DATA SHEET FOR MANUAL VALVES

XB để xem
0 26/08/19
xét V.D.K K.Q.C L.C.H
XB để xem
A 22/07/19
xét V.D.K K.Q.C L.C.H
Thực Kiểm tra Phê duyệt Kiểm Phê Kiểm tra Phê duyệt
LXB Ngày Mô tả hiện tra duyệt

DK ENGINEERING CA PVCFC
Doc. No.:
DK19-025-PP-DS-001

CÔNG TY CỔ PHẦN TƯ VẤN THIẾT KẾ DK Tổng số trang: 27

KCN ĐÔNG XUYÊN, P. RẠCH DỪA, TP. VŨNG TÀU (Bao gồm trang này)
TEL: 0254 3596 970 - FAX: 0254 3596 566
 MANUAL VALVE DATA SHEET
CLIENT PV GAS CAMAU
CONTRACTOR DK ENGINEERING
PROJECT CA MAU GPP
TITLE VALVE LIST
No. Name Size (Inch) Description Class Unit Rev. Q'ty Remark
FULL BORE, 150#, ASME B16.5, RF FLANGED, ASME B 16.10
LONG PATTERN, ASME B16.34 / MSS SP-72 / BS 5351, SPLIT
OR ONE PIECE BODY, FLOATING BALL TO 6" NPS MAX.;
TRUNNION MOUNTED BALL 8" NPS AND LARGER, ANTI-
1 BALL VALVE 6" 150# EA 0 1 CLASS: BB1
STATIC, FIRE SAFE, BODY / BONNET: FORGINGS - CARBON
STEEL - ASTM A105N / CASTINGS - CARBON STEEL - ASTM
A216 - WCB, BALL: 304(L), STEM/TRUNION: A182 F304 (L),
SEAT RING: PTFE

FULL BORE, 150#, ASME B16.5, RF FLANGED, ASME B 16.10

LONG PATTERN, ASME B16.34 / MSS SP-72 / BS 5351, SPLIT
OR ONE PIECE BODY, FLOATING BALL TO 6" NPS MAX.;
TRUNNION MOUNTED BALL 8" NPS AND LARGER, ANTI-
2 BALL VALVE 14" 150# EA 0 4 CLASS: BB1
STATIC, FIRE SAFE, BODY / BONNET: FORGINGS - CARBON
STEEL - ASTM A105N / CASTINGS - CARBON STEEL - ASTM
A216 - WCB, BALL: 304(L), STEM/TRUNION: A182 F304 (L),
SEAT RING: PTFE
FULL BORE, 800#, FNPT END, IN ACCORDANCE WITH ASME
B1.20.1, ASME B 16.10 LONG PATTERN, ASME B16.34 / MSS
SP-72 / BS 5351, SPLIT OR ONE PIECE BODY, FLOATING
3 BALL VALVE 0.75" 800# EA 0 1 CLASS: BF9
BALL, ANTI-STATIC, FIRE SAFE, BODY / BONNET: SS316,
BALL: SS316 (L), STEM/TRUNION: A182 F316 (L), SEAT RING:
PTFE

FULL BORE, 150#, ASME B16.5, RF FLANGED, ASME B 16.10

LONG PATTERN, ASME B16.34 / MSS SP-72 / BS 5351, SPLIT
4 BALL VALVE 8" OR ONE PIECE BODY, TRUNNION MOUNTED BALL, ANTI- 150# EA 0 4 CLASS: BF9
STATIC, FIRE SAFE, BODY / BONNET: SS316, BALL: SS316
(L), STEM/TRUNION: A182 F316 (L), SEAT RING: PTFE

FULL BORE, 300#, ASME B16.5, RF FLANGED, , ASME B 16.10

LONG PATTERN, ASME B16.34 / MSS SP-72 / BS 5351, SPLIT
OR ONE PIECE BODY, FLOATING BALL, ANTI-STATIC, FIRE
5 BALL VALVE 1" SAFE, BODY / BONNET: FORGINGS - CARBON STEEL - ASTM 300# EA 0 1 CLASS: CB1
A105N / CASTINGS - CARBON STEEL - ASTM A216 - WCB,
BALL: CS+CHROMEPLATED, STEM/TRUNION: 13CR, SEAT
FULL BORE, 300#, ASME B16.5, RF FLANGED, , ASME B 16.10
LONG PATTERN, ASME B16.34 / MSS SP-72 / BS 5351, SPLIT
OR ONE PIECE BODY, FLOATING BALL, ANTI-STATIC, FIRE
6 BALL VALVE 2" SAFE, BODY / BONNET: FORGINGS - CARBON STEEL - ASTM 300# EA 0 1 CLASS: CB1
A105N / CASTINGS - CARBON STEEL - ASTM A216 - WCB,
BALL: CS+CHROMEPLATED, STEM/TRUNION: 13CR, SEAT
FULL BORE, 300#, ASME B16.5, RF FLANGED, , ASME B 16.10
LONG PATTERN, ASME B16.34 / MSS SP-72 / BS 5351, SPLIT
OR ONE PIECE BODY, TRUNNION MOUNTED, ANTI-STATIC,
7 BALL VALVE 8" 300# EA 0 1 CLASS: CB1
FIRE SAFE, BODY / BONNET: CARBON STEEL - ASTM A216 -
WCB, BALL: SS316 (L), STEM/TRUNION: A182 F316 (L), SEAT
RING: SS316 (L) STELLITE SURFACED

MANUFACTURE STANDARD BORE, 150#, RAISED FACE,

DOUBLE FLANGE, ASME B 16.10 / API 609, ASME B16.34 / API
CENTERLINE
8 8" 609, RESILIENT SEAT & LINER, NON-LUG DESIGN, 150# EA 0 4 CLASS: BB1
BUTTERFLY VALVE
CONCENTRIC DISC, , BODY / BONNET: A216 WCB, DISC:
A216 WCB, STEM: 13CR, SEAT RING: RUBBER

MANUFACTURE STANDARD BORE, 150#, WAFER TYPE /

ASME B16.5, RF FLANGED, ASME B 16.10 / API 609, ASME
B16.34 / API 609, CENTERLINE BUTTERFLY VALVE,
9 BUTTERFLY VALVE 14" 150# EA 0 1 CLASS: BF9
CONCENTRIC DISC, ANTI STATIC, FIRESAFE, ADJUSTABLE
PACKING, REPLACEABLE SEAT, BODY / BONNET: SS 304(L),
DISC: SS 304(L), STEM: A182 F304(L), SEAT RING: PTFE

DATA SHEET No.

DK19-025-PP-DS-001
0 26/Aug/19 ISSUED FOR REVIEW VĐK KQC LCH
A 22/Jul/19 ISSUED FOR REVIEW VĐK KQC LCH
PAGE 2 OF 27 REV:0
REV DATE DESCRIPTION BY CHECK APPROVAL CLIENT APP.
 MANUAL VALVE DATA SHEET
CLIENT PV GAS CAMAU
CONTRACTOR DK ENGINEERING
PROJECT CA MAU GPP
TITLE VALVE LIST
No. Name Size (Inch) Description Class Unit Rev. Q'ty Remark

STANDARD BORE, 150#, ASME B16.5, RF FLANGED, ,

ASME B 16.10, ASME B16.34 / API 594, SWING TYPE,,
SWING CHECK
10 14" HORIZONTAL PATTERN, BOLTED CAP, FLOW DIRECTION, 150# EA 0 1 CLASS: BF9
VALVE
BODY: SS 304L, DISC / PLATE: SS 304L, SEAT RING: SS
304L,
STANDARD BORE, 800#, 2 END PUP PIPE, PLAIN, SCH
40S, SUITABLE FOR BW & SW, FINISH TO ASME B16.11, 2
END EXTENDED WELD END, 100mm., ASME B16.34 / API
11 PISTON CHECK VALV 0.75" 594, PISTON LIFT TYPE, HORIZONTAL PATTERN, BOLTED 800# EA 0 1 CLASS: CB1
CAP, FLOW DIRECTION, BODY: ASTM A105, DISC / PLATE:
13 CR, SEATS: SS316 (L) STELLITE SURFACED, SPRING:
N/A
STANDARD BORE, 300#, ASME B16.5, RF FLANGED, ,
ASME B 16.10, ASME B16.34 / API 594, SWING TYPE,
12 SWING CHECK VALVE 4" HORIZONTAL PATTERN, BOLTED CAP, FLOW DIRECTION, 300# EA 0 2 CLASS: CB1
BODY: ASTM A216 GR. WCB, DISC / PLATE: 13 CR, SEATS:
SS316 (L) STELLITE SURFACED, SPRING: N/A

STANDARD BORE, 300#, ASME B16.5, RF FLANGED, ,

ASME B 16.10, ASME B16.34 / API 594, SWING TYPE,
13 SWING CHECK VALVE 8" HORIZONTAL PATTERN, BOLTED CAP, FLOW DIRECTION, 300# EA 0 1 CLASS: CB1
BODY: ASTM A216 GR. WCB, DISC / PLATE: 13 CR, SEATS:
SS316 (L) STELLITE SURFACED, SPRING: N/A

STANDARD BORE, 600#, ASME B16.5, RF FLANGED, ,

ASME B 16.10, ASME B16.34 / API 594, SWING TYPE,,
14 SWING CHECK VALVE 6" HORIZONTAL PATTERN, BOLTED CAP, FLOW DIRECTION, 600# EA B 1 CLASS: CE9
BODY: F304, DISC / PLATE: SS316, SEAT RING: SS316
Stellite Surfaced, SPRING: N/A

MANUFACTUER STANDARD BORE, 800#, 2 END PUP PIPE,

PLAIN, SCH 80, SUITABLE FOR BW & SW, FINISH TO
ASME B16.11, 2 END EXTENDED WELD END, 100mm (ALL
SIZES)., ASME B16.34 / API 602, OS&Y, BOLTED BONNET,
15 GATE VALVE 0.75" 800# EA 0 3 CLASS: BB1
SOLID WEDGE / FLEXIBLE WEDGE, RENEWABLE SEATS,
RISING-STEM, BODY / BONNET: ASTM A105N, DISC /
WEDGE: 13CR, STEM: 13CR, SEAT RING: STELLITE
SURFACED

MANUFACTURE STANDARD BORE, 150#, ASME B16.5, RF

FLANGED, , ASME B 16.10, ASME B16.34 / API 600 / API
602, OS&Y, BOLTED BONNET, SOLID WEDGE / FLEXIBLE
16 GATE VALVE 2" 150# EA 0 4 CLASS: BB1
WEDGE, RENEWABLE SEATS, RISING-STEM, BODY /
BONNET: A216 WCB, DISC / WEDGE: 13CR, STEM: 13CR,
SEAT RING: STELLITE SURFACED

MANUFACTURE STANDARD BORE, 150#, ASME B16.5, RF

FLANGED, , ASME B 16.10, ASME B16.34 / API 600 / API
602, OS&Y, BOLTED BONNET, SOLID WEDGE / FLEXIBLE
17 GATE VALVE 4" 150# EA 0 1 CLASS: BB1
WEDGE, RENEWABLE SEATS, RISING-STEM, BODY /
BONNET: A216 WCB, DISC / WEDGE: 13CR, STEM: 13CR,
SEAT RING: STELLITE SURFACED

STANDARD BORE, 800#, 2 END PUP PIPE, PLAIN, SCH

40S, SUITABLE FOR BW & SW, FINISH TO ASME B16.11, 2
END EXTENDED WELD END, 100mm., ASME B16.34 / API
18 GATE VALVE 0.75" 602, OS&Y, BOLTED BONNET, SOLID WEDGE / FLEXIBLE 800# EA 0 1 CLASS: BF9
WEDGE, RENEWABLE SEATS, RISING-STEM, BODY /
BONNET: SS304L, DISC / WEDGE: SS304(L), STEM: A182
F304(L), SEAT RING: SS304(L)

DATA SHEET No.

DK19-025-PP-DS-001
0 26/Aug/19 ISSUED FOR REVIEW VĐK KQC LCH
A 22/Jul/19 ISSUED FOR REVIEW VĐK KQC LCH
PAGE 3 OF 27 REV: 0
REV DATE DESCRIPTION BY CHECK APPROVAL CLIENT APP.
 MANUAL VALVE DATA SHEET
CLIENT PV GAS CAMAU
CONTRACTOR DK ENGINEERING
PROJECT CA MAU GPP
TITLE VALVE LIST
No. Name Size (Inch) Description Class Unit Rev. Q'ty Remark
MANUFACTURE STANDARD BORE, 800#, 2 END PUP PIPE,
PLAIN, SCH 80, SUITABLE FOR BW & SW, FINISH TO
ASME B16.11, 2 END EXTENDED WELD END, 100mm (ALL
SIZES)., ASME B16.34 / API 602, OS&Y, BOLTED BONNET,
19 GATE VALVE 0.5" 800# EA 0 1 CLASS: CB1
SOLID WEDGE / FLEXIBLE WEDGE, RENEWABLE SEATS,
RISING-STEM, BODY / BONNET: ASTM A105N, DISC /
WEDGE: 13CR, STEM: 13CR, SEAT RING: STELLITE
SURFACED
MANUFACTURE STANDARD BORE, 800#, 2 END PUP PIPE,
PLAIN, SCH 80, SUITABLE FOR BW & SW, FINISH TO
ASME B16.11, 2 END EXTENDED WELD END, 100mm (ALL
SIZES)., ASME B16.34 / API 602, OS&Y, BOLTED BONNET,
20 GATE VALVE 0.75" 800# EA 0 19 CLASS: CB1
SOLID WEDGE / FLEXIBLE WEDGE, RENEWABLE SEATS,
RISING-STEM, BODY / BONNET: ASTM A105N, DISC /
WEDGE: 13CR, STEM: 13CR, SEAT RING: STELLITE
SURFACED

MANUFACTURE STANDARD BORE, 800#, 2 END PUP PIPE,

PLAIN, SCH 80, SUITABLE FOR BW & SW, FINISH TO
ASME B16.11, 2 END EXTENDED WELD END, 100mm (ALL
SIZES)., ASME B16.34 / API 602, OS&Y, BOLTED BONNET,
21 GATE VALVE 1" 800# EA 0 3 CLASS: CB1
SOLID WEDGE / FLEXIBLE WEDGE, RENEWABLE SEATS,
RISING-STEM, BODY / BONNET: ASTM A105N, DISC /
WEDGE: 13CR, STEM: 13CR, SEAT RING: STELLITE
SURFACED

