Philips Semiconductors Product specification

TrenchMOS transistor BUK9535-55A

Logic level FET BUK9635-55A

GENERAL DESCRIPTION QUICK REFERENCE DATA

N-channel enhancement mode logic SYMBOL PARAMETER MAX. UNIT
level field-effect power transistor in a
plastic envelope available in VDS Drain-source voltage 55 V
TO220AB and SOT404 . Using ID Drain current (DC) 34 A
’trench’ technology which features Ptot Total power dissipation 85 W
very low on-state resistance. It is Tj Junction temperature 175 ˚C
intended for use in automotive and RDS(ON) Drain-source on-state
general purpose switching resistance VGS = 5 V 35 mΩ
applications. VGS = 10 V 32 mΩ

PINNING

TO220AB & SOT404 PIN CONFIGURATION SYMBOL

PIN DESCRIPTION tab d
mb

1 gate

2 drain
2 g
3 source
1 3 1 2 3

tab/mb drain SOT404 TO220AB

s

LIMITING VALUES
Limiting values in accordance with the Absolute Maximum System (IEC 134)
SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT
VDS Drain-source voltage - - 55 V
VDGR Drain-gate voltage RGS = 20 kΩ - 55 V
±VGS Gate-source voltage - - 10 V
±VGSM Non-repetitive gate-source voltage tp≤50µS - 15 V

ID Drain current (DC) Tmb = 25 ˚C - 34 A

ID Drain current (DC) Tmb = 100 ˚C - 24 A
IDM Drain current (pulse peak value) Tmb = 25 ˚C - 133 A
Ptot Total power dissipation Tmb = 25 ˚C - 85 W
Tstg, Tj Storage & operating temperature - - 55 175 ˚C

THERMAL RESISTANCES
SYMBOL PARAMETER CONDITIONS TYP. MAX. UNIT
Rth j-mb Thermal resistance junction to - - 1.8 K/W
mounting base
Rth j-a Thermal resistance junction to in free air 60 - K/W
ambient(TO220AB)
Rth j-a Thermal resistance junction to Minimum footprint, FR4 50 - K/W
ambient(SOT404) board

February 2000 1 Rev 1.000

Philips Semiconductors Product specification

TrenchMOS transistor BUK9535-55A

Logic level FET BUK9635-55A

STATIC CHARACTERISTICS
Tj= 25˚C unless otherwise specified
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
V(BR)DSS Drain-source breakdown VGS = 0 V; ID = 0.25 mA; 55 - - V
voltage Tj = -55˚C 50 - - V
VGS(TO) Gate threshold voltage VDS = VGS; ID = 1 mA 1 1.5 2.0 V
Tj = 175˚C 0.5 - - V
Tj = -55˚C - - 2.3 V
IDSS Zero gate voltage drain current VDS = 55 V; VGS = 0 V; - 0.05 10 µA
Tj = 175˚C - - 500 µA
IGSS Gate source leakage current VGS = ±10 V; VDS = 0 V - 2 100 nA
RDS(ON) Drain-source on-state VGS = 5 V; ID = 25 A - 26 35 mΩ
resistance Tj = 175˚C - - 70 mΩ
VGS = 10 V; ID = 25 A - 24 32 mΩ
VGS = 4.5 V; ID = 25 A - 26.5 38 mΩ

DYNAMIC CHARACTERISTICS
Tmb = 25˚C unless otherwise specified
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
Ciss Input capacitance VGS = 0 V; VDS = 25 V; f = 1 MHz - 880 1173 pF
Coss Output capacitance - 165 198 pF
Crss Feedback capacitance - 111 152 pF
td on Turn-on delay time VDD = 30 V; Rload =1.2Ω; - 6 9 ns
tr Turn-on rise time VGS = 5 V; RG = 10 Ω - 36 55 ns
td off Turn-off delay time - 96 134 ns
tf Turn-off fall time - 73 102 ns
Ld Internal drain inductance Measured from drain lead 6 mm - 4.5 - nH
from package to centre of die
Ld Internal drain inductance Measured from contact screw on - 3.5 - nH
tab to centre of die(TO220AB)
Ld Internal drain inductance Measured from upper edge of drain - 2.5 - nH
tab to centre of die(SOT404)
Ls Internal source inductance Measured from source lead to - 7.5 - nH
source bond pad

REVERSE DIODE LIMITING VALUES AND CHARACTERISTICS

Tj = 25˚C unless otherwise specified
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
IDR Continuous reverse drain - - 34 A
current
IDRM Pulsed reverse drain current - - 133 A
VSD Diode forward voltage IF = 25 A; VGS = 0 V - 0.85 1.2 V
IF = 34 A; VGS = 0 V - 1.1 - V
trr Reverse recovery time IF = 34 A; -dIF/dt = 100 A/µs; - 36 - ns
Qrr Reverse recovery charge VGS = -10 V; VR = 30 V - 0.07 - µC

