ME 201 Mechanics of Solids

Course No.
Course Name L-T-P-Credits Year of Introduction

ME 201 MECHANICS OF SOLIDS 3-1-0-4 2016
Course Objectives: The main objectives of this course are
1. To acquaint with the basic concepts of stress and deformation in solids.
2. To practice the methodologies to analyse stresses and strains in simple structural members,
and to
apply the results in simple design problems.
Syllabu
s
Analysis of deformable bodies : stress, strain, material behaviour, deformation in axially loaded
bars, biaxial and triaxial deformation. Torsion of elastic circular members, design of shafts.
Axial force, shear force and bending moment in beams. Stresses in beams: flexure and shear
stress formulae, design of beams. Deflection of beams. Transformation equations for plane state
of stress and strain, principal planes and stresses, Mohr's circle. Compound stresses: combined
axial, flexural
Expected and shear
outcomes: At theloads
end of– the
eccentric loading. will
course students Buckling:
be ableEuler’s
to theory and Rankine’s
formula
1. for columns.
Understand basic concepts of stress and strain in solids.
2. Determine the stresses in simple structural members such as shafts, beams, columns etc. and
apply these results in simple design problems.
3. Determine principal planes and stresses, and apply the results to combined loading case.
Text Books:
1. R. C. Hibbeler, Mechanics of Materials, Pearson Education,2008
2. E. P. Popov, T. A. Balan, Engineering Mechanics of Solids, Pearson Education, 2012
3. R. K. Bansal, Mechanics of solids, Laxmi Publications, 2004
4. P. N. Singh, P. K. Jha, Elementary Mechanics of Solids, Wiley Eastern Limited, 2012
References Books:
1. S. H. Crandal, N. C. Dhal, T. J. Lardner, An introduction to the Mechanics of Solids, McGraw
Hill, 1999
2. I.H. Shames, J. H. Pitarresi, Introduction to Solid Mechanics, Prentice Hall of India, 2006
3. James M.Gere, Stephen Timoshenko, Mechanics of Materials, CBS Publishers &
Distributors, New Delhi,2012
4. F. Beer, E. R. Johnston, J. T. DeWolf, Mechanics of Materials, Tata McGraw Hill, 2011
5. A. Pytel, F. L. Singer, Strength of Materials, Harper & Row Publishers, New York,1998
Course Plan
Sem.
Module Contents Hours Exam
Marks
Introduction to analysis of deformable bodies – internal forces –
method of sections – assumptions and limitations. Stress – stresses
due to normal, shear and bearing loads – strength design of simple 3
members. Definition of linear and shear strains.
Material behavior – uniaxial tension test – stress-strain diagrams
I concepts of orthotropy, anisotropy and inelastic behavior – Hooke’s 15%
3
law for linearly elastic isotropic material under axial and shear
deformation
Deformation in axially loaded bars – thermal effects – statically
indeterminate problems – principle of superposition - elastic strain 4
energy for uniaxial stress.
Definition of stress and strain at a point (introduction to stress and
strain tensors and its components only) – Poisson’s ratio – biaxial 4
and triaxial deformations – Bulk modulus - Relations between elastic
II constants.
Torsion: Shafts - torsion theory of elastic circular bars – assumptions 15%
and limitations – polar modulus - torsional rigidity – economic cross- 4
sections – statically indeterminate problems – shaft design for
torsional load.
FIRST INTERNAL EXAM
Beams- classification - diagrammatic conventions for supports and
loading - axial force, shear force and bending moment in a beam 2
Shear force and bending moment diagrams by direct approach 3
III 15%
Differential equations between load, shear force and bending
moment. Shear force and bending moment diagrams by summation 5
approach – elastic curve – point of inflection.
Stresses in beams: Pure bending – flexure formula for beams
assumptions and limitations – section modulus - flexural rigidity -
4
IV economic sections – beam of uniform strength. 15%
Shearing stress formula for beams – assumptions and limitations –
design for flexure and shear. 4
SECOND INTERNAL EXAM
Deflection of beams: Moment-curvature relation – assumptions and
limitations - double integration method – Macaulays method -
superposition techniques – moment area method and conjugate beam 6
V ideas for simple cases. 20%
Transformation of stress and strains: Plane state of stress - equations
of transformation - principal planes and stresses. 4
Mohr’s circles of stress – plane state of strain – analogy between
stress and strain transformation – strain rosettes 3
VI .
Compound stresses: Combined axial, flexural and shear loads – 20%
eccentric loading under tension/compression - combined bending 4
and twisting loads.
Theory of columns: Buckling theory –Euler’s formula for long
columns – assumptions and limitations – effect of end conditions - 3
slenderness ratio – Rankin’s formula for intermediate columns.
END SEMESTER EXAM

ME 201 Mechanics of Solids

Uploaded by

Copyright:

Available Formats

ME 201 Mechanics of Solids

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

ME 201 Mechanics of Solids

Uploaded by

Copyright:

Available Formats

Course No.

Course Name L-T-P-Credits Year of Introduction

You might also like