MANUFACTURE STANDARD BORE, 800#, 2 END PUP PIPE,

PLAIN, SCH 80, SUITABLE FOR BW & SW, FINISH TO
ASME B16.11, 2 END EXTENDED WELD END, 100mm (ALL
SIZES)., ASME B16.34 / API 602, OS&Y, BOLTED BONNET,
22 GATE VALVE 1.5" 800# EA 0 4 CLASS: CB1
SOLID WEDGE / FLEXIBLE WEDGE, RENEWABLE SEATS,
RISING-STEM, BODY / BONNET: ASTM A105N, DISC /
WEDGE: 13CR, STEM: 13CR, SEAT RING: STELLITE
SURFACED

MANUFACTURE STANDARD BORE, 300#, ASME B16.5, RF

FLANGED, , ASME B 16.10, ASME B16.34 / API 600 / API
602, OS&Y, BOLTED BONNET, SOLID WEDGE / FLEXIBLE
23 GATE VALVE 2" 300# EA 0 3 CLASS: CB1
WEDGE, RENEWABLE SEATS, RISING-STEM, BODY /
BONNET: A216 WCB, DISC / WEDGE: 13CR, STEM: 13CR,
SEAT RING: STELLITE SURFACED

MANUFACTURE STANDARD BORE, 300#, ASME B16.5, RF

FLANGED, , ASME B 16.10, ASME B16.34 / API 600 / API
602, OS&Y, BOLTED BONNET, SOLID WEDGE / FLEXIBLE
24 GATE VALVE 4" 300# EA 0 3 CLASS: CB1
WEDGE, RENEWABLE SEATS, RISING-STEM, BODY /
BONNET: A216 WCB, DISC / WEDGE: 13CR, STEM: 13CR,
SEAT RING: STELLITE SURFACED

MANUFACTURE STANDARD BORE, 300#, ASME B16.5, RF

FLANGED, , ASME B 16.10, ASME B16.34 / API 600 / API
602, OS&Y, BOLTED BONNET, SOLID WEDGE / FLEXIBLE
25 GATE VALVE 6" 300# EA 0 1 CLASS: CB1
WEDGE, RENEWABLE SEATS, RISING-STEM, BODY /
BONNET: A216 WCB, DISC / WEDGE: 13CR, STEM: 13CR,
SEAT RING: STELLITE SURFACED

MANUFACTURE STANDARD BORE, 300#, ASME B16.5, RF

FLANGED, , ASME B 16.10, ASME B16.34 / API 600 / API
602, OS&Y, BOLTED BONNET, SOLID WEDGE / FLEXIBLE
26 GATE VALVE 8" 300# EA 0 1 CLASS: CB1
WEDGE, RENEWABLE SEATS, RISING-STEM, BODY /
BONNET: A216 WCB, DISC / WEDGE: 13CR, STEM: 13CR,
SEAT RING: STELLITE SURFACED

DATA SHEET No.

DK19-025-PP-DS-001
0 26/Aug/19 ISSUED FOR REVIEW VĐK KQC LCH
A 22/Jul/19 ISSUED FOR REVIEW VĐK KQC LCH
PAGE 4 OF 27 REV: 0
REV DATE DESCRIPTION BY CHECK APPROVAL CLIENT APP.
 MANUAL VALVE DATA SHEET
CLIENT PV GAS CAMAU
CONTRACTOR DK ENGINEERING
PROJECT CA MAU GPP
TITLE VALVE LIST
No. Name Size (Inch) Description Class Unit Rev. Q'ty Remark

MANUFACTURE STANDARD BORE, 800#, 2 END PUP PIPE,

PLAIN, SCH 40S, SUITABLE FOR BW & SW, FINISH TO
ASME B16.11, 2 END EXTENDED WELD END, 100mm,
27 GATE VALVE 0.75" ASME B16.34 / API 602, OS&Y, BOLTED BONNET, SOLID 800# EA 0 2 CLASS: CE9
WEDGE / FLEXIBLE WEDGE, RENEWABLE SEATS, RISING-
STEM, BODY / BONNET: SS304, DISC / WEDGE: SS316(L),
STEM: A182 F316(L), SEAT RING: SS316(L)

MANUFACTURE STANDARD BORE, 300#, ASME B16.5, RF

FLANGED, , ASME B 16.10, ASME B16.34 / API 600 / API
602, OS&Y, BOLTED BONNET, SOLID WEDGE / FLEXIBLE
28 GATE VALVE 6" 300# EA 0 3 CLASS: CE9
WEDGE, RENEWABLE SEATS, RISING-STEM, BODY /
BONNET: SS304, DISC / WEDGE: SS316(L), STEM: A182
F316(L), SEAT RING: SS316(L)

MANUFACTURE STANDARD BORE, 600#, ASME B16.5, RF

FLANGED, , ASME B 16.10, ASME B16.34 / API 600 / API
602, OS&Y, BOLTED BONNET, SOLID WEDGE / FLEXIBLE
29 GATE VALVE 8" 600# EA 0 1 CLASS ED1
WEDGE, RENEWABLE SEATS, RISING-STEM, BODY /
BONNET: A217 - WC6, DISC / WEDGE: 13CR + STELLITE,
STEM: 13CR, SEAT RING: 13CR + STELLITE

MANUFACTURE STANDARD BORE, 800#, 2 END PUP PIPE,

PLAIN, SCH 40S, SUITABLE FOR BW & SW, FINISH TO
ASME B16.11, 2 END EXTENDED WELD END, 100mm.,
30 GATE VALVE 1.5" ASME B16.34 / API 602, OS&Y, BOLTED BONNET, SOLID 800# EA B 1 CLASS EE9
WEDGE / FLEXIBLE WEDGE, RENEWABLE SEATS, RISING-
STEM, BODY / BONNET: SS 304, DISC / WEDGE: SS 304L,
STEM: A182 F304L, SEAT RING: SS 304L

MANUFACTURE STANDARD BORE, 2500#, 2 END PUP

PIPE, BW, SCH XXS, SUITABLE FOR BW, FINISH TO ASME
B16.25, 2 END EXTENDED WELD END, 200mm, ASME
B16.34 / API 600 / API 602, OS&Y, BOLTED BONNET,
31 GATE VALVE 6" 2500# EA 0 1 CLASS HD1
SOLID WEDGE / FLEXIBLE WEDGE, RENEWABLE SEATS,
RISING-STEM, BODY / BONNET: A217 - WC9, DISC /
WEDGE: 13CR + STELLITE, STEM: 13CR, SEAT RING:
13CR + STELLITE
STANDARD BORE, 800#, 2 END PUP PIPE, PLAIN, SCH 80,
SUITABLE FOR BW & SW, FINISH TO ASME B16.11, 2 END
EXTENDED WELD END, 100mm., ASME B16.34 / API 623,
32 GLOBE VALVE 0.75" OS&Y BOLTED BONNET, RISING STEM, PLUG OR SEMI- 800# EA 0 1 CLASS: CB1
PLUG DISC, REPLACEABLE PLUG/ DISC & SEAT , BODY /
BONNET: A105, DISC: 13CR, STEM: 13CR, SEAT RING:
STELLITE SURFACED

STANDARD BORE, 300#, ASME B16.5, RF FLANGED, ,

ASME B 16.10, ASME B16.34 / API 623, OS&Y BOLTED
BONNET, RISING STEM, PLUG OR SEMI-PLUG DISC,
33 GLOBE VALVE 2" 300# EA 0 1 CLASS: CB1
REPLACEABLE PLUG/ DISC & SEAT , BODY / BONNET:
A216 WCB, DISC: 13CR, STEM: 13CR, SEAT RING:
STELLITE SURFACED

DATA SHEET No.

DK19-025-PP-DS-001
0 26/Aug/19 ISSUED FOR REVIEW VĐK KQC LCH
A 22/Jul/19 ISSUED FOR REVIEW VĐK KQC LCH
PAGE 5 OF 27 REV: 0
REV DATE DESCRIPTION BY CHECK APPROVAL CLIENT APP.
 MANUAL VALVE DATA SHEET
CLIENT CA MAU FERTILIZER PLANT
CONTRACTOR DK ENGINEERING CONSULTANCY JOINT STOCK COMPANY
PROJECT CO2 RECOVERY SYSTEM IN PERMEATE GAS AND FLASH GAS
TITLE DATA SHEET FOR BALL VALVE
VALVE TYPE: VALVE SIZE (NPS) : PRESSURE / TEMPERATURE RATINGS
#150, FLANGE RF, CARBON STEEL MAX DESIGN TEMP - °C -10 to 38 93 149 204
min. 0.5" max. 24"
BALL VALVE MAX DESIGN PRES - Barg 19 17 15.1 13.1
DESIGN REQUIREMENTS
1 DESCRIPTIONS:
2 VALVE RATING : 150#
o o
3 DESIGN TEMP. RANGE :-10 C MIN TO 120 C MAX
4 BORE : FULL BORE
5 END STYLE / CON'N : ASME B16.5, RF FLANGED (NOTE 3)
6 FACE TO FACE DIM'S :ASME B 16.10 LONG PATTERN
7 PIPING CLASS : BB1
8 VALVE DESIGN STD :ASME B16.34 / MSS SP-72 / BS 5351
9 DESIGN / CONSTRUCT'N :SPLIT OR ONE PIECE BODY
10 :FLOATING BALL TO 6" NPS MAX.; TRUNNION MOUNTED BALL 8" NPS AND LARGER
11 : ANTI-STATIC
12 : FIRE SAFE
13 :REPLACEABLE BALL & SEAT
14 :AUTO BODY CAVITY PRESSURE RELIEF
15 : BLOW OUT PROOF STEM WITH
16 CORROSION ALLOWANCE : 1.6 MM
17 MATERIALS:
18 BODY / BONNET : FORGINGS - CARBON STEEL - ASTM A105N / CASTINGS - CARBON STEEL - ASTM A216 - WCB
19 BALL : 304(L)
20 STEM/TRUNION : A182 F304 (L)
21 SEAT RING : PTFE
22 SEAT INSERTS : VTA (NOTE 4)
23 STEM SEALS/PACKING : PTFE IMPREGNATED FIBRECORD
24 BOLTING : BOLTS -ASTM A193 Gr B7 (HOT-DIPPED GALV.)
25 : NUTS -ASTM A194 GR.2H HEAVY.HEX. (HOT-DIPPED GALV.)
26 OPERATOR : LEVER OPERATOR TO 6"; 8" AND ABOVE GEAR OPERATOR
27 GASKETS : SS 304 WITH GRAPHITE FILLER
28 PAINTING : AS PER 07087-00000-MC08 _ SPECIFICATION FOR PAINTING
29 CERTIFICATION MATERIAL : EN 10204 TYPE: 3.1

30 SPECIAL REQUIREMENTS : N/A

31
32 INSPECTION & TESTING REQUIREMENTS
33 REQ'D INSPECTION & TESTING NOTES
34 VISUAL EXAMINATION (NOTE A) 100% (A) WHERE VISUAL EXAMINATION INDICATES AREAS OF POTENTIAL
35 MAGNETIC PARTICLE EXAMINATION AS REQ'D CONCERN, LPI OR MPI EXAMINATION SHALL BE APPLIED IN
36 LIQUID PENETRANT EXAMINATION (NOTE A) AS REQ'D ACCORDANCE WITH ASME V ARTICLE 6 (LPI) OR ARTICLE 7 (MPI)
37 RADIOGRAPHIC EXAMINATION AS REQ'D
38
39 PRESSURE TEST (NOTE B) AS REQ'D (B) TEST PRESSURES SHALL BE IN ACCORDANCE WITH ASME B16.34
40 AND VALVE INSPECTION & TESTING PROCEDURE SHALL BE AS PER
41 ASME B16.34/ API 598/ API 6D.
42
FIRE SAFE CERTIFICATION TO API 607 /
43 YES
BS6755 PART 2 / BS6755 PART 2
44
45
46 NOTES
47
48 1. VTA: Vendor to advise
49 2. Valve marking shall be in accordance with MSS-SP 25.
50 3. Raised Face (RF) Flange end connections shall have surface roughness between 3,2 µm and 6.3 µm
51 4. Manufacturer shall select seat material to meet the design pressure/ temperature range.
52 5. LO / CSO devices shall be provided for 6" ball valve
53
54

DATA SHEET No.

