A B C D E F G H J K L M N P R S

L-08092-8 ITEM PART NO. REQ'D NAME

1
4837.2
[190.4]
11

3350.4 3497.8 4171.3

[131.9 ] [137.7 ] [164.2 ]

18 6

E 7

1555
[61.2 ]
4

1335
[52.6 ]

12

5 Z

A
3210.6 698.7
[126.4] [27.5 ] 1

518.2
6 [20.4 ]

482.4
[19.0 ]

200.9
[7.9 ]
5

0 CRANKSHAFT
7 [.0 ]

437
[17.2 ]
8
589.7
[23.2 ]

2 PRICE CODE:
P2712J2
899
[35.4 ]

9 35 L B
M 20 C
REFERENCE NOTES:
1998.7
454 145 115 [78.7] 3167.5 4079.2 4172.7 4318.7 1. OVERALL LENGTH OF ENGINE: 4750.3 [187.0]
[17.9 ] [5.7 ] [4.5 ] [124.7 ] [160.6 ] [164.3 ] [170.0 ] OVERALL WIDTH OF ENGINE: 2281.5 [89.8]
OVERALL HEIGHT OF ENGINE: 2701.5 [106.4]
0
[.0 ]
10 REAR FACE RIGHT SIDE VIEW
OF
CRANKCASE
ECO 157101
REV NO 103
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS.
MACHINE DIMENSION TOLERANCE STANDARD -
SURFACE FINISH STANDARD -
DIMENSIONING AND TOLERANCING STANDARD - ASME Y14.5M, LATEST VERSION.
FABRICATION TOLERANCES -
MATERIAL: - REF. L-08092-7
11
HEAT TREATMENT:
NAME:
THIS PRINT IS PROVIDED ON A RESTRICTED BASIS NOT TO BE USED
INSTALLATION
IN ANY WAY DETRIMENTAL TO THE INTEREST OF WAUKESHA ENGINE DIVISION.
MODELS C.C.
DRAWING
12V275GL+

157101 07-14 ADDED PRICE CODE. SEE SHEETS 2-5 FOR CHANGES. FILE PART NO.
12 156928 04-14 SEE SHEET 3 FOR CHANGES L-08092-8
155229 01-13 RELEASED. SUPERSEDES L-08092-7.
DR: MAO DATE: 01-14-13APP:
CHK: RHN DATE: 01-31-13APP:
CJN DATE:
DATE:
01-31-13
D SHT. 1 OF 5 SCALE: 0.100
 A B C D E F G H J K L M N P R S
L-08092-8 ITEM PART NO. REQ'D NAME

1 12X 0.75-10UNC-2B
40 MIN. A
6 18 692.15 B.C
11
[27.25 ]

12X 30 $
4383.2 4329.5 4171.3 3579.8 3497.8 3350.4 115
[172.6 ] [170.5 ] [164.2 ] [140.9 ] [137.7 ] [131.9 ] [4.5 ]
2

15 $
+0.13
733.42
2311.6 -0
[91.0 ] +.005
[ 28.9 ]
-.000

A 6.4
[.3]
4 1555
[61.2 ]
1450.1
[57.1 ]
SECTION A-A
1335 FLYWHEEL DETAIL
4 [52.6 ]

1126.9 37
5 [44.4 ] K

1099.2
[43.3 ]
3 12

37 SEE DETAIL
VIEW 747.5
[29.4 ]
A

6
36
518.2
[20.4 ]
AA

5 R
200.9
[7.9 ]
7
22.7 0 CRANKSHAFT
[.9 ] [.0 ]
119.9
[4.7 ]
208.1 38
[8.2 ] 175.3
[6.9 ]
DETAIL PRECHAMBER
8 437
[17.2 ] 14 FUEL MANIFOLD
SCALE 0.150
589.7
[23.2 ]
16
603.2
[23.7 ]
899
9 [35.394 ]
2 38 G U 20 10 F 17 L Q N 15 35
REFERENCE NOTES:

1998.7 1. DIMENSION TAKEN FROM THE CUSTOMER CONNECTION

[78.7] BOLT SURFACE OF THE FLYWHEEL.

