Spesifikasi Material Fasson

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

t-

FACESTOCK
with
smooth and
M20206
A homogenously pigmented white polyester facestock a
absorbent ink-receptive top coat featuring excellent tear strength, heat lssue Date: May,2016
resistance, dimensional stability, opicity and chemical resistance'

. caliper 50 pm (110%) lso 534


. Basisweight 7tglmz(110%) lso536 Fasson'2M White PET TC3|S2O45?|BG4o#WH lmp

ADHESIVE
S2O45P is a high performance permanent adhesive featuring good initial tack
and ultimate bond strength to a wide range of substrates' Product Construction
TINER
A super-calendered white glassine paper with excellent roll label converting
properties.

. caliper 53 pm (t107d lso 534


. Basis weight 52 clmz (* 10%) lso 536

TYPICAL PERFORMANCE DATA (N/25mm)


. LoopTack 20 FIM 9
. 24 hrs 90'Peel 11 FTM 2
. Min Application Temp 5'C
. Service Temp Range After 24hrs -20'C- +70'C
ADHES]VE PERFORMANCE
this is an excellent, high performance industrial grade adhesive, featuring high
initial tack, ultimate adhesion. S2045P is suitable for use in a wide range of
durable labeling application which do not need extremely high temperature
resistance, The adhesive also in compliance with German BgW
recommendations for use in direct contact with dry and moist, non-fatty
food. BG4O#WH lmp

APPLICATION AND UsE


It can be bar coding printed with the right ribbon. But the label without a
RoHS/RE6 U LATION 20021 95 I EU
lamination should avoid to touch with alcohol, toluene, gasoline and
The substances listed in article 4 lid 1 of 2002/95/EU
isopropanol.
(RoHS) are not intentionally used in this product. The
concentration limits of these substances will not exceed
coNvERsroN/PRINTING the set maximum concentration limits as provided in the
This product can be printed by flexo, letterpress, and silk screen. lnk/ribbon proposed amendment f or 2OO2l95lEU.
testing is always recommended before production. This product can be die cut
and stripped at high speeds on most web-fed presses. Harden treated and sharp
dies is recommended, SHELF tIFE
Unless specified othenarise in this document, one year

STATEMENT OF PRACTICAL USE: when st<ired at 23'C t


2'C at 50 * 5% RH

As with all pressure sensitiye materials, this product should be tested thoroughly
under end-use conditions to ensure it meets the requirements of the specific
N.B. : All data to be considered as typical values.
application.
Warranty
All statements, technical lnformation and recommendations about AVERY DENNISON products are based upon tests believedto be reliable but do not constitute a Suarantee
or
purposes. AVERY
warranty. All AVERY DENNTSON products are sold with the understanding that PURCHASER has ind€pendently determlned the suitability of such products for its
product shown to the satisfaction of
Dfruruts6N produ*s are warranted to be free of defecti in material or workmanship for a period of one year from the date of $hipment. Any

damages.
EXCEPT AS sET FORTH ABOVE
NO EXPRESS WARRANTIES AND NO IMPLIED WARRANTIES, WHETHER OF MERCHANTIBILITY OR FITNESS FOR ANY PARTICUI.AR UsE, OR OITIERWISE,
(wHtcH ts MADE EXpRESSLY tN LtEU OF At L OTHER WARRANTJES) SHA| t AppLy TO pRoDUgrS sorD BY AVERY DENNISON. AVERY OENNISON SPECIFICALLY 0lSClAlMS AND EXCLUDES
MADE IN WRITIN6 AND SIGNED BY
ALt OTHER SUCH WARRANIIEs. NO WAIVER, ATTERATION, ADDITION OR MODIFICATION OF THE FORE6OING CONDITIONS SHALL BE VALID UNIESS
AN EXECUTIVE OFFICER OF AVERY DENNISON.
No salesman, representative, or agent of AVERY DENNISON is authorized to give any guarantee, warranty or make any representation
contrary to the above'

You might also like