Spicer Tandem Axles

Illustrated Parts List

Spicer® Single Reduction 34,000 - 45,000 lbs
AXIP-0089
November 2004
 Table of Contents

TABLE OF CONTENTS
Spicer Axle Parts Book . . . . . . . . . . 2 Axle Housing & Axle Shafts . . . . . . . 19
Forward Tandem Axle Ring Gear and Pinion Identification . 21
Differential Carrier . . . . . . . . . . . . . 3 Gear Sets . . . . . . . . . . . . . . . . . . . 23
DS340 & DS380 Models Input and Output Yokes . . . . . . . . . . 25
w/2-Speed Differential Carriers . . . 11 Pinion Bearing Spacers . . . . . . . . . 26
Rear Tandem Axle Power Divider Conversion Kit . . . . . 27
Differential Carrier . . . . . . . . . . . . 12 Helical Gear Conversion Kit #113561 28
Differential Lockout (Forward Axle) Differential Carrier Assembly . . . . . 29
Current Production Model . . . . . . . . . . . . . . . . . . .16 Yoke Selection Guide . . . . . . . . . . . 30
Non-Current Production Model . . . . . . . . . . . . . . .17
Wheel Differential Kits . . . . . . . . . . 31

1
 Spicer Axle Parts Book

Spicer Axle Parts Book

Dana Corporation, presents this Parts Book Ordering Spicer Axle Parts
as an aid in the identification and procurement of replacement parts
for Spicer Axles. The information included covers the differential Place all your parts orders through your truck dealer or manufac-
carrier assembly, axle housing, axle shafts, shift system and spe- turer (OEM). Do not order parts directly from DanaCorporation,
cial-designed parts kits and assemblies. Axle & Brake Division.

Exploded views are used to illustrate the parts and show their rela- How to use this Parts Book
tionship to other parts on the carrier. Each part is identified by an
1. Refer to table of contents on opposite page for axle type, model
item number, which in turn, leads to a list containing part name and
or series, and page number.
part number.
2. Turn to the page that applies to the axle in question.
For convenience, part numbers have been included for all pieces of
the carrier assembly. However, some of these parts, such as differ- 3. Locate the desired part in the exploded illustration and note
ential carrier and caps, are serviced only in kits or assemblies. Part Item No. This Item No. will lead you to the part name and num-
numbers are for your reference only. Those parts not serviced sep- ber.
arately are identified with NSS.
4. Refer to the related Parts Listing and locate the same Item No.
Genuine Spicer Parts. and the name. If more than one part number is listed, refer to
the axle model listings at top of list and select the part number
When you buy genuine Spicer replacement parts, you receive the that applies to the axle being serviced.
same high quality and exacting tolerances you find in the original
axle components. Axle Model Coverage:
Only genuine Spicer parts have the latest Spicer engineering This publication covers single reduction highway tandems (34,000-
improvements and assure equal or better performance than the 45,000 Ibs.):
original parts. Forward Tandem Axle Rear Tandem Axle
And Spicer backs you up with a responsive and capable service 34DS 34RS
organization located strategically to provide you with emergency
parts and service when you need them. 38DS 38RS
DS340 RS340
Insist on Spicer quality. Use genuine Spicer replacement parts.
DS380(P) RS380
Abbreviations DS400-P RS400
AR-As Required: Parts that vary in quantity with each axle. Exam- DS341 RS341
ple: shims. DS381 (P) RS381
NSS-Not Serviced Separately: Items which can only be purchased DS401-P RS401
in sets, kit form or service assemblies. Example: ring gear sets. DS341 RS341
RH/LH-Right Hand/Left Hand: Determined as viewed from behind DS402(P) RS402
the vehicle looking forward.
DS451-P RS451
“RTV”-Gasket Compound: Formed-in-place gasket sealer. It is rec-
ommended for use on all surfaces requiring a gasket. PLEASE REVIEW THESE NOTES PRIOR TO USING THIS
PUBLICATION!
Spicer Parts Kits During the 4th Quarter of 1990, Spicer began using new seals and
Spicer Parts Kits give you an economical, convenient way to stock yoke & slingers on models covered in this publication. The new
Spicer replacement parts. They contain all the parts you need to do a seals and slingers are noticeably different from the current seals
complete professional job of overhauling or repairing your Spicer and will affect interchangeability. Before replacing seals or yoke &
axle. And you have only one part number in one easily stored pack- slingers, please refer to information on the top of page 25.
age to order, stock, identify, and satisfy your customers' needs. This publication has been designed to help you service highway
Symbols: tandem models built since 1958. Please note the column heads at
the top of each parts list. The current models appear first, followed
This symbol is used throughout this book to identify parts included by earlier models.
in major kits.
Model changes were made to the current production models effec-
* Carrier Basic Overhaul Kit tive April 6, 1989 (96th day of 1989). Quick identification can be
• Bearing Kit made by checking the carrier casting number on the rear tandem
(127045 or 128109).
From 1972 until May 1978, DS340 and DS380 tandems were built
with 2-Speed differential carriers. Special instructions and parts list
for these models can be found on page 11.

2
 Forward Tandem Axle Differential Carrier

Forward Tandem Axle Differential Carrier

Single Reduction

3
 Forward Tandem Axle Differential Carrier

4
 Forward Tandem Axle Differential Carrier

Qty DS341, DS402(P), DS381(P), DS402(P), DS340, DS380(P),

Item 34DS
Part Name Per DS451-P DS401-P, DS451-P, DS400-P
No. 38DS
Axle Built After 4-6-89 Built Before 4-6-89 NOTE 1
BASIC OVERHAUL KIT 1 124487* 114399* 110593* 110560*
(Contents identified with *)
BEARING KIT 1 211222• 114394• 106845• 99044•
(Contents identified with •)
1 Diff. Carrier & Bearing Caps 1 115690 115690 120924 120923
Carrier Casting No. (NSS) 128107 128107 128107 128107
115690 includes Items 2-4,9-10 NOTE 2 NOTE 2
120923,120924 include Items 2-4,
9-10, 35-37
2 Bearing Cap Screw 4 127179 127179 127179 127179
3 Flat Washer 4 26772 26772 26772 26772
4 Lockwire 4 90538 90538
5 Bearing Adjuster Lock (RH) 1 14275 14275 14275 14275
6 Cotter Pin (RH) 1 90876 90876 90876 90876
7 Bearing Adjuster Lock (LH) 1 13377 13377 13377 13377
8 Cotter Pin (LH) 1 90873 90873 90873 90873
9 Carrier Cover Dowel Pin 2 7641 7641 7641 7641
10 Filler Plug 1 90325 90325 90325 90325
11 Diff. Bearing Adjuster (RH) 1 31562 31562 31562 31562
Diff. Bearing Adjuster (LH) 1 110243 110243 27842 27842
12 Diff. Bearing Cup (RH) 1 90943*• 90943*• 90943*• 90943*•
Diff. Bearing Cup (LH) 1 9803*• 9803*• 9803*• 9803*•
13 Diff. Bearing Cone (RH) 1 6082*• 6082*• 6082*• 6082*•
Diff. Bearing Cone (LH) 1 27813*• 27813*• 27813*• 27813*•
14 RING GEAR & DRIVE PINION SET Matched Parts; see separate listing on page 21
Includes Item 15
15 RING GEAR BOLT & NUT KIT (5/8") 1 70745 70745 70745 70745
Bolt 16 67586 67586 67586 67586
Nut 16 60600 60600 60600 60600
RING GEAR BOLT & NUT KIT (1/2") 1 69957
Bolt 16 69117
Nut 16 67592
WHEEL DIFF. CASE KIT
Ratios 308 & 3.25 1 212202
Ratios 3.36-5.29 1 106397 106397 106397
Ratios 5.57-7.17 1 124374 124374 124374
Includes Items 16,17 & 110243
adjuster
12" O.D. -1/2" bolt 1 96794
Flanged Half 91114
11-1/2" O.D. -1/2" bolt 1 96795
Flanged Half 91116
5/8" bolt 1 124374
Flanged Half 88677

