbar, and choose Transcriber.

When you choose Transcriber as the input method, three tabs of options are available to you
–– Quick Settings, Inking and Advanced.

Quick Settings
The Quick Settings tab allows you choose the writing direction––the icons indicate direction.
In addition, you can choose to enable or disable the display of the Intro screen and the sound
each time you launch the Transcriber.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 137

Chapter 6: Settings
Input Method Tab

Inking
In the Inking tab, you are presented with a number of options. Recognition Delay allows you
to determine the time delay between writing something on the Transcriber screen and its
recognition into printed text.

Enabling Add space after automatically adds a space after each word you write. The Pen
option allows you to choose the line Width and Colour. Finally, tapping on Match Letter
Shapes to your writing displays a screen in which you can learn how to form letters to help
the hand-held to recognize the most often used characters.
Advanced
In this tab, Shorthand allows you to create a shortened word that the Transcriber will recog-
nize and expand into a complete word automatically. You can also insert data such as a date
or run a program.

138 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Options––Additional Choices

6.5.1.1 Word Completion

This tab speeds the writing process regardless of the input method chosen. When you begin
entering a word, this option displays what it assumes is the complete word, saving you
having to type the word in its entirety. You can also tailor how and when you want word sug-
gestions made.

6.5.2 Options––Additional Choices

This tab offers a few choices including choosing a voice recording format, zoom percentage
for writing and typing, automatic capitalization of the first letter in a sentence and automatic
scrolling when you’’ve reached the bottom of the screen.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 139

Chapter 6: Settings
Lock

6.6 Lock
To protect the data stored in your WORKBOUT PRO, you can assign a password that must
be entered each time the unit is switched on.
•• Tap on Start>Settings, and then tap on the Lock icon.

It is critical that you store your password in a safe place. If you forget it, a ‘‘clean start’’ must
be performed by certified Psion Teklogix personnel. A clean start returns the hand-held to
factory settings. Only the data stored in a CF or SD memory card are preserved.
•• Tap in the checkbox next to Prompt if device unused to turn on password protection.
•• Choose the amount of time that the unit can remain idle before you are prompted to
enter your password.
•• In the Password type drop-down menu, choose the type of password you prefer to
assign. Simple PIN allows you to enter a minimum of four numeric characters. Strong
alphanumeric requires a minimum of 7 characters and must contain at least three of the
following: uppercase and lowercase alpha characters, numbers and punctuation.
•• Tap on the Hint tab to enter a word or phrase that will remind you of your password.
The WORKABOUT PRO3 will display the hint after the wrong password is entered
five times.
•• Tap on OK. A dialog box asks whether or not you want to save you password settings.
Tap on YES to save your password assignment.

140 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Menus

6.7 Menus
•• Tap on Start>Settings>Menu icon to display options to help customise menus.

6.7.1 Start Menu Tab

This tab allows you to define the items that will be listed in your Start menu.

•• In the Start Menu dialog box, tap on the items you want to appear in your Start menu.
The checked items will be listed in your Start menu.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 141

Chapter 6: Settings
Microphone

6.8 Microphone

Use this dialog box to adjust the gain for the specific microphones associated with your
hand-held.
•• Tap on the drop-down menu, and choose the microphone for which you want to adjust
the gain.

•• Slide the tab at the top of the dialog box to the left to decrease the gain and to the right to
increase the gain.
Tapping on the Default button sets the current microphone you’’ve chosen to the default
gain. Tapping on Default All sets all microphones listed to their default gain.

142 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Owner Information

6.9 Owner Information

This icon allows you to add your personal information to the WORKABOUT PRO3. Some
of this information will be displayed in the desktop Today screen.

Important: Refer to ““Ownership Information”” on page 67 for details about this option.

6.10 Phone (Windows Mobile 6.1 Professional Only)

This option allows you to adjust phone settings such as the ring type and tone, choose phone
services such as barring calls, and you can also determine network selections.

Important: Refer to ““Managing Phone Settings”” on page 26 for details about this option.

6.11 Sound & Notifications

This icon allows you to specify when your WORKABOUT PRO3 will emit sounds.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 143

Chapter 6: Settings
Sounds

6.11.1 Sounds

•• Tap in the checkboxes and radio buttons to enable the event(s) that will cause your unit
to emit a sound.

6.11.2 Notifications

Tap here to play Tap here to end

your ring choices the ring test

This tab allows you to determine how you are notified about different events.
•• Choose an event from the Events drop-down menu.
•• Choose the type of reminder––a special sound, a message or a flashing light ––from the
drop-down menu next to Play sound.

144 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Today Screen

6.12 Today Screen

This option allows you to tailor the appearance of the Today screen–– the desktop screen.

6.12.1 Appearance

This screen allows you to customize the background displayed on the Today screen.
•• Choose the background you want to use from the list.

6.12.2 Items

This tab allows you to choose and to sort the item(s) that you want listed in the Today screen.
•• Tap in the checkbox to the left of the item(s) you want displayed in the Today screen.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 145

Chapter 6: Settings
System Tab Settings

•• To rearrange the list of items, highlight the item you want to move up or down and tap
on the Move Up or Move Down button. Keep in mind that the Date cannot be moved.

6.13 System Tab Settings

To display the icons grouped in the System tab:
•• Tap on Start>Settings, and tap on the System tab.

6.14 About

Tapping on Start>Settings>System tab, and then the About icon displays a grouping of tabs
that provide device information.
Version Tab
This tab outlines the Windows Mobile 6.1 version, processor information, memory size and
a description of the expansion card, if one is in use.
Device ID Tab
This tab provides fields in which you can assign a Device name and Description (optional)
for the WORKABOUT PRO3. This name is used by the WORKABOUT PRO3 to identify
itself to other devices.
Keep in mind that this must be a unique name across a network. If you are unable to connect
to a network because another device with the same name is already connected, you’’ll need
to assign a new name here.

146 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
About Device

Copyrights
The Copyright tab lists the copyright information for the software loaded on your
WORKABOUT PRO.

6.15 About Device

Tapping on the About Device icon under Settings>System tab provides access to three tabs
related to your WORKABOUT PRO3. The Properties tab lists hardware information related
to your WORKABOUT PRO3. The Copyrights tab lists the copyrights that apply to your
hand-held. The Experience tab allows you to choose a category to help you define your Ex-
perience. These categories include Microsoft settings, Psion Teklogix settings and Custom
settings in a drop-down menu. Each category contains a group of default settings. If you
change a default setting, the category is automatically changed to Custom settings.

6.16 Backlight
Tapping on Start>Settings>System tab followed by the Backlight icon allows you to deter-
mine the power properties of the WORKABOUT PRO3.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 147

Chapter 6: Settings
Battery Power

6.16.1 Battery Power

This tab allows you to tailor the WORKABOUT PRO3 backlight behaviour to best preserve
battery life.
•• To define how long the backlight should stay on when the WORKABOUT PRO3 is not
in use, tap in the checkbox to the left of Turn off backlight if device is not used for.
•• Tap on the drop-down menu, and choose the number of seconds or minutes the back-
light will remain on when the hand-held is idle.
•• To Turn on backlight when a button is pressed or the screen is tapped, tap in the
checkbox to the left of this option.

148 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
External Power

6.16.2 External Power

This tab determines the behaviour of the backlight when the hand-held is using external
rather than battery power.

Important: Refer to ““Battery Power”” on page 148 for details.

6.16.3 Intensity

This tab is used to adjust the light intensity of the display backlight and the keyboard back-
light. Sliding the bar to the left lowers the light intensity, and sliding it to the right raises
the intensity.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 149

Chapter 6: Settings
Certificates

6.17 Certificates
•• Tap on Start>Settings, and then tap on the System tab.
•• Tap on the Certificates icon.

A public key is transmitted as part of a certificate. The certificates listed in the Certificates
tabs ensure that the submitted public key is, in fact, the public key that belongs to the sub-
mitter. The hand-held checks that the certificate has been digitally signed by a certification
authority that the hand-held explicitly trusts.
Your WORKABOUT PRO3 has certificates already preinstalled in the unit. Personal certif-
icates establish your identity, intermediate certificates, as the name suggests, identifies
intermediate certification authorities and root certificates establish the identity of the servers
with which you can connect.
Personal Tab

The Personal tab lists the name of the certificate issuer and the expiration date.
•• To view additional information about a personal certificate, tap on a certificate in
the list.
•• To delete a certificate, tap and hold the stylus on the item you want to delete until a pop-
up menu is displayed. Tap on the Delete command.

150 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Certificates

Intermediate Certificates
The items in this list help identify intermediate certification authorities.

Root Certificates

•• To view details about a certificate——who issued the certificate, to whom it was issued,
the issue date and the expiry date——tap on a certificate in the list.
•• To delete a certificate, tap and hold the stylus on a certificate.
•• In the pop-up menu, tap on the Delete command.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 151

Chapter 6: Settings
Choosing A Certificate

6.17.1 Choosing A Certificate

Normally, certificates already configured for your network are chosen automatically by the
WORKABOUT PRO3. If a certificate cannot be chosen automatically, you must choose it
from the Certificates list.
•• To choose a certificate, tap the desired certificate. Your WORKABOUT PRO3 will
connect automatically.

6.18 Clock & Alarms

Located under Start>Settings>System tab, the Clock & Alarm icon allows you to set the
current date and time, and it allows you to set up to three alarms.

Important: Refer to ““Today’’s Date, Clock and Alarm”” on page 65 for details about these
options.

6.19 COM Port Manager

The COM Port Manager dialog box lists the device names and COM port mappings stored
in the registry for the currently active and for dynamic devices like port replicators, USB
serial dongles and virtual ports.

152 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Dr. Debug

The COM Port Manager allows you to edit the COM port mappings and add new ports for
Bluetooth external connections.

Note: A grey box to the left of a Device name indicates that this is a fixed port; the COM
Port assignment cannot be changed.

For those ports that can be changed, each COM Port has a drop-down menu.
•• Tap on COM# in the Ports column to display a menu from which you can choose the
COM Port you want to assign.
If you assign a conflicting port, an asterisk * is displayed to the left of device name indicat-
ing that this port has already been assigned.
A double-dash ““---”” in the Port column indicates that a COM port has not been assigned.
Tapping on the drop-down menu allows you to assign a port.

6.20 Dr. Debug

Dr. Debug is an error diagnostic tool.
•• Tap on Start>Settings. Tap on Control Panel followed by the Dr. Debug icon.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 153

Chapter 6: Settings
Status

6.20.1 Status

This tab indicates the status (on/off) of the tools. Tapping on Browse logs displays error logs
for your review.

6.20.2 Settings

•• Choose an Error Level from the drop down menu.

•• To change the location where debug information will be stored, tap on the button to the
right of the Log Folder option.

154 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Utilities

6.20.3 Utilities

Two utilities are available: NetLog and RilLog. The NetLog utility is used to log network
traffic. The RilLog utility captures Radio Interface Layer (RIL) debug outputs. When you
tap on the Start button, debug data is collected so that, if necessary, it can be forwarded to a
Psion Teklogix technician for evaluation.

6.21 Encryption
This option allows you to encrypt the data on your storage card.
•• Tap on Start>Settings>System tab>Encryption icon.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 155

Chapter 6: Settings
Error Reporting

6.22 Error Reporting

Error Reporting allows you to enable or disable Microsoft error reporting prompts.

6.23 External GPS (Global Positioning System)

With a Global Positioning System (GPS) receiver, you can locate your exact position on a
map. However, even without a GPS receiver, several different mapping programs can run on
your hand-held.

156 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
External GPS (Global Positioning System)

•• Tap on Start>Settings>System>External GPS.

•• Tap on the GPS program port drop-down menu and choose the communication (COM)
port that the GPS software will use to communicate with the GPS receiver.

Note: Your WORKBOUT PRO may automatically detect the GPS receiver that you are
using and enter the settings in the Hardware tab. If not, you’’ll need to enter this
information yourself. You can find this information in the user manual of the GPS
receiver.

•• Tap on the Hardware tab, and choose a GPS hardware port and the appropriate
Baud rate.

Windows Mobile 6.1 automatically manages access to the GPS receiver. However, some
programs may not work with automatic configuration. If this is the case:

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 157

Chapter 6: Settings
Manage Triggers

•• Tap on the Access tab, and disable Manage GPS automatically (recommended).

You can go to www.microsoft.com/pocketstreets if a map-viewing program is not included

with your hand-held, and copy the file to your hand-held.

6.24 Manage Triggers

Manage Triggers allows you to configure how bar code scanners and other devices such as
RFID readers are triggered. You can configure the trigger ID for each trigger button for both
single- and double-click, and the double-click time.
•• Tap on Start>Settings>Manage Triggers.

158 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Trigger Mappings

6.24.1 Trigger Mappings

A trigger mapping is an association between a particular key on the keyboard and a driver or
application, the module(s)–– sometimes referred to as ““trigger consumer(s)”” –– of the trigger
source. Along with keyboard keys, trigger sources can also be grip triggers, external hard-
ware triggers or software-based. When the specified key is pressed, the trigger consumer
(for example, a decoded scanner) is sent a message.

Important: It is not possible to have two or more identical mappings——for example [F1]
cannot be mapped to the Non-Decoded Scanner twice——even if the trigger
type is different.
A keyboard key that is used as a trigger source will no longer generate key
data or perform its normal function. For example, if the space button is used
as a trigger source, it will not be able to send space characters to
applications.

Double-Click
When a key is pressed and released, then pressed again within the configured time (between
0 to 1000 milliseconds), a double-click occurs. See also ““Trigger Press Type”” on page 161.
Show All Modules
By default, the trigger mapping list only shows active mappings. Mappings for drivers or
applications that are not currently active are not normally displayed. By checking this
checkbox, all mappings, both active and inactive, are displayed.
Add
Tapping this button brings up the Add mapping dialog (see below), so that you can add new
trigger mappings.
Edit
Tapping this button brings up the Edit mapping dialog, so that you can edit existing
trigger mappings.
Remove
Tapping this button removes an existing mapping.
OK
The OK button in the top right of the Manage Triggers screen saves all changes made. If the
[ESC] key is pressed, all changes made will be discarded.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 159

Chapter 6: Settings
Trigger Mappings

6.24.1.1 Add And Edit Trigger Mapping

•• Tap on Add to add a new trigger map, or tap on Edit to edit an existing trigger map.

Trigger Key
This drop-down list allows you to specify the source of the trigger events, such as the Grip
Trigger, Left Scan, etc., for the trigger module selected.

Note: It is possible to map the same source to different modules (trigger consumers——for
example, to both the Imager and Non-Decoded Scanner. If so, both devices/opera-
tions will occur simultaneously. This is not recommended in most cases, especially
with devices such as Imagers or RFID Readers.
It is also possible to map different sources to the same module (trigger consumer) ——
for example, two different trigger keys can be mapped to the RFID File System.

160 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Managed Programs

Add Key
Only existing trigger sources are shown in the Source combo-box. To add a new source to
this list, tap on the Add Key button. A dialog box pops up, allowing you to select the key-
board key to use as a trigger source.

Trigger Press Type

You can enable either an Up/Down or Double Click response to a trigger press. Normally,
when a trigger (keyboard key, etc.) is pressed and released, a ““trigger down”” event is sent to
the ““owner”” —— that is, the application receiving the trigger press information——followed by
a ““trigger up””. If Double Click is chosen in this menu, when the trigger is pressed, released,
and then pressed again, a ““double-click”” event will occur. If a mapping with the Up/down
type has also been configured for the same source, it will only receive the first set of
trigger events.
Module To Trigger
This identifies the driver or application receiving the trigger presses.
Show All Modules
By default, inactive owners are not shown. By checking this checkbox, all owners, both
active and inactive, are displayed.

6.25 Managed Programs

Managed Programs lets you view, download and install applications that are deployed by
the System Center Mobile Device Manager (a server-side solution that helps enable IT to
have control of their device deployment with respect to security, management and access to
the corporate network). To access Managed Program:

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 161

Chapter 6: Settings
Memory

•• Tap on Start>Settings>System tab>Managed Programs icon.

Note: Your system administrator can provide the details you’’ll need to use Managed
Programs effectively.

6.26 Memory
This applet allows you to view memory use and storage card memory allocation.

162 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Main Tab

6.26.1 Main Tab

This tab lists the memory allocated for file and data storage and for program storage.

6.26.2 Storage Card

The Storage Card screen indicates the total storage card or RAM disk memory along with
the amount in use.

6.27 Power Icon

This icon allows you to view and manage battery use.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 163

Chapter 6: Settings
Battery Tab

6.27.1 Battery Tab

This tab allows you to view the remaining battery capacity of the main battery and the inter-
nal, backup battery.

6.27.2 Advanced Tab

The Advanced tab allows you to manage battery consumption.

On Battery Power
When the WORKABOUT PRO3 is operating on battery power, this option allows you to de-
termine how long the unit will remain on when it is not in use.
•• Tap in the checkbox to the left of On battery power to enable this option. Tap in the
drop-down menu to choose the number of minutes your unit can remain idle before it
shuts down.

164 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Battery Details

On External Power
When the hand-held is drawing external rather than battery power, this option allows you to
determine the number of minutes the unit will remain on when not in use.
•• Tap in the checkbox to the left of On external power to enable this option. Tap in the
drop-down menu to choose the number of minutes your unit can remain idle before it
shuts down.

6.27.3 Battery Details

This tab lists the specifications and battery capacity status of the battery installed in the
WORKABOUT PRO3. This is a view-only screen.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 165

Chapter 6: Settings
Built-In Devices

6.27.4 Built-In Devices

Built-In Devices Power Status

This section of the dialog box allows you to enable (provide power) to the device(s) installed
in your unit. Keep in mind that the content of this screen varies depending on the devices in-
stalled in your hand-held. Tapping on OK activates your selections.

6.27.5 Card Slots

Slot Power Status

When you select one or more of the card slots listed, power is supplied to the enabled slot(s).
Clicking on the Apply button activates your selections. Keep in mind that if the characters on
this button appear in grey typeface, the checked slots have already been enabled.

166 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Suspend Threshold

6.27.6 Suspend Threshold

This applet allows you to determine the amount of battery power that you want to reserve in
the main battery to protect the data stored in the WORKABOUT PRO3.

6.27.6.1 Suspend Threshold And Estimated Battery Backup

The Estimated Battery Backup is the amount of battery power that is reserved to protect data
until a charged battery can be installed in the hand-held. When the main battery capacity is
depleted up to the Estimated Battery Backup reserve specified in the Suspend Threshold tab,
the hand-held shuts off automatically and uses the reserve power to preserve the data stored
on the WORKABOUT PRO3. Once the hand-held shuts down, it cannot be switched on
until a fresh battery is installed, or the unit is inserted in a docking station or cradle.
•• Slide the Suspend Threshold button to the right to increase the battery capacity
reserved for backup purposes. Data will be preserved to a maximum of 124 hours.
•• Slide the Suspend Threshold button to the left to decrease the power reserved for
backup purposes; this increases the hand-held’’s operating time –– the amount of time the
hand-held will operate before shutting down –– but reduces the power reserved for
backup purposes to a minimum of 24 hours.
The backup battery draws a trickle charge from the reserved main battery power to maintain
the data even after the unit power is shut down. It will protect the data stored in the
WORKABOUT PRO while the main battery is swapped for a fully charged one.

Important: Once the main battery is removed, the backup battery will preserve the data
stored on the WORKABOUT PRO3 for approximately 5 minutes. It is criti-
cal that you install a charged main battery before this time elapses.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 167

Chapter 6: Settings
Wakeup Keys Tab

6.27.7 Wakeup Keys Tab

This option allows you to define which key can be pressed to wake the hand-held from a
suspend state.
If the Two key wakeup option is checked, the operator will need to press two keys ––
[FN/BLUE][ENTER] –– to switch the hand-held on.

6.27.8 Suspend Mode

When this option is enabled, any time the WORKABOUT PRO3 enters suspend mode (e.g.,
following an idle timeout), Go to standby on suspend forces the WORKABOUT PRO3 to
enter Standby mode. In Standby mode, the display is turned off, the keyboard is locked and
the touchscreen is locked. The processor remains on so that any running applications will

168 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Regional Settings

continue while the hand-held is in a Standby state. In addition, the radios continue to run,
making them instantly available when the unit is powered up again.

6.28 Regional Settings

To display the Regional Settings screen, tap on Start>Settings, and then tap on the System
tab followed by the Regional Settings icon.

•• Tap on the drop-down menu to choose your language and region.

Once you’’ve selected a language and region, you may need to adjust the way numbers, cur-
rency, the time and the date appear in your WORKABOUT PRO3.
•• Tap on the tab associated with each of the items and choose how each item will be dis-
played on your WORKABOUT PRO3.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 169

Chapter 6: Settings
Remove Programs

6.29 Remove Programs

Tapping on the Remove Programs icon displays a screen listing the programs that can be
removed from your unit.
•• To remove a program, highlight it and then click on the Remove button.

6.30 Screen Icon

This icon allows you to align (calibrate) your touchscreen, turn ClearType on and off and
adjust the size of the text displayed on the WORKABOUT PRO3 screen.

170 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Task Manager

•• Tap Start>Settings>System tab, and then tap on the Screen icon.

Important: Refer to ““Aligning (Calibrating) the Touchscreen”” on page 47 for details.

6.31 Task Manager

The Task Manager screen lists all running tasks (applications) or processes. This applet pro-
vides a number of options to manage these.
•• Tap on Start>Settings. Tap on the System tab and then the Task Manager icon –– the
Task Manager screen is opened.

•• To shut down an application, highlight the program in the list, and tap on the End
Task softkey in the taskbar at the bottom of the screen.
Task Manager Menu
The Task Manager menu provides additional options to help you manage your applications.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 171

Chapter 6: Settings
Task Manager

•• Tap on the Menu softkey in the taskbar.

•• Switch To: Makes the highlighted application active.

•• End All Tasks: Shuts down all applications listed.
•• View: Allows you to list either all running applications or all processes.
•• Sort By: Allows you to sort active applications or processes based on Memory size,
CPU or application or process Name.
•• Refresh: Updates the list of applications or processes.
•• Exit: Closes the Task Manager.

172 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Teklogix Imagers Settings

6.32 Teklogix Imagers Settings

The Teklogix Imagers applet is used to create, modify, delete and activate imager settings.
The principle uses of the applet are to decode bar codes and to capture images.

Note: This icon is only when displayed when the appropriate imager is installed in your
hand-held.

To launch this applet:

•• Tap on Start>Settings>System tab, and then tap on the Teklogix Imagers icon.

Important: Refer to Appendix C: ““Teklogix Imagers Applet”” for details about this
applet.

A PTSI Imager demo applet is also provided to illustrate how the imager works.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 173

Chapter 6: Settings
Teklogix Scanners Settings

•• Tap on Start>Programs, and then tap on the PTSI Imager icon.

6.33 Teklogix Scanners Settings

The Teklogix Scanners icon in the Settings menu provides access to dialog boxes in which
you can tailor bar code options and choose the bar codes your scanner will recognize.
•• Tap on Start>Settings, and then tap on the System tab followed by the Teklogix
Scanner icon.

174 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Bar Code Settings –– The Scanner Menu

6.33.1 Bar Code Settings –– The Scanner Menu

The drop-down menu to the right of the Scanner option allows you to choose from one of
the following: Decoded (internal), Decoded (HHP), and Decoded (Intermec ISCP).
The symbologies listed change to reflect the scanner you choose and the bar codes
it supports.

Important: Appendix D: ““Bar Code Settings”” provides descriptions of the bar codes
listed in the scanner menus.

6.33.2 Options Tab

This tab allows you to tailor the double-click parameters and the display options associated
with your scanner.

6.33.2.1 Double Click Parameters

Click
Time (msec)
This parameter controls the maximum gap time (in milliseconds) for a double-click. If the
time between the first and second clicks of the scanner trigger is within this time, it is con-
sidered a double-click. The allowable range is 0 to 1000. A value of zero disables this
feature.
A double-click produces different results depending on whether or not a value is assigned in
the ““Click Data”” parameter. When a value is not assigned for the ““Click Data””, double-click-
ing the scanner trigger overrides the target dot delay set in the ““Dot Time”” parameter and

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 175

Chapter 6: Settings
Options Tab

initiates a normal scan sweep. If a value is assigned for the ““Click Data”” parameter, double-
clicking the scanner trigger inserts the ““Click Data”” value rather than initiating a scan.
Click Data
For both integrated and external scanners, this parameter determines which character is sent
to the application installed in your hand-held following a double-click. A dialog box ap-
pears, asking that you press the key you want to insert. The ASCII/Unicode key value of the
keypress is displayed.

6.33.2.2 Display Parameters

Scan Result
When this parameter is enabled, the type of bar code and the result of the scan appear on the
screen. Note that this information is only displayed after a successful decode and is visible
only while the scanner trigger is pressed. When the trigger is released, this information is
cleared from the screen.
Scan Indicator
When this parameter is enabled, the laser warning logo appears on the display whenever the
scanner is activated.
Scan Result Time (sec)
The value assigned to the ““Scan Result Time (sec)”” parameter determines how long the scan
results of a successful scan are displayed on the screen. Time is measured in seconds, and a
value of ““0”” (zero) disables the parameter. When you choose this option, a dialog box
appears where you can enter a value.

Note: To remove the scan result from the screen before the ““Result Time”” has expired, point
the scanner away from the bar code and press the trigger.

Good Scan Beep And Bad Scan Beep

These parameters determine whether or not the hand-held emits an audible scanner ‘‘beep’’
when a good (successful) scan or a bad (unsuccessful) scan is performed. Set these parame-
ters to either on to enable the beeper or off to disable it.
Soft Scan Timeout
This parameter is used by the SDK ““Scan”” function (soft-scan: starting a scan session via the
SDK function, instead of a physical user trigger press). The value assigned to this parameter
determines the soft-scan timeout from 1 to 10 sec. (default is 3 sec.).

176 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Translations Tab

Scan Log File

If this parameter is enabled, the input barcode and the modified/translated output bar code
are logged in the file \Flash Disk\ScanLog.txt. Keep in mind that if the ““Scan Log File”” is
enabled, there is a slight performance effect when performing multiple scans since the log
file is written to persistent storage.

6.33.2.3 Data Handling

This option allows you to choose the code page your WORKABOUT PRO3 will use to
display data –– Default Local ASCII or ISO-8859-1 Latin 1.
Codepage:
Tapping on this option displays a window in which you can define the code page your
WORKABOUT PRO3 will use.

If you choose Default Local ASCII, the code page of the local OS is used. For example, if
the local OS uses double-byte Chinese characters, choosing this option will filter data
through the local ASCII of that OS and display it accurately, in this example, using double-
byte characters.
If you choose ISO-8859-1 Latin 1, data will be displayed according to the character mapping
of this Latin 1 code page, ignoring the local OS code page.

6.33.3 Translations Tab

The Translations tab allows you to define up to 10 cases, each consisting of up to 10 rules in
sequential order. Only one case will be applied to a bar code and a case will only be applied

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 177

Chapter 6: Settings
Translations Tab

if all rules specified in the case are successful –– if a rule within a case fails, the entire case
fails.

•• In the Translation tab, tap on the Case # to create rules.

178 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Translations Tab

•• Tap on the No rule drop-down menu to display the rules.

When you choose a rule, an associated screen is displayed in which you can define the rule.

6.33.3.1 Case Rules

The case rules are defined as follows:
•• No rule –– ignored.
•• Match at index –– matches the match string at a specified index.
•• Match and replace at index –– matches the match string at a specified index and
replaces/changes it.
•• Replace at index –– replaces/changes unspecified data in a given range.
•• Add barcode prefix/suffix –– adds a global prefix or suffix.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 179

Chapter 6: Settings
Ports Tab

•• Verify barcode size –– verifies the bar code size. This rule should generally be assigned
first, before creating subsequent rules.
•• Search and replace –– replaces all instances of the match string. (Note that this rule
cannot fail.)

Note: Keep in mind that the effects of previously applied rules must be taken into account
when creating subsequent rules. For example, if the bar code size is important, it
should be checked before any rules that might change the size are applied.

Translation information about the status of each case/rule is displayed in the scan log file
(see ““Scan Log File”” on page 177) when enabled. This is useful if a case fails, and you are
trying to determine why a rule is failing.

6.33.4 Ports Tab

While you cannot configure the scanner, you can configure communications with a
serial decoded scanner using the options in this tab.

180 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Ports Tab

6.33.4.1 Tether Port (\$device\COM21:)

Enabled
This parameter allows you to turn the tether port on (enable) and off.
Baud
Double-tapping on this parameter displays a pop-up window in which you can choose an ap-
propriate baud rate.

Data Bits
This parameter determines the number of data bits included in each asynchronous data byte.
Most devices use 8 bit data bytes. Double-tapping on this option displays a pop-up window
in which you can choose either 7 or 8 data bits.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 181

Chapter 6: Settings
Ports Tab

Parity
This parameter determines the type of parity checking used on the data going through the
tether port. Double-tapping on this option displays a pop-up window in which you can
choose the appropriate Parity.

Stop Bits
This parameter specifies the number of stop bits –– 1, 1.5, 2 –– used for asynchronous
communication.
Trigger On Sequence And Trigger Off Sequence
If a SICK scanner connected to the WORKABOUT PRO3 port requires a serial stream of
data bytes to trigger the scanner on and another to trigger the scanner off, the Trigger On Se-
quence and Trigger Off Sequence parameters allow you to define these serial streams.

182 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Ports Tab

Double-tapping on Trigger On Sequence or Trigger Off Sequence displays a screen with a

hex array of 10 elements.

These parameters work in conjunction with Manage Triggers sending on and off data
streams to the trigger module you assigned. For example, supposed you launch Manage
Triggers and choose Decoded Scanner as the ‘‘module to trigger’’. Next, you assign a ‘‘trigger
key’’ –– for this example, . (period). To define the serial stream of data bytes to control the on
and off function of the ‘‘trigger key’’, enter a hex value in the Trigger On Sequence and the
Trigger Off Sequence fields. When you press the trigger key, the Trigger On Sequence is
sent and when you release the trigger key, the Trigger Off Sequence is sent, turning the
trigger key on and off.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 183

Chapter 6: Settings
Ports Tab

6.33.4.2 Port Replicator Ports A, B And C

The following COM ports are available: COM5:, COM6: and COM7:.

Note: Each port provides identical parameters to help you set up the port you choose. They
are described in this section.

Enabled
This parameter allows you to turn this port on (enable) and off.
Baud
Double-tapping on this parameter displays a pop-up window in which you can choose an ap-
propriate baud rate.

184 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Ports Tab

Data Bits
This parameter determines the number of data bits included in each asynchronous data byte.
Most devices use 8 bit data bytes. Double-tapping on this option displays a pop-up window
in which you can choose either 7 or 8 data bits.
Parity
This parameter determines the type of parity checking used on the data going through the
tether port. Double-tapping on this option displays a pop-up window in which you can
choose the appropriate Parity.

Stop Bits
This parameter specifies the number of stop bits –– 1, 1.5, 2 –– used for asynchronous
communication.
Trigger On Sequence And Trigger Off Sequence
If a SICK scanner connected to the WORKABOUT PRO3 port requires a serial stream of
data bytes to trigger the scanner on and another to trigger the scanner off, the Trigger On Se-
quence and Trigger Off Sequence parameters allow you to define these serial streams.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 185

Chapter 6: Settings
Total Recall

Double-tapping on Trigger On Sequence or Trigger Off Sequence displays a screen with a

hex array of 10 elements.

These parameters work in conjunction with Manage Triggers sending on and off data
streams to the trigger module you assigned. For example, supposed you launch Manage
Triggers and choose Decoded Scanner as the ‘‘module to trigger’’. Next, you assign a ‘‘trigger
key’’ –– for this example, . (period). To define the serial stream of data bytes to control the on
and off function of the ‘‘trigger key’’, enter a hex value in the Trigger On Sequence and the
Trigger Off Sequence fields. When you press the trigger key, the Trigger On Sequence is
sent and when you release the trigger key, the Trigger Off Sequence is sent, turning the
trigger key on and off.

6.34 Total Recall

Total Recall is a Psion Teklogix utility developed to back up/restore applications
and settings.

Note: In Windows Mobile 6.1, the registry and installed programs are stored in the Flash
file system and are not lost on reset. However, in special cases where Psion Teklogix
personnel find it necessary to perform a clean start, this will reset not only the regis-
try settings to factory defaults, but will also erase any files or applications stored or
installed on the built-in Flash file system, including any Total Recall profiles. This is
why any data that needs to be protected must be stored on a SD/MMC card or exter-
nally to the device on a USB memory stick or on a PC.

186 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Creating A Backup Profile

•• Tap on Start>Settings>System tab. Tap on the Total Recall icon.

6.34.1 Creating A Backup Profile

In the start up screen, you can choose from four options: Create Profile, Restore Profile,
View Profile and Delete Profile.
•• Tap on the Create Profile button to begin the process.
Profile Information

This dialog box displays the default profile name, the type of restore –– AutoRestore or Man-
ualRestore, and the possible storage destination for the profile file.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 187

Chapter 6: Settings
Creating A Backup Profile

•• To change the Profile Name (optional), tap on the [...] button to the right of the Profile
Location field.
•• In the Name field, type a new name. (You may need to move the onscreen keyboard
down to make the Name field visible.)
•• Tap on OK to save the new profile name.
•• Next, choose the profile Type you want to create:
- AutoRestore –– creates a profile that automatically restores itself following a cold reset
or a clean reset.
- ManualRestore –– creates a backup that is manually restored by the operator.
•• Finally, if you want to choose another location for your backup file (optional), tap on the
[...] button to the right of the Profile Location field.
•• Navigate to the new location, and tap on OK to save it.
•• Tap on the [-->] (Next) button.
Defining the Type of Backup

Default Backup
Default Backup is selected so that all installed or copied files, database entries, and the Reg-
istry are saved. Choose Advanced Backup only if you want to tailor your backup.

188 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Creating A Backup Profile

Advanced Backup

Choosing Advanced Backup allows you to define what you would like to include in your
backup profile.

•• Tap in the checkbox next to the option(s) listed here to tailor how what you want
included in the backup.
Once you’’ve defined the type of profile you want to create:
•• Tap on the Create Profile button.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 189

Chapter 6: Settings
Restoring A Profile

The options you chose to back up appear in on the screen as the backup progresses. When
the backup is complete, the last item in the list indicates the location and name of the backup
profile.

6.34.2 Restoring A Profile

To manually restore a profile:
•• In the Total Recall home screen, tap on Restore Profile.
•• Tap on the [...] button to the right of the Profile field, and locate your backup file.

•• Tap on the backup profile you want to restore.

190 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Viewing a Profile

•• In the Profile restore screen, click on the [-->] (Next) button.

•• In the final screen, click on Restore Profile to restore the files to your WORKABOUT
PRO3.

6.34.3 Viewing a Profile

To view a profile:
•• In the Total Recall home screen, tap on View Profile.
•• Tap on the [...] button to the right of the Profile field, and locate your backup file.

•• Tap on the backup profile you want to view.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 191

Chapter 6: Settings
Deleting a Profile

•• In the Profile view screen, click on the [-->] (Next) button.

In the final screen, click on View Details to display the backup file on your WORKABOUT
PRO3.

6.34.4 Deleting a Profile

•• In the Total Recall home screen, tap on Delete Profile.

•• Locate your backup file, and tap on it.

192 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
TweakIT

A warning pop-up screen appears asking if you’’re certain that you want to delete this file.

•• Tap on Yes to delete the file.

6.35 TweakIT
•• Tap on Start>Settings>System tab.
•• Tap on the TweakIT Settings icon.

This utility allows you to ‘‘tweak’’ or adjust Advanced system settings (interface, network
and servers), User settings (font size and docking port message), and provides a
Registry Editor.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 193

Chapter 6: Settings
Advanced Interface And Network Settings

6.35.1 Advanced Interface And Network Settings

Enable IPv6

This option allows you to enable Internet Protocol, version 6, that has been published to use
128-bit IP address (replacing version 4).
Modem Logging

When this option is enabled, the WORKABOUT PRO3 logs AT commands (e.g., dial-out
information, password string, etc.) that the administrator can monitor for debugging pur-
poses. Modem commands are stored in: \MdmLog.txt.

194 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Advanced Services Settings

6.35.2 Advanced Services Settings

SNTP (Simple Network Time Protocol) Server

The SNTP Server Name typed in this dialog box is used to synchronize WORKABOUT
PRO3 time with that of the time server. A warm reset must be performed once the server
name has been entered.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 195

Chapter 6: Settings
Radio Features

6.35.3 Radio Features

AP Density

This option allows you to determine the signal strength at which the WORKABOUT PRO3
radio will begin searching for a new Access Point (AP): High, Medium or Low. If this option
is set to High, the radio will begin searching for a new Access Point while still at a fairly
strong signal strength. Setting AP Density to Low will cause the radio to wait until the signal
strength is significantly low before attempting to connect to another Access Point.
Depending on your site configuration –– for example, the shelving, the Access Point cover-
age, etc. –– a higher setting may improve through-put, increase and maintain signal strength,
and reduce missed transmissions.
Radio Power Management

When this option is enabled, access points that support it will use Radio Power Management
guidelines to control the WORKABOUT PRO3 radio. Access points determine how often

196 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
User System Setting

the WORKABOUT PRO3 radio enters sleep mode when no activity is detected to reduce
power consumption. Another benefit is that when Radio Power Management is enabled,
even when no activity is detected, the access point does not disassociate the
WORKABOUT PRO3.