DK19-025-PP-DS-001
0 26/Aug/19 ISSUED FOR REVIEW VĐK KQC LCH
A 22/Jul/19 ISSUED FOR REVIEW VĐK KQC LCH
PAGE 6 OF 27 REV:0
REV DATE DESCRIPTION BY CHECK APPROVAL CLIENT APP.
 MANUAL VALVE DATA SHEET
CLIENT CA MAU FERTILIZER PLANT
CONTRACTOR DK ENGINEERING CONSULTANCY JOINT STOCK COMPANY
PROJECT CO2 RECOVERY SYSTEM IN PERMEATE GAS AND FLASH GAS
TITLE DATA SHEET FOR BALL VALVE
VALVE TYPE: VALVE SIZE (NPS) : PRESSURE / TEMPERATURE RATINGS
-100 to
#800, FNPT, STAINLESS STEEL MAX DESIGN TEMP - °C 38 93 149 204
min. 0.75" max. 0.75"
BALL VALVE MAX DESIGN PRES - Barg 15.3 13.2 12 11
DESIGN REQUIREMENTS
1 DESCRIPTIONS:
2 VALVE RATING : 800#
3 o o
DESIGN TEMP. RANGE : -10 C MIN TO 75 C MAX
4 BORE : FULL BORE
5 END STYLE / CON'N : FNPT END, IN ACCORDANCE WITH ASME B1.20.1
6 FACE TO FACE DIM'S : ASME B 16.10 LONG PATTERN
7 PIPING CLASS : BF9
8 VALVE DESIGN STD : ASME B16.34 / MSS SP-72 / BS 5351
9 DESIGN / CONSTRUCT'N : SPLIT OR ONE PIECE BODY
10 : FLOATING BALL
11 : ANTI-STATIC
12 : FIRE SAFE
13 : REPLACEABLE BALL & SEAT
14 : AUTO BODY CAVITY PRESSURE RELIEF
15 : BLOW OUT PROOF STEM WITH
16 CORROSION ALLOWANCE : 0 MM
17 MATERIALS:
18 BODY / BONNET : SS316
19 BALL : SS316 (L)
20 STEM/TRUNION : A182 F316 (L)
21 SEAT RING : PTFE
22 SEAT INSERTS : VTA (NOTE 3)
23 STEM SEALS/PACKING : PTFE IMPREGNATED FIBRECORD
24 BOLTING : BOLTS ASTM A320-L7+Zn
-
25 : NUTS ASTM A194-4+Zn
-
26 OPERATOR : LEVER OPERATOR
27 GASKETS : SPIRAL-WOUND SS 316 GASKET WITH GRAPHITE FILLER
28 PAINTING : AS PER 07087-00000-MC08 _ SPECIFICATION FOR PAINTING
29 CERTIFICATION MATERIAL : EN 10204 TYPE: 3.1

30 SPECIAL REQUIREMENTS : N/A

31

32
INSPECTION & TESTING REQUIREMENTS
33 REQ'D INSPECTION & TESTING NOTES
34 VISUAL EXAMINATION (NOTE A) 100% (A) WHERE VISUAL EXAMINATION INDICATES AREAS OF POTENTIAL
35 MAGNETIC PARTICLE EXAMINATION AS REQ'D CONCERN, LPI OR MPI EXAMINATION SHALL BE APPLIED IN
36 LIQUID PENETRANT EXAMINATION (NOTE A) AS REQ'D ACCORDANCE WITH ASME V ARTICLE 6 (LPI) OR ARTICLE 7 (MPI)
37 RADIOGRAPHIC EXAMINATION AS REQ'D
38
39 PRESSURE TEST (NOTE B) AS REQ'D (B) TEST PRESSURES SHALL BE IN ACCORDANCE WITH ASME B16.34
40 AND VALVE INSPECTION & TESTING PROCEDURE SHALL BE AS PER
41 ASME B16.34/ API 598/ API 6D.
42
FIRE SAFE CERTIFICATION TO API 607
43 YES
/ BS6755 PART 2 / BS6755 PART 2
44
45

46 NOTES
47
48 1. VTA: Vendor to advise
49 2. Valve marking shall be in accordance with MSS-SP 25.
50 3. Manufacturer shall select seat material to meet the design pressure/ temperature range.
51
52

53

54

DATA SHEET No.

DK19-025-PP-DS-001
0 26/Aug/19 ISSUED FOR REVIEW VĐK KQC LCH
A 22/Jul/19 ISSUED FOR REVIEW VĐK KQC LCH
PAGE 7 OF 27 REV : 0
REV DATE DESCRIPTION BY CHECK APPROVAL CLIENT APP.
 MANUAL VALVE DATA SHEET
CLIENT CA MAU FERTILIZER PLANT
CONTRACTOR DK ENGINEERING CONSULTANCY JOINT STOCK COMPANY
PROJECT CO2 RECOVERY SYSTEM IN PERMEATE GAS AND FLASH GAS
TITLE DATA SHEET FOR BALL VALVE
VALVE TYPE: VALVE SIZE (NPS) : PRESSURE / TEMPERATURE RATINGS
-100 to
#150, FLANGE RF, STAINLESS STEEL MAX DESIGN TEMP - °C 38 93 149 204
min. 8" max. 8"
BALL VALVE MAX DESIGN PRES - Barg 15.3 13.2 12 11
DESIGN REQUIREMENTS
1 DESCRIPTIONS:
2 VALVE RATING : 150#
3 o o
DESIGN TEMP. RANGE : -10 C MIN TO 90 C MAX
4 BORE : FULL BORE
5 END STYLE / CON'N : ASME B16.5, RF FLANGED(NOTE 3)
6 FACE TO FACE DIM'S : ASME B 16.10 LONG PATTERN
7 PIPING CLASS : BF9
8 VALVE DESIGN STD : ASME B16.34 / MSS SP-72 / BS 5351
9 DESIGN / CONSTRUCT'N : SPLIT OR ONE PIECE BODY
10 : TRUNNION MOUNTED BALL
11 : ANTI-STATIC
12 : FIRE SAFE
13 : REPLACEABLE BALL & SEAT
14 : AUTO BODY CAVITY PRESSURE RELIEF
15 : BLOW OUT PROOF STEM WITH
16 CORROSION ALLOWANCE : 0 MM
17 MATERIALS:
18 BODY / BONNET : SS316
19 BALL : SS316 (L)
20 STEM/TRUNION : A182 F316 (L)
21 SEAT RING : PTFE
22 SEAT INSERTS : VTA (NOTE 4)
23 STEM SEALS/PACKING : PTFE IMPREGNATED FIBRECORD
24 BOLTING : BOLTS ASTM A320-L7+Zn
-
25 : NUTS ASTM A194-4+Zn
-
26 OPERATOR : GEAR OPERATOR
27 GASKETS : SPIRAL-WOUND SS 316 GASKET WITH GRAPHITE FILLER
28 PAINTING : AS PER 07087-00000-MC08 _ SPECIFICATION FOR PAINTING
29 CERTIFICATION MATERIAL : EN 10204 TYPE: 3.1

30 SPECIAL REQUIREMENTS : N/A

31

32
INSPECTION & TESTING REQUIREMENTS
33 REQ'D INSPECTION & TESTING NOTES
34 VISUAL EXAMINATION (NOTE A) 100% (A) WHERE VISUAL EXAMINATION INDICATES AREAS OF POTENTIAL
35 MAGNETIC PARTICLE EXAMINATION AS REQ'D CONCERN, LPI OR MPI EXAMINATION SHALL BE APPLIED IN
36 LIQUID PENETRANT EXAMINATION (NOTE A) AS REQ'D ACCORDANCE WITH ASME V ARTICLE 6 (LPI) OR ARTICLE 7 (MPI)
37 RADIOGRAPHIC EXAMINATION AS REQ'D
38
39 PRESSURE TEST (NOTE B) AS REQ'D (B) TEST PRESSURES SHALL BE IN ACCORDANCE WITH ASME B16.34
40 AND VALVE INSPECTION & TESTING PROCEDURE SHALL BE AS PER
41 ASME B16.34/ API 598/ API 6D.
42
FIRE SAFE CERTIFICATION TO API 607
43 YES
/ BS6755 PART 2 / BS6755 PART 2
44
45

46 NOTES
47
48 1. VTA: Vendor to advise
49 2. Valve marking shall be in accordance with MSS-SP 25.
50 3. Raised Face (RF) Flange end connections shall have surface roughness between 3,2 µm and 6.3 µm
51 4. Manufacturer shall select seat material to meet the design pressure/ temperature range.
52

53

54

DATA SHEET No.

DK19-025-PP-DS-001
0 26/Aug/19 ISSUED FOR REVIEW VĐK KQC LCH
A 22/Jul/19 ISSUED FOR REVIEW VĐK KQC LCH
PAGE 8 OF 27 REV : 0
REV DATE DESCRIPTION BY CHECK APPROVAL CLIENT APP.
 MANUAL VALVE DATA SHEET
CLIENT CA MAU FERTILIZER PLANT
CONTRACTOR DK ENGINEERING CONSULTANCY JOINT STOCK COMPANY
PROJECT CO2 RECOVERY SYSTEM IN PERMEATE GAS AND FLASH GAS
TITLE DATA SHEET FOR BALL VALVE
VALVE TYPE: VALVE SIZE (NPS) : PRESSURE / TEMPERATURE RATINGS
#300, FLANGE RF, CARBON STEEL MAX DESIGN TEMP - °C -10 to 38 93 149 204
min. 8" max. 8"
BALL VALVE MAX DESIGN PRES - Barg 49 49 47.5 46.1
DESIGN REQUIREMENTS
1 DESCRIPTIONS:
2 VALVE RATING : 300#
3 o o
DESIGN TEMP. RANGE : -10 C MIN TO 75 C MAX
4 BORE : FULL BORE
5 END STYLE / CON'N : ASME B16.5, RF FLANGED,(NOTE 3)
6 FACE TO FACE DIM'S : ASME B 16.10 LONG PATTERN
7 PIPING CLASS : CB1
8 VALVE DESIGN STD : ASME B16.34 / MSS SP-72 / BS 5351
9 DESIGN / CONSTRUCT'N : SPLIT OR ONE PIECE BODY
10 : TRUNNION MOUNTED
11 : ANTI-STATIC
12 : FIRE SAFE
13 : REPLACEABLE BALL & SEAT
14 : AUTO BODY CAVITY PRESSURE RELIEF
15 : BLOW OUT PROOF STEM WITH
16 CORROSION ALLOWANCE : 1.6 MM
17 MATERIALS:
18 BODY / BONNET : CARBON STEEL - ASTM A216 - WCB
19 BALL : SS316 (L)
20 STEM/TRUNION : A182 F316 (L)
21 SEAT RING : SS316 (L) STELLITE SURFACED
22 SEAT INSERTS : VTA (NOTE 4)
23 STEM SEALS/PACKING : PTFE IMPREGNATED FIBRECORD
24 BOLTING : BOLTS - ASTM A193 Gr B7 (HOT-DIPPED GALV.)
25 : NUTS ASTM A194 GR.2H HEAVY.HEX. (HOT-DIPPED GALV.)
-
26 OPERATOR : GEAR OPERATOR
27 GASKETS : SS 304 WITH GRAPHITE FILLER
28 PAINTING : AS PER 07087-00000-MC08 _ SPECIFICATION FOR PAINTING
29 CERTIFICATION MATERIAL : EN 10204 TYPE: 3.1

30 SPECIAL REQUIREMENTS : N/A

31

32
INSPECTION & TESTING REQUIREMENTS
33 REQ'D INSPECTION & TESTING NOTES
34 VISUAL EXAMINATION (NOTE A) 100% (A) WHERE VISUAL EXAMINATION INDICATES AREAS OF POTENTIAL
35 MAGNETIC PARTICLE EXAMINATION AS REQ'D CONCERN, LPI OR MPI EXAMINATION SHALL BE APPLIED IN
36 LIQUID PENETRANT EXAMINATION (NOTE A) AS REQ'D ACCORDANCE WITH ASME V ARTICLE 6 (LPI) OR ARTICLE 7 (MPI)
37 RADIOGRAPHIC EXAMINATION AS REQ'D
38
39 PRESSURE TEST (NOTE B) AS REQ'D (B) TEST PRESSURES SHALL BE IN ACCORDANCE WITH ASME B16.34
40 AND VALVE INSPECTION & TESTING PROCEDURE SHALL BE AS PER
41 ASME B16.34/ API 598/ API 6D.
42

FIRE SAFE CERTIFICATION TO API 607

43 YES
/ BS6755 PART 2 / BS6755 PART 2
44
45

46 NOTES
47
48 1. VTA: Vendor to advise
49 2. Valve marking shall be in accordance with MSS-SP 25.
50 3. Raised Face (RF) Flange end connections shall have surface roughness between 3,2 µm and 6.3 µm
51 4. Manufacturer shall select seat material to meet the design pressure/ temperature range.
52

53

54

DATA SHEET No.

DK19-025-PP-DS-001
0 26/Aug/19 ISSUED FOR REVIEW VĐK KQC LCH
A 22/Jul/19 ISSUED FOR REVIEW VĐK KQC LCH
PAGE 9 OF 27 REV : 0
REV DATE DESCRIPTION BY CHECK APPROVAL CLIENT APP.
 MANUAL VALVE DATA SHEET
CLIENT CA MAU FERTILIZER PLANT
CONTRACTOR DK ENGINEERING CONSULTANCY JOINT STOCK COMPANY
PROJECT CO2 RECOVERY SYSTEM IN PERMEATE GAS AND FLASH GAS
TITLE DATA SHEET FOR BALL VALVE
VALVE TYPE: VALVE SIZE (NPS) : PRESSURE / TEMPERATURE RATINGS
#300, FLANGE RF, CARBON STEEL MAX DESIGN TEMP - °C -10 to 38 93 149 204
min. 1" max. 2"
BALL VALVE MAX DESIGN PRES - Barg 49 49 47.5 46.1
DESIGN REQUIREMENTS
1 DESCRIPTIONS:
2 VALVE RATING : 300#
3 o o
DESIGN TEMP. RANGE : -10 C MIN TO 120 C MAX
4 BORE : FULL BORE
5 END STYLE / CON'N : ASME B16.5, RF FLANGED,(NOTE 3)
6 FACE TO FACE DIM'S : ASME B 16.10 LONG PATTERN
7 PIPING CLASS : CB1
8 VALVE DESIGN STD : ASME B16.34 / MSS SP-72 / BS 5351
9 DESIGN / CONSTRUCT'N : SPLIT OR ONE PIECE BODY
10 : FLOATING BALL
11 : ANTI-STATIC
12 : FIRE SAFE
13 : REPLACEABLE BALL & SEAT
14 : AUTO BODY CAVITY PRESSURE RELIEF
15 : BLOW OUT PROOF STEM WITH
16 CORROSION ALLOWANCE : 1.6 MM
17 MATERIALS:
18 BODY / BONNET : FORGINGS - CARBON STEEL - ASTM A105N / CASTINGS - CARBON STEEL - ASTM A216 - WCB
19 BALL : CS+CHROMEPLATED
20 STEM/TRUNION : 13CR
21 SEAT RING : PTFE
22 SEAT INSERTS : VTA (NOTE 4)
23 STEM SEALS/PACKING : PTFE IMPREGNATED FIBRECORD
24 BOLTING : BOLTS - ASTM A193 Gr B7 (HOT-DIPPED GALV.)
25 : NUTS - ASTM A194 GR.2H HEAVY.HEX. (HOT-DIPPED GALV.)
26 OPERATOR : LEVER OPERATOR
27 GASKETS : SS 304 WITH GRAPHITE FILLER
28 PAINTING : AS PER 07087-00000-MC08 _ SPECIFICATION FOR PAINTING
29 CERTIFICATION MATERIAL : EN 10204 TYPE: 3.1

30 SPECIAL REQUIREMENTS : N/A

31

32
INSPECTION & TESTING REQUIREMENTS
33 REQ'D INSPECTION & TESTING NOTES
34 VISUAL EXAMINATION (NOTE A) 100% (A) WHERE VISUAL EXAMINATION INDICATES AREAS OF POTENTIAL
35 MAGNETIC PARTICLE EXAMINATION AS REQ'D CONCERN, LPI OR MPI EXAMINATION SHALL BE APPLIED IN
36 LIQUID PENETRANT EXAMINATION (NOTE A) AS REQ'D ACCORDANCE WITH ASME V ARTICLE 6 (LPI) OR ARTICLE 7 (MPI)
37 RADIOGRAPHIC EXAMINATION AS REQ'D
38
39 PRESSURE TEST (NOTE B) AS REQ'D (B) TEST PRESSURES SHALL BE IN ACCORDANCE WITH ASME B16.34
40 AND VALVE INSPECTION & TESTING PROCEDURE SHALL BE AS PER
41 ASME B16.34/ API 598/ API 6D.
42
FIRE SAFE CERTIFICATION TO API 607
43 YES
/ BS6755 PART 2 / BS6755 PART 2
44
45

46 NOTES
47
48 1. VTA: Vendor to advise
49 2. Valve marking shall be in accordance with MSS-SP 25.
50 3. Raised Face (RF) Flange end connections shall have surface roughness between 3,2 µm and 6.3 µm
51 4. Manufacturer shall select seat material to meet the design pressure/ temperature range.
52 5 LO / CSO devices shall be provided for 2" ball valve
53

54

DATA SHEET No.

