Functions Limts and Continuity
Functions Limts and Continuity
Functions and Their Graphs - Combining Functions; Shifting and Scaling Graphs -
Trigonometric Functions - Exponential Functions - Inverse Functions and Logarithms. Limit
of a function and limit laws - one sided limits – Continuity - Limits Involving Infinity;
Asymptotes of Graphs
Def: A function f from a set D to a set Y is a rule that assigns a unique (single) element
f (x) Y to each element x D
Let f :D Y be a function, then the set D of all possible input values is called the domain
of the function and the set Y is called codomain of f. The set of all output values of f(x) as x
varies throughout D is called the range of the function.
Note: The range may not include every element in the set Y.
Example:
y x ( , ) [0, )
2
2
1
3 y ( , 0 ) (0, ) ( , 0 ) (0, )
x
4 y x ( , ) [0, )
x
5 y ( , 0 ) (0, ) {-1, 1}
x
1
6 y ( , 0 ) (0, ) (0, )
2
x
The vertical line test for a function:
Every curve in the coordinate plane cannot be the graph of a function. A function f can have
only one value of f(x) for each x in its domain, so no vertical line can intersect the graph of a
function more than once. If a is in the domain of the function the vertical line x = a will
intersect the graph of f at the single point (a, f(a)).
The Vertical line test states that if a vertical line drawn through a graph cuts the graph
at only one point, then the graph is a function.
Also, a circle cannot be the graph of a function, since some vertical lines intersect the circle
twice. But, a semicircle can be a graph of a function as shown below:
.
Surjective (Onto): A function f: A → B is onto (surjective) if every element of B is mapped
by some element of . In other words, no elements exist in B without a pre-image in A.
Combining Functions:
Like numbers, functions can be added, subtracted, multiplied, and divided (except
where the denominator is zero) to produce new functions. If ƒ and g are functions, then for
every x that belongs to the domains of both ƒ and g (that is, for x D( f ) D(g) , we define
functions ƒ + g, ƒ - g, and ƒg by the formulas
(ƒ + g)(x) = ƒ(x) + g(x)
(ƒ - g)(x) = ƒ(x) - g(x)
(ƒg)(x) = ƒ(x)g(x).
Notice that the + sign on the left-hand side of the first equation represents the operation of
addition of functions, whereas the + on the right-hand side of the equation means addition of
the real numbers ƒ(x) and g(x).
At any point of D(ƒ) ∩ D(g) at which g(x) ≠ 0, we can also define the function ƒ/g by the
f f (x)
formula (x) (where g(x) ≠ 0).
g g (x)
Functions can also be multiplied by constants: If c is a real number, then the function
cƒ is defined for all x in the domain of ƒ by (cƒ)(x) = cƒ(x).
Composite Functions:
Composition is another method for combining functions.
Def: If f and g are functions, the composite function f g (“f composed with g”) is defined
by (f g )( x ) f ( g ( x )) . The domain of f g consists of the numbers x in the domain of g
for which g(x) lies in the domain of f.
A composite function f g uses the output
g(x) of the first function g as the input for
the second function f.
Note: To evaluate the composite function
g f (when defined), we find f(x) first and
then g(f(x)).
Note: The functions f g and g f are
usually quite different
( f g )(x)=f(g(x))= x 1 1,
(g f )(x)=g(f(x))= x 1 0,
( f f )(x)=f(f(x))= x x
1/ 4
0,
(g g )(x)=g(g(x))=g(x)+1=(x+1)+1=x+2 ,
Example:
y (x 2)
2
And, shifts the graph 2 units to the right.
Limit of a function:
The idea behind limits is to analyze what the function is "approaching" when x
"approaches" a specific value. To start getting used to this idea, let's turn to this graph:
Notation: If we let the arrow symbol represent the word approach, then the symbolism
indicates that x approaches to a number a from the left, i.e., through numbers that are
less than a, and
indicates that x approaches to a number a from the right, i.e., through numbers that
are greater than a.
