Catalogo Motor Cummins Ntc400 Cpl393
Catalogo Motor Cummins Ntc400 Cpl393
Catalogo Motor Cummins Ntc400 Cpl393
*3055099 ______ 6
3055099 LINER, CYLINDER LPF STD ______ LINER PROTRUSION: .0045-.0075"
______ 3065405 LINER, CYL .020”/.040”
12 3032874 SEAL, O-RING ------------------------------------------------------------
USE APPROPRIATE SIZE SHIM, LINER 1. _______ / _______ 2. _______ / _______
6 215090 SEAL, CREVICE 3. _______ / _______ 4. _______ / _______
5. _______ / _______ 6. _______ / _______
______ CHECK LINER BORE FOR SIZE AND
OUT OF ROUND. ( SEE POSTED QUALITY
PLAN FOR SPECS)
______ CHECK OIL HOLE CLEAR (PASSES AIR)
BETWEEN CAM BUSHING AND HEAD DECK.
______ ESN THE SAME ON BLOCK, CHF, AND
DATA PLATE. (SEE PAGE 1 FOR PLATE INFO)
______ DR# ON THE CHF AND DATA PLATE
MATCH.
6 68445 DOWEL, HEAD TO BLOCK
*3603903 ______ 1 3652901 ENGINE DATAPLATE
4 S2286 RIVETS, DATA PLATE DRIVE
STATION #5
=====================================================================================
3603312 ______ 6 3095703 PISTON ENG 3-RING SINGLE NI_____ CHECK CRANK SIZE ( MIC ONE ROD
6 3013930 CON ROD(CAST # 218808) JOURNAL)
12 214950 BEARING, STD CON ROD ______ 2ND AND 3RD RINGS MUST HAVE THE
A/R214951 BEARING, .010” CON ROD WORD "TOP" FACING UP. (TOWARDS TOP
6 191970 PIN PISTON OF PISTON)
12 175755 RING, RETAINING SIDE CLEARANCE: ROD TORQUE:
*3803358 6 3064396 RING, TOP COMPRESSION .004-.040" 141-217 LB-FT
6 3064397 RING, 2ND COMPRESSION -----------------------------------------------------------------
A/R - AS REQUIRED DR9-RX
< PAGE 2 > PRINTED: 10/24/2019
6 3064398 RING, OIL CONTROL 1. ________ ______ / ______
2. ________ ______ / ______
3. ________ ______ / ______
4. ________ ______ / ______
5. ________ ______ / ______
6. ________ ______ / ______
STATION #6
=====================================================================================
CAM FOLLOWER GASKET REF: 3062352
*3036939 ______ 3 3081251-RX CAM FOLLOWER TIMING: 1. _______ 2. _______ 3. _______
18 S129 C/S HEX HEAD 3/8-24 X 1
17 S604 WASHER, LOCK 3/8”
6 68585 DOWEL
USE APPROPRIATE SIZE GASKET, CAM FOLLOWER
STATION #7
=====================================================================================
*AR9834-RX______ 1 AR9834-RX LUBE PUMP ASSY