Scribd
Upload
126 views

TCU Sript Loading

The document details the process of backing up, resetting to factory settings, downloading new software, and restoring configuration to a TCU device. Key steps include: 1) Backing up the TCU configuration file to an SFTP server. 2) Resetting the TCU to factory defaults. 3) Downloading a new software file from the SFTP server to the TCU. 4) Activating the new software and restoring the backed up configuration.

Uploaded by

anil
Copyright
© © All Rights Reserved
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
126 views

TCU Sript Loading

The document details the process of backing up, resetting to factory settings, downloading new software, and restoring configuration to a TCU device. Key steps include: 1) Backing up the TCU configuration file to an SFTP server. 2) Resetting the TCU to factory defaults. 3) Downloading a new software file from the SFTP server to the TCU. 4) Activating the new software and restoring the backed up configuration.

Uploaded by

anil
Copyright
© © All Rights Reserved
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 4

-----------------------------------------------------------------------------------

-----------------------------------------------------------------------------------
-
OSmon> uselocalsftp on
OperationSucceeded

OSmon> startsession tcu


OperationSucceeded

OSmon> backup tcu sftp://tcu:[email protected]/tcu_GPSK06.xml root


\\TCU backup\\
OperationSucceeded

OSmon> getsessionstatus tcu


UploadCompleted
OperationSucceeded

OSmon> endsession tcu


OperationSucceeded
-----------------------------------------------------------------------------------
-----------------------------------------------------------------------------------
-
login: admin
Password:hidden
STN CLI - ready
Note: AutoIntegration is running. To abort it use command deleteAiMo

OSmon> uselocalsftp on
OperationSucceeded

OSmon> startswsession tcu


OperationSucceeded

OSmon> resettofactorysetting

Warning: All user setting will be removed,


(ok/cancel)? ok

OperationSucceeded

OSmon>endswsession tcu
Operationsucceeded
-----------------------------------------------------------------------------------
-----------------------------------------------------------------------------------
Login Putty again
-----------------------------------------------------------------------------------
-----------------------------------------------------------------------------------
login: admin
Password:
STN CLI - ready
Note: AutoIntegration is running. To abort it use command deleteAiMo

OSmon> deleteAimo
OperationSucceeded

OSmon> uselocalsftp on
OperationSucceeded
OSmon> startswsession tcu
OperationSucceeded

OSmon> downloadsw tcu sftp://tcu:[email protected]/tcu02_sw_T16B.tar


\\tcu software loadind\\
OperationSucceeded

OSmon> getswsessionstatus tcu


DownloadInProgress
OperationSucceeded

OSmon> getswsessionstatus tcu


DownloadInProgress
OperationSucceeded

OSmon> getswsessionstatus tcu


DownloadCompleted
OperationSucceeded

OSmon> activatesw tcu


OperationSucceeded

-----------------------------------------------------------------------------------
-----------------------------------------------------------------------------------
-
unit will take restart
-----------------------------------------------------------------------------------
-----------------------------------------------------------------------------------
-
login: admin
Password:
STN CLI - ready
Note: AutoIntegration is running. To abort it use command deleteAiMo