February 2000 2 Rev 1.000

Philips Semiconductors Product specification

TrenchMOS transistor BUK9535-55A

Logic level FET BUK9635-55A

AVALANCHE LIMITING VALUE

SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
W DSS
1
Drain-source non-repetitive ID = 14 A; VDD ≤ 25 V; - - 49 mJ
unclamped inductive turn-off VGS = 5 V; RGS = 50 Ω; Tmb = 25 ˚C
energy

PD% Normalised Power Derating

120
1000
110
100
ID/A
90
RDS(ON)=VSD/ID tp=
80 100
70 1us

60 10us
50
40 10 100us

30 DC
1ms
20
10ms
10
1
0 1 10 100
0 20 40 60 80 100 120 140 160 180 VSD/V
Tmb / C

Fig.1. Normalised power dissipation. Fig.3. Safe operating area. Tmb = 25 ˚C

PD% = 100⋅PD/PD 25 ˚C = f(Tmb) ID & IDM = f(VDS); IDM single pulse; parameter tp

ID% Normalised Current Derating Zth/(K/W)

120 10
110
0.5
100
90 0.2
80 1
0.1
70
0.05
60
50 0.02

40 0.1
30 0

20
10
0 0.01
0 20 40 60 80 100 120 140 160 180 1E-07 1E-05 1E-03 1E-01 1E+01
Tmb / C t/s

Fig.2. Normalised continuous drain current. Fig.4. Transient thermal impedance.

ID% = 100⋅ID/ID 25 ˚C = f(Tmb); conditions: VGS ≥ 5 V Zth j-mb = f(t); parameter D = tp/T

1 For maximum permissible repetitive avalanche current see fig.18.

February 2000 3 Rev 1.000

Philips Semiconductors Product specification

TrenchMOS transistor BUK9535-55A

Logic level FET BUK9635-55A

VGS/V = 70
100 10.0 7.5
7.0
6.5 ID/A
ID/A 90 60
6.0
5.5
80
5.0 50
70 4.8
60 4.4 40 o
Tj/C= 175 C
4.0
50 3.8
3.6
30
40 o
3.4 25 C
30 3.2 20
3.0
20 2.8
2.6 10
10 2.4

0 0
0 2 4 6 8 10 0 1 2 3 4 5 6 7
VDS/V VGS/V

Fig.5. Typical output characteristics, Tj = 25 ˚C. Fig.8. Typical transfer characteristics.

ID = f(VDS); parameter VGS ID = f(VGS) ; conditions: VDS = 25 V; parameter Tj

RDS(ON)/mOhm 25
40
gfs/S

20
35

15
VGS/V=
30
3.0 10

3.2
3.4
25 3.6 5
4.0
5.0
0
20 0 5 10 15 20 25 30 35
0 10 20 30 40 50 60 70
ID/A ID/A

Fig.6. Typical on-state resistance, Tj = 25 ˚C. Fig.9. Typical transconductance, Tj = 25 ˚C.

RDS(ON) = f(VGS); conditions: ID = 25 A; gfs = f(ID); conditions: VDS = 25 V

RDS(ON)/mOhm a Rds(on) normalised to 25degC

33 3
32

31 2.5
30

29
2
28

27
1.5
26

25
1
24

23
0.5
22 -100 -50 0 50 100 150 200
3 4 5 6 7 8 9 10
ID/A Tmb / degC

Fig.7. Typical on-state resistance, Tj = 25 ˚C. Fig.10. Normalised drain-source on-state resistance.
RDS(ON) = f(VGS); conditions: ID = 25 A; a = RDS(ON)/RDS(ON)25 ˚C = f(Tj); ID = 25 A; VGS = 5 V

February 2000 4 Rev 1.000

Philips Semiconductors Product specification

TrenchMOS transistor BUK9535-55A

Logic level FET BUK9635-55A

VGS(TO) / V 5
2.5
VGS / V
VDS = 14V
max.
2 4
VDS = 44V

typ.
3
1.5

min.
2
1

1
0.5

0
0
-100 -50 0 50 100 150 200 0 5 10 15 20
Tj / C QG / nC

Fig.11. Gate threshold voltage. Fig.14. Typical turn-on gate-charge characteristics.

VGS(TO) = f(Tj); conditions: ID = 1 mA; VDS = VGS VGS = f(QG); conditions: ID = 25 A; parameter VDS

Sub-Threshold Conduction 100

1E-01
90
IF/A
80
1E-02 70
60 o
2% typ 98% Tj/C= 150 C
1E-03 50
o
25 C
40
1E-04 30
20

1E-05 10
0
0.0 0.5 1.0 1.5 2.0
1E-05 VSDS/V
0 0.5 1 1.5 2 2.5 3

Fig.12. Sub-threshold drain current. Fig.15. Typical reverse diode current.

