Scribd Logo
Upload

Welcome to Scribd!

  • 165 views

    Intermittent Rail Support Soleplates - Gantrex

    Uploaded by

    Erc Nunez V
    rail

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Intermittent Rail Support Soleplates - Gantrex

    Uploaded by

    Erc Nunez V
    165 views2 pages
    rail

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    rail

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    165 views2 pages

    Intermittent Rail Support Soleplates - Gantrex

    Uploaded by

    Erc Nunez V
    rail

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Steel Soleplate

    For Discontinuous Rail Support

    A Member of the GANTRY GROUP

    FEATURES:

    • Pre-assembled with studs or welded lower components


    • Pre-drilled for two or four anchor bolts
    • Pre-coated to customer specification (e.g. primer or hot dip galvanized)
    • Standard or custom designed to suit all rails

    -1-

    -1-
    GANTREX STEEL SOLEPLATE

    STANDARD SOLEPLATES:

    RAIL FLANGE
    SOLEPLATE DIMENSIONS (ins) THICKNESS ANCHOR
    SIZE WIDTH
    MODEL NO. (STANDARD) BOLT DIA.
    (Ibs/yd) (ins) (mm) D L M X Y
    30 ASCE 3 1/8 80 B2 STELCAM 9-AS30 7/8” 6 3/8 9 6 4 1/2 1/2” 5/8”
    W2 WELDLOK 15-AS30 “ 6 3/8 9 6 4 1/2 “ “
    40 ASCE 3 1/2 89 B2 STELCAM 9-AS40 “ 6 3/8 9 6 4 1/2 “ “
    W2 WELDLOK 15-AS40 “ 6 3/8 9 6 4 1/2 “ “
    60 ASCE 4 1/4 108 B2 STELCAM 9-AS60 “ 6 3/8 9 6 1/2 4 1/2 “ “
    W2 WELDLOK 15-AS60 “ 6 3/8 9 1/2 6 1/2 4 1/2 “ “
    85 ASCE 5 3/16 132 B2 STELCAM 13-AS85 “ 6 3/8 11 8 4 1/2 “ “
    W2 WELDLOK 24-AS85 “ 8 1/2 12 9 1/2 6 1/2 “ “
    104 CR 5 127 82 STELCAM 17-CR104 1” 8 1/2 12 9 6 3/4” 3/4”
    B4 STELCAM 17-CR104 “ 9 3/4 12 9 7 “ “
    W2 WELDLOK24-CR104 “ 8 1/2 12 9 6 “ “
    W4 WELDLOK 24-CR104 “ 9 3/4 12 9 7 “ “
    105 CR 5 3/16 132 B2 STELCAM 17-CR105 “ 8 1/2 12 9 6 “ “
    B4 STELCAM 17-CR105 “ 9 3/4 12 9 7 “ “
    W2 WELDLOK 24-CR105 “ 8 1/2 12 9 6 “ “
    W4 WELDLOK 24-CR105 “ 9 3/4 12 9 7 “ “
    135 CR 5 3/16 132 B2 STELCAM 17-CR135 “ 8 1/2 12 9 6 “ “
    B4 STELCAM 17-CR135 “ 9 3/4 12 9 7 “ “
    W2 WELDLOK 24-CR135 “ 8 1/2 12 9 6 “ “
    W4 WELDLOK 24-CR135 “ 9 3/4 12 9 7 “ “
    B = Bolted Clip W = Welded Clip

    OTHER RAILS: GANTREX soleplates are available to suit any rail size. If rail size is not shown in
    above table, consult your nearest GANTREX office.

    NON-STANDARD: Available with removable jacking bolts upon request. For unusual applications e.g., if
    side thrust on the rail is more than 15% of the vertical wheel load, or if side rollers are
    to be used, consult your nearest GANTREX office for custom-design.

    OTHER PRODUCTS: Consult GANTREX for information on complete rail system material packages,
    including rails, soleplates, rail clips, rail pads, anchor bolts and epoxy grout.

    GANTREX reserves the right to discontinue or change specifications at any time without prior notice and without incurring any obligation
    whatsoever.

    TOLL FREE: 800 2 GANTREX (800) 242-6873 © GANTREX, 2008


    PRINTED in U.S.A.
    Web site: www.gantrex.com • Email: [email protected]
    Rev. 01/08
    Quality on Track®
    -2-

    You might also like