ATJ 46

SELF-PROPELLED ARTICULATING BOOM - DIESEL

 PERFORMANCE
POWER PRECISION ERGONOMICS SERVICEABILITY

MAXIMUM PLATFORM HEIGHT PLATFORM MAXIMUM CAPACITY

45’11” [14.01 m] 500 lbs. [227kg]

EXCELLENT HORIZONTAL OUTREACH

27'3” [8.3 m]

FOUR (4) SIMULTANEOUS MOVEMENTS

Increase productivity with the ability to
perform quick movements. Takes
approximately 40 seconds to reach 46 ft.

CONSTANT ROTATION CONTROL

355°
TURRET ROTATION
Platform rotation speed varies according
to how far the boom is extended.

SMOOTH PLATFORM OPERATION

All hydraulic movements are proportionate
allowing for smooth operation and precise
adjustments in tight areas.

STOP AND GO FEATURE

The MANITOU “Stop and Go” system allows the engine
to be running only when the machine is acutally working
lowering fuel consumption, less wear and tear, better
resale value, and lower Total Cost of Ownership (TCO).

OSCILLATING FRONT
AXLE IS STANDARD
The heavy-duty oscillating
front axle provides improved
traction to the front wheels
14" [360mm]
for more driving power on DESIGNED FOR ROUGH TERRAIN
all-terrain or slippery surfaces. High Ground Clearance of 14” (mm)
2 with 4-Wheel-Drive 45% Gradeability
 ATJ 46

EASY AND INTUITIVE

CONTROL PANEL DESIGN
Ergonomic platform control panel comes
standard with a protective cover to
keep out water and jobsite material.

SELF-DIAGNOSTIC AT
GROUND CONTROL PANEL
The self-diagnostic system is fully
integrated for fast detection of fault
codes, saving time during maintenance
as well as machine configuration. The
ground panel control on-screen display
constantly shows information on; fuel, hour
meter, battery voltage, and more.

SAFE MAN SYSTEM (OPTIONAL)

The Safe-Man System will automatically shut off the unit if it
detects operator movement into the control panel.

GALVANIZED PLATFORM
The fully galvanized 6’11 x 2’7” (2.1 x 0.80m) platform
is designed to adapt for extreme conditions and better
COMPACT RETRACTED DIMENSIONS rust resistance. The platform floor is removable, and easy
14’9” x 7’7” x 9’3” (4.49 m x 2.32 m x 2.83 m) to replace if needed versus replacing the entire platform.
Easy to transport when retracted. The overall
length of the machine will decrease to under
SWING GATE PLATFORM ENTRANCE
The swing gate makes for easy and quick operator
15 ft with a light weight of 13,342 lbs. (6052 kg).
entrances to and from the platform.

TOOL TRAY COMPARTMENT

A large tray is located under the platform control
box to hold tools and other jobsite accessories.

MAINTENANCE MADE EASY

All maintenance components are located in one place
for easy accessibility. Hoses have been properly routed
to avoid interference, reducing turnaround times.

CONNECTED MACHINE
Manage unit location, maintenance cycles, service warnings
and more with the EasyMANAGER telematics feature.

NO DEF REQUIRED
3
 ATJ 46 SPECIFICATIONS & DIAGRAMS STANDARD FEATURES

Platform Height (m) 45’11” (14.01 m) • Stop and Go • Proportional Controls

• 4 Simultaneous Movements • Control Panel Protective Cover
Horizontal Outreach (m) 27’3” (8.30 m)
• 4 Wheel Drive • Rotating Beacon Light
Up and Over Height (m) 24’7” (7.50 m) • Audible Alarm and Illuminated • Easy Manager
CAPACITIES