6.35.4 User System Setting

Docking Port Message

Checking this box blocks the message that normally pops up on the display when the
WORKABOUT PRO3 is docked.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 197

Chapter 6: Settings
Registry Editor

6.35.5 Registry Editor

This option is reserved for senior administrators who have a strong understanding of
registry keys and values. Careless registry editing can cause irreversible damage to the
WORKABOUT PRO3.

6.36 Windows Update

This program checks for software updates, and if found, downloads updates to your WORK-
ABOUT PRO3. You can choose to have updates checked automatically, or if you prefer, you
can determine when your unit will check for updates.

6.37 Connections Tab

This tab is used to setup connections using Bluetooth, 802.11 radios, and you can also set up
Wireless WAN connections.
The Wireless WAN icon is only visible when Windows Mobile 6.1 Classic is installed in your
WORKABOUT PRO3.

198 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Connections Tab

•• Tap on Start>Settings>Connections tab to display your connection options.

Navigation Bar Tap on these connectivity hotkeys

to display Notification Bubbles
Notification Bubble

Navigation Bar Connectivity Hotkeys

Some of the connectivity icons in the Navigation Bar along the top of the screen are hotkeys
that offer shortcuts to connection setups. Tapping on a hotkey displays a bubble that pro-
vides information about your connections and provides a shortcut to the Wireless Manager
applet where you can set up your connections.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 199

Chapter 6: Settings
Connections Tab

Automatic Network Detection

If a wireless network is available when you switch on your unit, a notification bubble may
appear letting you know which networks have been found. You can choose a network
from here.

Tapping on Connect in the softkey bar at the bottom of the screen will automatically connect
to a network that’’s already been set up. Tapping on Settings in the network bubble will
launch the Wireless Manager applet.
If you prefer not see this notification bubble, you can tap on the Menu button in the softkey
bar, and choose not to display the notification bubble.
Multiple Notifications
If more than one item is detected, all the items can be accessed by tapping on the small mul-
tiple notification icon shaped like a word bubble in the Navigation Bar. Tapping on it

200 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Beam

displays a group of notification icons –– in the sample screen below, a missed call icon and a
new voice message icon.
Multiple Notification Icon
Missed Call Icon New Voice Message Icon

Tapping on any of these icons displays an associated notification bubble with information
about and access to the missed call(s) or voice message(s).

6.38 Beam

If your unit is equipped with an IrDA end-cap, tapping on Beam allows you to enable
Receive all incoming beams so that your unit can accept incoming data from other
IrDA devices.

6.39 Bluetooth Setup

Bluetooth is a global standard for wireless connectivity for digital devices and is intended
for Personal Area Networks (PAN). The technology is based on a short-range radio link that
operates in the ISM band at 2.4 GHz. When two Bluetooth-equipped devices come within
range of each other, they can establish a connection. Because Bluetooth utilizes a radio-
based link, it does not require a line-of-sight connection in order to communicate.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 201

Chapter 6: Settings
Paired Tab

Note: The Bluetooth radio uses an internal antenna.

Turning the Bluetooth Radio On

Before pairing a headset or any other Bluetooth device with your WORKABOUT PRO3,
make certain that the Bluetooth device power is enabled and that the radio is switched on; it
is enabled by default. If, for some reason, it has been disabled:
•• Tap on Start>Settings>System tab and then, tap on the Power icon to display the
Power dialog box.
•• Tap on the Built-in Devices tab, and tap in the checkbox next to Enable Bluetooth.
•• Next, tap on Start>Settings>Connections tab>Bluetooth icon.
•• Tap on the Mode tab, and check Turn on Bluetooth. Tap OK.
•• Turn your Bluetooth device on and place it within a few feet of your
WORKABOUT PRO3.
•• If needed, set your Bluetooth device to visible (discoverable) so that the hand-held can
detect it and establish a connection.

6.39.1 Paired Tab

This tab lists all paired devices and their corresponding services. The format of the name is
<Device Name>:<Service Name>. Additional information may appear in this screen such as
the Port Numbers for Serial Profiles service.

To learn how to scan for devices that will appear in this tab, review ““Device Tab”” on
page 204.

202 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Paired Tab

Note: If a service is actively paired and connected, the device and its services are displayed
in bold typeface in this list.

•• Tap and hold down the stylus on an item in the Paired tab to display an associated pop-
up menu.

This is a service-dependent menu –– that is, it varies slightly depending on the service chosen
in the Servers tab. Refer to ““Servers Tab”” on page 208 for more details.
Query Services and Remove Commands

Note: The Query Services and Remove commands are available in all service-dependent
menus, regardless of the type of service chosen.

•• Query Services displays a Services dialog box where a pairing service is chosen.
•• Remove unpairs the highlighted service and deletes the entry from the tab.
OBEX OPP (Object Exchange-Object Push Profile) Commands
The OPP defines two roles –– a Push Server and a Push Client. Push Server is the device that
provides an object exchange server. Push Client is the device that pushes and pulls objects to
and from the Push Server.
OBEX OPP contains the following unique menu option:
•• Send File displays an Open File dialog box where the file to be sent can be selected.
When the transmission begins, another dialog box tracks the progress of the file
transmission.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 203

Chapter 6: Settings
Device Tab

HSP/HFP (Headset Profile/Hands-Free Profile) Service Commands

The HSP (Headset Profile) allows users to connect their device to Bluetooth enabled head-
sets and other audio devices.
HSP/HFP services provide the following unique menu options:
•• Connect Audio establishes an audio connection to the Bluetooth headset.
•• Disconnect Audio disconnects the audio connection from the Bluetooth headset.
•• Volume Control displays a dialog box where the headset and microphone volume can be
adjusted.

6.39.2 Device Tab

This tab discovers and displays Bluetooth devices.

6.39.2.1 Discovering and Removing Devices

Scan discovers Bluetooth devices in range of the WORKABOUT PRO3 and lists them in
this tab. Any existing devices previously discovered and listed will also be displayed.
Clear removes all Bluetooth devices listed except those with currently paired and connected
services.

Note: To limit the scope of the scan to a particular type of device, refer to ““Filtering By
Class of Device (COD)”” on page 205.

204 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Device Tab

6.39.2.2 Filtering By Class of Device (COD)

This menu allows you to limit the scope of the scan to a particular type of device. If, for ex-
ample, you choose Computer from this menu, only computers within range of the
WORKABOUT PRO3 are listed in the Device tab. Choosing All lists all detected devices.

6.39.2.3 Device Pop-up Menu

The Device pop-up menu allows you to pair a device, update a device name or delete a
device from the list.
Pair begins the pairing process by inquiring the services and profiles of the discovered
device. An authentication dialog box is displayed the first time a Bluetooth device is paired.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 205

Chapter 6: Settings
Device Tab

Refresh Name repeats the device name inquiry, updating the name. This command is useful
if a device is listed without a name (unknown), or if a device name has been changed
remotely.
Delete removes this device from the list.

6.39.2.4 Pairing a Device

To pair devices:
•• Follow the manufacturer’’s instructions to place the remote device in pairing mode.
•• Choose the Devices tab and Scan for devices in your area.
•• When the scan is complete, tap on the device to which you want to pair.
•• In the pop-up Device menu, tap on Pair.
An Authentication dialog box is displayed.

•• If the remote device has authentication enabled, type the PIN in this dialog box.
•• To proceed without authentication, tap on Next.

Note: If a remote device has authentication enabled and you’’ve skipped the authentication
process, a pop-up screen will ask if you want to allow the remote device to connect to
the WORKABOUT PRO3. Tap on Yes and type the PIN. When authentication is com-
plete, tap on Done.

206 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Device Tab

After entering the device PIN, the Services dialog appears with a list of services available for
that device.

•• Click in the checkbox to the left of the service to activate it.

•• Click on Done.

Note: If you choose a service requiring additional information, a dialog box is automati-
cally displayed where further details can be completed.

The sample dialog box below is an example of a service requiring additional information ––
in this case, the Serial Port Service

This dialog box offers a number of additional options such as enabling Encryption and se-
lecting three different modes: Serial, ActiveSync and Scanner

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 207

Chapter 6: Settings
Servers Tab

•• Serial is used for simple serial port communication.

•• ActiveSync is for ActiveSync-over-Bluetooth.
•• Scanner is used to create a seamless connection between the incoming Bluetooth bar
code and the WORKABOUT PRO3.
Once you’’ve completed the information:
•• Tap on Next and then in the Services screen, click on Done.

6.39.3 Servers Tab

When a remote Bluetooth device initiates a Bluetooth connection to the WORKABOUT

PRO3, the remote device is considered the ‘‘Bluetooth master’’ and the hand-held, the ‘‘Blue-
tooth slave’’. In order for the remote device to connect to the WORKABOUT PRO3, the
WORKABOUT PRO3 must offer a service in the form of a server. The Servers tab allows
these services to be enabled and configured. There are three server services available: Serial,
Scanner and OBEX OPP.
Serial server enables the Serial Port Profile server; a Serial Port can be selected from the
drop-down menu. Keep in mind that when a port is chosen, an application must be open
(connected) to the chosen port for a remote device to be able to connect.
Scanner server enables a Serial Port Profile server and then relays it to the Scanner Service
(SCS). This is used for Bluetooth bar code scanners that operate in client mode. SCS opens
the server port and handles the scanner input.
OBEX OPP server enables the Object Push Profile server. A warm reset must be performed
on the WORKABOUT PRO3 after a change is made to this option. The OPP Server allows
other Bluetooth devices to send files to this device.

208 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Mode Tab

•• Tap on the checkbox to activate the server –– the associated port name is displayed beside
the server name.

6.39.4 Mode Tab

Turn on Bluetooth allows you to enable or disable the Bluetooth radio. Discoverable deter-
mines whether the WORKABOUT PRO3 is visible or invisible to other devices.
Device Scan Duration can be used to controls the duration in which the WORKABOUT
PRO3 scans for other devices. The higher the value assigned, the greater the scan duration.
Printer Port allows you to choose a port for the printer. Keep in mind that you need to
choose a port from the Select Port drop-down menu before you can enable Printer Port.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 209

Chapter 6: Settings
About Tab

6.39.5 About Tab

Device Name displays the broadcasted name of the WORKABOUT PRO3. The name can be
changed in the About applet –– tap on Start>Settings>System tab>About icon. Tap on the
Device ID, and change the name.
Local Address displays the MAC address (BD_Addr) of the Bluetooth chip.
HCI Version & LMP Version display the version of the chip firmware.
Component indicates the version of the Psion Teklogix Bluetooth Subsystem (the manager,
drivers, etc).
Profiles lists the supported profiles on this specific WORKABOUT PRO3.

6.39.6 The Bluetooth GPRS Phone

Once you’’ve completed the Bluetooth settings, you can go ahead and set up communication
through your Bluetooth-equipped phone.

210 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
The Bluetooth GPRS Phone

Before you begin, make certain that the Bluetooth phone is turned on, that the Bluetooth
radios in your WORKABOUT PRO3 and phone are enabled (turned on), and that the hand-
held and phone are within 10 metres of each other. Both should be discoverable.

1. Tap on Start>Settings, and then tap on the Connections tab.

2. Tap on the Connections icon. Tap on Add a new modem connection.
3. Type a name for the connection.
4. Tap on the Select a modem drop-down menu, and choose Bluetooth. Tap on Next.
5. Make certain that the phone is discoverable. Some phones also need to be pairable
in order to accept a bonding request. Refer to your phone documentation for addi-
tional information.
6. If the phone appears in the My Connections list, skip to step 13.
7. In the list, tap the phone and then tap on the Next button.
8. In the PIN screen, type a personal identification number (PIN) –– you can enter up to
16 characters.
9. Enter the same PIN on the phone.
10. If you wish, you can edit the name of the phone in the Name field.
11. Tap on the Finish button.
12. In the My Connections list, tap on the phone and then on Next.
13. Enter the dial-up phone number for this connection, and tap on Next.
14. In the User name, Password and Domain fields, enter the logon information for this
connection, and tap on Finish.
You can begin using the Bluetooth phone connection, for example, to send and receive e-
mail, browse the Internet with Internet Explorer, and so on.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 211

Chapter 6: Settings
Connection Properties

6.40 Connection Properties

This applet is used to set up serial modem connections.
•• Tap Start>Settings, and then tap on the Connections tab.

•• Tap on Start>Settings>Connections tab>Connection Properties icon.

•• Choose a connection from the drop-down menu, and tap on Edit Properties.

212 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Port Settings

6.40.1 Port Settings

Baud Rate
In the Baud rate drop-down menu, choose a new baud rate. Check your modem documen-
tation for the appropriate baud rate.
Data Bits
This parameter determines the number of bits for the data going through this port. Possible
values are: 4, 5, 6, 7, 8.
Parity
This parameter determines the type of parity checking used on the data going through the
port. The options are: none, odd, even, mark and space.
Stop Bits
This parameter specifies the number of stop bits –– 1, 1.5, 2 –– used for asynchronous
communication.
Flow Control
This parameter selects the type of flow control used in your hand-held. The WORKABOUT
PRO3 can perform Software or Hardware handshaking, or you can choose None.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 213

Chapter 6: Settings
Call Options

6.40.2 Call Options

Cancel Call If Not Connected Within

Tap in the checkbox to enable this option to make certain that the WORKABOUT PRO3
does not stay online too long while waiting to connect with a network.
Enter the number of seconds after which the call will be cancelled.
Wait For Dial Tone Before Dialing
To speed connection when using a modem, disable this option –– tap in the checkbox to the
left of this option.
Wait For Credit Card
If you are paying for calls with a credit card, enter the number of seconds you want the
WORKABOUT PRO3 to wait for a credit card prompt.
Extra Dial-String Modem Commands
Type your credit card number in this field.

6.41 Connections –– Connecting To The Internet

To activate a connection, make certain that any necessary equipment is installed in your
WORKABOUT PRO3 such as a radio.
You’’ll need the following information from your ISP to make an internet connection:
•• ISP server phone number,
•• user name, and
•• password.

214 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Modem Connection Setup

1. Tap Start>Settings, and then tap on the Connections tab.

2. Tap on the Connections icon.

Note: In the Connections window, the Tasks tab is used to create new connections and
manage existing ones. The Advanced tab allows you to choose a network. If you
need to change these settings, contact your ISP or network administrator before
making changes.

3. Under My ISP, tap on Add a new modem connection.

4. In the Select a modem drop-down menu, choose a modem connection. If you
haven’’t already created a modem connection, refer to ““Modem Connection Setup””
on page 215.
5. To connect to the Internet, launch the program you want to use. For example, launch
Internet Explorer on your WORKABOUT PRO3 to browse the Internet. Your
WORKABOUT PRO3 automatically connects.

Note: To set up a network card or wireless network connection to your ISP, add a new con-
nection under My Work Network.

6.41.1 Modem Connection Setup

Before you begin, you’’ll need the following information from your ISP or network adminis-
trator: telephone number, password, domain name, and TCP/IP settings.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 215

Chapter 6: Settings
Modem Connection Setup

If your WORKABOUT PRO3 does not have access to a mobile phone network, insert a
modem card in the unit.
1. Tap Start>Settings. Tap on the Connections tab followed by the Connections icon.
2. To create a new connection in either My ISP or My Work Network, tap on Add a
new modem connection.
3. In the Make New Connection screen, type a name for the connection.

4. In the drop-down menu under Select a modem, tap on your modem type.

Note: If your modem is not listed in the drop-down menu, choose Hayes Compatible
on COM1.

5. Tap on the Next button.

216 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Modem Connection Setup

6. In the next screen, enter the phone number exactly as you want it dialed. If, for
example, you need to dial 9 for an outside line, enter 9 at the beginning of the
phone number.
7. Tap on the Next button.

8. Type the User Name, Password and Domain Name as provided by your ISP or
network administrator.

Note: Generally, you will not need to change any of the Advanced settings. For information
about the Advanced settings, refer to ““Advanced Modem Settings”” on page 218.
Changes to Advanced settings are only required in the following instances:
To change the baud rate settings, dialing string commands or credit card options.
To change port settings.
To enter TCP/IP settings because the server to which you are connecting does not
dynamically assign addresses.

9. Tap on the Finish button.

If you need to edit the Advanced settings, refer to ““Advanced Modem Settings”” in the
next section.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 217

Chapter 6: Settings
Modem Connection Setup

6.41.1.1 Advanced Modem Settings

TCP/IP Settings Tab
If your server assigns IP addresses dynamically, you will not need to change these settings.
If you need to make changes, contact your ISP or network administrator for addresses.

Server Settings Tab

If your server assigns IP addresses dynamically, you will not need to change these settings.

Servers requiring assigned IP addresses may also need a way to map computer names to IP
addresses. The WORKABOUT PRO3 supports a variety of name resolution options: DNS,
Alt DNS, WINS and Alt WINS.
Your ISP or network administrator can determine which name resolution you need, and can
also provide the server address. In addition, you will want to ask if alternate addresses are
available. An alternate address may allow you to connect when the primary server is
not available.

218 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Wireless Manager Icon

6.42 Wireless Manager Icon

While you can access network card settings through the Wi-Fi icon, and you can access Blu-
etooth settings through the Bluetooth icon, and for units that support it, GSM/GPRS
connections, the Wireless Manager icon acts as a connection manager, providing access to
all these types of network connections.

Important: The ‘‘Wireless Manager’’ option provides detailed Help files to assist you in
setting up your hand-held. Help is available from the Connections tab –– not
from within the Wireless Manager dialog box.
To access Wireless Manager help files, tap on Start>Settings>Connections
tab. Tap on Start>Settings>Help.

•• Tap on Start>Settings>Connections>Wireless Power icon.

6.42.1 Flight Mode –– Disabling Wireless Components

To disable all wireless components when, for example, you are taking your hand-held onto a
plane where wireless connections need to be shut down:
•• Tap on the Disable All button.
To enable wireless components:
•• Tap on Enable All.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 219

Chapter 6: Settings
Setting Up A Network Card

To disable a particular radio connection rather than all connections:

•• Highlight an Available (enabled) radio listed in this dialog box, and then tap on the
Disable button.

6.42.2 Setting Up A Network Card

Network (802.11) cards are used to connect to a network so that you can browse the Internet,
download e-mail and so on. You can connect to an existing network or you can set up a new
connection on your WORKABOUT PRO3.

Important: The WORKABOUT PRO3 is equipped with context sensitive Help Files. If
you find that you’’re unsure how to proceed with a network connection at
any point during setup, tap on the question mark icon in the navigation bar
at the top of the screen.

6.42.3 Network Adaptor Cards

Important: For RA2041 (Summit) CF card adaptor setup details, refer to ““Setting Up a
RA2041 Radio––Summit Client Utility”” on page 16.

When the network card is inserted in your unit for the first time, the Network Settings screen
is displayed automatically so that you can configure the card. If it does not appear, or if you
want to change settings:
•• Tap on Start>Settings>Connections.

220 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Network Adaptor Cards

•• Tap on the Network Cards icon.

•• If you need to specify server information, double-tap on the appropriate adaptor, and
then tap on the IP Address and/or Name Servers tab.

Note: Because most networks use DHCP, you should not need to change these settings
unless instructed to do so by your network administrator.

•• If necessary, use a network cable to connect the network card to your network. Refer to
the documentation shipped with your network card for details.
•• To activate the connection, launch the desired program (e.g., Internet Explorer). The
WORKABOUT PRO3 will connect automatically.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 221

Chapter 6: Settings
Changing Network Card Settings

6.42.4 Changing Network Card Settings

•• If you use your network card in two locations like work and home, you’’ll need to
change the network to which the network card connects.
•• Tap on Start>Settings>Connections>Network Cards.
•• In the Configure Network Adapters dialog box, tap on the drop-down menu below My
network card connects to, choose either The Internet or Work.

6.42.5 VPN Connection Setup

A VPN connection provides a secure connection to servers through the Internet.
Before you begin, you need the following information from your network administrator:
password, domain name, TCP/IP settings and a host name or IP address of the VPN server.
•• Tap on Start>Settings. Tap on the Connections tab followed by the Connections icon.
•• Under My Work Network, tap on Add a new VPN server connection.
•• In the Name field, type a name for this connection.
•• In Host name/IP, type the VPN server name or IP address.
•• Tap on the VPN type radio button next to the type of authentication for your WORKA-
BOUT PRO3: IPSec/L2TP or PPTP. Your network administrator will let you know
which option applies to your unit.
•• Tap on Next.
•• Choose the type of authentication in this screen. If you choose A pre-shared key, type
the key provided by your network administrator.
•• Tap on Next.
•• Type your user name, password and domain name. If a domain name was not pro-
vided to you, try the connection without entering a domain name.

Note: Normally, you will not need to change any advanced settings. You will need to make
changes only under only the following circumstances:
The server to which you are connecting does not dynamically assign addresses, and
TCP/IP settings need to be entered.
Server DNS or WINS settings need to be changed.

If you need to edit the Advanced settings, refer to ““Advanced Modem Settings”” on page 218
for details about this tab.
•• Tap on Finish.

222 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Managing An Existing Connection

•• Launch a program like Internet Explorer to activate the connection. The VPN connec-
tion will start automatically.

6.42.6 Managing An Existing Connection

Once you’’ve defined a connection, a new option appears in the first Connections screen––
Manage existing connections.

6.42.6.1 Editing A Connection

•• Tap on Settings>Connections tab. Tap on the Connections icon.
•• Tap on Manage existing connections.

Tap here

•• To launch a connection from this screen, press and hold the stylus on the connection you
want to activate. Choose Connect from the pop-up menu.
•• To delete a connection, press and hold the stylus on the connection you want to delete.
Choose Delete from the pop-up menu.

Note: You can also create a new connection by tapping on the New button. To make
changes to the settings for this connection, tap on Edit.

6.42.6.2 Changing A Connection Setting Name

Your WORKABOUT PRO3 has two sets of connection settings: My ISP and My Work Net-
work. If you want to change one or both of these options to something more familiar to you,
follow these steps.
•• Tap on Start>Settings. Tap on the Connections tab followed by the Connections icon.
•• Under My Work Network or My ISP, tap on Manage existing connections.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 223

Chapter 6: Settings
Selecting A Network

•• Tap on the General tab.

•• Type the name you prefer in the field below Enter a name for these settings.
•• Tap on OK.

6.42.7 Selecting A Network

Important: Normally, you will not need to change these settings. Contact your ISP or
network administrator before making any changes.

Private networks are used for work-related activities. Internet networks are used for home
connection to your ISP. The My Work Network settings are used for private network connec-
tions (corporate networks), while My ISP settings are used for Internet network connections.
When you use programs such as Internet Explorer, your WORKABOUT PRO3 automati-
cally connects using private network settings under My Work Network or Internet settings
under My ISP, depending on specifications. You can determine how your WORKABOUT
PRO3 connects.
•• Tap Start>Settings. Tap on the Connections tab followed by the Connections icon.

224 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Proxy Server Setup

•• Tap on the Advanced tab.

•• Tap on Select Networks.

•• In the appropriate lists, choose My ISP or My Work Network.

6.42.8 Proxy Server Setup

Note: If you are connected to your ISP or private network during synchronization, the
WORKABOUT PRO3 will download the appropriate settings during synchronization
from your PC. If these settings are not on your PC, or if they need to be changed,
you’’ll need to set up the proxy server connection manually.

To set up the proxy server connection manually, you’’ll need the following information:
proxy server name, server type, port, type of Socks protocol used and the user name and
password.
•• Tap Start>Settings. Tap on the Connections tab followed by the Connections icon.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 225

Chapter 6: Settings
Proxy Server Setup

•• Under My Work Network, tap on Set up my proxy server.

•• Add a checkmark next to This network connects to the Internet and This network
uses a proxy server to connect to the Internet.
•• In the Proxy server field, type the proxy server name.
•• Tap on OK to save your changes.

Note: If you need to change advanced settings such as a port number or proxy server type,
you’’ll need to tap on the Advanced button rather than tapping on OK. Advanced set-
tings are described in ““Changing Advanced Proxy Server Settings”” on page 226.

6.42.8.1 Changing Advanced Proxy Server Settings

•• To change advanced settings such as the port number or proxy server type, tap on the
Advanced button.

•• Tap on the proxy type you want to change. For the appropriate server type, type the
proxy server name and port.
•• Tap on OK.

226 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Wireless Statistics

6.43 Wireless Statistics

•• Tap on Start>Settings>Connections>Wireless Statistics icon to display the communi-

cation statistics of your wireless connection along with the radio card name, MAC
address, driver version and NDIS Compliance information.
•• Tap on the Zero button to reset the statistics.

6.44 Wireless WAN (Windows Mobile 6.1 Classic Only)

This applet is visible for WORKABOUT PRO3s running Windows Mobile 6.1 Classic. A
hand-held equipped with a GSM/GPRS, CDMA/1xRTT or UMTS radio has wide area net-
working data transfer capabilities.

6.44.1 Softkey Bar Icons

Wireless WAN icons in the softkey bar indicate the status of your wide area network con-
nection. Note that these icons are only visible when a GSM/GPRS, CDMA/1xRTT or
UMTS radio is installed in the unit, and the interface is enabled.
The letter in the signal strength icon (G for GSM/GPRS, U for UMTS and X for
CDMA/1xRTT) indicates that a packet data service is available and initialized. Keep in
mind that the signal strength icon is displayed without a letter if packet data service is not
available or if it is available but not yet initialized.
User interaction is required (e.g. the user is required to enter a PIN).

A non-recoverable (fatal) error has occurred.

GSM/GPRS Status Indicators

Signal strength is between 1% and 20%.

Signal strength is between 21% and 40%.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 227

Chapter 6: Settings
Establishing A Connection

Signal strength is between 41% and 60%.

Signal strength is between 61% and 80%.

Signal strength is between 81% and 100%.

A GPRS packet data connection is active.

CDMA/1xRTT

Signal strength is between 1% and 20%.

Signal strength is between 21% and 40%.

Signal strength is between 41% and 60%.

Signal strength is between 61% and 80%.

Signal strength is between 81% and 100%.

A CDMA/1xRTT packet data connection is active.

6.44.2 Establishing A Connection

•• Tap on Start>Settings. Tap on the System tab followed by the Wireless WAN icon.

Note: If you are prompted to enter a PIN, refer to ““Entering A PIN”” on page 230 for
details.

228 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Disconnecting From A Network

The Status field indicates when the unit is ready to connect––the Connect Data button is
enabled.
•• Tap on the Connect Data button.
The progress of the connection is tracked in the Status field.
•• PPP link to modem active
•• Authenticating user
•• User authenticated
•• Connected

Note: Keep in mind that these states may be displayed fairly quickly if the progress of the
connection is rapid.

When the connection state reaches PPP link to modem active, the softkey bar icon changes
to indicate an active connection. The Connect Data button changes, displaying Disconnect.

6.44.3 Disconnecting From A Network

To disconnect from the network:
•• Tap on the Disconnect button, and then on OK.
When the WORKABOUT PRO3 network connection is severed, the Status field displays
Ready to Connect.
A unit equipped with a GSM/GPRS expansion board displays the signal strength in the main
Wireless WAN screen, even while a connection is active. Units equipped with certain other
modems (e.g. Sierra Wireless UMTS and CDMA modems, Novatel UMTS modems) do not
display the signal strength while a connection is active.The Rx bytes and Tx bytes fields esti-
mate the amount of data transmitted and received, respectively.

6.44.3.1 Shutting Down The Wireless WAN User Interface

While it is not usual to shut down the GSM/GPRS user interface, you can accomplish this
by tapping on the File menu and choosing the Exit command in the Wireless WAN screen
screen.

Note: Once you’’ve shut down the user interface, you can only enable the radio by tapping
on the Wireless WAN icon to display the dialog box.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 229

Chapter 6: Settings
Advanced Information

6.44.4 Advanced Information

In most cases, when a GSM/GPRS radio and SIM are installed in your hand-held, setup is
automatic. Follow the steps outlined under the heading ““Establishing A Connection”” on
page 228 to make a connection. The information in this section is for advanced setup
purposes.

6.44.4.1 Entering A PIN

If a PIN is required, a PIN entry dialog box is displayed.
•• Type your PIN, and press [ENTER].

Note: If you exceed the number of allowable attempts, a PUK entry window is brought to
the foreground. You’’ll need to enter a new PIN number.

Once the correct PIN or PUK is entered or if none was required, the modem is instructed to
perform a GSM network registration followed by a GPRS attach. The main Wireless WAN
dialog box reflects the progress of the initialization.
•• Searching for modem
•• Initializing modem
•• SIM is ready
•• Searching for network
•• Registered on network
•• Searching for packet data
•• Ready to connect
If the modem loses the connection to the GSM network, the following states are repeated:
Searching for network, Registered on network, Searching for packet data and Ready to
connect.

6.44.4.2 Error States

The following temporary error states––states that may disappear without interaction–– may be
displayed:
•• Emergency calls only
The modem has found a network but is not allowed to register (e.g. no roaming agreement
between networks). The modem keeps searching for another network.
•• No network found
A network is not currently available. The modem continues searching for a network.

230 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Tools Menu

•• Packet data not available

The current network does not support packet data.
•• Packet data not allowed
The modem is not allowed to use packet data on the current network (e.g. no packet data
roaming agreement between network; a roaming agreement for voice may still be in place).
It is also possible that you do not have a subscription for packet data at all.
The remaining error states are permanent:
•• SIM is missing
The SIM card is missing. After the SIM has been inserted a reset may be required.
•• SIM failure
The SIM card is permanently disabled (e.g. because the wrong PUK has been entered too
many times). A new SIM is needed.
•• Modem failure
The modem did not respond to commands as expected. If a reset does not clear this condi-
tion, the modem may need to be replaced.
•• NDIS error
An internal software error has occurred. If a reset does not clear this condition, Psion Tek-
logix technical support may need to investigate further.

6.44.5 Tools Menu

The Tools menu in the main Wireless WAN dialog box offers some additional advanced
setup features.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 231

Chapter 6: Settings
Tools Menu

6.44.5.1 Data Connection Configuration

Enable Automatic Connect

If the Enable automatic connect checkbox is checked (unchecked by default), the Wireless
WAN user interface will attempt to establish a packet data connection whenever packet data
is available (e.g. after resume from suspend without further user interaction).
To activate the automatic connection mode:
•• Tap on the OK button.
While automatic connection mode is enabled, the Connect Data button in the main Wireless
LAN dialog box changes to Disable Auto.
To close the currently active connection (if any) and disable the automatic connection mode:
•• Tap on Disable Auto.

Important: Automatic connection mode should not be used if applications other than
the Wireless WAN user interface (e.g. Connection Manager) are expected
to open and close connections.
If the automatic connection mode is enabled and another application closes
the packet data connection, the WWAN user interface will immediately try
to re-establish the connection.

Use Virtual Serial Port

If Use virtual serial port is enabled, packet data connections are established through the
virtual serial port of the WWAN driver rather than through the WWAN driver directly.
This checkbox should only be checked if certain third-party VPN (Virtual Private Network)

232 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Tools Menu

clients are used that do not work correctly otherwise. The default setting is disabled
(unchecked).

Note: The connection setup takes longer through the virtual serial port.

Enable Automatic Configuration

In most cases, the data connection is configured automatically and no user interaction is re-
quired. This is true even if multiple SIM cards from different operators are used with the
same device. The connection parameters are adjusted automatically when a new SIM card is
detected (this may require a reset). The connection parameters are retrieved from a database.
Manual configuration should be necessary only if:
•• One or more parameters in the database are incorrect or a new operator is not yet in the
database. (The database should be corrected for subsequent software releases.)
•• An operator has assigned individual packet data user names and passwords.
•• A very large site has their own APN. Such connections always have to be
configured manually.
•• A customer has subscribed for a static IP address. By definition this must be
configured manually.

Important: For CDMA/1xRTT, automatic configuration is not available –– connections

must be configured manually. Under APN, the packet service access
number must be entered (typically ““#777””).

In the following section, all the parameters that need to be configured for a connection (such
as APN, user name, password, DNS server addresses etc.) are referred to as a profile. Every
profile is identified by an arbitrary, unique name. The profile named Default is special in
that it is always present and can neither be edited nor deleted. (A sample dialog box is pre-
sented on the page following.) The Default profile uses parameters from a built-in database.
The home network (the network that issued the SIM) is used for the database look-up. While
there can be many configured profiles, only one profile can be active at any time.
If connection profiles are configured manually then the Enable automatic configuration:
checkbox should normally be unchecked.
In one particular use case, manually configured profiles may be combined with automatic
configuration. If multiple SIM cards are used with the same device, each SIM card being
from a different operator and some or all of them requiring a manually set up profile, auto-
matic configuration may be used to automatically pick the correct manually configured

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 233

Chapter 6: Settings
Tools Menu

profile for each SIM card. For this to work each profile has to be configured while the corre-
sponding SIM card is inserted in the device and initialized (i.e. the status is at least SIM
is ready).
The Select profile drop-down list in the data configuration profile selects which profile a
subsequent action applies to. A profile named Default is always present and contains the
current parameters from the database. The following actions are available:
Show
The parameters for the selected profile are displayed when you tap on this button. For the
Default profile, the publicly known password is shown –– otherwise, the password is hidden.
Edit
The parameters of the selected profile can be edited when you choose the Edit button. Keep
in mind that you cannot edit the Default profile.
Delete
The selected profile is deleted. You cannot delete the Default profile.
Activate
When this button is chosen, the selected profile is made the active profile. Activation is pos-
sible only if the Enable automatic configuration: checkbox is unchecked.
New
Tapping on the New button allows you to create a new profile.

The name of the newly created profile must be different from all existing profiles. Also, the
name cannot be Default. When the New Data Profile dialog box is opened, a proposal for a
unique name is filled in the corresponding entry field. If a manually configured profile has a

234 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Tools Menu

secret password and unauthorized access to the device is a concern even after the SIM PIN
has been entered, the password should not be entered in the New Data Profile dialog box
and the Prompt user for password checkbox should be checked instead. In this case, you will
be prompted for the password each time a connection is initiated (the Connect Data button
in the main Wireless WAN dialog box is selected).
Reset
The Reset button in the New Profile and Edit Profile dialog boxes resets all entry fields to
the values they had when the dialog box was opened.
Advanced IP

The Advanced IP button in the Show Profile and Edit Profile dialog boxes opens another
dialog box that allows you to configure a static IP address as well as the IP addresses for the
primary and secondary DNS and WINS resolvers.

6.44.5.2 Security Configuration

The Security Configuration dialog box is called up through the Tools menu.

Note: Security configuration is not available with CDMA modems.

The Security Configuration dialog box allows you to enable, disable and change the PIN.
You will need the current PIN to make any of these changes. The PIN must be enabled in
order to be changed. (If the PIN is disabled, the New PIN entry field is greyed out.)

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 235

Chapter 6: Settings
Tools Menu

Note: Keep in mind that some network operators do not allow the SIM PIN to be disabled.
A new PIN must consist of 4 to 8 numeric digits.

The Require PIN on resume checkbox is independent of the aforementioned settings. By de-
fault, this checkbox is unchecked. While the checkbox remains unchecked, any PIN entered
on startup or through the Security Configuration dialog box and submitted successfully to
the modem is stored in memory for as long as the device is not rebooted. This stored PIN is
then used without further user interaction whenever the modem requires a PIN (such as
resume after suspend or modem removal). The stored PIN is also automatically entered in
the Current PIN text box whenever the Security Configuration dialog box is called up.
If unauthorized access to the device is a concern, the Require PIN on resume checkbox
should be checked. In this case, you will be prompted whenever a PIN is required and the
PIN is not stored.

6.44.5.3 Network Configuration

Note: Network configuration is not available with CDMA modems.

In the main Wireless WAN screen:

•• Tap on the Tools menu, and choose Network.
By default the GSM radio modem automatically chooses from the available and allowed
networks (allowed networks are the home network and all other networks with which the
home network has a roaming agreement). You may find there are some situations in which
you want to override this default behaviour. For example, you may want to disable roaming
if you find yourself in a border area where the home network is not available but a foreign
roaming partner is available. Abroad, you may find that an available network does not have
packet data roaming agreements. In this case, you’’ll need to manually select the network
which you know to support packet data roaming.
Automatic network selection is enabled or disabled by checking or unchecking Enable auto-
matic network select in the Network dialog box. When automatic network selection is
disabled, you must select a network manually.
Available networks can also be viewed without changing any settings. Scanning for avail-
able networks is a lengthy operation –– a progress bar is shown while the scan is active. For
every network that is found, the network name, country, status and numeric network
identifier (MCC/MNC, Mobile Country Code followed by the Mobile Network Code)
is displayed.