5
 Forward Tandem Axle Differential Carrier

Qty DS341, DS402(P), DS381(P), DS402(P), DS340, DS380(P),

Item 34DS
Part Name Per DS451-P DS401-P, DS451-P, DS400-P
No. 38DS
Axle Built After 4-6-89 Built Before 4-6-89 NOTE 1
16 Diff. Case (Plain Half) (NSS) 1 210017 210017 210017 210017
Diff. Case (Flanged Half) (NSS) 1
Ratios 3.08 & 3.25 127823
Ratios 3.36-5.29 103865 103865 103865
Ratios 5.57-7.17 88677 88677 88677
17 Diff. Case Cap Screw 12 96271 96271 96271 96271
WHEEL DIFF. SIDE GEAR, PINION KIT 1
Includes Items 18-22
Models: 34,340,341 114469 114469 98850 98850
38,380,381,402 114470 114470 85358 85358
400,401,451 98853 98853 98853
WHEEL DIFF. KIT LESS SIDE GEARS 1 118748 118748 118748 118748
Includes Items 19-22
18 Diff, Side Gear 2
Models: 34, 340, 341 110525 110525 37072 37072
38,380,381,402 110527 110527 37069 37069
400,401,451 85486 85486 85486
19 Side Gear Thrust Washer 2 27827* 27827* 27827* 27827*
20 Side Pinion 4 104139 104139 104139 104139
104139 replaces 37071
21 Side Pinion Thrust Washer 4 27810* 27810* 27810* 27810*
22 Spider 1 38289 38289 38289 38289
23 Output Shaft Nut 1 95205 95205 95205 95205
24 Flat Washer 1 4327* 4327* 4327* 4327*
25 Output Yoke 1 SEE INFORMATION AND CHART ON page 25.
26 Axle Housing Cover Assy 1
Includes Items 27-30
(Casting# 127708)
Cover (127781 NSS) 107320 107320
3/4" (Cover 127874) 75336 75336
1" (Cover 77749 NSS) 77750
Rear Bearing Retaining Washer 1 46583* 46583*
Not illustrated
27 Output Shaft Oil Seal NOTE 9 1 127720*• 127720*• 127720*• 127720*•
28 Bearing Snap Ring 1 45516* 45516* 45516* 45516*
29 Output Shaft Bearing & Sleeve Assy 46584 46584 46584 46584
Inner Bearing Race 1 118789*• 118789*• 118789*• 118789*•
Outer Bearing Race 1 118790*• 118790*• 118790*• 118790*•
30 Magnetic Filler Plug
3/4" 1 54254 54254
1" 1 75130 75130 75130
1" Optional 77944 77944
Hole Plug 1 90898 90898

6
 Forward Tandem Axle Differential Carrier

Qty DS341, DS402(P), DS381(P), DS402(P), DS340, DS380(P),

Item 34DS
Part Name Per DS451-P DS401-P, DS451-P, DS400-P
No. 38DS
Axle Built After 4-6-89 Built Before 4-6-89 NOTE 1
31 OUTPUT SHAFT, NUT & BUSHING KIT 1 115123 115123 98603 98603
Includes Items 23, 32-33; NOTE 3 NOTE 3
115123 also includes Items 38-39
Shaft (NSS) 34 splines, 1.750" dia. 110818 110818
Shaft (NSS) 10 splines, 1.750" dia. 85441 85441
32 Output Shaft Bushing 1 48922* 48922* 48922* 48922*
33 Output Shaft “O” Ring 2 46526* 46526* 46526* 46526*
34 Side Gear Snap Ring 2 85994* 85994* 85994* 85994*
NOTE 4
35 Output Shaft Bearing Cup (Inner) 1 110811*• 110811*• 51232*• 51232*•
36 Output Shaft Bearing Cone (Inner) 1 110812*• 110812*• 51233*• 51233*•
37 Output Shaft Side Gear 1 110810 110810 85436 85909
38 Output Shaft Spring 1 51238
39 Output Shaft Spring Thrust Bearing 1 51228
40 Inter-axle Diff. Assy
w/o Lube Pump 104509 104509 104509 95213
w/ Lube Pump 213608 104509 104509
Includes Items 41-47 NOTE 10
41 DIFF CASE KIT
w/o Lube Pump 94810 94810 94810 91850
w/ Lube Pump Order #40 94810 94810
Case Half (NSS) 2
w/o Lube Pump 102621 102621 102621 88029
w/ Lube Pump 127784 102621 102621
42 Bolt 8 85438 85438 85438 85438
43 NUT 8 57637 57637 57637 57637
DIFF SIDE PINION & SPIDER KIT 1
(Includes Items 44-47)
w/o Lube Pump 96381 96381 96381 96380
w/ Lube Pump 96381 96381
44 Side Pinion 4
w/o Lube Pump 95214 95214 95214 95210
w/ Lube Pump 95214 95414 95214
45 Side Pinion Bushing 4
w/o Lube Pump 95215* 95215* 95215* 95211*
w/ Lube Pump 95215* 95215*
46 Side Pinion Thrust WIsher 4
w/o Lube Pump 85437* 85437* 85437* 25968*
w/ Lube Pump 127785 85437* 85437*
47 Spider
w/o Lube Pump 95216 95216 95216 95212
w/ Lube Pump 127783 95216 95216
48 Helical Side Gear & Bushing Assy 1 128042 128042 85432 45476
Includes Item 49 NOTE 5
Side Gear (NSS) 128018 128018 85431 45474
49 Helical Side Gear Bushing 2 85991* 85991 * 85991* 48921*
50 Helical Side Gear Snap Ring 1 85997* 85997* 85997* 46983*
7
 Forward Tandem Axle Differential Carrier