DK19-025-PP-DS-001
0 26/Aug/19 ISSUED FOR REVIEW VĐK KQC LCH
A 22/Jul/19 ISSUED FOR REVIEW VĐK KQC LCH
PAGE 10 OF 27 REV : 0
REV DATE DESCRIPTION BY CHECK APPROVAL CLIENT APP.
 MANUAL VALVE DATA SHEET
CLIENT CA MAU FERTILIZER PLANT
CONTRACTOR DK ENGINEERING CONSULTANCY JOINT STOCK COMPANY
PROJECT CO2 RECOVERY SYSTEM IN PERMEATE GAS AND FLASH GAS
TITLE DATA SHEET FOR LUG BUTTERFLY VALVE
VALVE TYPE: VALVE SIZE (NPS) : PRESSURE / TEMPERATURE RATINGS
#150, RF, CARBON STEEL MAX DESIGN TEMP - °C -10 to 38 93 149 204
min. 8" max. 8"
CENTERLINE BUTTERFLY VALVE MAX DESIGN PRES - Barg 19 17 15.1 13.1
DESIGN REQUIREMENTS
1 DESCRIPTIONS:
2 VALVE RATING : 150#
o o
3 DESIGN TEMP. RANGE : 0 C MIN TO 75 C MAX
4 BORE : MANUFACTURE STANDARD
5 END STYLE / CON'N : RAISED FACE, DOUBLE FLANGE
6 FACE TO FACE DIM'S : ASME B 16.10 / API 609
7 PIPING CLASS : BB1
8 VALVE DESIGN STD : ASME B16.34 / API 609
9 DESIGN / CONSTRUCT'N : RESILIENT SEAT & LINER
10 : NON-LUG DESIGN
11 : CONCENTRIC DISC
12 :
13 :
14 :
15 :
16 CORROSION ALLOWANCE : 1.6 MM
17 MATERIALS:
18 BODY / BONNET : A216 WCB
19 DISC : A216 WCB
20 STEM : 13CR
21 SEAT RING : RUBBER
22 SEAT INSERTS : VTA (NOTE 3)
23 STEM SEALS/PACKING : PTFE IMPREGNATED FIBRECORD
24 BOLTING : BOLTS ASTM A193 Gr B7 (HOT-DIPPED GALV.)
-
25 : NUTS ASTM A194 GR.2H HEAVY.HEX. (HOT-DIPPED GALV.)
-
26 OPERATOR : LEVER OPERATOR
27 GASKETS : N/A
28 PAINTING : AS PER 07087-00000-MC08 _ SPECIFICATION FOR PAINTING
29 CERTIFICATION MATERIAL : EN 10204 TYPE: 3.1

30 SPECIAL REQUIREMENTS : N/A

31
32
INSPECTION & TESTING REQUIREMENTS
33 REQ'D INSPECTION & TESTING NOTES
34 VISUAL EXAMINATION (NOTE A) 100% (A) WHERE VISUAL EXAMINATION INDICATES AREAS OF POTENTIAL
35 MAGNETIC PARTICLE EXAMINATION AS REQ'D CONCERN, LPI OR MPI EXAMINATION SHALL BE APPLIED IN
36 LIQUID PENETRANT EXAMINATION (NOTE A) AS REQ'D ACCORDANCE WITH ASME V ARTICLE 6 (LPI) OR ARTICLE 7 (MPI)
37 RADIOGRAPHIC EXAMINATION AS REQ'D
38
39 PRESSURE TEST (NOTE B) AS REQ'D (B) TEST PRESSURES SHALL BE IN ACCORDANCE WITH ASME B16.34
40 AND VALVE INSPECTION & TESTING PROCEDURE SHALL BE AS PER
41 ASME B16.34/ API 598/ API 6D.
42
43
44
45

46 NOTES
47
48 1. VTA: Vendor to advise
49 2. Valve marking shall be in accordance with MSS-SP 25.
50 3. Manufacturer shall select seat material to meet the design pressure/ temperature range.
51
52
53
54

DATA SHEET No.

DK19-025-PP-DS-001
0 26/Aug/19 ISSUED FOR REVIEW VĐK KQC LCH
A 22/Jul/19 ISSUED FOR REVIEW VĐK KQC LCH
PAGE 11 OF 27 REV : 0
REV DATE DESCRIPTION BY CHECK APPROVAL CLIENT APP.
 MANUAL VALVE DATA SHEET
CLIENT CA MAU FERTILIZER PLANT
CONTRACTOR DK ENGINEERING CONSULTANCY JOINT STOCK COMPANY
PROJECT CO2 RECOVERY SYSTEM IN PERMEATE GAS AND FLASH GAS
TITLE DATA SHEET FOR WAFER BUTTERFLY VALVE
VALVE TYPE: VALVE SIZE (NPS) : PRESSURE / TEMPERATURE RATINGS
#150, WAFER TYPE, RF, STAINLESS STEEL MAX DESIGN TEMP - °C -100 to 38 93 149 204
min. 14" max. 14"
BUTTERFLY VALVE MAX DESIGN PRES - Barg 15.3 13.2 12 11
DESIGN REQUIREMENTS
1 DESCRIPTIONS:
2 VALVE RATING : 150#
o o
3 DESIGN TEMP. RANGE : -10 C MIN TO 75 C MAX
4 BORE : MANUFACTURE STANDARD
5 END STYLE / CON'N : WAFER TYPE / ASME B16.5, RF FLANGED(NOTE 3)
6 FACE TO FACE DIM'S : ASME B 16.10 / API 609
7 PIPING CLASS : BF9
8 VALVE DESIGN STD : ASME B16.34 / API 609
9 DESIGN / CONSTRUCT'N : CENTERLINE BUTTERFLY VALVE
10 : CONCENTRIC DISC, ANTI STATIC, FIRESAFE
11 : ADJUSTABLE PACKING
12 : REPLACEABLE SEAT
13 :
14 :
15 :
16 CORROSION ALLOWANCE : 0 MM
17 MATERIALS:
18 BODY / BONNET : SS 304(L)
19 DISC : SS 304(L)
20 STEM : A182 F304(L)
21 SEAT RING : PTFE
22 SEAT INSERTS : VTA (NOTE 4)
23 STEM SEALS/PACKING : SS316 WITH GRAPHITE FILLER
24 BOLTING : BOLTS - ASTM A320-L7+Zn
25 : NUTS - ASTM A194-4+Zn
26 OPERATOR : GEAR OPERATOR
27 GASKETS : N/A
28 PAINTING : AS PER 07087-00000-MC08 _ SPECIFICATION FOR PAINTING
29 CERTIFICATION MATERIAL : EN 10204 TYPE: 3.1

30 SPECIAL REQUIREMENTS : N/A

31
32
INSPECTION & TESTING REQUIREMENTS
33 REQ'D INSPECTION & TESTING NOTES
34 VISUAL EXAMINATION (NOTE A) 100% (A) WHERE VISUAL EXAMINATION INDICATES AREAS OF POTENTIAL
35 MAGNETIC PARTICLE EXAMINATION AS REQ'D CONCERN, LPI OR MPI EXAMINATION SHALL BE APPLIED IN
36 LIQUID PENETRANT EXAMINATION (NOTE A) AS REQ'D ACCORDANCE WITH ASME V ARTICLE 6 (LPI) OR ARTICLE 7 (MPI)
37 RADIOGRAPHIC EXAMINATION AS REQ'D
38
39 PRESSURE TEST (NOTE B) AS REQ'D (B) TEST PRESSURES SHALL BE IN ACCORDANCE WITH ASME B16.34
40 AND VALVE INSPECTION & TESTING PROCEDURE SHALL BE AS PER
41 ASME B16.34/ API 598/ API 6D.
42
43
44
45

46 NOTES
47
48 1. VTA: Vendor to advise
49 2. Valve marking shall be in accordance with MSS-SP 25.
50 3. Raised Face (RF) Flange end connections shall have surface roughness between 3,2 µm and 6.3 µm
51 4. Manufacturer shall select seat material to meet the design pressure/ temperature range.
52
53
54

DATA SHEET No.

DK19-025-PP-DS-001
0 26/Aug/19 ISSUED FOR REVIEW VĐK KQC LCH
A 22/Jul/19 ISSUED FOR REVIEW VĐK KQC LCH
PAGE 12 OF 27 REV : 0
REV DATE DESCRIPTION BY CHECK APPROVAL CLIENT APP.
 MANUAL VALVE DATA SHEET
CLIENT CA MAU FERTILIZER PLANT
CONTRACTOR DK ENGINEERING CONSULTANCY JOINT STOCK COMPANY
PROJECT CO2 RECOVERY SYSTEM IN PERMEATE GAS AND FLASH GAS
TITLE DATA SHEET FOR CHECK VALVE
VALVE TYPE: VALVE SIZE (NPS) : PRESSURE / TEMPERATURE RATINGS
#150, FLANGE RF, STAINLESS STEEL MAX DESIGN TEMP - °C -10 TO 38 93 149 204
min. 14" max. 14"
SWING CHECK VALVE MAX DESIGN PRES - Barg 15.3 13.2 12 11
DESIGN REQUIREMENTS
1 DESCRIPTIONS:
2 VALVE RATING : 150#
3 DESIGN TEMP. RANGE : -10oC MIN TO 75oC MAX
4 BORE : STANDARD
5 END STYLE / CON'N : ASME B16.5, RF FLANGED, (NOTE 3)
6 FACE TO FACE DIM'S : ASME B 16.10
7 PIPING CLASS : BF9
8 VALVE DESIGN STD : ASME B16.34 / API 594
9 DESIGN / CONSTRUCT'N : SWING TYPE,
10 : HORIZONTAL PATTERN
11 : BOLTED CAP
12 : FLOW DIRECTION
13 :RENEWABLE SEATS & DISC
14 :
15 :
16 CORROSION ALLOWANCE : 0 MM
17 MATERIALS:
18 BODY : SS 304L
19 DISC / PLATE : SS 304L
20 SEAT RING : SS 304L
. SPRING : N/A
22 SEALS : SUITABLE FOR -10oC MIN TO 75oC & SERVICE.
23 HING, HING PIN, NUT : VTA
24 BOLTING : BOLTS - ASTM A320-L7 + Zn
25 : NUTS - ASTM A194-4 + Zn
26 OPERATOR : N/A
27 GASKETS : SS 316 WITH GRAPHITE FILLER
28 PAINTING : AS PER 07087-00000-MC08 _ SPECIFICATION FOR PAINTING
29 CERTIFICATION MATERIAL : EN 10204 TYPE: 3.1

30 SPECIAL REQUIREMENTS : N/A

31
32 INSPECTION & TESTING REQUIREMENTS
33 REQ'D INSPECTION & TESTING NOTES
34 VISUAL EXAMINATION (NOTE A) 100% (A) WHERE VISUAL EXAMINATION INDICATES AREAS OF POTENTIAL
35 MAGNETIC PARTICLE EXAMINATION AS REQ'D CONCERN, LPI OR MPI EXAMINATION SHALL BE APPLIED IN
36 LIQUID PENETRANT EXAMINATION (NOTE A) AS REQ'D ACCORDANCE WITH ASME V ARTICLE 6 (LPI) OR ARTICLE 7 (MPI)
37 RADIOGRAPHIC EXAMINATION AS REQ'D
38
39 PRESSURE TEST (NOTE B) AS REQ'D (B) TEST PRESSURES SHALL BE IN ACCORDANCE WITH ASME B16.34
40 AND VALVE INSPECTION & TESTING PROCEDURE SHALL BE AS PER
41 ASME B16.34/ API 598/ API 6D.
42
43
44
45
46 NOTES
47 1. VTA: Vendor to advise
48 2. Valve marking shall be in accordance with MSS-SP 25.
49 3. Raised Face (RF) Flange end connections shall have surface roughness between 3,2 µm and 6.3 µm
50

DATA SHEET No.

