Scribd Logo
Upload

Welcome to Scribd!

  • 281 views

    Interplater 85/125P HDX: Setting New Processing Standards For High-End Users

    Uploaded by

    hackko24
    This document summarizes the InterPlater 85/125P HDX plate processor from Glunz & Jensen. It is targeted at high-volume newspaper and commercial printers. Key features include a dual oven pre-heat system for high temperature uniformity, processing speeds up to 220 cm/min, and easy access electrical components. The processor is designed to meet requirements of major plate manufacturers and support high-quality imaging at productivity of over 300 plates per hour.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Interplater 85/125P HDX: Setting New Processing Standards For High-End Users

    Uploaded by

    hackko24
    281 views2 pages
    This document summarizes the InterPlater 85/125P HDX plate processor from Glunz & Jensen. It is targeted at high-volume newspaper and commercial printers. Key features include a dual oven pre-heat system for high temperature uniformity, processing speeds up to 220 cm/min, and easy access electrical components. The processor is designed to meet requirements of major plate manufacturers and support high-quality imaging at productivity of over 300 plates per hour.

    Original Description:

    Glunz and Jensen manual

    Original Title

    IP_HDX_85_125P (1)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the InterPlater 85/125P HDX plate processor from Glunz & Jensen. It is targeted at high-volume newspaper and commercial printers. Key features include a dual oven pre-heat system for high temperature uniformity, processing speeds up to 220 cm/min, and easy access electrical components. The processor is designed to meet requirements of major plate manufacturers and support high-quality imaging at productivity of over 300 plates per hour.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    281 views2 pages

    Interplater 85/125P HDX: Setting New Processing Standards For High-End Users

    Uploaded by

    hackko24
    This document summarizes the InterPlater 85/125P HDX plate processor from Glunz & Jensen. It is targeted at high-volume newspaper and commercial printers. Key features include a dual oven pre-heat system for high temperature uniformity, processing speeds up to 220 cm/min, and easy access electrical components. The processor is designed to meet requirements of major plate manufacturers and support high-quality imaging at productivity of over 300 plates per hour.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    InterPlater 85/125P HDX

    Setting new processing standards for high-end users


    InterPlater 85/125P HDX is our new plate processor generation including pre-heat and pre-wash – targeted
    directly at high-end, heavy-duty users such as newspapers with production up to 60,000 m2/year.

    The HDX generation introduces innovative features that enable even higher productivity for newspaper
    production at a consistent high quality. The increased productivity is consolidated by the unique dual high
    capacity pre-heat oven. The oven uses the ‘hot-air’ principle which is recognized for providing excellent
    temperature uniformity that enables use of stochastic raster at high resolution.

    The processor is designed to meet the specific requirements of polymer CtP plates from the major plate
    manufacturers to support both high-end newspaper and high-end commercial applications.

    InterPlater 85/125P HDX sets new processing standards in the market that perfectly match the high demands of
    quality and precision in the entire printing process.

    User-friendly control panel The world's best integrated pre-heating High processing speed and quality One drawer with all electrical parts
    Precise handling is the key to high productivity High-capacity pre-heat oven with 2 separate Redesign of the development section has improved All main electrical control boards and power
    and good results. The InterPlater HDX is easy modules for the InterPlater HDX pre-heat the performance of the processor as well as the supply have been conveniently collected in one
    to operate with its graphical touch screen and model. Uses the ’hot-air’ principle for providing development quality. With a productivity of +300 drawer under the processor. Safely stored away
    logical menu. Furthermore you can install the excellent temperature uniformty. Supports pph and a linear speed of 2.2 m/min the processor from liquids during normal operation, but pull
    imaging with FM-screening. matches the performance of the fastest setters. the drawer and you will have good visibility and
    native language (optional) and gain full control
    access to all electrical components.
    via Remote Enabling System (optional).
    Technical specifications
    InterPlater 85/125P HDX