Qty DS341, DS402(P), DS381(P), DS402(P), DS340, DS380(P),

Item 34DS
Part Name Per DS451-P DS401-P, DS451-P, DS400-P
No. 38DS
Axle Built After 4-6-89 Built Before 4-6-89 NOTE 1
51 Helical Side Gear Thrust Washer 1 85429* 85429* 85429* 45477 *
52 Helical Side Gear “D” Washer 1 45478* 45478* 45478* 45478*
53 Lockout Sliding Clutch 1 128016 128016 128016 128016
54 INPUT SHAFT, WASHER & NUT KIT
Includes Item 52 & 63 NOTE 6 NOTE 7
Models w/o Lube Pump 1 115122 115122 103289 98693
Shaft (NSS) 44 splines, 2.250" dia. 110823 110823
Shaft (NSS) 16 splines, 2.125" dia. 103283
Shaft (NSS) 10 splines, 1.969" dia. 88285
Models w/ Lube Pump 1 115126 115126 106709
Shaft (NSS) 44 splines, 2.250" dia. 110805 110805
Shaft (NSS) 16 splines, 2.125" dia. 102608
55 Input Shaft Bearing Cone 1 91136*• 91136*• 85425* 83469*
56 Input Bearing Cover, Cup & Seal Assy
Includes Items 57 & 61 NOTE 7
Models w/o Lube Pump 1 211634 110826 85423 86813
Cover (NSS) 110824 110824 85421 86811
Models w/ Lube Pump 1 211888 110808 102629
Cover (NSS) 110807 110807 102614
57 Input Bearing Cup 1 98388*• 98388*• 85424*• 83462*•
58 Input Bearing Cover Shim AR
.003" 45498* 45498* 45498* 45498*
.005" 70709* 70709* 70709* 70709*
.010" 45499* 45499* 45499* 45499*
.020" 85406* 85406* 85406* 85406*
59 Bearing Cover Cap Screw 5 113324 113324 113324 113324
60 Lockwasher 5 90414 90414
OIL SEAL & SHIM KIT 1 114465 114465 114465 114465
Includes Items 27,58,61,83 & RTV
NOTE 9
61 Oil Seal NOTE 9 1 127719*• 127719*• 127719*• 127720*•
Input Bearing Spacer 1 85427
Not illustrated
62 Input Yoke SEE INFORMATION AND CHART ON page 25.
63 Input Shaft Nut 1 95207 95207 95207 95206
64 Flat Washer 1 85404* 85404* 85404* 56864*
65 Diff. Carrier Cover Assy
Models w/o Lube Pump 1 45481 45481 45481 45481
Models w/ Lube Pump 1 102627 102627 102627
Includes Items 66-67
Cover (NSS) 102606 102606 102606
66 Pipe Plug 1" 1 90325 90325 90325
Models w/ Lube Pump
67 Expansion Plug 1 9797 9797 9797
Models w/ Lube Pump

8
 Forward Tandem Axle Differential Carrier

Qty DS341, DS402(P), DS381(P), DS402(P), DS340, DS380(P),

Item 34DS
Part Name Per DS451-P DS401-P, DS451-P, DS400-P
No. 38DS
Axle Built After 4-6-89 Built Before 4-6-89 NOTE 1
68 Carrier Cover Cap Screw
Models w/o Lube Pump (long) 5 12063 12063 12063 12063
(short) 4 90069 90069 90069 90069
Models w /Lube Pump (long) 4 12063 12063 12063
(short) 4 90069 90069 90069
(12 pt) 1 81855 81855 102605
69 Lockwasher 9 90417 90417 90417 90417
70 Magnetic Filler Screen 1 102611 102611 102611
Models w/ Lube Pump
71 LUBE PUMP REPLACEMENT KIT 1 106368 106368 106368
Models w/ Lube Pump
Includes Items 72-77
72 Pump Drive Gear 1 111448 111448 102609
73 Drive Gear Locknut 1 111451 111451 63028
Drive Gear Woodruff Key 1 81471
Not Illustrated
74 Cover “O” Ring 1 102620* 102620* 102620*
75 Cover Dowel Pin 2 102617 102617 102617
76 Cover Cap Screw 4 102618 102618 102618
77 Lockwasher 4 90419 90419 90419
78 Pinion Pilot Bearing 1 127051*• 15828*• 15828*• 15828*•
79 Pinion Bearing Cone (Inner) 1 85439*• 85439*• 85439*• 45460*•
Pinion Bearing Cone (Outer) 1 110846*• 110846*• 45460*• 45460*•
80 Pinion Bearing Spacer AR See chart on page 26
81 Pinion Bearing Cage & Cup Assy 1
Includes Item 82
Ratios 3.55 & 3.70 110731 110731 107322 107322
Cage (NSS) 110730 110730 107321 107321
Ratios 3.08, 3.25, 3.36, 3.90-7.17 110733 110733 107324 107324
Cage (NSS) 110732 110732 107323 107323
82 Pinion Bearing Cup (Inner) 1 14217*• 14217*• 14217*• 14217*•
Pinion Bearing Cup (Outer) 1 35502*• 35502*• 14217*• 14217*•
83 Pinion Bearing Cage Shim AR
.003" 45461* 45461* 45461* 45461*
.005" 62829* 62829* 62829* 62829*
.010" 45462* 45462* 45462* 45462*
.020" 62830* 62830* 61830* 62830*
.030" 45463* 45463* 45463* 45463*
84 Bearing Cage Cap Screw 6 62158 62158 62158 62158
85 Lockwasher 6 37207 37207 37207 37207
86 Pinion Helical Gear 1 110845 110845
Ratios 3.70 46977
Other Ratios 74991
34/38DSB,C 46977
34/38DSD,E 74991
87 Slotted Pinion Nut 1 118806 118806

9
 Forward Tandem Axle Differential Carrier

Qty DS341, DS402(P), DS381(P), DS402(P), DS340, DS380(P),

Item 34DS
Part Name Per DS451-P DS401-P, DS451-P, DS400-P
No. 38DS
Axle Built After 4-6-89 Built Before 4-6-89 NOTE 1
88 Roll Pin 1 118807 118807
Slotted Nut 1 NOTE 8 95206 95206
89 Air-Operated Lockout Assy
Models w/ Lube Pump 1 SEE page 16 AND page 17
Models w/o Lube Pump 1 SEE page 16 AND page 17
90 Shift Fork & Push Rod Assy
Models w/ Lube Pump 1 102613 102613 102613
Models w/o Lube Pump 1 45859 45859 45859 45859
Gasket Compound AR 107276*• 107276*• 107276*• 107276*•

NSS - Not Sold Separately

NOTE 1: Early models axles are equipped with 2-Speed differential carrier produced prior to May 1, 1978 (date code 1218). A parts listing for
these models can be found on page 11.
NOTE 2: 120924 is supplies with 11081/110812 Output Shaft Bearing Cup & Cones as well as 110810 Output Shaft Side Gear. Power Divider
must also be converted to DS341/381/401. 120923 is supplies with 110811/110812 Output Shaft Bearing Cup & Cones as well as
119896 Output Shaft Side Gear. Power Divider must also be converted to DS340/380/400 or DS341/381/401.
NOTE 3: 98603 is interchangeable with 115123 by also using a new Input Yoke.
NOTE 4: For earlier style output Shafts 46647 and 98603, use 44178 snap ring.
NOTE 5: Helical Gear Conversion Kit 113561.
NOTE 6: 103289 and 106709 interchangeable with 115122 by also using 211634 Cover, Cup & Seal Assy, 91136 Bearing Cone and new
Input Yoke.
NOTE 7: Early model axles use a ball bearing on input shaft. To convert ball bearing to taper bearing, use Kit 86967 which contains items
53, 54 & 56.
NOTE 8: Axles built prior to May 1, 1982 use 95207 self-locking nut. Later models use 118806 slotted nut plus 118807 roll pin.
NOTE 9: PLEASE REVIEW INFORMATIN ON TOP OF page 25 BEFORE ORDERING OIL SEALS.
NOTE 10: 213608 replaces P/N 104509 in models with lube pump only. Sold only as complete assembly.

10
 DS340 & DS380 Models

DS340 & DS380 Models w/2-Speed Differential Carriers

From 1972 until May 1, 1978 (date code 1218) DS340 and DS380
(forward and rear) tandems were built with 2-Speed differential
carriers. The listing below shows part number variation between
tandems built with single-speed and 2-Speed differential carriers.
Those parts identified with an * are the same as D340/D380 dual
range tandems.
Carrier design variations are shown in the adjacent illustrations.