DK19-025-PP-DS-001
0 26/Aug/19 ISSUED FOR REVIEW VĐK KQC LCH
A 22/Jul/19 ISSUED FOR REVIEW VĐK KQC LCH
PAGE 13 OF 27 REV : 0
REV DATE DESCRIPTION BY CHECK APPROVAL CLIENT APP.
 MANUAL VALVE DATA SHEET
CLIENT CA MAU FERTILIZER PLANT
CONTRACTOR DK ENGINEERING CONSULTANCY JOINT STOCK COMPANY
PROJECT CO2 RECOVERY SYSTEM IN PERMEATE GAS AND FLASH GAS
TITLE DATA SHEET FOR CHECK VALVE
VALVE TYPE: VALVE SIZE (NPS) : PRESSURE / TEMPERATURE RATINGS
#300, FLANGE RF, CARBON STEEL MAX DESIGN TEMP - °C -10 TO 38 93 149 204
min. 2" max. 24"
SWING CHECK VALVE MAX DESIGN PRES - Barg 49 49 47.5 46.1
DESIGN REQUIREMENTS
1 DESCRIPTIONS:
2 VALVE RATING : 300#
o o
3 DESIGN TEMP. RANGE : 0 C MIN TO 290 C MAX
4 BORE : STANDARD
5 END STYLE / CON'N : ASME B16.5, RF FLANGED,(NOTE 3)
6 FACE TO FACE DIM'S : ASME B 16.10
7 PIPING CLASS : CB1
8 VALVE DESIGN STD : ASME B16.34 / API 594
9 DESIGN / CONSTRUCT'N : SWING TYPE
10 : HORIZONTAL PATTERN
11 : BOLTED CAP
12 : FLOW DIRECTION
13 : RENEWABLE SEATS & DISC
14 :
15 :
16 CORROSION ALLOWANCE : 1.6 MM
17 MATERIALS:
18 BODY : ASTM A216 GR. WCB
19 DISC / PLATE : 13 CR
20 SEATS : SS316 (L) STELLITE SURFACED
21 SPRING : N/A
o
22 SEALS : SUITABLE FOR 0 C MIN TO 290oC & SERVICE.
23 HING, HING PIN, NUT : VTA
24 BOLTING : BOLTS - ASTM A193 Gr B7 (HOT-DIPPED GALV.)
25 : NUTS - ASTM A194 GR.2H HEAVY.HEX. (HOT-DIPPED GALV.)
26 OPERATOR : N/A
27 GASKETS : SS 304 WITH GRAPHITE FILLER
28 PAINTING : AS PER 07087-00000-MC08 _ SPECIFICATION FOR PAINTING
29 CERTIFICATION MATERIAL : EN 10204 TYPE: 3.1

30 SPECIAL REQUIREMENTS : N/A

31
32 INSPECTION & TESTING REQUIREMENTS
33 REQ'D INSPECTION & TESTING NOTES
34 VISUAL EXAMINATION (NOTE A) 100% (A) WHERE VISUAL EXAMINATION INDICATES AREAS OF POTENTIAL
35 MAGNETIC PARTICLE EXAMINATION AS REQ'D CONCERN, LPI OR MPI EXAMINATION SHALL BE APPLIED IN
36 LIQUID PENETRANT EXAMINATION (NOTE A) AS REQ'D ACCORDANCE WITH ASME V ARTICLE 6 (LPI) OR ARTICLE 7 (MPI)
37 RADIOGRAPHIC EXAMINATION AS REQ'D
38
39 PRESSURE TEST (NOTE B) AS REQ'D (B) TEST PRESSURES SHALL BE IN ACCORDANCE WITH ASME B16.34
40 AND VALVE INSPECTION & TESTING PROCEDURE SHALL BE AS PER
41 ASME B16.34/ API 598/ API 6D.
42
43
44
45
46 NOTES
47 1. VTA: Vendor to advise
48 2. Valve marking shall be in accordance with MSS-SP 25.
49 3. Raised Face (RF) Flange end connections shall have surface roughness between 3,2 µm and 6.3 µm
50

DATA SHEET No.

DK19-025-PP-DS-001
0 26/Aug/19 ISSUED FOR REVIEW VĐK KQC LCH
A 22/Jul/19 ISSUED FOR REVIEW VĐK KQC LCH
PAGE 14 OF 27 REV : 0
REV DATE DESCRIPTION BY CHECK APPROVAL CLIENT APP.
 MANUAL VALVE DATA SHEET
CLIENT CA MAU FERTILIZER PLANT
CONTRACTOR DK ENGINEERING CONSULTANCY JOINT STOCK COMPANY
PROJECT CO2 RECOVERY SYSTEM IN PERMEATE GAS AND FLASH GAS
TITLE DATA SHEET FOR CHECK VALVE
VALVE TYPE: VALVE SIZE (NPS) : PRESSURE / TEMPERATURE RATINGS
#800, SW, CARBON STEEL MAX DESIGN TEMP - °C -10 TO 38 93 149 204
min. 0.75" max. 0.75"
PISTON CHECK VALVE MAX DESIGN PRES - Barg 49 49 47.5 46.1
DESIGN REQUIREMENTS
1 DESCRIPTIONS:
2 VALVE RATING : 800#
o o
3 DESIGN TEMP. RANGE : 0 C MIN TO 120 C MAX
4 BORE : STANDARD
5 END STYLE / CON'N : 2 END PUP PIPE, PLAIN, SCH 40S, SUITABLE FOR BW & SW, FINISH TO ASME B16.11
6 FACE TO FACE DIM'S : 2 END EXTENDED WELD END, 100mm.
7 PIPING CLASS : CB1
8 VALVE DESIGN STD : ASME B16.34 / API 594
9 DESIGN / CONSTRUCT'N : PISTON LIFT TYPE
10 : HORIZONTAL PATTERN
11 : BOLTED CAP
12 : FLOW DIRECTION
13 : SPRING RETURN
14 :
15 :
16 CORROSION ALLOWANCE : 1.6 MM
17 MATERIALS:
18 BODY : ASTM A105
19 DISC / PLATE : 13 CR
20 SEATS : SS316 (L) STELLITE SURFACED
21 SPRING : N/A
o
22 SEALS : SUITABLE FOR 0 C MIN TO 120oC & SERVICE.
23 HING, HING PIN, NUT : VTA
24 BOLTING : BOLTS - ASTM A193 Gr B7 (HOT-DIPPED GALV.)
25 : NUTS - ASTM A194 GR.2H HEAVY.HEX. (HOT-DIPPED GALV.)
26 OPERATOR : N/A
27 GASKETS : SS 304 WITH GRAPHITE FILLER
28 PAINTING : AS PER 07087-00000-MC08 _ SPECIFICATION FOR PAINTING
29 CERTIFICATION MATERIAL : EN 10204 TYPE: 3.1

30 SPECIAL REQUIREMENTS : N/A

31
32 INSPECTION & TESTING REQUIREMENTS
33 REQ'D INSPECTION & TESTING NOTES
34 VISUAL EXAMINATION (NOTE A) 100% (A) WHERE VISUAL EXAMINATION INDICATES AREAS OF POTENTIAL
35 MAGNETIC PARTICLE EXAMINATION AS REQ'D CONCERN, LPI OR MPI EXAMINATION SHALL BE APPLIED IN
36 LIQUID PENETRANT EXAMINATION (NOTE A) AS REQ'D ACCORDANCE WITH ASME V ARTICLE 6 (LPI) OR ARTICLE 7 (MPI)
37 RADIOGRAPHIC EXAMINATION AS REQ'D
38
39 PRESSURE TEST (NOTE B) AS REQ'D (B) TEST PRESSURES SHALL BE IN ACCORDANCE WITH ASME B16.34
40 AND VALVE INSPECTION & TESTING PROCEDURE SHALL BE AS PER
41 ASME B16.34/ API 598/ API 6D.
42
43
44
45
46 NOTES
47 1. VTA: Vendor to advise
48 2. Valve marking shall be in accordance with MSS-SP 25.
49
50

DATA SHEET No.

DK19-025-PP-DS-001
0 26/Aug/19 ISSUED FOR REVIEW VĐK KQC LCH
A 22/Jul/19 ISSUED FOR REVIEW VĐK KQC LCH
PAGE 15 OF 27 REV : 0
REV DATE DESCRIPTION BY CHECK APPROVAL CLIENT APP.
 MANUAL VALVE DATA SHEET
CLIENT CA MAU FERTILIZER PLANT
CONTRACTOR DK ENGINEERING CONSULTANCY JOINT STOCK COMPANY
PROJECT CO2 RECOVERY SYSTEM IN PERMEATE GAS AND FLASH GAS
TITLE DATA SHEET FOR GATE VALVE
VALVE TYPE: VALVE SIZE (NPS) : PRESSURE / TEMPERATURE RATINGS
#800, SW, CARBON STEEL MAX DESIGN TEMP - °C -10 to 38 93 149 204
min. 0.75" max. 0.75"
GATE VALVE MAX DESIGN PRES - Barg 19 17 15.1 13.1
DESIGN REQUIREMENTS
1 DESCRIPTIONS:
2 VALVE RATING : 800#
o o
3 DESIGN TEMP. RANGE : -10 C MIN TO 120 C MAX
4 BORE : MANUFACTUER STANDARD
5 END STYLE / CON'N : 2 END PUP PIPE, PLAIN, SCH 80, SUITABLE FOR BW & SW, FINISH TO ASME B16.11
6 FACE TO FACE DIM'S : 2 END EXTENDED WELD END, 100mm (ALL SIZES).
7 PIPING CLASS : BB1
8 VALVE DESIGN STD : ASME B16.34 / API 602
9 DESIGN / CONSTRUCT'N : OS&Y, BOLTED BONNET
10 : SOLID WEDGE / FLEXIBLE WEDGE
11 : RENEWABLE SEATS
12 : RISING-STEM
13 : BACK SEATED
14 :
15 :
16 CORROSION ALLOWANCE : 1.6 MM
17 MATERIALS:
18 BODY / BONNET : ASTM A105N
19 DISC / WEDGE : 13CR
20 STEM : 13CR
21 SEAT RING : STELLITE SURFACED
22 SEAT INSERTS : VTA (NOTE 3)
23 STEM SEALS/PACKING : STAINLESS STEEL GASKET WITH GRAPHITE FILLER
24 BOLTING : BOLTS - ASTM A193 Gr B7 (HOT-DIPPED GALV.)
25 : NUTS - ASTM A194 GR.2H HEAVY.HEX. (HOT-DIPPED GALV.)
26 OPERATOR : HANDWHEEL
27 GASKETS : SS 304 WITH GRAPHITE FILLER
28 PAINTING : AS PER 07087-00000-MC08 _ SPECIFICATION FOR PAINTING
29 CERTIFICATION MATERIAL : EN 10204 TYPE: 3.1

30 SPECIAL REQUIREMENTS : N/A

31
32
INSPECTION & TESTING REQUIREMENTS
33 REQ'D INSPECTION & TESTING NOTES
34 VISUAL EXAMINATION (NOTE A) 100% (A) WHERE VISUAL EXAMINATION INDICATES AREAS OF POTENTIAL
35 MAGNETIC PARTICLE EXAMINATION AS REQ'D CONCERN, LPI OR MPI EXAMINATION SHALL BE APPLIED IN
36 LIQUID PENETRANT EXAMINATION (NOTE A) AS REQ'D ACCORDANCE WITH ASME V ARTICLE 6 (LPI) OR ARTICLE 7 (MPI)
37 RADIOGRAPHIC EXAMINATION AS REQ'D
38 PWHT NO
39 PRESSURE TEST (NOTE B) AS REQ'D (B) TEST PRESSURES SHALL BE IN ACCORDANCE WITH ASME B16.34
40 AND VALVE INSPECTION & TESTING PROCEDURE SHALL BE AS PER
41 ASME B16.34/ API 598/ API 6D.
42
43
44
45

46 NOTES
47
48 1. VTA: Vendor to advise
49 2. Valve marking shall be in accordance with MSS-SP 25.
50 3. Manufacturer shall select seat material to meet the design pressure/ temperature range.
51
52
53
54

DATA SHEET No.

DK19-025-PP-DS-001
0 26/Aug/19 ISSUED FOR REVIEW VĐK KQC LCH
A 11/Jul/19 ISSUED FOR REVIEW VĐK KQC LCH
PAGE 16 OF 27 REV : 0
REV DATE DESCRIPTION BY CHECK APPROVAL CLIENT APP.
 MANUAL VALVE DATA SHEET
CLIENT CA MAU FERTILIZER PLANT
CONTRACTOR DK ENGINEERING CONSULTANCY JOINT STOCK COMPANY
PROJECT CO2 RECOVERY SYSTEM IN PERMEATE GAS AND FLASH GAS
TITLE DATA SHEET FOR GATE VALVE
VALVE TYPE: VALVE SIZE (NPS) : PRESSURE / TEMPERATURE RATINGS
#150, FLANGE RF, CARBON STEEL MAX DESIGN TEMP - °C -10 to 38 93 149 204
min. 2" max. 48"
GATE VALVE MAX DESIGN PRES - Barg 19 17 15.1 13.1
DESIGN REQUIREMENTS
1 DESCRIPTIONS:
2 VALVE RATING : 150#
o o
3 DESIGN TEMP. RANGE : -10 C MIN TO 290 C MAX
4 BORE : MANUFACTURE STANDARD
5 END STYLE / CON'N : ASME B16.5, RF FLANGED, (NOTE 3)

6 FACE TO FACE DIM'S : ASME B 16.10

7 PIPING CLASS : BB1
8 VALVE DESIGN STD : ASME B16.34 / API 600 / API 602
9 DESIGN / CONSTRUCT'N : OS&Y, BOLTED BONNET
10 : SOLID WEDGE / FLEXIBLE WEDGE
11 : RENEWABLE SEATS
12 : RISING-STEM
13 : BACK SEATED
14 :
15 :
16 CORROSION ALLOWANCE : 1.6 MM
17 MATERIALS:
18 BODY / BONNET : A216 WCB
19 DISC / WEDGE : 13CR
20 STEM : 13CR
21 SEAT RING : STELLITE SURFACED
22 SEAT INSERTS : VTA (NOTE 4)
23 STEM SEALS/PACKING : SS304 WITH GRAPHITE FILLER
24 BOLTING : BOLTS - ASTM A193 Gr B7 (HOT-DIPPED GALV.)
25 : NUTS - ASTM A194 GR.2H HEAVY.HEX. (HOT-DIPPED GALV.)
26 OPERATOR : HANDWHEEL OPERATOR TO 12"; 14" AND ABOVE GEAR OPERATOR
27 GASKETS : SS 304 WITH GRAPHITE FILLER
28 PAINTING : AS PER 07087-00000-MC08 _ SPECIFICATION FOR PAINTING
29 CERTIFICATION MATERIAL : EN 10204 TYPE: 3.1

30 SPECIAL REQUIREMENTS : N/A

31
32
INSPECTION & TESTING REQUIREMENTS
33 REQ'D INSPECTION & TESTING NOTES
34 VISUAL EXAMINATION (NOTE A) 100% (A) WHERE VISUAL EXAMINATION INDICATES AREAS OF POTENTIAL
35 MAGNETIC PARTICLE EXAMINATION AS REQ'D CONCERN, LPI OR MPI EXAMINATION SHALL BE APPLIED IN
36 LIQUID PENETRANT EXAMINATION (NOTE A) AS REQ'D ACCORDANCE WITH ASME V ARTICLE 6 (LPI) OR ARTICLE 7 (MPI)
37 RADIOGRAPHIC EXAMINATION AS REQ'D
38
39 PRESSURE TEST (NOTE B) AS REQ'D (B) TEST PRESSURES SHALL BE IN ACCORDANCE WITH ASME B16.34
40 AND VALVE INSPECTION & TESTING PROCEDURE SHALL BE AS PER
41 ASME B16.34/ API 598/ API 6D.
42
43
44
45

46 NOTES
47
48 1. VTA: Vendor to advise
49 2. Valve marking shall be in accordance with MSS-SP 25.
50 3. Raised Face (RF) Flange end connections shall have surface roughness between 3,2 µm and 6.3 µm
51 4. Manufacturer shall select seat material to meet the design pressure/ temperature range.
52
53
54

DATA SHEET No.

