Scribd
Upload
49 views1 page

Powerware 9135 HARDWARE INTRODUCTION and Troubleshooting: RA13 RA12

This document provides an introduction and troubleshooting information for the Powerware 9135 hardware. It describes the driver circuit of the battery SCR located on board A, including which components are used during the soft-start process and after soft-start to charge the bus capacitor from the battery and supply the input of the DC-DC converter. It also lists jump tests that can be used to test SCRA3 and SCRA5 by shorting connections JPA3 and JPA4.

Uploaded by

Asad Iqbal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
49 views1 page

Powerware 9135 HARDWARE INTRODUCTION and Troubleshooting: RA13 RA12

This document provides an introduction and troubleshooting information for the Powerware 9135 hardware. It describes the driver circuit of the battery SCR located on board A, including which components are used during the soft-start process and after soft-start to charge the bus capacitor from the battery and supply the input of the DC-DC converter. It also lists jump tests that can be used to test SCRA3 and SCRA5 by shorting connections JPA3 and JPA4.

Uploaded by

Asad Iqbal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Powerware 9135 HARDWARE INTRODUCTION

AND TROUBLESHOOTING
(2) Driver Circuit of Battery SCR
Located at A board

RA12 RA13

SCRA3 G G
DA8

RA18 DA10 DA11


V3 UA3
1 6
JPA3 1 2 4 RA16
2 RA17
Bon1'
RA19 1 6
V3
2 4
JPA4 12 Bs' UA4

(a) During the soft-start process of cold start, Bs’ will be low to turn on SCRA5. The
Bus capacitor will be charged by battery through RA12 and RA13.
(b) After soft-start, Bs’ will be high to turn off SCRA5 and Bon1’ will be low to turn
on SCRA3. Then the input of DC-DC converter will be supplied by battery
through SCRA3.
(c) Test JUMP:
JPA3: SCRA3 will be off no matter what Bon1’ is if JPA3 is shorted
JPA4: SCRA5 will be off no matter what Bs’ is if JPA4 is shorted

10

You might also like