Forward Axle Rear Axle

Single-Speed 2-Speed Single-Speed 2-Speed

Part Name (Qty. per Axle)
Carrier Carrier Carrier Carrier
Differential Carrier & Bearing Caps
Diff. Carrier & Bearing Cap Assy. (1) 120924 120926 67804 67759*
Bearing Cap Screw (4) 127179 32732* 127179 32732*
Flat Washer (4) 26772 32912* 26772 32912*
Bearing Adjuster Lock (1) 14275 45448 14275 45448
(Forward RH; Rear LH)
Lockwire (2) 12563*
Adjuster Lock Cap Screw (2) 12562 12562
Oil Trough (1) 67857 82440
Oil Trough Screw 67815 67815
(Forward 1; Rear 2)
Upper Expansion Plug (1) 30703* 30703*
Lower Expansion Plug (1) 9797* 9797*
Shift Unit Opening Cover (1) 45521* 45521*
Cap Screw (2) 20807* 20807*
Lockwasher (2) 90415* 90415*
Ring Gear & Wheel Differential (Forward RH; Rear LH)
Diff. Bearing Adjuster (1) 31562 111022 31562 111022
Diff. Bearing Cup (1) 90943 27816* 90943 27816*
Diff. Bearing Cone (1) 6082 27817* 6082 27817*
Wheel Diff. Case Kit 3.70-5.29 106397 106974 106397 106974
5.57-7.17 94799 106975 94799 106975
Drive Pinion & Pinion Bearing Cage
Lockwasher (6) 37207 37207
Basic Overhaul Kit 110593 110578 110555 110579

11
 Rear Tandem Axle Differential Carrier

Rear Tandem Axle Differential Carrier

Single Reduction

12
 Rear Tandem Axle Differential Carrier

Qty RS341,RS402, RS341, RS381,RS401, RS340,

Item Per RS451 RS402, RS451 RS380, 34RS
No. Part Name Axle Built After 4-6-89 Built Before 4-6-89 RS400 38RS
BASIC OVERHAUL KIT 1 211218* 110555* 110555* 110555*
(Contents identified with *)
BEARING KIT 1 211223• 99041• 99041• 99041•
(Contents identified with •)
Diff. Carrier & Bearing Caps 1 211219 67804 67804 67804
Carrier Casting No.(NSS) 128109 106402 106402 106402
Includes Items 1-4
2 Bearing Cap Screw 4 127179 127179 127179 127179
3 Flat Washer 4 26772 26772 26772 26772
4 Lockwire 4 90538 90538
5 Bearing Cap Adjuster Lock (RH) 1 13377 13377 13377 13377
6 Cotter Pin (RH) 1 90873 90873 90873 90873
7 Bearing Cap Adjuster Lock (LH) 1 14275 14275 14275 14275
8 Cotter Pin (LH) 1 90876 90876 90876 90876
9 Diff. Bearing Adjuster (RH) 1 110243 110243 27842 27842
Diff. Bearing Adjuster (LH) 1 31562 31562 31562 31562
10 Diff. Bearing Cup (RH) 1 9803*• 9803*• 9803*• 9803*•
Diff. Bearing Cup (LH) 1 90943*• 90943*• 90943*• 90943*•
11 Diff. Bearing Cone (RH) 1 27813*• 27813*• 27813*• 27813*•
Diff. Bearing Cone (LH) 1 6082*• 6082*• 6082*• 6082*•
WHEEL DIFF. CASE KIT
Ratios 3.08 & 3.25 1 212202
Ratios 3.36-5.29 1 106397 106397 106397
Ratios 5.57-7.17 1 124374 124374 124374
Includes Items 12-13 & 110243 adjuster
12" O.D. -1/2" bolt "1 96794
Flanged Half 91114
11-1/2" O.D. -1/2" bolt 1 96795
Flanged Half 91116
5/8" bolt 1 124374
Flanged Half 88677
12 Diff. Case (Plain Half) (NSS) 1 210017 210017 210017 210017
Diff. Case (Flanged Half) (NSS) 1
Ratios 3.08 & 3.25 127823
Ratios 3.36-5.29 103865 103865 103865
Ratios 5.57-7.17 88677 88677 88677
13 Diff Case Cap Screw 12 96271 96271 96271 96271
WHEEL DIFF. SIDE GEAR & PINION KIT
Includes Items 14-18
Models: 34,340,341 1 114469 114469 98850 98850
38,380,381,402 1 114470 114470 85358 85358
400,401,451 1 98853 98853 98853
WHEEL DIFF. KIT LESS SIDE GEARS 1 118748 118748 118748 118748
Includes Items 15-18
NSS - Not Sold Separately
NOTE 1:PLEASE REVIEW INFORMATIN ON TOP OF PAGE 25 BEFORE ORDERING OIL SEALS.
13
 Rear Tandem Axle Differential Carrier

Qty RS341,RS402, RS341, RS381,RS401, RS340,

Item Per RS451 RS402, RS451 RS380, 34RS
No. Part Name Axle Built After 4-6-89 Built Before 4-6-89 RS400 38RS
14 Side Gear 2
Models: 34,340,341 110525 110525 37072 37072
38,380,381,402 110527 110527 37069 37069
400,401,451 85486 85486 85486
15 Side Gear Thrust Washer (RH) 2 27827 27827 27827 27827
16 Side Pinion 4 104139 104139 104139 104139
104139 replaces 37071
17 Side Pinion Thrust Washer 4 27810* 27810* 27810* 27810*
18 Spider 1 38289 38289 38289 38289
19 RING GEAR & DRIVE PINION SET 1 Matched Parts; see separate listing on page 21
Includes Item 20
20 RING GEAR NUT & BOLT KIT (5/8") 1 70745 70745 70745 70745
Bolt 16 67586 67586 67586 67586
Nut 16 60600 60600 60600 60600
RING GEAR NUT & BOLT KIT (1/2") 1 69957
Bolt 16 69117
Nut 16 67592
21 Pinion Pilot Bearing 1 127051*• 15828*• 15828*• 15828*•
22 Pinion Bearing Cone (Inner) 1 45460*• 12496*• 12496*• 12496*•
Pinion Bearing Cone (Outer) 1 12496*• 12496*• 12496*• 12496*•
23 Pinion Bearing Spacer AR See chart on page 26
24 Pinion Bearing Cage & Cup Assy
Includes Item 25
Ratios 3.55 & 3.70 1 127039 75108 75108
Cage (NSS) 127038 75107 75107
Ratios 3.08, 3.25, 3.36, 3.90-7.17 1 107496 75110 75110
Cage (NSS) 107495 75109 75109
34/38RSB,C 1 75108
34/38RRD,E 75110
25 Pinion Bearing Cup (Inner) 1 14217*• 12495*• 12495*• 12495*•
Pinion Bearing Cup (Outer) 1 12495*• 12495*• 12495*• 12495*•
OIL SEAL & SHIM KIT 1 213763 213764 213764 213764
Includes Items 26,28 & RTV NOTE 1
26 Pinion Bearing Cage Shim AR
.003" 107567* 43588* 43588* 43588*
.005" 107568* 107568* 107568* 107568*
.010" 107569* 43589* 43589* 43589*
.020" 107570* 107570* 107570* 107570*
.030" 43590* 43590* 43590*
27 Bearing Cage Cap Screw 6 113325 113325 113325 113325
28 Oil Seal NOTE 1 1 127721*• 127721*• 127721*• 127721*•
29 Input Yoke 1 SEE INFORMATION AND CHART ON PAGE 25.
NSS - Not Sold Separately
NOTE 1:PLEASE REVIEW INFORMATIN ON TOP OF PAGE 25 BEFORE ORDERING OIL SEALS.