DK19-025-PP-DS-001
0 26/Aug/19 ISSUED FOR REVIEW VĐK KQC LCH
A 22/Jul/19 ISSUED FOR REVIEW VĐK KQC LCH
PAGE 17 OF 27 REV : 0
REV DATE DESCRIPTION BY CHECK APPROVAL CLIENT APP.
 MANUAL VALVE DATA SHEET
CLIENT CA MAU FERTILIZER PLANT
CONTRACTOR DK ENGINEERING CONSULTANCY JOINT STOCK COMPANY
PROJECT CO2 RECOVERY SYSTEM IN PERMEATE GAS AND FLASH GAS
TITLE DATA SHEET FOR GATE VALVE
VALVE TYPE: VALVE SIZE (NPS) : PRESSURE / TEMPERATURE RATINGS
#800, SW, STAINLESS STEEL MAX DESIGN TEMP - °C -100 to 38 93 149 204
min. 0.75" max. 0.75"
GATE VALVE MAX DESIGN PRES - Barg 15.3 13.2 12 11
DESIGN REQUIREMENTS
1 DESCRIPTIONS:
2 VALVE RATING : 800#
o o
3 DESIGN TEMP. RANGE : -10 C MIN TO 120 C MAX
4 BORE : STANDARD
5 END STYLE / CON'N : 2 END PUP PIPE, PLAIN, SCH 40S, SUITABLE FOR BW & SW, FINISH TO ASME B16.11
6 FACE TO FACE DIM'S : 2 END EXTENDED WELD END, 100mm.
7 PIPING CLASS : BF9
8 VALVE DESIGN STD : ASME B16.34 / API 602
9 DESIGN / CONSTRUCT'N : OS&Y, BOLTED BONNET
10 : SOLID WEDGE / FLEXIBLE WEDGE
11 : RENEWABLE SEATS
12 : RISING-STEM
13 : BACK SEATED
14 :
15 :
16 CORROSION ALLOWANCE : 1.6 MM
17 MATERIALS:
18 BODY / BONNET : SS304L
19 DISC / WEDGE : SS304(L)
20 STEM : A182 F304(L)
21 SEAT RING : SS304(L)
22 SEAT INSERTS : VTA (NOTE 3)
23 STEM SEALS/PACKING : SS304 WITH GRAPHITE FILLER
24 BOLTING : BOLTS - A320-L7+Zn
25 : NUTS - A194-4+Zn
26 OPERATOR : HANDWHEEL
27 GASKETS : SS 316 WITH GRAPHITE FILLER
28 PAINTING : AS PER 07087-00000-MC08 _ SPECIFICATION FOR PAINTING
29 CERTIFICATION MATERIAL : EN 10204 TYPE: 3.1

30 SPECIAL REQUIREMENTS : N/A

31
32
INSPECTION & TESTING REQUIREMENTS
33 REQ'D INSPECTION & TESTING NOTES
34 VISUAL EXAMINATION (NOTE A) 100% (A) WHERE VISUAL EXAMINATION INDICATES AREAS OF POTENTIAL
35 MAGNETIC PARTICLE EXAMINATION AS REQ'D CONCERN, LPI OR MPI EXAMINATION SHALL BE APPLIED IN
36 LIQUID PENETRANT EXAMINATION (NOTE A) AS REQ'D ACCORDANCE WITH ASME V ARTICLE 6 (LPI) OR ARTICLE 7 (MPI)
37 RADIOGRAPHIC EXAMINATION AS REQ'D
38 PWHT NO
39 PRESSURE TEST (NOTE B) AS REQ'D (B) TEST PRESSURES SHALL BE IN ACCORDANCE WITH ASME B16.34
40 AND VALVE INSPECTION & TESTING PROCEDURE SHALL BE AS PER
41 ASME B16.34/ API 598/ API 6D.
42
43
44
45

46 NOTES
47
48 1. VTA: Vendor to advise
49 2. Valve marking shall be in accordance with MSS-SP 25.
50 3. Manufacturer shall select seat material to meet the design pressure/ temperature range.
51
52
53
54

DATA SHEET No.

DK19-025-PP-DS-001
0 26/Aug/19 ISSUED FOR REVIEW VĐK KQC LCH
A 22/Jul/19 ISSUED FOR REVIEW VĐK KQC LCH
PAGE 18 OF 27 REV : 0
REV DATE DESCRIPTION BY CHECK APPROVAL CLIENT APP.
 MANUAL VALVE DATA SHEET
CLIENT CA MAU FERTILIZER PLANT
CONTRACTOR DK ENGINEERING CONSULTANCY JOINT STOCK COMPANY
PROJECT CO2 RECOVERY SYSTEM IN PERMEATE GAS AND FLASH GAS
TITLE DATA SHEET FOR GATE VALVE
VALVE TYPE: VALVE SIZE (NPS) : PRESSURE / TEMPERATURE RATINGS
#800, SW, CARBON STEEL MAX DESIGN TEMP - °C -10 to 38 93 149 204
min. 0.5" max. 1.5"
GATE VALVE MAX DESIGN PRES - Barg 49 49 47.5 46.1
DESIGN REQUIREMENTS
1 DESCRIPTIONS:
2 VALVE RATING : 800#
o o
3 DESIGN TEMP. RANGE : -10 C MIN TO 120 C MAX
4 BORE : MANUFACTURE STANDARD
5 END STYLE / CON'N : 2 END PUP PIPE, PLAIN, SCH 80, SUITABLE FOR BW & SW, FINISH TO ASME B16.11
6 FACE TO FACE DIM'S : 2 END EXTENDED WELD END, 100mm (ALL SIZES).
7 PIPING CLASS : CB1
8 VALVE DESIGN STD : ASME B16.34 / API 602
9 DESIGN / CONSTRUCT'N : OS&Y, BOLTED BONNET
10 : SOLID WEDGE / FLEXIBLE WEDGE
11 : RENEWABLE SEATS
12 : RISING-STEM
13 : BACK SEATED
14 :
15 :
16 CORROSION ALLOWANCE : 1.6 MM
17 MATERIALS:
18 BODY / BONNET : ASTM A105N
19 DISC / WEDGE : 13CR
20 STEM : 13CR
21 SEAT RING : STELLITE SURFACED
22 SEAT INSERTS : VTA (NOTE 3)
23 STEM SEALS/PACKING : SS304 WITH GRAPHITE FILLER
24 BOLTING : BOLTS - ASTM A193 Gr B7 (HOT-DIPPED GALV.)
25 : NUTS - ASTM A194 GR.2H HEAVY.HEX. (HOT-DIPPED GALV.)
26 OPERATOR : HANDWHEEL
27 GASKETS : SS 304 WITH GRAPHITE FILLER
28 PAINTING : AS PER 07087-00000-MC08 _ SPECIFICATION FOR PAINTING
29 CERTIFICATION MATERIAL : EN 10204 TYPE: 3.1

30 SPECIAL REQUIREMENTS : N/A

31
32
INSPECTION & TESTING REQUIREMENTS
33 REQ'D INSPECTION & TESTING NOTES
34 VISUAL EXAMINATION (NOTE A) 100% (A) WHERE VISUAL EXAMINATION INDICATES AREAS OF POTENTIAL
35 MAGNETIC PARTICLE EXAMINATION AS REQ'D CONCERN, LPI OR MPI EXAMINATION SHALL BE APPLIED IN
36 LIQUID PENETRANT EXAMINATION (NOTE A) AS REQ'D ACCORDANCE WITH ASME V ARTICLE 6 (LPI) OR ARTICLE 7 (MPI)
37 RADIOGRAPHIC EXAMINATION AS REQ'D
38 PWHT NO
39 PRESSURE TEST (NOTE B) AS REQ'D (B) TEST PRESSURES SHALL BE IN ACCORDANCE WITH ASME B16.34
40 AND VALVE INSPECTION & TESTING PROCEDURE SHALL BE AS PER
41 ASME B16.34/ API 598/ API 6D.
42
43
44
45

46 NOTES
47
48 1. VTA: Vendor to advise
49 2. Valve marking shall be in accordance with MSS-SP 25.
50 3. Manufacturer shall select seat material to meet the design pressure/ temperature range.
51
52
53
54

DATA SHEET No.

DK19-025-PP-DS-001
0 26/Aug/19 ISSUED FOR REVIEW VĐK KQC LCH
A 22/Jul/19 ISSUED FOR REVIEW VĐK KQC LCH
PAGE 19 OF 27 REV : 0
REV DATE DESCRIPTION BY CHECK APPROVAL CLIENT APP.
 MANUAL VALVE DATA SHEET
CLIENT CA MAU FERTILIZER PLANT
CONTRACTOR DK ENGINEERING CONSULTANCY JOINT STOCK COMPANY
PROJECT CO2 RECOVERY SYSTEM IN PERMEATE GAS AND FLASH GAS
TITLE DATA SHEET FOR GATE VALVE
VALVE TYPE: VALVE SIZE (NPS) : PRESSURE / TEMPERATURE RATINGS
#300, FLANGE RF, CARBON STEEL MAX DESIGN TEMP - °C -10 to 38 93 149 204
min. 2" max. 24"
GATE VALVE MAX DESIGN PRES - Barg 49 49 47.5 46.1
DESIGN REQUIREMENTS
1 DESCRIPTIONS:
2 VALVE RATING : 300#
o o
3 DESIGN TEMP. RANGE : -10 C MIN TO 120 C MAX
4 BORE : MANUFACTURE STANDARD
5 END STYLE / CON'N : ASME B16.5, RF FLANGED, (NOTE 3)

6 FACE TO FACE DIM'S : ASME B 16.10

7 PIPING CLASS : CB1
8 VALVE DESIGN STD : ASME B16.34 / API 600 / API 602
9 DESIGN / CONSTRUCT'N : OS&Y, BOLTED BONNET
10 : SOLID WEDGE / FLEXIBLE WEDGE
11 : RENEWABLE SEATS
12 : RISING-STEM
13 : BACK SEATED
14 :
15 :
16 CORROSION ALLOWANCE : 1.6 MM
17 MATERIALS:
18 BODY / BONNET : A216 WCB
19 DISC / WEDGE : 13CR
20 STEM : 13CR
21 SEAT RING : STELLITE SURFACED
22 SEAT INSERTS : VTA (NOTE 4)
23 STEM SEALS/PACKING : STAINLESS STEEL GASKET WITH GRAPHITE FILLER
24 BOLTING : BOLTS - ASTM A193 Gr B7 (HOT-DIPPED GALV.)
25 : NUTS - ASTM A194 GR.2H HEAVY.HEX. (HOT-DIPPED GALV.)
26 OPERATOR : HANDWHEEL OPERATOR TO 12"; 14" AND ABOVE GEAR OPERATOR
27 GASKETS : SS 304 WITH GRAPHITE FILLER
28 PAINTING : AS PER 07087-00000-MC08 _ SPECIFICATION FOR PAINTING
29 CERTIFICATION MATERIAL : EN 10204 TYPE: 3.1

30 SPECIAL REQUIREMENTS : N/A

31
32
INSPECTION & TESTING REQUIREMENTS
33 REQ'D INSPECTION & TESTING NOTES
34 VISUAL EXAMINATION (NOTE A) 100% (A) WHERE VISUAL EXAMINATION INDICATES AREAS OF POTENTIAL
35 MAGNETIC PARTICLE EXAMINATION AS REQ'D CONCERN, LPI OR MPI EXAMINATION SHALL BE APPLIED IN
36 LIQUID PENETRANT EXAMINATION (NOTE A) AS REQ'D ACCORDANCE WITH ASME V ARTICLE 6 (LPI) OR ARTICLE 7 (MPI)
37 RADIOGRAPHIC EXAMINATION AS REQ'D
38
39 PRESSURE TEST (NOTE B) AS REQ'D (B) TEST PRESSURES SHALL BE IN ACCORDANCE WITH ASME B16.34
40 AND VALVE INSPECTION & TESTING PROCEDURE SHALL BE AS PER
41 ASME B16.34/ API 598/ API 6D.
42
43
44
45

46 NOTES
47
48 1. VTA: Vendor to advise
49 2. Valve marking shall be in accordance with MSS-SP 25.
50 3. Raised Face (RF) Flange end connections shall have surface roughness between 3,2 µm and 6.3 µm
51 4. Manufacturer shall select seat material to meet the design pressure/ temperature range.
52
53
54

DATA SHEET No.