4318.7 4172.7 3559.1 3345.1 3167.5 2209.3 366.1 81.6 0 145 277.6 454
[170.0 ] [164.3 ] [140.1 ] [131.7 ] [124.7 ] [87.0 ] [14.4 ] [3.2 ] [.0 ] [5.7 ] [10.9 ] [17.9 ]
10 SEE NOTE 1

LEFT SIDE VIEW ECO 157101

REV NO 103
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS.
MACHINE DIMENSION TOLERANCE STANDARD -
SURFACE FINISH STANDARD -
DIMENSIONING AND TOLERANCING STANDARD - ASME Y14.5M, LATEST VERSION.
FABRICATION TOLERANCES -
MATERIAL: - REF. L-08092-7
11
HEAT TREATMENT:
NAME:
THIS PRINT IS PROVIDED ON A RESTRICTED BASIS NOT TO BE USED
INSTALLATION
IN ANY WAY DETRIMENTAL TO THE INTEREST OF WAUKESHA ENGINE DIVISION.
MODELS C.C.
DRAWING
12V275GL+

157101 07-14 ADDED PRECHAMBER FUEL MANIFOLD DETAIL. SEE SHEETS 1, 3- 5. FILE PART NO.
12 156928 04-14 SEE SHEET 3 FOR CHANGES L-08092-8
155229 01-13 RELEASED. SUPERSEDES L-08092-2
DR: MAO DATE: 01-14-13APP:
CHK: RHN DATE: 01-31-13APP:
CJN DATE:
DATE:
01-31-13
D SHT. 2 OF 5 SCALE: 0.100
 A B C D E F G H J K L M N P R S
L-08092-8 ITEM PART NO. REQ'D NAME
5
1

569
[22.4 ]
125
198 187 534.1
2 32 [4.9 ]
[7.8 ] [7.4 ] [21.0 ]
496.4
11 Y 11 39
[19.5 ] 30
W

2311.6 31
[91.0 ] A

3 2230.6 25
[87.8 ]

24 2

6
23 1838.2
[72.4 ] 6
4
0 7
S [.0 ]

7
DETAIL A 4
SCALE 0.200

DETAIL JACKET/AUX WATER 3

SCALE 0.150
5
12 1126.9
12 1099.2
[44.4 ]
[43.3 ]
SEE DETAIL A
L

37 A
6 747.5
[29.4 ] 698.7
0 1 532
[27.5 ]
[.0 ] [20.9 ]
AA
518.2 518.2
[20.402 ] 482.4 [20.4 ]
T [19.0 ]
26
27
28
7 L 200.9 29
154.5 [7.9 ]
[6.1 ]
22.7
22.7 0 CRANKSHAFT 0 [.9 ]
[.9 ] [.0 ] [.0 ]

17 17
175.3
[6.9 ] 208.5
8 [8.2 ]
5
14 38

480 480
19 603.2 [18.9 ] [18.9 ]
[23.7 ] 589.7
[23.2 ]

9 755.2
785
[29.7 ] 9
[30.9 ] 834.3
804 [32.8 ]
[31.7 ]

8 2
15 16 13 21 883.6
[34.8 ] 951.5 858.9 808.1 753.4 640 239.4 0 35 239.4 493.6 640 1035.3
[37.5 ] [33.8 ] [31.8 ] [29.7 ] [25.2 ] [9.4 ] [.0 ] [1.4 ] [9.4 ] [19.4 ] [25.2 ] [40.8 ]
10
1035.3 1013.2 894 869.9 399.7 198.7 0 115 282 768.7
22 0 35 271.3
[40.8 ] [39.9 ] [ 35.2 ] [34.3 ] [15.7 ] [7.8 ] [.0 ] [4.5 ] [11.1 ] [30.3 ]
[.0 ] [1.4 ] [10.7 ] FRONT VIEW ECO 157101
REAR VIEW REV NO 103
DETAIL PRELUBE PUMP UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS.
MACHINE DIMENSION TOLERANCE STANDARD -
SCALE 0.200 SURFACE FINISH STANDARD -
DIMENSIONING AND TOLERANCING STANDARD - ASME Y14.5M, LATEST VERSION.
FABRICATION TOLERANCES -
MATERIAL: - REF. L-08092-7
11
HEAT TREATMENT:
NAME:
THIS PRINT IS PROVIDED ON A RESTRICTED BASIS NOT TO BE USED
INSTALLATION
IN ANY WAY DETRIMENTAL TO THE INTEREST OF WAUKESHA ENGINE DIVISION.
MODELS C.C.
DRAWING
12V275GL+