236 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Tools Menu

Note: Your home network operator will need to let you know which other networks have
roaming agreements. Even when a network is listed with an ‘‘Available’’ status, it does
not necessarily follow that it can be used or that the roaming agreement covers
packet data.
A status of ‘‘Forbidden’’ indicates that the network cannot be used. If you choose a
network that is not covered by a roaming agreement, the status in the main WWAN
dialog box changes to ‘‘Emergency calls only’’, ‘‘No network found’’, ‘‘GPRS not avail-
able’’ or ‘‘GPRS not allowed’’.

6.44.5.4 Driver Mode Configuration

By default, the Wireless WAN driver is enabled (the Enable driver checkbox is checked).
The driver must be disabled in order to access the modem directly (e.g. dial-up data, fax, or
in order to manually submit AT commands to the modem for development, testing, approv-
als, etc.). In most cases, the Virtual WWAN serial port can be used and it is not necessary to
disable the WWAN driver. If the Enable driver checkbox is not checked, the driver is shut
down as soon as the OK button in the Driver Mode dialog box tapped.
If, on the other hand, the Wireless WAN driver is not running and the Enable driver check-
box is checked, the Wireless WAN driver is started as soon the Driver Mode dialog box is
closed using the OK button.

Note: When the driver is not running, no network status or signal strength can be displayed.

Since all currently supported modems are automatically detected, the Enable automatic port
detection checkbox should always be checked. If this checkbox is not checked, a serial port

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 237

Chapter 6: Settings
Tools Menu

can be selected manually. This experimental feature allows the driver to be used with an in-
ternal GSM modem that was not recognized by the automatic detection or an external GSM
modem connected to a serial port of the computer through USB or through Bluetooth. An
external modem connected to a serial port must support 115.2kbit/s, 8bit, no parity and hard-
ware flow control.

6.44.5.5 Modem Information

The fields in this dialog box cannot be edited –– they only display information about the
WORKABOUT PRO3 modem. If the network operator has not programmed a user’’s phone
number into the SIM, the Phone field remains empty. The modem serial number is called
IMEI for GSM modems and ESN for CDMA modems.
The SIM ID is sometimes referred to as the ICC ID (International Charge Card Identifier).
Not all modems support the retrieval of the SIM ID. In particular, the Novatel Merlin UMTS
modems and the Option Globetrotter modems do not support SIM ID retrieval.
If the main menu shows an error status, at least partial modem information may be available.
Modem Power Modes
The power mode of the modem is controlled through the Power icon rather than through the
Wireless WAN user interface.
To adjust PC Card and CF card modems settings:
•• Tap on Start>Settings, and then tap on the System tab followed by the Power icon.
•• Tap on the Built-in Devices tab.
If the checkbox for a modem is unchecked, power is not applied to the modem and a driver
is not loaded (neither the serial port driver nor the Wireless WAN driver). If the checkbox is
checked, power is applied to the modem and the drivers are loaded when the hand-held is
turned on. Power is removed from the modem when the WORKABOUT PRO3 enters
suspend mode.
To enable a modem module that is built into the unit:
•• Tap on Start>Settings, and then tap on the System tab followed by the Power icon.
For a modem module that is built into the WORKABOUT PRO3, the settings can be found
under the Built-in Devices tab. In this case, one of the following power modes can
be selected:
•• Disabled –– No power is applied to the modem and no driver is loaded.
•• Enabled –– Off in Suspend

238 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
Tools Menu

Power is applied to the modem and the drivers are loaded when the hand-held is turned on.
Power is removed from the modem when the terminal enters suspend mode.
•• Enabled –– Always On
When the WORKABOUT PRO3 enters suspend mode, the modem remains powered
indefinitely.
•• Enabled –– Keep on for 5 min
•• Enabled –– Keep on for 15 min
•• Enabled –– Keep on for 30 min
•• Enabled –– Keep on for 1 hour
•• Enabled –– Keep on for 2 hours
When the hand-held enters suspend mode, the modem remains powered. If the WORK-
ABOUT PRO3 is not turned on again during the configured time, the unit briefly wakes up
from suspend mode, shuts down the modem, and enters suspend mode again. The default
mode is Enabled - Keep on for 1 hour.
At the cost of a slightly increased power consumption in suspend mode, the modes where
the modem remains powered during suspend mode have several advantages. When the
hand-held wakes from suspend mode, the modem is ready immediately; modem or network
initialization is not required. A packet data session can thus remain active during suspend
mode. In these modes, the modem is also able to wake up the hand-held if the network status
changes, or there is a new incoming SMS.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 239

Chapter 6: Settings
SMS Menu

6.44.6 SMS Menu

SMS functions are accessed through the SMS menu. For modems that support a SIM card,
the SIM initialization typically takes longer than the network initialization, resulting in a no-
ticeable delay before the SMS functions become available.

6.44.6.1 New SMS

Tapping on New opens a dialog box for sending a new SMS message. The recipient's phone
number (to be entered in the To field) can consist of the digits 0 through 9, as well as the *
and # characters, optionally preceded by one + character, indicating an international number
(i.e. the country code follows immediately after the + character).
By checking the Store message in Outbox field, a new message can be stored in the Outbox
before being sent. If no storage space is available or the modem does not support the storage
of outgoing messages, this checkbox is disabled.

240 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
SMS Menu

6.44.6.2 Inbox

Tapping on Inbox opens the list of received messages. Reading 50 messages, for example,
from the SIM can take about 30 seconds. By default the list of messages is sorted with the
most recently received message first. The list can be sorted by any other column by clicking
on the corresponding column heading.
Clicking the same column heading twice reverses the sort order. Pressing any letter or digit
moves the highlight to the next message whose address begins with that letter or number.

Note: The date and time formats can be changed through the Regional Settings in the Con-
trol Panel. For a new date or time format to take effect, the Inbox has to be closed
and re-opened.

The Open button opens the selected message in a new window such that the entire message
can be read including the original formatting (line breaks are replaced by spaces in the Inbox
message list). Pressing the Reply button opens the new message dialog as described above,
except the destination phone number is already filled in. Pressing the Delete button erases
the message.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 241

Chapter 6: Settings
SMS Menu

6.44.6.3 Outbox

Tapping on Outbox opens a list of sent messages. Otherwise the Outbox behaves exactly as
the Inbox described above. The date and time when a message was sent is not available for
GSM modems.

6.44.6.4 SMS Configuration

Tapping on SMS Configuration opens the SMS configuration dialog. The SMS Centre
Address follows the same rules as the recipient's phone number in the New message dialog.
The Message Validity Period parameter is sent to the SMS Centre with each message sent
subsequently and instructs the SMS Centre on how long it should attempt to deliver the
message to the recipient (the SMS Centre may impose an upper limit on the validity period
regardless of the setting).

242 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 6: Settings
SMS Menu

Note: Only certain discrete validity period values can be sent and thus, the validity period
is rounded to the nearest allowed value. The next time the SMS configuration dialog
is opened, the rounded value is shown.

The user interface tries to keep the SMS storage location available for a new incoming
message if the Delete oldest message when full checkbox is checked. In this case, when a
new message arrives and the SMS storage becomes full, the oldest received message is de-
leted. If any string is entered as the Message Suppression Prefix, messages beginning with
that string will not be shown in either the Inbox or Outbox. In this way, messages intended
for another application running on the same device can be hidden.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 243

PERIPHERAL DEVICES & ACCESSORIES 7
7.1 Carrying Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .249
7.2 Attaching The Hand Strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .250
7.3 Attaching The Pistol Grip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .251
7.4 The Trigger Back Plate Kit With Flush Mount Pistol Grip . . . . . . . . . . . . . .253
7.5 Protective Carrying Case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .257
7.6 Soft Shell Holster. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .257
7.7 The Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .259
7.7.1 Secure Battery Cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . .259
7.8 Adaptor Cable Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .261
7.9 Chargers And Docking Stations . . . . . . . . . . . . . . . . . . . . . . . . . . . .261
7.9.1 Installation––Chargers And Docking Stations . . . . . . . . . . . . . . . .261
7.9.2 Power Consumption Considerations . . . . . . . . . . . . . . . . . . . . .262
7.9.3 Operator Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .262
7.9.4 Important Charger Safety Instructions . . . . . . . . . . . . . . . . . . . .262
7.10 Desktop Docking Station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .263
7.10.1 Charging A Battery Installed In The WORKABOUT PRO3 . . . . . . . .265
7.10.2 Charging A Spare Battery. . . . . . . . . . . . . . . . . . . . . . . . . .265
7.10.3 Battery Charge Duration . . . . . . . . . . . . . . . . . . . . . . . . . .266
7.10.4 Charger LED Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . .266
7.11 Troubleshooting The Charging Operation Of The Dock . . . . . . . . . . . . . . .266
7.12 Linking A WORKABOUT PRO3 To A PC . . . . . . . . . . . . . . . . . . . . .266
7.13 Linking A WORKABOUT PRO3 To An Ethernet Network . . . . . . . . . . . . .267
7.13.1 Network Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .267
7.14 Troubleshooting The Docking Station Operations . . . . . . . . . . . . . . . . . .268
7.15 AC Wall Adaptor–– Model #PS1050-G1 . . . . . . . . . . . . . . . . . . . . . . .268
7.16 Automotive Adaptor––Model #WA3113-G2 . . . . . . . . . . . . . . . . . . . . .269
7.17 Single Battery Charger––Model #WA3001-G1 . . . . . . . . . . . . . . . . . . . .269

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 245

 7.17.1 Inserting A Battery In The Single Battery Charger . . . . . . . . . . . . 270
7.17.2 Battery Charge Duration . . . . . . . . . . . . . . . . . . . . . . . . . . 270
7.17.3 Charge Indicators––Single Battery Charge LED . . . . . . . . . . . . . . 270
7.18 Quad Battery Charger––Model #WA3004-G1 . . . . . . . . . . . . . . . . . . . . 271
7.19 Charging Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271
7.20 Battery Charge Duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271
7.21 Charge Indicators––The LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271
7.22 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 272
7.22.1 Excessive Charge Duration . . . . . . . . . . . . . . . . . . . . . . . . 272
7.22.2 Indicator Flashing Red . . . . . . . . . . . . . . . . . . . . . . . . . . . 272
7.22.3 Power LED Does Not Light Up . . . . . . . . . . . . . . . . . . . . . . 272
7.22.4 Indicator Does Not Light When Battery Installed . . . . . . . . . . . . . 272
7.23 Quad Docking Station––WA4204-G2 & WA4304-G2 . . . . . . . . . . . . . . . . 273
7.23.1 Quad Docking Station Setup. . . . . . . . . . . . . . . . . . . . . . . . 273
7.23.2 Quad Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 274
7.23.3 Inserting A WORKABOUT In The Quad Docking Station . . . . . . . . 274
7.23.4 Network Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 274
7.23.4.1 Network Addressing . . . . . . . . . . . . . . . . . . . . . . . 274
7.23.5 Battery Charging––LED Behaviour. . . . . . . . . . . . . . . . . . . . . 275
7.23.6 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275
7.23.6.1 Network Link Unsuccessful . . . . . . . . . . . . . . . . . . . 275
7.23.6.2 Hand-Held LED Does Not Light When Docked . . . . . . . . . 275
7.24 The Vehicle Cradle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276
7.24.1 Vehicle Cradle Mounting Recommendations . . . . . . . . . . . . . . . 276
7.25 Mounting Template . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
7.26 Wiring Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
7.27 Using The Vehicle Cradle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
7.28 Maintaining The Vehicle Cradle . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
7.29 Powered Cradle Installation In High Voltage Vehicles . . . . . . . . . . . . . . . 278
7.30 Powered Vehicle Cradle Installation . . . . . . . . . . . . . . . . . . . . . . . . . 278
7.30.1 Wiring Vehicle Power To The Cradle . . . . . . . . . . . . . . . . . . . 278
7.31 The Port Replicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 279
7.32 Scanners And Imagers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280

246 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 7.32.1 Scanning Techniques . . . . . . . . . . . . . . . . . . . . . . . . . . . .280
7.32.2 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .281
7.32.3 Operating One Dimensional (1D) Laser Scanners . . . . . . . . . . . . .281
7.32.4 Operating Two Dimensional (2D) Imagers . . . . . . . . . . . . . . . . .282
7.33 Bluetooth Peripherals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .283

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 247

 Chapter 7: Peripheral Devices & Accessories
Carrying Accessories

7.1 Carrying Accessories

There are a variety of carrying accessories to help the operator work safely and comfortably
with the WORKABOUT PRO3.
Carrying Accessory Model Number
Hand Strap WA6025 for WORKABOUT PRO3 C
WA6125 for WORKABOUT PRO3 S
Pistol Grip WA6101-G1 –– for use with all POD scanners/imagers
including WA9000-G1, WA9005-G1 and WA9003-G1

Slim Pod Pistol Grip WA6102-G1 –– for use with WA9212-G1 and WA9008
Slim Pod imagers.
Trigger Back Plate/Flush Mount WA9300 is a kit that includes a special trigger back plate
Scanner Kit (includes Trigger Back (PN 1052211) and the Flush Mount Pistol Grip (WA6103).
Plate and Flush Mount Pistol Grip)
The Flush Mount Pistol Grip (WA6103) supports the
following scanner & imagers:
- WA9009 auto-ranging laser scanner (includes a trigger
back plate specifically designed for this particular imager ––
it must be installed before attaching the Flush Mount
Pistol Grip)
- WA9113-G1, WA9103-G1, WA9112-G1 and WA9102-
G1 imagers (requires that you install the trigger back plate
–– PN 1052211–– included in the kit WA9300 before attach-
ing the Flush Mount Pistol Grip)
Protective Carrying Case for WA6090-G2 (with a belt clip –– works with scanners)
WORKABOUT PRO C 3 WA6094-G2 with GSM or 802.11b/g end cap
WA6095-G2 with 1D Scan or 1D Imager end cap
(Model Number varies depending on
WA6096-G2 with 2D scan or 1D imager end cap
the type end-cap installed on the
WA6097-G2 with universal end cap (case’’s top open)
hand-held)
Protective Carrying Case for WA6190-G2 (with a belt clip –– works with scanners)
WORKABOUT PRO3 S WA6194-G2 with GSM or b/g end cap
WA6195-G2 with 1D Scan or 1D Imager end cap
(Model Number varies depending on
WA6196-G2 with 2D scan or 1D imager end cap
the type end-cap installed on the
WA6197-G2 with universal end cap (case’’s top open)
hand-held)

Soft Shell Holster WA6050

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 249

Chapter 7: Peripheral Devices & Accessories
Attaching The Hand Strap

Important: Do not use adhesives such as Loctite to secure screws on carrying accesso-
ries. These chemicals may damage the plastic casing.

7.2 Attaching The Hand Strap

The hand strap can be attached to the back of the WORKABOUT PRO3 to provide a secure
means for operators to carry the hand-held.
The hand strap is attached to the back of unit using two Phillips head screws provided with
this accessory.
•• Use a Phillips screwdriver to attach the strap to the two threaded inserts on the back of
the WORKABOUT PRO3, near the top of the unit.

250 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 7: Peripheral Devices & Accessories
Attaching The Pistol Grip

•• Stretch the hand strap toward the base of the WORKABOUT PRO3, and hook the
bottom of the strap into the slot near the base of the battery pack. A tethered stylus and
optional external stylus tube can be attached to the hand strap as illustrated below

Tethered Stylus

Stylus Tube

7.3 Attaching The Pistol Grip

There are a number of pistol grips available to you depending on the type of scanner/imager
installed in your hand-held. Refer to the table in Section 7.1 on page 249 for a list of pistol
grip model numbers and the scanners/imagers with which they are compatible.

Note: The few steps required to attach the pistol grip to the WORKABOUT PRO3 are com-
mon to all types of pistol grips. However, if you plan to use the Flush Mount Pistol
Grip (WA6103), you’’ll need to install a special trigger back plate before following
these steps to attach the pistol grip. Refer to ““The Trigger Back Plate Kit With Flush
Mount Pistol Grip”” on page 245 for details.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 251

Chapter 7: Peripheral Devices & Accessories
Attaching The Pistol Grip

The pistol grip is attached to the four threaded inserts on the back of the WORKABOUT
PRO3. Four Phillips head screws are provided with this accessory.

Note: Prior to installation, make sure the trigger mechanism is securely snapped into the
pistol grip body and that the trigger operates properly.

•• Position the pistol grip so that it fits snugly over the back of the unit and the holes in the
pistol grip are aligned with the threaded inserts on the back of the WORKABOUT
PRO3.
•• Tighten the screws to a torque of 3 lbs-in (3kgf-cm) to secure the pistol grip in place.
•• Insert the stylus in the base of the pistol grip.

252 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 7: Peripheral Devices & Accessories
The Trigger Back Plate Kit With Flush Mount Pistol Grip

7.4 The Trigger Back Plate Kit With Flush Mount Pistol Grip
The Trigger Back Plate kit, model number WA9300, provides a special back plate that incor-
porates a scanner interface board and a switch along with a Flush Mount Pistol Grip, model
number WA6103. The trigger back plate (PN 1052211) and Flush Mount Pistol Grip are
compatible with the following imager model numbers: WA9113-G1, WA9103-G1,
WA9112-G1 and WA9102-G1.
Note that the Flush Mount Pistol Grip is also compatible with the WA9009 1D auto-ranging
laser scanner; however this scanner is shipped with its own unique trigger back plate spe-
cially designed to interface with the Flush Mount Pistol Grip.

Warning: The installation of this scanner/imager end-cap must be performed using the
appropriate anti-static devices. If unavailable, discharge static from your
body by touching a grounded metallic object before opening any covers on
the unit.

Warning: Due to electrical incompatibility, the WA9300 kit cannot be used with the
EV15 1D imagers bearing Psion Teklogix part numbers 1050732 and
1050733. Please choose the imagers with part numbers 1050732-001 and
1050733-001 instead. The part number is located on the imager's label.

Warning: The use of optical instruments with this product will increase eye hazard.
This product may contain a laser scanner that emits less than 1.4 mW
maximum radiant power at a wavelength of 650 nm. This product complies
with CRH 21 CFR 1040 Class II and IEC 60825-1:1993+A1:1997+A2:2001
Class 2 laser product.

What’’s Included
1. Scanner Flex Assembly
2. Screws (6)
3. Kapton Tape
4. Back Plate
5. Pistol Grip Kit (4 screws included)

Warning: Back up any data in RAM before you begin; data are erased when the inter-
nal power of the WORKABOUT PRO3 is turned off.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 253

Chapter 7: Peripheral Devices & Accessories
The Trigger Back Plate Kit With Flush Mount Pistol Grip

Installing The Back Plate

•• If your unit is using AC power, disconnect it.
•• Remove the stylus from the end-cap.
•• Remove the battery pack. Switch off the internal power –– the switch is located inside the
battery compartment.
•• Loosen the four screws securing the end-cap, and remove the end-cap.
•• Unlatch the two connectors on the interface board on the new back plate.
Figure 7.1

J1
J2

•• Position the lower end of the new back plate next to the back opening of the unit.
•• Insert the flex cable from the end-cap into J2 on the interface board. The contacts on the
flex cable face towards the interface board.
Figure 7.2

Tape

Tape

•• Latch the connector.

254 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 7: Peripheral Devices & Accessories
The Trigger Back Plate Kit With Flush Mount Pistol Grip

•• Flip the back plate upwards.

•• Insert the flex cable from the WORKABOUT PRO3 main logic board into J1 on the
interface board. The contacts on the flex cable face towards the interface board.
•• Latch the connectors.
•• Cut the Kapton tape square provided in two equal pieces.
•• Remove the Kapton tape from the release liner. Apply one piece over the end of the flex
cable and the imager’’s flex connector. Apply the other piece over the other end of the
flex cable and the back plate flex connector, as shown in Figure 7.1. This secures the
flex cable at both ends.
•• Turn the back plate over.

•• Fasten the new back plate onto the WORKABOUT PRO3 using the supplied screws
(PN 9009770).

•• Switch on the internal power switch in the battery compartment.

•• Insert the battery, and install the battery compartment cover.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 255

Chapter 7: Peripheral Devices & Accessories
The Trigger Back Plate Kit With Flush Mount Pistol Grip

Installing The Flush Mount Pistol Grip

The Flush Mount Pistol Grip, model WA6103, is intended for use with second-generation
WORKABOUT PRO3 units (models 7527C-G2 and 7527S-G2) which have the Trigger
Back Plate installed. Review the first few paragraphs at the beginning of ““The Trigger Back
Plate Kit With Flush Mount Pistol Grip”” on page 253 for a list of compatible
scanners/imagers.

Important: Back up any data in RAM before you begin; data are erased when the inter-
nal power of the WORKABOUT PRO3 is turned off.

•• If your unit is using AC power, disconnect it.

•• Remove the battery cover and battery pack. Switch off the internal power –– the switch is
located inside the battery compartment.
•• Remove the screw-on cap, if present, from the switch in the middle of the back plate.

Battery Battery Pack Cover

Screws (4 X)

Switch

256 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 7: Peripheral Devices & Accessories
Protective Carrying Case

•• Lower the Flush Mount Pistol Grip into place over the back plate, aligning the screw
inserts on the hand-held with the screw holes in the pistol grip.

•• Insert and tighten the four screws provided with the pistol grip.
•• Switch the power back on.
•• Replace the battery and battery cover.
•• Insert the stylus in the bottom of the pistol grip handle.

7.5 Protective Carrying Case

A carrying case is available for WORKABOUT PRO3s to shield the unit from damage. It is
equipped with a soft plastic window to protect the unit display and keyboard. A variety of
cases are available, depending on the type of end-cap attached to your unit.

7.6 Soft Shell Holster

A soft shell holster with removable belt and swivel holster pad can be used to hang a
WORKABOUT PRO3 with a pistol grip from you waist

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 257

Chapter 7: Peripheral Devices & Accessories
Soft Shell Holster

Figure 7.3 Soft Shell Holster

Soft Shell Holster

Swivel Holster Pad and

Removable Belt

•• Insert the belt in the swivel holster pad.

•• Attach the pad on either the left or right side of the holster case, depending on whether
you are left- or right-handed.
•• Fasten the belt comfortably around your waist. Slide the adjustable ring on the belt to
tighten the holster in place.
•• Connect the safety tether cord to one of the clips on the bottom of the soft shell holster.
Connect the other end to the hole in the end of the WORKABOUT PRO3 pistol grip.
This tether will catch the unit in case of a drop. The tether can be adjusted to the opera-
tor’’s height. The clips will break away in case of a severe force.

258 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 7: Peripheral Devices & Accessories
The Batteries

7.7 The Batteries

Note: Review Chapter 8: ““Specifications”” for details.

The WORKABOUT PRO3 will operate with any of the following Lithium-Ion battery
packs:
•• High-Capacity –– Model WA3006
•• Super High-Capacity –– Model WA3010
In addition to the main battery, the hand-held is equipped with a replaceable, rechargeable
Lithium-Ion backup battery.

7.7.1 Secure Battery Cover

While the standard battery cover latches can be turned using your fingers or using the end of
your stylus, the optional Secure Battery Cover has special safety latches that can only be
locked and unlocked using a special tool –– Spanner #6 –– that fits into the dimples on the
safety latches.

Spanner #6

Secure Battery Cover Latches

(in locked position)

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 259

Chapter 7: Peripheral Devices & Accessories
Secure Battery Cover

•• Insert the spanner into an appropriate handle.

•• To unlock the secure battery cover, turn the spanner until the dimples are aligned
vertically.

•• To lock the secure battery cover, fit the spanner into the latch dimples, and turn the
spanner until the dimples are aligned horizontally.
The battery covers vary to accommodate the type of battery installed and the type of
WORKABOUT PRO you are using.

WORKABOUT PRO3 Secure Battery Cover

Battery Type
Variant Part Number

7527C-G2 High-Capacity –– Model No. WA3006 PN 1050922

Super High-Capacity –– Model No. WA3010 PN 1050924

7527S-G2 High-Capacity –– Model No. WA3006 PN 1050923

Super High-Capacity –– Model No. WA3010 PN 1050925

260 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 7: Peripheral Devices & Accessories
Adaptor Cable Options

7.8 Adaptor Cable Options

The following adaptors can be ordered for your WORKABOUT G2:

Model No. Adaptor Cable Description

WA1002 Tether to USB device. This cable is used to connect

USB devices such as USB Flash memory devices.
WA4020-G2 Tether to RS232. This is a full RS232 port on
COM2.
WA4001-G2 Tether to USB Client. (For ActiveSync)
WA4010-G1 USB to Ethernet adaptor.
WA4015 USB/RS232 adaptor. This cable is used with
docking station WA4003-G2.

7.9 Chargers And Docking Stations

Important: Keep in mind when ordering a charger or docking station, you must also
order the appropriate power cord separately.

Psion Teklogix offers a variety of chargers and docking stations for the WORKABOUT
PRO3. These include:
•• AC Adaptor––Model No. PS1050-G1
•• Automotive Adaptor––Model No. WA3113-G2
•• Single Battery Charger––Model No. WA3001-G1
•• Quad Battery Charger––Model No. WA3004-G1
•• Desktop Docking Station––Model No. WA4003-G2
•• Quad Docking Station For 7527C-G2––Model No. WA4204-G2
•• Quad Docking Station For 7527S-G2––Model No. WA4304-G2

7.9.1 Installation––Chargers And Docking Stations

When installing a charger or docking station, consider the following guidelines.
•• Keep chargers and docking stations away from excessive dirt, dust and
contaminants.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 261

Chapter 7: Peripheral Devices & Accessories
Power Consumption Considerations

•• Chargers will not charge batteries outside an ambient temperature range

of 0° C to 45 °C (32° F to 113° F). It is recommended that the charger or docking station
be operated at room temperature––between 18° C and 25° C (64° F to 77° F) for
maximum performance.
After unpacking your unit:
•• Visually inspect the charger for possible damage.
•• Install the IEC power cord and apply power.

7.9.2 Power Consumption Considerations

Check to ensure the mains circuit supplying chargers and/or docking stations is adequate for
the load, especially if several chargers and docking stations are being powered from the
same circuit.
•• Quad charger––can consume up to 2A @ 120VAC or 1A @ 240VAC.
•• Quad docking station––can consume up to 3A @ 120VAC or 1.5A @ 240VAC.

7.9.3 Operator Controls

WORKABOUT PRO3 docking stations and chargers have no operator controls or power
switches.

7.9.4 Important Charger Safety Instructions

•• SAVE THESE INSTRUCTIONS––This manual contains important safety and operat-
ing instructions for battery charger s.
•• Before using the battery charger, read all instructions and cautionary markings on
(1) battery charger, (2) battery, and (3) product using battery.
•• The mains power cord shall comply with national safety regulations of the country
where the equipment is to be sold.
•• Use of an attachment not recommended or sold by the battery charger manufacturer
may result in fire, electric shock, or personal injury.
•• To reduce risk of damage to the electric plug and cord when unplugging the charger,
pull the plug rather than the cord.
•• Make sure the cord is positioned so that it is not stepped on, tripped over, or otherwise
subjected to damage or stress.
•• Do not operate the charger with a damaged cord or plug. Replace immediately.
•• Do not operate the charger if it has received a sharp blow, been dropped, or otherwise
damaged in any way; it should be inspected by qualified service personnel.

262 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 7: Peripheral Devices & Accessories
Desktop Docking Station

•• Do not disassemble the charger; it should be repaired by qualified service personnel.

Incorrect reassembly may result in electric shock or fire.
•• To reduce risk of electric shock, unplug the charger from the outlet before attempting
any maintenance or cleaning.
•• An extension cord should not be used unless absolutely necessary. Use of an improper
extension cord could result in fire or electric shock. If an extension cord must be used,
make sure:
The plug pins on the extension cord are the same number, size and shape as those on
the charger.
The extension cord is properly wired and in good electrical condition and that the wire size
is larger than 16 AWG.
•• Do not expose the charger to rain or snow.
•• Do not place batteries in the charger if they are cold from extended exposure to a freezer
or outside temperatures below 10°C (50°F). Allow them to warm up to room tempera-
ture for at least two hours.
•• Do not use the charger if, after an overnight charge, any of the batteries feel warmer
than the charger housing. The charger should be inspected by qualified service
personnel.
•• Do not use the charger if any of the batteries or the charger get more than lukewarm.
The equipment should be inspected by qualified personnel.

7.10 Desktop Docking Station

The WORKABOUT PRO3 can be inserted in a desktop docking station, model number
WA4003-G2.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 263

Chapter 7: Peripheral Devices & Accessories
Desktop Docking Station

Figure 7.4 Desktop Docking Station

WORKABOUT PRO3
Release Button
Charge Well

Connector
Pins

LED
(Indicates charge status of
a spare battery inserted
in the rear charge well of
the docking station.)

Note: The desktop docking charger is shipped with its own user manual. It is critical that it
be reviewed for additional information and updates.

264 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 7: Peripheral Devices & Accessories
Charging A Battery Installed In The WORKABOUT PRO3

Figure 7.5 Back Of Desktop Docking Station

Spare Battery

Spare Battery
Charge Well

Client USB Port

Host USB Port

DC IN Socket

Important: This docking station can only be used to charge Psion Teklogix approved
Lithium-Ion batteries.

7.10.1 Charging A Battery Installed In The WORKABOUT PRO3

•• Insert the DC power cable to the DC IN socket on the desktop docking
station. Plug the pronged end of the cable into an AC outlet.
•• Slide the hand-held into the docking station, making certain that the LIF (Low Insertion
Force) port on base of the WORKABOUT is securely seated on the docking station
connector pins. An icon is displayed briefly in the navigation bar at the top of the hand-
held screen indicating that the unit is properly installed in the station–– .
3
The LED on the WORKABOUT PRO lights up indicating that the unit has external power
and battery charging will begin. It is safe to leave the unit in the desktop docking station
while it is not in use––the battery will not be overcharged.

7.10.2 Charging A Spare Battery

•• Insert the battery in the spare battery charge well at the back of the docking station,
aligning the contacts on the battery with the contacts in the spare battery charge well.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 265

Chapter 7: Peripheral Devices & Accessories
Battery Charge Duration

7.10.3 Battery Charge Duration

A fully discharged battery can take up to 5 hours to charge. The desktop docking station
stops applying power to the battery when it is fully charged––there is no risk of overcharge if
the battery remains in the charge well.

7.10.4 Charger LED Indicators

The desktop docking station is equipped with a single dual-coloured LED indicator in the
lower-right corner of the front panel.

Table 7.1 Desktop Docking Station Battery Charge LED Behaviour

LED Behaviour Charge Status

Off No battery detected in the slot.

Solid Green Charge complete.
Fast Flashing Green Battery charged to less than 80% of capacity.
Slow Flashing Green Battery charged to greater than 80% of capacity.
Solid Red Battery temperature outside of charge range –– 0° C to 50 °C.
Flashing Red Battery is not charging. Battery fault.

Note: Battery charging continues whether the hand-held is switched on or off.

7.11 Troubleshooting The Charging Operation Of The Dock

The quad battery charger troubleshooting section beginning on page 272 also applies to the
charging behaviour of the desktop docking station.

7.12 Linking A WORKABOUT PRO3 To A PC

The desktop docking station can be connected to a PC so that you can exchange files in
the same way that you would between PC drives. A USB cable is included with your
docking station.

Note: For details about data transfer through Windows XP and ActiveSync and through
Vista, refer to ““Data Transfer Between the PC & the Hand-Held”” on page 14.

266 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 7: Peripheral Devices & Accessories
Linking A WORKABOUT PRO3 To An Ethernet Network

To link the WORKABOUT PRO3 to a PC:

•• Insert the hand-held in the desktop docking station.
•• Insert the USB cable into the docking station Client USB connector. Attach the other
end of the cable to a USB port on the PC.

7.13 Linking A WORKABOUT PRO3 To An Ethernet Network

An USB-Ethernet adaptor cable –– model number WA4010-G1 –– is used to connect the
WORKABOUT PRO3 to an Ethernet network through a desktop docking station.
Figure 7.6 USB-Ethernet Adaptor Cable

Ethernet
Port
USB
Connector

•• Insert the adaptor’’s USB connector into the Host USB port on the desktop
docking station.
•• Connect your network Ethernet cable to the Ethernet port on the adaptor cable.

7.13.1 Network Access

The hand-held unit automatically detects insertion into the desktop dock and loads the ap-
propriate drivers to communicate with the USB-Ethernet converters.
Network Addressing
The host application uses standard TCP/IP protocol to name, locate and communicate with a
specific WORKABOUT PRO3 on the network. If a link is established between a WORK-
ABOUT PRO3 and a host, the application on the host and on the hand-held must have a
recovery mechanism in the event that the WORKABOUT PRO3 is removed from the dock,
interrupting the link.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 267

Chapter 7: Peripheral Devices & Accessories
Troubleshooting The Docking Station Operations

7.14 Troubleshooting The Docking Station Operations

The indicators, applications and drivers required to use and monitor the desktop docking
station as a dock (as opposed to a charger) are installed on the WORKABOUT PRO3––no
applications are present on the docking station itself.

7.15 AC Wall Adaptor–– Model #PS1050-G1

The AC wall adaptor available for your WORKABOUT PRO3 allows you to operate your
hand-held using AC power while charging the battery inserted in the unit.
Adaptor plugs suitable for use in the following countries are shipped with the AC wall adap-
tor: United Kingdom, Australia, Europe and North America.
Universal AC Power Supply

Adaptor Plugs

DC Power Plug

•• Choose the adaptor plug that is suitable for use in your country. Slide the adaptor plug
into the Universal AC power supply, snapping it into place. These two pieces, coupled
together, are referred to as an AC wall adaptor.
•• Insert the DC power plug into the DC IN socket at the base of WORKABOUT PRO3,
located between the tether and LIF ports.
•• Plug the pronged end into an AC outlet.

268 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 7: Peripheral Devices & Accessories
Automotive Adaptor––Model #WA3113-G2

7.16 Automotive Adaptor––Model #WA3113-G2

Important: It is critical that you review the safety instructions outlined in the quick start
guide enclosed with your automotive adaptor before using the accessory.

The automotive adaptor allows you to power your hand-held and recharge your battery
using power drawn from your vehicle’’s cigarette lighter outlet.
Figure 7.7 Automotive Adaptor
Adaptor End-Cap
DC Power Plug

Automotive
Adaptor Plug

•• Unscrew the adaptor end-cap, and remove the fuse inside the adaptor.
•• Replace it with the fuse provided with your kit, and screw the adaptor end-cap back into
position.
•• Insert the DC power plug into the DC IN socket at the base of the WORKABOUT
PRO3.
•• Insert the automotive adaptor plug into cigarette lighter outlet in your vehicle.

7.17 Single Battery Charger––Model #WA3001-G1

Figure 7.8 Single Battery Charger

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 269

Chapter 7: Peripheral Devices & Accessories
Inserting A Battery In The Single Battery Charger

The single battery charger is designed to charge a single battery. It has a DC IN socket and is
equipped with one LED that indicates the status of the charge process.

7.17.1 Inserting A Battery In The Single Battery Charger

•• Insert the DC power plug into the charger. Plug the AC adaptor into the AC outlet.
•• Install the battery, aligning the contacts on the battery with the contacts in the battery
charge well.

7.17.2 Battery Charge Duration

It can take up to 4 hours to fully charge a battery. The single battery charger stops applying
power to the battery when it is fully charged––there is no risk of overcharge if the battery
remains in the charge well. The 75% charge indicator is handy if you need a quick recharge––
a quick charge often takes less than one hour.

7.17.3 Charge Indicators––Single Battery Charge LED

The LED on the top of the charger indicates battery charge progress.

Table 7.2 Charger LED Behaviour

LED Behaviour Charge Status

Off No battery detected in the charge well.

Solid green Battery is fully charged.
Fast flashing green Battery is charged to 75% of capacity.
Slow flashing green Charge in progress.
Solid red Battery is outside ambient temperature range of
0° C to 45 °C (32° F to 113° F).
Flashing red Charge alarm indicating a charging circuit problem.
Refer to ““Troubleshooting”” on page 272 for details.
Flashing red then green in a Power up test sequence.
3 second cycle

270 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 7: Peripheral Devices & Accessories
Quad Battery Charger––Model #WA3004-G1

Note: Battery charging continues whether the hand-held is switched on or off.

7.18 Quad Battery Charger––Model #WA3004-G1

Figure 7.9 Quad Battery Charger

Note: The gang charger is shipped with a user manual. It is critical that this manual be
reviewed for additional information and updates.

The quad battery charger is designed to charge up to four Lithium Ion batteries at one time.

7.19 Charging Batteries

•• Slide the battery into a charge well, aligning the contacts on the battery with the contacts
in the charge well.

7.20 Battery Charge Duration

A fully discharged battery can take up to 4 hours to charge. The quad battery charger stops
applying power to the battery when it is fully charged––there is no risk of overcharge if the
battery remains in the charge well. The 75% charge indicator is handy if you need a quick
recharge––a quick charge often takes less than one hour.

7.21 Charge Indicators––The LEDs

Each battery charge well is equipped with an LED to indicate the charge status of the bat-
tery. When a battery is inserted in the charger, the colour and behaviour of the LED

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 271

Chapter 7: Peripheral Devices & Accessories
Troubleshooting

associated with the charge well in use indicates the status of the charge. Refer to Table on
page 270 for details.