Finally, the symbol signifies that x approaches a from both sides, i.e., from the left
and right sides of a on a number line.
One-sided-limit: In general, if a function f(x) can be made arbitrarily close to a number L1 by
taking x sufficiently close to, but not equal to, a number a from the left, then we write
.
The number L1 is said to be the left-hand limit of f(x) as x approaches a. Similarly, if f(x) can
made arbitrarily close to a number L2 by taking x sufficiently close to, but not equal to, a
number a from the right, then L2 is the right-hand limit of f(x) as x approaches a and we write
.
These right and left side limits are known as one-sided-limit.
and
Then, we say that L is the limit of f(x) as x approaches a and write
.
This is known as two-sided limit.
and
And consequently .
Example: The graph of the greatest integer function or floor function ( greatest
integer less than or equal to x) is given below:
We can see from the graph, for each integer n does not exist.
and .
Is shown below:
From the graph, it appears that x approaches 5 through numbers less than 5 that
Limit Laws: To calculate limits of functions that are arithmetic combinations of functions
having known limits, we have following rules:
Continuity:
A function f(x) is said to be continuous at x=a if
(i) f(a) is defined (ii) lim f ( x ) exists and (iii) lim f ( x ) f ( a )
x a x a
Here, and .
Vertical asymptotes:
5x 8x 3
2
f (x) 1 x
2
3. Obtain the domain and range of .
y 1 x
3
4. Give the resulting equation, if stretched horizontally by a factor of 2.
5. If the equation y 2x 7 is shifted up by 7 units, find the resulting equation.
6. Write the equations if f (x) 2 x , (i) Reflected about the x-axis (ii) Reflected about
the y-axis.
7. Define Limit of function.
t 3t 2
2
8. Find lim
t t 2
2
t1
1 x s in x
9. Find lim
x 0 3 cos x
1 cos
10. Find lim
0 s in 2
11. Define a Continuous function.
12. If f ( x ) x 1 s in x , find at which points, f(x) fail to be continuous?
x 9
2
3x 5x 1
7 2
1
2 x x
15. Find lim
x 3x 7
1
(ii) y 1 2
, stretched horizontally by a factor of 3
x
5. Express the area and perimeter of an equilateral triangle as a function of the triangle’s
side length x.
6. Express the side length of a square as a function of the length d of the square’s
diagonal. Then express the area as a function of the diagonal length.
y 2 x 1
7. Calculate (i) lim (ii) lim
5y 6
2
y 2 x1
y x 3 2
t 3t 2 2 x 5
2 2
f (x)
(i) lim f ( x ) g ( x ) (ii) lim f ( x ) 3 g ( x ) (iii) lim
x c x c x c f (x) g (x)
(iii) lim ( 4 p ( x ) 5 r ( x )) / s ( x )
x 2
x 2 x 2
11. Find (i) lim ( x 3) (ii) lim ( x 3)
x 2 x 2
x 2 x 2
1 cos s in
12. Calculate lim (Hint: lim 1)
0 s in 2 0
s in 3 y c o t 5 y s in
13. Find lim (Hint: lim 1)
y 0 y cot 4 y 0
x x 6
2
, x 3
15. Find whether continuous or not, g (x) x 3
5, , x 3
x 8
3
2 , x 2, x 2
x 4
16. Find whether continuous or not, g ( x ) 3, , x 2
4, , x 2
x 1, x 3
2
17. For what value of a is f (x) continuous at every x?
2 a x , x 3
ax 2b, x 0
2
18. For what values of a and b is g ( x) x 3a b, 0 x 2 continuous at every x?
3 x 5 , x 2
5x 2x 9 x
8 3 3 5
x
19. Find (i) lim (ii) lim
3 x 4x
5
x x 3
x
5
x
x 7
5/3 1/3
4 3x
3
2x
20. Find (i) lim (ii) lim
3x
x 8/5
x
x 9
6
x x
x x 2
2
x s in x 2 x
22. Find the asymptotes to graph of f (x)
x s in x
x 4
2
x 4
2