157101 07-14 ADDED ENGINE ROTATION ON FLYWHEEL AND CONN. 37, 38 & 39 (FRONT VIEW). SEE SHEET 2 & 5. FILE PART NO.
12 156928 04-14 MOVED ELECTRICAL BOX LOCATION TO TOP OF BLOWER MOTOR L-08092-8
155229 01-13 RELEASED. SUPERSEDES L-08092-7.
DR: MAO DATE: 01-14-13APP:
CHK: RHN DATE: 01-31-13APP:
CJN DATE:
DATE:
01-31-13
D SHT. 3 OF 5 SCALE: 0.100
 A B C D E F G H J K L M N P R S
L-08092-8
1.44" 1.19"
.94" .94"
1 A
A
.06" A
A .06"
9.00" 6.00" 7.50"
10.00"

3.06" 2.44"
5.31" 4.57"
2 6.44" 5.66" 7.31"
4.25" 3.57" 5.00"

4X .75"
8X .75" A
4.75" BOLT CIRCLE
A
SECTION A-A
7.50" BOLT CIRCLE SECTION A-A
A
SECTION A-A 4X .75" A
3
8X .88"
8.50" BOLT CIRCLE
6.00" BOLT CIRCLE SECTION A-A
4" ANSI 150# FLAT - FACE FLANGE 2" ANSI 150# FLAT - FACE FLANGE
SCALE 0.250 SCALE 0.380
5" ANSI 150# RAISED - FACE FLANGE 3" ANSI 150# RAISED - FACE FLANGE
SCALE 0.250 SCALE 0.380

.88"

4 8X 21 [.8 ] EQUALLY SPACED .69"

298.5 [11.8] B.C. A .06"
L 22.5 $
343 11 5.00"
210
[13.5 ]
[8.3 ]
1077.2
[42.4 ]

2.56" 1.95" 2.88"

5
772
[30.4 ]
655
[25.8 ] W

39
4X .62" A
SECTION A-A
SEE 3.88" BOLT CIRCLE
6 DETAIL
VIEW
1.5" ANSI 150# RAISED - FACE FLANGE
SCALE 0.500
125
[4.9 ]
0
2281.5 [.0 ]
AC
[89.8]
7
X

Y 39

229
[9.0 ]

8 655
[25.8 ]
772
[30.4 ]

12X 11.5 [.5 ] EQUALLY SPACED

Ø280 [11.0] B.C.

15 $
9
1204.3 DETAIL AUXILIARY WATER
0 1998.7 11 3350.4 3591 4171.3
[47.4 ]
AIR BLEED CONNECTION
[.0 ] [78.7 ] [131.9 ] [141.4 ] [164.2 ] (TOP OF INTERCOOLER)
(CRANKCASE REAR) SCALE 0.150

TOP VIEW NOTE:

10
1. FLANGE DIMENSIONS AND TOLERANCES PER
ASME/ANSI B16.5 - LATEST REVISION.
ECO 157101
REV NO 103
UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS.
MACHINE DIMENSION TOLERANCE STANDARD -
SURFACE FINISH STANDARD -
DIMENSIONING AND TOLERANCING STANDARD - ASME Y14.5M, LATEST VERSION.
FABRICATION TOLERANCES -
MATERIAL: - REF. L-08092-7
11
HEAT TREATMENT:
NAME:
THIS PRINT IS PROVIDED ON A RESTRICTED BASIS NOT TO BE USED
INSTALLATION
IN ANY WAY DETRIMENTAL TO THE INTEREST OF WAUKESHA ENGINE DIVISION.
MODELS C.C.
DRAWING
12V275GL+