7.22 Troubleshooting
7.22.1 Excessive Charge Duration
The charger is equipped with a recalibration function––a function that fully discharges and
then fully recharges the battery. This process is necessary to recalibrate the battery capacity
gauge internal to the battery. The charger attempts recalibration when:
•• the battery capacity is at less than 30%, and
•• the battery has undergone more than 40 partial charge cycles since the last full
discharge.
The recalibration function extends the charge time by up to 2 hours.

7.22.2 Indicator Flashing Red

If the indicator flashes red:
•• Remove all batteries and disconnect the mains power cable.
•• Wait at least 20 seconds, and then plug the cable in again.
If any of the charge well LEDs continue to flash red, the charger is defective and requires
service. If all indicators are flashing red, there is a power supply problem and the charger
requires service.

7.22.3 Power LED Does Not Light Up

•• Remove all batteries, and unplug the charger.
•• Connect another device to the mains outlet to ensure there is power.
•• Remove the IEC mains power cable from the charger, and check it for damage.
•• Reconnect the mains cable in the charger and mains outlet.
If the power LED still does not light up:
•• Unplug the mains cable, and check the fuse at the rear of the charger.
If the fuse appears to be intact, the charger requires service.

7.22.4 Indicator Does Not Light When Battery Installed

•• Remove the battery, and clean the contacts on the battery and the charge well.

272 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 7: Peripheral Devices & Accessories
Quad Docking Station––WA4204-G2 & WA4304-G2

•• Reinstall the battery, and check that it is fully seated in the charger well.
•• Inspect the charge well contacts for damage (are they bent, flattened, twisted or broken).
•• Try inserting a battery that you know to be working in the charger well.
•• Reconnect the mains power cable, and check that the charger well indicator flashes at
power up.

7.23 Quad Docking Station––WA4204-G2 & WA4304-G2

Figure 7.10 Quad Docking Station

Note: WA4204-G2 is designed for WORKABOUT PRO3 C models; WA4304-G2 is

designed for WORKABOUT PRO3 S models.
The quad docking station is shipped with a docking manual. It is critical that this
manual be reviewed for additional information and updates.

The quad docking station permits each of four docked WORKABOUT PRO3s to communi-
cate with a 10/100 BaseT Ethernet network at greater than 2Mbps. It also provides sufficient
power to operate and fast charge the batteries in the units.

7.23.1 Quad Docking Station Setup

After unpacking the unit:
•• Visually inspect the unit for any damage.
•• Install the IEC power cord and apply power.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 273

Chapter 7: Peripheral Devices & Accessories
Quad Indicators

A green indicator in the lower-right corner of the front panel lights up to indicate that power
is present.
•• Attach a CAT5 RJ45 network patch cable (supplied) between your network and the
RJ45 jack on the rear of the dock.
A green LED is illuminated next to the RJ45 connector when a valid network link
is established.
A user application must be loaded onto each WORKABOUT PRO3 that utilizes the quad
dock for communication. When the network is connected and this application is loaded, the
quad dock is ready for use.

7.23.2 Quad Indicators

The quad dock is equipped with a power indicator LED and RJ45 link and traffic indicator
LEDs. When a valid network link is established, a green LED is illuminated next to the
RJ45 connector.

7.23.3 Inserting A WORKABOUT In The Quad Docking Station

•• Slide the V into the cradle portion of the quad dock until lightly latched.
The hand-held detects that it is in a quad dock and momentarily displays the appropriate
icon in the navigation bar at the top of the screen –– . The LED on the hand-held unit
lights up to show it has external power and may start charging the battery.
Interaction with the WORKABOUT PRO3 while in the quad dock is a function of the user
application software used to communicate with the host network.

7.23.4 Network Access

The quad docking station has one 10/100 Ethernet port. You can insert up to four hand-held
units. The hand-helds are connected to an internal USB hub. The hand-held unit automati-
cally detects insertion into a quad docking station and loads the appropriate drivers to
communicate with the USB/Ethernet converters.

7.23.4.1 Network Addressing

Although the USB converters have fixed Ethernet MAC addresses, there is generally no cor-
relation between these addresses and a specific hand-held. The host application uses
standard TCP/IP protocol to name, locate and communicate with a specific WORKABOUT
PRO3 on the network.

274 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 7: Peripheral Devices & Accessories
Battery Charging––LED Behaviour

If a link is established between a WORKABOUT PRO3 and a host, the application on the
host and on the hand-held must have a recovery mechanism in the event that the WORK-
ABOUT PRO3 is removed from the dock and the link is interrupted.

7.23.5 Battery Charging––LED Behaviour

The quad docking station supplies DC power to enable the WORKABOUT PRO3 internal
fast charger. Charge status is displayed on the hand-held LED––the LED turns red while the
battery is being charged and turns green once the charge is complete. If the battery is fully
charged when the unit is inserted in the docking station, the LED flashes red for less than a
second and then turns green. Battery charging continues whether the WORKABOUT PRO3
is switched on or off.
It can take up to 4 hours to fully charge the internal battery.

7.23.6 Troubleshooting
The indicators, applications and drivers required to use and monitor the docking station are
installed on the WORKABOUT PRO3––no indicators or applications are present on the
docking station itself.

7.23.6.1 Network Link Unsuccessful

If a network link fails, the WORKABOUT PRO3 application alerts the operator that the link
was unsuccessful.

7.23.6.2 Hand-Held LED Does Not Light When Docked

•• Check that the quad docking station has power––is the Power LED on the docking station
illuminated?
•• Try inserting the WORKABOUT PRO3 in another well in the quad dock.
•• Check for dirt or contamination on the docking contacts at the bottom of the WORKA-
BOUT PRO3. Wipe the contacts with a damp cloth if necessary.
•• Check the pogo pins inside the dock cradle for dirt. Gently wipe with a damp cloth if
they appear to be dirty or discoloured.
•• Check that the pogo pins are not bent or damaged.
•• Remove and reinsert the WORKABOUT PRO3 in the cradle, and check that the latch is
holding the unit in place (the pogo pins must be compressed for proper contact).
•• Make certain that the battery installed in the WORKABOUT PRO3 is not defective.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 275

Chapter 7: Peripheral Devices & Accessories
The Vehicle Cradle

7.24 The Vehicle Cradle

The vehicle cradle is a highly ruggedized, single station dock. Although it provides quick in-
sertion and removal, the cradle holds the WORKABOUT PRO3 securely even when
operated in high vibration environments.

Note: Shock and vibration specifications for the WORKABOUT PRO3 are verified using
Psion Teklogix-approved RAM mounts and mounting hardware. Use of non-certified
Psion Teklogix mounting hardware is not recommended, and may void warranty
coverage.

The model number for vehicle cradles varies depending on the type of hand-held:
•• WORKABOUT PRO3 C –– Model # WA1210-G2
•• WORKABOUT PRO3 S –– Model # WA1310-G2
A port replicator option is available for powered vehicle cradles. Refer to ““The Port Replica-
tor”” on page 279 for details.

7.24.1 Vehicle Cradle Mounting Recommendations

Before mounting a vehicle cradle in a vehicle, there are a number of operator safety issues
that require careful attention. An improperly mounted cradle may result in one or more of
the following: operator injury, operator visibility obstruction, operator distraction and/or
poor ease of egress for the operator. Psion Teklogix strongly recommends that you seek pro-
fessional mounting advice from the vehicle manufacturer.
Cable routing within a vehicle cab also requires careful consideration, especially for sepa-
rately tethered scanners and other devices with loose cables. If you are unable to obtain
suitable advice, contact Psion Teklogix for assistance go to:
www.psionteklogix.com/service-and-support.htm
Note also that for better protection, the equipment should be mounted inside the vehicle roll
cage.
Pedestal mounts are recommended for all fixed mount locations because they offer optimal
operator access. In addition, for safety reasons, only pedestal mounts with fully locking
joints should be used in vehicles. Always adjust the pedestal for the optimum viewing angle,
and securely tighten the hex and wing screws.
The most effective way to mount the vehicle cradle is to use the four #8-32 threaded inserts
on the rear of the unit. Bolts must not extend more than 10mm (3/8") into the cradle.
To accommodate the service loop of the connector cable, leave a 4" clearance at the bottom
of the cradle. Leave a 7" (minimum) clearance at the top of the cradle to allow easy removal

276 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 7: Peripheral Devices & Accessories
Mounting Template

of the hand-held. Also remember to leave at least a 3" clearance at the sides of the cradle to
allow activation of the release knobs. Refer to the detailed assembly instructions that are
packaged with the cradle when selecting a mounting location.

7.25 Mounting Template

The vehicle cradle is shipped with detailed mounting instructions including a drill template.

7.26 Wiring Guidelines

Before installing cables between the cradle and other devices, review the following:
•• Ensure that drilling holes will not damage the vehicle or its wiring.
•• Protect cable runs from pinching, overheating and physical damage.
•• Use grommets to protect cables that pass through metal.
•• Use plastic straps and tie-downs to secure cables and connectors in their desired loca-
tion, away from areas where they may get snagged or pulled.
•• Keep cables away from heat sources, grease, battery acid and other potential hazards.
•• Keep cables away from control pedals and other moving parts that may damage the
cables or interfere with the operation of the vehicle.

7.27 Using The Vehicle Cradle

If your WORKABOUT PRO3 is equipped with a shoulder strap or cover, these accessories
need to be removed before installing the unit in a vehicle cradle. There is no need to remove
hand straps, pistol grips or tethered devices from the unit.
•• Slide the WORKABOUT PRO3 into the cradle, and press firmly downward until it
locks into place. On a vehicle, it’’s a good idea to pull up on the WORKABOUT PRO3
to be certain that it is secure.
•• To remove the unit, press firmly on the RELEASE button on the front face of the
unit until it releases from it latch. The hand-held will be slightly raised so that it can
be removed.

7.28 Maintaining The Vehicle Cradle

Two latches in the cradle hold the WORKABOUT PRO3 firmly in place. Although these
latches are designed for robustness and endurance, they will wear over time and will no
longer lock the hand-held securely in the cradle. For replacement parts and instructions
contact Psion Teklogix. Partial disassembly is required.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 277

Chapter 7: Peripheral Devices & Accessories
Powered Cradle Installation In High Voltage Vehicles

7.29 Powered Cradle Installation In High Voltage Vehicles

Voltages exceeding 60VDC are considered hazardous. For powered cradle installations on
vehicles with batteries above this voltage, ensure the powered cradle power connector is
mounted in a dry location on the vehicle, or that the connector is insulated with an appropri-
ate waterproof material after installation. The connector must also be installed out of the
vehicle operator’’s reach. Exposing an accessible power connector to water or other liquids
could create a hazardous situation resulting in serious injury or death.
Installation of powered cradles in vehicles that operate above 60VDC require special
consideration.
Due to the hazardous voltages present on these vehicles, it is necessary to ensure that the
powered cradle power supply cable connector is not accessible to the vehicle operator, and
does not get exposed to water or other liquids. This can be accomplished in one of the fol-
lowing ways:
•• Ensure the power connector is installed in a dry location on the vehicle, away from the
vehicle operator’’s reach (perhaps under a vehicle dash or in a sealed housing).
•• Cover the power connector with a waterproof heat shrink material.
•• Wrap the connector securely with a waterproof electrical tape in an area out of the
vehicle operators reach.
All other installation requirements outlined in this document should also be followed for
High Voltage vehicles to insure safe installation and operation of the powered cradle.

7.30 Powered Vehicle Cradle Installation

The powered cradle is designed to allow the WORKABOUT PRO3 to be powered by a
vehicle battery. The battery installed in the hand-held is also recharged by the vehicle
battery. This option accepts DC power sources ranging from 9 to 20V, with optional pre-
regulator.
The vehicle cradle can be ordered with the powered cradle option installed.
Applying a voltage greater than that specified or reversing or reversing polarity may result
in permanent damage to the cradle power option and will void the product warranty.

7.30.1 Wiring Vehicle Power To The Cradle

An optional 1.8 meter (6 foot) extension power cable (PN 13985) compatible with your
powered vehicle cradle can be purchased from Psion Teklogix. This optional cable should
be wired to a filtered, fused (maximum 10A) accessory supply on the vehicle. The power

278 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 7: Peripheral Devices & Accessories
The Port Replicator

cradle draws no more than 8A (less if the accessory supply is greater than 12V). Any addi-
tional wiring, connectors or disconnects used should be rated for at least 10A.
The red lead of the power cable attaches to the positive vehicle supply. The black lead con-
nects to the negative supply––this should be connected to a proper terminal block and not to
the vehicle body. The power cradle is fully isolated and can be used with both negative and
positive chassis vehicles.
You may have the option of connecting power before or after the ‘‘key’’ switch. It is prefera-
ble to wire the power cradle after the key switch––that is, it cannot be turned on without the
key on. However, if the operator switches the key off repeatedly for long periods during a
shift, it may make more sense to wire the cradle before the switch.
Keep in mind that the WORKABOUT PRO3 will continue to operate with or without
vehicle power as long as its battery has sufficient charge.
If an unfused power source must be used, a fuse assembly (PN 19440) must be added to the
extension power cable (the fuse and instructions are supplied with the cable). Use only a
10A slow blow UL approved fuse in the fuse assembly.

7.31 The Port Replicator

The port replicator (Model# WA4005-G1) is an optional accessory that allows tethered
devices as well as mounted peripherals (e.g., bar code printers or weigh scales) to be
attached to the vehicle cradle. The replicator can be used with or without the cradle
power option.
The functionality of the WORKABOUT PRO3 tether port is replicated into RS-232 serial
interfaces by the port replicator. It provides the user with 3 DB9 serial interfaces as well as
one Type B USB port (for connecting a Host device).

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 279

Chapter 7: Peripheral Devices & Accessories
Scanners And Imagers

7.32 Scanners And Imagers

The WORKABOUT PRO3 supports a wide range of scanner/imager options to address a
variety of user application requirements. Refer to Appendix C: ““Teklogix Imagers Applet””
and Appendix D: ““Bar Code Settings”” for details about configuring the unit installed in your
hand-held.
Scanner/imagers available for your hand-held include:

Scan Engine Kit Model Number

1D Laser SE955 WA9102-G1

WA9112-G1
WA9002-G1

1D Laser SE1223HP WA9000-G1

1D Laser SE1223LR WA9005-G1

1D Laser SE1524ER WA9009

1D Imager EV15 WA9103-G1

WA9113-G1
WA9003-G1

2D Imager HHP 5180 WA8010-G1

WA9212-G1

2D Imager SX5400 WA9008

It is critical that you review the safety information in the WORKABOUT PRO Hand-Held
Computer Regulatory & Warranty Guide, PN 8000126, before proceeding.

7.32.1 Scanning Techniques

•• Hold the scanner at an angle. Do not hold it perpendicular to the bar code.
•• Do not hold the scanner directly over the bar code. In this position, light can reflect back
into the scanner’’s exit window and prevent a successful decode.
•• Scan the entire bar code. If you are using a 1D or PDF laser scanner, make certain that
the scan beam crosses every bar and space on the bar code, including the margins on
either end of the symbol.

280 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 7: Peripheral Devices & Accessories
Troubleshooting

•• If you are using a 2D imaging scanner, make certain the red, oval shaped framing mark
is centred within the bar code you want to scan.
•• When using imaging scanners, do not move the scanner while decoding the bar code.
Movement blurs the image.
•• Hold the scanner farther away for larger bar codes.
•• Hold the scanner closer for bar codes with bars that are close together.
A bar code icon appears on the screen during a scan. While the scanner beam is active, the
onscreen message states: SCANNING. If you want to turn off the onscreen message, disable
““Scan Indication”” in the Options tab of the Scanner Settings menu in the Control Panel
When the scan is successful, the bar code data is displayed on the screen until the scan
button (or pistol trigger) is released, but only if ““Scan Result”” is turned on in the Options tab
of the Scanner Settings menu in the Control Panel.

7.32.2 Troubleshooting
If the scanner is not working, investigate the following:
•• Is the unit on?
•• Check that the bar code symbology being scanned is enabled for the hand-held you are
using. Check any other parameters that affect the scanning procedure or the bar code.
•• Check the bar code to make sure it is not damaged. Try scanning a different bar code to
verify that the problem is not with the bar code.
•• Check that the bar code is within the proper range.
•• Does the hand-held display the warning without scanning? This suggests a hardware
problem in the hand-held.
•• Is the laser beam scanning across the bar code?
•• Once the scan beam has stopped, check the scanner window for dirt or fogging.

7.32.3 Operating One Dimensional (1D) Laser Scanners

•• Turn the hand-held on. Wait until the unit has booted up completely.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 281

Chapter 7: Peripheral Devices & Accessories
Operating Two Dimensional (2D) Imagers

Important: If an aiming dot is available on the installed scanner, the dot will be enabled
for a configurable time period (including off), after which normal scanning
begins. Refer to ““Dot Time (msec)”” on page D-2 of Appendix D: ““Bar Code
Settings””for details.
Double-clicking the trigger will override the aiming delay and initiate an
immediate scan. Note that the aiming dot is standard on long-range and
high visibility internal scanners.

•• Aim at the bar code and press the scan key or the trigger. A scan beam and a warning
indicator appear until a successful decode is achieved or six seconds have elapsed.

7.32.4 Operating Two Dimensional (2D) Imagers

An imager takes a snap shot of a single bar code or multiple bar codes (at one time). It can
find a bar code regardless of its orientation——that is, even a bar code printed at a 45 degree
angle to the hand-held will be decoded successfully.

Note: When scanning multiple bar codes, ensure that all of the desired bar codes are
within the field of view of the scanner. It is possible that even when all bar codes are
within the field of view, not all of them will be decoded. Only successfully decoded
bar codes are passed to the application program. The application program then
issues a warning, asking that you scan the missing bar codes.
When scanning a single bar code, ensure that only the desired bar code is within the
field of view of the scanner.

Because imagers generally have a shorter depth of field than laser scanners, some practise
may be required to find the optimal distance from the types of bar codes being scanned. Al-
though the imager includes illumination LEDs, ambient light will help the imager decode
the bar codes, especially if the bar code is far from the hand-held.

Important: Keep in mind that the imager scanner is a camera, and the LED illumination
is a flash. Glare can be an issue on reflective media such as plastic coated
bar codes, just as glare is an issue for photographers. When pointing at a
shiny surface, either shift the bar code to the side or top, or angle the bar
code so that the glare reflects away from the imager scanner.
Most imagers take several ‘‘snap shots’’ of the bar code in order to decode it.
It is normal for the LEDs to flash two or three times. Hold the unit steady
between flashes to improve decode performance.

282 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 7: Peripheral Devices & Accessories
Bluetooth Peripherals

•• Turn the hand-held computer on. Wait until the unit has booted up completely.
•• Aim at the bar code and press the scan key or the trigger. Hold the trigger until a suc-
cessful or failed scan result is obtained.
•• When the scan button or trigger is pressed, a red, oval shaped light (the framing marker)
is displayed. Centre the framing marker in the field——either in the centre of the bar code
you want to scan or in the centre of the area in which multiple bar codes are to be
scanned.
The illumination LEDs will flash (typically several times) and a picture of the bar code(s)
is taken.

7.33 Bluetooth Peripherals

The WORKABOUT PRO3 is equipped with a Bluetooth radio, making it is possible to com-
municate with a variety of Bluetooth peripherals, including GSM/GPRS handsets, scanners,
printers, and so on.
The range of the Bluetooth radio is limited to approximately 5 meters.
Psion Teklogix provides built-in support for the Bluetooth peripherals listed below.
•• GSM/GPRS universal handset
•• Bluetooth printer
•• Bluetooth headset
Keep in mind that Bluetooth and IEEE 802.11b/g radios both operate in the 2.4GHz band.
Although the WORKABOUT PRO3 includes features to minimize interference, perfor-
mance of the system will not be optimal if you use both radios simultaneously. Typically,
when both radios operate in the hand-held at the same time, they cannot transmit simultane-
ously––this has a negative impact on overall system throughput. To minimize the impact on
the backbone 802.11g network, Psion Teklogix recommends using Bluetooth peripherals
that have low transaction rates (such as printers and scanners).
Refer to ““Bluetooth Setup”” on page 201 for information about setting up your Bluetooth
devices for communication. In addition, review the manual shipped with your Bluetooth
device to determine the method used to pair with the WORKABOUT PRO3 host.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 283

SPECIFICATIONS 8
8.1 Hand-Held Computer Specifications. . . . . . . . . . . . . . . . . . . . . . . . . .287
8.2 Radio Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .292
8.2.1 Model RA2041: 802.11 b/g Direct Sequence Spread Spectrum (DSSS) . .292
8.2.2 Model RA3030-G2 GSM/GPRS/EDGE Radio . . . . . . . . . . . . . . .292
8.2.3 Model RA3040-G2 (Siemens HC25 UMTS Modem) . . . . . . . . . . . .294
8.2.4 Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .296
8.3 Battery Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .296
8.3.1 High-Capacity (Model WA3006) . . . . . . . . . . . . . . . . . . . . . .296
8.3.1.1 Electrical Specifications. . . . . . . . . . . . . . . . . . . . . . .296
8.3.1.2 Standard Discharge . . . . . . . . . . . . . . . . . . . . . . . . .298
8.3.1.3 Safety Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . .300
8.3.1.4 Safety License . . . . . . . . . . . . . . . . . . . . . . . . . . . .300
8.3.1.5 Environmental Test . . . . . . . . . . . . . . . . . . . . . . . . .301
8.3.2 Super High-Capacity (Model WA3010) . . . . . . . . . . . . . . . . . . .302
8.3.2.1 Electrical Specifications. . . . . . . . . . . . . . . . . . . . . . .302
8.3.2.2 Standard Discharge . . . . . . . . . . . . . . . . . . . . . . . . .304
8.3.2.3 Safety Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . .306
8.3.2.4 Safety License . . . . . . . . . . . . . . . . . . . . . . . . . . . .306
8.3.2.5 Environmental Test . . . . . . . . . . . . . . . . . . . . . . . . .307
8.4 Scanner/Imager Model Numbers. . . . . . . . . . . . . . . . . . . . . . . . . . . .308
8.5 Scanner Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .308
8.5.1 SE1223HP, LR And SE955HP Specifications . . . . . . . . . . . . . . . .308
8.5.1.1 SE 1223HP Decode Zone . . . . . . . . . . . . . . . . . . . . . .310
8.5.1.2 SE 1223LR Decode Zone . . . . . . . . . . . . . . . . . . . . . .310
8.5.1.3 SE 955HP Decode Zone . . . . . . . . . . . . . . . . . . . . . . 311
8.5.2 SE1524ER Scanner Specifications . . . . . . . . . . . . . . . . . . . . . . 311
8.5.2.1 SE1524 Scanner Decode Zone . . . . . . . . . . . . . . . . . . .313
8.5.3 EV15 Imager Specifications . . . . . . . . . . . . . . . . . . . . . . . . .314
8.5.3.1 EV15 Imager Decode Zone . . . . . . . . . . . . . . . . . . . . .315
8.5.4 SX5400* Imager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .315
8.5.4.1 SX5400 Imager Performance . . . . . . . . . . . . . . . . . . . .316
8.5.5 HHP5180 Imager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .317

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 285

 8.5.5.1 HHP5180 Imager Decode . . . . . . . . . . . . . . . . . . . . . 318

286 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 8: Specifications
Hand-Held Computer Specifications

8.1 Hand-Held Computer Specifications

Model Variants
•• WORKABOUT PRO3 C –– Model 7527C-G2
•• WORKABOUT PRO3 S –– Model 7527S-G2
Platform
•• PXA270M @ 624 MHz, 32 bit RISC CPU
•• 1024 MB Flash ROM, 256 MB RAM
Operating System
•• Microsoft Windows Mobile 6.1 Classic
•• Microsoft Windows Mobile 6.1 Professional
Wireless Communication
Optional expansion modules for:
•• 802.11b/g (via Compact Flash) operating in the 2.4GHz band:
•• Supports IEEE 802.11b data rates of 1,2,5.5 and 11Mbps using Direct Sequence Spread
Spectrum (DSSS).
•• Supports IEEE 802.11g data rates of 6,9,12,24,36,48 and 54Mbps, using Orthagonal
Frequency Division Multiplexing (OFDM) base band modulation
•• GSM/GPRS EDGE (via expansion interface)
- Quad Band - 850/900/1800/1900 Voice and Data
•• UMTS/HSDPA (via expansion interface)
- Triple band - 850/1900/2100 MHz Voice and Data
•• Integrated Bluetooth class II, ver 2.0 + EDR
•• Working Range:16.4 ft.to 32.81 ft. (5m to 10m)

Note: 802.11b/g, GSM, and Bluetooth are available simultaneously.

Bar Code Application Options

•• 1D laser scanning expansion module
•• 2D linear imager expansion module
•• Optional bolt-on pistol grip

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 287

Chapter 8: Specifications
Hand-Held Computer Specifications

Note: All expansion modules can be factory configured or user upgradeable.

RFID Module Options

•• HF Module
- Frequency: 13.56 MHz
- Tags supported: ISO 15693, Philips I Code™™; TI TagiIt™™; Tagsys (C210, C220,
C240, C270)
- Read/write range up to: 3.15 in.(80 mm)
•• MIFARE module
- Frequency: 13.56 MHz
- Tags supported: ISO 14443 A&B, Mifare
- Read/write range up to: 1.97 in.(50 mm)
•• LF module
- Frequency: 125 KHz, 134.2 KHz
- Tags supported: EM 4x0x, EM 4x50; Hitag 1 & 2; ISO HDXA & FDXB
- Read/write range up to: 2.756 in.(70 mm)
•• UHF module
- Frequency: 868 MHz or 915 MHz
- Read range: up to 4.92 ft.(150 cm) [915 MHz] and up to 2.62 ft.(80 cm) [868 MHz]
- Tag supported: EPC Class 1 Gen 2, other protocols depending on regions
User Interface
•• Color Touch Screen Display 3.6 in.(9.144 cm) diagonal
- Full VGA 480x640 resolution
- Transflective, portrait mode TFT
- Adjustable Backlight
- Sunlight readable (for outdoor use)
- High reliability LED backlight
- Easily replaceable and customizable bezel
•• Touchscreen
- Passive stylus or finger operation

288 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 8: Specifications
Hand-Held Computer Specifications

- Signature capture
•• Keyboards
- Full Alpha-Numeric (C model)
- Numeric (S model)
- Ergonomically enhanced for ambidextrous, one-hand operation
- Backlit, high durability hard-capped keys
•• Indicators And Controls
- LED indicates battery charge status
•• Audio
- 90 db mono speaker
- Mono microphone
- 86 db beeper
Programming Environment
•• HTML, XML
•• Psion Teklogix Mobile Devices SDK
•• Hardware Development Kit (HDK)
•• .NET and C++ programming using Microsoft® Visual Studio® 2005
•• Java programming supporting JDK 1.2.2 or higher
•• Standard Protocol APIs Windows sockets (CE.net)
Application Software
•• Internet Explorer® Mobile included with Windows Mobile 6.1
•• Windows Mobile Device Center
•• Phone dialer and Personal Information Manager (PIM) included with Windows Mobile
6.1 Professional
•• PTX Connect VoIP
•• Optional Open TekTerm terminal emulation software, supports IBM 5250,IBM 3270,
HP2392, ANSI and TESS
•• Mobile Control Center (MCC) device management
Expansion Slots
•• One SD/MMC memory card slot –– user accessible
•• End-cap USB Interface supports GPS expansion module

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 289

Chapter 8: Specifications
Hand-Held Computer Specifications

•• 100-PIN expansion interface: supports PCMCIA (type II),GSM/GPRS EDGE and other
third-party expansion modules developed using Psion Teklogix WORKABOUT PRO
Hardware Developer’’s Kit
•• Flex cable interface with robust connector: supports scanner (serial) and imager (USB)
modules
•• One Type II CF Card Slot
External Connectors
•• One Tether connection with full RS232 and USB 1.1 functionality
•• One Low-Insertion Force (LIF) docking connector
•• DC Power Jack
Power Management
•• Optional 3.7V, 3000 mAh High-Capacity Battery Pack
•• Optional 3.7V, 4000 mAh Super High-Capacity Battery Pack
•• Advanced Smart Battery with gas gauge
•• 3 power source options: Runs off battery, AC power or automotive power supplies
•• Built-in charger
•• Rechargeable, user replaceable backup battery pack
Environmental
•• Withstands multiple drops from 6 ft (1.8 meters) or 26 drops (on 12 edges, 8 corners, 6
faces) at 5 ft.(1.5 meters) to concrete while powered on and configured with accessories
such as WiFi radio, scanner/imager, and pistol grip
•• Rain/Dust: IP65, IEC 60529
•• Operating Temperature: - 4°F to 122°F (-20°C to +50°C)
•• 5%-95% RH non-condensing
•• Storage Temperature: -40°F to 140°F (-40°C to +60°C)
•• ESD: ± 8kVdc air discharge, ± 4kVdc contacts
Physical Dimensions And Weight
•• WORKABOUT PRO3 C:
- 8.775 in. x 2.95/3.94 in. x 1.22/1.65 in. (223 mm x 75/100 mm x 31/42 mm)
•• WORKABOUT PRO3 S:
- 7.87 in. x 2.95/3.94 in. x 1.22/1.65 in. (200 mm x 75/100 mm x 31/42 mm)

290 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 8: Specifications
Hand-Held Computer Specifications

•• Weight (w/o battery pack):

- WORKABOUT PRO3 C: 1 lbs (455 g)
- WORKABOUT PRO3 S: .859 lbs (390 g)
Power Accessories
•• AC power supply (charge & operate hand-held)
•• Automotive power supply (charge & operate hand-held)
•• Single and Quad slot battery pack chargers
•• Powered cradle for vehicle mount applications
Communication Accessories
•• Quad Dock (4-site) with 10/100 BaseT Ethernet and charge functions
•• Desktop Docking Station (charges hand-held & spare battery) provides USB1.1 host
and device ports and supports optional plug-on expansion modules supporting 10/100
BaseT Ethernet or RS232 connections
•• USB cable supports Active Sync without requiring a docking station
•• Optional End-Caps supporting RS232, TTL, and IrDA
Carrying Accessories
•• Hand-strap, pistol grip with trigger, holster and various protective carrying cases and
pouches
Approvals
•• Safety:
- CSA/UL60950-1, IEC 60950-1, EN60950-1
•• EMC:
- FCC Part 15 Class B
- EN 55022
- EN 55024
- EN 301 489
•• Laser:
- IEC 60825-1, Class 2
- FDA 21 CFR 1040.10.
- 1040.11 Class II
•• Bluetooth: class II, V 2.0

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 291

Chapter 8: Specifications
Radio Specifications

•• RF:
- Bluetooth and 802.11b/g: EN300 328, Part 15.247
- GSM/GPRS: EN301 511; EN50360/361, NAPRD03; 3GPP51.010; FCC Parts 22 &
24; Industry Canada; RSS-132 & 133
•• In-Vehicle Cradle: e Mark

8.2 Radio Specifications

8.2.1 Model RA2041: 802.11 b/g Direct Sequence Spread Spectrum (DSSS)
Form factor Compact Flash Type I extended
Antenna port Two Hirose U.FL connectors for antenna diversity
Transmit Power 802.11g: 32mW maximum (+15 dBm)
802.11b: 80mW maximum (+19 dBm)
Frequency Range 2.400 - 2.4897 GHz
Channels FCC: 11
ETSI: 13
TELEC: 13
RX Sensitivity -96dBm @ 1Mbps, -90dBm @ 11Mbps,
-94dBm @ 6Mbps, -75dBm @ 54Mbps
Data Rates 802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps
802.11b: 1, 2, 5.5, 11 Mbps

8.2.2 Model RA3030-G2 GSM/GPRS/EDGE Radio

Quad-Band GSM 850/900/1800/1900 MHz
EDGE (E-GPRS) multi-slot class 12
GPRS multi-slot class 12
GSM release 99
Output power: - Class 4 (2 W) for EGSM850
- Class 1 (1 W) for GSM1800
- Class 1 (1 W) for GSM1900
Control via AT commands

292 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

(Hayes 3GPP TS 27.007 and 27.005)
SIM Application Toolkit (release 99)
Supply voltage range: 3.2 to 4.3 V
Specifications for:
EDGE data transmission: EDGE class 12: max 236.8 kbps (downlink)
Mobile station class B
Modulation and coding scheme MCS 1-9
GPRS data transmission: GPRS class 12
Mobile station class B
PBCCH support
Coding schemes CS 1-4
CSD data transmission: Up to 14.4 kbps
V.110
Non-transparent mode
USSD support
SMS: Point-to-point MO and MT
SMS cell broadcast
Text and PDU mode
Fax: Group 3, class 1
Voice: Triple-rate codec for HR, FR, and EFR
Adaptive multi-rate AMR
Basic hands-free operation
Echo cancellation
Noise reduction
Interfaces: Hirose U.FL-R-SMT 50 ohm antenna connector
Molex 80-pin board-to-board connector
- Power supply
- Audio: 2x analog, 1x digital
 - 2 x serial interface (ITU-T V.24 protocol)
- USB 2.0 full speed
- SIM card interface 3 V, 1.8 V

8.2.3 Model RA3040-G2 (Siemens HC25 UMTS Modem)

Frequency band: UMTS/HSDPA: Triple band, 850//1900/2100MHz
GSM/GPRS/EDGE: Quad band, 850/900/1800/1900MHz
GSM class: Small MS
Output power: Class 4 (+33dBm ±2dB) for EGSM850
(as per Release 99) Class 4 (+33dBm ±2dB) for EGSM900
Class 1 (+30dBm ±2dB) for GSM1800
Class 1 (+30dBm ±2dB) for GSM1900
Class E2 (+27dBm ± 3dB) for GSM 850 8-PSK
Class E2 (+27dBm ± 3dB) for GSM 900 8-PSK
Class E2 (+26dBm +3/-4dB) for GSM 1800
8-PSK
Class E2 (+26dBm +3/-4dB) for GSM 1900
8-PSK
Class 3 (+24dBm +1/-3dB) for UMTS 2100,
WCDMA FDD BdI
Class 3 (+24dBm +1/-3dB) for UMTS 1900,
WCDMA FDD BdII
Class 3 (+24dBm +1/-3dB) for UMTS 850,
WCDMA FDD BdV
RoHS: All hardware components fully compliant with EU
RoHS Directive
HSDPA features: 3GPP Release 5, DL 3.6 Mbps, UL 384 kbps
UE CAT. [1-6], 11, 12 supported
UMTS features: 3GPP Release 4, PS data rate - 384 kbps DL / 384
kbps UL
CS data rate - 64 kbps DL / 64 kbps UL
GSM/GPRS/EGPRS features: Data transfer GPRS
 - Multislot Class 10
- Full PBCCH support
- Mobile Station Class B
- Coding Scheme 1 –– 4
EGPRS
- Multislot Class 10
- EDGE E2 power class for 8 PSK
- Downlink coding schemes –– CS 1-4, MCS 1-9
- Uplink coding schemes –– CS 1-4, MCS 1-9
- Uplink coding schemes –– CS 1-4, MCS 1-9
- BEP reporting
- SRB loopback and test mode B
- 8-bit, 11-bit RACH
- PBCCH support
- 1 phase / 2 phase access procedures
- Link adaptation and IR
- NACC, extended UL TBF
- Mobile Station Class B
CSD
- V.110, RLP, non-transparent
- 9.6 kbps
SMS: Point-to-point MT and MO
Text and PDU mode
Audio: Audio speech codecs
Chapter 8: Specifications
Bluetooth

8.2.4 Bluetooth
Embedded (920 kbps serial interface)
Bluetooth Version 2.0 compliant (features Adaptive Frequency
Hopping for better co-existence with 802.11 radio)
Chip Antenna 2dBi peak
Transmit Power -3dBm (0.5mW) minimum, +4dBm (2.5mW) max
Frequency Range 2.400 - 2.4835 GHz
RX Sensitivity -80dBm max
(BER<=0.1%)
Data Rate 732.2 kbps and 57.6 kbps asymmetric,
433.9 kbps symmetric

8.3 Battery Specifications

8.3.1 High-Capacity (Model WA3006)
8.3.1.1 Electrical Specifications

Note: The electrical specifications apply for ambient temperature TAMB of 0° to +40°C
unless otherwise stated.

Item Description Specification Remark

1 Interface Chipset Maxim DS2762 -

2 Rated Voltage 3.7V Typical

3 Rated Capacity 3300mAh Typical

4 Rated Charge Current 1.5A Maximum

5 Charge Voltage 4.2 +/- 0.05V Maximum

6 Discharge Cut-off voltage 2.6V Typical

296 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 8: Specifications
High-Capacity (Model WA3006)

Item Description Specification Remark

7 Discharge Current Constant voltage Current -

limited

8 Discharge Current 0.5C (-20°C to 60°C) Typical

9 Internal Resistance 200 m Maximum

8.3.1.1.1 Battery Pack Electrical Specifications

Description Specification

Minimum Typical Maximum

Over voltage detection voltage 4.325V 4.350V 4.375V

Charge enable 4.10V 4.15V 4.20V

Under voltage detection voltage 2.5V 2.6V 2.7V

Over current detection current - 3.5A -

Short-circuit detection current 5.0A 8.0A 11.0A

Short-circuit detection voltage 150mV 200mV 250mV

Over voltage delay time 0.8s 1s 1.2s

Under voltage delay time 90ms 100ms 110ms

Over current delay time 5ms 10ms 20ms

Short-circuit delay time 160µs 200µs 240µs

Recovery charge current 0.5mA 1mA 2mA

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 297

Chapter 8: Specifications
High-Capacity (Model WA3006)

8.3.1.2 Standard Discharge

Note: Standard charge is defined as charging with constant voltage limit of 4.2V and con-
stant current limit of 0.9A; the termination charge occurs when the current drops to
45mA.
Standard discharge is defined as discharging at a constant current of 350mA until
the battery protection circuit switches the battery output off in over-discharge mode.