14
 Rear Tandem Axle Differential Carrier

Qty RS341,RS402, RS341, RS381,RS401, RS340,

Item Per RS451 RS402, RS451 RS380, 34RS
No. Part Name Axle Built After 4-6-89 Built Before 4-6-89 RS400 38RS
30 Pinion Nut 1 95206 95206 95206
Ratio 3.70-4.33 (1-31/32" spline) 1 95206
4.33-7.17 (1-3/4" spline) 1 95205
31 Flat Washer 1 56864* 56864*• 56864*• 4327*•
Gasket Compound AR 107276*• 107276*• 107276*• 107276*•
NSS - Not Sold Separately
NOTE 1:PLEASE REVIEW INFORMATIN ON TOP OF PAGE 25 BEFORE ORDERING OIL SEALS.

15
 Differential Lockout (Forward Axle)

Differential Lockout (Forward Axle)

Current Production Model

Item Spicer
No. Part Name Axle Part No. Remarks
Air-Operated Lockout Assy. 1 123216 w/ lube pump
Includes Items 1-10 1 123217 w/o lube pump
REPAIR KIT 1 211197 w/lube pump
Includes Items 5-9 211198 w/o lube pump
1 Cap Screw 2 210381
2 Lockwasher 2 90415
PISTON KIT 1 121332 w/ lube pump
Includes Items 3-8 1 121333 w/o lube pump
3 Mounting Bracket 1 127675
4 Piston Housing 1 119923
5 Locknut 1 128160
6 Piston 1 119913 Models w/ lube pump
1 119912 Models w/o lube pump
7 Piston “O” Ring 1 210180
8 Shoulder Washer 1 210452
9 Compression Spring 1 31038
10 Shift Fork & Push Rod Assy. 1 102613 Models w/ lube pump
1 45859 w/o lube pump

16
 Differential Lockout (Forward Axle)

Differential Lockout (Forward Axle)

Non-Current Production Model

Qty. Navistar
Item per Standard Reversed-Air
No. Part Name Axle Part No. Part No. Remarks
Air-Operated Lockout Assy NSS (Note 1) 1 58421 96919 Models w/o lube pump
Includes Items 1-19 unless noted NSS (Note 1) 1 104600 107621 Models w/ lube pump
DIFFERENTIAL AIR LOCKOUT RETROFIT KIT (Note 1) 1 211200 Models w/o lube pump
1 211199 Models w/ lube pump
LOCKOUT BODY KIT 1 34779 Models w/o lube pump
Includes Items 1-9 1 104599 Models w/ lube pump
AIR LOCKOUT SERVICE KIT 1 211201 211202 Models w/o lube pump
Includes Items 3-8, 12, 16, 18-20
1 Shift Cylinder Body 1 32828 96913
2 Shift Cylinder Piston 1 32834 96915
3 Piston Stop 1 102616 Models w/ lube pump
4 Piston Grommet 1 32832 32832
5 Piston Felt Oiler 2 96916 96916
6 Push-Rod Grommet 1 32826
7 Push-Rod Flat Washer 1 111406 111406
8 Cover Grommet 1 60817 60817
9 Body Cover 1 32831 32831 Models w/o lube pump
Body Cover 1 32831 32831 Models w/ lube pump
10 Cover Cap Screw 4 79363 79363
11 Lockwasher 4 90419 90419
12 Push-Rod Nut 1 90206 90206
13 Body Cap Screw 2 90031 90031
14 Lockwasher 2 90415 90415
15 Shift Fork Assy 1 45859 96715 Models w/o lube pump
Shift Fork Assy 1 102613 107620 Models w/lube pump
NOTE 1: Air-Operated Lockout Assembly 58421 and 104600 are no longer available. If it is necessary to repair complete unit, use Differential
Air Lockout Retrofit Kits 211200 or 211199.

17
 Differential Lockout (Forward Axle)

Qty. Navistar
Item per Standard Reversed-Air
No. Part Name Axle Part No. Part No. Remarks
16 Compression Spring 1 31038 126705
17 Cover Reducer Bushing 1 108223 Models w/ lube pump
18 Push-Rod to Piston Seal Ring 1 96912
19 Push-Rod to Body “O”Ring 1 96911
20 Gasket Compound AR 107276 107276
NOTE 1: Air-Operated Lockout Assembly 58421 and 104600 are no longer available. If it is necessary to repair complete unit, use Differential
Air Lockout Retrofit Kits 211200 or 211199.

18
 Axle Housing & Axle Shafts

Axle Housing & Axle Shafts

Item Spicer
No. Part Name Axle Part No. Remarks
Axle Shaft 2 Length Flange Holes OEMs*
34D, D340 56980 40-29/32" 12 (.783") taper holes
16 splines, 1.980 O.D. 62165 41-5/16" 12 (.750") taper holes
D341 110882 40-29/32" 12 (.783") taper holes 1
39 splines, 2.000" O.D. 110886 41-5/16" 12 (.745") taper holes 3
38D, D380 (P) 56981 40-1/8" 8 (.760") thru holes
16 splines, 2.125" O.D. 80929 40-5/8" 6 (.843") taper holes
62166 41-5/16" 8 (.948") taper holes
76917 41-5/16" 6 (.635") thru holes
81216 41-19/32" 8 (.948") taper holes
D381 (P), D402 (P) 110887 40-1/8" 8 (.760") thru holes
41 splines, 2.100" O.D. 126877 40-5/8" 8 (.948") taper holes 1
110883 41-5/16" 8 (.640") taper holes 3,7
110888 41-5/16" 6 (.635") thru holes 2,5,6
110884 41-19/32" 8 (.948") taper holes 1
127008 44-3/8" 8 (.635") thru hole 5,6
D400-P, D401-P 88192 41-3/8" 8 (.640") taper holes 1
33 splines, 2.125" O.D. 91133 41-3/8" 8 (.635") thru holes 6
94224 40-13/32" 8 (.750") thru holes
99407 41-7/32" 8 (.635") thru holes 2,5,6
2 Hub Bearing Adjuster Nut (see Note 1) 4 19186** (0.47" thick) D341, 34D
(Forward and Rear Axles) 78944 (3/8" thick) D381, 381-P, 402, 402-P, 38D
(varies by OEM) 95372 (0.562" thick) D381, 381-P, 402, 402-P, 38D
11249** (17/32" thick) all except D341
2 119881 (outer) all except D341
2 119882 (inner) all except D341
3 Bearing Adjuster Lockwasher (see Note 1) 2 30714
(Forward and Rear Axles) 11245
(*varies by OEM) 119883 all except D341
4 Axle Housing Assy (forward & rear) 1 See OEM Catalog
*OEMs - 1-Ford, 2-Freightliner, 3-GMC, 4-Navistar, 5-Kenworth, 6-Peterbilt, 7-White.
**Hub Bearing Adjuster Nut Wrench is available, nut 19186, use wrench 15751; nut 11249, use wrench 24042.
Note 1: Wheel Nut & Lock Kit #121343 contains 2 each 119881 outer nut, 119882 inner nut, 119883 nut lock and instruction sheet. This kit
is recommended when servicing all D381 thru D451 axles. However, the individual parts are not interchangeable with existing parts.
19
 Ring Gear and Pinion Identification

Ring Gear and Pinion Identification

Ring Gear and Drive Pinion are matched parts and must be replaced
in sets.
Complete identification is stamped on both parts shown in the
adjacent drawing.
Order by Spicer “Set No.” which includes drive pinion nut.

