Scribd
Upload
690 views1 page

Vehicle Operator's Daily Checklist Template

The daily checklist summarizes the items that a forklift operator must check before each shift. These include inspecting tires, lights, gauges, brakes, fluid levels, attachments, and controls for issues like wear, damage, leaks, or loose/binding parts. Any problems found should be marked and explained, and maintenance notified without operating faulty equipment to ensure safety.

Uploaded by

tiagoscopel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
690 views1 page

Vehicle Operator's Daily Checklist Template

The daily checklist summarizes the items that a forklift operator must check before each shift. These include inspecting tires, lights, gauges, brakes, fluid levels, attachments, and controls for issues like wear, damage, leaks, or loose/binding parts. Any problems found should be marked and explained, and maintenance notified without operating faulty equipment to ensure safety.

Uploaded by

tiagoscopel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Operator’s Daily Checklist

Check each Item Before Start of Each Shift Date: ___________

Check one: Gas/LPG/Diesel Truck Electric Sit-down Electric Stand-up Electric Pallet

Truck Serial Number: ___________________________ Operator: ____________________________ Supervisor's OK: _________________________

Hour meter reading: ____________________________

Check each of the following items before the start of each shift. Let your supervisor and/or maintenance department know of any problem.
DO NOT OPERATE A FAULTY TRUCK. Your safety is at risk.
After checking, mark each item accordingly. Explain below as necessary.

Check boxes as follows: √ OK √ NG; needs attention or repair. Circle problem and explain below.

OK NG Visual Checks OK NG Visual Checks


Tires/Wheels: wear, damage, nuts tight Engine: runs rough, noisy, leaks
Head/Tail/Work Lights: damage, mounting, operation Steering: loose/binding, leaks, operation
Gauges/Instruments: damage, operation Service Brake: linkage loose/binding, stops OK, grab
Operator Restraint: damage, mounting, operation, oily, dirty Parking Brake: loose/binding, operational, adjustment
Seat Brake (if equipped): loose/binding, operational,
Warning Decals/Operator’s Manual: missing, not readable
adjustment
Data Plate: not readable, missing Horn: Operation
Overhead Guard: bent, cracked, loose, missing Backup Alarm (if equipped): mounting, operation
Load Back Rest: bent, cracked, loose, missing Warning Lights (if equipped): mounting, operation
Forks: bent, worn, stops OK Lift/Lower: loose/binding, excessive drift, leaks
Engine Oil: level, dirty, leaks Tilt: loose/binding, excessive drift, "chatters," leaks
Hydraulic Oil: level, dirty, leaks Attachments: mounting, damaged, operation, leaks
Battery Test (electric trucks only): indicator in green
Radiator: level, dirty, leaks
while holding full forward tilt
Fuel: level, leaks Control Levers: loose/binding, freely return to neutral
Battery: connections loose, charge, electrolyte low Directional Control: loose/binding, find neutral OK
Covers/Sheet metal: damaged, missing
Brakes: linkage, reservoir fluid level, leaks debris on floor

Explanation of problems marked above:

You might also like