parts catalog

HTH616 C Harvester Head

PC10314 29NOV10 (English)

COPYRIGHT® 2010 WARATAH NZ LIMITED

Tokoroa, New Zealand All Rights Reserved
LITHO IN NEW ZEALAND
 10-1
WARATAH HTH616C HARVESTER

INTRODUCTION AND CUSTOMER INFORMATION

TX1056757 -UN-23APR09

LEFT SIDE VIEW OF WARATAH HTH616C HARVESTER

(SERIAL NO. WA616CX000005- )

TO THE CUSTOMER
THE PART NUMBERS IN THIS CATALOG WERE CORRECT AT THE TIME OF PUBLICATION.
IT IS OUR POLICY TO CONSTANTLY IMPROVE OUR EQUIPMENT AND THEREFORE PART NUMBERS MAY CHANGE.
WHEN ORDERING PARTS VERIFY PART NUMBERS THROUGH YOUR DEALER.

(SPECIFICATIONS AND DESIGN SUBJECT TO CHANGE WITHOUT NOTICE)

WARATAH HTH616C HARVESTER PC10314 (23-JUL-09) 10-1

PN=1
 10-2
WARATAH HTH616C HARVESTER

HOW TO USE
INTRODUCTION
THIS PARTS CATALOG DETAILS ALL THE PARTS AVAILABLE FOR THE REPLACEMENT OF WORN OR SERVICEABLE
ITEMS ON THE HARVESTER HEAD. FOLLOWING INFORMATION WILL ASSIST YOU IN UNDERSTANDING THE LAYOUT
AND DETAIL OF THIS MANUAL. TAKE TIME TO READ AND UNDERSTAND THE CONTENT, IT WILL SAVE YOU TIME
WHEN LOOKING FOR PARTS
THIS PARTS CATALOG IS BROKEN DOWN INTO THE FOLLOWING SECTIONS.
GENERAL INFORMATION
MECHANICAL
CYLINDERS
SAW
ELECTRICAL
FIND END
HYDRAULICS
TOOLS
DECALS
NUMERICAL INDEX
WHERE POSSIBLE, THE LAYOUT OF EACH SECTON IS REFLECTED FROM TOP TO BOTTOM OF THE HEAD. E.G. THE
MECHANICAL SECTION STARTS WITH THE TILT UNIT, WITH THE FIRST ITEM DIPLAYED BEING THE LINK, WHICH
SITS AT THE TOP OF THE TILT UNIT. THE SECOND ITEM DISPLAYED IS THE ROTATOR, ETC.

GRAYED-OUT ILLUSTRATIONS (PHANTOMS)

SOME PAGES CONTAIN ILLUSTRATIONS WITH GRAYED-OUT PARTS.THESE ITEMS ARE FOR REFERENCE ONLY AND DO
DO NOT HAVE ASSOCIATED PART NUMBERS DISPLAYED. PART NUMBERS FOR THESE ITEMS CAN BE FOUND ON
OTHER PAGES IN THE RELEVANT SECTION FOR THAT PART.

DASH SIZE
DASH SIZE IS THE STANDARD USED TO REFER TO INSIDE DIAMETER OF A HOSE. THIS INDICATES THE SIZE BY
A TWO DIGIT NUMBER WHICH REPRESENTS THE RELATIVE ID IN SIXTEENTH OF AN INCH.

SERIAL NUMBER LISTING INFORMATION

SERIAL NUMBER INFORMATION IS LISTED TO SHOW ON WHICH MACHINES EACH PART CAN BE USED; FOR
EXAMPLE:
- THE PART CAN BE USED ON ALL MACHINES.
000000 - THE PART CAN BE USED ON MACHINES BEGINNING WITH THE SERIAL NUMBER LISTED.
- 000000 THE PART CAN BE USED ON MACHINES UP TO AND INCLUDING THE SERIAL NUMBER LISTED.
000000 - 000000 THE PART CAN BE USED ON MACHINES BETWEEN AND INCLUDING THE SERIAL NUMBERS
LISTED.
WHEN XXXXXX’S ARE LISTED IN PLACE OF A SERIAL NUMBER, A SERIAL NUMBER CHANGE WAS MADE, BUT
THE EXACT SERIAL NUMBER WAS NOT AVAILABLE WHEN THE CATALOG WAS PRODUCED.

BOX-ENCLOSED ILLUSTRATIONS
A KEY NUMBER, SHOWN IN THE PARTS LIST, IS ASSIGNED TO A BOX ENCLOSING ALL PARTS SOLD AS A
SERVICE ASSEMBLY.

COMPLETE GOODS LISTINGS

COMPLETE GOODS ARE LISTED IN BOLD FACE TYPE. ORDER SEPARATELY. DO NOT INCLUDE ON
REPLACEMENT PARTS ORDER.

10-2 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)

PN=2
 10-3
WARATAH HTH616C HARVESTER

SECTION INDEX
GENERAL INFORMATION ....................................................................................................................................................................10

MECHANICAL ........................................................................................................................................................................................20

CYLINDERS ...........................................................................................................................................................................................30

SAW .......................................................................................................................................................................................................40

ELECTRICAL .........................................................................................................................................................................................50

FIND END...............................................................................................................................................................................................60

HYDRAULICS ........................................................................................................................................................................................70

TOOLS ...................................................................................................................................................................................................80

DECALS .................................................................................................................................................................................................90

NUMERICAL INDEX ............................................................................................................................................................................100

WARATAH HTH616C HARVESTER PC10314 (23-JUL-09) 10-3

PN=3
 10-4
WARATAH HTH616C HARVESTER
ALPHABETICAL INDEX
PAGE PAGE
A BRACKET, HEAD MODULE BOX
(TIMBERMATIC T10 CONTROLLER)..................................... 50-4
ACCUMULATOR, VALVE ASSEMBLY W/O TOP SAW................70-2 BRACKET, HEAD MODULE BOX
ACCUMULATOR, VALVE ASSEMBLY W/TOPSAW.....................70-4 (TIMBERMATIC T10 CONTROLLER)..................................... 50-8
ACTUATOR, PVG 100 L.H. FEED MOTOR BRACKET, HEAD MODULE BOX
VALVE SECTION ...................................................................70-26 (TIMBERRITE CONTROLLER)............................................... 50-2
ACTUATOR, PVG 100 MAIN SAW BRACKET, HEAD MODULE BOX
VALVE SECTION ...................................................................70-28 (TR100 CONTROLLER).......................................................... 50-6
ACTUATOR, PVG 100 NON-TOP SAW MANIFOLD BRACKET, MAIN FRAME GUARDS.......................................... 20-24
( -00037).................................................................................70-34 BRACKET, SAW UNIT-3/4" SAW............................................... 40-26
ACTUATOR, PVG 100 NON-TOP SAW MANIFOLD BRACKET, TOP SAW ASSEMBLY .............................................. 40-4
(00038- ).................................................................................70-36 BRACKET, TOP SAW PROXIMITY SWITCH ............................ 50-12
ACTUATOR, PVG 100 R.H. FEED MOTOR BRACKET, VALVE MOUNTING (TOPSAW) ................................ 70-4
VALVE SECTION ...................................................................70-24 BRACKET, VALVE MOUNTING (W/O TOPSAW) ........................ 70-2
ACTUATOR, PVG 100 TOP SAW MANIFOLD ...........................70-30 BUSHING, (310 STANDARD LINK) ............................................. 20-6
ACTUATOR, PVG 100 TOP SAW MANIFOLD ...........................70-32 BUSHING, MEASURING UNIT.................................................. 20-36
ACTUATOR, PVG 32 FEED ARM BUSHING, ROTATOR LINK (LIGHT DUTY) ................................ 20-8
VALVE SECTION ...................................................................70-14
ACTUATOR, PVG 32 TILT VALVE SECTION.............................70-16
ACTUATOR, PVG 32 UPPER DELIMB C
VALVE SECTION ...................................................................70-12
ADAPTER, MAIN SAW UNIT ASSEMBLY .................................40-28 CABLE SPECIFICATIONS, ELECTRICAL................................. 50-44
ADJUSTER KIT, 3/4" SAW UNIT ................................................40-30 CABLE SPECIFICATIONS, ELECTRICAL
ADJUSTER, (CONTINUED)....................................................................... 50-45
SUPER CUT 100 SAW ASSEMBLY(BAR HOLDER).............40-18 CABLE SPECIFICATIONS, ELECTRICAL
ADJUSTER, SUPER CUT 100 SAW ASSEMBLY ......................40-12 (TIMBERRITE) ...................................................................... 50-34
ADJUSTER, TOP SAW ASSEMBLY.............................................40-4 CABLE SPECIFICATIONS, ELECTRICAL
ADJUSTER, 3/4" SAW UNIT ......................................................40-30 (TIMBERRITE)(CONT).......................................................... 50-35
ANGLED FEED UNIT FEED ARM MOTORS .............................20-48 CABLE, CUT CONTROL, SUPER CUT 100.............................. 50-22
ARM, DELIMBER UNIT ..............................................................20-30 CABLE, HEAD MODULE
ARM, LOWER DELIMB, BUSHES..............................................20-54 (TIMBERRITE CONTROLLER)............................................... 50-2
ARM, LOWER DELIMBER .........................................................20-52 CAP, FILLER, MAIN FRAME ..................................................... 20-22
ARM, SAW, MAIN SAW UNIT ASSEMBLY.................................40-28 CASE DRAIN BLOCK ................................................................ 70-40
ARMS, DELIMB CASE DRAIN HOSES................................................................ 70-56
(CUT TO LENGTH) ................................................................20-34 CATCH, CHAIN, SUPER CUT 100 SAW SPROCKET
ARMS, DELIMB, STANDARD.....................................................20-32 AND MOTOR SEALS ............................................................ 40-20
ARMS, FEED ..............................................................................20-44 CHAIN CATCH, SUPER CUT 100 SAW SPROCKET
ARMS, FEED UNIT.....................................................................20-42 AND MOTOR SEALS ............................................................ 40-20
ASSEMBLY FIXTURE, MAIN FRAME GUARDS........................20-24 CHECK VALVE KEY, SPECIAL SERVICE TOOLS...................... 80-8
ASSEMBLY, TOP SAW .................................................................40-4 CIRCUIT BOX - TR100 CONTROLLER .................................... 50-10
CLAMP, COVER ........................................................................ 20-26
CLAMP, DIAMETER MEASURING
B (TIMBERMATIC T10) ............................................................ 50-20
CLAMP, DIAMETER MEASURING
BACK-UP RING, TOP SAW HYDRAULIC MOTOR......................40-8 TIMBERRITE (SN -000017) .................................................. 50-16
BALL BEARING, MEASURING UNIT .........................................20-36 CLAMP, DIAMETER MEASURING - TIMBERRITE
BAR HOLDER, SUPER CUT 100 SAW ASSEMBLY..................40-18 (SN 000018- ) & TR100......................................................... 50-18
BAR, SAW UNIT-3/4" SAW.........................................................40-26 CLAMP, MEASURING ARM OPTION........................................ 50-14
BAR, SUPER CUT 100 SAW ASSEMBLY..................................40-12 CLAMP, 3/4" SAW UNIT............................................................. 40-30
BAR, SUPER CUT 100 SAW UNIT ............................................40-10 COMPONENTS, MAIN SAW ASSEMBLY - SUPERCUT
BAR, TOP SAW ............................................................................40-2 100......................................................................................... 40-14
BARREL, FEED OUT - SUPERCUT 100 ...................................40-14 CONNECTOR A, ELECTRICAL
BEARING, MAIN SAW UNIT ASSEMBLY ..................................40-28 (TIMBERMATIC T10) ............................................................ 50-36
BEARING, TOP SAW ASSEMBLY ...............................................40-4 CONNECTOR A, ELECTRICAL
BLOCK, CASE DRAIN................................................................70-40 (TIMBERRITE) ...................................................................... 50-26
BOX MOUNTING, HEAD MODULE CONNECTOR B, ELECTRICAL
(TIMBERMATIC T10 CONTROLLER)......................................50-4 (TIMBERMATIC T10) ............................................................ 50-38
BOX MOUNTING, HEAD MODULE CONNECTOR B, ELECTRICAL
(TR100 CONTROLLER)...........................................................50-6 (TIMBERRITE) ...................................................................... 50-28
BOX, HEAD MODULE CONNECTOR C, ELECTRICAL
(TIMBERMATIC T10 CONTROLLER)......................................50-8 (TIMBERMATIC T10) ............................................................ 50-40
BOX, HEAD MODULE CONNECTOR C, ELECTRICAL
(TIMBERRITE CONTROLLER)................................................50-2 (TIMBERRITE) ...................................................................... 50-30
BOX, RELAY - TR100 CONTROLLER .......................................50-10 CONNECTOR D, ELECTRICAL
BOX, TOOL...................................................................................80-4 (TIMBERMATIC T10) ............................................................ 50-42
BOX, TOOL (0.404 SAW) .............................................................80-2 CONNECTOR D, ELECTRICAL
(TIMBERRITE) ...................................................................... 50-32

10-4 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)

PN=4
 10-5
WARATAH HTH616C HARVESTER
ALPHABETICAL INDEX - CONTINUED
PAGE PAGE
CONNECTOR, HEAD MODULE BOX ELECTRICAL CONNECTOR A
(TIMBERMATIC T10 CONTROLLER)......................................50-8 (TIMBERRITE) ...................................................................... 50-26
CONNECTOR, HEAD MODULE BOX ELECTRICAL CONNECTOR B
(TIMBERRITE CONTROLLER)................................................50-2 (TIMBERMATIC T10) ............................................................ 50-38
CONNECTORS, ELECTRICAL (TR100) ....................................50-48 ELECTRICAL CONNECTOR B
CONTROL VALVE, SAW ASSEMBLY ........................................40-12 (TIMBERRITE) ...................................................................... 50-28
CONTROL, CUT, SUPER CUT 100............................................50-22 ELECTRICAL CONNECTOR C
COUPLING, MEASURING ARM OPTION..................................50-14 (TIMBERMATIC T10) ............................................................ 50-40
COVER .......................................................................................20-26 ELECTRICAL CONNECTOR C
COVER, FIND END ......................................................................60-2 (TIMBERRITE) ...................................................................... 50-30
COVER, MAIN FRAME...............................................................20-22 ELECTRICAL CONNECTOR D
COVER, TOP SAW PROXIMITY SWITCH .................................50-12 (TIMBERMATIC T10) ............................................................ 50-42
COVERS, MAIN FRAME GUARDS ............................................20-24 ELECTRICAL CONNECTOR D
CUTTING EDGE, DELIMB ARMS (TIMBERRITE) ...................................................................... 50-32
(CUT TO LENGTH) ................................................................20-34 ELECTRICAL HARNESS (TR100) ............................................ 50-46
CUTTING EDGE, FIXED TOP KNIFE ........................................20-28 ELECTRICAL HOSES AND FITTINGS
CUTTING EDGE, LOWER DELIMBER ARM .............................20-52 (TIMBERMATIC T10) ............................................................ 50-52
CUTTING EDGE, STANDARD DELIMB ARMS..........................20-32 ELECTRICAL HOSES AND FITTINGS
CYLINDER, FEED ARM ...............................................................30-8 (TIMBERMATIC T10) ............................................................ 50-54
CYLINDER, LOWER DELIMB ....................................................30-12 ELECTRICAL HOSES AND FITTINGS
CYLINDER, MAIN 3/4 SAW........................................................30-14 (TIMBERRITE) ...................................................................... 50-50
CYLINDER, MEASURING ............................................................30-6 ELECTRICAL SLEEVING
CYLINDER, TILT FRAME ...........................................................30-10 (TIMBERMATIC T10) ............................................................ 50-52
CYLINDER, TOP SAW .................................................................30-2 ELECTRICAL SLEEVING
CYLINDER, UPPER DELIMB .......................................................30-4 (TIMBERMATIC T10) ............................................................ 50-54
ELECTRICAL SLEEVING
(TIMBERRITE) ...................................................................... 50-50
D ENCODER, MEASURING ARM OPTION.................................. 50-14
END CAP, PVG 100 NON-TOP SAW MANIFOLD
DANGER LABEL, HARVESTER CAB DECALS...........................90-4 ( -00037) ................................................................................ 70-34
DANGER LABEL, HARVESTER HEAD DECALS ........................90-2 END CAP, PVG 100 NON-TOP SAW MANIFOLD
DECAL, COVER .........................................................................20-26 (00038- ) ................................................................................ 70-36
DECAL, MAIN FRAME ...............................................................20-22 EXTRACTION TOOL, SPECIAL SERVICE TOOLS .................... 80-8
DECALS, HARVESTER CAB .......................................................90-4
DECALS, HARVESTER HEAD.....................................................90-2
DELIMB ARMS F
(CUT TO LENGTH) ................................................................20-34
DELIMB CYLINDER, UPPER .......................................................30-4 FEED ARM CYLINDER ............................................................... 30-8
DELIMBER UNIT ........................................................................20-30 FEED ARM HOSES ................................................................... 70-50
DIAGNOSTIC COUPLING, ROTATOR MANIFOLD ...................70-38 FEED ARMS .............................................................................. 20-44
DIAMETER MEASURING (TIMBERMATIC T10)........................50-20 FEED MOTOR HOSES.............................................................. 70-54
DIAMETER MEASURING - TIMBERRITE FEED OUT BARREL - SUPERCUT 100.................................... 40-14
(SN -000017)..........................................................................50-16 FEED UNIT ARMS..................................................................... 20-42
DIAMETER MEASURING - TIMBERRITE FEED UNIT, FIXED .................................................................... 20-40
(SN 000018- ) & TR100..........................................................50-18 FEED WHEEL OPTIONS........................................................... 20-50
DRAIN HOSES, CASE ...............................................................70-56 FILE.............................................................................................. 80-4
DRIVE SHAFT, MEASURING UNIT ...........................................20-36 FILLER CAP, MAIN FRAME ...................................................... 20-22
FIND END .................................................................................... 60-2
FITTINGS, ANGLED FEED UNIT
E FEED ARM MOTORS ........................................................... 20-48
FITTINGS, HYDRAULIC ............................................................ 70-20
EDGE, CUTTING, DELIMB ARMS FITTINGS, HYDRAULIC ............................................................ 70-22
(CUT TO LENGTH) ................................................................20-34 FITTINGS, MAIN VALVE............................................................ 70-20
EDGE, CUTTING, KNIFE ...........................................................20-28 FITTINGS, STRAIGHT FEED ARM MOTORS .......................... 20-46
EDGE, CUTTING, LOWER DELIMBER ARM ............................20-52 FIXED FEED UNIT..................................................................... 20-40
EDGE, CUTTING, STANDARD DELIMB ARMS.........................20-32 FIXED FEED UNIT MOTOR ...................................................... 20-40
ELECTRICAL CABLE SPECIFICATIONS ..................................50-44 FIXED TOP KNIFE..................................................................... 20-28
ELECTRICAL CABLE SPECIFICATIONS FRAME (INDEXATOR................................................................ 20-18
(CONTINUED)........................................................................50-45 FRAME (INDEXATOR), TILT ..................................................... 20-18
ELECTRICAL CABLE SPECIFICATIONS FRAME (310) ............................................................................. 20-16
(TIMBERRITE) .......................................................................50-34 FRAME, MAIN............................................................................ 20-22
ELECTRICAL CABLE SPECIFICATIONS FRAME, TILT (310) .................................................................... 20-16
(TIMBERRITE)(CONT)...........................................................50-35 FRAME, TILT INDEXATOR.......................................................... 20-4
ELECTRICAL CONNECTOR (TR100)........................................50-48 FRAME, TILT UNIT ...................................................................... 20-2
ELECTRICAL CONNECTOR A
(TIMBERMATIC T10) .............................................................50-36