Drive Pinion and Ring Gear Set

Forward Axles
DS341, 402, 402-P, 451-P DS341, 381, 381-P, 401-P, 402, 402-P, 451-P
Units Built After 4-6-89 Units Built Before 4-6-89
Pinion Spline; 41, 2.100" dia. Pinion Spline; 41, 2.100" dia.
Single Reduction Single Reduction

Ratios Gear Set Gear (NSS) Pinion (NSS) Ratios Gear Set Gear (NSS) Pinion (NSS)
3.08* 212901 128023 (37T) 128024 (12T) 3.36* 120761 120042 (37T) 120041 (11T)
3.25* 212145 127884 (39T) 127885 (12T) 3.55* 111174 109867 (39T) 111139 (11T)
3.36* 127265 120042 (37T) 127065 (11T) 3.70* 111175 88000 (37T) 111140 (10T)
3.55* 127266 109867 (39T) 127066 (11T) 3.90 111176 99742 (39T) 111141 (10T)
3.70* 127267 88000 (37T) 127067 (10T) 4.11 111177 86356 (37T) 111142 (9T)
3.90 127268 99742 (39T) 127068 (10T) 4.33 111178 86358 (39T) 111143 (9T)
4.11 127269 86356 (37T) 127069 (9T) 4.56 111179 86360 (41T) 111144 (9T)
4.33 127270 86358 (39T) 127070 (9T) 4.88 111180 86362 (39T) 111145 (8T)
4.56 127271 86360 (41T) 127071 (9T) 5.29 111181 86364 (37T) 111146 (7T)
4.88 127272 86362 (39T) 127072 (8T) 5.57 111182 86366 (39T) 111147 (7T)
5.29 127273 86364 (37T) 127073 (7T) 6.14 111183 86877 (43T) 111148 (7T)
5.57 127274 86366 (39T) 127074 (7T) 6.50 111184 86878 (39T) 111149 (6T)
6.14 127275 86877 (43T) 127075 (7T) 7.17 111185 86879 (43T) 111150 (6T)
6.50 127276 86878 (39T) 127076 (6T) *16" gearing
7.17 127277 86879 (43T) 127077 (6T)
*16" gearing

21
 Axle Housing & Axle Shafts

Item Spicer
No. Part Name Axle Part No. Remarks
5 Axle Housing Cover (forward axle only) 1
6 Axle Housing Cover Locating Dowel 2 7641
7 Axle Housing Cover Cap Screw 1 119784
8 Axle Housing Cover Stud 11 47500
9 Nut 11 42364
10 Lockwasher 11 90415
11 Magnetic Drain Plug 54254
12 Magnetic Filler Plug (rear axle) 54254 3/4"
(not illustrated) 75130 1"
DIFF. CARRIER ATTACHING PARTS
FORWARD AXLE
13 Stud 10 36435
14 Nut 10 90208
15 Lockwasher 10 90422
16 Cap Screw 2 38589
17 Lockwasher 2 90422
REAR AXLE
13 Stud 12 36435
14 Nut 12 90208
15 Lockwasher 12 90422
*OEMs - 1-Ford, 2-Freightliner, 3-GMC, 4-Navistar, 5-Kenworth, 6-Peterbilt, 7-White.
**Hub Bearing Adjuster Nut Wrench is available, nut 19186, use wrench 15751; nut 11249, use wrench 24042.
Note 1: Wheel Nut & Lock Kit #121343 contains 2 each 119881 outer nut, 119882 inner nut, 119883 nut lock and instruction sheet. This kit
is recommended when servicing all D381 thru D451 axles. However, the individual parts are not interchangeable with existing parts.

Axle Housings
(forward and rear)
All drive axles are mounted in Spicer@ fabricated steel axle hous-
ings. These housings are developed to meet specific OEM require-
ments for dimensions, suspension mounting and brakes. If housing
replacement is necessary, provide the truck dealer with the follow-
ing information:
a. Year, make and model of the truck.
b. Axle model and ground loading capacity.
c. Axle specification number.
d. Type of brakes used.

Axle Shafts
(forward and rear)
These axles will be found with a number of different axle shafts, on
the basis of OEM specification. When ordering replacement axle
shafts, note the part number stamped into the flange.

20
 Ring Gear and Pinion Identification

Drive Pinion and Ring Gear Set

Rear Axles
RS341, 402, 451 RS341, 381, 401, 402, 451
Pinion Spline; 39, 2.000" dia. Pinion Spline; 39, 2.000" dia.
Single Reduction Single Reduction

Ratios Gear Set Gear (NSS) Pinion (NSS) Ratios Gear Set Gear (NSS) Pinion (NSS)
3.08* 212902 128025 (37T) 128026 (12T) 3.36* 120763 120045 (37T) 120044 (11T)
3.25* 212146 127886 (39T) 127887 (12T) 3.55* 111501 109862 (39T) 111466 (11T)
3.36* 127252 120045 (37T) 127052 (11T) 3.70* 111502 88013 (37T) 111467 (10T)
3.55* 127253 109862 (39T) 127053 (11T) 3.90 111503 99746 (39T) 111468 (10T)
3.70* 127254 88013 (37T) 127054 (10T) 4.11 111504 86372 (37T) 111469 (9T)
3.90 127255 99746 (39T) 127055 (10T) 4.33 111505 86374 (39T) 111470 (9T)
4.11 127256 86372 (37T) 127056 (9T) 4.56 111506 86376 (41T) 111471 (9T)
4.33 127257 86374 (39T) 127057 (9T) 4.88 111507 86378 (39T) 111472 (8T)
4.56 127258 86376 (41T) 127058 (9T) 5.29 111508 86380 (37T) 111473 (7T)
4.88 127259 86378 (39T) 127059 (8T) 5.57 111509 86880 (39T) 111474 (7T)
5.29 127260 86380 (37T) 127060 (7T) 6.14 111510 86881 (43T) 111475 (7T)
5.57 127261 86880 (39T) 127061 (7T) 6.50 111511 86882 (39T) 111476 (6T)
6.14 127262 86881 (43T) 127062 (7T) 7.17 111512 86883 (43T) 111477 (6T)
6.50 127263 86882 (39T) 127063 (6T) *16" gearing
7.17 127264 119237 (43T) 127064 (6T)
*16" gearing

22
 Gear Sets

Gear Sets
The charts on these pages indicate how many axle models can be serviced using the new high-torque gear sets when slight modifications are
made. In all cases, the "replace with" column is upgraded gear sets.

Forward Axle Models: DS340, DS380, DS380-P, DS400-P (Single Reduction)

Current Replace
Ratio Pinion Splines: 41, 2.100" dia.
Part No. with
3.55 110862 111174
Plus Items listed below and 110731 cage & cup
3.70 95557 111175
3.90 99745 111176
4.11 95558 111177
4.33 95559 111178
4.56 95560 111179
4.88 95561 111180
Plus items listed below and 110733 cage & cup
5.29 95562 111181
5.57 95563 111182
6.14 95564 111183
6.50 95565 111184
7.17 95566 111185
Plus 110844 Helical & Bushing, 110845 Pinion Helical, 110736 thru 110803 Pinion Bearing Spacer (as req'd), 110846 Outer Pinion Bearing
Cone (118806 slotted nut and 118807 roll pin are included w/gear set).
Note: These changes can be applied to 34DS and 38DS, if power divider conversion is also used.
When changing ratios:
3.55-5.29 to 5.57-7.17 use Case Kit 94799 & 110733 Cage & Cup Assembly.
5.57-7.17 to 3.55-5.29 use Case Kit 106397 & 110731 Cage & Cup Assembly.

