Scribd Logo
Upload

Welcome to Scribd!

  • 47 views

    Exp No: 2 Date: 21/08/19 Design of Shear Connection: S.No Description Values Value 1 Value 2 Unit

    Uploaded by

    Sivaprasanth Babu
    This document summarizes the design of a shear connection between a beam and column. It includes material properties, member properties, calculated forces and moments, and the proposed bolt configuration. The connection uses 4 bolts with a diameter of 20mm and grade of 4.6 Fe410 to transmit the 110KN end reaction force, with 2 additional bolts to seat the angle leg to the beam flange. All calculated forces are below the capacity of the members.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Exp No: 2 Date: 21/08/19 Design of Shear Connection: S.No Description Values Value 1 Value 2 Unit

    Uploaded by

    Sivaprasanth Babu
    47 views1 page
    This document summarizes the design of a shear connection between a beam and column. It includes material properties, member properties, calculated forces and moments, and the proposed bolt configuration. The connection uses 4 bolts with a diameter of 20mm and grade of 4.6 Fe410 to transmit the 110KN end reaction force, with 2 additional bolts to seat the angle leg to the beam flange. All calculated forces are below the capacity of the members.

    Original Description:

    xl

    Original Title

    exl

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the design of a shear connection between a beam and column. It includes material properties, member properties, calculated forces and moments, and the proposed bolt configuration. The connection uses 4 bolts with a diameter of 20mm and grade of 4.6 Fe410 to transmit the 110KN end reaction force, with 2 additional bolts to seat the angle leg to the beam flange. All calculated forces are below the capacity of the members.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    47 views1 page

    Exp No: 2 Date: 21/08/19 Design of Shear Connection: S.No Description Values Value 1 Value 2 Unit

    Uploaded by

    Sivaprasanth Babu
    This document summarizes the design of a shear connection between a beam and column. It includes material properties, member properties, calculated forces and moments, and the proposed bolt configuration. The connection uses 4 bolts with a diameter of 20mm and grade of 4.6 Fe410 to transmit the 110KN end reaction force, with 2 additional bolts to seat the angle leg to the beam flange. All calculated forces are below the capacity of the members.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 1

    EXP NO : 2

    DATE : 21/08/19

    DESIGN OF SHEAR CONNECTION


    S.NO DESCRIPTION VALUES
    VALUE 1 VALUE 2 UNIT
    1 fu 410 Mpa
    2 Grade of bolt 4.6
    3 fyw 250 MPa
    4 fub 400 Mpa
    5 Partial safety factor
    6 ymb 1.25
    7 ymo 1.1
    8 Property ISMB 250 ISHB 200
    9 width of flange, tf 125 200 mm
    10 Thickness of web, tw 6.9 6.1 mm
    11 Thickness of flange,tf 12.5 9 mm
    12 Gauge, g 55 mm
    13 Radius at the root, R1 13
    14 End reaction R 110 KN
    15
    16 Bearing length of the seat b 70.14 mm
    17 angle section leg length l 75 mm
    18 Clearance b/w beam and column 3 mm
    19 Outstanding leg length 73.14 < 75 mm
    20 Length of bearing on seat, b1 44.64 mm
    21 Distance of end of bearing on seat 25.64 mm
    22 to root of angle,b2
    23 Moment at the critical section, M 809.9804659 KNm
    24 Moment capacity of the angle leg, Md 818.1818182 > 809.980 KNm
    25 Shear capacity of outstanding leg 196.8297292 > 110 KN
    26 Vdsb 45.26558891 KN
    27 No of bolts, n 2.430102041 which is equivalent to 4 bolts
    28 Provide 20mm dia bolts of grade 4.6 Fe410 , 4 bolts in number at a pitch of 60mm
    29 Provide 20mm dia bolts of grade 4.6 Fe410 , 2 bolts in number to seat leg with flange

    You might also like