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 10-5

PN=5
 10-6
WARATAH HTH616C HARVESTER
ALPHABETICAL INDEX - CONTINUED
PAGE PAGE
G HOSES, MEASURING............................................................... 70-52
HOSES, SUPER CUT 100 OILER ............................................. 70-68
GASKET, OIL PUMP, -SAW UNIT-3/4" SAW ..............................40-34 HOSES, SWIVEL ....................................................................... 70-64
GASKET, SUPER CUT 100 LUBRICATION MANIFO HOSES, TILT CYLINDER .......................................................... 70-44
LD NON TOP SAW ................................................................40-22 HOSES, TOP SAW .................................................................... 70-62
GASKET, SUPER CUT 100 LUBRICATION MANIFO HOSES, UPPER DELIMB CYLINDER....................................... 70-46
LD WITH TOPPING SAW ......................................................40-24 HOSES, 3/4" MAIN SAW OILER - NON TOP SAW ................... 70-70
GASKET, SUPER CUT 100 LUBRICATION PUMP....................40-16 HOSES, 3/4" MAIN SAW OILER - TOP SAW ............................ 70-66
GAUGE, HYDRAULIC TEST (0.404 SAW)...................................80-2 HOUSING, OIL PUMP, SAW UNIT-3/4" SAW ............................ 40-34
GEAR, RING, ROTATOR (310 STANDARD) ..............................20-10 HOUSING, PVG 100 L.H. FEED MOTOR
GEAR, RING, ROTATOR (310) VALVE SECTION .................................................................. 70-26
LIGHT DUTY ..........................................................................20-12 HOUSING, PVG 100 MAIN SAW VALVE SECTION.................. 70-28
GEAR, SUPERCUT 100 SAW ASSEMBLY HOUSING, PVG 100 R.H. FEED MOTOR
(MAIN HOUSING) ..................................................................40-14 VALVE SECTION .................................................................. 70-24
GUARD MAIN FRAME ...............................................................20-22 HOUSING, ROTATOR (310 STANDARD) ................................. 20-10
GUARD, HEAD MODULE HOUSING, ROTATOR (310) LIGHT DUTY................................ 20-12
(TIMBERRITE CONTROLLER)................................................50-2 HOUSING, ROTATOR MANIFOLD............................................ 70-38
GUARD, MAIN SAW UNIT ASSEMBLY .....................................40-28 HOUSING, SUPERCUT 100 SAW ASSEMBLY
GUARD, ROTATOR (310 STANDARD) ......................................20-10 (MAIN HOUSING) ................................................................. 40-14
GUARD, ROTATOR (310) LIGHT DUTY ....................................20-12 HUB, FIXED FEED UNIT ........................................................... 20-40
GUARD, SAW UNIT-3/4" SAW ...................................................40-26 HUB, SPROCKET AND MOTOR SEAL KIT
GUARD, SUPER CUT 100 SAW ASSEMBLY ............................40-12 SAW UNIT-3/4" SAW............................................................. 40-32
GUARDS, MAIN FRAME ............................................................20-24 HULTDINS SUPERCUT 100, SAW UNIT .................................. 40-14
GUIDE TOOL ................................................................................80-6 HYDRAULIC CYLINDER BARREL, SUPERCUT 100
GUIDE, DIAMETER MEASURING SAW ASSEMBLY (MAIN HOUSING) .................................... 40-14
(TIMBERMATIC T10) .............................................................50-20 HYDRAULIC CYLINDER, TOP SAW ASSEMBLY....................... 40-4
GUIDE, DIAMETER MEASURING HYDRAULIC FITTINGS ............................................................. 70-20
TIMBERRITE (SN -000017) ...................................................50-16 HYDRAULIC HOSE SPECIFICATIONS..................................... 70-73
GUIDE, DIAMETER MEASURING - TIMBERRITE HYDRAULIC HOSE SPECIFICATIONS
(SN 000018- ) & TR100..........................................................50-18 (CONTINUED)....................................................................... 70-74
HYDRAULIC HOSE SPECIFICATIONS
(CONTINUED)....................................................................... 70-75
H HYDRAULIC HOSES, CASE DRAIN......................................... 70-56
HYDRAULIC HOSES, FEED ARM ............................................ 70-50
HARNESS, ELECTRICAL CONNECTOR (TR100) ....................50-46 HYDRAULIC HOSES, FEED MOTOR ....................................... 70-54
HARVESTER CAB DECALS ........................................................90-4 HYDRAULIC HOSES, LOWER DELIMB CYLINDER ................ 70-48
HARVESTER HEAD ...................................................................20-20 HYDRAULIC HOSES, MAIN SAW............................................. 70-58
HARVESTER HEAD DECALS......................................................90-2 HYDRAULIC HOSES, MAIN SAW
HEAD MODULE BOX (SUPER CUT 100) ................................................................ 70-60
(TIMBERMATIC T10 CONTROLLER)......................................50-8 HYDRAULIC HOSES, MEASURING ......................................... 70-52
HEAD MODULE BOX (TIMBERRITE CONTROLLER) ................50-2 HYDRAULIC HOSES, SWIVEL ................................................. 70-64
HEAD MODULE BOX MOUNTING HYDRAULIC HOSES, TILT CYLINDER..................................... 70-44
(TIMBERMATIC T10 CONTROLLER)......................................50-4 HYDRAULIC HOSES, TOP SAW .............................................. 70-62
HEAD MODULE BOX MOUNTING HYDRAULIC HOSES, UPPER DELIMB CYLINDER................. 70-46
(TR100 CONTROLLER)...........................................................50-6 HYDRAULIC MOTOR,
HEAD, HARVESTER ..................................................................20-20 SUPER CUT 100 SAW ASSEMBLY...................................... 40-12
HOLDER, BAR, SUPER CUT 100 SAW ASSEMBLY.................40-18 HYDRAULIC MOTOR, MAIN SAW UNIT ASSEMBLY............... 40-28
HOLDER, SUPER CUT 100 SAW ASSEMBLY ..........................40-12 HYDRAULIC VALVE FITTINGS ................................................. 70-22
HOSE SPECIFICATIONS, HYDRAULIC ....................................70-73
HOSE SPECIFICATIONS, HYDRAULIC
(CONTINUED)........................................................................70-74 I
HOSE SPECIFICATIONS, HYDRAULIC
(CONTINUED)........................................................................70-75 INDEXATOR, TILT ....................................................................... 20-4
HOSE, TEST (0.404 SAW) ...........................................................80-2 INNER SWIVEL ......................................................................... 20-14
HOSES AND FITTINGS, ELECTRICAL ISOLATOR, HEAD MODULE
(TIMBERMATIC T10) .............................................................50-52 (TIMBERMATIC T10 CONTROLLER)..................................... 50-4
HOSES AND FITTINGS, ELECTRICAL ISOLATOR, HEAD MODULE
(TIMBERMATIC T10) .............................................................50-54 (TIMBERMATIC T10 CONTROLLER)..................................... 50-8
HOSES AND FITTINGS, ELECTRICAL ISOLATOR, HEAD MODULE
(TIMBERRITE) .......................................................................50-50 (TIMBERRITE CONTROLLER)............................................... 50-2
HOSES, CASE DRAIN ...............................................................70-56 ISOLATOR, MEASURING ARM OPTION.................................. 50-14
HOSES, FEED ARM...................................................................70-50
HOSES, FEED MOTOR..............................................................70-54
HOSES, LOWER DELIMB CYLINDER.......................................70-48 K
HOSES, MAIN SAW ...................................................................70-58
HOSES, MAIN SAW KIT, ADJUSTER, 3/4" SAW UNIT .............................................. 40-30
(SUPER CUT 100) .................................................................70-60

10-6 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)

PN=6
 10-7
WARATAH HTH616C HARVESTER
ALPHABETICAL INDEX - CONTINUED
PAGE PAGE
KIT, SEAL, SUPER CUT 100 SAW SPROCKET MANIFOLD, ROTATOR (310 STANDARD)................................ 20-10
AND MOTOR SEALS.............................................................40-20 MANIFOLD, ROTATOR (310) LIGHT DUTY.............................. 20-12
KIT, SPECIAL SERVICE TOOLS..................................................80-8 MANIFOLD, SUPER CUT 100 LUBRICATION PUMP............... 40-16
KIT, SPROCKET AND MOTOR SEAL KIT MANIFOLD, VALVE.................................................................... 70-18
SAW UNIT-3/4" SAW..............................................................40-32 MEASURING ARM OPTION...................................................... 50-14
KIT, TOOL (0.404 SAW)................................................................80-2 MEASURING CYLINDER ............................................................ 30-6
KIT, TOP SAW HYDRAULIC MOTOR ..........................................40-8 MEASURING HOSES................................................................ 70-52
KIT, TOP SAW SPROCKET..........................................................40-6 MEASURING UNIT .................................................................... 20-36
KITS, SEAL, VALVE SECTION.....................................................70-6 MEASURING WHEEL, MEASURING UNIT .............................. 20-36
KNIFE .........................................................................................20-28 MEASURING-DIAMETER (TIMBERMATIC T10)....................... 50-20
KNIFE, FIXED TOP.....................................................................20-28 MEASURING-DIAMETER - TIMBERRITE
(SN -000017) ......................................................................... 50-16
MEASURING-DIAMETER - TIMBERRITE
L (SN 000018- ) & TR100......................................................... 50-18
MOTOR HOSES, FEED............................................................. 70-54
LABEL, COVER ..........................................................................20-26 MOTOR SEALS AND SPROCKET,
LABEL, MAIN FRAME ................................................................20-22 SUPER CUT 100 SAW.......................................................... 40-20
LENGTH MEASURING ARM, MEASURING UNIT ....................20-36 MOTOR, FIXED FEED UNIT ..................................................... 20-40
LENGTH MEASURING WHEELS ..............................................20-38 MOTOR, ROTATOR (310 STANDARD) ..................................... 20-10
LINK (310 LIGHT DUTY ROTATOR) ............................................20-8 MOTOR, ROTATOR (310) LIGHT DUTY ................................... 20-12
LINK (310 STANDARD) ................................................................20-6 MOTOR, SAW ASSEMBLY.......................................................... 40-4
LINK, DIAMETER MEASURING MOTOR, STRAIGHT FEED ARM MOTORS ............................. 20-46
TIMBERRITE (SN -000017) ...................................................50-16 MOTORS, ANGLED FEED UNIT FEED ARM ........................... 20-48
LINK, DIAMETER MEASURING - TIMBERRITE MULTIMETER (0.404 SAW)......................................................... 80-2
(SN 000018- ) & TR100..........................................................50-18
LINK, FEED ARM .......................................................................20-44
LINK, FEED UNIT ARMS............................................................20-42 N
LINK, TILT INDEXATOR ...............................................................20-4
LINK, TILT UNIT............................................................................20-2 NON TOP SAW, VALVE MANIFOLD PVG32............................... 70-8
LOCK PLATE, SPROCKET AND MOTOR SEAL KIT
SAW UNIT-3/4" SAW..............................................................40-32
LOCKING COLLAR, FEED UNIT ARMS ....................................20-42 O
LOGRITE CONTROLLER SENSOR WHEEL.............................40-14
LOWER DELIMB BUSHES.........................................................20-54 O-RING, ROTATOR MANIFOLD................................................ 70-38
LOWER DELIMB CYLINDER .....................................................30-12 O-RING, VALVE MANIFOLD...................................................... 70-18
LOWER DELIMB CYLINDER HOSES........................................70-48 O-RINGS, VALVE SECTION SEAL KITS..................................... 70-6
LOWER DELIMBER ARM ..........................................................20-52 OIL PUMP, SAW UNIT-3/4" SAW............................................... 40-34
LOWER KNIFE MANIFOLD........................................................70-42 OILER HOSES 3/4" MAIN SAW - NON TOP SAW .................... 70-70
LUBRICATION MANIFOLD, SUPER CUT 100 OILER HOSES 3/4" MAIN SAW - TOP SAW ............................. 70-66
NON TOP SAW ......................................................................40-22 OUTER SWIVEL ........................................................................ 20-14
LUBRICATION MANIFOLD, SUPER CUT 100
WITH TOPPING SAW ............................................................40-24
P
M PIN, DELIMBER UNIT ............................................................... 20-30
PIN, MEASURING ARM OPTION.............................................. 50-14
MAIN FRAME .............................................................................20-22 PIN, TILT FRAME (INDEXATOR) .............................................. 20-18
MAIN FRAME GUARDS .............................................................20-24 PIN, TILT FRAME (310) ............................................................. 20-16
MAIN SAW ASSEMBLY COMPONENTS - SUPERCUT PINS, FEED UNIT ARMS .......................................................... 20-42
100 .........................................................................................40-14 PISTON ROD SEAL - SUPERCUT 100..................................... 40-14
MAIN SAW ASSEMBLY PISTON - SUPERCUT 100..................40-14 PISTON ROD SEAL, MAIN SAW ASSEMBLY -
MAIN SAW ASSEMBLY PISTON ROD SEAL - SUPERCUT 100.................................................................... 40-14
SUPERCUT 100.....................................................................40-14 PISTON SEAL - SUPERCUT 100.............................................. 40-14
MAIN SAW ASSEMBLY PISTON SEAL - PISTON SEAL, MAIN SAW ASSEMBLY -
SUPERCUT 100.....................................................................40-14 SUPERCUT 100.................................................................... 40-14
MAIN SAW HOSES ....................................................................70-58 PISTON, MAIN SAW ASSEMBLY - SUPERCUT 100................ 40-14
MAIN SAW HOSES PISTON, OIL PUMP, SAW UNIT-3/4" SAW ............................... 40-34
(SUPER CUT 100) .................................................................70-60 PLATE, SERIAL NUMBER, MAIN FRAME ................................ 20-22
MAIN SAW VALVE SECTION, PVG 100 ....................................70-28 PLATE, 3/4" SAW UNIT ............................................................. 40-30
MAIN VALVE AND FITTINGS .....................................................70-20 PLIERS ........................................................................................ 80-4
MAIN 3/4 SAW CYLINDER.........................................................30-14 PLUG, HEAD MODULE
MANIFOLD, LOWER KNIFE.......................................................70-42 (TIMBERMATIC T10 CONTROLLER)..................................... 50-4
MANIFOLD, PVG 100 TOP SAW ...............................................70-30 PLUG, HEAD MODULE
MANIFOLD, PVG 100 TOP SAW ...............................................70-32 (TIMBERMATIC T10 CONTROLLER)..................................... 50-8
MANIFOLD, PVG32......................................................................70-8 PLUG, HEAD MODULE
MANIFOLD, PVG32....................................................................70-10 (TIMBERRITE CONTROLLER)............................................... 50-2
MANIFOLD, ROTATOR ..............................................................70-38