DK19-025-PP-DS-001
0 26/Aug/19 ISSUED FOR REVIEW VĐK KQC LCH
A 22/Jul/19 ISSUED FOR REVIEW VĐK KQC LCH
PAGE 20 OF 27 REV : 0
REV DATE DESCRIPTION BY CHECK APPROVAL CLIENT APP.
 MANUAL VALVE DATA SHEET
CLIENT CA MAU FERTILIZER PLANT
CONTRACTOR DK ENGINEERING CONSULTANCY JOINT STOCK COMPANY
PROJECT CO2 RECOVERY SYSTEM IN PERMEATE GAS AND FLASH GAS
TITLE DATA SHEET FOR GATE VALVE
VALVE TYPE: VALVE SIZE (NPS) : PRESSURE / TEMPERATURE RATINGS
#800, SW, STAINLESS STEEL MAX DESIGN TEMP - °C -29 to 38 93 149 204
min. 0.75" max. 0.75"
GATE VALVE MAX DESIGN PRES - Barg 47 39.3 34.7 30.8
DESIGN REQUIREMENTS
1 DESCRIPTIONS:
2 VALVE RATING : 800#
o o
3 DESIGN TEMP. RANGE : -10 C MIN TO 120 C MAX
4 BORE : MANUFACTURE STANDARD
5 END STYLE / CON'N : 2 END PUP PIPE, PLAIN, SCH 40S, SUITABLE FOR BW & SW, FINISH TO ASME B16.11
6 FACE TO FACE DIM'S : 2 END EXTENDED WELD END, 100mm
7 PIPING CLASS : CE9
8 VALVE DESIGN STD : ASME B16.34 / API 602
9 DESIGN / CONSTRUCT'N : OS&Y, BOLTED BONNET
10 : SOLID WEDGE / FLEXIBLE WEDGE
11 : RENEWABLE SEATS
12 : RISING-STEM
13 : BACK SEATED
14 :
15 :
16 CORROSION ALLOWANCE : 0 MM
17 MATERIALS:
18 BODY / BONNET : SS304
19 DISC / WEDGE : SS316(L)
20 STEM : A182 F316(L)
21 SEAT RING : SS316(L)
22 SEAT INSERTS : VTA (NOTE 3)
23 STEM SEALS/PACKING : STAINLESS STEEL GASKET WITH GRAPHITE FILLER
24 BOLTING : BOLTS - ASTM A193 Gr B7 (HOT-DIPPED GALV.)
25 : NUTS - ASTM A194 GR.2H HEAVY.HEX. (HOT-DIPPED GALV.)
26 OPERATOR : HANDWHEEL
27 GASKETS : SS 316 WITH GRAPHITE FILLER
28 PAINTING : AS PER 07087-00000-MC08 _ SPECIFICATION FOR PAINTING
29 CERTIFICATION MATERIAL : EN 10204 TYPE: 3.1

30 SPECIAL REQUIREMENTS : PWHT (POST WELD HEAT TREATMENT) REQUIRED

31
32
INSPECTION & TESTING REQUIREMENTS
33 REQ'D INSPECTION & TESTING NOTES
34 VISUAL EXAMINATION (NOTE A) 100% (A) WHERE VISUAL EXAMINATION INDICATES AREAS OF POTENTIAL
35 MAGNETIC PARTICLE EXAMINATION AS REQ'D CONCERN, LPI OR MPI EXAMINATION SHALL BE APPLIED IN
36 LIQUID PENETRANT EXAMINATION (NOTE A) AS REQ'D ACCORDANCE WITH ASME V ARTICLE 6 (LPI) OR ARTICLE 7 (MPI)
37 RADIOGRAPHIC EXAMINATION AS REQ'D
38
39 PRESSURE TEST (NOTE B) AS REQ'D (B) TEST PRESSURES SHALL BE IN ACCORDANCE WITH ASME B16.34
40 AND VALVE INSPECTION & TESTING PROCEDURE SHALL BE AS PER
41 ASME B16.34/ API 598/ API 6D.
42
43
44
45

46 NOTES
47
48 1. VTA: Vendor to advise
49 2. Valve marking shall be in accordance with MSS-SP 25.
50 3. Manufacturer shall select seat material to meet the design pressure/ temperature range.
51
52
53
54

DATA SHEET No.

DK19-025-PP-DS-001
0 26/Aug/19 ISSUED FOR REVIEW VĐK KQC LCH
A 22/Jul/19 ISSUED FOR REVIEW VĐK KQC LCH
PAGE 21 OF 27 REV : 0
REV DATE DESCRIPTION BY CHECK APPROVAL CLIENT APP.
 MANUAL VALVE DATA SHEET
CLIENT CA MAU FERTILIZER PLANT
CONTRACTOR DK ENGINEERING CONSULTANCY JOINT STOCK COMPANY
PROJECT CO2 RECOVERY SYSTEM IN PERMEATE GAS AND FLASH GAS
TITLE DATA SHEET FOR GATE VALVE
VALVE TYPE: VALVE SIZE (NPS) : PRESSURE / TEMPERATURE RATINGS
#300, FLANGE RF, STAINLESS STEEL MAX DESIGN TEMP - °C -29 to 38 93 149 204
min. 6" max. 6"
GATE VALVE MAX DESIGN PRES - Barg 47 39.3 34.7 30.8
DESIGN REQUIREMENTS
1 DESCRIPTIONS:
2 VALVE RATING : 300#
o o
3 DESIGN TEMP. RANGE : -10 C MIN TO 120 C MAX
4 BORE : MANUFACTURE STANDARD
5 END STYLE / CON'N : ASME B16.5, RF FLANGED, (NOTE 3)
6 FACE TO FACE DIM'S : ASME B 16.10
7 PIPING CLASS : CE9
8 VALVE DESIGN STD : ASME B16.34 / API 600 / API 602
9 DESIGN / CONSTRUCT'N : OS&Y, BOLTED BONNET
10 : SOLID WEDGE / FLEXIBLE WEDGE
11 : RENEWABLE SEATS
12 : RISING-STEM
13 : BACK SEATED
14 :
15 :
16 CORROSION ALLOWANCE : 0 MM
17 MATERIALS:
18 BODY / BONNET : SS304
19 DISC / WEDGE : SS316(L)
20 STEM : A182 F316(L)
21 SEAT RING : SS316(L)
22 SEAT INSERTS : VTA (NOTE 4)
23 STEM SEALS/PACKING : STAINLESS STEEL GASKET WITH GRAPHITE FILLER
24 BOLTING : BOLTS - ASTM A193 Gr B7 (HOT-DIPPED GALV.)
25 : NUTS - ASTM A194 GR.2H HEAVY.HEX. (HOT-DIPPED GALV.)
26 OPERATOR : HANDWHEEL
27 GASKETS : SS 316 WITH GRAPHITE FILLER
28 PAINTING : AS PER 07087-00000-MC08 _ SPECIFICATION FOR PAINTING
29 CERTIFICATION MATERIAL : EN 10204 TYPE: 3.1

30 SPECIAL REQUIREMENTS : N/A

31
32
INSPECTION & TESTING REQUIREMENTS
33 REQ'D INSPECTION & TESTING NOTES
34 VISUAL EXAMINATION (NOTE A) 100% (A) WHERE VISUAL EXAMINATION INDICATES AREAS OF POTENTIAL
35 MAGNETIC PARTICLE EXAMINATION AS REQ'D CONCERN, LPI OR MPI EXAMINATION SHALL BE APPLIED IN
36 LIQUID PENETRANT EXAMINATION (NOTE A) AS REQ'D ACCORDANCE WITH ASME V ARTICLE 6 (LPI) OR ARTICLE 7 (MPI)
37 RADIOGRAPHIC EXAMINATION AS REQ'D
38
39 PRESSURE TEST (NOTE B) AS REQ'D (B) TEST PRESSURES SHALL BE IN ACCORDANCE WITH ASME B16.34
40 AND VALVE INSPECTION & TESTING PROCEDURE SHALL BE AS PER
41 ASME B16.34/ API 598/ API 6D.
42
43
44
45

46 NOTES
47
48 1. VTA: Vendor to advise
49 2. Valve marking shall be in accordance with MSS-SP 25.
50 3. Raised Face (RF) Flange end connections shall have surface roughness between 3,2 µm and 6.3 µm
51 4. Manufacturer shall select seat material to meet the design pressure/ temperature range.
52
53
54

DATA SHEET No.

DK19-025-PP-DS-001
0 26/Aug/19 ISSUED FOR REVIEW VĐK KQC LCH
A 22/Jul/19 ISSUED FOR REVIEW VĐK KQC LCH
PAGE 22 OF 27 REV : 0
REV DATE DESCRIPTION BY CHECK APPROVAL CLIENT APP.
 MANUAL VALVE DATA SHEET
CLIENT CA MAU FERTILIZER PLANT
CONTRACTOR DK ENGINEERING CONSULTANCY JOINT STOCK COMPANY
PROJECT CO2 RECOVERY SYSTEM IN PERMEATE GAS AND FLASH GAS
TITLE DATA SHEET FOR GATE VALVE
VALVE TYPE: VALVE SIZE (NPS) : PRESSURE / TEMPERATURE RATINGS
#600, FLANGE RF, ALLOY STEEL MAX DESIGN TEMP - °C -29 93 149 204
min. 8" max. 8"
GATE VALVE MAX DESIGN PRES - Barg 93 88.4 83.4 81.5
DESIGN REQUIREMENTS
1 DESCRIPTIONS:
2 VALVE RATING : 600#
o o
3 DESIGN TEMP. RANGE : -10 C MIN TO 420 C MAX
4 BORE : MANUFACTURE STANDARD
5 END STYLE / CON'N : ASME B16.5, RF FLANGED, (NOTE 3)

6 FACE TO FACE DIM'S : ASME B 16.10

7 PIPING CLASS : ED1
8 VALVE DESIGN STD : ASME B16.34 / API 600 / API 602
9 DESIGN / CONSTRUCT'N : OS&Y, BOLTED BONNET
10 : SOLID WEDGE / FLEXIBLE WEDGE
11 : RENEWABLE SEATS
12 : RISING-STEM
13 : BACK SEATED
14 :
15 :
16 CORROSION ALLOWANCE : 1.6 MM
17 MATERIALS:
18 BODY / BONNET : A217 - WC6
19 DISC / WEDGE : 13CR + STELLITE
20 STEM : 13CR
21 SEAT RING : 13CR + STELLITE
22 SEAT INSERTS : VTA (NOTE 4)
23 STEM SEALS/PACKING : STAINLESS STEEL GASKET WITH GRAPHITE FILLER
24 BOLTING : BOLTS - ASTM A193 Gr B16 (HOT-DIPPED GALV.)
25 : NUTS - ASTM A194 GR 4 (HOT-DIPPED GALV.)
26 OPERATOR : HANDWHEEL
27 GASKETS : SS 304 WITH GRAPHITE FILLER
28 PAINTING : AS PER 07087-00000-MC08 _ SPECIFICATION FOR PAINTING
29 CERTIFICATION MATERIAL : EN 10204 TYPE: 3.1

30 SPECIAL REQUIREMENTS : N/A

31
32
INSPECTION & TESTING REQUIREMENTS
33 REQ'D INSPECTION & TESTING NOTES
34 VISUAL EXAMINATION (NOTE A) 100% (A) WHERE VISUAL EXAMINATION INDICATES AREAS OF POTENTIAL
35 MAGNETIC PARTICLE EXAMINATION AS REQ'D CONCERN, LPI OR MPI EXAMINATION SHALL BE APPLIED IN
36 LIQUID PENETRANT EXAMINATION (NOTE A) AS REQ'D ACCORDANCE WITH ASME V ARTICLE 6 (LPI) OR ARTICLE 7 (MPI)
37 RADIOGRAPHIC EXAMINATION AS REQ'D
38
39 PRESSURE TEST (NOTE B) AS REQ'D (B) TEST PRESSURES SHALL BE IN ACCORDANCE WITH ASME B16.34
40 AND VALVE INSPECTION & TESTING PROCEDURE SHALL BE AS PER
41 ASME B16.34/ API 598/ API 6D.
42
43
44
45

46 NOTES
47
48 1. VTA: Vendor to advise
49 2. Valve marking shall be in accordance with MSS-SP 25.
50 3. Raised Face (RF) Flange end connections shall have surface roughness between 3,2 µm and 6.3 µm
51 4. Manufacturer shall select seat material to meet the design pressure/ temperature range.
52
53
54

DATA SHEET No.

DK19-025-PP-DS-001
0 26/Aug/19 ISSUED FOR REVIEW VĐK KQC LCH
A 22/Jul/19 ISSUED FOR REVIEW VĐK KQC LCH
PAGE 23 OF 27 REV : 0
REV DATE DESCRIPTION BY CHECK APPROVAL CLIENT APP.
 MANUAL VALVE DATA SHEET
CLIENT CA MAU FERTILIZER PLANT
CONTRACTOR DK ENGINEERING CONSULTANCY JOINT STOCK COMPANY
PROJECT CO2 RECOVERY SYSTEM IN PERMEATE GAS AND FLASH GAS
TITLE DATA SHEET FOR GATE VALVE
VALVE TYPE: VALVE SIZE (NPS) : PRESSURE / TEMPERATURE RATINGS
#800, SW, STAINLESS STEEL MAX DESIGN TEMP - °C -29 to 38 93 149 204
min. 0.75" max. 1.5"
GATE VALVE MAX DESIGN PRES - Barg 89.3 74.3 65.4 58.3
DESIGN REQUIREMENTS
1 DESCRIPTIONS:
2 VALVE RATING : 800#
3 DESIGN TEMP. RANGE : -10oC MIN TO 120oC MAX
4 BORE : MANUFACTURE STANDARD
5 END STYLE / CON'N : 2 END PUP PIPE, PLAIN, SCH 40S, SUITABLE FOR BW & SW, FINISH TO ASME B16.11
6 FACE TO FACE DIM'S : 2 END EXTENDED WELD END, 100mm.
7 PIPING CLASS : EE9
8 VALVE DESIGN STD : ASME B16.34 / API 602
9 DESIGN / CONSTRUCT'N : OS&Y, BOLTED BONNET
10 : SOLID WEDGE / FLEXIBLE WEDGE
11 : RENEWABLE SEATS
12 : RISING-STEM
13 : BACK SEATED
14 :
15 :
16 CORROSION ALLOWANCE : 0 MM
17 MATERIALS:
18 BODY / BONNET : SS 304
19 DISC / WEDGE : SS 304L
20 STEM : A182 F304L
21 SEAT RING : SS 304L
22 SEAT INSERTS : VTA (NOTE 3)
23 STEM SEALS/PACKING : STAINLESS STEEL GASKET WITH GRAPHITE FILLER
24 BOLTING : BOLTS - ASTM A193 - B8T CL.2
25 : NUTS - ASTM A194 - 8C
26 OPERATOR : HANDWHEEL
27 GASKETS : AISI 304 WITH GRAPHITE FILLER
28 PAINTING : AS PER 07087-00000-MC08 _ SPECIFICATION FOR PAINTING
29 CERTIFICATION MATERIAL : EN 10204 TYPE: 3.1

30 SPECIAL REQUIREMENTS : N/A

31
32
INSPECTION & TESTING REQUIREMENTS
33 REQ'D INSPECTION & TESTING NOTES
34 VISUAL EXAMINATION (NOTE A) 100% (A) WHERE VISUAL EXAMINATION INDICATES AREAS OF POTENTIAL
35 MAGNETIC PARTICLE EXAMINATION AS REQ'D CONCERN, LPI OR MPI EXAMINATION SHALL BE APPLIED IN
36 LIQUID PENETRANT EXAMINATION (NOTE A) AS REQ'D ACCORDANCE WITH ASME V ARTICLE 6 (LPI) OR ARTICLE 7 (MPI)
37 RADIOGRAPHIC EXAMINATION AS REQ'D
38 PWHT NO
39 PRESSURE TEST (NOTE B) AS REQ'D (B) TEST PRESSURES SHALL BE IN ACCORDANCE WITH ASME B16.34
40 AND VALVE INSPECTION & TESTING PROCEDURE SHALL BE AS PER
41 ASME B16.34/ API 598/ API 6D.
42
43
44
45

46 NOTES
47
48 1. VTA: Vendor to advise
49 2. Valve marking shall be in accordance with MSS-SP 25.
50 3. Manufacturer shall select seat material to meet the design pressure/ temperature range.
51
52
53
54

DATA SHEET No.