Acceptance Test Specifications

Description Condition Test Result

Open circuit voltage After standard charge, measure within 4.15V or more
24 hours.

Internal Resistance After standard charge, measure within 200 m max.

24 hours.

Capacity_1 After standard charge, measure time 110 minutes or more

taken for a fast discharge.

Charge/Discharge Cycle After repeating standard charge and 90 minutes or more

fast discharge, measure the fast dis-
charge time after 300 discharge cycles.

Capacity_2 After standard charge, measure the time 500 minutes or more
taken for a standard discharge.

Over Discharge After standard charge, apply a standard 110 minutes or more
discharge followed by a standby dis-
charge. Then measure capacity after
carrying out standard charge and then a
fast discharge.

Self discharge After a standard charge, keep battery at 100 mins or more
25°C for 30 days. Measure the time
taken for a fast discharge.

298 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 8: Specifications
High-Capacity (Model WA3006)

Description Condition Test Result

Temperature Perform a standard charge and fast dis- 100 mins. @ 0°C
charge at 0°C, 25°C and 40°C and 110 mins. @ 23°C
measured the time taken for a fast dis- 105 mins. @ 40°C
charge at 25°C.

Temp./Humidity Cycle After standard charge, carry out 5 100 minutes or more
cycles of the following: 65°C and 90%
humidity for 8 hrs.
25°C and 65% humidity for 4 hrs.
-20°C for 8 hrs. 25°C and 65% humid-
ity for 4 hrs.
Following that, perform a fast dis-
charge, standard charge and then a fast
discharge. Measure the time taken for
the second discharge.

Dry heat After standard charge, keep the battery 100 minutes or more
at 60°C for 8 hrs. Carry out a fast dis-
charge, standard charge and then a fast
discharge, measured the time taken for
the second discharge.

EMC/CE Testing The battery will need to pass the Test to be performed
requirements of the EMC directive by manufacturer.
89/336/EEC (and amendments) when
fitted into the product:
Emissions to EN55022 Class B (1998)
Immunity to EN55024 (1998)

Electro-Static Discharge EN61000-4-8: No damage

Test A. Contact Discharge: +/-8kV for each
contact pad by 10 times.
B. Air Discharge: +/-15kV for 10 times
(the discharge test point is for around
battery casing.)

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 299

Chapter 8: Specifications
High-Capacity (Model WA3006)

8.3.1.3 Safety Data

Description Condition Test Condition/Result

Short Circuit Test After a standard charge, Protection circuit board to operate.
short terminals and discharge No explosion, fire, smoke or leakage.
for 1 hr.

Over Charging Test After a standard charge, Protection circuit board to operate.
charge continuously at 4.2V No explosion, fire, smoke, or leakage.
and 4A for 8 hrs.

Reverse Charging After a standard discharge, Protection circuit board to operate.

Test reverse-charge continuously No explosion, fire, smoke or leakage.
at 4.2V and 4A for 8hrs.

8.3.1.4 Safety License

Item Licenses Standard

1 UL 1642 The lithium-ion cell has been listed and pass the UL1642 stand-
ard by UL Lab.

2 UL 2054 The battery pack is in the process to apply the UL 2054 battery
standard.

3 89/336 EEC- The battery pack is in the process to apply the below standard:
EMC directive. -EN55022 -LVD 72/23 EEC -EN55024 -EN61326

4 RoHS Direc- The battery pack is in the process to apply the RoHS directive
tive applicable report by SGS Lab.

300 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 8: Specifications
High-Capacity (Model WA3006)

8.3.1.5 Environmental Test

Description Test Reference Test Condition/Result

Drop (mechanical) Drop sample battery on all faces from height of

1.2 meters onto concrete floor.
No explosion, fire, vent, leakage and the open
circuit voltage higher than 3.7V.

Storage at high temp. EN60068-2-2 Test +60°C dry for 240 hours
No explosion, fire, vent or leakage.

Storage at low temp. EN60068-2-1 Test -20°C dry for 240 hours
No explosion, fire, vent or leakage.

Storage at high temp. IEC68-2-3 Test +40°C at 90%RH for 240 hours.
and high humidity No explosion, fire, vent or leakage.

Storage temp. IEC68-2-14 Test +60oC (2C) for 1 hour (T1), -20oC (2C) for 1
cycling hour. 3 minutes Max allowed for change
between T1 and T2.
Cycle 10 times
No explosion, no fire, no vent, and no leakage.

Vibration resistance BS2011 Part 2.1 After standard charge, tested under the follow-
FDC (IEC68-2-37) ing conditions: Random vibration 5Hz-500Hz
ASD 0.02g2/Hz in 3 axis for 15 mins. After
which, carry out a standard discharge, charge,
discharge. No parting joints/cracks or damage to
connectors. No leakage or critical damage.

Impact shock resist- - 3 cycles of 50G 11ms, 1/2 sine pulse accelera-
ance tion applied in 6 directions. 18 shocks total.

ESD protection - Accordance with EN61000-4-8

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 301

Chapter 8: Specifications
Super High-Capacity (Model WA3010)

8.3.2 Super High-Capacity (Model WA3010)

8.3.2.1 Electrical Specifications
Note: The electrical specifications apply for ambient temperature TAMB of 0° to +40°C
unless otherwise stated.

Item Description Specification Remark

1 Interface Chipset Maxim DS2762 -

2 Rated Voltage 3.7V Typical

3 Rated Capacity 4400mAh Typical

4 Rated Charge Current 1.2A Maximum

5 Charge Voltage 4.2 +/- 0.05V Maximum

6 Discharge Cut-Off Voltage 2.6V Typical

7 Charge Method Constant voltage -

Current limited

8 Discharge Current 0.5C (-20°C to 60°C) Typical

9 Internal Resistance 150 m Maximum

10 Charging Temperature 0 to 40 Typical

302 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 8: Specifications
Super High-Capacity (Model WA3010)

Battery Pack Electrical Specifications

Item Description Specification

Minimum Typical Maximum

1 Over voltage detection voltage 4.325V 4.350V 4.375V

2 Charge enable 4.10V 4.15V 4.20V

3 Under voltage detection voltage 2.5V 2.6V 2.7V

4 Over current detection current 2.97A 3.17A 3.36A

5 Short-circuit detection current 9.9A 13.33A 16.83A

6 Short-circuit detection voltage 150mV 200mV 250mV

7 Over voltage delay time 0.8s 1s 1.2s

8 Under voltage delay time 90ms 100ms 110ms

9 Over current delay time 5ms 10ms 20ms

10 Short-circuit delay time 160µs 200µs 240µs

11 Recovery charge current 0.5mA 1mA 2mA

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 303

Chapter 8: Specifications
Super High-Capacity (Model WA3010)

8.3.2.2 Standard Discharge

Note: Standard charge is defined as charging with constant voltage limit of 4.2V and con-
stant current limit of 0.9A; the termination charge occurs when the current drops to
45mA.
Standard discharge is defined as discharging at a constant current of 350mA until the
battery protection circuit switches the battery output off in over-discharge mode.

Acceptance Test Specifications

Description Condition Standard

Open circuit voltage After standard charge, measure 4.15V or more

within 24 hours.

Internal Resistance After standard charge, measure 150 m max.

within 24 hours.

Capacity_1 After standard charge, measure time 110 minutes or more

taken for a fast discharge.

Charge/Discharge Cycle After repeating standard charge and 90 minutes or more

fast discharge, measure the fast dis-
charge time after 300 discharge
cycles.

Capacity_2 After standard charge, measure the 500 minutes or more

time taken for a standard discharge.

Over Discharge After standard charge, apply a stand- 110 minutes or more
ard discharge followed by a standby
discharge. Then measure capacity
after carrying out standard charge and
then a fast discharge.

Self discharge After a standard charge, keep battery 100 mins or more
at 25°C for 30 days. Measure the time
taken for a fast discharge.

304 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 8: Specifications
Super High-Capacity (Model WA3010)

Description Condition Standard

Temperature Perform a standard charge and fast 100 mins. @ 0°C

discharge at 0°C, 25°C and 40°C and 110 mins. @ 23°C
measured the time taken for a fast dis- 105 mins. @ 40°C
charge at 25°C.

Temp./Humidity Cycle After standard charge, carry out 5 100 minutes or more
cycles of the following: 65°C and
90% humidity for 8 hrs.
25°C and 65% humidity for 4 hrs.
-20°C for 8 hrs. 25°C and 65%
humidity for 4 hrs.
Following that, perform a fast dis-
charge, standard charge and then a
fast discharge. Measure the time
taken for the second discharge.

Dry heat After standard charge, keep the 100 minutes or more
battery at 60°C for 8 hrs. Carry out a
fast discharge, standard charge and
then a fast discharge. Measure the
time taken for the second discharge.

EMC/CE Testing The battery will need to pass the Test to be performed
requirements of the EMC directive by manufacturer.
89/336/EEC (and amendments) when
fitted into the product:
Emissions to EN55022 Class B
(1998) Immunity to EN55024 (1998)

Electro-Static Discharge Test EN61000-4-8: No damage

A. Contact Discharge: +/-8kV for
each contact pad by 10 times.
B. Air Discharge: +/-15kV for 10
times (the discharge test point is for
around battery casing.)

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 305

Chapter 8: Specifications
Super High-Capacity (Model WA3010)

8.3.2.3 Safety Data

Description Condition Standard

Short Circuit Test After a standard charge, Protection circuit board to operate.
short terminals and dis- No explosion, fire, smoke, or leakage.
charge for 1 hr.

Over Charging Test After a standard charge, Protection circuit board to operate.
charge continuously at No explosion, fire, smoke, or leakage.
4.2V and 4A for 8 hrs.

Reverse Charging Test After a standard discharge, Protection circuit board to operate.
reverse-charge continu- No explosion, fire, smoke, or leakage.
ously at 4.2V and 4A for
8hrs.

8.3.2.4 Safety License

Item Licenses Standard

1 UL 1642 The lithium-ion cell has been listed and pass the UL1642 stand-
ard by UL Lab. File No. MH12383

2 UL 2054 The battery pack is in the process to apply the UL 2054 battery
standard. File No. MH29921.

3 89/336 EEC- The battery pack is in the process to apply the below standard:
EMC directive -EN55022 -LVD 72/23 EEC -EN55024 -EN61326

4 RoHS Direc- The materials of battery pack are used in accordance with the
tive European RoHS directive.

306 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 8: Specifications
Super High-Capacity (Model WA3010)

8.3.2.5 Environmental Test

Test Refer-
Description ence Test Reference/Results

Drop (mechanical) Drop sample battery on all faces from height of 1.2
meters onto concrete floor.
No explosion, fire, vent, leakage and the open
circuit voltage higher than 3.7V.

Storage at high temp. EN60068-2-2 +60°C dry for 240 hours

Test No explosion, fire, vent or leakage.

Storage at low temp. EN60068-2-1 -20°C dry for 240 hours

Test No explosion, fire, vent or leakage.

Storage at high temp. IEC68-2-3 +40°C at 90%RH for 240 hours.

and high humidity Test No explosion, fire, vent or leakage.

Storage temp. cycling IEC68-2-14 +60°C (2C) for 1 hour (T1), -20oC (2C) for 1 hour.
Test 3 minutes Max allowed for change between T1 and
T2.
Cycle 10 times
No explosion, no fire, no vent, and no leakage.

Vibration resistance BS2011 Part After standard charge, tested under the following
2.1 conditions: Random vibration 5Hz-500Hz ASD
FDC (IEC68- 0.02g2/Hz in 3 axis for 15 mins. After which, carry
2-37) out a standard discharge, charge, discharge. No
parting joints/cracks or damage to connectors. No
leakage or critical damage.

Impact shock resist- - 3 cycles of 50G 11ms, 1/2 sine pulse acceleration
ance applied in 6 directions. 18 shocks total.

ESD protection - Accordance with EN61000-4-8

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 307

Chapter 8: Specifications
Scanner/Imager Model Numbers

8.4 Scanner/Imager Model Numbers

Scanner/Imager Engine Kit Model No. Form Factor

1D Laser SE955 WA9102-G1 End-Cap without GSM
WA9112-G1 End-Cap with GSM
WA9002-G1 Pod
1D Laser SE1223HP WA9000-G1 Pod
1D Laser SE1223LR WA9005-G1 Pod
1D Laser SE1524ER WA9009 End-Cap includes a trigger
back plate so that it can
interface with the Flush
Mount Pistol Grip
(WA6103)
1D Imager EV15 WA9103-G1 End-Cap without GSM
WA9113-G1 End-Cap with GSM
WA9003-G1 Pod
2D Imager SX5400 WA9008 Pod
2D Imager HHP 5180 WA8010-G1 End-Cap without GSM
WA9212-G1 Slim Pod

8.5 Scanner Specifications

8.5.1 SE1223HP, LR And SE955HP Specifications

Scan Engine SE 1223HP SE 1223LR SE 955HP

Scan Angle 42º ± 2º 23º ± 2º 47° ± 3° default /

35° ± 3° reduced
Scan Rate 35 (± 5) 35 (± 5) 104 (± 12)
scans/sec (bi- scans/sec (bi- scans/sec
directional) directional) (bi-directional)

308 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 8: Specifications
SE1223HP, LR And SE955HP Specifications

Scan Engine SE 1223HP SE 1223LR SE 955HP

Scan Pattern Linear Linear Linear

Wavelength 650nm 650nm 650nm
Input Voltage 5.0 VDC ± 10% 5.0 VDC ± 10% 3.0-5.5 VDC ±
10%
Input Current 110 mA typical 115 mA typical 65 mA typical
Standby 130 µA typical 70 µA max. 8 µA max
Current
Operating -40ºC to 60ºC -30º to 55ºC -20° to 60° C
Temperature -40ºF to 140ºF -22ºF to 131ºF -4° to 140° F
Print Contrast Minimum 20% Minimum 40% Minimum 25%
absolute absolute absolute
dark/light reflec- dark/light reflec- dark/light reflec-
tance measured tance measured tance measured at
at 650 nm at 650 nm 650 nm
Dimensions 1.93 cm max. H 1.93 cm max. H 1.21 cm H x 2.16
x 3.84 cm max. x 3.84 cm max. cm W x 1.55 cm
W x 3.51 cm W x 3.51 cm (max)
max. D max. D
0.47 in. H x 0.85
0.76 in. max. H x 0.76 in. max. H x in. W x 0.61 in. D
1.51 in. max. W 1.51 in. max. W (max)
x 1.38 in. max. D x 1.38 in. max. D
Symbologies UPC/EAN, Code UPC/EAN, Code UPC/EAN, Code
128, Code 39, 128, Code 39, 128, Code 39,
Code 93, I 2 of 5, Code 93, I 2 of 5, Code 93, I 2 of 5,
Discrete 2 of 5, Discrete 2 of 5, Discrete 2 of 5,
Codabar, MSI Codabar, MSI Codabar, MSI
UCC/EAN 128, UCC/EAN 128, Plessey
TriOptic Code TriOptic Code 39
39

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 309

Chapter 8: Specifications
SE1223HP, LR And SE955HP Specifications

8.5.1.1 SE 1223HP Decode Zone

4,844 Lux to 86,112 Lux

Minimum Width of Field Maximum Width of Field

Range Range

Mil Size Inches Inches Inches Inches

5 2.75 1.25 7 3
7.5 2.25 1 11 4
10 1.75 0.5 15.75 6
UPC 2 1 22 9
15 2 1 25 10
20 2 1 30 12.5
40 3.75 56 23
55 5 66 25

8.5.1.2 SE 1223LR Decode Zone

4,844 Lux to 86,112 Lux

Minimum Width of Field Maximum Width of Field

Range Range

Mil Size Inches Inches Inches Inches

10 11 2 24 5
15 7.5 1 39 8
20 7.5 1 48 10
40 10 2 90 19
55 10 2 120 24
70 reflective 48 200 40
100 reflective 60 240 48
High quality symbols in normal room light.

310 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 8: Specifications
SE1524ER Scanner Specifications

8.5.1.3 SE 955HP Decode Zone

Decode Zone Typical

4 mil 1.0 in. - 5.5 in. / 2.54 cm - 13.97 cm

5 mil 1.25 in. - 8 in. / 3.18 cm - 20.32 cm
7.5 mil 1.5 in. - 13.25 in. / 3.81 cm - 33.66 cm
10 mil 1.5 in. - 17.5 in. / 3.81 cm - 44.45 cm
UPC 100% 1.5 in. - 23.5 in. / 3.81 cm - 59.69 cm
15 mil 1.5 in. - 29.5 in. / 3.81 cm - 74.93 cm
20 mil 1.75 in. - 35.5 in. / 4.45 cm - 90.17 cm
40 mil * - 40 in. / * - 101.6 cm
55 mil * - 55 in. / * - 139.7 cm
* dependent on width of bar code

8.5.2 SE1524ER Scanner Specifications

Parameter SE1524ER

Light Source Laser @ 650nm

Programmable Parameters Laser on time, Aim duration, Power mode, Trigger mode, Bi-
directional redundancy, Symbology types/lengths, Data format-
ting, Serial parameters, Beeper tone, Scan angle

Scan Angle 13.5° ±0.7º

Scan Pattern Single line

Scan Rate 35 ±5 scans/sec (bi-directional)

Technology Laser

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 311

Chapter 8: Specifications
SE1524ER Scanner Specifications

Parameter SE1524ER

Undecoded Decoded only

Ambient light immunity Artificial: 450 ft. candles (4,844 Lux); Sunlight: 4,000 ft.
candles (86,112 Lux)

Humidity 5% to 95% non-condensing

Operating Current Scanning current: 210 mA typical, 240 mA max.; Motor on cur-
rent: 150 mA typical, 170 mA max.; Standby current: 60 uA

Operating Temperature -22° to 140° F (-30° to 60° C) chassis temperature

Power Supply Voltage Input voltage: 3.3 VDC ±10%

Storage Temperature -40° to 158° F (-40° to 70° C)

312 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 8: Specifications
SE1524ER Scanner Specifications

8.5.2.1 SE1524 Scanner Decode Zone

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 313

Chapter 8: Specifications
EV15 Imager Specifications

8.5.3 EV15 Imager Specifications

Parameter EV15

Light Source 617nm Highly Visible LED

Scan Angle 40º

Minimum Print Contrast Minimum 25%

Min. x Dimension 0.1 mm (4 mils)

Reading Distance Up to 90cm (35 in)

Symbologies UPC (E&A), EAN, RSS, Code 39, Code 128,

UCC/EAN 128, ISBN, ISBT, Interleaved, Matrix,
Industrial and Standard 2 of 5, Codabar, Code 93/93i,
Code 11, MSI, Plessey, Telepen, PDF417, Micro
PDF417

Ambient Light Works in any lighting conditions, from 0 to 100,000 lux

Shock 2000G, 0.7ms, half sinus, 3 axes

Vibration 50G r.m.s

314 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 8: Specifications
SX5400* Imager

8.5.3.1 EV15 Imager Decode Zone

0 Lux to 100,000 Lux

Minimum Range Maximum Range

Mil Size Inches Inches

5 2.5 7
10 3 14

UPC 2 14.5

20 2.5 22
40 3 35.5
20 2.5 22
High quality symbols in normal room light.

8.5.4 SX5400* Imager

Specification SX5400
Optical resolution 752H x 480V
Field of view at 160mm 120mm (H) x 78mm (V)
41.1° (H) x 27.4° (V)
Pitch angle ±45°
Skew angle ±45°
Ambient light 0 to 100,000 lux (full sunlight)
300 lux nominal
Minimum contrast 10%
Targeting Intuitive range finding 626 nm LED
Self illumination Red LED (standard)
Supply voltage 5 V ± 10%

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 315

Chapter 8: Specifications
SX5400* Imager

Power supply 3.6 Volt DC nominal (2.7 - 5 Volts DC)

Connectivity USB 1.1 or serial async
Connector to the interface Molex 52892-1295 or HiRose FH12-12S-.5SH
board
Symbologies supported Code 39; Code 39 Full ASCII; UPC-A,-A2, -A5; UPC-E, -E2, -
E5; EAN-8 -13; JAN;I2of5; Code 128; Codabar/NW7; RSS 14,
RSS Limited, RSS Expanded, RSS 14 Truncated, PDF417,
microPDF417; Composite, CC-A, CC-B, CC-C; image capture,
Data Matrix; QR Code; Maxicode; Aztec Code; Planet; Postnet;
Royal Mail 4SCC; 4 State postal codes from Australia, Canada,
Japan; Korean Post 3of5.
*Formerly known as Symagery SX5400.

8.5.4.1 SX5400 Imager Performance

The table below presents the typical performance of the SX5400 Imager at 300 lux
(@ 160mm focus when using Grade A photographic-quality bar codes). Listed are the
average near, far, and Depth of Reading (DOR) numbers.

Near Avg. Far Avg. DOR Avg.

Symbology Size (mil)
(inches) (inches) (inches)
C39 7.5 4.0 7.0 3.0
C39 10 2.75 9.25 6.5
C39 15 2.25 11.0 8.75
PDF6.6 6.6 4.0 6.5 2.5
PDF10 10 3.25 9.0 5.75
PDF15 15 2.25 10.75 8.5
DM15 15 3.0 8.0 5.0
QR15 15 3.75 7.5 3.75
UPC 12.5 3.0 9.5 6.5

316 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Chapter 8: Specifications
HHP5180 Imager

8.5.5 HHP5180 Imager

Parameter HHP5180
Image Sensor 752 X 480 CMOS sensor
Motion Tolerance 4 in. (10.2cm) per second
Rotational Sensitivity 360°
Viewing Angle ±40°
Ambient Light Total darkness to 100,000 lux (full sunlight)
Illumination LEDs 626nm ±30nm
Aiming: LEDs: 526nm ±30nm
Laser: 650nm ±10nm
Symbologies supported 2D: PDF417, MicroPDF417, MaxiCode, Data Matrix,
QR Code, Aztec, Aztec Mesa, Code 49, UCC
Composite
Linear: Code 39, Code 128, Codabar, UPC, EAN, In-
terleaved 2 of 5, RSS, Code 93, Codablock
Postal: Postnet (US), Planet Code, BPO 4 State, Cana-
dian Post, Japanese Post, KIX (Netherlands) Post
Size 1.78cm Depth x 2.79cm Width (without mounting tabs)
x 1.21cm Height
0.7 in. Depth x 1.1 in. Width (without mounting tabs) x
0.475 in. Height
Weight 5.9 grams (.21 ounces)
Operational Input Voltage: Imager: 3.3 VDC ±5% (23°C)
Illumination + Aimer 5300: 3.0 VDC to 5.5 VDC
(23°C)
Current Draw: Imager: Operating Current –– 100 mA
Standby Current: 100 µA
Operating Temperature -30° to +50°C (-34° to 122°F)
Storage Temperature -40° to +70°C (-40° to 158°F)
Humidity up to 95% RH, non-condensing at 122° F (50°C)

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual 317

Chapter 8: Specifications
HHP5180 Imager

Parameter HHP5180
Shock 18 shocks of 3,500 G for 0.5 msec at 23°C (73° F)

8.5.5.1 HHP5180 Imager Decode

Performance

Focal Point

SR 7 inches (17.8 cm) from lens plate

SF 4.5 inches (11.4 cm) from lens plate

8.3 mil 10 mil 15 mil Data 35 mil

SF Working 13 mil UPC 15 mil QR
Range* Linear PDF417 (.033 cm) Matrix (.038 cm) Maxicode
(.020 cm) (.025 cm) (.038 cm)6 (.089 cm)

3.5 in. 3.1 in. 2.1 in. 2.3 in. 2.1 in. 2.0 in.
Near
(8.9 cm) (7.9 cm) (5.3cm) (5.8 cm) (7.9 cm) (5.1 cm)

7.6 in. 9 in. 13.2 in. 10.2 in. 8.8 in. 13.0 in.
Far
(19.3cm) (22.9 cm) (33.5 cm (25.9 cm) (22.4 cm) (33 cm)

6.6 mil 7.5 mil 8.3 mil Data 10 mil

SF Working PDF417 Linear Matrix 8.3 mil QR Linear 13 mil UPC
Range* (.021 cm)6 (.033 cm)
(.017 cm) (.019 cm) (.021 cm) (.025 cm)

2.8 in. 2.5 in. 3.4 in. 3.4 in. 2.2 in. 2.0 in.
Near
(7.1cm) (6.4cm) (8.6cm) (8.6cm)) (5.6cm) (5.1cm)

6 in. 6.5 in. 5.7 in. 5.4 in. 7.6 in. 8.9 in.
Far
(15.2cm) (16.5cm (14.5cm) (13.7cm) (19.3cm) (22.6cm)

*Data characterized at 23°C and 0 lux ambient light.

318 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 APPENDIX A
SUMMIT CLIENT UTILITY (SCU)
This appendix provides details about each tab in the Summit Client Utility (SCU).
For quick setup instructions for the 802.11b/g Summit radio using the Summit
Client Utility (SCU), refer to ““Setting Up a RA2041 Radio––Summit Client Util-
ity”” on page 16.

A.1 SCU Tabs

This section provides a detailed description of each of the tabs available in the
SCU –– Main, Profile, Status, Diags and Global.

A.2 Main Tab

The Main tab is displayed when you tap on the Start>Programs>SCU icon.

•• Enable/Disable Radio: Enables or disables the radio. This is a toggle button;

when the radio is enabled, this button reads Disable Radio and when the radio
is disabled, the button reads Enable Radio.
•• Active Profile: Lists the name(s) of the active configuration profile(s). When
a profile is chosen from the Active profile drop-down menu, the settings for
that profile become active.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual A-1

 Appendix A: Summit Client Utility (SCU)
Profile Tab

If ThirdPartyConfig is selected, after the WORKABOUT PRO3 goes through a power

cycle, WZC is used for configuration of the radio. See ““ThirdPartyConfig”” on page A-6
for details.
•• Radio Type: Indicates the type of radio installed in the device, e.g. ““BG”” when an
802.11b/g radio is installed.
•• Reg. Domain: Indicates the regulatory domain (e.g. ETSI, FCC or TELEC) for which
the radio is configured. ““Worldwide”” means that the radio can be used in any domain.
•• Status: Indicates if the radio is associated to an access point. If this is not the case,
Association Status indicates the radio status.
•• Driver and SCU: These fields display the version of the device driver and the SCU that
are running on the WORKABOUT PRO3.
•• About SCU: This box provides details about the SCU software.

A.3 Profile Tab

The Profile tab allows you to define radio and security settings that are stored in the registry
as part of the configuration profile.
The profile you create and save is listed in the Active Profile drop-down menu in the Main
tab. You can define up to 20 profiles.

Radio
Attributes

•• Edit Profile: Used to choose the profile to be viewed or edited. If ThirdPartyConfig is

chosen, after the WORKABOUT PRO3 goes through a power cycle, WZC is used for
configuration of the radio.
•• New: Allows you to create a new profile with default settings and assign it a name.
•• Rename: Allows you to assign a profile name.

A-2 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix A: Summit Client Utility (SCU)
Profile Tab

•• Delete: Deletes the profile unless it is currently active.

•• Scan: Opens a new window which displays a list of available access points with their
respective SSIDs, Signal Strength (RSSI value) and Security Status. Selecting an AP
returns you to the profile page and populates a new profile with the information availa-
ble from the scan to simplify setting up a new profile.
•• Radio: Lists radio attributes. These attributes can be individually chosen from this
menu. When an attribute is chosen, an associated list of options is displayed where you
can assign new settings or view existing settings.
•• Commit: Saves all changes.
The following table describes the options in the Radio Attributes drop-down menu:

Radio
Description Value Default
Attribute
SSID Service set identifier (SSID) for Maximum of 32 characters. None
WLAN to which the radio
connects.
Client Name assigned to radio & Maximum of 16 characters. None
Name WORKABOUT PRO3 into
which it is installed.
Power Save Power save mode for radio. CAM: Constantly awake. Fast
Maximum: Maximum power
savings.
Fast: Fast power save mode.
Tx Power Maximum transmit power. Max: Maximum defined for Max
current regulatory domain.
Measured in mW: 50,30,10, 1.
Bit Rate Used by radio when interacting Auto: Rate automatically nego- Auto
with WLAN access point. tiated with access point.
Rates in Mbps: 1, 2, 5.5, 6.9 11,
12, 18, 24, 36, 48, 54.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual A-3

 Appendix A: Summit Client Utility (SCU)
SCU Security Capabilities

Radio
Description Value Default
Attribute
Radio Used by 802.11g when interact- B rates only: 1, 2, 5.5, & 11 BG rates
Mode ing with access point. Mbps. optimized
G rates only: 6, 9, 12, 18, 24,
36, 48, and 54 Mbps.
BG rates full: All B and G rates.
BG rates optimized: 1, 2, 5.5, 6,
11, 24, 36 & 54 Mbps.
Auth Type 802.11 authentication type used Open, shared-key, or LEAP (Net- Open
when associating with access point. work-EAP).
EAP Type Extensible Authentication Protocol None, LEAP, EAP-FAST, PEAP- None
type used for 802.1X authentica- MSCHAP
tion to access point. –– To use EAP-TLS, you must
use WZC.
Credentials Authentication credentials for the User: Username or Domain/User- None
selected EAP type. name (up to 64 characters).
Refer to ““EAP Credentials”” on Password: up to 64 characters.
page A-6. For PEAP: CA Cert––CA server
certificate filename.
Encryption Type of encryption used to protect None, Manual WEP, Auto WEP None
transmitted data. (generated during EAP authenti-
cation), WPA PSK, WPA TKIP,
WPA2 PSK, WPA2 TKIP, WPA2
AES, CCKM TKIP.
For Manual WEP: Up to four
static WEP keys.
For PSK: ASCII passphrase or
hex PSK.

•• EAP-Type & Encryption: Security settings. These settings allow you to enhance the
security of data across the wireless LAN. Refer to ““EAP Credentials”” on page A-6 and
““SCU Security Capabilities”” on page A-4 for details about these settings.

A.3.1 SCU Security Capabilities

The SCU provides integrated security to protect transmitted data as well as the hand-held
computer and wireless WAN infrastructure that transmit and receive data.

A-4 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix A: Summit Client Utility (SCU)
SCU Security Capabilities

A foundational element of the IEEE 802.11i WLAN security standard is IEEE 802.1X and a
critical application on a mobile device is an 802.1X supplicant. This supplicant provides an
interface between the radio and the operating system and supports the authentication and en-
cryption elements required for 802.11i, also known as Wi-Fi Protected Access 2 (WPA2), as
well as predecessors such as WPA and WEP. Summit software includes an integrated suppli-
cant that supports a broad range of security capabilities, including:
•• 802.1X authentication using pre-shared keys or an EAP type, required for WPA2
and WPA.
•• Data encryption and decryption using WPA2 AES, WPA TKIP or WEP.
Common EAP types include:
•• EAP-TLS: Uses the same technology as a follow-on to Secure Socket Layer (SSL). It
provides strong security, but relies on client certificates for user authentication.
•• PEAP: Provides secure user authentication by using a TLS tunnel to encrypt EAP traf-
fic. Two different inner methods are used with PEAP:
•• EAP-MSCHAPV2, resulting in PEAP-MSCHAP: This is appropriate for use against
Windows Active Directory and domains.
•• EAP-GTC, resulting in PEAP-GTC: This is for authentication with one-time passwords
(OTPs) against OTP data bases such as SecureID.
•• LEAP: Is an authentication method for use with Cisco WLAN access points. LEAP
does not require the use of server or client certificates. LEAP supports Windows Active
Directory and domains but requires the use of strong passwords to avoid vulnerability to
off-line dictionary attacks.
•• EAP-FAST: Is a successor to LEAP and does not require strong passwords to protect
against off-line dictionary attacks. Like LEAP, EAP-FAST does not require the use of
server or client certificates and supports Windows Active Directory and domains.

Note: PEAP and EAP-TLS require the use of Windows facilities for the configuration
of digital certificates.
SCU EAP Types
The following EAP types are supported by the integrated supplicant and can be configured
in SCU: PEAP-MSCHAP, PEAP-GTC, LEAP and EAP-FAST. With each of these four
types, if authentication credentials are not stored in the profile, you will be prompted to enter
credentials the first time the radio attempts to associate to an access point that supports
802.1X (EAP).
Consider the following when configuring one of the EAP types:
•• PEAP-GTC: SCU supports static (login) passwords only.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual A-5

 Appendix A: Summit Client Utility (SCU)
EAP Credentials

•• LEAP: Strong passwords are recommended.

•• EAP-FAST: SCU supports automatic, not manual, PAC provisioning.
EAP-TLS will work with a 802.11b/g radio module when Windows Zero Config (WZC)
rather than the SCU is used to configure the type. With WZC, the native Windows suppli-
cant instead of the SCU integrated supplicant is used.

A.3.2 EAP Credentials

Keep the following in mind when defining security settings:
•• If the credentials specified in the profile are incorrect and that profile is used, the
authentication fails without an error message; you will not be prompted to enter
correct credentials.
•• If the credentials are not specified in the profile, when the radio tries to associate using
that profile, you will be prompted to enter the credentials.
•• When prompted, you can enter valid credentials, enter invalid credentials, or cancel
the operation.
•• If you enter valid credentials and tap OK, the radio will associate and authenticate.
•• If you enter invalid credentials and tap OK, the radio will associate but will not authen-
ticate; you will be prompted again to enter credentials.
•• If you tap Cancel or clear the credentials fields and tap OK, the radio will not attempt to
associate with that profile until you perform one of the following actions (while the
profile is the Active Profile):
- Cause the WORKABOUT PRO3 to go through a power cycle or suspend/resume.
- Disable and enable the radio, or tap the Reconnect button on the Diags windows.
- Modify the profile, and tap on Commit.
Alternatively, you can choose another profile as the active profile and then switch back to
the profile for which EAP authentication was cancelled.

A.3.3 ThirdPartyConfig
If you choose to configure ThirdPartyConfig, the SCU will work with the operating sys-
tem’’s Windows Zero Config (WZC) to configure radio and security settings for the CF radio
installed in the unit.
Choosing this profile means that WZC must be used to define the following radio and secu-
rity options: SSID, Auth Type, EAP Type and Encryption. The SCU settings for
ThirdPartyConfig include: Client Name, Power Save, Tx Power, Bit Rate and Radio Mode.

A-6 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix A: Summit Client Utility (SCU)
Status Tab

These SCU settings along with SCU global settings and the WZC settings will be applied to
the radio module.

A.4 Status Tab

The Status tab provides status information including IP address and MAC address for the
client radio, IP address and MAC address for the AP, signal strength, channel, transmit
power and data rate.

A.5 Diags Tab

Ping Address

Ping Results

Use the Diags tab as a troubleshooting tool. The functions are as follows:

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual A-7

 Appendix A: Summit Client Utility (SCU)
Global Settings Tab

•• (Re)connect: Enables/Disables the radio, applies/reapplies current profile and tries to

associate and authenticate to the wireless LAN, logging all activity in the output area at
bottom of the dialog box.
•• Release/Renew: Obtains a new IP address through DHCP and logs all activity in the
output area.
•• Start Ping/Stop Ping: Starts a continuous ping to the address in the text box next to this
button. This a toggle button so when you tap on it, it changes to Stop Ping. Closing this
window or tapping on another button also stops the ping.
•• Diagnostics: Attempts to connect or reconnect to an AP, and provides a more detailed
dump of data than if you used (Re)connect. The dump includes the radio state, profile
settings, global settings and BSSID list of APs. The SCU is saved to a file called
_sdc_diag.txt in the Windows directory.

A.6 Global Settings Tab

The Global settings tab allows you to define radio and security settings that apply to all pro-
files, along with settings that apply specifically to the SCU.