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 10-7

PN=7
 10-8
WARATAH HTH616C HARVESTER
ALPHABETICAL INDEX - CONTINUED
PAGE PAGE
POTENTIOMETER, DIAMETER MEASURING S
TIMBERRITE (SN -000017) ...................................................50-16
POTENTIOMETER, DIAMETER MEASURING SAFETY SIGN, MAIN FRAME................................................... 20-22
TIMBERRITE(SN 000018- ) ...................................................50-18 SAFETY SIGN, MAIN FRAME................................................... 20-24
PROXIMITY SWITCH, TOP SAW...............................................50-12 SAW ARM, MAIN SAW UNIT ASSEMBLY................................. 40-28
PROXIMITY SWITCH, 3/4" MAIN SAW......................................50-24 SAW ASSEMBLY, SUPER CUT 100.......................................... 40-12
PULLER, SPECIAL SERVICE TOOLS .........................................80-8 SAW ASSEMBLY,SUPERCUT 100(MAIN HOUSING)............... 40-14
PUMP, LUBRICATION, SUPER CUT 100 ..................................40-16 SAW CHAIN, SAW UNIT-3/4" SAW ........................................... 40-26
PUMP, OIL, SAW UNIT-3/4" SAW ..............................................40-34 SAW CHAIN, SUPER CUT 100 SAW ASSEMBLY .................... 40-12
PVG 100 L.H. FEED MOTOR VALVE SECTION........................70-26 SAW CHAIN, SUPER CUT 100 SAW UNIT............................... 40-10
PVG 100 MAIN SAW VALVE SECTION .....................................70-28 SAW CHAIN, TOP SAW............................................................... 40-2
PVG 100 NON-TOP SAW MANIFOLD SAW HOSES, MAIN................................................................... 70-58
( -00037).................................................................................70-34 SAW HOSES, MAIN
PVG 100 NON-TOP SAW MANIFOLD (SUPER CUT 100) ................................................................ 70-60
(00038- ).................................................................................70-36 SAW HOSES, TOP .................................................................... 70-62
PVG 100 R.H. FEED MOTOR VALVE SECTION .......................70-24 SAW STAND, SUPERCUT 100 SAW ASSEMBLY
PVG 100 TOP SAW MANIFOLD ................................................70-30 (MAIN HOUSING) ................................................................. 40-14
PVG 100 TOP SAW MANIFOLD ................................................70-32 SAW UNIT HULTDINS SUPERCUT 100 ................................... 40-14
PVG 32 FEED ARM VALVE SECTION.......................................70-14 SAW UNIT SLIDER.................................................................... 40-30
PVG 32 TILT VALVE SECTION ..................................................70-16 SAW UNIT-3/4" SAW ................................................................. 40-26
PVG 32 UPPER DELIMB VALVE SECTION...............................70-12 SAW UNIT, SUPER CUT 100 .................................................... 40-10
PVG32 MANIFOLD.......................................................................70-8 SAW UNIT, TOP SAW.................................................................. 40-2
PVG32 MANIFOLD.....................................................................70-10 SAW, TOP .................................................................................... 40-2
SCREWDRIVER .......................................................................... 80-4
SEAL KIT, FEED ARM CYLINDER .............................................. 30-8
R SEAL KIT, LOWER DELIMB CYLINDER ................................... 30-12
SEAL KIT, MAIN 3/4 SAW.......................................................... 30-14
RELAY BOX BASE - TR100 CONTROLLER..............................50-10 SEAL KIT, MEASURING CYLINDER........................................... 30-6
RELAY OMRON - TR100 CONTROLLER ..................................50-10 SEAL KIT, PVG 100 L.H. FEED MOTOR
RELIEF VALVE, PVG 100 L.H. FEED MOTOR VALVE SECTION .................................................................. 70-26
VALVE SECTION ...................................................................70-26 SEAL KIT, PVG 100 NON-TOP SAW MANIFOLD
RELIEF VALVE, PVG 100 NON-TOP SAW ( -00037) ................................................................................ 70-34
MANIFOLD ( -00037) .............................................................70-34 SEAL KIT, PVG 100 NON-TOP SAW MANIFOLD
RELIEF VALVE, PVG 100 NON-TOP SAW (00038- ) ................................................................................ 70-36
MANIFOLD (00038- ) .............................................................70-36 SEAL KIT, PVG 100 R.H. FEED MOTOR
RELIEF VALVE, PVG 100 R.H. FEED MOTOR VALVE SECTION .................................................................. 70-24
VALVE SECTION ...................................................................70-24 SEAL KIT, PVG 100 TOP SAW MANIFOLD .............................. 70-30
RELIEF VALVE, PVG 100 TOP SAW MANIFOLD......................70-30 SEAL KIT, PVG 100 TOP SAW MANIFOLD .............................. 70-32
RELIEF VALVE, PVG 100 TOP SAW MANIFOLD......................70-32 SEAL KIT, PVG 32 FEED ARM
RELIEF VALVE, PVG 32 FEED ARM VALVE SECTION .................................................................. 70-14
VALVE SECTION ...................................................................70-14 SEAL KIT, PVG 32 TILT VALVE SECTION ................................ 70-16
RELIEF VALVE, PVG 32 TILT VALVE SECTION........................70-16 SEAL KIT, PVG 32 UPPER DELIMB
RELIEF VALVE, PVG 32 UPPER DELIMB VALVE SECTION .................................................................. 70-12
VALVE SECTION ...................................................................70-12 SEAL KIT, ROTATOR (310 STANDARD) MOTOR..................... 20-10
RELIEF VALVE, ROTATOR MANIFOLD.....................................70-38 SEAL KIT, ROTATOR (310) MOTOR
RELIEF VALVE, VALVE MANIFOLD...........................................70-18 LIGHT DUTY ......................................................................... 20-12
RELIEF VALVE,PVG 100 MAIN VALVE SECTION.....................70-28 SEAL KIT, SUPER CUT 100 SAW SPROCKET AND
RETAINER, FEED UNIT ARMS..................................................20-42 MOTOR SEALS..................................................................... 40-20
RETAINER, MAIN SAW UNIT ASSEMBLY.................................40-28 SEAL KIT, TILT FRAME CYLINDER .......................................... 30-10
RETAINER, SPROCKET AND MOTOR SEAL KIT SEAL KIT, TOP SAW ................................................................... 30-2
SAW UNIT-3/4" SAW..............................................................40-32 SEAL KIT, UPPER DELIMB CYLINDER...................................... 30-4
RETAINER, TOP SAW SPROCKET .............................................40-6 SEAL KIT, VALVE MANIFOLD ................................................... 70-18
RING GEAR, ROTATOR (310 STANDARD) ...............................20-10 SEAL KIT,PVG 100 MAIN SAWVALVE SECTION ..................... 70-28
RING GEAR, ROTATOR (310) SEAL KITS, VALVE SECTION ..................................................... 70-6
LIGHT DUTY ..........................................................................20-12 SEAL, MAIN SAW UNIT ASSEMBLY ........................................ 40-28
ROD, SUPERCUT 100 SAW ASSEMBLY SEAL, MEASURING UNIT......................................................... 20-36
(MAIN HOUSING) ..................................................................40-14 SEAL, PISTON - SUPERCUT 100............................................. 40-14
ROD, VALVE SECTION SEAL KITS.............................................70-6 SEAL, PISTON ROD - SUPERCUT 100.................................... 40-14
ROTATOR (310 STANDARD) .....................................................20-10 SEAL, TOP SAW HYDRAULIC MOTOR ..................................... 40-8
ROTATOR (310) LIGHT DUTY ...................................................20-12 SENSOR WHEEL, LOGRITE CONTROLLER........................... 40-14
ROTATOR LINK (310)(LIGHT DUTY)...........................................20-8 SENSOR WHEEL, TIMBERMATIC CONTROLLER .................. 40-14
ROTATOR MANIFOLD ...............................................................70-38 SENSOR, CUT CONTROL, SUPER CUT 100 .......................... 50-22
ROTATOR, TILT INDEXATOR ......................................................20-4 SENSOR, FIND END ................................................................... 60-2
ROTATOR, TILT UNIT...................................................................20-2 SERIAL NUMBER PLATE, MAIN FRAME ................................. 20-22
SERIAL NUMBER PLATE, MAIN FRAME ................................. 20-24
SHIM, SPROCKET AND MOTOR SEAL KIT
SAW UNIT-3/4" SAW............................................................. 40-32

10-8 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)

PN=8
 10-9
WARATAH HTH616C HARVESTER
ALPHABETICAL INDEX - CONTINUED
PAGE PAGE
SHIMS, TOP SAW SPROKET KIT ...............................................40-6 SUPPORT, MEASURINGARM OPTION.................................... 50-14
SIGN, COVER ............................................................................20-26 SUPPORT, 3/4" MAIN SAW PROXIMITY SWITCH ................... 50-24
SIGN, SAFETY, MAIN FRAME ...................................................20-22 SWITCH, FIND END .................................................................... 60-2
SLEEVING, ELECTRICAL (TIMBERMATIC T10).......................50-52 SWIVEL...................................................................................... 20-14
SLEEVING, ELECTRICAL (TIMBERMATIC T10).......................50-54 SWIVEL HOSES ........................................................................ 70-64
SLEEVING, ELECTRICAL (TIMBERRITE).................................50-50 SWIVEL, TILT INDEXATOR......................................................... 20-4
SLEEVING, SPLIT (TIMBERMATIC T10) ...................................50-52 SWIVEL, TILT UNIT ..................................................................... 20-2
SLEEVING, SPLIT (TIMBERMATIC T10) ...................................50-54
SLEEVING, SPLIT (TIMBERRITE).............................................50-50
SLIDE PLATE, TOP SAW ASSEMBLY .........................................40-4 T
SLIDER, 3/4" SAW UNIT ............................................................40-30
SOCKET WRENCH ......................................................................80-4 TENSIONING DEVICE - SUPERCUT 100 ................................ 40-14
SOLENOID VALVE COIL, VALVE MANIFOLD ...........................70-18 TERMINAL BLOCK - RELAY BOX
SPACER, FEED UNIT ARMS .....................................................20-42 TR100 CONTROLLER .......................................................... 50-10
SPACER, LENGTH MEASURING WHEEL ................................20-38 TEST GAUGE, HYDRAULIC (0.404 SAW).................................. 80-2
SPANNER (0.404 SAW) ...............................................................80-2 THREE FOURTHS INCH MAIN SAW
SPECIAL SERVICE TOOL KIT.....................................................80-8 PROXIMITY SWITCH............................................................ 50-24
SPECIAL SERVICE TOOLS .........................................................80-8 TILT CYLINDER HOSES ........................................................... 70-44
SPECIFICATIONS, ELECTRICAL CABLE .................................50-44 TILT FRAME (INDEXATOR) ...................................................... 20-18
SPECIFICATIONS, ELECTRICAL CABLE TILT FRAME (310) ..................................................................... 20-16
(CONTINUED)........................................................................50-45 TILT FRAME CYLINDER ........................................................... 30-10
SPECIFICATIONS, ELECTRICAL CABLE TILT FRAME PIN (INDEXATOR) ............................................... 20-18
(TIMBERRITE) .......................................................................50-34 TILT FRAME PIN (310) .............................................................. 20-16
SPECIFICATIONS, ELECTRICAL CABLE TILT INDEXATOR ........................................................................ 20-4
(TIMBERRITE)(CONT)...........................................................50-35 TILT INDEXATOR FRAME........................................................... 20-4
SPECIFICATIONS, HYDRAULIC HOSE ....................................70-73 TILT INDEXATOR LINK ............................................................... 20-4
SPECIFICATIONS, HYDRAULIC HOSE TILT INDEXATOR ROTATOR ...................................................... 20-4
(CONTINUED)........................................................................70-74 TILT INDEXATOR SWIVEL.......................................................... 20-4
SPECIFICATIONS, HYDRAULIC HOSE TILT UNIT..................................................................................... 20-2
(CONTINUED)........................................................................70-75 TILT UNIT FRAME ....................................................................... 20-2
SPLIT SLEEVING (TIMBERMATIC T10) ....................................50-52 TILT UNIT LINK............................................................................ 20-2
SPLIT SLEEVING (TIMBERMATIC T10) ....................................50-54 TILT UNIT ROTATOR................................................................... 20-2
SPLIT SLEEVING (TIMBERRITE)..............................................50-50 TILT UNIT SWIVEL ...................................................................... 20-2
SPRING, PVG 100 L.H. FEED MOTOR TIMBERMATIC CONTROLLER SENSOR WHEEL ................... 40-14
VALVE SECTION ...................................................................70-26 TOOL BOX ................................................................................... 80-4
SPRING, PVG 100 MAIN SAW VALVE SECTION......................70-28 TOOL KIT (0.404 SAW) ............................................................... 80-2
SPRING, PVG 100 R.H. FEED MOTOR TOOL, GUIDE .............................................................................. 80-6
VALVE SECTION ...................................................................70-24 TOOLS, SPECIAL SERVICE ....................................................... 80-8
SPROCKET AND MOTOR SEAL KIT, TOP SAW..................................................................................... 40-2
SAW UNIT-3/4" SAW..............................................................40-32 TOP SAW ASSEMBLY................................................................. 40-4
SPROCKET AND MOTOR SEALS TOP SAW CYLINDER.................................................................. 30-2
SAW UNIT SUPER CUT 100 SAW ........................................40-20 TOP SAW HOSES ..................................................................... 70-62
SPROCKET, TOP SAW ................................................................40-6 TOP SAW HYDRAULIC MOTOR................................................. 40-8
STAND, SAW ..............................................................................40-14 TOP SAW HYDRAULIC MOTOR SEAL KIT ................................ 40-8
STANDARD DELIMB ARMS.......................................................20-32 TOP SAW PROXIMITY SWITCH............................................... 50-12
STRAIGHT FEED ARM MOTORS..............................................20-46 TOP SAW SPROCKET ................................................................ 40-6
STRAINER, OIL PUMP, SAW UNIT-3/4" SAW ...........................40-34 TOP SAW SPROKET KIT ............................................................ 40-6
STRAINER, SUPER CUT 100 LUBRICATION MANI TOP SAW, VALVE MANIFOLD PVG32...................................... 70-10
FOLD NON TOP SAW ...........................................................40-22
STRAINER, SUPER CUT 100 LUBRICATION MANI
FOLD WITH TOPPING SAW .................................................40-24 U
STRAINER, SUPER CUT 100 LUBRICATION PUMP................40-16
STUD, 3/4" SAW UNIT................................................................40-30 UNIT, MEASURING ................................................................... 20-36
SUPER CUT 100 SAW ASSEMBLY ...........................................40-12 UNIT, TILT .................................................................................... 20-2
SUPER CUT 100 CUT CONTROL .............................................50-22 UPPER DELIMB CYLINDER ....................................................... 30-4
SUPER CUT 100 LUBRICATION MANIFOLD UPPER DELIMB CYLINDER HOSES........................................ 70-46
NON TOP SAW ......................................................................40-22
SUPER CUT 100 LUBRICATION MANIFOLD
WITH TOPPING SAW ............................................................40-24 V
SUPER CUT 100 LUBRICATION PUMP ....................................40-16
SUPER CUT 100 OILER HOSES...............................................70-68 VALVE , PVG 100 TOP SAW MANIFOLD.................................. 70-30
SUPER CUT 100 SAW ASSEMBLY (BAR HOLDER) ................40-18 VALVE , PVG 100 TOP SAW MANIFOLD.................................. 70-32
SUPER CUT 100 SAW SPROCKET AND VALVE ASSEMBLY (TOPSAW) ................................................... 70-4
MOTOR SEALS .....................................................................40-20 VALVE ASSEMBLY (WITHOUT TOPSAW) ................................. 70-2
SUPER CUT 100 SAW UNIT......................................................40-10 VALVE COVER, MAIN FRAME GUARDS ................................. 20-24
SUPERCUT 100 HULTDINS SAW UNIT ....................................40-14 VALVE FITTINGS....................................................................... 70-22
SUPERCUT 100 SAW ASSEMBLY (MAIN HOUSING) ..............40-14 VALVE FITTINGS, HYDRAULIC ................................................ 70-22

