Scribd
Upload
2K views

DTC P1346 VVT Sensor (Camshaft Position Sensor) Cir-Cuit Range/Performance Problem

The document is a diagnostic trouble code description for a VVT sensor circuit range/performance problem (P1346) in a 2002 Toyota Echo engine. It indicates that the code is triggered by a deviation between the crankshaft position sensor signal and the VVT sensor signal on bank 1, detected over two drive cycles. The circuit description refers to another VVT sensor code, and the wiring diagram is also found under that other code. The inspection procedure involves first checking the valve timing and chain for issues, then replacing the ECM if the timing check is normal.

Uploaded by

Teguh Priyono
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
2K views

DTC P1346 VVT Sensor (Camshaft Position Sensor) Cir-Cuit Range/Performance Problem

The document is a diagnostic trouble code description for a VVT sensor circuit range/performance problem (P1346) in a 2002 Toyota Echo engine. It indicates that the code is triggered by a deviation between the crankshaft position sensor signal and the VVT sensor signal on bank 1, detected over two drive cycles. The circuit description refers to another VVT sensor code, and the wiring diagram is also found under that other code. The inspection procedure involves first checking the valve timing and chain for issues, then replacing the ECM if the timing check is normal.

Uploaded by

Teguh Priyono
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DI-121

DIAGNOSTICS - ENGINE
DI6VK-01

DTC P1346 VVT Sensor (Camshaft Position Sensor) Cir-


cuit Range/Performance Problem

CIRCUIT DESCRIPTION
Refer to DTC P1345 (VVT Sensor (Camshaft Position Sensor ) Circuit Malfunction) on page DI-1 19.
DTC No. Detection Item Trouble Area
 Mechanical system malfunction (Skipping teeth of timing belt,
Deviation in crankshaft position sensor signal and VVT sensor
P1346 belt stretched)
(bank 1) signal (2 trip detection logic)
 ECM

WIRING DIAGRAM
Refer to DTC P1345 (VVT Sensor (Camshaft Position Sensor ) Circuit Malfunction) on page DI-1 19 for the
WIRING DIAGRAM.

INSPECTION PROCEDURE
HINT:
Read freeze frame data using TOYOTA hand-held tester or OBD II scan tool. Because freeze frame records
the engine conditions when the malfunction is detected, when troubleshooting it is useful for determining
whether the vehicle was running or stopped, the engine warmed up or not, the air-fuel ratio lean or rich, etc.
at the time of the malfunction.

1 Check valve timing (Check for loose and jumping teeth of timing chain)
(See page EM-15 ).

NG Adjust valve timing (Repair or replace


timing chain).

OK

Check and replace ECM (See page IN-29 ).

2002 ECHO (RM884U)

Author: Date: 291

You might also like