A-8 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix A: Summit Client Utility (SCU)
Global Settings Tab

The Global settings in the table below can be edited in the SCU:

Global Setting Description Value Default

Roam Trigger If RSSI from AP is less than roam dBm: -50, -55, -60, -65, -75
trigger value, radio performs roam scan -70, -75, Custom
or probes for an AP with stronger
signal.
Roam Delta Amount by which second AP’’s RSSI dBm: 5, 10, 15, 20, 25, 10
must exceed the moving average RSSI 30, 35, Custom
for the current AP before the radio will
attempt to roam to a second AP.
Roam Period Following an association or roam scan Seconds: 5, 10, 15, 20, 10
(with no roam), the number of seconds 25, 30, 35, 40, 45, 50,
the radio collects RSSI scan data before 55, 60, Custom
considering roaming.
BG Channel Set Defines the 2.4 GHz channels to be Full (all channels) Full
scanned when the radio is set to roam 1, 6, 11
and needs to determine what APs are
available. 1, 7, 13
Custom
DFS Channels Reserved Off, On Off
Aggressive Scan When this setting is On and the current Off, On On
connection to an AP becomes unrelia-
ble, the radio scans for available APs
more aggressively. Aggressive scan-
ning complements and works in con-
junction with the standard scanning
that is configured through the Roam
Trigger, Roam Delta, and Roam Period
settings. It is recommended that
Aggressive Scan is left On unless there
is significant co-channel interference
because of overlapping coverage from
APs on the same channel.
CCX features Activates three CCX features: AP- Optimized, Full, Off Optimized
assisted roaming, AP-specified
maximum transmit power and
radio management.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual A-9

 Appendix A: Summit Client Utility (SCU)
Global Settings Tab

Global Setting Description Value Default

WMM Use Wi-Fi Multimedia Extensions, also On, Off Off
know as WMM.
TX Diversity Defines how to handle antenna diver- -Main only: Use main Main only
sity when transmitting data to AP. antenna only.
-Aux only: Use auxil-
iary antenna only.
-On: Use diversity.
RX Diversity Defines how to handle antenna diver- -On-Start on Main: On On-Start on
sity when receiving data from AP. startup, use main Main
antenna.
-On-Start on Aux: On
startup, use auxiliary
antenna.
-Main only: Use main
antenna only.
-Aux only: Use auxil-
iary antenna only.
Frag Thresh Packet is fragmented when packet Integer from 256 to 2346
size (in bytes) exceeds threshold. 2346.
RTS Thresh Packet size above which RTS/CTS is An integer from 0 to 2347
required on link. 2347.
LED Available only with MCF10G. On, Off Off
Tray Icon Enables the System Tray icon. Off, On Off
Hide Passwords On - SCU as well as EAP authenti- On, Off Off
cation dialog boxes hide passwords,
WEP keys and other sensitive
information.
Admin Password that must be specified A string of up to 64 SUMMIT
Password when Admin Login button is characters.
pressed.

A-10 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix A: Summit Client Utility (SCU)
Global Settings Tab

Global Setting Description Value Default

Auth Timeout Specifies the number of seconds that An integer from 3 to 60. 8
the software will wait for an EAP
authentication request to succeed or
fail. If authentication credentials are
specified in the active profile and the
authentication times out, then associa-
tion will fail. If authentication creden-
tials are not specified in the active
profile and the authentication times out,
then the user will be re-prompted to
enter authentication credentials.
Certs Path Directory where certificates for EAP Valid directory path up Dependent
authentication are stored. to 64 characters. on device.
Ping Payload Amount of data to be transmitted on a Bytes: 32, 64, 128, 256, 32
ping. 512, 1024
Ping Timeout ms Amount of time in milliseconds that Integer from 0 to 5000
passes without a response before ping 30000.
request is considered a failure.
Ping Delay ms Amount of time in milliseconds Integer from 0 to 1000
between successive ping requests. 7200000.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual A-11

 APPENDIX B
PORT PINOUTS
B.1 LIF (Low Insertion Force) Port Pinout

PIN # Signal Name

1 Ground

2 Ground

3 USB Host Data Plus, For connecting USB devices

4 USB Host Data Minus, For connecting USB devices

5 USB Host Power, for powering USB devices (5V, 100mA Max)

6 DC Power in, for supplying power to WORKABOUT PRO3 /

charging battery (5V, 3A)

7 DC Power in, for supplying power to WORKABOUT PRO3 /

charging battery (5V, 3A)

8 LIF Detect, determines if a device is attached to the LIF

9 USB Device Data Minus, for operating the WORKABOUT PRO3

as a USB device

10 USB Device Data Plus, for operating the WORKABOUT PRO3

as a USB device

11 Ground

12 Ground

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual B-1

 Appendix B: Port Pinouts
Tether Port Pinout

B.2 Tether Port Pinout

PIN # Signal Name

1 Ground

2 USB Data Plus (can be configured as Host or Device)

3 USB Data Minus (can be configured as Host or Device)

4 USB VBUS (can provide 5V, 100mA Max for powering USB Devices)

5 RS232 Tx data

6 RS232 Rx Data

7 Tether detect resistor ID. Determines what kind of device is attached to

the Tether port

8 DC Power In

9 DC Power In

10 DC Power In

11 RS232 CTS

12 RS232 RTS

13 RS232 DSR

14 RS232 DTR

15 RS232 DCD

16 RS232 RI

17 Ground

18 Ground

B-2 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix B: Port Pinouts
Battery Contact Pinout –– WA3006 & WA3010

PIN # Signal Name

19 Ground

20 Ground

B.3 Battery Contact Pinout –– WA3006 & WA3010

PIN # Signal Name Function

1 P- Power Pin for Battery Pack Negative

2 DQ Maxim DS2762 Data

3 TH (GND) Ground

4 P+ Power Pin for Battery Pack Positive

5 PS Power Switch Sensor

- Plastic Rip -

6 P- Power Pin for Battery Pack Negative

B.4 Positive Female Battery Connector

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual B-3

 APPENDIX C
TEKLOGIX IMAGERS APPLET
The Teklogix Imagers applet is used to create, modify, delete and activate imager
settings. The principle uses of the applet are to decode bar codes and to capture
images. A Demonstration Application is provided to demonstrates how the imager
works. Refer to ““PTSI Imager Demo”” on page 101 for details.

C.1 Required Applets

In order to configure imaging, the Manage Triggers and Teklogix Scanners
applets must be present in the Settings>System tab along with the Teklogix
Imagers applet.

C.2 Presets
There are two methods that can be used to configure an imager using the Teklogix
Imagers applet:
•• Use a predefined preset.
•• Create a custom preset based on a predefined preset.

Important: It is strongly recommended that a predefined preset is used

whenever possible. Each predefined preset contains a coherent
group of settings that are known to work together in the intended
environment. In almost all situations, at least one of the prede-
fined presets results in a satisfactory outcome.

A preset is a group of exposure and image correction settings. Each preset config-
ures the imager for a specific purpose such as bar code decoding or image capture.
Presets also allow easier and faster configuration of the imager after power-on or
resume from suspend.
The predefined presets are generic and satisfy most user requirements. A custom
preset can be created for a specific user application, such as: include only
specified bar codes, read only a specified number of bar codes or for reading
unusual media.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual C-1

 Appendix C: Teklogix Imagers Applet
Predefined Presets

Every preset belongs to a preset type. The following preset types are available:
•• Imaging for photo capture.
•• Imaging for bar code decoding.
•• Symbology selection.
At any time, only one preset of each type can be designated as the user-selected
active preset.

C.2.1 Predefined Presets

Predefined presets are built into the imaging software and cannot be changed. The pre-
defined presets allow you to use the imager to perform specified tasks without having to
understand and set numerous variables. In almost all cases these predefined presets
are sufficient.

C.2.2 Bar Code Predefined Presets

These presets encompass the majority of the most popular bar codes and their subtypes. The
bar code decoding symbology predefined presets define which bar codes can be decoded.
The bar code decoding camera predefined presets determine how the bar code images
are captured

C.2.2.1 Bar Code Decoding Symbology Predefined Presets

The following presets select groups of similar bar codes for decoding.

Note: It is recommended that the default preset be used whenever possible.

Factory Default
This preset enables the decoding of frequently used bar codes.
My Default
This preset is synchronized with the Teklogix Scanners applet and contains all the symbolo-
gies selected using the Teklogix Scanner applet. For details on this synchronization see,
““Configuring Symbologies in the Teklogix Imagers Applet”” on page C-16.
All
This preset enables the decoding of all bar codes that the imager can decode.

C-2 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix C: Teklogix Imagers Applet
Bar Code Decoding Camera Predefined Presets

Linear
This preset enables the decoding of all the 1D symbologies that the imager can decode.
Linear and PDF417
This preset enables the decoding of all the 1D and PDF symbologies that the imager can
decode.
Matrix
This preset enables the decoding of all 2 D symbologies that the imager can decode.
Postal
This preset enables the decoding of all the postal symbologies that the imager can decode.

C.2.3 Bar Code Decoding Camera Predefined Presets

The following presets enable successful bar code image capture in almost all conditions.

Note: It is recommended that the default preset be used whenever possible.

Default
This preset works in a wide range of conditions. It is optimized for a normal office lighting
(about 300 Lux).
Low light
This preset is designed for very dark conditions such as inside a warehouse where the lights
are kept low, or inside an unlit truck. This preset increases either the exposure time or the
gain.
Low power
This preset minimizes the use of the flash so as to conserve the battery power on the hand-
held.
Glossy surface
This preset minimizes the use of the flash so as to reduce reflection. This preset is used to
read bar codes that are behind glass, or inside the plastic window of an envelope.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual C-3

 Appendix C: Teklogix Imagers Applet
Image Capture Predefined Presets

C.2.4 Image Capture Predefined Presets

The following presets enable successful image capture in almost all conditions.

Note: It is recommended that the default preset be used whenever possible.

Default
This preset works in a wide range of conditions. It is optimized for a normal office lighting
(about 300 Lux).
Motion
This preset uses a shorter exposure time so as to freeze motion.
Low light near
This preset is designed for dark conditions, it uses a longer exposure time and includes
the flash.

C.3 Using The Teklogix Imagers Applet

C.3.1 Configuring The Image Capture Presets
To configure the image capture presets, open the dialog box as follows:
•• Tap on Start>Settings>System tab.
•• Tap on the Teklogix Imagers icon, and if it’’s not already selected, tap on the
Imaging tab.

C-4 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix C: Teklogix Imagers Applet
Selecting A Camera

The following screen is displayed:

Figure C.1 Imaging Tab

This window lists all the presets, both predefined and custom. Presets are identified
as follows:
•• Predefined presets are marked as read-only.
•• Custom presets are marked as read and write.
•• One preset –– either predefined or custom –– is marked as active.

C.3.2 Selecting A Camera

If your WORKABOUT has more than one built-in camera, one camera must be selected for
configuration. To select a camera:
•• Tap on the Camera Presets drop-down menu to view the camera options.
•• Choose a camera –– specifically, Front Imager which is located at the top of the unit.

C.3.3 Setting The Active Preset

An active preset has an A to the right; in Figure C.1 on page C-5, the active preset is Low
light near. To set an active preset:
•• Highlight the preset, and tap on the Activate button.

C.3.4 Viewing A Preset

To view the parameter settings in a preset:
•• Highlight a preset, and tap on the View button.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual C-5

 Appendix C: Teklogix Imagers Applet
Creating A Custom Preset

The associated preset window is displayed.

•• Tap on the + sign to expand the lists so that you can view the parameter settings.

C.3.5 Creating A Custom Preset

A new custom preset is created by modifying a preset –– either a predefined preset or an ex-
isting custom preset. To create a custom preset:
•• Highlight a preset, and tap on the Add button.
In this example, the Low light near preset was chosen. A screen like the sample below
is displayed.

•• Type the name of the new preset in the dialog box.

•• Tap on OK to save your changes.

C-6 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix C: Teklogix Imagers Applet
Modifying A Custom Preset

The preset list is displayed; the new custom preset appears at the end of the list. It is marked
as read and write.

C.3.6 Modifying A Custom Preset

The parameter values in a custom preset can be modified. It is recommended that very few
changes be made to a custom preset. To ensure that it will work reliably, it should be as close
as possible to the original predefined preset. To change a parameter value:
•• Highlight the custom preset, and tap on the Edit button.

•• Tap on the + symbols to expand the lists so that you can view the parameter settings.
•• Scroll through the parameter list until you reach the parameter that you want to change.
•• For a parameter that can take a range of values:

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual C-7

 Appendix C: Teklogix Imagers Applet
Removing A Custom Preset

- Highlight the parameter, and then press the [SPACE] key or double-click
the parameter.
- An associated dialog box containing the valid range of values for the parameter and
the current setting like the sample screen following is displayed.

- Type a value in the field provided.

•• For a parameter that toggles between two values such as on or off and enabled or
disabled:
- Highlight the parameter and then press the [SPACE] key, or double-click on the
parameter. Either method toggles between the two available values.
•• When you’’ve completed your edits, tap on OK.
The parameter list is displayed; the new value for the changed parameter is shown.
•• Tap on OK to exit to the preset list and save the changes.

C.3.7 Removing A Custom Preset

•• Highlight the custom preset you want to delete, and tap on the Remove button.
A window is displayed warning you that you are about to remove a preset.
•• Tap on Yes to remove the preset or No to cancel the operation.

C.4 Configuring The Bar Code Decoding Camera Presets

To configure the bar code decoding camera presets:
•• Tap on Start>Settings>System tab.
•• Tap on the Barcoding tab.

C-8 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix C: Teklogix Imagers Applet
Selecting A Camera

Figure C.2 Bar Code Presets

This window lists all the presets, both predefined and the custom. Presets are identified as
follows:
•• Predefined presets are marked as read-only. For a description, review ““Predefined Pre-
sets”” on page C-2.
•• Custom presets are marked as read and write.
•• One preset –– either predefined or custom –– is marked as active.

Note: The top portion of the window displays the bar code decoding camera presets.

The top port of the window displays the bar code decoding camera presets.

C.4.1 Selecting A Camera

If your WORKABOUT has more than one built-in camera, one camera must be selected for
configuration. To select a camera:
•• Tap on the Camera Presets drop-down menu to view the camera options.
•• Choose a camera –– specifically, Front Imager which is located at the top of the unit.

C.4.2 Setting The Active Preset

An active preset has an A to the right; in Figure C.2 on page page C-9, the active preset is
Defaults. To set an active preset:
•• Highlight the preset, and tap on the Activate button.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual C-9

 Appendix C: Teklogix Imagers Applet
Viewing A Preset

C.4.3 Viewing A Preset

To view the parameter settings in a preset:
•• Highlight a preset, and tap on the View button.
The associated preset window is displayed.

•• Tap on the + sign to expand one of the lists so that you can view the parameter settings.

C.4.4 Creating A Custom Preset

A new custom preset is created by modifying a preset –– either a predefined preset or an ex-
isting custom preset. To create a custom preset:
•• Highlight a preset, and tap on the Add button.
A screen like the sample following is displayed.

C-10 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix C: Teklogix Imagers Applet
Modifying A Custom Preset

•• Type the name of the new preset in the dialog box.

•• Tap on OK to save your changes.
The preset list is displayed; the new custom preset appears at the end of the list. It is marked
as read and write.

C.4.5 Modifying A Custom Preset

The parameter values in a custom preset can be modified. It is recommended that very few
changes be made to a custom preset. To ensure that it will work reliably, it should be as close
as possible to the original predefined preset. To change a parameter value:
•• Highlight the custom preset, and tap on the Edit button.

•• Tap on the + symbols to expand the lists and view the parameter settings.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual C-11

 Appendix C: Teklogix Imagers Applet
Removing A Custom Preset

•• Scroll through the parameter list until you reach the parameter that you want to change.
•• For a parameter that can take a range of values:
- Highlight the parameter, and then press the [SPACE] key or double-click the
parameter.
- An associated dialog box containing the valid range of values for the parameter and
the current setting like the sample screen following is displayed.

- Type a value in the field provided.

•• For a parameter that toggles between two values such as on or off and enabled or
disabled:
- Highlight the parameter and then press the [SPACE] key, or double-click on the
parameter. Either method toggles between the two available values.
•• When you’’ve completed your edits, tap on OK.
The parameter list is displayed; the new value for the changed parameter is shown.
•• Tap on OK to exit to the preset list and save the changes.

C.4.6 Removing A Custom Preset

•• Highlight the custom preset you want to delete, and tap on the Remove button.
A window is displayed warning you that you are about to remove a preset.
•• Tap on Yes to remove the preset or No to cancel the operation.

C.4.7 Configuring The Bar Code Decoding Symbologies

To configure the bar code decoding camera presets:

C-12 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix C: Teklogix Imagers Applet
Setting The Active Preset

•• Tap on Start>Settings>System tab.

•• Tap on the Barcoding tab.
Figure C.3 Viewing Bar Code Decoding Symbologies

C.4.8 Setting The Active Preset

An active preset has an A to the right; in Figure C.2 on page page C-9, the active preset is
Defaults. To set an active preset:
•• Highlight the preset, and tap on the Activate button.

C.4.9 Viewing A Preset

To view the parameter settings in a preset:
•• Highlight a preset, and tap on the View button.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual C-13

 Appendix C: Teklogix Imagers Applet
Creating A Custom Preset

The associated preset window is displayed.

•• Tap on the + sign to expand one of the lists so that you can view the parameter settings.

C.4.10 Creating A Custom Preset

A new custom preset is created by modifying a preset –– either a predefined preset or an ex-
isting custom preset. To create a custom preset:
•• Highlight a preset, and tap on the Add button.
A screen like the sample following is displayed.

•• Type the name of the new preset in the dialog box.

•• Tap on OK to save your changes.

C-14 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix C: Teklogix Imagers Applet
Modifying A Custom Preset

The preset list is displayed; the new custom preset appears at the end of the list. It is marked
as read and write.

C.4.11 Modifying A Custom Preset

The parameter values in a custom preset can be modified. It is recommended that very few
changes be made to a custom preset. To ensure that it will work reliably, it should be as close
as possible to the original predefined preset. To change a parameter value:
•• Highlight the custom preset, and tap on the Edit button.

•• Tap on the + symbols to expand the lists and view the parameter settings.
•• Scroll through the parameter list until you reach the parameter that you want to change.
•• For a parameter that can take a range of values:

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual C-15

 Appendix C: Teklogix Imagers Applet
Removing A Custom Preset

- Highlight the parameter, and then press the [SPACE] key or double-click the
parameter.
- An associated dialog box containing the valid range of values for the parameter and
the current setting like the sample screen following is displayed.

- Type a value in the field provided.

•• For a parameter that toggles between two values such as on or off and enabled or
disabled:
- Highlight the parameter and then press the [SPACE] key, or double-click on the
parameter. Either method toggles between the two available values.
•• When you’’ve completed your edits, tap on OK.
The parameter list is displayed; the new value for the changed parameter is shown.
•• Tap on OK to exit to the preset list and save the changes.

C.4.12 Removing A Custom Preset

•• Highlight the custom preset you want to delete, and tap on the Remove button.
A window is displayed warning you that you are about to remove a preset.
•• Tap on Yes to remove the preset or No to cancel the operation.

C.4.13 Configuring Symbologies in the Teklogix Imagers Applet

All changes made in the Symbologies Presets in the Imagers Applet are also made in the
Scanners Applet. The Scanner Applet will reflect the settings of whichever Symbologies
Preset is made active in the Imager Applet.

C-16 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix C: Teklogix Imagers Applet
Filter Tab –– Manipulating Bar Code Data

Configuring Symbologies In The Teklogix Scanners Applet

When a symbology is enabled or configured using the Teklogix Scanners applet, the
changes are also made in the My Default preset. My Default automatically becomes the
active bar code symbology preset.
None of the other bar code decoding predefined presets is changed.
Configuring Symbologies In The My Default Preset
When My Default is the active preset
In this case, the changes to the symbology configuration are also made in the Teklogix Scan-
ners applet.
When My Default is not the active preset
In this case, the changes to the symbology configuration are not made in the Teklogix Scan-
ners applet.

C.4.14 Filter Tab –– Manipulating Bar Code Data

To configure rules for manipulating bar code data:
•• Tap on Start>Settings>System tab.
•• Tap on the Teklogix Imagers icon, and then tap on the Filter tab.

C.4.14.1 Modifying A Bar Code Setting

The rules for manipulating data from selected bar code symbologies can be modified. To
change the settings for a symbology:
•• Tap on the + symbols to expand the lists and view the parameter settings.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual C-17

 Appendix C: Teklogix Imagers Applet
Filter Tab –– Manipulating Bar Code Data

•• Scroll through the parameter list until you reach the parameter that you want to change.
•• For a parameter that can take a range of values:
- Highlight the parameter, and then press the [SPACE] key or double-click the
parameter.
- An associated dialog box containing the valid range of values for the parameter and
the current setting like the sample screen following is displayed.

- Type a value in the field provided.

•• For a parameter that takes a single character:
- Highlight the parameter and then press the [SPACE] key, or double-click on the
parameter. The following screen is displayed:

•• When you’’ve completed your edits, tap on OK.

C-18 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix C: Teklogix Imagers Applet
Translation Tab –– Configuring Rules

C.4.15 Translation Tab –– Configuring Rules

Translation rules enable the automatic processing of bar code data. Up to 10 cases can be de-
fined, each consisting of up to 10 sequential rules.

Note: Changes made to the translations configuration using the Teklogix Scanner Con-
trol Panel program are synchronized with changes made here. Changes made in
either place affect both translation tables.
•• Tap on Start>Settings>System tab.
•• Tap on the Teklogix Imagers icon, and then tap on the Translation tab.

For instructions on adding, editing, and removing translation rules, refer to the ““Translations
Tab”” on page 177.

C.4.16 Advanced Tab

C.4.16.1 File Locations For Captured Images
To configure the location for saved images, open the dialog box as follows:
•• Tap on Start>Settings>System tab.
•• Tap on the Teklogix Imagers icon, and then tap on the Translation tab.

To define the location where imager files will be stored:

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual C-19

 Appendix C: Teklogix Imagers Applet
Advanced Tab

•• Tap on the File Location button.

•• Type the file Name, choose the Folder and file Type.
•• Choose the Location in which your files will be saved.
•• When you have completed all the changes, tap on the Save button.

C.4.16.2 Configuring Triggers

Viewing The Trigger Configuration
The trigger on the WORKABOUT is configured using the Manage Triggers applet. The
Teklogix Imagers applet provides a shortcut to the Manage Triggers applet.
•• In the Advanced tab, tap on the Trigger Control button.

C-20 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix C: Teklogix Imagers Applet
Teklogix Scanners Applet

•• To view all the triggers and the hardware devices that are configured to use them, tap in
the checkbox next to Show all modules.

Adding, Editing And Removing Triggers

For instruction about adding, editing and removing triggers, refer to ““Manage Triggers”” on
page 158.

C.5 Teklogix Scanners Applet

The bar code symbologies that are to be read by the imager can be enabled using the Tek-
logix Scanners applet. Tapping on Start>Settings>System tab followed by the Teklogix
Scanners icon displays this applet.

Warning: Changes made to the symbology configuration using the Teklogix Scanner
applet are synchronized only with the My Defaults bar code symbology
preset. For details, refer to ““Configuring Symbologies in the Teklogix
Imagers Applet”” on page C-16.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual C-21

 APPENDIX D
BAR CODE SETTINGS
D.1 Scanner Menu

The drop-down menu to the right of the Scanner option allows you to choose from
one of the following scanner types used with your WORKABOUT: Decoded (in-
ternal), Decoded (HHP) or Decoded (Intermec ISCP).
The symbologies listed change to reflect the scanner you choose and the bar codes
it supports.

Important: To improve the decode speed and performance, enable only those
codes that are required by the application.

Keep in mind that some bar code types are only available when an internal
imaging scanner is installed. All internal scanners can be configured using the
Barcode dialog boxes.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual D-1

 Appendix D: Bar Code Settings
Decoded (Internal) Scanner

D.2 Decoded (Internal) Scanner

D.2.1 Options –– Decoded (Internal) Scanner

Dot Time (msec)
The value selected for ““Dot Time (msec)”” determines (in milliseconds) how long the target-
ing dot remains on before the scanner switches to a normal scan sweep. When you double-
tap on this parameter, a dialog box is displayed in which you can enter a value of 0 msec,
200 msec or 400 msec. A value of 0 (zero) disables the target dot.
Aim Duration
This parameter determines the total time the aiming pattern appears before the scanner laser
begins sweeping. When you double-tap on this parameter, a dialog box is displayed in which
you can enter a value from 0 to 30 (0 to 3 sec.). A value of 0 (zero) disables the aiming dot.
Laser On Time
The value assigned to this parameter determines how long the laser will remain on when the
scan button or trigger is pressed.
Double-tapping on this parameter displays a dialog box in which you can enter a value
between 5 and 99, each number representing 0.1.

D-2 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix D: Bar Code Settings
Advanced Options –– Decoded (Internal)

D.2.2 Advanced Options –– Decoded (Internal)

Continuous Scan Mode
Setting this parameter to ‘‘on’’ keeps the laser on and continuously decoding as long as the
scanner button is pressed and held down.
Minimum Cancel Time
The value assigned to this parameter determines the time delay before the scanner is turned
off, once the scanner trigger or button is released. This gives the scanner a minimum amount
of time to complete its current decode before the scan is cancelled when the user quickly
triggers on/off.
Power Mode
This parameter is a power-saving option. Tapping on it displays a screen listing two power
mode options: Continuous Power and Low Power.
In Continuous Power mode, the scanner is always on, waiting for a trigger pull or a serial
communication.
In Low Power mode, the scanner is in a standby state, drawing minimal power until a trigger
pull or serial communication wakes it. Keep in mind that while this option is more suitable
for battery powered applications, there will be a slight delay while the scanner powers up to
scan a bar code.
Low Power Timeout
To extend laser life, you can select the length of time the scanner remains active following a
successful decode. The scanner wakes from low power mode when a bar code is scanned –– a
successful decode restores normal blinking.
When you double-tap on this parameter, a dialog box is displayed in which you can choose a
value of 30 sec, 1 min, 2 min or 3 min.

Note: This parameter is only used if the Trigger Mode has been set to Continuous On and
the WORKABOUT is mounted in a fixed position; otherwise, ‘‘Low Power Timeout’’
is not used.

Parameter Scanning
Setting this parameter to on enables decoding of parameter bar codes.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual D-3

 Appendix D: Bar Code Settings
Advanced Options –– Decoded (Internal)

Linear Security Level

This parameter allows you to select the security level appropriate for your bar code quality.
There are four levels of decode security for linear code types (e.g., Code 39, Interleaved 2 of
5). Higher security levels should be selected for decreasing levels of bar code quality. As se-
curity levels increase, the scanner’’s decode speed decreases.
Double-tapping on this parameter displays a dialog box in which you can enter a value from
1 to 4.
““Linear security level 1”” specifies that the following code types must be successfully read
twice before being decoded:

Code Type Length

Codabar All
MSI Plessey 4 or less
D 5 of 5 8 or less
I 2 of 5 8 or less

““Linear security level 2”” specifies that all types of codes must be successfully read twice
before being decoded.
““Linear security level 3”” specifies that code types other than the following must be success-
fully read twice before being decoded. The following codes must be read three times:

Code Type Length

MSI Plessey 4 or less
D 2 of 5 8 or less
I 2 of 5 8 or less

““Linear security level 4”” requires that all code types be successfully read three times before
being decoded.

D-4 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix D: Bar Code Settings
Decoded (Internal) 2D Scanning Options

Bi-Direction Redundancy

Note: This parameter is only valid if a ““Linear Security Level”” is enabled.

When this parameter is enabled, a bar code must be successfully scanned in both directions
(forward and reverse) before being decoded.
Scan Angle
This option allows you to choose from two scan angles: Normal Angle or Alternate Angle.
Choosing Normal Angle allows the normal operation for scanning long range and short
range. Choosing Alternate Angle widens the beam to allow scanning of long bar codes at
short range but at the cost of long range scanning.

D.2.3 Decoded (Internal) 2D Scanning Options

Scanning Mode
When you double-tap on this parameter, a dialog box is displayed in which you can choose
one of the following scanning modes: Smart Raster, Always Raster, Programmable Raster,
Slab Pattern, Cyclone Pattern or Semi-Omni Pattern.
Raster Height And Raster Expand Rate
These parameter determine the laser pattern’’s height and rate of expansion.

Note: These parameters are only used when either Programmable Raster or
Always Raster is assigned to the ““2D Scanning Mode”” parameter. ““2D Raster
Height”” and ““2D Raster Expand Rate”” are intended for very specific applications
and are usually not required for normal scanning purposes.

Double-tapping on this parameter displays a dialog box in which you can enter a value from
1 to 15.

D.2.4 Data Options —— Decoded (Internal) Scanner

Transmit Code ID Char
A code ID character identifies the scanned bar code type. In addition to any single character
prefix already selected, the code ID character is inserted between the prefix and the
decoded symbol.
When you double-tap on this parameter, a dialog box is displayed in which you can choose a
transmit code: None, AIM or Symbol.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual D-5

 Appendix D: Bar Code Settings
Code 39

Scan Data Format

This parameter allows you to change the scan data transmission format. Double-tapping on
““Scan Data Format”” displays the following options from which you can choose a data
format: data (as-is), data [S1], data [S2], data [S1][S2], [P] data, [P] data [S1], [P] data [S2]
and [P] data [S1][S2].
Prefix [P], Suffix [S1] And Suffix [S2]
A prefix and/or one or two suffixes may be appended to scan data for use in data editing.
When you double-tap on these parameters, a dialog box is displayed in which you can enter
a value from 0 to 255.
Delete Char Set ECIs
Setting this parameter to on enables the scanner to delete any escape sequences representing
Character Set ECIs –– Extended Channel Interpretations (also known as GLIs) from its buffer
before transmission.
When this parameter is enabled, the scanner transmits data from PDF417 and MicroPDF417
bar codes containing Character Set ECIs, even when the ECI Protocol is disabled.
ECI Decoder
Setting this parameter to on enables the scanner to interpret any Extended Channel Interpre-
tations (ECIs) supported by the scanner. This parameter has no effect on symbols that were
not encoded using ECIs.
If this parameter is set to off and a symbol that was encoded using an ECI escape is scanned,
the scanner transmits the ECI escape followed by the uninterpreted data.

D.2.5 Code 39
Enabled
Setting this parameter to on enables ““Code 39””.
Enable Trioptic Code 39

Note: ““Trioptic Code 39”” and ““Full ASCII”” should not be enabled simultaneously. The
scanner does not automatically discriminate between these two symbologies.

Trioptic Code 39 symbols always contain six characters. Setting this parameter to on allows
this type of symbology to be recognized.

D-6 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix D: Bar Code Settings
Code 39

Convert To Code 32

Note: ““Code 39”” must be enabled in order for this parameter to function.

Setting this parameter to on allows the scanner to convert the bar code from ““Code 39””
to ““Code 32””.
Code 32 Prefix

Note: ““Convert to Code 32”” must be enabled in order for this parameter to function.

When this parameter is enabled, the prefix character ““A”” is added to all ““Code 32””
bar codes.
Set Length L1 And Set Length L2
Lengths for ““Code 39”” can be set for Any length, Length within a range, One discrete length
or Two discrete lengths. The length of a code refers to the number of characters (i.e., human
readable characters), including check digit(s).
Double-tapping on this parameter displays a dialog box labelled Set Code Lengths where
you can define the code length that will be decoded by your scanner.

Choosing One discrete length allows you to decode only those codes containing a selected
length. Choosing Two discrete lengths allows you to decode only those codes containing two
selected lengths. Length within a range allows you to decode a code type within a specified
range from 1 to 55.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual D-7

 Appendix D: Bar Code Settings
Code 39

Check Digit Verification

When this parameter is enabled (set to on), the integrity of a ““Code 39”” symbol is checked to
ensure that it complies with specified algorithms.

Note: Only those ““Code 39”” symbols that include a Mod 43 check digit are decoded when
this parameter is enabled.

Transmit Check Digit

If the check digit is to be transmitted with the data, this parameter must to enabled.
Full ASCII
If this parameter is enabled, the characters +, %, and / are used as escape characters. The
combination of an escape character and the next character is converted to an equivalent
ASCII character.
Decode Performance
If this parameter is enabled, one of three decode levels can be chosen in the ““Decode Perfor-
mance Level”” parameter.
Decode Perf. Level
This parameter provides three levels of decode performance or ““aggressiveness”” for Code
39 symbols. Increasing the performance level reduces the amount of required bar code ori-
entation –– this is useful when scanning very long and/or truncated bar codes. Keep in mind
that increased levels reduce decode security.
When you double-tap on this parameter, a dialog box is displayed in which you can enter a
decode performance level of between 1 and 3.
Length Restriction
The parameters in this sub-menu allow you to define the length of the bar codes that will be
decoded using either the Field Size parameter or the Minimum Size and Maximum Size pa-
rameters (see below). The order of operation to either match the Field Size or determine if
the length falls between the Minimum Size and Maximum Size is as follows:
•• Strip the leading and trailing characters.
•• Add the prefix and suffix characters.
•• Count the number of characters remaining to either match the field size or determine if
the length falls between the minimum and maximum size.

D-8 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix D: Bar Code Settings
Code 128

Field Size
When a value is assigned for this parameter, only bar codes that match the field size exactly
can be transmitted. If a value is assigned to this parameter, a Minimum Size and Maximum
Size value is not required.
Minimum Size And Maximum Size
When a value is assigned to these parameters, only bar code lengths that fall between the
minimum and maximum value can be decoded. If values are assigned to these parameters, a
Field Size value is not required.
Add/Remove Data
Prefix Char
This character, if non-zero, is added before a successfully decoded bar code. Press the key
you want to insert in the dialog box attached to this parameter. The ASCII/Unicode key
value of the keypress is displayed.
Suffix Char
This character, if non-zero, is added after a successfully decoded bar code. Press the key you
want to insert in the dialog box attached to this parameter. The ASCII/Unicode key value of
the keypress is displayed.
Strip Leading
This parameter determines the number of characters that will be removed from the begin-
ning of the bar code before the prefix character is added.

Note: For Code 39 bar codes, the ““AIAG Strip”” is performed before the ““Strip Leading””.

Strip Trailing
The value entered in this parameter determines the number of characters that will be
removed from the end of the bar code before the suffix character is added.

D.2.6 Code 128

Enabled
Set this parameter to on to enable ““Code 128””.
Enable GS1-128/GS1 US
Previously UPC/EAN and UCC, these types of bar codes include group separators and start
codes.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual D-9

 Appendix D: Bar Code Settings
EAN 13

Enable ISBT 128

To successfully scan this variation, ““Enable ISBT 128”” must be set to on.
Decode Performance
If this parameter is set to on, one of three decode levels assigned to the ““Decode Perfor-
mance Level”” parameter can be selected.
Decode Perf. Level
This parameter provides three levels of decode performance or ““aggressiveness”” for Code
128 symbols. Increasing the performance level reduces the amount of required bar code ori-
entation –– this is useful when scanning very long and/or truncated bar codes. Keep in mind
that increased levels reduce decode security.
When you double-tap on this parameter, a dialog box is displayed in which you can enter a
decode performance level of between 1 and 3.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.2.7 EAN 13
Enabled
Set this parameter to on to enable ““EAN 13””.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.2.8 EAN 8
Enabled
Set this parameter to on to enable ““EAN 8””.
EAN-8 Zero Extend
When this parameter is enabled, five leading zeros are added to decoded EAN-8 symbols,
making them compatible in format to EAN-13 symbols. Disabling this parameter returns
EAN-8 symbols to their normal format.

D-10 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix D: Bar Code Settings
UPC A

Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.2.9 UPC A
Enabled
Set this parameter to on to enable ““UPC A””.
UPC-A Check Digit
If you enable this parameter, the check digit is included with the decoded bar code data.
UPC-A Preamble
When you double-tap on this parameter, a dialog box is displayed where you can choose one
of three options for lead-in characters for UPC-A symbols transmitted to the host device:
System Char –– system character transmitted with the data, Country code and System Char ––
both the country code (““0”” for USA) and system character are transmitted with the or None
–– no preamble is transmitted. The lead-in characters are considered part of the symbol.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.2.10 UPC E
Enabled UPC-E
Set this parameter to on to allow ““UPC E”” bar code scans.
Enabled UPC-E1
Set this parameter to on to allow ““UPC-E1”” (zero suppressed) bar code scans.
UPC-E And UPC-E1 Check Digit
If you enable one or both of these parameters, a check digit is included with the decoded bar
code data.
UPC-E And UPC-E1 Preamble
When you double-tap on one of these parameters, a dialog box is displayed where you can
choose one of three options for lead-in characters for UPC-E and UPC-E1 symbols transmit-
ted to the host device: System Char –– system character transmitted with the data, Country
code and System Char –– both the country code (““0”” for USA) and system character are

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual D-11

 Appendix D: Bar Code Settings
UPC/EAN Shared Settings

transmitted with the data or None –– no preamble is transmitted. The lead-in characters are
considered part of the symbol.
Conv. UPC-E To UPC-A
This parameter converts UPC-E (zero suppressed) decoded data to UPC-A format before
transmission. After conversion, data follows UPC-A format and is affected by UPC-A pro-
gramming selections (e.g., Preamble, Check Digit).
Conv. UPC-E1 To UPC-A
This parameter converts UPC-E1 (zero suppressed) decoded data to UPC-A format before
transmission. After conversion, data follows UPC-A format and is affected by UPC-A pro-
gramming selections (e.g., Preamble, Check Digit).
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.2.11 UPC/EAN Shared Settings

The parameters you set here are a shared across all available UPC and EAN bar codes.
Enable Bookland EAN
Setting this parameter to on allows your scanner to recognize ““Bookland EAN”” bar codes.
Supplementals
““Supplementals”” are additionally appended characters (2 or 5).
Double-tapping this parameter displays a list of options. If Ignore is chosen, UPC/EAN is
decoded and the supplemental characters are ignored. If Decode is chosen, UPC/EAN
symbols are decoded with supplementals. Autodiscriminate works in conjunction with the
““Supp. Redundancy”” parameter.
Supp. Redundancy
With Autodiscriminate selected in the ““Supplementals”” parameter, ““Supp. Redundancy””
adjusts the number of times a symbol without supplementals is decoded before transmission.
When you double-tap on this parameter, a dialog box is displayed in which you can enter a
value between 2 and 20. A value of 5 or above is recommended when Autodiscriminate is
selected and you are decoding a mix of UPC/EAN symbols with and without supplementals.