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 10-9

PN=9
 10-10
WARATAH HTH616C HARVESTER
ALPHABETICAL INDEX - CONTINUED
PAGE PAGE
VALVE MANIFOLD .....................................................................70-18
VALVE MANIFOLD PVG32...........................................................70-8
VALVE MANIFOLD PVG32, NON TOP SAW ...............................70-8
VALVE MANIFOLD PVG32, TOP SAW ......................................70-10
VALVE MANIFOLD, TOP SAW ...................................................70-10
VALVE SECTION SEAL KITS.......................................................70-6
VALVE SECTION, PVG 100 L.H. FEED MOTOR.......................70-26
VALVE SECTION, PVG 100 R.H. FEED MOTOR ......................70-24
VALVE SECTION, PVG 32 FEED ARM......................................70-14
VALVE SECTION, PVG 32 TILT .................................................70-16
VALVE SECTION, PVG 32 UPPER DELIMB..............................70-12
VALVE SPOOL, PVG 100 L.H. FEED MOTOR
VALVE SECTION ...................................................................70-26
VALVE SPOOL, PVG 100 MAIN SAW
VALVE SECTION ...................................................................70-28
VALVE SPOOL, PVG 100 NON-TOP SAW
MANIFOLD ( -00037) .............................................................70-34
VALVE SPOOL, PVG 100 NON-TOP SAW
MANIFOLD (00038- ) .............................................................70-36
VALVE SPOOL, PVG 100 R.H. FEED MOTOR
VALVE SECTION ...................................................................70-24
VALVE SPOOL, PVG 32 FEED ARM
VALVE SECTION ...................................................................70-14
VALVE SPOOL, PVG 32 TILT VALVE SECTION........................70-16
VALVE SPOOL, PVG 32 UPPER DELIMB
VALVE SECTION ...................................................................70-12
VALVE, CHECK, SAW ASSEMBLY ............................................40-12
VALVE, CONTROL, SAW ASSEMBLY .......................................40-12
VALVE, RELIEF, ROTATOR MANIFOLD ....................................70-38
VALVE, VALVE MANIFOLD ........................................................70-18

W
WARNING LABEL, HARVESTER CAB DECALS .........................90-4
WARNING LABEL, HARVESTER HEAD DECALS ......................90-2
WHEEL, FIXED FEED UNIT.......................................................20-40
WHEEL, SUPERCUT 100 SAW ASSEMBLY
(MAIN HOUSING) ..................................................................40-14
WHEELS, FEED, TMVW DEBARKING ......................................20-50
WHEELS, FEED, TMVW THUMBNAIL ......................................20-50
WHEELS, LENGTH MEASURING .............................................20-38
WIRING LEAD, DIAMETER MEASURING
(TIMBERMATIC T10) .............................................................50-20
WIRING LEAD, DIAMETER MEASURING
TIMBERRITE (SN -000017) ...................................................50-16
WIRING LEAD, DIAMETER MEASURING
TIMBERRITE (SN 000018- ) & TR100...................................50-18
WRENCH, ALLEN ........................................................................80-4
WRENCH, OPEN END/BOX END ................................................80-4
WRENCH, SOCKET .....................................................................80-4
WRENCH, SPANNER (0.404 SAW) .............................................80-2

10-10 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)

PN=10
 20-1
MECHANICAL
MEMORANDA

WARATAH HTH616C HARVESTER PC10314 (11-MAY-10) 20-1

PN=11
 20-2
MECHANICAL
TILT UNIT WITH SWIVEL (310)
TX1056638 -UN-08JUN09

THIS PARTS LISTING IS CONTINUED

20-2 WARATAH HTH616C HARVESTER PC10314 (23-JUL-09)
PN=12
 20-3
MECHANICAL
TILT UNIT WITH SWIVEL (310)

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA101381 LINK 1
2 WA108191 ROTATOR 1
3 WA110656 SWIVEL 1
4 ........ FRAME 1 TILT UNIT

WARATAH HTH616C HARVESTER PC10314 (23-JUL-09) 20-3

PN=13
 20-4
MECHANICAL
TILT UNIT (INDEXATOR)
TX1057008 -UN-30APR09

THIS PARTS LISTING IS CONTINUED

20-4 WARATAH HTH616C HARVESTER PC10314 (23-JUL-09)
PN=14
 20-5
MECHANICAL
TILT UNIT (INDEXATOR)

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA104991 LINK 1
2 ........ ROTATOR 1 INDEXATOR
3 WA110656 SWIVEL 1
4 ........ FRAME 1 TILT UNIT

WARATAH HTH616C HARVESTER PC10314 (23-JUL-09) 20-5

PN=15
 20-6
MECHANICAL
LINK (310 STANDARD)
TX1063388 -UN-26AUG09

THIS PARTS LISTING IS CONTINUED

20-6 WARATAH HTH616C HARVESTER PC10314 (11-MAY-10)
PN=16
 20-7
MECHANICAL
LINK (310 STANDARD)

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 F350496 BUSHING 2
2 F351031 LUBRICATION FITTING 2 UNF 1/4" GREASE
3 ........ LINK 1
4 WA101387 LINK 1

WARATAH HTH616C HARVESTER PC10314 (11-MAY-10) 20-7

PN=17
 20-8
MECHANICAL
LINK (310 LIGHT DUTY ROTATOR)
TX1059928 -UN-28MAY09

THIS PARTS LISTING IS CONTINUED

20-8 WARATAH HTH616C HARVESTER PC10314 (23-JUL-09)
PN=18
 20-9
MECHANICAL
LINK (310 LIGHT DUTY ROTATOR)

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA105114 BUSHING 1
2 F351031 LUBRICATION FITTING 2 UNF 1/4" GREASE
3 ........ LINK 1
4 WA105109 BUSHING 1
5 WA104991 LINK 1

WARATAH HTH616C HARVESTER PC10314 (11-MAY-10) 20-9

PN=19
 20-10
MECHANICAL
ROTATOR (310 STANDARD)
TX1059895 -UN-23JUN09

THIS PARTS LISTING IS CONTINUED

20-10 WARATAH HTH616C HARVESTER PC10314 (23-JUL-09)
PN=20
 20-11
MECHANICAL
ROTATOR (310 STANDARD)

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 19H2433 CAP SCREW 2 1/2" X 2" UNC G8

2 F350440 RETAINER 1
3 F350476 PIN 1 2 1/2" X 323
4 F351025 NUT 2 UNC 1/2" NYLOC G8
5 F351094 MANIFOLD 1
6 WA100044 WASHER 20 1/2" HARDENED
7 WA100184 LUBRICATION FITTING 1 UNF 1/4" GREASE 45 DEG
8 WA100221 BOLT 4 UNC 1/2" X 1 1/4" G8
9 WA109707 MOTOR 1 HYDRAULIC
WA109709 KIT AR MOTOR SEAL HIGH PRESSURE
10 WA101988 WASHER 1 3/4"DISC LOCK
11 WA102555 WASHER 8 1/2" DISC LOCK
12 19H2029 CAP SCREW 18 1/2" X 2-1/4"
13 WA102701 BOLT 1 UNC 3/4" X 2" G8
14 19H2433 CAP SCREW 8 1/2" X 2" UNC G8
15 WA107674 GUARD 1
16 WA107760 RING GEAR 1
17 WA117041 ROTATOR 1 TOP, (SUB FOR WA110528)
18 WA109066 GUARD 2
19 WA109513 BEARING 1
20 WA118876 HOUSING 1 (SUB FOR WA110730)
21 WA109637 SPACER 1
22 WA109638 PINION 1
23 WA110636 LUBRICATION FITTING 2

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 20-11

PN=21
 20-12
MECHANICAL
ROTATOR (310 LIGHT DUTY)
TX1061042 -UN-25JUN09

THIS PARTS LISTING IS CONTINUED

20-12 WARATAH HTH616C HARVESTER PC10314 (23-JUL-09)
PN=22
 20-13
MECHANICAL
ROTATOR (310 LIGHT DUTY)

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 19H2433 CAP SCREW 2 1/2" X 2" UNC G8

2 F350476 RETAINER 1
3 WA116338 PIN 1 2 1/2" X 300
4 F351025 NUT 2 UNC 1/2" NYLOC G8
5 F351094 MANIFOLD 1
6 WA100044 WASHER 20 1/2" HARDENED
7 WA100184 LUBRICATION FITTING 1 UNF 1/4" GREASE 45 DEG
8 WA100221 BOLT 4 UNC 1/2" X 1 1/4" G8
9 WA109707 MOTOR 1 HYDRAULIC
WA109709 KIT AR MOTOR SEAL HIGH PRESSURE
10 WA101988 WASHER 1 3/4"DISC LOCK
11 WA102555 WASHER 8 1/2" DISC LOCK
12 19H2029 CAP SCREW 18 1/2" X 2-1/4"
13 WA102701 BOLT 1 UNC 3/4" X 2" G8
14 19H2433 CAP SCREW 8 1/2" X 2" UNC G8
15 WA107674 GUARD 1
16 WA107760 RING GEAR 1
17 WA117041 ROTATOR 1 TOP, (SUB FOR WA110528)
18 WA109066 GUARD 2
19 WA109513 BEARING 1
20 WA118876 HOUSING 1 (SUB FOR WA110730)
21 WA109637 SPACER 1
22 WA109638 PINION 1
23 WA116336 SPACER 2 BUSHING

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 20-13

PN=23
 20-14
MECHANICAL
SWIVEL
TX1079157 -UN-

THIS PARTS LISTING IS CONTINUED

20-14 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=24
 20-15
MECHANICAL
SWIVEL

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 F351031 LUBRICATION FITTING 3 UNF 1/4" GREASE

2 WA110566 SWIVEL 1 OUTER
3 WA110216 SWIVEL 1 INNER
4 19H2029 CAP SCREW 2 1/2" X 2-1/4" UNC G8
5 F351025 NUT 2 UNC 1/2" G8 NYLOC
6 WA101346 BOLT 2 UNC 7/8" X 3" G8
7 F350040 BUSHING 2
8 WA102019 WASHER 2 7/8" HARDENED
9 F351028 NUT 2 UNC 7/8" G8 NYLOC
10 WA102659 FITTING 2 NIPPLE, 1 BSPPM - 1-5/8 JICM
11 WA102143 WASHER 4 1" DOWTY -16
12 WA102022 FITTING 2 NIPPLE, 1 BSPPM - 1-7/16 ORFSM
13 WA110656 SWIVEL 1 KIT
14 WA102690 O-RING 2 731-021N90-ORFS ID 0.926" (23.5 MM) X W 0.07"
(1.78 MM) (-16)

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 20-15

PN=25
 20-16
MECHANICAL
TILT FRAME (310)
TX1059905 -UN-08JUN09

THIS PARTS LISTING IS CONTINUED

20-16 WARATAH HTH616C HARVESTER PC10314 (23-JUL-09)
PN=26
 20-17
MECHANICAL
TILT FRAME (310)

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA113732 FRAME 1 310 TILT UNIT

2 WA116061 PIN 1 HANGER
3 WA102957 COVER 1 ROTATOR
4 WA108454 PIN 1
5 F350429 WASHER 1
6 WA100820 BOLT 1
7 WA102654 WASHER 1
8 WA116497 LOCKING COLLAR 1
9 WA106371 ROUND RETAINER 1
10 WA102540 BOLT 1
11 19H3627 BOLT 18 1/2" X 3"
12 WA100044 WASHER 18
13 WA102244 WASHER 1
14 WA101374 WASHER 2
15 WA100426 WASHER 1
16 F008646 SCREW 1

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 20-17

PN=27
 20-18
MECHANICAL
TILT FRAME (INDEXATOR)
TX1057209 -UN-07JUL09

THIS PARTS LISTING IS CONTINUED

20-18 WARATAH HTH616C HARVESTER PC10314 (23-JUL-09)
PN=28
 20-19
MECHANICAL
TILT FRAME (INDEXATOR)

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA115740 FRAME 1 INDEXATOR TILT UNIT

2 WA116061 PIN 1 HANGER
3 WA108454 PIN 1
4 WA106371 RETAINER 1
5 WA116497 LOCKING COLLAR 1
6 WA101374 WASHER 2
7 WA100820 BOLT 1
8 WA102654 WASHER 1
9 WA100977 BOLT 6
10 WA102955 WASHER 12
11 WA100837 NUT 6
12 F350429 WASHER 2
13 F003339 WASHER 1
14 WA102540 BOLT 1
15 WA100426 WASHER 1
16 F008646 SCREW 1
17 WA106583 PIN 1
18 WA106107 LOCK NUT 1 M30 DIN 982
19 WA106162 SPACER 1
20 WA100253 ROTATOR 1 AV 175
.. WA100934 SEAL KIT 1 INDEXATOR

WARATAH HTH616C HARVESTER PC10314 (23-JUL-09) 20-19

PN=29
 20-20
MECHANICAL
HEAD
TX1057045 -UN-09JUL09

THIS PARTS LISTING IS CONTINUED

20-20 WARATAH HTH616C HARVESTER PC10314 (23-JUL-09)
PN=30
 20-21
MECHANICAL
HEAD

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 ........ FRAME 1 TOP SAW MAIN FRAME

........ FRAME 1 STANDARD MAIN FRAME
2 ........ FEED UNIT 1 DEBARKING - ANGLED
........ FEED UNIT 1 DEBARKING - STRAIGHT (NOT PICTURED)
3 ........ DELIMBER 1 UPPER
4 ........ DELIMBER 1 SINGLE LOWER
5 ........ SAW UNIT 1 3/4 MAIN SAW
........ SAW UNIT 1 SUPERCUT 100
6 ........ ELECTRICAL EQUIPMENT 1
7 ........ CONTROL VALVE 1
8 ........ SAW UNIT 1 TOP SAW
9 ........ ARM 1 MEASURING ARM

WARATAH HTH616C HARVESTER PC10314 (11-MAY-10) 20-21

PN=31
 20-22
MECHANICAL
MAIN FRAME
TX1082616 -UN-

THIS PARTS LISTING IS CONTINUED

20-22 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=32
 20-23
MECHANICAL
MAIN FRAME

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 19M8607 CAP SCREW 1 M10 X 20

2 WA102244 WASHER 1
3 WA106371 RETAINER 1
4 WA101356 LUBRICATION FITTING 2
5 WA116278 PIN 1
6 WA101374 WASHER 2
7 F351025 NUT 8 1/2" UNC NYLOC
8 F350104 STOP 4
9 WA114028 CAP 1
10 WA113741 MAIN FRAME 1 TOPSAW
WA113739 MAIN FRAME 1 NON TOP SAW
11 WA112035 BUSHING 2
12 WA113003 LABEL 2
13 WA115777 FITTING 2 1/2 BSPPM - 11/16 ORFSM
14 WA102097 WASHER 2
15 F351059 HOLLOW SCREW 1
16 WA103458 FITTING 1 1/8 BSPP X 7/16 JIC
17 WA101547 SEALING WASHER 2 1/2 DOWTY (-08)
18 WA118952 O-RING 2 731-012N90-ORFS ID0.364" X W 0.07" (-06)

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 20-23

PN=33
 20-24
MECHANICAL
MAIN FRAME GUARDS
TX1072782 -UN-08MAR10

THIS PARTS LISTING IS CONTINUED

20-24 WARATAH HTH616C HARVESTER PC10314 (11-MAY-10)
PN=34
 20-25
MECHANICAL
MAIN FRAME GUARDS

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA102832 BOLT 3 M12 X 40

2 WA102555 WASHER 24
3 WA108160 GUARD 1
4 WA108161 GUARD 1
5 WA117145 COVER 1 (SUB FOR WA112869)
6 19M3205 CAP SCREW 8 M12 X 30
7 F351016 RIVET 4 1/8" BLIND
8 F350608 SERIAL NUMBER PLATE 1
9 WA114384 GUARD 1
10 19M3160 CAP SCREW 13 M12 X 20
11 WA110583 GUARD 1
12 WA114391 GUARD 2
13 WA100240 SAFETY SIGN 5
14 WA100221 BOLT 3
15 F350188 COVER 3
16 WA114386 GUARD 1
17 F350189 COVER 3
18 WA103101 NUT 3
19 WA100044 WASHER 3
20 WA117265 GUARD 1 (SUB FOR WA116165)
21 WA100820 SCREW 2 M16 X 40
22 WA117281 BRACKET 1 (SUB FOR WA116175)
23 19M3127 CAP SCREW 2 M8 X 16
24 WA114388 GUARD 1
25 WA117289 GUARD 1 (SUB FOR WA115930)
26 WA102654 LOCK WASHER 2 5/8"
27 WA117287 GUARD 1
28 F003569 NUT 2 M16

WARATAH HTH616C HARVESTER PC10314 (11-MAY-10) 20-25

PN=35
 20-26
MECHANICAL
COVER
TX1072783 -UN-08MAR10

THIS PARTS LISTING IS CONTINUED

20-26 WARATAH HTH616C HARVESTER PC10314 (11-MAY-10)
PN=36
 20-27
MECHANICAL
COVER

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA114379 COVER 1 (FRONT) TOPSAW (INCLUDES LABELS)