ID = f(VGS); conditions: Tj = 25 ˚C; VDS = VGS IF = f(VSDS); conditions: VGS = 0 V; parameter Tj

WDSS%
Capacitance / nF 120
2.5
110
100
2.0 90
80
1.5 70
60
Ciss
50
1.0
40
30
0.5
20
Coss 10
Crss
0.0 0
0.01 0.1 1 10 100 20 40 60 80 100 120 140 160 180
VDS/V Tmb / C

Fig.13. Typical capacitances, Ciss, Coss, Crss. Fig.16. Normalised avalanche energy rating.
C = f(VDS); conditions: VGS = 0 V; f = 1 MHz WDSS% = f(Tmb); conditions: ID = 75 A

February 2000 5 Rev 1.000

Philips Semiconductors Product specification

TrenchMOS transistor BUK9535-55A

Logic level FET BUK9635-55A

VDD VDD
+ +
L RD

VDS VDS

VGS
- VGS
-
-ID/100
RG
0 T.U.T. 0 T.U.T.

R 01
RGS
shunt

Fig.17. Avalanche energy test circuit. Fig.19. Switching test circuit.

WDSS = 0.5 ⋅ LID2 ⋅ BVDSS /(BVDSS − VDD )

100

IAV

o
25 C
10

o
Tj prior to avalanche 150 C

1
0.001 0.01 0.1 1 10
Avalanche Time, t AV (ms)

Fig.18. Maximum permissible repetitive avalanche

current(IAV) versus avalanche time(tAV) for unclamped
inductive loads.

February 2000 6 Rev 1.000

Philips Semiconductors Product specification

TrenchMOS transistor BUK9535-55A

Logic level FET BUK9635-55A

MECHANICAL DATA

Dimensions in mm
4,5
Net Mass: 2 g max
10,3
max
1,3
3,7

2,8 5,9
min

15,8
max

3,0 max
3,0
not tinned
13,5
min
1,3
max 1 2 3
(2x) 0,9 max (3x)
0,6
2,54 2,54 2,4

Fig.20. SOT78 (TO220AB); pin 2 connected to mounting base.

Notes
1. Observe the general handling precautions for electrostatic-discharge sensitive devices (ESDs) to prevent
damage to MOS gate oxide.
2. Refer to mounting instructions for SOT78 (TO220) envelopes.
3. Epoxy meets UL94 V0 at 1/8".

February 2000 7 Rev 1.000

Philips Semiconductors Product specification

TrenchMOS transistor BUK9535-55A

Logic level FET BUK9635-55A

MECHANICAL DATA

Plastic single-ended surface mounted package (Philips version of D2-PAK); 3 leads

(one lead cropped) SOT404

E A1

D1 mounting
base

HD

Lp
1 3

b c

e e Q

0 2.5 5 mm

scale

DIMENSIONS (mm are the original dimensions)

D
UNIT A A1 b c D1 E e Lp HD Q
max.

mm 4.50 1.40 0.85 0.64 11 1.60 10.30 2.54 2.90 15.40 2.60
4.10 1.27 0.60 0.46 1.20 9.70 2.10 14.80 2.20

OUTLINE REFERENCES EUROPEAN

ISSUE DATE
VERSION IEC JEDEC EIAJ PROJECTION

98-12-14
SOT404
99-06-25

Fig.21. SOT404 surface mounting package. Centre pin connected to mounting base.

Notes
1. This product is supplied in anti-static packaging. The gate-source input must be protected against static
discharge during transport or handling.
2. Refer to SMD Footprint Design and Soldering Guidelines, Data Handbook SC18.
3. Epoxy meets UL94 V0 at 1/8".

February 2000 8 Rev 1.000

Philips Semiconductors Product specification

TrenchMOS transistor BUK9535-55A

Logic level FET BUK9635-55A

MOUNTING INSTRUCTIONS

Dimensions in mm 11.5

9.0

17.5

2.0

3.8

5.08

Fig.22. SOT404 : soldering pattern for surface mounting.

DEFINITIONS
Data sheet status
Objective specification This data sheet contains target or goal specifications for product development.
Preliminary specification This data sheet contains preliminary data; supplementary data may be published later.
Product specification This data sheet contains final product specifications.
Limiting values
Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one
or more of the limiting values may cause permanent damage to the device. These are stress ratings only and
operation of the device at these or at any other conditions above those given in the Characteristics sections of
this specification is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specification.
 Philips Electronics N.V. 2000
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the
copyright owner.
The information presented in this document does not form part of any quotation or contract, it is believed to be
accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any
consequence of its use. Publication thereof does not convey nor imply any license under patent or other
industrial or intellectual property rights.

LIFE SUPPORT APPLICATIONS

These products are not designed for use in life support appliances, devices or systems where malfunction of these
products can be reasonably expected to result in personal injury. Philips customers using or selling these products
for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting
from such improper use or sale.

February 2000 9 Rev 1.000