    Materials Photopolymer plates and thermal plates requiring pre-heat


    Material width, max 850 mm (33.5") / 1250 mm (49.2")
    Material length, min 285 mm (11.2")
    *The 85 supports 276 mm (10.875”) with optional 44” web reduction kit
    Shown with
    Material thickness 0.15 - 0.4 mm (0.006 - 0.016") additional
    options
    Processing speed 85: 40-220 cm/minute ±5% (15.7-86.6"/minute ±5%)
    125: 40-180 cm/minute ±5% (15.7-70.9"/minute ±5%)
    Tank content, pre-wash 18 l (4.8 US gal) / 26 l (6.9 US gal)
    Tank content, developer 54 l (14.3 US gal) / 79 l (20.9 US gal)
    Tank content, wash 14 l (3.7 US gal) / 20.5 l (5.4 US gal)

    Tank content, gum 3.5 l (0.9 US gal) / 4.2 l (1.1 US gal)


    Adjustable temperature, developer 20-35°C ± 0.5°C (68-95° F± 0.9° F)
    *Glunz & Jensen recommends a cooling unit
    Adjustable temperature, dryer 30-55°C ± 0.5°C (86-131° F± 0.9° F)
    Area replenishment amount 0-250 ml/m2 ±5% (0-0.066 US gal/m2 ±5%)
    Water consumption Adjustable max. 10 l/min (2.6 US gal) (can be reduced by optional kit)
    Water consumption with optional kit @ 2000 ml/m2 plus daily replacement
    Area temperature, pre-heat 70 - 160° C (158 - 320° F)
    Power consumption, stand-by 0.5 kW / 0.5 kW
    Power consumption, operate 3.6 kW / 4.2 kW 230 / 400 V, 3-phase, 50-60 Hz
    Power consumption, max. 9 kW / 10.4 kW 230 / 400 V, 3-phase, 50-60 Hz
    Weight, crated 685 kg (1510 lbs) / 1000 kg (2205 lbs)
    Weight, uncrated 465 kg (1025 lbs) / 680 kg (1499 lbs)
    Dimensions, crated 5: L: 2152 mm (84.7"), W: 1552 mm (61.1"), H: 1500 mm (59.1")
    8
    125: L: 2152 mm (84.7"), W: 1952 mm (76.9"), H: 1500 mm (59.1")
    Approvals UL, c-UL and GOST-R certified. Complies with CE standards and RoHs directive

    Standard equipment: Dual hot air pre-heat oven, pre-wash section, dip tank with anti-oxidation lid, fully automatic replenishment system
    (m2), developer circulation and filtration (50 micron), minimum plate length 285 mm to support 46" web, wash section, integrated water
    saving for pre-wash and wash section, integrated water drain manifold, gum section with automatic cleaning, easy lift top cover, graphical
    finger touch control panel, remote enabling system (3 months trial period), installation kit, user manual on CD, ‘Golden Rules of Mainte-
    nance’, emergency stop, safety switch (GFCI)

    Optional accessories: Conductivity read-out, application specific brush configuration incl. software settings, closed stand, container level
    probes, cooling unit - standard or high capacity 50/60 Hz, delivery table, drip tray, exhaust manifold, feed table, extension of feed table,
    filter - 150 micron reusable, filter - re-useable 350 micron, hand shower for cleaning, interface flat front, on-line interface to most setters,
    operator panel – left, pump - quick fill 10-12 l/2.6-3.2 gal/min, remote enabling system (full), USB memory stick

    Standard configurations may vary in the market. Specifications are subject to changes without prior notice.
    Max.
    368/436.5 cm
    (144.9”/171.9”)

    267.5 cm 73.5/125 cm Max. 27/44 cm


    (105.32) (28.9”/49.2”) (10.6”/17.3”)

    133/173 cm
    116 - 131 cm (52.4”/68.1”)
    (45.7 - 51.6”)
    87.5 - 102.5 cm
    (34.4” - 40.4”)

    Headquarters: USA Operations:


    Glunz & Jensen A/S Glunz & Jensen, Inc.
    Print: HellasGrafisk A/S · PN 10025180C 10/08

    Haslevvej 13 21405 Business Court


    DK-4100 Ringsted Elkwood, VA 22718-1757
    Denmark USA
    Tel. +45 57 68 81 81 Tel. +1 540 825-7300
    Fax +45 57 68 83 40 Fax +1 540 825-7525
    E-mail: [email protected] E-mail: [email protected]
    Internet: www.glunz-jensen.com

    You might also like