WA114380 COVER 1 (FRONT) NON TOPSAW (INCLUDES LABELS)
2 WA116354 COVER 1 (REAR) WITH LABEL
3 WA114406 LABEL 1 LH
4 WA114407 LABEL 1 RH
5 WA116033 LABEL 1
6 WA102832 BOLT 2
7 WA102555 WASHER 8 1/2" LOCK
8 19M8442 SCREW 2 M12 X 100
9 WA103101 NUT 2
10 WA116298 LABEL 2
11 WA116731 COVER 1 (REAR)
12 19M3205 CAP SCREW 4 M12 X 30
13 WA102832 BOLT 2 M12 X 40 CL 10.9
14 F003565 NUT 2 M12
15 WA117288 GUARD 1

WARATAH HTH616C HARVESTER PC10314 (11-MAY-10) 20-27

PN=37
 20-28
MECHANICAL
FIXED TOP KNIFE
TX1057030 -UN-24MAR09

THIS PARTS LISTING IS CONTINUED

20-28 WARATAH HTH616C HARVESTER PC10314 (23-JUL-09)
PN=38
 20-29
MECHANICAL
FIXED TOP KNIFE

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA114340 CUTTING EDGE 1 FIXED FRONT

WARATAH HTH616C HARVESTER PC10314 (23-JUL-09) 20-29

PN=39
 20-30
MECHANICAL
DELIMBER UNIT
TX1082617 -UN-

THIS PARTS LISTING IS CONTINUED

20-30 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=40
 20-31
MECHANICAL
DELIMBER UNIT

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 F008646 BOLT 2
2 WA100426 WASHER 2
3 WA100820 BOLT 2 M16 X 40
4 WA116351 LOCKING COLLAR 2
5 WA102654 WASHER 2 5/8" FLAT
6 WA103290 THREADED NIPPLE 2 1/2 BSPPM - 13/16 ORFSM
7 F350428 WASHER 1 51 X 85.5, NYLON
8 WA103589 WASHER 1 USED WITH MEASURING ARM
9 F350429 WASHER 2 51 X 85 X 10, NYLON
10 WA116179 SPACER 4 1-1/4 - 4MM THICK
11 WA106371 RETAINER 4
12 F350420 SPACER 1 USED WITH MEASURING ARM
13 WA106749 LINK 1
14 WA108454 PIN FASTENER 1
15 WA110438 PIN 1 1-1/4 X 125, (CUT TO LENGTH)
WA100086 PIN 1 1-1/4 X 114, (STANDARD)
16 WA116759 ARM 1 DELIMB LEFT HAND STANDARD
WA116353 ARM 1 DELIMB LEFT HAND (CUT TO LENGTH)
17 WA116760 ARM 1 DELIMB RIGHT HAND STANDARD
WA116352 ARM 1 DELIMB RIGHT HAND (CUT TO LENGTH)
18 WA116067 PIN 1
19 WA116066 PIN 1
20 WA116052 PIN 2
21 WA116497 RETAINER 2
22 WA116177 SPACER 4 1-1/4 - 2MM THICK
23 WA116178 SPACER 4 1-1/4 - 3MM THICK
24 WA102244 WASHER 2
25 WA102540 BOLT 2 M10 X 30
26 WA102302 BOLT 2
27 WA100426 WASHER 2
28 WA113413 WASHER 4
29 WA100924 WASHER 1 85 X 125 X 5
30 WA101547 SEALING WASHER 2 1/2 DOWTY (-08)
31 WA100674 O-RING 2 731-014N90-ORFS ID 0.488" X W 0.07" (-08)

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 20-31

PN=41
 20-32
MECHANICAL
STANDARD DELIMB ARMS
TX1057580 -UN-15JUN09

THIS PARTS LISTING IS CONTINUED

20-32 WARATAH HTH616C HARVESTER PC10314 (23-JUL-09)
PN=42
 20-33
MECHANICAL
STANDARD DELIMB ARMS

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

0 WA116760 ARM 1 R.H. CAST, (SUB FOR WA101418)

1 WA112035 BUSHING 2 2 1/4" X 2 3/4" X 4" NYOIL
2 WA101356 LUBRICATION FITTING 2 UNF 1/4" GREASE
3 WA114371 CUTTING EDGE 1 R.H.
4 WA112035 BUSHING 2 2 1/4" X 2 3/4" X 4" NYOIL
5 WA101356 LUBRICATION FITTING 2 UNF 1/4" GREASE
6 WA114372 CUTTING EDGE 1 L.H.
7 WA105700 BUSHING 2 37 X 44 X 32.6 BRONZE
8 WA101356 LUBRICATION FITTING 2 UNF 1/4" GREASE
9 WA116759 ARM 1 L.H. CAST, (SUB FOR WA100839)
10 WA106749 LINK 1

WARATAH HTH616C HARVESTER PC10314 (11-MAY-10) 20-33

PN=43
 20-34
MECHANICAL
DELIMB ARMS (CUT TO LENGTH)
TX1060479 -UN-15JUN09

THIS PARTS LISTING IS CONTINUED

20-34 WARATAH HTH616C HARVESTER PC10314 (23-JUL-09)
PN=44
 20-35
MECHANICAL
DELIMB ARMS (CUT TO LENGTH)

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

0 WA116352 ARM 1 R.H. FAB (CUT TO LENGTH)

1 WA112035 BUSHING 2 2 1/4" X 2 3/4" X 4" NYOIL
2 WA101356 LUBRICATION FITTING 2 UNF 1/4" GREASE
3 WA101169 CUTTING EDGE 1 R.H.
4 WA112035 BUSHING 2 2 1/4" X 2 3/4" X 4" NYOIL
5 WA101356 LUBRICATION FITTING 2 UNF 1/4" GREASE
6 WA103497 CUTTING EDGE 1 L.H.
7 WA105700 BUSHING 2 37 X 44 X 32.6 BRONZE
8 WA101356 LUBRICATION FITTING 2 UNF 1/4" GREASE
9 WA116353 ARM 1 L.H. FAB (CUT TO LENGTH)
10 WA106749 LINK 1

WARATAH HTH616C HARVESTER PC10314 (23-JUL-09) 20-35

PN=45
 20-36
MECHANICAL
MEASURING UNIT
TX1082618 -UN-

THIS PARTS LISTING IS CONTINUED

20-36 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=46
 20-37
MECHANICAL
MEASURING UNIT

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA106743 PIN 1 1" PIN

2 WA101356 LUBRICATION FITTING 2
3 WA107442 CAP 1
4 F351132 SEAL 1
5 WA101955 DRIVE SHAFT 1
6 WA100866 LOCK NUT 1
7 WA101253 WASHER 1
8 13P1016 BALL BEARING 2
9 WA107664 SPACER 1
10 WA107666 SPACER 1
11 WA101571 SEAL 1
12 WA101868 MEASURING WHEEL 1
13 WA107259 SPACER 1
14 WA107441 HUB 1
15 WA107503 ARM 1 LENGTH MEASURING
16 F350398 BUSHING 1
17 WA100648 CAP SCREW 2
18 WA102555 WASHER 2
19 WA103571 COVER 1
20 WA102076 BUSHING 1
21 19M3148 CAP SCREW 9 M10 X 40
22 WA101833 SCREW 2
23 19M3131 CAP SCREW 8 M8 X 25
24 F350413 WASHER 2
25 WA100426 WASHER 1
26 WA102302 BOLT 1
27 WA103344 THREADED NIPPLE 2 3/8 BSPPM - 9/16 JICM
28 WA106369 RETAINER 1 1" PIN
29 WA105024 PIN 1
30 F350413 SPACER 2
31 WA101038 NUT 1 M8
32 WA103517 SEALING WASHER 2 3/8 DOWTY (-06)

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 20-37

PN=47
 20-38
MECHANICAL
LENGTH MEASURING WHEELS
TX1061052 -UN-24JUN09

THIS PARTS LISTING IS CONTINUED

20-38 WARATAH HTH616C HARVESTER PC10314 (23-JUL-09)
PN=48
 20-39
MECHANICAL
LENGTH MEASURING WHEELS

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA101868 WHEEL 1 16MM STANDARD (OPTIONAL)

2 WA107259 SPACER 1
3 19M3148 CAP SCREW 8 M10 X 40 S/CAP
4 WA104049 MEASURING WHEEL 1 32MM DEBARKING (OPTIONAL)
5 19M3149 CAP SCREW 8 M10 X 45 S/CAP
6 WA109781 WHEEL 1 98MM DEBARKING AND MULTI-STEMMING (OPTIONAL)
7 19M3149 CAP SCREW 8 M10 X 45 S/CAP
8 WA109516 WHEEL 1 MEASURING, SERRATED (OPTIONAL)
9 WA107259 SPACER 1
10 19M3148 CAP SCREW 8 M10 X 40 S/CAP

WARATAH HTH616C HARVESTER PC10314 (23-JUL-09) 20-39

PN=49
 20-40
MECHANICAL
FEED UNIT - FIXED
TX1082619 -UN-

THIS PARTS LISTING IS CONTINUED

20-40 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=50
 20-41
MECHANICAL
FEED UNIT - FIXED

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA102979 O-RING 4 731-018N90-ORFS ID 0.739" X W 0.07" (-12)

2 F351045 FITTING 2 3/4 BSPPM COMPACT 90 DEGREE 1-3/16 ORFSM
3 WA102850 SEALING WASHER 4 3/4 DOWTY (-12)
4 WA101970 SCREW 8 M12 X 55
5 WA103100 FITTING 2 3/4 BSPPM - 1-3/16 ORFSM
6 WA116429 FITTING 2 3/8 BSPPM - 3/8 BSPPF EXT 52 MM
7 WA116431 ELBOW FITTING 2
8 WA102853 FITTING 2 1/4 BSPPM - 9/16 JICM
9 WA100740 SPACER 2
10 WA116069 MANIFOLD 1
11 WA101356 LUBRICATION FITTING 2
12 WA101112 HUB 1
13 WA116068 MANIFOLD 1
14 WA101539 O-RING 4
15 WA109641 HYDRAULIC MOTOR 2 400 OMV
WA101313 HYDRAULIC MOTOR 2 315 OMV
16 F034945 SCREW 8 M16 X 50
17 WA101139 SCREW 8
18 WA101270 FLANGE NUT 8
19 WA102641 SHIM 2 .127MM
20 WA100529 SHIM 2 .25MM
21 WA100033 SHIM 2 .5MM
22 WA101140 SEALING WASHER 2 1/4 DOWTY (-04)
23 WA103517 SEALING WASHER 4 3/8 DOWTY (-06)
24 WA118952 O-RING 4 731-012N90-ORFS ID 0.364" X W O.O7" (-06)

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 20-41

PN=51
 20-42
MECHANICAL
FEED UNIT ARMS
TX1082620 -UN-

THIS PARTS LISTING IS CONTINUED

20-42 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=52
 20-43
MECHANICAL
FEED UNIT ARMS

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA100820 CAP SCREW 2

2 WA102654 WASHER 2
3 WA116051 PIN 2 FEED UNIT
4 WA116160 PIN 2 FEED ARM LINK PIN
5 19M8607 CAP SCREW 4
6 WA102244 WASHER 4
7 WA106371 RETAINER 6
8 WA115959 PIN 2
9 WA116177 SPACER 8 1-1/4 X 2ML
10 WA116178 SPACER 8 1-1/4 X 3ML
11 WA116179 SPACER 8 1-1/4 X 4ML
12 WA113805 PIN 2
13 WA110311 LINK 1
14 F008646 BOLT 2
15 WA100426 WASHER 2
16 WA113719 FEED UNIT 1 L.H. FEED ARM (ANGLED)
WA113706 FEED UNIT 1 L.H. FEED ARM (STRAIGHT)
17 WA113716 FEED UNIT 1 R.H. FEED ARM (ANGLED)
WA113703 FEED UNIT 1 R.H. FEED ARM (STRAIGHT)
18 WA116351 LOCKING COLLAR 2
19 WA116497 LOCKING COLLAR 2
20 WA113179 WASHER 4
21 F351046 FITTING 2 1/2 BSPPM COMPACT 90 13/16 ORFSM
22 WA111185 FITTING 2 1/2 BSPPM - 13/16 ORFSM EXT 40 MM
23 F350425 WASHER 4 HARDENED STEEL
24 WA101547 SEALING WASHER 4 1/2 DOWTY (-08)
25 WA100674 O-RING 4 731-014N90-ORFS ID 0.488" X W 0.07" (-08)

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 20-43

PN=53
 20-44
MECHANICAL
FEED UNIT ARMS
TX1074122 -UN-18MAR10

THIS PARTS LISTING IS CONTINUED

20-44 WARATAH HTH616C HARVESTER PC10314 (11-MAY-10)
PN=54
 20-45
MECHANICAL
FEED UNIT ARMS

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA114457 BOLT 8 M12 X 25

2 WA102555 WASHER 8
3 WA113621 GUARD 1 RH STRAIGHT
WA113273 GUARD 1 RH ANGLED
4 WA101356 LUBRICATION FITTING 2
5 WA107631 BUSHING 2
6 WA103439 BOLT 2
7 WA101207 WASHER 2
8 WA102837 NUT 2 M6 NYLOC
9 WA100249 TIE ROD END 4
10 WA101886 NUT 4
11 WA103349 ROD 4
12 WA101259 LINK 1 -000017 (SUB WA117291) (ALSO ORDER WA117265)
WA117291 LINK 1 000018-
13 WA112035 BUSHING 4
14 WA101356 LUBRICATION FITTING 2
15 WA110311 LINK 1
16 WA113716 FEED UNIT 1 R.H. FEED ARM (ANGLED) COMPLETE
WA113703 FEED UNIT 1 R.H. FEED ARM (STRAIGHT) COMPLETE
17 WA113622 GUARD 1 L.H. STRAIGHT
WA113724 GUARD 1 L.H. ANGLED
18 WA113719 FEED UNIT 1 L.H. FEED ARM (ANGLED) COMPLETE
WA113706 FEED UNIT 1 L.H. FEED ARM (STRAIGHT) COMPLETE
19 WA101833 SET SCREW 1 M6 X 8
20 19M9281 SCREW 2 M6 X 35

WARATAH HTH616C HARVESTER PC10314 (11-MAY-10) 20-45

PN=55
 20-46
MECHANICAL
STRAIGHT FEED UNIT FEED ARM MOTORS
TX1082621 -UN-

THIS PARTS LISTING IS CONTINUED

20-46 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=56
 20-47
MECHANICAL
STRAIGHT FEED UNIT FEED ARM MOTORS

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA109648 MOTOR 2 630 TMVW (USED WITH WA109641 - 400OMV MOTOR)

WA109651 MOTOR 2 500 TMVW (USED WITH WA101313 - 315 OMV MOTOR)
2 WA111982 FITTING 4 1" BSPPM-1 3/16" ORFSM
3 WA102853 FITTING 2 1/4 BSPPM X 9/16 JICM
4 WA100064 ELBOW FITTING 1 1 3/16" ORFSM X 1-3/16 ORFSF 90 DEGREE
5 WA101140 SEALING WASHER 2 1/4 DOWTY (-04)
6 WA102143 SEALING WASHER 4 1 DOWTY (-16)
7 WA102979 O-RING 5 731-018N90-ORFS ID 0.739" X W 0.07" (-12)
8 19M8733 SCREW 16 M16 X 45
9 WA109726 STUD 12
10 WA109308 FLANGE NUT 12 M16

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 20-47

PN=57
 20-48
MECHANICAL
ANGLED FEED UNIT FEED ARM MOTORS
TX1082624 -UN-

THIS PARTS LISTING IS CONTINUED

20-48 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=58
 20-49
MECHANICAL
ANGLED FEED UNIT FEED ARM MOTORS

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA109648 MOTOR 2 630 TMVW (USED WITH WA109641 - 400OMV MOTOR)

WA109651 MOTOR 2 500 TMVW (USED WITH WA101313 - 315 OMV MOTOR)
2 WA116321 ADAPTER FITTING 1 1" BSPPM / 1" BSPPF
3 WA111982 FITTING 1 1" BSPPM - 1 3/16" ORFSM
4 WA102853 FITTING 1 1/4" BSPPM X 9/16 JICM
5 WA100064 ELBOW FITTING 1 1 3/16" ORFSM - 1-3/16 ORFSF-90 DEGREE
6 WA111985 ELBOW FITTING 2 1" BSPPM COMPACT 90 - 1-3/16 ORFSM
7 WA115019 ELBOW FITTING 1 1/4"BSPPM COMPACT 90 - 9/16 JICM
8 WA102143 SEALING WASHER 5 1 DOWTY (-16)
9 WA102979 O-RING 4 731-018N90-ORFS ID 0.739" X W 0.07" (-12)
10 WA101140 SEALING WASHER 2 1/4 DOWTY (-04)
11 19M8733 SCREW 16 M16 X 45
12 WA109726 STUD 12
13 WA109308 FLANGE NUT 12 M16

