0% found this document useful (0 votes)
230 views3 pages

Wind Load Reaction Force Due To Wind Action From Stack Acting On The Fan Deck

The document provides information to calculate the wind load reaction force on a fan deck structure that is part of a building. Key details include the building and structure dimensions, wind speed parameters, and equations used to calculate the peak wind velocity, turbulence intensity, characteristic peak velocity pressure, and finally the wind force on the cylindrical structure. The calculated wind force is 5.235907 kN and induces a tension or compression force of 255.4861 kN on the base of the fan deck structure.

Uploaded by

ikanyu79
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
230 views3 pages

Wind Load Reaction Force Due To Wind Action From Stack Acting On The Fan Deck

The document provides information to calculate the wind load reaction force on a fan deck structure that is part of a building. Key details include the building and structure dimensions, wind speed parameters, and equations used to calculate the peak wind velocity, turbulence intensity, characteristic peak velocity pressure, and finally the wind force on the cylindrical structure. The calculated wind force is 5.235907 kN and induces a tension or compression force of 255.4861 kN on the base of the fan deck structure.

Uploaded by

ikanyu79
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Wind Load

Reaction Force due to wind action from stack acting on the fan deck

Building information Ref


Bulding height H= 8.8 m
Cylinder Diameter b= 0.4 m
Cylinder Height l= 19.518 m
Heifht of the structure z= 28.318 m
Fundamental value of the basic wind velocity vb,0 = 20 m/s

Wind Load Factor


Direction factor cdir = 1
Season factor cseason = 1

Terrain category
z0 = 0.05 Table NA.1
zmin = 2
3
Air Density ρ= 1.194 kg/m NA.2.18

Wind Load Calculation


Basic wind velocity vb = 20 m/s eq (4.1)
2
Basic velocity pressure qb = 0.2388 kN/m eq(4.10)
At Height of z
Peak Pressure
Terrain factor kr = 0.19 (z0/0.05)0.07 eq(4.5)
= 0.19
cr = krIn(z/z0)
= 1.204454
co = 1
mean velocity at a heigh z vm = cr.co.vb
= 24.08907
Characteristic peak velocity pressure, qp
Turbulence factor kI = 1 NA.2.16
Standard deviation σv = kr.vb.kl eq(4.6)
= 3.8
Turbulence intensity at height z lv(z) = σv/(vm(z)) eq(4.7)
= 0.157748
Characteristic peak velocity pressure, qp qp = [1+7.lv].1/2.ρ.vm2(z) eq(4.8)
2
= 0.728969 kN/m
Wind Load Coefficient
2
Kinematic viscosity of the air ν= 1.50E-05 m /s

Peak wind vlocity at ze v(ze) = 34.94357


Reynolds number Re = b.v(ze)/ν
= 9.32E+05

Equivalent surface roughness k k= 0.2


ratio k/b = 0.0005
Force coefficient of cylinders without free-end flow cf,0 = 0.54 figure 7.28
Reference area for the sylindrical structures Aref = b.l
2
= 7.8072 m
λ = min (2l/b , 70)
= 70
Solidity ration φ= 1
End-Effect factor ψλ = 0.92

Wind force on the structure Fw = 5.235907 kN

Force on the base


Tension Force Ft = 255.4861 kN
Compression Fc = 255.4861 kN

You might also like