Datasheet XTRA-N SERIES MPPT Solar Charge Controller

Download as pdf or txt
Download as pdf or txt
You are on page 1of 5

XTRA-N SERIES

MPPT Solar Charge Controller

The XTRA-N series integrate the latest design philosophy, as


the main part which is the solar charge controller can carry
different display units(XDB1/XDS1/XDS2). The limitation
function of the charging power and current and reducing
charging power function automatic improve the stability which
works even connecting oversize PV modules and in high
temperature. Meanwhile, it adopts the water-proof design with
the IP32 class, and increase the professional protection chip
for the communication port, further improving the reliability
and meeting the different application requirements.
Improving the MPPT control algorithm further, XTRA N series
can minimize the maximum power point loss rate and loss
Product models
time, quickly track the maximum power point of the PV array
and obtain the maximum energy from solar modules under
XTRA1206N/XTRA2206N any conditions; and can increase the ratio of energy utilization
in the solar system by 10%-30% compared with a PWM
XTRA1210N/XTRA2210N charging method.
With the adaptive three-stage charging mode based on a
XTRA3210N/XTRA4210N digital control circuit, XTRA N series controllers can
effectively prolong the life-cycle of batteries, significantly
improve the system performance and support all-around
electronic protection functions, including overcharging and
over discharging protection to minimize damages to
components of the system caused by incorrect installation or
system failure at the utmost, and effectively ensure safer and
more reliable operation of the solar power supply system for a
longer service time. This modular solar controller can be
widely used for different applications, e.g., Communication
base stations, household systems, and field monitoring, etc.

Product portfolio

NOTES::Optional LCD display units (XDB1/XDS1/XDS2)


Product naming rule

XTRA 1 2 10 N XDS2

Display unit (XDB1/XDS1/XDS2)

Common Negative system

Max.PV open circuit voltage 100V

System voltage:12/24VDC

Charge/discharge current:1-10A 2-20A 3-30A 4-40A


12V/24V,10A
Product series name

Product Features

• Optional LCD display units (XDB1/XDS1/XDS2) • Ultra-fast tracking speed and guaranteed tracking
• Full-load operation without any drop in capacity efficiency
within the range of working environment • Accurate recognition and tracking of multiple-peaks
temperature maximum power point
• Dustproof and waterproof design with IP32 ★class • Automatic limitation of the charging power and current
International famous brands of ST and IR's • Wide MPP operating voltage range
components of high quality and low failure rate are • Compatible with lead-acid and lithium-ion batteries
used, which can ensure the product’s service life • Battery temperature compensation function
• The communication port adopts professional • Real-time energy statistics function
protection chip, which can provide 5VDC power • Overheating power reduction function
supply, and has over-current and short-circuit • Multiple load work modes
protection. • With RS-485 communication bus interface and
• Advanced MPPT technology, with efficiency no Modbus communication protocol, it is available to
less than 99.5% meet various communication requirements in
• Advanced MPPT control algorithm to minimize the different situations.
maximum power point loss rate and loss time • Monitor and set the parameters via mobile phone
• High quality components, perfecting system APP or PC software
performance, with maximum conversion efficiency • Extensive electronic protection
of 98%

www.epsolarpv.com
Protection

• PV Over Current protection • PV Short Circuit protection


• PV Reverse Polarity protection • Night Reverse Charging protection
• Battery Reverse Polarity protection • Battery Over Voltage protection
• Battery Over Discharge protection • Battery Overheating protection
• Lithium Battery Low Temperature protection • Load Short Circuit protection
• Load Overload protection • Controller Overheating protection
• TVS High Voltage Transients protection

Accessories

Remote Meter(MT50) Logger (eLOG01)


Set the controller parameter via Real-time parameter recording of the
the LCD display product through the RS485
communication mode

Bluetooth adapter
(eBox-BLE-01) WIFI adapter
with 2m communication cable (eBox-WIFI-01)
( for the controller with RS485 with 2m communication cable
port ) ( for the controller with RS485 port )

Communication cable
Remote temperature sensor CC-USB-RS485-150U
RTS300R47K3.81A
(3m) USB to RS485 PC communication
cable (1.5m)

OTG cable(OTG-12CM)
Connect the controller to mobile APP
Electrical Parameters

XTRA XTRA XTRA XTRA XTRA XTRA


Item
1206N 2206N 1210N 2210N 3210N 4210N
System nominal
12/24VDC① Auto
voltage

Rated charge current 10A 20A 10A 20A 30A 40A

Rated discharge
10A 20A 10A 20A 30A 40A
current

Battery voltage range 8~32V

Max. PV open circuit 60V② 100V②


voltage 46V③ 92V③

MPP voltage range (Battery voltage +2V)~36V (Battery voltage +2V)~72V

130W/12V 260W/12V 130W/12V 260W/12V 390W/12V 520W/12V


Max. PV input power
260W/24V 520W/24V 260W/24V 520W/24V 780W/24V 1040W/24V

Self-consumption ≤12mA

Discharge circuit
≤0.23V
voltage drop
Temperature
compensate -3mV/℃/2V (Default)
coefficient④

Grounding Common negative

RS485 interface 5VDC/100mA

USB interface 60S (Default)

①When a lead-acid battery is used, the controller doesn’t the low temperature protection.
②At minimum operating environment temperature
③At 25℃ environment temperature
④When a lithium-ion battery is used, the system voltage can’t be identified automatically.

Environmental Parameters

Working environment temperature◆(100% input and output) -25℃~+50℃(LCD)


-30℃~+50℃(No LCD)
Storage temperature range
-20℃~+70℃
Relative humidity
≤95%, N.C.
Enclosure
IP32★

◆Within the range of working environment temperature, the controller can operate under full load ; but when
its internal temperature exceeds 81℃,the controller will reduce the charging power automatically.
★3-Dustproof:It can prevent any solid foreign objects with the diameter larger than 2.5mm from invading;
2-Waterproof: When tilted for 15°, it still can prevent any water droplets from immerging.
Mechanical Parameters

Item XTRA1206N XTRA2206N XTRA3210N XTRA4210N


XTRA1210N XTRA2210N

Dimension 175×143×48mm 217×158×56.5mm 230×165×63mm 255×185×67.8mm

Mounting dimension 140×134mm 180×149mm 180×159mm 200×176mm

Mounting hole size Φ5mm

Terminal 12AWG(4mm2) 6AWG(16mm2) 6AWG(16mm2) 6AWG(16mm2)

Recommended cable 12AWG(4mm2) 10AWG(6mm2) 8AWG(10mm2) 6AWG(16mm2)

Weight 0.57kg 0.96kg 1.31kg 1.67kg

Certifications

ROHS FCC CE IEC62109:2010 IEC62509:2010

BEIJING EPSOLAR TECHNOLOGY CO.,LTD.


BLDG#18,CO.PARK,NO.8 HEYING ROAD,
CHANGPING DISTRICT,BEIJING,CHINA 102200
Tel: 010-82894856 / 82894896
Fax: 010-82894882
www.epever.com.

You might also like