23
 Gear Sets

Rear Tandem Axles: 34RS, 38RS, RS340, RS380, RS400 (Single Reduction)
Single Drive Axles: 17100-1,17120-1,18100-1,18120-1 (Single Reduction)

Bolt Hole 1/2" 1/2" 5/8" 5/8"

Gear Dia. 16" 16-1/2" 16" 16-1/2" RS340,
Models 17-18100-1 17-18120-1 17-18100-1 17-18120-1 380, 400
34/38RSB,C 34/38RSD,E 34/38RSB,C 34/38RSD,E

Replace
Ratio: Current Part Numbers with Pinion Splines: 9, 2.000" dia.
3.55 110864 111501 17, 18, 34, 38 Series Only
3.70 96619 96619 96641 111502 Plus 106397 Case Kit &
New Input Yoke
3.90 99749 111503
4.11 96620 96620 96642 111504
4.33 96621/99930 96621/99930 96643 111505 340, 380, 400 Series Only
4.56 96622 96622 96644 111506 Plus new Input Yoke
4.88 96623 96623 96645 111507 17, 18, 34, 38 Series Only
5.29 96624 96624 96646 111508 (w/ 1/2" bolt holes)
Plus 94799 Case Kit &
5.57 96625 96626 96625 96626 96647 111509
New Input Yoke & 120780 Nut &
6.14 96627 96627 96648 111510 Bolt Conversion Kit
6.50 96628 96628 96649 111511 340, 380, 400 Series Only
7.17 96629 96629 96650 111512 Plus New Input Yoke
When changing ratios:
3.55-3.70 to 3.90-7.17 use 75110 Cage & Cup Assembly
3.90-7.71 to 3.55-3.70 use 75108 Cage & Cup Assembly

24
 Input and Output Yokes

Input and Output Yokes Forward Axle Models

During the 4th Quarter of 1990, Spicer began using new seals and New Input (Yoke & Mudslinger Assy.)
yoke & slingers on the models in this publication. The new seals 44 Involute - 2.25" Spline
and slingers are noticeably different from the current seals and will
Yoke Assy.
affect interchangeability. Yoke Joint Yoke & Oil
Style & Oil
Series Angle Slinger Seal
• The upgraded seals can be used on axles originally equipped Seal Kit
with the old seals.
1610 (22°) B 127750 127719 213172
• Spicer recommends the replacement of old yoke & slinger 1710 (27.5°) C 127754 127719 213169
assemblies when the new seals are installed; however, the old
1710 (27.5°) B 127752 127719 213174
yokes and slingers will work with the new seals.
1760 (30°) C 127755 127719 213170
• New yoke and slinger assemblies cannot be used with the old
seal design on the forward tandem axles. 1760 (30°) B 127751 127719 213173
1810 (30°) C 127753 127719 213169
• New yoke and slinger assemblies can be used with the old seal
on the tandem rear pinions. 1810 (30°) B 127749 127719 213171

• Yoke Assembly & Oil Seal Kits contain oil seal, yoke & slinger
and instructions. New Output Yoke (Yoke & Mudslinger Assy.)
• Most non-Spicer aftermarket seals will not be compatible with 34 Involute - 1.75" Spline
the new Spicer yoke and slinger assemblies. Yoke Assy.
Yoke Joint Yoke & Oil
• Spicer recommends the use of special installation tools conve- Style & Oil
Series Angle Slinger Seal
niently packaged in the single kit (listed below). Seal Kit
1610 (29.5°) C 127741 127720 213178
1610 (45°) C 127738 127720 213175
1710 (45°) C 127740 127720 213177
1710 (33.5°) C 127739 127720 213176

Rear Axle Models

New Pinion Yoke
New Input (Yoke & Mudslinger Assy.)
39 Involute - 1.95" Spline
Yoke Assy.
Yoke Joint Yoke & Oil
Style & Oil
Oil Seal Driver Installation Kit 212139 Includes: Series Angle Slinger Seal
Seal Kit
• Instruction Sheet
1610 (23°) C 127746 127721 213183
• 126917 Driver Seal (Forward Input & Rear Pinion) 1610 (35.5°) C 127745 127721 213182
• 127787 Driver Seal Adapter (Forward Input) 1610 (45°) C 127743 127721 213180
• 127786 Driver Seal (Forward Output) 1710 (33.5°) C 127744 127721 213181
1710 (45°) C 127742 127721 213179

B - Half Round (Brg. Strap - Tapped Holes)

C - Full Round
For more information, see Technical Service Bulletin 90-06

25
 Pinion Bearing Spacers

Pinion Bearing Spacers

34DS, 38DS, DS340, DS380(P), DS400-P, 34RS, DSS341, DS381(P), DS401-P, DS402(P)
38RS, RS340, RS380, RS400, RS341, RS381,
RS401, RS402 .472"-110736 .484"-110748 .496"-110784
.623"-91552 .634"-91564 .645"-91602 .473"-110737 .485"-110749 .497"-110788
.624"-91553 .635"-91566 .646"-91604 .474"-110738 .486"-110750 .498"-110790
.625"-91554 .636"-91568 .647"-91606 .475"-110739 .487"-110752 .499"-110792
.626"-91555 .637"-91572 .648"-91608 .476"-110740 .488"-110754 .500"-110794
.627"-91556 .638"-91576 .649"-91610 .477"-110741 .489"-110756 .501"-110796
.628"-91557 .639"-91580 .650"-91611 .478"-110742 .490"-110760 .502"-110798
.629"-91558 .640"-91584 .651"-91612 .479"-110743 .491"-110764 .503"-110799
.630"-91559 .641"-91588 .652"-91613 .480"-110744 .492"-110768 .504"-110800
.631"-91560 .642"-91592 .653"-91614 .481"-110745 .493"-110772 .505"-110801
.632"-91561 .643"-91596 .654"-91615 .482"-110746 .494"-110776 .506"-110802
.633"-91562 .644"-91600 .483"-110747 .495"-110780 .507"-110803

26
 Power Divider Conversion Kit

Power Divider Conversion Kit

Axle Models:
34D,38D,42D,D340,D380
(all gearing - models w/o pump) D380-P, D400-P to High Torque
(use Swing Unit for pump conversion) w/Lube Pump
Current Replace Current Replace
Part No. with Part No. with
87103 118764 Power Divider Conversion Kit 106709 115126 Input Shaft Kit, and
or 102629 211888 Cover, Cup & Seal Assembly, and
45478 45478 “D” Washer; and 46977 or 113556 Pinion Helical Gear (10 splines), and
45498 45498 0.003" shim, and 74991
45499 45499 0.005" shim, and 85432 128042 Helical Side Gear & Bushing, and
70709 70709 0.005" shim, and 85425 91136 Bearing Cone, and Input Yoke A
85404 85404 Flat Washer, and 115126 Input Shaft Kit, and
85406 85406 0.020" shim, and
85423 211634 Cover, Cup & Seal Assembly, and
85425 91136 Bearing Cone, and
Available Yoke Tag
85427 Not Used
Spicer Yoke
85429 85429 Thrust Washer Yoke Series
Part No.
85432 128042 Helical Side Gear & Bushing, and
127753 1810 (30°)
85436 85436 Output Shaft Side Gear, and
127754 1710 (27.5°)
85994 85994 Output Shaft Snap Ring, and
127755 1760 (30°)
85997 85997 Helical Gear Snap Ring, and
87104 See chart (available yoke tag)
95207 95207 Nut, and PLEASE REVIEW INFORMATION ON TOP OF PAGEpage 25
103283 110823 Input Shaft, and BEFORE ORDERING YOKE & SLINGERS.
104509 104509 Inter-axle Differential, and
107276 107276 RTV Sealant, and
109069 109069 Torque Tag, and
113556 Pinion Helical Gear (10 Spline)