D-12 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix D: Bar Code Settings
Code 93

Security Level
This parameter controls the tolerance for decoding edge-to-edge UPC/EAN bar codes.
Double-tapping on this parameter displays a dialog box in which you can choose a level
from 0 to 3. Lower values have a lower tolerance for misreads, but they also increase the
time it takes to decode the bar code.
Linear Decode
““Linear Decode”” applies to code types containing two adjacent blocks (e.g., UPC-A, EAN-
8, EAN-13). When enabled (set to on), a bar code is transmitted only when both the left and
right blocks are successfully decoded within one laser scan. This option should be enabled
when bar codes are in proximity to each other.
2D UPC Half Block Stitching
Setting this parameter to on enables ““UPC Half Block Stitching”” for the SE 3223 omnidirec-
tional engine only.

D.2.12 Code 93
Enabled
Set this parameter to on to enable ““Code 93”” or off to disable it.
Set Length L1 And Set Length L2
Lengths for ““Code 93”” can be set for Any length, Length within a range, One discrete length
or Two discrete lengths. The length of a code refers to the number of characters (i.e., human
readable characters), including check digit(s).
Double-tapping on this parameter displays a dialog box labelled Set Code Lengths where
you can define the code length that will be recognized by your scanner.
Choosing One discrete length allows you to decode only those codes containing a selected
length. Choosing Two discrete lengths allows you to decode only those codes containing two
selected lengths. Length within a range allows you to decode a code type within a specified
range from 4 to 55.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual D-13

 Appendix D: Bar Code Settings
Codabar

D.2.13 Codabar
Enabled
Set this parameter to on to enable ““Codabar”” or off to disable it.
Set Length L1 And Set Length L2
Lengths for ““Codabar”” can be set for Any length, Length within a range, One discrete length
or Two discrete lengths. The length of a code refers to the number of characters (i.e., human
readable characters), including check digit(s).
Double-tapping on this parameter displays a dialog box labelled Set Code Lengths where
you can define the code length that will be recognized by your scanner.
Choosing One discrete length allows you to decode only those codes containing a selected
length. Choosing Two discrete lengths allows you to decode only those codes containing
two selected lengths. Length within a range allows you to decode a code type within a spec-
ified range from 5 to 55.
CLSI Editing
When enabled, this parameter strips the start and stop characters
and inserts a space after the first, fifth, and tenth characters of a 14-character Codabar
symbol.

Note: Symbol length does not include start and stop characters.

NOTIS Editing
When enabled, this parameter strips the start and stop characters from decoded Codabar
symbol.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.2.14 MSI Plessey

Enabled
Set this parameter to on to enable ““MSI Plessey””.

D-14 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix D: Bar Code Settings
MSI Plessey

Set Length L1 And Set Length L2

Lengths for ““MSI Plessey”” can be set for Any length, Length within a range, One discrete
length or Two discrete lengths. The length of a code refers to the number of characters (i.e.,
human readable characters), including check digit(s).
Double-tapping on this parameter displays a dialog box labelled Set Code Lengths where
you can define the code length that will be recognized by your scanner.
Choosing One discrete length allows you to decode only those codes containing a selected
length. Choosing Two discrete lengths allows you to decode only those codes containing two
selected lengths. Length within a range allows you to decode a code type within a specified
range from 6 to 55.
Check Digits
Double-tapping on this parameter displays a dialog box in which you can choose One or
Two check digit(s).
If this parameter is set to One, it is assumed that the last digit is a check digit. If ““Check
Digits”” is set to Two, it is assumed that the last two digits are check digits.

Note: If Two check digits is selected, an MSI Plessey ““Check Digit Algorithm: must also be
selected. See below for details.

Transmit Check Digit

If this parameter is enabled, the check digit is included with the bar
code data.
Check Digit Algorithm
When the Two MSI Plessey check digits option is selected, an additional verification is re-
quired to ensure integrity. Double-tapping on this parameter displays a dialog box n which
you can choose the algorithm to be used: MOD 10/MOD 11 or MOD 10/MOD 10.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual D-15

 Appendix D: Bar Code Settings
Interleaved 2 of 5

D.2.15 Interleaved 2 of 5
Enabled
Set this parameter to on to enable ““Interleaved 2 of 5””.
Set Length L1 And Set Length L2
Lengths for ““Interleaved 2 of 5”” can be set for Any length, Length within a range, One dis-
crete length or Two discrete lengths. The length of a code refers to the number of characters
(i.e., human readable characters), including check digit(s).
Double-tapping on this parameter displays a dialog box labelled Set Code Lengths where
you can define the code length that will be recognized by your scanner.
Choosing One discrete length allows you to decode only those codes containing a selected
length. Choosing Two discrete lengths allows you to decode only those codes containing two
selected lengths. Length within a range allows you to decode a code type within a specified
range from 4 to 14.
Check Digit Verification
When enabled, this parameter checks the integrity of an I 2 of 5 symbol to
ensure it complies with a specified algorithm –– either USS (Uniform Symbology Specifica-
tion) or OPCC (Optical Product Code Council).
Transmit Check Digit
If this parameter is enabled, the check digit is included with the bar code data.
Convert To EAN 13
If this parameter is enabled, the I 2 of 5 bar code is converted to EAN 13.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.2.16 Discrete 2 of 5
Enabled
Set this parameter to on to enable ““Discrete 2 of 5””.

D-16 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix D: Bar Code Settings
RSS Code

Set Length L1 And Set Length L2

Lengths for ““Discrete 2 of 5”” can be set for Any length, Length within a range, One discrete
length or Two discrete lengths. The length of a code refers to the number of characters (i.e.,
human readable characters), including check digit(s).
Double-tapping on this parameter displays a dialog box labelled Set Code Lengths where
you can define the code length that will be recognized by your scanner.
Choosing One discrete length allows you to decode only those codes containing a selected
length. Choosing Two discrete lengths allows you to decode only those codes containing two
selected lengths. Length within a range allows you to decode a code type within a specified
range from 1 to 12.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.2.17 RSS Code

Enable
Setting this parameter to on enables ““2D RSS Code”” scanning capability.
Enable RSS-14 (Reduced Space Symbology)
RSS-14 code can be either purely linear or split in half with one half stacked on top of the
other half. Stacking the code reduces the bar code length, and providing the nominal height
of the code is maintained, it can be omni-directionally scanned.
Enable RSS Limited
““RSS-Limited”” is restricted, in that it can only encode 14 digit GTINs (global trade item
number) that begin with either a 0 or a 1. It is not stackable and is not designed to be read
omni-directionally.
Enable RSS Expanded
““RSS Expanded”” uses the same application identifiers as UCC/EAN-128 codes but it can be
split into sections and stacked several rows high, reducing the length of the symbol, while
increasing the capacity of data that can be stored. ““RSS Expanded”” code can be omni-direc-
tionally scanned.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual D-17

 Appendix D: Bar Code Settings
Composite

Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.2.18 Composite

Important: To successfully read this type of bar code, the two types of
symbologies included in a composite bar code must be enabled.
In addition, ““Center Bar Code Only”” must be disabled.

A composite symbol includes multi-row 2D components making it compatible with linear

and area CCD scanners along with linear and rastering laser scanners.
The options available for this parameter represent multi-level components of a composite
symbol.
Enable CC-C And Enable CC-AB
To activate these components, set these parameters to on.
Enable TLC-39
This composite component integrates MicroPDF417 with the linear code. Setting this pa-
rameter to on enables this parameter.

D.2.19 PDF-417
Enable
Setting this parameter to on enables PDF-417 two dimensional (2D) coding.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D-18 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix D: Bar Code Settings
Micro PDF-417

D.2.20 Micro PDF-417

Enable
Setting this parameter to on enables ““Micro PDF-417”” bar code scanning. Micro PDF-417 is
a multi-row symbology that is useful for applications requiring greater area efficiency but
lower data capacity than PDF-417.
Code 128 Emulation
When this parameter is enabled, the scanner transmits data from certain Micro PDF-417
symbols as if it was encoded in Code 128 symbols.
If Code 128 Emulation is enabled, the following Micro PDF-417 symbols are transmitted
with one of the following prefixes:
]C1 - if the first codeword is 903-907, 912, 914, 915
]C2 - if the first codeword is 908 or 909
]C0 - if the first codeword is 910 or 911
If Code 128 Emulation is set to off, the Micro PDF-417 symbols are transmitted with one of
the following prefixes:
]L3 - if the first codeword is 903-907, 912, 914, 915
]L4 - if the first codeword is 908 or 909
]L5 - if the first codeword is 910 or 911
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual D-19

 Appendix D: Bar Code Settings
Decoded (HHP)

D.3 Decoded (HHP)

•• Tap on the Scanner drop-down menu, and choose Decoded (HHP).

D.3.1 Options –– Decoded (HHP)

Laser On Time
The value assigned to this parameter determines how long the laser will remain on when the
scan button or trigger is pressed.
Double-tapping on this parameter displays a dialog box in which you can enter a value
between 1 and 10 seconds.

D.3.2 Advanced Options –– Decoded (HHP)

Continuous Scan Mode
Setting this parameter to ‘‘on’’ keeps the laser on and continuously decoding as long as the
scanner button is pressed and held down.
Minimum Cancel Time
The value assigned to this parameter determines the time delay before the scanner is turned
off, once the scanner trigger or button is released. This gives the scanner a minimum amount
of time to complete its current decode before the scan is cancelled when the user quickly
triggers on/off.

D-20 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix D: Bar Code Settings
Advanced Options –– Decoded (HHP)

Low Power Timeout

To extend laser life, you can select the length of time the scanner remains active following a
successful decode. The scanner wakes from low power mode when a bar code is scanned –– a
successful decode restores normal blinking.
When you double-tap on this parameter, a dialog box is displayed in which you can choose a
value of 30 sec, 1 min, 2 min or 3 min.

Note: This parameter is only used if the Trigger Mode has been set to Continuous On and
the WORKABOUT is mounted in a fixed position; otherwise, ‘‘Low Power Timeout’’
is not used.

Add AIM ID Prefix

The AIM ID (Association for Automatic Identification and Mobility) is an international bar
code identifier. When this parameter is enabled, the AIM ID is inserted at the beginning of
the decoded bar code.
Prefix Exception1:, 2: And 3:
This parameter works in conjunction with the AIM ID parameter. When AIM ID is enabled,
an AIM ID prefix is added to every bar code. The Prefix Exception parameter allows you to
switch off AIM ID for up to three bar codes.
Double-tapping on Prefix Exception 1:, Prefix Exception 2: or Prefix Exception 3: displays a
list of bar codes.

When a bar code in this list is highlighted, an AIM ID prefix is not added to the selected bar
code. (For a description of AIM ID, refer to ““Add AIM ID Prefix”” on page D-44.)

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual D-21

 Appendix D: Bar Code Settings
Code 39

Conversely, if you only have two or three bar codes that require the AIM ID prefix, you can
disable AIM ID and highlight the bar codes to which you want an AIM ID prefix applied
using the Prefix Exception parameters.

D.3.3 Code 39
Enabled
Setting this parameter to on enables ““Code 39””.
Strip Start/Stop Chars
Codabar uses the characters A, B, C, and D as start and stop characters. Thus, the first and
last digits of a Codabar message must be A, B, C, or D, and the body of the message should
not contain these characters. Setting this parameter to on strips the start and stop characters
from this bar code.
Check Char
When this parameter is set to Validate only, the integrity of a ““Code 39”” symbol is checked
to ensure that it complies with specified algorithms.
If ““Check Char”” is set to Validate and Transmit, the check character is validated and trans-
mitted with the data.
Setting this parameter to None disables this function.
Minimum And Maximum Length
Minimum and Maximum lengths for the bar code can be set from 0 to 48. The length of a
code refers to the number of characters (i.e., human readable characters), including check
digit(s).
Append
If this parameter enabled, any Code 39 bar code that contains a space as the first character
will be ““stored in memory””. Once a Code 39 barcode containing a non-space first character
is scanned, this bar code will be appended to the bar codes containing the spaces and the
imager will transmit the ALL the data. The spaces are then removed.
Pharmaceutical
This is a numeric (0-9) fixed length barcode used by Italian pharmacies. It is also referred to
as Code 32 Pharmacode and is a form of Code 39.

D-22 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix D: Bar Code Settings
Trioptic Code

Full ASCII
If this parameter is enabled, the characters +, %, and / are used as escape characters. The
combination of an escape character and the next character is converted to an equivalent
ASCII character.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.3.4 Trioptic Code

This code is used for labelling magnetic storage media.

Note: If you are scanning Code 32 Pharmaceutical codes, Trioptic Code must be off.

Enabled
Setting this parameter to on enables ““Trioptic Code””.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.3.5 Code 128

Enabled
Setting this parameter to on enables ““Code 128””.
ISBT Concatenation
These codes are not concatenated by default. You need to set this parameter to on to send
concatenated code.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual D-23

 Appendix D: Bar Code Settings
EAN 13 Settings

Minimum And Maximum Length

The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths –– 0 to 80.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.

D.3.6 EAN 13 Settings

Enabled
Set this parameter to on to enable ““EAN 13””.
Check Digit
If you enable this parameter, a check digit is included with the decoded bar code data.
Addendum Add-on 2 And Addendum Add-on 5
An addendum is a separate bar code, supplementary to the main bar code. Enabling these
parameters defines the length of the addendum bar code to either 2 or 5 characters.
Addendum Required
When this parameter is set to on, the scanner does not accept the main bar code without an
addendum.
Addendum Separator
““Addendum Separator”” is a space that is added between the EAN 13 bar code and the Add-
on code/Addenda. When this parameter is set to on, the scanner does not accept the main bar
code without an addendum.
ISBN Translate
When this parameter (International Standard Book Number) is enabled, the first 3 characters
(‘‘978’’) are ignored and the checksum (0.9, ‘‘X’’) is calculated on the remaining characters.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D-24 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix D: Bar Code Settings
EAN 8

D.3.7 EAN 8
Enabled
Set this parameter to on to enable ““EAN 8””.
Check Digit
If you enable this parameter, a check digit is included with the decoded bar code data.
Addendum Add-on 2 And Addendum Add-on 5
An addendum is a separate bar code, supplementary to the main bar code. Enabling these
parameters defines the length of the addendum bar code to either 2 or 5 characters.
Addendum Required
When this parameter is set to on, the scanner does not accept the main bar code without an
addendum.
Addendum Separator
Addendum Separator is a space that is added between the EAN 13 bar code and the Add-on
code/Addenda. When this parameter is set to on, the scanner does not accept the main bar
code without an addendum.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.3.8 UPC A Settings

Enabled
Set this parameter to on to enable ““UPC A”” bar code scanning recognition.
Check Digit
If you enable this parameter, a check digit is included with the decoded bar code data.
Transmit Number System
If this parameter is enabled, the number system digit is transmitted with the decoded bar
code data.
Addendum Add-on 2 And Addendum Add-on 5
An addendum is a separate bar code, supplementary to the main bar code. Enabling these
parameters defines the length of the addendum bar code to either 2 or 5 characters.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual D-25

 Appendix D: Bar Code Settings
UPC E Settings

Addendum Required
When this parameter is set to on, the scanner does not accept the main bar code without an
addendum.
Addendum Separator
““Addendum Separator”” is a space that is added between the UPC A bar code and the Add-
on code/Addenda. When this parameter is set to on, the scanner does not accept the main bar
code without an addendum.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.3.9 UPC E Settings

Enabled
Set this parameter to on to enable ““UPC E””.
Enabled UPC-E1
Set this parameter to on to allow ““UPC-E1”” (zero suppressed) bar code scans.
Expand
This parameter expands the UPC E code to a 12 digit UPC-A format.
Check Digit
If you enable this parameter, a check digit is included with the decoded bar
code data.
Transmit Number System
If this parameter is enabled, the number system digit is transmitted with the decoded bar
code data.
Addendum Add-on 2 And Addendum Add-on 5
An addendum is a separate bar code, supplementary to the main bar code.
Enabling these parameters defines the length of the addendum bar code to either
2 or 5 characters.
Addendum Required
When this parameter is set to on, the scanner does not accept the main bar code without an
addendum.

D-26 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix D: Bar Code Settings
UPC/EAN Shared Settings

Addendum Separator
““Addendum Separator”” is a space that is added between the UPC E bar code and the Add-on
code/Addenda. When this parameter is set to on, the scanner does not accept the main bar
code without an addendum.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.3.10 UPC/EAN Shared Settings

Extended Coupon Code
This parameter specifies whether or not the imager will read only UPC-A/EAN-13 bar
codes that have addenda.

Note: The 2 or 5 digit addenda must be turned on/off, depending on the desired behavior.

D.3.11 Code 93
Enabled
Set this parameter to on to enable ““Code 93””.
Minimum And Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths –– 0 to 80.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.3.12 Codabar
Enabled
Set this parameter to on to enable ““Codabar””.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual D-27

 Appendix D: Bar Code Settings
Codabar

Start/Stop Transmit
Codabar can use the following sets of characters as start and stop characters:
a, b, c, d
A, B, C, D
a, b, c, d, /, t, n, *, e
DC1, DC2, DC3, DC4
Thus, when a set is chosen, the first and last digits of a Codabar message must be one of
those characters and the body of the message should not contain these characters. Setting
this parameter to off strips the start and stop characters from this bar code.
Check Char
When this parameter is set to Validate only, the integrity of a ““Code 39”” symbol is checked
to ensure that it complies with specified algorithms.
If ““Check Char”” is set to Validate and Transmit, the check character is validated and trans-
mitted with the data.
Setting this parameter to None disables this function.
Concatenation
““Codabar”” supports symbol concatenation. When you enable Concatenation, the imager
looks for a Codabar symbol with a ““D”” start character that is adjacent to a symbol with a
““D”” stop character. In this case, the two messages are concatenated into one with the ““D””
characters omitted.
Minimum And Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths –– 2 to 60.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D-28 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix D: Bar Code Settings
MSI Plessey

D.3.13 MSI Plessey

Enabled
Set this parameter to on to enable MSI.
Enable Plessey
Set this parameter to on to enable Plessey.
Check Char
When this parameter is set to Validate only, the integrity of the symbol is checked to ensure
that it complies with specified algorithms.
If ““Check Char”” is set to Validate and Transmit, the check character is validated and trans-
mitted with the data.
Setting this parameter to None disables this function.
Minimum And Maximum Length
These parameters apply to MSI bar codes. The length of a code refers to the number of char-
acters (i.e., human readable characters), including check digit(s). Double-tapping on these
parameters displays a screen in which you can set the minimum and maximum allowable
code lengths –– 4 to 48.
Plessey Minimum And Plessey Maximum Length
These parameters apply to Plessey bar codes.The length of a code refers to the number of
characters (i.e., human readable characters), including check digit(s). Double-tapping on
these parameters displays a screen in which you can set the minimum and maximum allow-
able code lengths –– 4 to 48.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.3.14 Code 11
Enabled
Set this parameter to on to enable ““Code 11””.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual D-29

 Appendix D: Bar Code Settings
Interleaved 2 of 5

Check Digits
Double-tapping on this parameter displays a dialog box in which you can choose One Check
Digit or Two check digits.
If this parameter is set to One Check Digit, it is assumed that the last digit is a check digit. If
it is set to Two Check Digits, it is assumed that the last two digits are check digits.
Minimum And Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths –– 1 to 80.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.3.15 Interleaved 2 of 5
Enabled
Set this parameter to on to enable ““Interleaved 2 of 5””.
Check Digit
When this parameter is set to Validate only, the integrity of a symbol is checked to ensure
that it complies with specified algorithms.
If ““Check Digit”” is set to Validate and Transmit, the check digit is validated and transmitted
with the data.
Setting this parameter to None disables this function.
Minimum And Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths –– 1 to 80.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.

D-30 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix D: Bar Code Settings
Matrix 2 of 5

Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.3.16 Matrix 2 of 5
Enabled
Set this parameter to on to enable ““Matrix 2 of 5””.
Minimum And Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths –– 1 to 80.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.3.17 IATA 2 of 5
Enabled
Set this parameter to on to enable ““IATA 2 of 5””.
Minimum And Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths –– 1 to 48.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual D-31

 Appendix D: Bar Code Settings
Discrete 2 of 5

D.3.18 Discrete 2 of 5
Enabled
Set this parameter to on to enable ““Discrete 2 of 5””.
Minimum And Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths –– 1 to 48.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.3.19 Telepen
Enabled
Set this parameter to on to enable ““Telepen””.
Output
If you choose AIM Output, the imager reads symbols with start/stop pattern 1 and decodes
them as standard full ASCII (start/stop pattern 1). If you choose Original Output, the imager
reads symbols with start/stop pattern 1 and decodes them as compressed numeric with op-
tional full ASCII (start/stop pattern 2).
Minimum And Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths –– 1 to 60.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D-32 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix D: Bar Code Settings
RSS Code (Reduced Space Symbology)

D.3.20 RSS Code (Reduced Space Symbology)

Enable
Setting this parameter to on enables ““RSS Code”” scanning capability.
Enable RSS Limited
‘‘RSS-Limited”” is restricted, in that it can only encode 14 digit GTINs (global trade item
number) that begin with either a 0 or a 1. It is not stackable and is not designed to be read
omni-directionally.
Enable RSS Expanded
““RSS Expanded”” uses the same application identifiers as UCC/EAN-128 codes but they can
be split into sections and stacked several rows high, reducing the length of the symbol, while
increasing the capacity of data that can be stored. ““RSS Expanded”” code can be omni-direc-
tionally scanned.
Minimum And Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths –– 1 to 74.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.3.21 PosiCode (Reduced Space Symbology)

Enable
Setting this parameter to on enables ““PosiCode”” scanning capability.
PosiCode
““PosiCode”” is a ““position”” based symbology. A position based symbology de-couples the
widths of the bars from their positions. The centers of the bars are specified to be laid out on
a grid of equally spaced parallel lines. The distance between these grid lines is called the G-
dimension and is analogous to the X-dimension of conventional bar codes.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual D-33

 Appendix D: Bar Code Settings
Composite

There are two variations of this code: PosiCode A, and PosiCode B. The options available
with this parameter allow to choose ‘‘A and B’’, ‘‘A and B and Limited A’’ or ‘‘A and B and
Limited B’’.
Minimum And Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths –– 1 to 80.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.3.22 Composite

Important: To successfully read this type of bar code, the two types of symbologies
included in a composite bar code must be enabled.

A composite symbol includes multi-row 2D components making it compatible with linear

and area CCD scanners along with linear and rastering laser scanners.
The options available for this parameter represent multi-level components of a
composite symbol.
GS1 128
““GS1 128”” is the GS1 implementation of the Code 128 barcode specification. The former
correct name was UCC/EAN-128.
““GS1-128”” uses a series of Application Identifiers to include additional data such as best
before dates, batch numbers, quantities, weights and many other attributes needed by
the user.
EAN/UCC 128 Emulation
The options in this parameter allow you to turn this emulation on or off, or to enable
RSS Emulation.

D-34 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix D: Bar Code Settings
TLC-39

Minimum And Maximum Length

The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths –– 1 to 2435.

D.3.23 TLC-39
This composite component integrates MicroPDF417 with the linear code.
Enabled
Setting this parameter to on enables this parameter.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.3.24 PDF-417
Enabled
Set this parameter to on to enable ““PDF-417””.
Minimum And Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths –– 1 to 2750.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.3.25 Micro PDF-417

Enabled
Set this parameter to on to enable ““Micro PDF-417””.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual D-35

 Appendix D: Bar Code Settings
Code 16K

Minimum And Maximum Length

The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths –– 1 to 366.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.3.26 Code 16K

The ““Code 16K”” bar code is a multiple-row bar code that can encode the full ASCII charac-
ter set below ASCII 128. It uses existing UPC and Code 128 character set patterns. Up to 77
full ASCII characters or 154 numeric characters can be encoded into 2 to 16 rows. Each row
is divided by a separator bar. The top and bottom of the symbol also have separator bars that
extend to the ends of the minimum quiet zones.
Enabled
Set this parameter to on to enable ““Code 16K””.
Minimum And Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths –– 1 to 160.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.3.27 Code 49
The ““Code 49”” bar code is a multiple-row bar code that can encode the full ASCII character
set below ASCII 128. Up to 49 alphanumeric characters or 81 numeric characters can be
encoded into two to eight rows. Each row is divided by a separator bar. The top and bottom
of the symbol also have separator bars that extend to the ends of the minimum quiet zones.

D-36 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix D: Bar Code Settings
Codablock

Enabled
Set this parameter to on to enable ““Code 49””.
Minimum And Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths –– 1 to 81.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.3.28 Codablock
Enable
Set this parameter to on to enable ““Codablock””.
Minimum And Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths –– 1 to 2048.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.3.29 2D Data Matrix

Enable
Set this parameter to on to enable ““2D Data Matrix””.
Minimum And Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths –– 1 to 1500.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual D-37

 Appendix D: Bar Code Settings
2D QR Code

Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.3.30 2D QR Code
Enabled
Set this parameter to on to enable ““2D QR Code””.
Minimum And Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths –– 1 to 3500.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.3.31 2D Maxicode
Enabled
Set this parameter to on to enable ““2D Maxicode””.
Minimum And Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths –– 1 to 150.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D-38 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix D: Bar Code Settings
2D Aztec

D.3.32 2D Aztec
Enabled
Set this parameter to on to enable ““2D Aztec””.
Aztec Runes
Aztec Runes, the smallest type of Aztec Code symbol, has the ability to encode a very short
license plate message.
Minimum And Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths –– 1 to 3750.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.3.33 Postal: PlaNET

Enabled
Set this parameter to on to enable ““Postal: PlaNET””.
Check Digit
If enabled, the check digit will be transmitted at the end of the scanned data.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.3.34 Postal: PostNET

Enabled
Set this parameter to on to enable ““Postal: PostNET””.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual D-39

 Appendix D: Bar Code Settings
Postal: Australian

Check Digit
If enabled, the check digit will be transmitted at the end of the scanned data.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.3.35 Postal: Australian

Enabled
Set this parameter to on to enable ““Postal: Australian””.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.3.36 Postal: Canadian

Enabled
Set this parameter to on to enable ““Postal: Canadian””.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.3.37 Postal: China

Enabled
Set this parameter to on to enable ““Postal: China””.

D-40 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix D: Bar Code Settings
Postal: Japanese

Minimum And Maximum Length

The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths –– 2 to 80.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.3.38 Postal: Japanese

Enabled
Set this parameter to on to enable ““Postal: Japanese””.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.3.39 Postal: Kix

Enabled
Set this parameter to on to enable ““Postal: Kix””.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.3.40 Postal: Korean

Enabled
Set this parameter to on to enable ““Postal: Korean””.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual D-41

 Appendix D: Bar Code Settings
Postal: Royal

Minimum And Maximum Length

The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths –– 2 to 48.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.3.41 Postal: Royal

Enabled
Set this parameter to on to enable ““Postal: Royal””.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.4 Decoded

•• Tap on the Scanner drop-down menu, and choose Decoded (Intermec ISCP).

D-42 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix D: Bar Code Settings
Options –– Decoded Scanner

D.4.1 Options –– Decoded Scanner

Laser On Time
The value assigned to this parameter determines how long the laser will remain on when the
scan button or trigger is pressed.
Double-tapping on this parameter displays a dialog box in which you can enter a value
between 1 and 10 seconds.

D.4.2 Advanced Options –– Decoded Scanner

Continuous Scan Mode
Setting this parameter to ‘‘on’’ keeps the laser on and continuously decoding as long as the
scanner button is pressed and held down.
Minimum Cancel Time
The value assigned to this parameter determines the time delay before the scanner is turned
off, once the scanner trigger or button is released. This gives the scanner a minimum amount
of time to complete its current decode before the scan is cancelled when the user quickly
triggers on/off.
Low Power Timeout
To extend laser life, you can select the length of time the scanner remains active following a
successful decode. The scanner wakes from low power mode when a bar code is scanned –– a
successful decode restores normal blinking.
When you double-tap on this parameter, a dialog box is displayed in which you can choose a
value of 30 sec, 1 min, 2 min or 3 min.

Note: This parameter is only used if the Trigger Mode has been set to Continuous On and
the WORKABOUT is mounted in a fixed position; otherwise, ‘‘Low Power Timeout’’
is not used.

Parameter Scanning
Setting this parameter to Enabled allows decoding of parameter bar codes.
Same Read Validate
The data is only transmitted after repeated reads give the same result. The
value assigned at this parameter determines the number of reads required, from
0 to 10 times.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual D-43

 Appendix D: Bar Code Settings
Code 39

Same Read Timeout

Prevents the same bar code from being read more than once. The value assigned determines
after what time period the scanner will timeout, from 0 to 2550 msec.
Diff Read Timeout
Prevents unwanted reading of other bar codes on the same label. The value assigned deter-
mines after what time period the scanner will timeout, from 0 to 2550 msec.
Add AIM ID Prefix
The AIM ID (Association for Automatic Identification and Mobility) is an international bar
code identifier. When this parameter is enabled, the AIM ID is inserted at the beginning of
the decoded bar code.

D.4.3 Code 39
Enable
Setting this parameter to on enables ““Code 39””.
Full ASCII
If this parameter is enabled, the characters +, %, and / are used as escape characters. The
combination of an escape character and the next character is converted to an equivalent
ASCII character.
Reading Range
Determines the reading distance from which a bar code can be successfully scanned. The
default setting, Extended, allows for increased reading distance.
Start/Stop Transmit
Setting this parameter to on enables the transmission of start and stop characters, which are
usually not transmitted. Code 39 can start and end with either a * or a $ character (see also
next parameter, ““Accepted Start Char””).
Accepted Start Char
This parameter allows the user the option of using one of the two start/stop characters or
both ($ char, * char, $ and * char).

D-44 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix D: Bar Code Settings
Code 128

Check Digit Verification

Uses the specified algorithm of the option you've chosen to ensure the integrity of the
symbol data before transmitting. If the data does not contain that algorithm, the data is not
transmitted. The available options are: Disabled, MOD 43 Check, French CIP, or Italian CIP.

Note: French CIP (French pharmaceutical) is only used with bar codes containing 7
characters.
Italian CIP (Italian pharmaceutical) is also known as Code 32. It is transmitted as a
standard Code 39 if checksum is not validated.

Transmit Check Digit

If the check digit is to be transmitted with the data, this parameter must be enabled.
Minimum Length
Minimum lengths for the bar code can be set from 0 to 255. The length of a code refers to
the number of characters (i.e., human readable characters), including check digit(s).
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.4.4 Code 128

Enable
Setting this parameter to on enables ““Code 128””.
GS1-128
““GS1-128”” is the GS1 implementation of the Code 128 barcode specification. The former
correct name was UCC/EAN-128.
GS1-128 Identifier
““GS1-128 Identifier”” allows the AIM ID " ]C1" for EAN 128 to be transmitted or removed.
By default, this identifier is transmitted if EAN 128 is enabled.
GTIN Compliant
GTIN (global trade item number) processing transmits EAN 128 as the 14-character
EAN/UCC GTIN. To use GTIN processing, you must activate the EAN 128 symbology.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual D-45

 Appendix D: Bar Code Settings
Code 128

Important: When EAN 128 and GTIN processing are both activated, it is not possible to
read normal EAN 128 Codes.

FNC1 Conversion
““FNC1 Conversion”” allows the embedded FNC1 character to be converted to another char-
acter for applications that cannot use the default <GS> Group Separator or hex (1d).
Double-tapping on this option displays a dialog box listing the allowable range –– 0 to 255.
Enable ISBT 128
To successfully scan this type of bar code (International Society of Blood Transfusion), this
option must be set to on. If you enable this type of bar code, Code 128/EAN 128 is deacti-
vated to avoid any confusion.
ISBT Concat Transmit
The codes are not concatenated by default. You need to choose one of the options provided
for this parameter to send concatenated code. Choosing Only Concatenated Codes transmits
only concatenated codes——single codes will not be transmitted. Choosing Concatenated or
Single transmits single codes or concatenated codes. If only one code of a pair is read, that
code will be transmitted as a single code. If both codes in a pair are detected, they will be
concatenated provided that ISBT Concat Any Pair (see below) is enabled.
ISBT Concat Any Pair
Enabling this parameter causes all code pairs that can be, to be concatenated even if they do
not comply with Section 4.1 of the ““ISBT 128 Bar Code Symbology and Application Speci-
fication for Labeling of Whole Blood and Blood Components”” (June 2000, Version 1.2.1).
Reading Range
Determines the reading distance from which a bar code can be successfully scanned. The
default setting Extended, allows for increased reading distance.
Check Digit Verification
The available options for this parameter are Disabled or French CIP. This parameter uses the
specified algorithm of the option you've chosen to ensure the integrity of the symbol data
before transmitting. If the data does not contain that algorithm, the data is not transmitted.

Note: French CIP (French pharmaceutical) is only used with bar codes containing 7
characters.

D-46 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix D: Bar Code Settings
EAN 13

Minimum Length
Minimum lengths for the bar code can be set from 0 to 255. The length of a code refers to
the number of characters (i.e., human readable characters), including check digit(s).
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.4.5 EAN 13
Enabled
Set this parameter to on to enable ““EAN 13””.
ISBN Conversion
When this parameter (International Standard Book Number) is enabled, the first 3 characters
(‘‘978’’) are ignored and the checksum (0.9, ‘‘X’’) is calculated on the remaining characters.
Transmit Check Digit
If the check digit is to be transmitted with the data, this parameter must be enabled.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.4.6 EAN 8
Enabled
Set this parameter to on to enable ““EAN 8””.
Transmit Check Digit
If the check digit is to be transmitted with the data, this parameter must be enabled.
Convert To EAN 13
If this parameter is enabled, an EAN 8 bar code is converted to EAN 13.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual D-47

 Appendix D: Bar Code Settings
UPCA

D.4.7 UPCA
Enabled
Set this parameter to on to enable ““UPC A”” bar code scanning recognition.
Transmit Check Digit
If the check digit is to be transmitted with the data, this parameter must be enabled.
Transmit Number System
If this parameter is enabled, the number system digit is transmitted with the decoded bar
code data.
Convert To EAN 13
If this parameter is enabled, a UPC A bar code is converted to EAN 13.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.4.8 UPC E
Enabled
Set this parameter to on to enable ““UPC E””.
Enable UPC-E1
Set this parameter to on to allow ““UPC-E1”” (zero suppressed) bar code scans.
Transmit Check Digit
If the check digit is to be transmitted with the data, this parameter must be enabled.
Transmit Number System
If this parameter is enabled, the number system digit is transmitted with the decoded bar
code data.
Convert To UPC-A
This parameter converts UPC E (zero suppressed) decoded data to UPC A format before
transmission. After conversion, data follows UPC A format and is affected by UPC A pro-
gramming selections (e.g. Check Digit).

D-48 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix D: Bar Code Settings
UPC/EAN Shared

Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.4.9 UPC/EAN Shared

The setting assigned to the ““Addendum”” parameter associated with this option is shared
across all UPC and EAN bar codes.
Addendum
An addendum is a separate bar code, supplementary to the main bar code. This parameter
provides two options: Not Required but Transmitted if Read or Required and Transmitted.
•• Double-tap on Addendum to display a dialog box listing your options.
•• Highlight an item, and tap on OK.
When ““Addendum”” is set to Not Required but Transmitted if Read, the scanner searches for
an addendum and if one exists, appends it to the main bar code. When the parameter is set to
Required and Transmitted, the scanner does not accept the main bar code without an
addendum.
Addendum Add-on 2 And Addendum Add-on 5
Enabling these parameters sets the length of the addendum bar code to either 2 or
5 characters.
Addendum Security
If you tap on ““Addendum Security””, a dialog box is displayed in which you can define the
security level of add-on 2 or add-on 5 with a value from 0 to 100. As security levels in-
crease, the scanner decode speed decreases.
GTIN Compliant
GTIN (global trade item number) processing transmits EAN 128 as the 14-character
EAN/UCC GTIN. To use GTIN processing, you must activate the EAN 128 symbology.

Important: When EAN 128 and GTIN processing are both activated, it is not possible to
read normal EAN 128 Codes.

