Scribd
Upload
2K views2 pages

Viva Questions - Dom

The document contains questions to prepare for a viva examination on dynamics of machinery (DOM). It covers 5 modules related to governors, gyroscopes, vibration, damping, and forced vibration. Some of the key topics included are the function and classification of governors, gyroscopic effects on ships and vehicles, definitions and causes of vibration, types of damping, and forced vibration analysis. The questions range from defining and explaining concepts to deriving equations and discussing practical applications.

Uploaded by

Dyggdgd
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views2 pages

Viva Questions - Dom

The document contains questions to prepare for a viva examination on dynamics of machinery (DOM). It covers 5 modules related to governors, gyroscopes, vibration, damping, and forced vibration. Some of the key topics included are the function and classification of governors, gyroscopic effects on ships and vehicles, definitions and causes of vibration, types of damping, and forced vibration analysis. The questions range from defining and explaining concepts to deriving equations and discussing practical applications.

Uploaded by

Dyggdgd
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Questions to prepare for DOM Viva

Module 1

1. Function of governor
2. Classification of governor
3. Define height, radius of rotation, mean, min and max equilibrium speed and sleeve lift
for governor
4. Define governor effort and power
5. Draw FBD of porter and hartnell governor
6. Difference between porter and hartnell
7. Draw FBD of hartnell at mean, min and max position
8. What is sensitiveness, stability, isochronism and hunting of governor.
9. What is controlling force in case of governor
10. Formulae of porter and hartnell.
11. Define gyroscope
12. Equation of gyroscopic couple with meaning of each term
13. Gyroscopic effect on ships, aeroplanes and two wheelers with vector diagrams
14. Gyroscopic effect on ships during steering, pitching and rolling with couple
equations.
15. Equation for gyroscopic acceleration
16. Angle of heel for two wheelers?

Module 3

1. Define and explain phenomenon of vibration


2. Causes and effects of vibration
3. Importance of vibration study
4. Steps in vibration analysis
5. Good and bad examples of vibration
6. Methods to reduce vibration
7. Definitions of frequency, time period, periodic motion, SHM, amplitude, wavelength,
natural frequency, degrees of freedom, damping, phase difference, resonance.
8. Types of vibration with its explanation (all types)
9. Elements of vibratory model.
10. Methods to analyse vibratory problems (Equillibrium, Energy and Rayleighs method)
11. Deriving 𝜔 = 𝑟𝑜𝑜𝑡( ) using any/all methods for a basic spring mass system
12. Springs in series, parallel.
13. Practical applications where springs in series, parallel are used.
14. Natural frequency of simple pendulum
15. Basic numericals of all types covered.
16. Longitudinal, transverse and torsional vibration natural frequency with examples.
17. Obtaining K from deflection.
18. Deflection of cantilever, simply supported beam and UDL

Compiled by: Arti V


Module 4

1. Types of damping
2. Viscous damper works on which law.
3. Rate of decay of amplitude for viscous and coloumb damping.
4. Define damping co-efficient, damping factor, logarithmic decrement, Delta of
coloumb damping, units of all.
5. Cases of damping factor, with its response equation and graph of amplitude vs time
6. Damped frequency?
7. Dampers in series, parallel.
8. For which cases of damping factor will motion be aperiodic?
9. Practical applications of underdamping, overdamping and critical damping?
10. Difference between viscous and coloumb damping

Module 5

1. Forced vibration amplitude and phase angle for all four cases.
2. Define Magnification factor
3. Plot of M.F. vs. r, Phase angle vs r. conclusions drawn.
4. What is static deflection?
5. Draw polygon representing forced in forced vibratory system
6. Define transmissibility and isolation
7. Materials of isolators.
8. Define T.R.
9. Plot of T.R. vs r and its conclusions
10. Principle of vibration measuring devices
11. Name devices used to measure vibration with its equations
12. Plot of vibrometer and accelerometer with conclusions
13. Difference between peak frequency and resonant frequency
14. Justify use of vibrometer/accelerometer for different values of r or zeta
15. Difference of vibrometer and accelerometer
16. What is motion transmissibility and force transmissibility?

Compiled by: Arti V

You might also like