27
 Helical Gear Conversion Kit #113561

Helical Gear Conversion Kit #113561

This kit was designed to upgrade D340/D380 helical gears with the For Axle Models D340, D380, D380-P, D400-P, when using
same product improvements that were incorporated into the high- original pinion and ring gear set. All ratios. All gearing
torque tandems. The helical gears in this kit are a 5-pitch design, types.
versus the original 7-pitch design, which makes them approxi-
mately 39 percent stronger. This improvement is particularly desir- If new pinion and ring gear set is used during rebuild, use instruc-
able for axles used with high-torque engines and fast ratios. tions for helical gears in gear set section (page 23).

The pinion helical gear in this kit has 10 splines to accommodate all
D340/D380 pinions, regardless of ratio. The helical side gear and Replaces
bushing assembly is identical to the D341/D381 helical gear and is Current
compatible with the sliding clutch, inter-axle differential, input shaft 113561 Kit includes: Part No.
and output shaft side gears. Because the pitch is different, these
128042 Helical Side Gear & Bushing 85432
gears will have to be replaced as a set, but once installed can later
be serviced with individual parts. 113556 Pinion Helical Gear (10 splines) 46977 or 74991
Note: Kit must be used if changing either current helical gear.

28
 Differential Carrier Assembly

Differential Carrier Assembly

These carrier assemblies are complete, less input yoke.
Side Gear DS402 DS402-P DS451-P RS402 RS451
Ratio DS341 DS341-P DS381 DS381-P DS401-P RS341 RS381 RS401

(Involute
39 39 41 41 33 39 41 33
Splines)
3.08* 674686 674628 674629
3.25* 674687 952126 674692
3.36* 951907 951908 674456 674462 951913 951909 674468 951914
3.55* 951150 951174 674457 674463 674574 951320 674469 674575
3.70* 951151 951175 674458 674464 674474 951321 674470 674479
3.90 951152 951176 674459 674465 674475 951322 674471 674480
4.11 951153 951177 674460 674466 674476 951323 674472 674481
4.33 951154 951178 674461 674467 674477 951324 674473 674482
4.56 951155 951179 674633 674635 674478 951325 674634 674483
4.88 951156 951180 674688 674703 674566 951326 674693 674567
5.29 951157 951181 674689 674704 951205 951327 674694 951351
5.57 951158 951182 674690 951194 951206 951328 674695 951352
6.14 951159 951183 674691 951195 951207 951329 674696 951353
6.50 951160 951184 951172 951196 951208 951330 674697 951354
7.17 951161 951185 951173 951197 951209 951331 951343 951355
*16" gearing

These hybrid diff. carrier assemblies were introduced in 1985. Because of Spicer's unique interchangeability, one hybrid tandem replaces sev-
eral generations tandems in the same ratio and gearing type. These new carriers contain old straight spline gears (except 400 and 401 series
which use the same side gears). New yokes are required to use the new carrier (see instructions on page 30).
Hybrid Hybrid Hybrid Hybrid Hybrid Hybrid
DS341 DS341-P DS 381 DS381-P RS341 RS381
Replaces:
Side Gear 34DS 38DS 34RS 38RS
Ratio DS340 DS340-P DS380 DS380-P RS34O RS380

(Straight
16 16 16 16 16 16
Splines)
3.36*
3.55* 951693 951705 674551 951807 951717 674573
3.70* 951694 951706 674448 951808 951718 674451
3.90 951695 951707 674552 951809 951719 674553
4.11 951696 951708 674449 951810 951720 674452
4.33 951697 951709 674450 951811 951721 674453
4.56 951698 951710 951800 951812 951722 951824
4.88 951699 951711 951801 951813 951723 951825
5.29 674512 951712 674576 951814 674513 674577
5.57 951701 951713 951803 951815 951725 211991
6.14 951702 951714 951804 951816 951726 951828
6.50 951703 951715 951805 951817 951727 951829
7.17 951704 951716 951806 951818 951728 951830
*16" gearing

29
 Yoke Selection Guide

Yoke Selection Guide

(when using Hybrid Diff. Carrier)
34D/D380 and D340/380/400 carrier assemblies can be replaced by
new 0341/381/401/402 carrier assemblies. These new carriers con-
tain old straight spline side gears (except 400 and 401 series which
use the same side gears).
New yokes (shown below) are required to use the new carrier. With
your old yokes removed, measure the dimensions shown and
choose new yokes to match your old yoke dimensions.

PLEASE REVIEW INFORMATION ON TOP OF PAGE 25 BEFORE

ORDERING YOKE & SLINGERS.

Rear Axle
Forward Axle A B C Part
Dim. Dim. Dim. Number
Old A A B C Part
Dim. Dim. Dim. Dim. Number Input w/mudslinger - 39 involute splines

Input w/mudslinger - 44 involute splines 1610 4.718" 1.876" 5.312" 127746

1710 5.190" 1.939" 6.093" 127754 1610 5.310" 1.876" 5.312" 127745

1760 5.250" 1.939" 7.001" 127755 1610 6.000" 1.876" 5.312" 127743

1810 5.250" 1.939" 7.551" 127753 1710 5.250" 1.939" 6.093" 127744

Output w/mudslinger - 34 involute splines 1710 6.125" 1.939" 6.093" 127742

1610 4.748" 4.938" 1.876" 5.312" 127741 NOTE: The "A" Dimension on old-style output yokes will be .190"
shorter because of the elimination of the rear bearing retaining
1610 6.000" 6.190" 1.876" 5.312" 127738
washer on the new family of axles.
1710 5.250" 5.440" 1.939" 6.093" 127739
1710 6.123" 6.313" 1.939" 6.093" 127740
NOTE: The "A" Dimension on old-style output yokes will be .190"
shorter because of the elimination of the rear bearing retaining
washer on the new family of axles.

30
 Yoke Selection Guide

Wheel Differential Kits

NEW!
Wheel Diff. Side Pinion Kit which contains spider, side pinions, side
gear thrust washers, and side pinion thrust washers.
With this one kit - 118748 - and loose side gears, you can service
all three generations of highway tandems.
Wheel Diff. Kits
Wheel Diff. Side Pinion Kit (Includes Side Gear, Side Pinions,
Thrust Washers & Spider)

NEW! Side Spline

Kit No. Axle Model Gear Info.
118748 34, 340 Series 37072 16 Str. 98850
(contains: 341 Series 110525 39 Inv. 114469
side pinion 104139, 38, 380 Series 37069 16 Str. 85358
spider 38289, 381 Series 110527 41 Inv. 114470
and thrust washers 400, 401 Series 85486 33 Inv. 98853
27810 and 27827)

31
Dana Aftermarket Group
PO Box 321
Toledo, Ohio 43697-0321

Warehouse Distributors: 1.800.621.8084

OE Dealers: 1.877.777.5360

www.spicerparts.com

AXIP-0089 Printed in U.S.A.

Copyright Dana Limited, 2012.
All rights reserved. Dana Limited.