157101 07-14 ADDED DETAIL VIEW OF AUX. WATER AIR BLEED (R-8). SEE SHEETS 1- 3 & 5. FILE PART NO.
12 156928 04-14 SEE SHEET 3 FOR CHANGES L-08092-8
155229 01-13 RELEASED. SUPERSEDES L-08092-7.
DR: MAO DATE: 01-14-13APP:
CHK: RHN DATE: 01-31-13APP:
CJN DATE:
DATE:
01-31-13
D SHT. 4 OF 5 SCALE: 0.100
 A B C D E F G H J K L M N P R S
L-08092-8 ITEM PART NO. REQ'D NAME

19. FLYWHEEL - 12X 0.75-10 UNC-2B 1.57 [40] , EQUALLY SPACED AT 27.25 [692.15] B.C.
1 ENGINE CONNECTIONS
20. AUXILIARY WATER DRAIN - 1.00"-11.5 NPT
1. NATURAL GAS INLET - 2.00" ANSI 150# FLAT - FACE FLANGE
21. OIL PAN OR OIL HEATER CONNECTION - 1.50"-11.5 NPT
2. AUXILIARY WATER INLET - 4.00" ANSI 150# FLAT - FACE FLANGE
22. LUBE OIL DRAIN OR OIL HEATER CONNECTION - 1.50"-11.5 NPT
3. AUXILIARY WATER OUTLET - 4.00" ANSI 150# FLAT - FACE FLANGE
23. AUXILIARY WATER STATIC LINE - 1.50"-11.5 NPT
4. ENGINE WATER OUTLET - 5.00" ANSI 150# RAISED - FACE FLANGE
2 24. COMPRESSOR COOLING CONNECTION - 2"-11.5 NPT (SEE NOTE 4)
5. ENGINE WATER INLET - 5.00" ANSI 150# RAISED - FACE FLANGE
25. JACKET WATER STATIC LINE - 1.50"-11.5 NPT
6. EXHAUST OUTLET - 8" ANSI FLAT - FACED FLANGE
NOTE: EXHAUST SYSTEM MUST SUPPORT ITS OWN WEIGHT BEYOND THIS POINT. 26. LOCAL CONTROL, HARNESS CONNECTION

7. ENGINE AIR INLET - 229 [9.00] I.D. (CAN BE ROTATED) 27. CUSTOMER INTERFACE, HARNESS CONNECTION
NOTE: AIR INLET SYSTEM MUST SUPPORT ITS OWN WEIGHT BEYOND THIS POINT.
28. EXHAUST THERMOCOUPLES, HARNESS CONNECTION
8. LUBE OIL DRAIN - 1.50"-11.5 NPT
3
29. MAIN BEARING THERMOCOUPLES, HARNESS CONNECTION
9. PRELUBE PUMP MOUNTING FLANGE - 4X 12.00 [0.47] ON 5.88 B.C., EQUALLY SPACED
NOTE: MUST CONFORM TO MOTOR FRAME SIZE 182C AND "M" DRIVE CONFIG. 30. MAIN GAS PILOT VALVE INLET - 0.5"-14 NPT (80 PSI MAX.)