Vertical Jib Rotation + 65° / -59.5 ° Lamp (leveling, overload, lowering) • Jib
• Front Oscillating Axle • Water Heater
Platform Capacity (kg) 500 lbs. (227 kg)
• Lift and Drive • Tools Storage in Platform
Turret Rotation 355° non-continuous • Steer and Rotate • Galvanized Platform with
Platform Rotation (right/left) 90 ° / 90 ° • Emergency Electric Pump Mesh Floor
2 • Swinging Gate on Platform • Tie-Down and Lifting Rings
Number of People (inside/outside)
• CAN Bus Technology • Lockable Fuel and Oil Caps
Machine Weight (kg) 13,342 lbs.* (6052 kg*) • Operating Pedal • 110V Plug with Differential
Platform Dimensions L x W (m) 6’11” x 2’7” (2.1 x 0.8 m) • Differential Lock on Rear Axle Circuit-Breaker
A - Overall Width (m) 7’7” (2.32 m) • Emergency Stop Button in
OPTIONAL FEATURES
Platform and Frame
WEIGHT / DIMENSIONS / PERFORMANCE

B - Overall Length (m) 21’5” (6.68 m) • Cold Weather Kit

• Front Axle with Limited Slip
C - Overall Length - retracted (m) 14’9” (4.49 m) • Fuel Gauge w/ Low Level Indicator • SMS: Safe Man System
• Horn in the Platform • Work Light on Platform
D - Overall Height - retracted (m) 9’3” (2.83 m)
• Self-Diagnostic System • Drive Safety Orientation System
E - Overall Height (m) 7’9” (2.37 m) • Generator 3.0 kW or 5.0 kW
• Cut-Off Battery
F - Floor Height (access) (m) 1’6” (0.45 m) • Constant Rotation Control
G - Turning Radius - inside (m) 7’6” (2.29 m)
9’10"6 ’7"3 ’3”0 3’3” 6’7" 9’10"1 3'1" 16'5"1 9'8"2 3' 26'3"2 9'6" 32'10"
H - Turning Radius - outside (m) 17’ (5.17 m) 33 21 0 1 2 45 67 89 10
17 55'9"
I - Ground Clearance (m) 1’2” (0.36 m) 16 52'6"

J - Wheelbase 7’2” (2.20 m) 15 49'3"

9” (0.22 m) 14 45'11"
Tailswing (m)
13 42'8"
Travel Speed (km/h) 3.11 mph (5 km/h)
12 39'4"
Working Speed (km/h) 0.62 mph (1 km/h)
11 36'1"
Gradeability 45% 10 32'10"

Type of Tires Rough-terrain foam filled 9 29'6"

TIRES

8 26'3"
Dimensions (0 x W) 2’9” x 11” (0.84 x 0.29 m)
7 23'
Drive / Steering / Brake wheels 4 / 2 / Rear
6 19'8"
Manufacturer Kubota 5 16'5"
ENGINE

Model D1105-E4B 4 13'1"

3 9’10"
Power (kW) 24.1 hp (18.5)
2 6’7"
139 psi (9.6)
MISCELLANEOUS

Ground Pressure (dan/cm2)

1 3’3”
Maximum Hydraulic Pressure (bar) 4931 psi (340) 33 28 2 9 10 m
9’10"6 ’7"3 ’3”0 3’3” 6’7" 9’10"1 3'1" 16'5"1 9'8"2 3' 26'3"2 9'6" 32'10" ft/in
Hydraulic Tank Capacity (L) 14.27 US gal (54 L) H
Fuel Tank Capacity (L) 14 US gal (52.9 L)
Sound Level on Ground 105 db
G C

E D

*Changes according to options and standard F

of the country where the machine will be delivered. I J

A B

This publication in no way constitutes an offer and the company

reserves the right to alter specifications without notice.
MANITOU NORTH AMERICA, LLC • PO Box 179 • West Bend, WI 53095 ©2019 Manitou North America, LLC. Manitou. All rights reserved.
Tel: 262-334-9461 • Fax: 262-338-7517 • www.manitou.com ATJ 46 _4pg_06/19