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 20-49

PN=59
 20-50
MECHANICAL
FEED WHEEL OPTIONS
TX1073233 -UN-18MAR10

THIS PARTS LISTING IS CONTINUED

20-50 WARATAH HTH616C HARVESTER PC10314 (11-MAY-10)
PN=60
 20-51
MECHANICAL
FEED WHEEL OPTIONS

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA112774 WHEEL 1 DEBARKING (WIDE WHEEL)

WA116415 WHEEL 1 DEBARKING (BATWING WHEEL)
2 WA112773 WHEEL 2 DEBARKING (FEED ARM WHEEL)
3 WA117435 WHEEL 1 THUMBNAIL (STANDARD WIDE WHEEL)
WA116415 WHEEL 1 DEBARKING (BATWING)
4 WA116229 WHEEL 1 L.H. FEED, THUMBNAIL
WA116304 WHEEL 1 R.H. FEED, THUMBNAIL

WARATAH HTH616C HARVESTER PC10314 (11-MAY-10) 20-51

PN=61
 20-52
MECHANICAL
LOWER DELIMBER ARM
TX1082625 -UN-

THIS PARTS LISTING IS CONTINUED

20-52 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=62
 20-53
MECHANICAL
LOWER DELIMBER ARM

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 F350429 WASHER 2
2 WA100426 WASHER 2
3 WA100820 BOLT 1
4 F003532 BOLT 2 M10 X 25, (SUB FOR WA102302)
5 WA102654 WASHER 1
6 WA106371 RETAINER 2
7 WA109297 PIN 1
8 WA110438 PIN 1
9 WA113665 DELIMBER 1
10 WA116053 PIN 1
11 WA116177 SPACER 4 1-1/4 X 2 ML
12 WA116178 SPACER 4 1-1/4 X 3 ML
13 WA116179 SPACER 4 1-1/4 X 4 ML
14 F008646 BOLT 1
15 WA100426 WASHER 1
16 WA116351 LOCKING COLLAR 1
17 WA116497 RETAINER 1
18 WA115777 FITTING 2 1/2 BSPPM - 11/16 ORFSM
19 WA102097 WASHER 2 1/8" DOWTY
20 F351059 BOLT 1 BANJO
21 WA117169 LINE 1 GREASE
22 WA101547 SEALING WASHER 2 1/2" DOWTY (-08)
23 WA118952 O-RING 2 731-012N90-ORFS ID 0.364" X W 0.07" (-06)

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 20-53

PN=63
 20-54
MECHANICAL
LOWER DELIMB BUSHES
TX1061687 -UN-17JUL09

THIS PARTS LISTING IS CONTINUED

20-54 WARATAH HTH616C HARVESTER PC10314 (17-JUL-09)
PN=64
 20-55
MECHANICAL
LOWER DELIMB BUSHES

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA101356 LUBRICATION FITTING 1 UNF 1/4" GREASE

2 WA113667 ARM 1 BUSHES
3 WA114349 BUSHING 2 NYLON
4 WA113665 DELIMBER 1

WARATAH HTH616C HARVESTER PC10314 (17-JUL-09) 20-55

PN=65
 30-2
CYLINDERS
TOP SAW CYLINDER
TX1058564 -UN-22APR09

THIS PARTS LISTING IS CONTINUED

30-2 WARATAH HTH616C HARVESTER PC10314 (17-JUL-09)
PN=66
 30-3
CYLINDERS
TOP SAW CYLINDER

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

0 WA109010 HYDRAULIC CYLINDER 1

1 WA109154 HYDRAULIC CYLINDER BARREL 1
2 WA109210 ROD 1
3 ........ BARREL 1
4 WA100661 SELF-ALIGNING BUSHING 2
5 F351031 LUBRICATION FITTING 1 UNF 1/4" GREASE
6 WA103443 SNAP RING 2 CIRCLIP
7 ........ ROD 1
8 WA109205 HYDR. CYLINDER ROD GUIDE 1
9 ........ SEAL 1 GLAND
10 WA109031 SEAL KIT 1
11 19M3148 CAP SCREW 1 M10 X 40 SHCS M16 X 50
12 ........ WASHER 1 HARDENED
13 ........ O-RING 1
14 ........ SEAL 1 ROD
15 ........ SEAL 1 ROD WIPER
16 WA109175 PISTON 1
17 WA100184 LUBRICATION FITTING 1 1/4" X 45 DEGREE

WARATAH HTH616C HARVESTER PC10314 (17-JUL-09) 30-3

PN=67
 30-4
CYLINDERS
UPPER DELIMB CYLINDER
TX1060148 -UN-11JUN09

THIS PARTS LISTING IS CONTINUED

30-4 WARATAH HTH616C HARVESTER PC10314 (17-JUL-09)
PN=68
 30-5
CYLINDERS
UPPER DELIMB CYLINDER

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA113686 HYDRAULIC CYLINDER 1

2 19M8123 SCREW 2 M8 X 45
3 WA116639 MANIFOLD 1
4 WA102195 BUSHING 2
5 F351031 LUBRICATION FITTING 2
6 WA113688 ROD 1
7 WA116644 SEAL KIT 1
8 WA109207 HYDR. CYLINDER ROD GUIDE 1
9 WA109177 PISTON 1
10 ........ SEAL 1
11 F034945 CAP SCREW 1
12 WA102580 WASHER 1
13 ........ O-RING 1
14 ........ SEAL 1
15 ........ SEAL 1
16 ........ SEAL 1
17 WA113687 HYDRAULIC CYLINDER BARREL 1

WARATAH HTH616C HARVESTER PC10314 (17-JUL-09) 30-5

PN=69
 30-6
CYLINDERS
MEASURING CYLINDER
TX1058953 -UN-07JUL09

THIS PARTS LISTING IS CONTINUED

30-6 WARATAH HTH616C HARVESTER PC10314 (17-JUL-09)
PN=70
 30-7
CYLINDERS
MEASURING CYLINDER

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

0 WA109014 HYDRAULIC CYLINDER 1 MEASURING

1 WA109158 HYDRAULIC CYLINDER BARREL 1
2 WA109214 ROD 1
3 ........ BARREL 1
4 WA102195 BUSHING 2
5 WA101097 SNAP RING 2
6 F351031 LUBRICATION FITTING 2 UNF 1/4" GREASE NIPPLE
7 ........ ROD 1
8 WA109206 HYDR. CYLINDER ROD GUIDE 1
9 WA109176 PISTON 1
10 ........ SEAL 1 PISTON
11 ........ BOLT 1 SHCS M16 X 50
12 ........ WASHER 1 M16 HARDENED
13 ........ O-RING 1 AND BACK-UP
14 ........ SEAL 1 SINGLE ACTING ROD
15 ........ SEAL 1 ROD WIPER
16 WA109032 SEAL KIT 1 KIT

WARATAH HTH616C HARVESTER PC10314 (17-JUL-09) 30-7

PN=71
 30-8
CYLINDERS
FEED ARM CYLINDER
TX1058146 -UN-22APR09

THIS PARTS LISTING IS CONTINUED

30-8 WARATAH HTH616C HARVESTER PC10314 (17-JUL-09)
PN=72
 30-9
CYLINDERS
FEED ARM CYLINDER

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

0 WA113689 HYDRAULIC CYLINDER 1 FEED ARM

1 WA113690 HYDRAULIC CYLINDER BARREL 1 ASSEMBLY
2 WA113691 ROD 1 ASSEMBLY
3 ........ BARREL 1
4 WA102195 BUSHING 2
5 F351031 LUBRICATION FITTING 2 UNF 1/4" GREASE
6 ........ ROD 1
7 WA109207 HYDR. CYLINDER ROD GUIDE 1
8 WA109177 PISTON 1
9 ........ SEAL 1 PISTON
10 WA116644 SEAL KIT 1
11 ........ BOLT 1 SHCS M16 X 50
12 ........ WASHER 1 M16 HARDENED
13 ........ O-RING 1
14 ........ SEAL 1 SINGLE ACTING
15 ........ SEAL 1 WIPER

WARATAH HTH616C HARVESTER PC10314 (17-JUL-09) 30-9

PN=73
 30-10
CYLINDERS
TILT FRAME CYLINDER
TX1058987 -UN-28MAY09

THIS PARTS LISTING IS CONTINUED

30-10 WARATAH HTH616C HARVESTER PC10314 (17-JUL-09)
PN=74
 30-11
CYLINDERS
TILT FRAME CYLINDER

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

0 WA116545 HYDRAULIC CYLINDER 1 TILT FRAME

1 WA109162 HYDRAULIC CYLINDER BARREL 1
2 WA109218 ROD 1
3 ........ BARREL 1
4 WA109552 BUSHING 2
5 WA109551 SNAP RING 2
6 F351031 LUBRICATION FITTING 2 UNF 1/4" GREASE NIPPLE
7 ........ ROD 1
8 WA109207 HYDR. CYLINDER ROD GUIDE 1
9 WA109177 PISTON 1
10 ........ SEAL 1 PISTON
11 F034945 CAP SCREW 1 SHCS M16 X 50
12 WA102580 WASHER 1 M16 HARDENED
13 ........ O-RING 1 AND BACK-UP
14 ........ SEAL 1 SINGLE ACTING ROD
15 ........ SEAL 1 ROD WIPER
16 WA116644 SEAL KIT 1
17 WA116546 GUARD 1 CYLINDER
18 WA101651 WASHER 2
19 WA100648 BOLT 2

WARATAH HTH616C HARVESTER PC10314 (17-JUL-09) 30-11

PN=75
 30-12
CYLINDERS
LOWER DELIMB CYLINDER
TX1058990 -UN-06MAY09

THIS PARTS LISTING IS CONTINUED

30-12 WARATAH HTH616C HARVESTER PC10314 (17-JUL-09)
PN=76
 30-13
CYLINDERS
LOWER DELIMB CYLINDER

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

0 WA116280 HYDRAULIC CYLINDER 1 LOWER DELIMB

1 WA116285 HYDRAULIC CYLINDER BARREL 1
2 WA116283 ROD 1
3 ........ BARREL 1
4 WA102195 BUSHING 2
5 F351031 LUBRICATION FITTING 2 UNF 1/4" GREASE NIPPLE
6 ........ ROD 1
7 WA116644 SEAL KIT 1
8 WA109207 HYDR. CYLINDER ROD GUIDE 1
9 WA109177 PISTON 1
10 ........ SEAL 1 PISTON
11 ........ BOLT 1 SHCS M16 X 50
12 ........ WASHER 1 M16 HARDENED
13 ........ O-RING 1 AND BACK-UP
14 ........ SEAL 1 SINGLE ACTING ROD
15 ........ SEAL 1 ROD WIPER

WARATAH HTH616C HARVESTER PC10314 (17-JUL-09) 30-13

PN=77
 30-14
CYLINDERS
MAIN 3/4 SAW CYLINDER
TX1058750 -UN-29APR09

THIS PARTS LISTING IS CONTINUED

30-14 WARATAH HTH616C HARVESTER PC10314 (17-JUL-09)
PN=78
 30-15
CYLINDERS
MAIN 3/4 SAW CYLINDER

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

0 WA115656 HYDRAULIC CYLINDER 1 MAIN SAW, 2"

1 WA115661 HYDRAULIC CYLINDER BARREL 1
2 WA109212 ROD 1
3 ........ BARREL 1
4 WA101108 BUSHING 2
5 WA101097 SNAP RING 2
6 F351031 LUBRICATION FITTING 2 UNF 1/4" GREASE NIPPLE
7 ........ ROD 1
8 WA109206 HYDR. CYLINDER ROD GUIDE 1
9 WA109176 PISTON 1
10 ........ SEAL 1 PISTON
11 ........ BOLT 1 SHCS M16 X 50
12 ........ WASHER 1 M16 HARDENED
13 ........ O-RING 1 AND BACK-UP
14 ........ SEAL 1 SINGLE ACTING ROD
15 ........ SEAL 1 ROD WIPER
16 WA109032 SEAL KIT 1

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 30-15

PN=79
 40-2
SAW
TOP SAW
TX1082626 -UN-

THIS PARTS LISTING IS CONTINUED

40-2 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=80
 40-3
SAW
TOP SAW

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA101835 ADAPTER 1 3/8 BSPPM - 7/16 JICM

2 WA103344 THREADED NIPPLE 1 3/8" BSPPM X 9/16" JICM
3 WA106245 SAW UNIT 1 TOP SAW
4 WA102850 WASHER 3 3/8" DOWTY (-12)
5 WA100424 GUIDE BAR 1
6 WA103822 SAW CHAIN 1 404 (0.080") 55 LINKS
7 F351049 ELBOW FITTING 1 1/8 BSPTM - 7/16 JICM 90 DEGREE
8 WA100184 LUBRICATION FITTING 1
9 F351031 LUBRICATION FITTING 1
10 WA116814 FLOW CONTROL HYD. VALVE 1 90/120L
11 WA102600 THREADED NIPPLE 2 3/4 BSPPM - 1" ORFSM
12 WA103344 THREADED NIPPLE 1 3/8 BSPPM - 9/16 JICM
13 WA103517 WASHER 3 3/8" DOWTY (-06)
14 WA103217 O-RING 2 731-016N90-ORFS ID 0.614" X W 0.07" (-10)
15 WA102097 SEALING WASHER 2 1/8" DOWTY (-02)

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 40-3

PN=81
 40-4
SAW
TOP SAW ASSEMBLY
TX1073661 -UN-18MAR10

THIS PARTS LISTING IS CONTINUED

40-4 WARATAH HTH616C HARVESTER PC10314 (11-MAY-10)
PN=82
 40-5
SAW
TOP SAW ASSEMBLY

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA100221 BOLT 2 UNC 1/2" X 1 1/4", G8

2 WA102555 WASHER 2 1/2", DISC LOCK
3 WA100491 HYDRAULIC MOTOR 1
WA103595 SEAL KIT 1
4 WA110699 BASE 1
5 F350340 ADJUSTER 1
6 WA101307 BOLT 1 UNC 1/4" X 2 1/2", G8
7 WA100569 SNAP RING 1
8 WA100538 BEARING 1
9 WA105062 SNAP RING 1
10 WA104783 ARM 1
11 WA102555 WASHER 3
12 F350315 RETAINER 2
13 WA102244 WASHER 2 3/8", DISC LOCK
14 WA100928 BOLT 2 UNC 3/8" X 1 1/4", G8
15 F350347 PLATE 1 SLIDE
16 F350348 PLATE 1 CLAMP
17 F350341 STUD 1
18 F350284 STUD 1 UNF 3/8" X 45MM
19 WA102964 WASHER 3 3/8" HARDENED
20 F351019 NUT 1 UNF 3/8" NYLOC, G8
21 WA102580 WASHER 1 5/8" HARDENED
22 F351020 NUT 1 UNF 5/8" NYLOC, G8
23 WA100648 BOLT 3 12MM X 25
24 WA102555 WASHER 3 UNC 1/2 X 1-3/4
25 WA102822 BOLT 3

WARATAH HTH616C HARVESTER PC10314 (17-JUL-09) 40-5

PN=83
 40-6
SAW
TOP SAW SPROCKET KIT
TX1058771 -UN-24APR09

THIS PARTS LISTING IS CONTINUED

40-6 WARATAH HTH616C HARVESTER PC10314 (17-JUL-09)
PN=84
 40-7
SAW
TOP SAW SPROCKET KIT

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA106621 SPACER 1
2 WA106622 SHIM AR 0.5MM
WA106623 SHIM AR 1.0MM
WA106624 SHIM AR 0.25MM
3 WA106625 DRIVE SPROCKET 1
4 F351037 DOWEL PIN 2
5 F350315 RETAINER 1
6 WA100213 WASHER 1 1/4" DISC LOCK
7 WA103439 BOLT 1 M6 X 25 C10.9
8 WA106626 KIT 1 SPROCKET

WARATAH HTH616C HARVESTER PC10314 (17-JUL-09) 40-7

PN=85
 40-8
SAW
TOP SAW MOTOR SEAL KIT
TX1058862 -UN-30APR09

THIS PARTS LISTING IS CONTINUED

40-8 WARATAH HTH616C HARVESTER PC10314 (17-JUL-09)
PN=86
 40-9
SAW
TOP SAW MOTOR SEAL KIT

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA100589 KEY 1
2 ........ O-RING 2 19.4, 2.1 N 90
3 ........ O-RING 1 69, 2 N 70
4 ........ O-RING 1 78, 2 N 70
5 ........ SEAL 1 SHAFT
6 ........ BACK-UP RING 1
7 WA103595 SEAL KIT 1