Reading Range
This parameter determines the reading distance from which a bar code can be successfully
scanned. The default setting, Extended, allows for increased reading distance.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual D-49

 Appendix D: Bar Code Settings
Code 93

D.4.10 Code 93
Enabled
Set this parameter to on to enable ““Code 93””.
Minimum Length
Minimum lengths for the bar code can be set from 0 to 255. The length of a code refers to
the number of characters (i.e., human readable characters), including
check digit(s).
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.4.11 Codabar
Enabled
Set this parameter to on to enable ““Codabar””.
Start/Stop Transmit
Codabar can use the following sets of characters as start and stop characters:
a, b, c, d
A, B, C, D
a, b, c, d, /, t, n, *, e
DC1, DC2, DC3, DC4
Thus, when a set is chosen, the first and last digits of a Codabar message must be one of
those characters and the body of the message should not contain these characters. Setting
this parameter to Not Transmitted strips the start and stop characters from this bar code.
CLSI Library System
When enabled, spaces are inserted after characters 1, 5, 10 in the 14-character label (used in
the USA by libraries using the CLSI system).

D-50 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix D: Bar Code Settings
MSI Plessey

Check Digit Verification

When enabled, this parameter checks the integrity of a symbol to ensure it complies with a
specified algorithm –– either USS (Uniform Symbology Specification) or OPCC (Optical
Product Code Council).
Transmit Check Digit
If the check digit is to be transmitted with the data, this parameter must be enabled.
Set Length L1, Set Length L2, And Set Length L3
Lengths for ““Codabar”” can be set from 0 to 255. The length of a code refers to the number of
characters (i.e., human readable characters), including check digit(s).
Double-tapping on these parameters displays dialog boxes where you can define the code
length that will be recognized by your scanner.
Length Mode
You can choose to set L1 as Minimum Length or L1,L2,L3 as Fixed Length.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.4.12 MSI Plessey

Enabled
Set this parameter to on to enable ““MSI””.
Enable Plessy
Set this parameter to on to enable ““Plessy””.
Check Digit Verification
The available options for this parameter are MOD 10 Check and Double MOD 10 Check.
This parameter uses the specified algorithm of the option you've chosen to ensure the integ-
rity of the symbol data before transmitting. If the data does not contain that algorithm, the
data is not transmitted.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual D-51

 Appendix D: Bar Code Settings
Code 11

Transmit Check Digit

If the check digit is to be transmitted with the data, this parameter must be enabled.
Plessy Transmit Check Digit
If the check digit is to be transmitted with the Plessy data, this parameter must be enabled.
Minimum Length
Minimum lengths for the bar code can be set from 0 to 255. The length of a code refers to
the number of characters (i.e., human readable characters), including check digit(s).
Plessy Minimum Length
Minimum lengths for the Plessy bar code can be set from 0 to 255. The length of a code
refers to the number of characters (i.e., human readable characters), including check digit(s).
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.4.13 Code 11
Enabled
Set this parameter to on to enable ““Code 11””.
Check Digit Verification
The available options for this parameter are MOD 10 Check and Double MOD 10
Check.This parameter uses the specified algorithm of the option you've chosen to ensure the
integrity of the symbol data before transmitting. If the data does not contain that algorithm,
the data is not transmitted.
Transmit Check Digit
If the check digit is to be transmitted with the data, this parameter must be enabled.
Minimum Length
Minimum lengths for the bar code can be set from 0 to 255. The length of a code refers to
the number of characters (i.e., human readable characters), including check digit(s).

D-52 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix D: Bar Code Settings
Interleaved 2 of 5

Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.4.14 Interleaved 2 of 5
Enabled
Set this parameter to on to enable ““Interleaved 2 of 5””.
Reading Range
This parameter determines the reading distance from which a bar code can be successfully
scanned. The default setting, Extended, allows for increased reading distance.
Check Digit Verification
The available options for this parameter are Disabled, MOD 10 Check and French CIP.
““Check Digit Verification”” uses the specified algorithm of the option you've chosen to
ensure the integrity of the symbol data before transmitting. If the data does not contain that
algorithm, the data is not transmitted.

Note: French CIP (French pharmaceutical) is only used with bar codes containing 7
characters.

Transmit Check Digit

If the check digit is to be transmitted with the data, this parameter must be enabled.
Set Length L1, Set Length L2, And Set Length L3
Lengths for ““Interleaved 2 of 5”” can be set from 0 to 255. The length of a code refers to the
number of characters (i.e., human readable characters), including check digit(s).
Double-tapping on these parameters displays dialog boxes where you can define the code
length that will be recognized by your scanner.
Length Mode
You can chose to set L1 as Minimum Length or L1,L2,L3 as Fixed Length.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual D-53

 Appendix D: Bar Code Settings
Matrix 2 of 5

Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.4.15 Matrix 2 of 5
Enabled
Set this parameter to on to enable ““Matrix 2 of 5””.
Minimum Length
Minimum lengths for the bar code can be set from 0 to 255. The length of a code refers to
the number of characters (i.e., human readable characters), including
check digit(s).
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page 9 for details.

D.4.16 Discrete 2 of 5
Enabled
Set this parameter to on to enable ““Discrete 2 of 5””.
Standard 2 of 5 Format
This parameter allows you to choose a standard format –– either Identic on (6 start/stop bars)
or Computer Identics (4 start/stop bars).
Check Digit Verification
The available options for this parameter are Disabled and MOD 10 Check. ““Check Digit
Verification”” uses the specified algorithm of the option you've chosen to ensure the integrity
of the symbol data before transmitting. If the data does not contain that algorithm, the data is
not transmitted.
Transmit Check Digit
If the check digit is to be transmitted with the data, this parameter must be enabled.

D-54 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix D: Bar Code Settings
Telepen

Set Length L1, Set Length L2, And Set Length L3

Lengths for ““Discrete 2 of 5”” can be set from 0 to 255. The length of a code refers to the
number of characters (i.e., human readable characters), including check digit(s).
Double-tapping on these parameters displays dialog boxes where you can define the code
length that will be recognized by your scanner.
Length Mode
You can chose to set L1 as Minimum Length or L1,L2,L3 as Fixed Length.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.4.17 Telepen
Enabled
Set this parameter to on to enable ““Telepen””.
Format
This parameter allows you to set the bar code character format to either ASCII
or Numeric.
Minimum Length
Minimum lengths for the bar code can be set from 0 to 255. The length of a code refers to
the number of characters (i.e., human readable characters), including check digit(s).
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.4.18 RSS Code (Reduced Space Symbology)

Enable
Setting this parameter to on enables ““RSS Code”” scanning capability.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual D-55

 Appendix D: Bar Code Settings
Composite

Enable RSS-14
RSS-14 code can be either purely linear or split in half with one half stacked on top of the
other half. Stacking the code reduces the bar code length, and providing the nominal height
of the code is maintained, it can be omni-directionally scanned.
Enable RSS Limited
““RSS-Limited”” is restricted, in that it can only encode 14 digit GTINs (global trade item
number) that begin with either a 0 or a 1. It is not stackable and is not designed to be read
omni-directionally.
Enable RSS Expanded
““RSS Expanded”” uses the same application identifiers as UCC/EAN-128 codes but they can
be split into sections and stacked several rows high, reducing the length of the symbol, while
increasing the capacity of data that can be stored. ““RSS Expanded”” code can be omni-direc-
tionally scanned.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.4.19 Composite

Important: To successfully read this type of bar code, the two types of symbologies
included in a composite bar code must be enabled. In addition, ““Center Bar
Code Only”” must be disabled.

A composite symbol includes multi-row 2D components making it compatible with linear

and area CCD scanners along with linear and rastering laser scanners.
The options available for this parameter represent multi-level components of a
composite symbol.
Enable CC-C And Enable CC-AB
To activate these components, set these parameters to on.

D-56 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix D: Bar Code Settings
TLC-39

Linear Transmission Only

When ‘‘Linear Transmission Only’’ is enabled, only the linear code portion of the composite
bar code is transmitted when scanned.
UPC-EAN Composite Message
This option allows you to choose how UPC-EAN shared bar codes are transmitted: Always
Linked, Never Linked or Auto-discriminate.

D.4.20 TLC-39
Enable
This composite component integrates MicroPDF417 with the linear Code 39 symbol.
Setting this parameter to on enables this parameter.
Linear Transmission Only
When ““Linear Transmission Only”” is enabled, only the linear portion of the composite bar
code is transmitted when scanned.
Security Level
This parameter is used to differentiate between TLC-39 and standard Code 39. Tapping on
““Security Level”” displays a dialog box in which you can assign a value from 0 to 100. The
higher the value assigned, the lower the decode rate.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual D-57

 Appendix D: Bar Code Settings
PDF-417

D.4.21 PDF-417
Enabled
Set this parameter to on to enable ““PDF-417””.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D.4.22 Micro PDF-417

Enabled
Set this parameter to on to enable ““Micro PDF-417””.
Code 128 Emulation
When this parameter is enabled, the scanner transmits data from certain Micro PDF-417
symbols as if it was encoded in Code 128 symbols.
If Code 128 Emulation is enabled, the following Micro PDF-417 symbols are transmitted
with one of the following prefixes:
]C1 - if the first codeword is 903-907, 912, 914, 915
]C2 - if the first codeword is 908 or 909
]C0 - if the first codeword is 910 or 911
If Code 128 Emulation is set to off, the Micro PDF-417 symbols are transmitted with one of
the following prefixes:
]L3 - if the first codeword is 903-907, 912, 914, 915
]L4 - if the first codeword is 908 or 909
]L5 - if the first codeword is 910 or 911
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

D-58 WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual

 Appendix D: Bar Code Settings
Codablock

D.4.23 Codablock
Enable Codablock A
Set this parameter to on to enable ““Codablock type A””.
Enable Codablock F
Set this parameter to on to enable ““Codablock type F””.
Length Restriction
Refer to ““Length Restriction”” on page D-8 for details.
Add/Remove Data
Refer to ““Add/Remove Data”” on page D-9 for details.

WORKABOUT PRO 3 with Windows Mobile 6.1 User Manual D-59

 INDEX

A alpha keys, accessing (WORKABOUT

About Device icon 147 PRO3 S) 45
About icon (software version) 146 Append 22
Accepted Start Char D-44 appending to bar codes
accessories characters 176
carrying case 257 App Launch icon 124
desktop docking station 263 ASCII
Ethernet adaptor cable 267 Full Ascii D-44
hand strap 249 audio indicators
holster, soft shell 257 beep conditions 49
pistol grip 251 volume adjustment 50
port replicator 279 automotive power adaptor 269
quad battery charger 271
quad docking station 273 B
single battery charger 269 backlight
vehicle cradle 276 Battery Power tab 148
ActiveSync 14, 89 External Power tab 149
setting up 89 intensity 47
adaptor cable Intensity tab 149
USB-Ethernet 267 backplate, trigger 253
Addendum D-49 backup battery 11
Addendum Add-on 2 24, 25, 26, D-49 backup profile, creating (Total Recall) 187
Addendum Add-on 5 24, 25, 26, D-49 backup profile, restoring (Total Recall)
Addendum Required 24, 25, 26 190
Addendum Security D-49 backup profile, viewing (Total Recall) 191
Addendum Separator 24, 25, 26, 27 Bad Scan Beep 176
Add Remove Data (bar code scanning) Bar code
D-9 Decoding symbology predefined
Prefix D-9 presets C-2
Strip Leading D-9 bar code
Suffix Char D-9 appending to 176
Aim Duration D-2 Decoded D-2
aiming dot, duration of D-2 displaying type of bar code 176
alarm, setting 65 Options tab 175
alarms, setting 152 symbologies
aligning touchscreen 47 Codabar D-14, 27, D-50
All Code 11 29, D-52
Predefined preset C-2 Code 128 D-9
alpha keys, accessing (WORKABOUT Code 93 D-13, 27, D-50
PRO S) 45 Discrete 2 of 5 D-16, 32, D-54
EAN 13 D-10, 24, D-47

WORKABOUT PRO3 with Windows Mobile 6.1 User Manual I

 Index

EAN 8 D-10, 25, D-47 Bluetooth microphone, adjusting volume

IATA 2 of 5 31 142
Interleaved 2 of 5 D-16, 30, D-53 Bluetooth radio
Matrix 2 of 5 31, D-54 ISM band 201
MSI Plessey D-14, 29, D-51 Bluetooth setup
UPC A D-11, 25, D-48 peripherals 283
UPC E D-11, 26, D-48 Bluetooth setup 201
Translation tab 177 Device tab 204
bar code reader GPRS setup 210
integrated scanner, operation of 280 Mode tab 209
batteries Paired tab 202
a description of 259 Servers tab 208
backup 11 Bluetooth specs 296
battery cover, secure 259 BooSt menu, accessing 31
battery cover, standard version 12 boot (reset) 31
Battery Details tab 165 Built-In Devices tab 166
battery hotkey 64 Built-in Devices tab 166
Battery info. tab 164 built-in microphone, adjusting volume 142
battery power, managing 163 Buttons icon 126
Battery Power tab 148
battery settings 164 C
charging 11, 39 calculator 90
installing 37 calendar 70
installing main battery 12 categories, using 72
main battery 11 creating & editing entries 70
pinouts B-3 deleting appointments 73
removing 37 reminders, creating 71
run time 50 calibrating touchscreen 47
storing 51 Call Options (modem setup) 214
swap time 38 cards, inserting (SIM & SD MMC) 55
battery charger Card Slots tab (Power) 166
safety instructions 262––263 case, carrying 257
battery cover, secure 259 CDMA/1xRTT 227––238
battery cover, standard version 12 certificates 150
battery power, managing 163 charger
battery specifications 296 descriptions of 39
high-capacity (WA3006) 296 safety instructions 262––263
super high-capacity (WA3010) 302 chargers 261
Baud 181, 184 desktop docking station 263
Baud Rate (modem setup) 213 installing at a site 261
beeper operator controls 262
beep conditions 49 quad battery charger (WA3004) 271
volume adjustment 50 single battery 269
Bi-Direction Redundancy D-5 charging (main battery) 11
Block Recognizer 85 Check Char 22, 28, 29, 30
Bluetooth 52 Check Digit 24, 25, 26
pairing devices 52 check digit D-15, 30
Bluetooth devices, pairing 206 Check Digit, One D-15, 30
Check Digits (MSI Plessey) D-15, 30

II WORKABOUT PRO3 with Windows Mobile 6.1 User Manual

 Index

Check Digit Verification D-8, D-45, managing 223

D-46, D-51, D-52, D-53, D-54 modem setup 215
Check Digit Verification (Codabar) network, selecting 224
D-51 network cards, setting up 220
Check Digit Verification (I 2 of 5) D-16 Proxy Server setup 225
cigarette lighter adaptor (automotive VPN, setting up 222
adaptor) 269 connections
cleaning hand-held 57 managing 222
Click Data (scanner double-click) 176 Connections (Internet) 214
Click Time (scanner double-click) connectivity hotkey 63
175 Continuous Scan Mode D-3, D-20, D-43
clock, setting 65, 152 Control Panel
CLSI Editing D-14 Predefined presets C-2
CLSI Library System D-50 Conv. UPC-E To UPC-A D-12
Codabar D-14, 27, D-50 Conv. UPC-E1 To UPC-A D-12
Codabar D-14 Convert To Code 32 D-7
Codablock 37, D-59 Convert To EAN 13 D-16, D-47, D-48
Code Page Convert To UPC -A D-48
Default Local ASCII 177 Copyright information, operating system
ISO-8859-1 Latin 1) 177 147
code page (Data Handling) 177 cradle See also Picker cradle 276
Code 11 29, D-52 credit card, wait for (modem setup) 214
Code 128 D-9, 23, D-45 Custom preset C-1
Code 128 Emulation D-19, D-58
Code 16K 36 D
Code 32, Convert To D-7 Data Bits 181, 185
Code 32 Prefix D-7 Data Bits (modem setup) 213
Code 39 D-6, 22, D-44 data entry modes
Code 49 36 handwriting 99
Code 93 D-13, 27, D-50 typing 99
Code 93 D-13 Data Handling (code page) 177
cold reset to OS (bypass BooSt) 32 Data Matrix, 2D 37
communication date, setting 65
ActiveSync 14, 89 debug (error handling) 153
data transfer 14 Decoded (HHP) Scanner 20
Ethernet connection (desktop dock) Decoded (Internal) Scanner D-2
267 Decoded (internal) scanner parameters
Ethernet connection (quad dock) 273 D-2
Vista 15 Decoded Intermec (ISCP) parameters
WORKABOUT to PC 14, 266 D-42
COM Port Manager 152 decoded scanner D-2
Composite D-18, 34, D-56 Decode Performance D-8, D-10
Concatenation 28 Decode Performance Level D-8, D-10
connecting to a server with 114 Decoding symbology
connection, cancelling (modem) 214 Predefined symbology C-2
Connection Properties (serial modem) 212 Default
Connections 198 Predefined preset C-2, C-3, C-4
editing settings 223 Default identifier
Internet 214 Preset group C-2
WORKABOUT PRO3 with Windows Mobile 6.1 User Manual III
 Index

Default Local ASCII (Code Page) 177 Excel Mobile 90

Delete Char Set ECIs D-6 External GPS 156
desktop docking station (WA4002) 263 External Power tab 149
desktop screen (Today’’s Screen) 61
Device ID tab 146 F
Device tab (Bluetooth) 204 features, WORKABOUT PRO3 4
Dial-String Commands (modem setup) Field Size D-9
214 file, renaming 76
Dial Tone, wait for (modem setup) 214 File Explorer 75, 101
Diff Read Timeout D-44 copy 76
digit copying a file 76
check digit D-15, 30 deleting file 76
Discrete 2 of 5 D-16, 32, D-54 folders, creating 76
Discrete 2 of 5 D-16, 32 renaming file 76
display files & folders, managing 75
backlight, adjusting 47 find (search) 115
docking station flight mode (disabling the WLAN
uploading data using 51 connection) 219
docking stations 261 Flush Mount Pistol Grip, installing 256
desktop docking station 263 FNC1 Conversion D-46
installation at site 261 folder, copying 76
operator controls 262 folder, creating 76
quad dock 273 folder, deleting 76
Dot Time D-2 folder, renaming 76
double-click Full Ascii D-44
appending characters to a decoded Full ASCII (decoded scanner) D-8, 23
bar code 176 Function keys 44
scanner trigger 175
Double-Click, Manage Triggers menu G
159 Games 89
Dr. Debug 153 Glossy surface
DSSS, 802.11b/g radio 292 Predefined preset C-3
Good Scan Beep 176
E GPRS (bluetooth) 210
EAN 13 D-10, 24, D-47 GPS (external) 156
EAN 8 D-10, 25, D-47 Group, preset C-1
EAN-8 Zero Extend D-10 GSM/GPRS 227––238
ECI Decoder D-6 GSM radio 292
email notification 68 GS1-128 D-45
Enable Bookland (UPC-EAN) D-12 GS1 128 (Composite bar code) 34
Enable CC-AB D-18, D-56 GS1-128 GS1 US D-9
Enable CC-C D-18, D-56 GS1-128 Identifier D-45
Enable Plessy D-51 GTIN Compliant D-45, D-49
Enable RSS Expanded D-17, 33, D-56
Enable RSS Limited D-17, 33, D-56 H
Enable RSS-14 D-17, D-56 hand strap 249
Enable TLC-39 D-18, 35 hardware, description of 147
Error Reporting 156 headset, adjusting volume 142
Ethernet card See Network Card 220 headsets, pairing (Bluetooth) 52, 206

IV WORKABOUT PRO3 with Windows Mobile 6.1 User Manual

 Index

Help 82
HHP parameters 20
K
keyboard
high-capacity battery pack (WA3006) 296 alpha keyboard 45
holster, soft shell 257 one shot mode 127
options 136
I QWERTY 45
IATA 2 of 5 31 Scancode remapping 131
Identifier Unicode Mapping 130
Default preset group C-2 keyboard, soft (onscreen) 83
Imager keyboard keys 41, 45
SX5400 specs 315 DEL key, accessing (BKSP) 43
imager (2D) scanner Macro keys 44, 128
scanning modifier keys, locking & unlocking 42
2D 282 modifiers 41
imager model numbers 308 one shot mode 127
imager options 280 punctuation, accessing 43
Imager Settings 173 Scancode Remapping 131
indicators shift-state indicator icon 41, 42, 78
LED functions 49 Unicode Mapping 130
scanner message 282, 283 WORKABOUT PRO3 C 43
softkey bar 78 keypad (phone) 20
inking settings 137 keys
Input Methods 135 alpha keys, accessing 45
Block Recognizer 85, 136
Input Method tab 135 L
Keyboard Options 136 landscape orientation 48
Letter Recognizer 86, 136 Laser On Time D-2, D-20, D-43
soft keyboard 83 LED
Transcriber 84 functions 49
Transcriber options 137 Length Mode D-51, D-53, D-55
input modes Length Restriction (bar code scanning)
handwriting 99 D-8
typing 99 Field Size D-9
integrated scanner option 280 Maximum Size D-9
Intensity tab (backlight) 149 Minimum Size D-9
Interleaved 2 of 5 D-16, 30, D-53 Letter Recognizer 86
internal scanner, decoded D-2 Letter Recognizer options (Input Methods
Internet connection 214 tab) 136
Internet Explorer 110 LIF (Low Insert Force) port pinout B-1
browsing web sites 110 Linear
Internet Sharing 102 Predefined preset C-3
ISBN Conversion 24, D-47 Linear and PDF
ISBT Concat Any Pair D-46 Predefined preset C-3
ISBT Concatenation 23 Linear Decode D-13
ISBT Concat Transmit D-46 Linear Security Level D-4
ISBT 128 D-10, D-46 Linear Transmission only (Decoded
ISM band, Bluetooth radio 201 Composite) D-57
ISO-8859-1 Latin 1 (code page) 177 Linear Transmission only (TLC-39)
D-57
WORKABOUT PRO3 with Windows Mobile 6.1 User Manual V
 Index

linking hand-held to PC 14 Mode, Bluetooth 209

Lock Sequence 134 model numbers, scanner and imager 308
Low light modem setup 215
Predefined preset C-3 Baud Rate 213
Low light near Call Options 214
Predefined preset C-4 Cancel If Not Connected 214
Low power Data Bits 213
Predefined preset C-3 Dial-String Commands 214
Low Power Timeout D-3, D-21, D-43 Parity 213
L1, Set Length D-7 Port Settings 213
L2, Set Length D-7 Server Settings 218
Stop Bits 213
M TCP_IP Settings 218
Macro keys 44 Wait For Credit Card 214
deleting a macro 129 Wait For Dial Tone 214
executing a macro 129 modifier keys 41
Macros menu, accessing 128 locking & unlocking 41
recording and saving 128 One Shot Mode 127
maintenance (of hand-held) 57 shift-state indicator icon 41, 78
mapping Motion
Scancode 131 Predefined preset C-4
Unicode 130 MSI Plessey D-14, 29, D-51
Matrix
Predefined preset C-3 N
Matrix 2 of 5 31, D-54 name, assigning to WORKABOUT PRO3
Maximum Length 22, 24, 27, 28, 29, 30, 146
31, 32, 33, 34, 35, 36, 37, 38, 39, 41, 42 navigation bar 62
Maximum Size D-9 Battery hotkey 64
Memory connectivity hotkey 63
amount available 162 Start button 62
Storage Card tab 163 volume control 64
menus network, selecting 224
pop-up 77 network card
using 77 settings, changing 222
messages setting up 220
Scan Indicator 176 New menu, customizing 74
scanner warning message 176 Note
Scan Result 176 creating 104
Messaging 111 recording a message (audio) 106
folders 111 renaming 106
Outlook email, synchronizing 112 synchronizing 108
Micro PDF-417 D-19, 35, D-58 text, converting handwriting into 104
Microphone, adjusting volume (Built-in, Notes 103
Headset and Bluetooth) 142 Notification, setting 144
Minimum Cancel Time D-3, D-20, D-43 NOTIS Editing D-14
Minimum Length 22, 24, 27, 28, 29, 30,
31, 32, 33, 34, 35, 36, 37, 38, 39, 41, 42, O
D-45, D-47, D-50, D-52, D-54, D-55 Off & On buttons 40
Minimum Size D-9 On & Off button 40

VI WORKABOUT PRO3 with Windows Mobile 6.1 User Manual

 Index

One Check Digit D-15, 30 Plessy Transmit Check Digit D-52

one dimensional internal scanner 281 Pocket Excel
One Shot Mode 127 workbook components 91
One Shot tab (modifier keys) 127 Pocket Word 98
onscreen (soft) keyboard 83 port pinouts B-1, C-1
Options tab (bar codes) 175 portrait orientation 48
orientation, screen 48 port replicator 279
Outlook email, synchronizing (Messaging) Port Replicator Port A (COM5
112 ) 184
Output (Telepen) 32 Baud 181, 184
Owner Information 143 Data Bits 181, 185
ownership information, defining 67 Parity 182, 185
Stop Bits 182, 185
P Trigger On Sequence 182, 185
Paired tab (Bluetooth) 202 Port Replicator Port B (COM6
pairing Bluetooth devices 206 ) 184
Parameter Scanning D-3, 22, 24, 27, 28, Port Replicator Port C (COM7)
29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 184
41, 42, D-43, D-44, D-45, D-46, D-47, ports
D-49, D-50, D-52, D-53, D-54, D-55 LIF (Low Insertion Force) B-1
Parity 182, 185 tether B-2
Parity (modem setup) 213 Port Settings (modem setup) 213
PC, connecting WORKABOUT to 266 PosiCode 33
PC, linking to WORKABOUT 14 Postal
PDF and linear Predefined preset C-3
Predefined preset C-3 Postal
PDF-417 D-18, 35, D-58 Australian 40
Pharmaceutical 22 Canadian 40
phone China 40
keypad 20 Japanese 41
phone keys (on WORKABOUT PRO3 Kix 41
keyboard) 24 Korean 41
using (Windows Mobile 6 PlaNET 39
Professional) 20 PostNET 39
picker cradle Royal 42
installing cable 277 Power 163
Pictures Advanced battery settings 164
deleting 109 Battery Details tab 165
editing 109 Battery tab 164
opening 109 Built-In Devices 166
slide show, creating 109 Built-in Devices tab 166
Pictures and Videos 108 Card Slots tab 166
pinouts B-1, C-1 On Battery Power 164
pistol grip On External Power 164
Flush Mount, installing 256 Suspend Threshold 167
installing 251 Wakeup Keys 168
trigger backplate, installing 253 powering up 12
Plessey Maximum Length 29 Power Mode Decoded (Internal)
Plessey Minimum Length 29 Scanner D-3
WORKABOUT PRO3 with Windows Mobile 6.1 User Manual VII
 Index

Predefined preset C-1 radio specifications 292

All C-2 Raster Expand Rate (2D) D-5
Default C-2, C-3, C-4 Raster Height (2D) D-5
Glossy surface C-3 RA2041 radio specifications 292
Linear C-3 RA3030-G2 GSM radio specifications 292
Linear and PDF C-3 RA3040-G2 (HC25 UMTS Modem radio
Low light C-3 specifications 294
Low light near C-4 Reading Range D-44, D-46, D-49, D-53
Low power C-3 reboot (reset) 31
Matrix C-3 Regional Settings 169
Motion C-4 remapping
Postal C-3 Scancode 131
Predefined presets C-2 Unicode 130
Prefix D-6, D-9 Remote Desktop Mobile 114
Preset Remove Programs 170
Custom C-1 reset 31
Group C-1 resetting the WORKABOUT
Group default identifier C-2 reset 31
Predefined C-1, C-2 resetting the WORKABOUT PRO3
Preset group cold reset 32
Default identifier C-2 RSS Code D-17, 33, D-55
profile, creating backup 187
profile, restoring backup 190 S
profile, viewing backup 191 safety instructions
Programs 80, 89 battery charger 262––263
closing 80 scanner 280
minimizing 80 safety warning, scanner 280
opening 80 Same Read Timeout D-44
properties, WORKABOUT PRO3 147 Same Read Validate D-43
protective case 257 Scan Angle D-5
proxy server, setting up 225 Scancode remapping 131
Scan Data Format D-6
Q Scan Indicator 176
quad battery charger 271 Scan Log File 177
quad dock (WA4204-G2) 273 scanner
QWERTY keyboard one dimensional (1D) internal scanner
alpha keys, accessing 45 281
safety warnings 280
R techniques (scanning) 280
radio troubleshooting tips 281
Bluetooth specs 296 two dimensional (2D) imager scanner
GSM/SPRS/EDGE 292 282
RA2041 radio specifications 292 scanner model numbers 308
RA3030-G2 GSM radio specifications scanner module (SE 955)
292 specs 308
RA3040-G2 UMTS Modem radio scanner options 280
specifications 294 Scanner Settings 174
UMTS modem (Siemens HC25) 294 scanning
802.11b/g Direct Sequence SS 292 Aim Duration D-2

VIII WORKABOUT PRO3 with Windows Mobile 6.1 User Manual

 Index

aiming (target) dot duration D-2 model numbers 308

appending characters 176 NOTIS Editing D-14
Bad Scan Beep 176 Options tab 175
bar code setting 174 PDF-417 D-18
check digit D-15, 30 Prefix D-6
Check Digits (MSI Plessey) D-15, 30 RSS Code D-17
Check Digit Verification D-8 safety instructions 280
Check Digit Verification (I 2 of 5) Scan Data Format D-6
D-16 Scan Indicator 176
Click Data (appending data) 176 Scan Log File 177
Click Time 175 Scan Result 176
CLSI Editing D-14 Scan Result Time 176
Codabar D-14 Security Level D-13
Code 128 D-9, 23, D-45 Security Level (TLC-39) D-57
Code 128 Emulation D-19 Set Length L1 D-7
Code 32 Prefix D-7 Set Length L2 D-7
Code 39 D-6, 22, D-44 specifications 308
Code 93 D-13 Suffix D-6
Composite D-18, D-56 Supp. Redundancy D-12
Conv. UPC-E To UPC-A D-12 Supplementals D-12
Conv. UPC-E1 To UPC-A D-12 target (aiming) dot duration D-2
Convert To Code 32 D-7 TLC-39 D-57
Convert To EAN 13 D-16 Translations tab 177
Data Handling (code page) 177 Transmit Check Digit D-8
Decoded (internal) D-2 Transmit Check Digit (I 2 of 5) D-16
Decoded Intermec (ISCP) D-42 Transmit Check Digit (MSI Plessey)
Decode Perf. Level D-8, D-10 D-15
Decode Performance D-8, D-10 Transmit Code 1D Char D-5
Delete Char Set ECIs D-6 Trioptic Code 39 23
Discrete 2 of 5 D-16 Trioptic Code 39, Enable D-6
Dot Time D-2 UPC-A Check Digit D-11
double-click 175 UPC-A Preamble D-11
EAN-8 Zero Extend D-10 UPC-EAN D-12
ECI Decoder D-6 UPC-EAN Shared Settings 27, D-49
Enable Bookland D-12 UPC-E Check Digit D-11
Enable CC-AB D-18, D-56 UPC-E Preamble D-11
Enable CC-C D-18, D-56 UPC-E1 Check Digit D-11
Enable RSS Expanded D-17 UPC-E1 Preamble D-11
Enable RSS Limited D-17 1D internal 281
Enable RSS-14 D-17 2D UPC Half Block Stitching D-13
Enable TLC-39 D-18, 35 Scanning Mode (2D) D-5
Full ASCII D-8, 23 Scan Result 176
Good Scan Beep 176 Scan Result Time 176
Laser On Time D-2, D-20, D-43 screen
Linear Decode D-13 navigating 61
Linear Transmission only (Decoded stylus 61
Composite) D-57 touch pen 61
Linear Transmission only (TLC-39) scrolling, adjusting speed (Up_Down tab)
D-57 126
Micro PDF-417 D-19 SCU (Summit Client Utility) 16
WORKABOUT PRO3 with Windows Mobile 6.1 User Manual IX
 Index

configuring 17 Sound, setting events 144

Diags (Diagnostics) Tab A-7 Sound settings 143
EAP Credentials A-6 specifications
EAP Types A-4, A-5 for WORKABOUT PRO3 287
Global Settings Tab A-8 SE 955 scanner 308
IP, assigning 16 802.11g 292
Main Tab 17, A-1 Start/Stop Transmit 28, D-44, D-50
Profile Tab A-2 Start button 62
security A-4 Start Menu 74
Status Tab A-7 customising 74
ThirdPartyConfig A-6 customizing 141
Windows Zero Config (WZC) A-6 Stop 213
WLAN, connecting to 16 Stop Bits 182, 185
SD/MMC Card, inserting 55 Stop Bits (modem setup) 213
Search (find) 115 Storage Card tab 163
secure battery cover 259 Strip Leading D-9
Security Level D-13 Strip Start/Stop Chars 22
Security Level (TLC-39) D-57 Strip Trailing D-9
serial modem setup See Connection stylus (touch pen), using 61
Properties 212 Suffix D-6
Server Settings (modem setup) 218 Suffix Char D-9
Server tab (Bluetooth) 208 Summit Client Utility (SCU) 16
Set Length L1 D-7 super high-capacity battery pack
Set Length L2 D-7 (WA3010) 302
Settings 82, 123 Supp. Redundancy (Code 128) D-12
App Launch 124 Supplementals (UPC-EAN) D-12
Buttons 126 Surface
Personal Tab 123 Glossy C-3
App Launch icon 124 Suspend Threshold tab 167
Buttons icon 126 swap time (for battery) 38
One Shot tab 127 switching WORKABOUT PRO3 on 12
Up_Down tab 126 SX5400 imager specs 315
SE 955 scanner specs 308
shift-state indicator, accessing 78 T
shift-state indicator (softkey bar) 78 target dot, duration of D-2
shift-state indicator icon 42 task
SIM card, inserting 55 completed (marking as) 69
single battery charger (WA3001) 269 creating 68
Sled See vehicle cradle. 276 deleting 69
softkey (softkey bar) 78 editing 69
softkey bar notification 68
shift-state indicator 78 sorting 69
softkey 78 Task Manager 171
soft keyboard icon 78 TCP_IP Settings (modem setup) 218
softkeys 78 Teklogix Imagers Settings 173
soft keyboard (onscreen) 83 Teklogix Scanners Settings 174
soft keyboard icon (softkey bar) 78 Telepen 32, D-55
softkeys (softkey bar) 78 Terminal Services Client
Soft Scan Timeout 176 114

X WORKABOUT PRO3 with Windows Mobile 6.1 User Manual

 Index

session, disconnecting (without ending)

114
U
UMTS modem radio 294
session, ending 114 Unicode Mapping 130
tether port pinout B-2 Up_Down tab (scrolling adjustments) 126
Text UPC A D-11, 25, D-48
Block Recognizer 85 UPC-A Check Digit D-11
entering 83 UPC-A Preamble D-11
Letter Recognizer 86 UPC E D-11, 26, D-48
soft keyboard entry 83 UPC-EAN D-12
transcriber, using 84 UPC-EAN Shared Settings 27, D-49
title bar (navigation bar) 62 UPC-E Check Digit D-11
TLC-39 35, D-57 UPC-E Preamble D-11
Today’’s Screen (desktop screen) 61 UPC-E1 Check Digit D-11
appearance of 145 UPC-E1 Preamble D-11
Items (to appear in screen) 145 UPC Half Block Stitching, 2D D-13
Total Recall 186
USB-Ethernet adaptor cable (WA4010)
backup profile, creating 187
267
backup profile, restoring 190
view profile 191
touch pen, using 61
V
vehicle cradle 276
touchscreen
powered 10-55 VDC 276
calibrating 47
powered 12 VDC 276
stylus, using 61 unpowered 276
touch pen, using 61
Version tab 146
touchscreen, aligning (calibrating) 47
Videos and Pictures 108
Transcriber
Vista 15
Inking 137
volume control 64
quick settings 137
VPN connection, setting up 222
Transcriber, using 84
Transcriber (Input Methods tab) 137
Translations parameters (bar codes) 177
W
Wakeup Keys tab 168
Transmit Check Digit D-45, D-47, D-48,
warnings 176
D-51, D-52, D-53, D-54
Windows Mobile 6, navigating in 61
Transmit Check Digit (I 2 of 5) D-16
Windows Zero Config (WZC) A-6
Transmit Check Digit (MSI Plessey)
Wireless WAN 227––238
D-15
WLAN connections, disabling 219
Transmit Code 1D Char D-5
Word Completion tab 139
Transmit Number System 25, 26, D-48
Word Mobile
trigger backplate kit, installing 253
data entry modes 99
trigger mappings 159 Word See Pocket Word 98
Trigger On Sequence 182, 185 WORKABOUT PRO3
Trigger Press Type, Manage Triggers specifications 287
menu 161 WZC (Windows Zero Config) A-6
Trioptic Code 39 23
Trioptic Code 39, Enable D-6
troubleshooting tips (scanning) 281 1D internal scanner 281
turning WORKABOUT PRO3 on 12 2D Aztec 39
TweakIT 193 2D Data Matrix 37
2D imager scanner 282
WORKABOUT PRO3 with Windows Mobile 6.1 User Manual XI
 Index

2D Maxicode 38
2D QR Code 38
2D Raster Expand Rate D-5
2D UPC Half Block Stitching D-13
802.11b/g radio 292

XII WORKABOUT PRO3 with Windows Mobile 6.1 User Manual