DK19-025-PP-DS-001
0 26/Aug/19 ISSUED FOR REVIEW VĐK KQC LCH
A 22/Jul/19 ISSUED FOR REVIEW VĐK KQC LCH
PAGE 24 OF 27 REV : 0
REV DATE DESCRIPTION BY CHECK APPROVAL CLIENT APP.
 MANUAL VALVE DATA SHEET
CLIENT CA MAU FERTILIZER PLANT
CONTRACTOR DK ENGINEERING CONSULTANCY JOINT STOCK COMPANY
PROJECT CO2 RECOVERY SYSTEM IN PERMEATE GAS AND FLASH GAS
TITLE DATA SHEET FOR GATE VALVE
VALVE TYPE: VALVE SIZE (NPS) : PRESSURE / TEMPERATURE RATINGS
#2500, BW, ALLOY STEEL MAX DESIGN TEMP - °C -10 TO 38 100 200 300
min. 6" max. 6"
GATE VALVE MAX DESIGN PRES - Barg 320 296 287.4 287.4
DESIGN REQUIREMENTS
1 DESCRIPTIONS:
2 VALVE RATING : 2500#
o o
3 DESIGN TEMP. RANGE : -10 C MIN TO 540 C MAX
4 BORE : MANUFACTURE STANDARD
5 END STYLE / CON'N : 2 END PUP PIPE, BW, SCH XXS, SUITABLE FOR BW, FINISH TO ASME B16.25
6 FACE TO FACE DIM'S : 2 END EXTENDED WELD END, 200mm
7 PIPING CLASS : HD1
8 VALVE DESIGN STD : ASME B16.34 / API 600 / API 602
9 DESIGN / CONSTRUCT'N : OS&Y, BOLTED BONNET
10 : SOLID WEDGE / FLEXIBLE WEDGE
11 : RENEWABLE SEATS
12 : RISING-STEM
13 : BACK SEATED
14 :
15 :
16 CORROSION ALLOWANCE : 1.6 MM
17 MATERIALS:
18 BODY / BONNET : A217 - WC9
19 DISC / WEDGE : 13CR + STELLITE
20 STEM : 13CR
21 SEAT RING : 13CR + STELLITE
22 SEAT INSERTS : VTA (NOTE 3)
23 STEM SEALS/PACKING : STAINLESS STEEL GASKET WITH GRAPHITE FILLER
24 BOLTING : BOLTS - ASTM A193 Gr B16 (HOT-DIPPED GALV.)
25 : NUTS - ASTM A194 GR 4 (HOT-DIPPED GALV.)
26 OPERATOR : GEAR OPERATOR
27 GASKETS : A182-F5
28 PAINTING : AS PER 07087-00000-MC08 _ SPECIFICATION FOR PAINTING
29 CERTIFICATION MATERIAL : EN 10204 TYPE: 3.1

30 SPECIAL REQUIREMENTS : N/A

31
32
INSPECTION & TESTING REQUIREMENTS
33 REQ'D INSPECTION & TESTING NOTES
34 VISUAL EXAMINATION (NOTE A) 100% (A) WHERE VISUAL EXAMINATION INDICATES AREAS OF POTENTIAL
35 MAGNETIC PARTICLE EXAMINATION AS REQ'D CONCERN, LPI OR MPI EXAMINATION SHALL BE APPLIED IN
36 LIQUID PENETRANT EXAMINATION (NOTE A) AS REQ'D ACCORDANCE WITH ASME V ARTICLE 6 (LPI) OR ARTICLE 7 (MPI)
37 RADIOGRAPHIC EXAMINATION AS REQ'D
38 PWHT NO
39 PRESSURE TEST (NOTE B) AS REQ'D (B) TEST PRESSURES SHALL BE IN ACCORDANCE WITH ASME B16.34
40 AND VALVE INSPECTION & TESTING PROCEDURE SHALL BE AS PER
41 ASME B16.34/ API 598/ API 6D.
42
43
44
45

46 NOTES
47
48 1. VTA: Vendor to advise
49 2. Valve marking shall be in accordance with MSS-SP 25.
50 3. Manufacturer shall select seat material to meet the design pressure/ temperature range.
51
52
53
54

DATA SHEET No.

DK19-025-PP-DS-001
0 26/Aug/19 ISSUED FOR REVIEW VĐK KQC LCH
A 22/Jul/19 ISSUED FOR REVIEW VĐK KQC LCH
PAGE 25 OF 27 REV : 0
REV DATE DESCRIPTION BY CHECK APPROVAL CLIENT APP.
 MANUAL VALVE DATA SHEET
CLIENT CA MAU FERTILIZER PLANT
CONTRACTOR DK ENGINEERING CONSULTANCY JOINT STOCK COMPANY
PROJECT CO2 RECOVERY SYSTEM IN PERMEATE GAS AND FLASH GAS
TITLE DATA SHEET FOR GLOBE VALVE
VALVE TYPE: VALVE SIZE (NPS) : PRESSURE / TEMPERATURE RATINGS
#300, FLANGE RF, CARBON STEEL MAX DESIGN TEMP - °C -10 TO 38 93 149 204
min. 2" max. 2"
GLOBE VALVE MAX DESIGN PRES - Barg 49 49 47.5 46.1
DESIGN REQUIREMENTS
1 DESCRIPTIONS:
2 VALVE RATING : 300#
3 DESIGN TEMP. RANGE : -10oC MIN TO 290oC MAX
4 BORE : STANDARD
5 END STYLE / CON'N : ASME B16.5, RF FLANGED,
6 FACE TO FACE DIM'S : ASME B 16.10
7 PIPING CLASS : CB1
8 VALVE DESIGN STD : ASME B16.34 / API 623
9 DESIGN / CONSTRUCT'N : OS&Y BOLTED BONNET
10 : RISING STEM
11 : PLUG OR SEMI-PLUG DISC
12 : REPLACEABLE PLUG/ DISC & SEAT
13 : ANTI-STATIC
14 :
15 :
16 CORROSION ALLOWANCE : 1.6 MM
17 MATERIALS:
18 BODY / BONNET : A216 WCB
19 DISC : 13CR
20 STEM : 13CR
21 SEAT RING : STELLITE SURFACED
22 BACK SEAT : VTA
23 STEM SEALS/PACKING : STAINLESS STEEL GASKET WITH GRAPHITE FILLER
24 BOLTING : BOLTS - ASTM A193 Gr B7 (HOT-DIPPED GALV.)
25 : NUTS - ASTM A194 GR.2H HEAVY.HEX. (HOT-DIPPED GALV.)
26 OPERATOR : HAND WHEEL
27 GASKETS : SS304 WITH GRAPHITE FILLER
28 PAINTING : AS PER 07087-00000-MC08 _ SPECIFICATION FOR PAINTING
29 CERTIFICATION MATERIAL : EN 10204 TYPE: 3.1
30 SPECIAL REQUIREMENTS : N/A
31
32 INSPECTION & TESTING REQUIREMENTS
33 REQ'D INSPECTION & TESTING NOTES
34 VISUAL EXAMINATION (NOTE A) 100% (A) WHERE VISUAL EXAMINATION INDICATES AREAS OF POTENTIAL
35 MAGNETIC PARTICLE EXAMINATION AS REQ'D CONCERN, LPI OR MPI EXAMINATION SHALL BE APPLIED IN
36 LIQUID PENETRANT EXAMINATION (NOTE A) AS REQ'D ACCORDANCE WITH ASME V ARTICLE 6 (LPI) OR ARTICLE 7 (MPI)
37 RADIOGRAPHIC EXAMINATION AS REQ'D
38
39 PRESSURE TEST (NOTE B) AS REQ'D (B) TEST PRESSURES SHALL BE IN ACCORDANCE WITH ASME B16.34
40 AND VALVE INSPECTION & TESTING PROCEDURE SHALL BE AS PER
41 ASME B16.34/ API 598/ API 6D.
42
43
44
45

46 NOTES
47
48 1. VTA: Vendor to advise
49 2. Valve marking shall be in accordance with MSS-SP 25.
50 3. Raised Face (RF) Flange end connections shall have surface roughness between 3,2 µm and 6.3 µm
51
52
53
54

DATA SHEET No.

DK19-025-PP-DS-001
0 26/Aug/19 ISSUED FOR REVIEW VĐK KQC LCH
A 22/Jul/19 ISSUED FOR REVIEW VĐK KQC LCH
PAGE 26 OF 27 REV : 0
REV DATE DESCRIPTION BY CHECK APPROVALCLIENT APP.
 MANUAL VALVE DATA SHEET
CLIENT CA MAU FERTILIZER PLANT
CONTRACTOR DK ENGINEERING CONSULTANCY JOINT STOCK COMPANY
PROJECT CO2 RECOVERY SYSTEM IN PERMEATE GAS AND FLASH GAS
TITLE DATA SHEET FOR GLOBE VALVE
VALVE TYPE: VALVE SIZE (NPS) : PRESSURE / TEMPERATURE RATINGS
#800, SW, CARBON STEEL MAX DESIGN TEMP - °C -10 TO 38 93 149 204
min. 0.75" max. 0.75"
GLOBE VALVE MAX DESIGN PRES - Barg 49 49 47.5 46.1
DESIGN REQUIREMENTS
1 DESCRIPTIONS:
2 VALVE RATING : 800#
3 DESIGN TEMP. RANGE : -10oC MIN TO 290oC MAX
4 BORE : STANDARD
5 END STYLE / CON'N : 2 END PUP PIPE, PLAIN, SCH 80, SUITABLE FOR BW & SW, FINISH TO ASME B16.11
6 FACE TO FACE DIM'S : 2 END EXTENDED WELD END, 100mm.
7 PIPING CLASS : CB1
8 VALVE DESIGN STD : ASME B16.34 / API 623
9 DESIGN / CONSTRUCT'N : OS&Y BOLTED BONNET
10 : RISING STEM
11 : PLUG OR SEMI-PLUG DISC
12 : REPLACEABLE PLUG/ DISC & SEAT
13 : ANTI-STATIC
14 :
15 :
16 CORROSION ALLOWANCE : 1.6 MM
17 MATERIALS:
18 BODY / BONNET : A105
19 DISC : 13CR
20 STEM : 13CR
21 SEAT RING : STELLITE SURFACED
22 BACK SEAT : VTA
23 STEM SEALS/PACKING : STAINLESS STEEL GASKET WITH GRAPHITE FILLER
24 BOLTING : BOLTS - ASTM A193 Gr B7 (HOT-DIPPED GALV.)
25 : NUTS - ASTM A194 GR.2H HEAVY.HEX. (HOT-DIPPED GALV.)
26 OPERATOR : HAND WHEEL
27 GASKETS : SS304 WITH GRAPHITE FILLER
28 PAINTING : AS PER 07087-00000-MC08 _ SPECIFICATION FOR PAINTING
29 CERTIFICATION MATERIAL : EN 10204 TYPE: 3.1
30 SPECIAL REQUIREMENTS : N/A
31
32 INSPECTION & TESTING REQUIREMENTS
33 REQ'D INSPECTION & TESTING NOTES
34 VISUAL EXAMINATION (NOTE A) 100% (A) WHERE VISUAL EXAMINATION INDICATES AREAS OF POTENTIAL
35 MAGNETIC PARTICLE EXAMINATION AS REQ'D CONCERN, LPI OR MPI EXAMINATION SHALL BE APPLIED IN
36 LIQUID PENETRANT EXAMINATION (NOTE A) AS REQ'D ACCORDANCE WITH ASME V ARTICLE 6 (LPI) OR ARTICLE 7 (MPI)
37 RADIOGRAPHIC EXAMINATION AS REQ'D
38
39 PRESSURE TEST (NOTE B) AS REQ'D (B) TEST PRESSURES SHALL BE IN ACCORDANCE WITH ASME B16.34
40 AND VALVE INSPECTION & TESTING PROCEDURE SHALL BE AS PER
41 ASME B16.34/ API 598/ API 6D.
42
43
44
45
46 NOTES
47
48 1. VTA: Vendor to advise
49 2. Valve marking shall be in accordance with MSS-SP 25.
50
51
52
53
54

DATA SHEET No.

DK19-025-PP-DS-001
0 26/Aug/19 ISSUED FOR REVIEW VĐK KQC LCH
A 22/Jul/19 ISSUED FOR REVIEW VĐK KQC LCH
PAGE 27 OF 27 REV : 0
REV DATE DESCRIPTION BY CHECK APPROVALCLIENT APP.