WARATAH HTH616C HARVESTER PC10314 (17-JUL-09) 40-9

PN=87
 40-10
SAW
SUPER CUT 100 SAW UNIT
TX1073842 -UN-23MAR10

THIS PARTS LISTING IS CONTINUED

40-10 WARATAH HTH616C HARVESTER PC10314 (11-MAY-10)
PN=88
 40-11
SAW
SUPER CUT 100 SAW UNIT

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA109290 GUARD 1
2 WA106742 MANIFOLD 1
3 WA113680 SAW UNIT 1
4 WA106243 ADAPTER 1 SAW MOUNT
5 WA102398 WASHER 7 7/16" DISC LOCK
6 WA101458 BOLT 2 UNC 7/16" X 1 1/4" G8
7 WA101716 BOLT 5 UNC 7/16" X 1
8 WA102499 CAP SCREW 9 M10 X 30
9 WA102499 BOLT 4 UNC 1/2" X 1"
10 WA102555 LOCK WASHER 8 1/2" DISK LOCK
11 WA106532 GUARD 1
12 WA114457 BOLT 2 M12 X 35
13 WA117752 GUARD 1
14 19M3205 CAP SCREW 2 M12 X 30

WARATAH HTH616C HARVESTER PC10314 (11-MAY-10) 40-11

PN=89
 40-12
SAW
SUPER CUT 100 SAW ASSEMBLY
TX1082627 -UN-

THIS PARTS LISTING IS CONTINUED

40-12 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=90
 40-13
SAW
SUPER CUT 100 SAW ASSEMBLY

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 F0574262 SCREW 4
2 F059548 HYDRAULIC MOTOR 1
3 F057754 CONTROL 1
4 F056034 HOUSING 1
5 WA100576 SAW CHAIN 1 87 LINKS
6 WA114819 BAR 1 75 CM JETFIT
7 F062711 HOLDER 1 BAR NO. 7
8 F056023 ADJUSTER 1
9 WA108437 GUARD 1
10 F010829 CAP SCREW 3 M8 X 40 MM (12.9)
11 WA101141 ELBOW FITTING 2 9/16 JICM X 9/16 JICM - 90 DEGREE
12 WA103344 THREADED NIPPLE 1 3/8 BSPPM - 9/16 JICM
13 WA102853 THREADED NIPPLE 1
14 WA115019 ELBOW FITTING 1 1/4 BSPPM COMPACT 90 9/16 JICM
15 WA103100 THREADED NIPPLE 2 1-3/16 ORFSM X 3/4 BSPPM
16 WA103344 THREADED NIPPLE 1 3/8 BSPPM X 9/16 JICM
17 F351044 ELBOW FITTING 1 3/8 BSPPM X 9/16 JICM
18 WA103517 SEALING WASHER 3 3/8" DOWTY (-06)
19 WA102850 SEALING WASHER 2 3/4" DOWTY (-12)
20 WA102979 O-RING 2 731-018N90-ORFS ID 0.739" X W 0.07" (-12)
21 WA101140 SEALING WASHER 1 1/4" DOWTY (-04)

THIS PARTS LISTING IS CONTINUED

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 40-13
PN=91
 40-14
SAW
SUPERCUT 100 SAW ASSEMBLY (MAIN HOUSING)
TX1059703 -UN-22MAY09

THIS PARTS LISTING IS CONTINUED

40-14 WARATAH HTH616C HARVESTER PC10314 (17-JUL-09)
PN=92
 40-15
SAW
SUPERCUT 100 SAW ASSEMBLY (MAIN HOUSING)

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 F063884 ELBOW FITTING 1

2 F022700 PLUG 1 M10 X 1
3 WA108472 NUT 1 BSPP NO. 8
4 WA110266 FITTING 1 M12 X 1.5 (GLAND)
5 F018811 SCREW 3 M6 X 90 MM (12.9)
6 F057755 COVER 1
7 F022641 PLUG 2 BSPT 3/8"
8 F067194 HOUSING 1
9 F056039 DOWEL PIN 2 CP 5 X 6
10 F056031 PLUG 1 95◦ FEED OUT
11 F056034 BRACKET 1 SAW STAND
12 F056033 SEAL 3 SWIVEL KIT
13 F056032 GEAR 1 DRIVE (WITH BEARING)
14 F061582 WASHER 1
15 F057427 SCREW 1 MLC6S 06 X 12 MM (12.9) (SOCKET HEAD)
16 F434977 WHEEL 1 (LOGRITE CONTROLLER) 12Z/12
F057432 WHEEL 1 (TIMBERMATIC CONTROLLER) (OPTIONAL) 24Z/24
17 F056048 SCREW 8 M8 X 14 MM (12.9) (SOCKET HEAD)
18 F057433 WASHER 1 (LEFT HAND)
19 F056049 CAP SCREW 9 M6 X 08 MM (12.9) (SOCKET HEAD)
20 F026743 SPRING PIN 2 8 X 14
21 F011293 PLUG 1 VSTI 1/8"
22 F056009 ROD 1 PISTON (95◦ FEED OUT)
23 F056012 SEAL 1 PISTON ROD (KIT)
24 F056045 O-RING 1 40.6 X 2.4 MM, KIT
25 F056011 CAP 1
26 F056016 PISTON 1
27 F056013 SEAL 1 KIT
28 F056014 RING 1 GUIDE (KIT)
29 F013913 O-RING 1 21.5 X 2.4 MM, KIT
30 F057431 SPACER 1 ONLY ON 95◦ FEED OUT
31 F056005 FLANGE 1 CONTACT
32 F057434 SEAL 1 RING (KIT)
33 F056007 HYDRAULIC CYLINDER BARREL 1 40MM DIAMETER, 95◦ FEED OUT
34 F056050 SCREW 4 M8 X 260 MM (12.9), 95◦ FEED OUT, (SOCKET
HEAD)

THIS PARTS LISTING IS CONTINUED

WARATAH HTH616C HARVESTER PC10314 (17-JUL-09) 40-15
PN=93
 40-16
SAW
SUPER CUT 100 LUBRICATION PUMP
TX1059607 -UN-01JUL09

THIS PARTS LISTING IS CONTINUED

40-16 WARATAH HTH616C HARVESTER PC10314 (17-JUL-09)
PN=94
 40-17
SAW
SUPER CUT 100 LUBRICATION PUMP

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 F057431 MANIFOLD 1 STRAINER, ASSY.

2 F056005 MANIFOLD 1
3 F061682 HOUSING 1
4 F056050 BOLT 1 M8 X 260MM (12.9) SOCKET HEAD CAP, 95 DEGREE
FEED OUT
5 F056007 HOUSING 1
6 F010726 SCREW 1 M5 X 25 12.9 SOCKET HEAD CAP
7 F058841 CHECK VALVE 1
8 F062514 BUSHING 1
9 F058845 O-RING 1 10 X 3
10 F058843 FITTING 1 GLAND
11 F058848 O-RING KIT 1 9.3 X 2.4
12 F061680 OIL LINE 1 2.5ML 95 DEGREE FEED OUT
F062219 OIL LINE 1 1.6 ML
F062513 OIL LINE 1 3.5 ML
F062515 OIL LINE 1 3.5 ML, EUROPEAN OPTION
13 F056046 O-RING 1 34.5 X 2.4
14 F056004 MANIFOLD 1
15 F058839 MANIFOLD 1 STRAINER ASSEMBLY
16 F058847 SCREW 1 MP6SS 4 X 5 ALLEN SET
17 F005634 O-RING 1 19.2 X 3.0
18 F114468 O-RING 1 2.9 X 1.78
19 F058849 CHECK VALVE 1 RC1
20 F008355 STRAINER 1
21 F058850 SPRING 1 COMPRESSION
22 F005170 SEAL 1 BONDED BSP 3/4"
23 F058851 THREADED NIPPLE 1

WARATAH HTH616C HARVESTER PC10314 (11-MAY-10) 40-17

PN=95
 40-18
SAW
SUPERCUT 100 SAW ASSEMBLY (BAR HOLDER)
TX1059704 -UN-26MAY09

THIS PARTS LISTING IS CONTINUED

40-18 WARATAH HTH616C HARVESTER PC10314 (17-JUL-09)
PN=96
 40-19
SAW
SUPERCUT 100 SAW ASSEMBLY (BAR HOLDER)

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 F056015 SCREW 2 GUIDE

2 F062711 HOLDER 1 BAR, NO. 7
3 F056051 SET SCREW 2 MP6SS 10 X 10 MM, (ALLEN SET)
4 F062656 SCREW 2 GUIDE
5 F056020 PISTON 1
6 F004573 O-RING 1 11.3 X 2.4 MM, KIT
7 F057430 SPRING 1 COMPRESSION
8 F056018 PISTON 1
9 F004568 O-RING 2 15.3 X 2.4 MM, KIT
10 F056044 O-RING 2 4.76 X 1.78 MM, KIT
11 F056023 BRACKET 1 TENSIONING DEVICE
12 F010829 CAP SCREW 8 M8 X 40 MM (12.9) (SOCKET HEAD)
13 F052837 SCREW 2 M8 X 45 MM (12.9) (SOCKET HEAD)
14 F057429 SPRING 1 COMPRESSION
15 F434971 GUIDE 1 PILOT VALVE
16 F056047 CAP SCREW 2 M6 X 10 MM
17 F062033 CHECK VALVE 1
18 F056024 SCREW 1 BLEEDER
19 F056021 BUSHING 1
20 F056022 PIN FASTENER 1
21 F056019 SPRING 1 COMPRESSION

THIS PARTS LISTING IS CONTINUED

WARATAH HTH616C HARVESTER PC10314 (11-MAY-10) 40-19
PN=97
 40-20
SAW
SUPER CUT 100 SPROCKET AND MOTOR SEALS
TX1062669 -UN-02SEP09

THIS PARTS LISTING IS CONTINUED

40-20 WARATAH HTH616C HARVESTER PC10314 (11-MAY-10)
PN=98
 40-21
SAW
SUPER CUT 100 SPROCKET AND MOTOR SEALS

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 F061583 WEDGE 1 8 X 7X 40
2 F003230 SEAL 1 SHAFT
3 F035014 BACK-UP RING 1
4 F003372 SNAP RING 1 SGH 52
5 WA103594 SEAL KIT 1
6 F058983 WASHER 1 F11-19
7 WA103415 SPACER AR 0.25MM
F034301 SPACER AR 0.50MM
F034302 SPACER AR 1.00MM
8 F046098 CHAIN SPROCKET 1 12 TOOTH
9 F061584 CATCH 1 F11-19
10 19M7164 CAP SCREW 1 M8 X 50
11 WA100426 WASHER 1 5/16, DISC LOCK
12 WA113907 KIT 1

WARATAH HTH616C HARVESTER PC10314 (17-JUL-09) 40-21

PN=99
 40-22
SAW
SUPER CUT 100 LUBRICATION MANIFOLD NON TOP SAW
TX1059083 -UN-10JUL09

THIS PARTS LISTING IS CONTINUED

40-22 WARATAH HTH616C HARVESTER PC10314 (17-JUL-09)
PN=100
 40-23
SAW
SUPER CUT 100 LUBRICATION MANIFOLD NON TOP SAW

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 F350510 MANIFOLD 1
2 WA103579 BOLT 4 M6 X 40 S/CAP
3 WA103149 GASKET 1
4 WA103543 STRAINER 1
5 WA100213 WASHER 4 1/4", DISC LOCK
6 WA106742 OILER 1
7 WA103344 THREADED NIPPLE 1 3/8 - 9/16 JIC

WARATAH HTH616C HARVESTER PC10314 (17-JUL-09) 40-23

PN=101
 40-24
SAW
SUPER CUT 100 LUBRICATION MANIFOLD WITH TOPPING SAW
TX1082628 -UN-

THIS PARTS LISTING IS CONTINUED

40-24 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=102
 40-25
SAW
SUPER CUT 100 LUBRICATION MANIFOLD WITH TOPPING SAW

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA113097 MANIFOLD 1
2 WA113096 SCREW 4 M6 X 65
3 WA103149 GASKET 1
4 WA113094 MANIFOLD 1
5 WA101639 OILER 1
6 WA102254 ELBOW FITTING 2 1/4 BSPPM COMPACT 90 - 7/16 JICM
7 WA103344 THREADED NIPPLE 1 3/8" BSPPM X 9/16" JICM
8 WA101140 SEALING WASHER 2 1/4" DOWTY (-04)
9 WA103517 SEALING WASHER 1 3/8" DOWTY (-06)
10 WA113095 OILER 1 (ASSEMBLY)

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 40-25

PN=103
 40-26
SAW
3/4" SAW UNIT
TX1082629 -UN-

THIS PARTS LISTING IS CONTINUED

40-26 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=104
 40-27
SAW
3/4" SAW UNIT

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA101141 ELBOW FITTING 1 9/16" JICM X 9/16" JICF 90 DEGREE

2 WA103474 BOLT 2 UNC 3/8" X 1" G8
3 WA102244 WASHER 2 3/8" DISC LOCK
4 F350282 RETAINER 2 13/32" X 1 1/4" X 5MM
5 F014904 BOLT 3 M12 X 55MM
6 WA112319 BRACKET 1 MOUNTING
7 WA100044 WASHER 3 1/2" HARDENED
8 WA103101 NUT 3 M12 CL10.9 NYLOC
9 WA116269 BAR 1 29 INCHES
10 WA116339 SAW CHAIN 1 47 LINKS
11 WA114457 BOLT 2 M12 X 35
12 WA102555 WASHER 5
13 WA109290 GUARD 1
14 WA102499 BOLT 3 1/2 X 1" UNC
15 WA106573 GUARD 1
16 WA103344 THREADED NIPPLE 1 3/8" BSPPM X 9/16" JICM
17 WA103517 SEALING WASHER 2 3/8" DOWTY (-06)

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 40-27

PN=105
 40-28
SAW
3/4" MAIN SAW UNIT ASSEMBLY
TX1082630 -UN-

THIS PARTS LISTING IS CONTINUED

40-28 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=106
 40-29
SAW
3/4" MAIN SAW UNIT ASSEMBLY

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA101959 BOLT 18 UNF 5/16" X 1" S/CAP

2 WA109147 RETAINER 1
3 WA108463 BOLT 3 UNF 5/16" X 1 3/4" S/CAP
4 WA108441 GUARD 1
5 WA115658 ARM 1
6 F350606 SEAL 1 8 X 4 X 600, FELT
7 WA102933 BEARING 1
8 WA106125 ADAPTER 1
9 F351031 LUBRICATION FITTING 1 UNF 1/4", GREASE
10 WA100603 O-RING 1 182 X 2.5 N70
11 WA102872 RING 1
12 WA106146 ADAPTER 1
13 WA100426 WASHER 8 5/16", DISC LOCK
14 WA102464 BOLT 8 UNF 5/16" X 1 1/2", G8
15 WA103169 HYDRAULIC MOTOR 1
16 WA102555 LOCK WASHER 4 1/2" DISC LOCK
17 WA103072 BOLT 4 UNF 1/2" X 1 1/2"
18 WA102097 WASHER 2 1/8" DOWTY (-02)
19 F351059 FITTING 1 1/8" BANJO
20 WA108477 FLANGE FITTING 4 INCLUDES KEY 21 BOLTS
21 ........ SCREW 1
22 F350806 SEALING WASHER 1 M18 DOWTY
23 WA101121 THREADED NIPPLE 1 18MM X 9/16 JICM
24 WA101141 ELBOW FITTING 1 -XXXXX 9/16 JICM -X 9/16 JICF 90 DEGREE
.. WA100772 SEAL KIT 1 A2FM45 SHAFT SEAL

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 40-29

PN=107
 40-30
SAW
3/4"SAW UNIT SLIDER
TX1058819 -UN-28APR09

THIS PARTS LISTING IS CONTINUED

40-30 WARATAH HTH616C HARVESTER PC10314 (17-JUL-09)
PN=108
 40-31
SAW
3/4" SAW UNIT SLIDER

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA103305 NUT 2 UNC 5/8" G8

2 WA102580 WASHER 2 5/8" HARDENED
3 WA112935 STUD 2 5/8" UNC X 58 MM
4 WA112936 ADJUSTER 1
5 WA112934 ADJUSTER KIT 1
6 WA101353 PLATE 1
7 WA112937 CLAMP 1
8 WA103505 BOLT 1

WARATAH HTH616C HARVESTER PC10314 (17-JUL-09) 40-31

PN=109
 40-32
SAW
3/4" SAW UNIT SPROCKET AND MOTOR SEAL KIT
TX1059597 -UN-19MAY09

THIS PARTS LISTING IS CONTINUED

40-32 WARATAH HTH616C HARVESTER PC10314 (17-JUL-09)
PN=110
 40-33
SAW
3/4" SAW UNIT SPROCKET AND MOTOR SEAL KIT

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 ........ O-RING 1
2 ........ O-RING 1
3 ........ O-RING 1
4 ........ SEAL 1 SHAFT
5 WA100499 SEAL KIT 1
6 WA104708 HUB 1 BOSS
7 WA102945 SHIM 1 1.0MM
8 WA102936 SHIM 1 0.25MM
9 WA103407 SHIM 1 0.5MM
10 WA103826 CHAIN SPROCKET 1 10 TOOTH RIM 3/4" PITCH
11 F351038 PIN 2 6MM X 30MM DOWEL
12 WA109296 RETAINER 1 MANIFOLD - 30MM SHAFT
13 WA103026 LOCK PLATE 1
14 F014904 BOLT 1 M12 X 55
15 WA110785 KIT 1 10 TOOTH SPROCKET