10. POWER DISTRIBUTION INTERFACE 31. MAIN GAS PILOT VALVE OUTLET - 0.5"-14 NPT (SEE NOTE 2)

11. JACKET WATER AIR BLEED CONNECTION - 0.50"-14 NPTF 32. MAIN GAS PILOT VALVE OUTLET - 0.25"-18 NPT (SEE NOTE 2)
( 6.35 [0.25] LINE TO JACKET WATER EXPANSION TANK)
33. STARTER PILOT VALVE OUTLET - 0.25"-18 NPT, WITH REMOVABLE MUFFLER
4 12. AUXILIARY WATER AIR BLEED CONNECTION - 0.50"-14 NPTF
( 6.35 [0.25] LINE TO AUXILIARY WATER EXPANSION TANK) 34. STARTER VALVE SOLENOID OUTLET - 0.25"-18 NPT, WITH REMOVABLE MUFFLER

13. LUBE OIL DRAIN - 1.00"-11.5 NPT, POST FILTER 35. JACKET WATER DRAIN/WATER HEATER INLET - G1-1/2"

14. STARTER MOTOR AIR/GAS INLET - 1.50" ANSI 150# RAISED - FACE FLANGE 36. JACKET WATER HEATER OUTLET - 1.25"-11.5 NPTF 4383.2
[172.6 ]
15. STARTER MOTOR AIR/GAS OUTLET - 3.00" ANSI 150# RAISED - FACE FLANGE 37. PRE CHAMBER GAS PRESSURE (GAS) - 0.25"-18 NPT JW OUTLET
16. LUBE OIL DRAIN - 1.00"-11.5 NPT, PRE-FILTER 38. INTAKE MANIFOLD PRESSURE (AIR) - 0.25"-18 NPT
5
4318.7
17. BREATHER CONNECTION - 101.6 [4.00] O.D. 39. AUXILIARY WATER AIR BLEED CONNECTION - 0.25"-18 NPT (TOP OF INTERCOOLER) [170.0 ]
(SEE DETAIL VIEW, SHEET 4) JW INLET
18. LIFTING EYES

6X M39 X 2 8X 37
6 [1.5 ]

215
[8.5]

1280 1140
8 [50.4] [44.9] ENGINE
FRONT

570
[22.4] NOTES:
1. ALL ENGINE PIPING FLANGES MUST BE CONNECTED FROM THIS POINT
TO THE FACILITY/CUSTOMER PIPING USING A FLEXIBLE CONNECTION.
9
2. VENT ALL VALVE EXHAUST PORTS TO A SAFE LOCATION IF COMBUSTIBLE
GAS IS USED FOR WORKING FLUID.

215 3. ALL EXHAUST CONNECTIONS ARE TO BE DONE PER S-08242 (LATEST VERSION).
[8.5]
4. REFERENCE 275GL/GL+ COOLING CIRCUIT SCHEMATIC FOR JACKET WATER CIRCUIT
AND AUXILIARY WATER CIRCUIT.
4329.5
10 0 240 700 1160 1620 2080 2540 3000 [170.5 ]
[.0 ] [9.4 ] [27.6 ] [45.7 ] [63.8 ] [81.9 ] [100.0 ] [118.1 ] AUX OUTLET
4172.7 ECO 157101
[164.3 ] REV NO 103
AUX INLET
33 34 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS.

BOTTOM VIEW MACHINE DIMENSION TOLERANCE STANDARD -

SURFACE FINISH STANDARD -
DIMENSIONING AND TOLERANCING STANDARD - ASME Y14.5M, LATEST VERSION.
FABRICATION TOLERANCES -
MATERIAL: - REF. L-08092-7
11
HEAT TREATMENT:
NAME:
THIS PRINT IS PROVIDED ON A RESTRICTED BASIS NOT TO BE USED
INSTALLATION
IN ANY WAY DETRIMENTAL TO THE INTEREST OF WAUKESHA ENGINE DIVISION.
MODELS C.C.
DRAWING
12V275GL+

157101 07-14 ADDED ENG. CONNS. 37, 38 & 39 ON CONN. LIST. SEE SHEETS 1-4. FILE PART NO.
12 156928 04-14 SEE SHEET 3 FOR CHANGES L-08092-8
155229 01-13 RELEASED. SUPERSEDES L-08092-7.
DR: MAO DATE: 01-14-13APP:
CHK: RHN DATE: 01-31-13APP:
CJN DATE:
DATE:
01-31-13
D SHT. 5 OF 5 SCALE: 0.100