OSmon> deleteAimo
OperationSucceeded

OSmon> uselocalsftp on
OperationSucceeded

OSmon> startsession tcu


OperationSucceeded

OSmon> download tcu sftp://tcu:[email protected]/tcu_GPSK06.xml \\tcu


script loading\\
OperationSucceeded

OSmon> getsessionstatus tcu


DownloadCompleted
OperationSucceeded

OSmon> restore tcu root \\for tcu


backup restore\\
OperationSucceeded

OSmon> activate tcu \\for tcu


script restore \\
OperationSucceeded
TCU_GTOK08-OSmon> getneighbors
Neighbor cache for VRF 0
IpAddress Interface Li
nkLayerAddress IPv6Router State
100.81.117.145 STN=0,VLANGroup=WAN1-VG,VLAN=eNB_W 54
:1e:56:b9:cb:8f N/A REACHABLE
- AN_S1U -
- -
10.170.70.17 STN=0,VLANGroup=WAN1-VG,VLAN=IuB_D -
N/A INCOMPLETE
- ata_2 -
- -
100.81.44.153 STN=0,VLANGroup=eNB-VG,VLAN=Signal 90
:38:09:a3:dd:bd N/A REACHABLE
- ling -
- -
100.81.93.145 STN=0,VLANGroup=WAN1-VG,VLAN=eNB_W 54
:1e:56:b9:cb:8f N/A REACHABLE
- AN_S1C -
- -
100.81.37.145 STN=0,VLANGroup=eNB-VG,VLAN=Data 90
:38:09:a3:dd:bd N/A REACHABLE
100.81.69.145 STN=0,VLANGroup=eNB-VG,VLAN=OAM 90
:38:09:a3:dd:bd N/A REACHABLE
10.170.70.1 STN=0,VLANGroup=WAN1-VG,VLAN=Abis_ 54
:1e:56:b9:cc:dc N/A REACHABLE
- Data_1 -
- -
10.170.70.9 STN=0,VLANGroup=WAN1-VG,VLAN=MuB_O 54
:1e:56:b9:cc:dc N/A REACHABLE
- AM_1 -
- -
10.170.70.5 STN=0,VLANGroup=WAN1-VG,VLAN=IuB_D 54
:1e:56:b9:cc:dc N/A REACHABLE
- ata_1 -
- -
10.170.85.146 STN=0,VLANGroup=NB-VG,VLAN=IUB a4
:a1:c2:3b:ae:90 N/A REACHABLE
10.170.70.13 STN=0,VLANGroup=WAN1-VG,VLAN=Abis_ -
N/A FAILED
- Data_2 -
- -
10.170.85.150 STN=0,VLANGroup=NB-VG,VLAN=MUB a4
:a1:c2:3b:ae:90 N/A REACHABLE
10.170.70.21 STN=0,VLANGroup=WAN1-VG,VLAN=MuB_O -
N/A FAILED
- AM_2 -
- -

OperationSucceeded

TCU_GTOK08-OSmon> TCU_GTOK08-OSmon> getneighbors


Neighbor cache for VRF 0
IpAddress Interface
LinkLayerAddress IPv6Router State
100.81.117.145 STN=0,VLANGroup=WAN1-VG,VLAN=eNB_W
54:1e:56:b9:cb:8f N/A REACHABLE
- AN_S1U -
- -
10.170.70.17 STN=0,VLANGroup=WAN1-VG,VLAN=IuB_D -
N/A INCOMPLETE
- ata_2 -
- -
100.81.44.153 STN=0,VLANGroup=eNB-VG,VLAN=Signal
90:38:09:a3:dd:bd N/A REACHABLE
- ling -
- -
100.81.93.145 STN=0,VLANGroup=WAN1-VG,VLAN=eNB_W
54:1e:56:b9:cb:8f N/A REACHABLE
- AN_S1C -
- -
100.81.37.145 STN=0,VLANGroup=eNB-VG,VLAN=Data
90:38:09:a3:dd:bd N/A REACHABLE
100.81.69.145 STN=0,VLANGroup=eNB-VG,VLAN=OAM
90:38:09:a3:dd:bd N/A REACHABLE
10.170.70.1 STN=0,VLANGroup=WAN1-VG,VLAN=Abis_
54:1e:56:b9:cc:dc N/A REACHABLE
- Data_1 -
- -
10.170.70.9 STN=0,VLANGroup=WAN1-VG,VLAN=MuB_O
54:1e:56:b9:cc:dc N/A REACHABLE
- AM_1 -
- -
10.170.70.5 STN=0,VLANGroup=WAN1-VG,VLAN=IuB_D
54:1e:56:b9:cc:dc N/A REACHABLE
- ata_1 -
- -
10.170.85.146 STN=0,VLANGroup=NB-VG,VLAN=IUB
a4:a1:c2:3b:ae:90 N/A REACHABLE
10.170.70.13 STN=0,VLANGroup=WAN1-VG,VLAN=Abis_ -
N/A INCOMPLETE
- Data_2 -
- -
10.170.85.150 STN=0,VLANGroup=NB-VG,VLAN=MUB
a4:a1:c2:3b:ae:90 N/A REACHABLE
10.170.70.21 STN=0,VLANGroup=WAN1-VG,VLAN=MuB_O -
N/A INCOMPLETE
- AM_2 -
- -

OperationSucceeded

More TCU commands:-

>getalarmlist tcu alarm check


>restart restatrt tcu
>traceroute 10.39.4.3 to show IP route
>collectDCGInformation to collect tcu log
>getmoattribute complete tcu parameters
>rev get the current sw version

ssh [email protected] command for tcu login

You might also like