WARATAH HTH616C HARVESTER PC10314 (17-JUL-09) 40-33

PN=111
 40-34
SAW
3/4" SAW UNIT OIL PUMP
TX1082631 -UN-

THIS PARTS LISTING IS CONTINUED

40-34 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=112
 40-35
SAW
3/4" SAW UNIT OIL PUMP

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA100714 FITTING 1
2 WA102815 SPRING 1
3 WA103470 PISTON 1
4 WA100138 BACK-UP RING 1
5 WA102059 O-RING 1 9.3 X 2.4
6 WA101140 SEALING WASHER 4 1/4" DOWTY (-04)
7 WA102403 SCREW 4 M6 X 30 CL10.9 S/CAP
8 WA101639 HOUSING 1
9 WA102583 FITTING 1
10 WA103543 STRAINER 1
11 WA103149 GASKET 1
12 WA101639 OILER AR
13 WA102254 ELBOW FITTING 2 1/4 BSPPM COMPACT 90 - 7/16 JICM

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 40-35

PN=113
 50-2
ELECTRICAL
HEAD MODULE BOX (TIMBERRITE CONTROLLER)
TX1074117 -UN-18MAR10

THIS PARTS LISTING IS CONTINUED

50-2 WARATAH HTH616C HARVESTER PC10314 (11-MAY-10)
PN=114
 50-3
ELECTRICAL
HEAD MODULE BOX (TIMBERRITE CONTROLLER)

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA116314 GUARD 1
2 WA113967 SCREW 4 -000017 M8 X 20 C10.9
19M9681 CAP SCREW 4 000018- M8 X 16 HEX HEAD
3 WA100426 WASHER 4 5/16" DISC LOCK
4 WA110728 CABLE 1 POWER LOOM
5 WA102832 BOLT 3 M12 X 40 CL10.9
6 WA102555 WASHER 3 1/2" DISC LOCK
7 WA102417 ISOLATOR 3
8 F350061 ISOLATOR 6
9 WA102556 CONNECTOR 1
10 WA114826 PLATE 1
11 WA100838 CABLE AR 3 CORE 0.75-PER/MTR 4M
12 WA101173 PLUG 1 BLACK CAP
WA101754 PLUG 1 GREY CAP
13 F055286 CONNECTOR 1 WIRING CONNECTOR (C)
14 F055284 CONNECTOR 1 WIRING CONNECTOR (A)
15 F055290 PIN AR
16 F057306 PLUG AR
17 F053688 CONNECTOR 1
18 WA101977 PIN 6
19 F053689 LOCK 1
20 F052693 PLUG 1
21 WA106895 CONNECTOR 1 HHM CONNECTOR ASSEMBLY KIT
22 F073212 ELECTRICAL EQUIPMENT 1 HEAD MODULE
23 WA110581 BRACKET 2
24 WA113967 BOLT 4 M8 X 20 C10.9, (SUB FOR WA102302)
25 WA100426 LOCK WASHER 4 5/16" DISC LOCK
26 WA102525 WASHER 4
27 F055285 CONNECTOR 1 WIRING CONNECTOR (B)
28 F055287 CONNECTOR 1 WIRING CONNECTOR (D)
29 WA110692 CONNECTOR 1

WARATAH HTH616C HARVESTER PC10314 (11-MAY-10) 50-3

PN=115
 50-4
ELECTRICAL
HEAD MODULE BOX MOUNTING (TIMBERMATIC T10 CONTROLLER)
TX1075692 -UN-06APR10

THIS PARTS LISTING IS CONTINUED

50-4 WARATAH HTH616C HARVESTER PC10314 (11-MAY-10)
PN=116
 50-5
ELECTRICAL
HEAD MODULE BOX MOUNTING (TIMBERMATIC T10 CONTROLLER)

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA110739 BOX 1
2 F351137 SEAL 1
3 WA100425 COVER 1
4 WA102579 SEAL 6 4 X 6 MM
5 WA101912 SCREW 4
6 F0284036 BOLT 4 M6 X 35
7 WA105462 O-RING 4
8 WA102832 BOLT 3 M12 X 40
9 WA102555 WASHER 3 1/2" DISC LOCK
10 WA102417 ISOLATOR 3
11 F350061 ISOLATOR 6
12 WA114826 PLATE 1
13 WA102837 NUT 4 M6 - NYLOC
14 WA102571 PLUG 4

WARATAH HTH616C HARVESTER PC10314 (11-MAY-10) 50-5

PN=117
 50-6
ELECTRICAL
HEAD MODULE BOX MOUNTING (TR100 CONTROLLER)
TX1080299 -UN-

THIS PARTS LISTING IS CONTINUED

50-6 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=118
 50-7
ELECTRICAL
HEAD MODULE BOX MOUNTING (TR100 CONTROLLER)

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 F065193 MODULE 1 HARVESTER HEAD

2 WA100426 WASHER 6 5/16" LOCK
3 WA102525 WASHER 6 5/16"
4 WA105122 SCREW 2 DIN 931 M8 X 50 - 8.8 A3A
5 WA113967 SCREW 4 M8 X 20
6 WA118406 PLATE 1 MOUNTING

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 50-7

PN=119
 50-8
ELECTRICAL
HEAD MODULE BOX (TIMBERMATIC T10 CONTROLLER)
TX1075236 -UN-12APR10

THIS PARTS LISTING IS CONTINUED

50-8 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=120
 50-9
ELECTRICAL
HEAD MODULE BOX (TIMBERMATIC T10 CONTROLLER)

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA102175 ELEC. CONNECTOR TERMINAL 6 2 CONDUCTOR PLATE

2 WA102278 PLATE 1 3 CONDUCTOR
3 WA101263 ELEC. CONNECTOR TERMINAL 6 4 CONDUCTOR
4 WA100727 ELEC. CONNECTOR TERMINAL 4 2 WAY BRIDGE
5 WA100060 PLATE 1 MOUNTING RAIL
6 WA102823 PLATE 3 PLATE
7 WA102686 PLATE 2
8 WA101672 POWER CRIMP 40 .75 BLUE
9 WA100161 RESISTOR 4 270 OHM 2.5 WATT
10 WA101153 END PLATE 1 TERMINAL
11 WA101518 ELEC. CONNECTOR TERMINAL 12 3 CONNECTOR
12 WA100098 CONNECTOR 1 BLACK 23 PIN
13 WA101292 SCREW 6 M6 X 12
14 WA105108 SCREW 2 M5 X 30
15 WA100357 PLATE 1 MOUNTING
16 WA101572 MODULE 1 HEAD
17 WA102556 PLUG 1 DEUTSCH
18 WA101941 CONNECTOR 1 GRAY 23 PIN
19 WA101292 SCREW 2 M6 X 12
20 WA103289 CONNECTOR 1 BLUE 23 PIN
21 WA100397 PIN 69
22 WA101977 PIN 6

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 50-9

PN=121
 50-10
ELECTRICAL
RELAY BOX - TR100 CONTROLLER
TX1079573 -UN-

THIS PARTS LISTING IS CONTINUED

50-10 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=122
 50-11
ELECTRICAL
RELAY BOX - TR100 CONTROLLER

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 19M9264 SCREW 4 M5 X 12
2 F033852 CAP SCREW 2 M4 X 14 - 8.8 A3A
3 F351137 ELECTRICAL CONNECTOR ASSY 2 PG16 BRASS
4 WA100727 ELEC. CONNECTOR TERMINAL 2 BRIDGE
5 WA101153 ELEC. CONNECTOR TERMINAL 1 END STOP
6 WA101263 ELEC. CONNECTOR TERMINAL 5
7 WA101837 WASHER 2 4MM
8 WA102687 SEAL 1
9 WA102823 ELEC. CONNECTOR TERMINAL 2 6MM AND DIVIDER
10 WA103123 REDUCER 2 PG16 TO PG21
11 WA103128 PLUG 2 PG21
12 WA103479 4 5MM
13 WA110442 COVER 1 CIRCUIT BOX
14 WA110446 CIRCUIT BOX 1 T20
15 WA111831 CAP SCREW 6 M4 X 5
16 WA117975 RELAY 2 OMRON-G3NA-D210B
17 WA117976 RELAY 1 OMRON-G9EB-1-B
18 WA118118 PLATE 1
19 WA118526 RAIL 1 TOP HAT
20 WA118866 PLUG 1 PG11
21 WA101101 SEAL 1 INSULATING SLEEVE PG21

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 50-11

PN=123
 50-12
ELECTRICAL
TOP SAW PROXIMITY SWITCH
TX1059787 -UN-08JUL09

THIS PARTS LISTING IS CONTINUED

50-12 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=124
 50-13
ELECTRICAL
TOP SAW PROXIMITY SWITCH

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA100826 CAP SCREW 2 UNC 1/4" X 3/4" G8

2 WA100213 WASHER 2 1/4" DISC LOCK
3 WA110673 BRACKET 1
4 ........ NUT 2 M30
5 F351139 SWITCH 1 PROXIMITY - PNP - TIMBERRITE
WA101136 SWITCH 1 PROXIMITY - NPN TIMBERMATIC T10 (OPTIONAL);
TR100

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 50-13

PN=125
 50-14
ELECTRICAL
MEASURING ARM OPTION
TX1073843 -UN-18MAR10

THIS PARTS LISTING IS CONTINUED

50-14 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=126
 50-15
ELECTRICAL
MEASURING ARM OPTION

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 F350651 COUPLING 1
2 F350652 ISOLATOR 2
3 F351008 SCREW 1
4 F350386 SUPPORT 1
5 F351043 CLAMP 2
6 WA115779 ENCODER 1 TIMBERRITE 360 PPR ENCODER
WA115268 ENCODER 1 TIMBERMATIC T10 AND TR100 - 100 PPR ENCODER
7 WA102607 PIN 1
8 F350656 COUPLING 1
9 F351002 SCREW 1
10 WA115269 WIRING LEAD 1
11 WA115252 CLAMP 1 3-6MM
12 WA115253 CLAMP 1 6-8MM
13 WA102211 WASHER 2
14 WA115254 CAP SCREW 2 M4 X 10

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 50-15

PN=127
 50-16
ELECTRICAL
DIAMETER MEASURING - TIMBERRITE (SN -000017)
TX1059781 -UN-10JUL09

THIS PARTS LISTING IS CONTINUED

50-16 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=128
 50-17
ELECTRICAL
DIAMETER MEASURING - TIMBERRITE (SN -000017)

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA116263 SCREW 3 M10 X 40

2 WA116162 KEY 1
3 WA113645 GUIDE 1
4 WA113644 GUIDE 1
5 WA115285 SUPPORT 1
6 F067033 POTENTIOMETER 1
7 WA110683 CLAMP 1 HOSE
8 WA116192 PLATE 1 GUIDE
9 WA113098 POTENTIOMETER 1
10 WA106886 WIRING LEAD 1 M-12 FEMALE
11 WA106888 PLUG 1 M-12, 4-PIN MALE

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 50-17

PN=129
 50-18
ELECTRICAL
DIAMETER MEASURING - TIMBERRITE (SN 000018- ) AND TR100
TX1074174 -UN-12APR10

THIS PARTS LISTING IS CONTINUED

50-18 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=130
 50-19
ELECTRICAL
DIAMETER MEASURING - TIMBERRITE (SN 000018- ) AND TR100

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 19M9289 SCREW 3 M10 X 40

2 WA102211 WASHER 2
3 WA115254 CAP SCREW 2
4 WA115252 CLAMP 2
5 WA113645 GUIDE 1
6 WA115285 SUPPORT 1
7 WA113098 POTENTIOMETER 1
8 WA110683 CLAMP 1
9 WA117294 COVER 1
10 WA117029 PLATE 1
11 WA106886 PLUG 1 M-12 FEMALE
12 WA117290 GUIDE 1
13 F067033 POTENTIOMETER 1
14 WA106888 WIRING LEAD 1 M-12, 4 PIN MALE

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 50-19

PN=131
 50-20
ELECTRICAL
DIAMETER MEASURING (TIMBERMATIC T10)
TX1075774 -UN-07APR10

THIS PARTS LISTING IS CONTINUED

50-20 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=132
 50-21
ELECTRICAL
DIAMETER MEASURING (TIMBERMATIC T10)

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA116289 MOUNTING PARTS 1

2 WA115269 CABLE 1
3 WA116290 MOUNTING PARTS 1
4 19M9917 SCREW 3 M10 X 60 M10 X 1.5X60L GRD10.9
5 WA102211 WASHER 1 4MM STAR
6 WA115252 SCREW 1 M4 X 10
7 WA117029 CLAMP 1 3-6MM
8 WA117029 PLATE 1
9 WA115267 ENCODER 1 100 PPR

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 50-21

PN=133
 50-22
ELECTRICAL
SUPER 100 CUT CONTROL
TX1059717 -UN-21MAY09

THIS PARTS LISTING IS CONTINUED

50-22 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=134
 50-23
ELECTRICAL
SUPER CUT 100 CUT CONTROL

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 F056042 CABLE 3
2 WA111319 SENSOR 1 PNP, TIMBERRITE CONTROLLER
F071047 SENSOR 1 NPN, TIMBERMATIC T10 AND TR100 CONTROLLER
3 F057758 NUT 3 M8X1
4 F071047 SENSOR 2 NPN, TIMBERRITE/TIMBERMATIC T10 AND TR100
CONTROLLER
5 F056047 SCREW 2 M6 X 10MM (12.9) SOCKET HEAD CAP
6 F057757 PLATE 1

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 50-23

PN=135
 50-24
ELECTRICAL
3/4" MAIN SAW PROXIMITY SWITCH
TX1073669 -UN-18MAR10

THIS PARTS LISTING IS CONTINUED

50-24 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=136
 50-25
ELECTRICAL
3/4" MAIN SAW PROXIMITY SWITCH

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 ........ NUT 2
2 WA106149 SUPPORT 1
3 WA102525 WASHER 2 5/16" HARDENED
4 WA101342 BOLT 2 UNC 5/16" X 3/4", G8
5 F351139 SWITCH 1 PROXIMITY, PNP, TIMBERRITE
WA101136 SWITCH 1 PROXIMITY, NPN, TIMBERMATIC T10 AND TR100
6 F351076 PLUG 1 DUST

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 50-25

PN=137
 50-26
ELECTRICAL
ELECTRICAL CONNECTOR A (TIMBERRITE)
TX1063336 -UN-24AUG09

THIS PARTS LISTING IS CONTINUED

50-26 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=138
 50-27
ELECTRICAL
ELECTRICAL CONNECTOR A (TIMBERRITE)

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA116492 WIRING HARNESS 1 SAW MOTOR ACTIVATE

2 WA116491 WIRING HARNESS 1 TOP SAW RETURN
3 WA116488 WIRING HARNESS 1 SAW ACTIVATE

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 50-27

PN=139
 50-28
ELECTRICAL
ELECTRICAL CONNECTOR B (TIMBERRITE)
TX1063337 -UN-24AUG09

THIS PARTS LISTING IS CONTINUED

50-28 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=140
 50-29
ELECTRICAL
ELECTRICAL CONNECTOR B (TIMBERRITE)

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA116464 WIRING HARNESS 1 LEFT MOTOR CABLE

2 WA116465 WIRING HARNESS 1 RIGHT MOTOR CABLE
3 WA116487 WIRING HARNESS 1 MEASURING ARM CABLE
4 WA116467 WIRING HARNESS 1 FEED ARM CABLE
5 WA116468 WIRING HARNESS 1 UPPER DELIMB CABLE
6 WA116295 WIRING HARNESS 1 LOWER DELIMB OPEN
7 WA116461 WIRING HARNESS 1 LOWER DELIMB CLOSE

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 50-29

PN=141
 50-30
ELECTRICAL
ELECTRICAL CONNECTOR C (TIMBERRITE)
TX1063338 -UN-03SEP09

THIS PARTS LISTING IS CONTINUED

50-30 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=142
 50-31
ELECTRICAL
ELECTRICAL CONNECTOR C (TIMBERRITE)

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA116489 WIRING HARNESS 1 MAIN SAW PRESSURE

2 WA116466 WIRING HARNESS 1 HARVESTER TILT
3 WA116490 WIRING HARNESS 1 TILT LOCK

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 50-31

PN=143
 50-32
ELECTRICAL
ELECTRICAL CONNECTOR D (TIMBERRITE)
TX1063385 -UN-27AUG09

THIS PARTS LISTING IS CONTINUED

50-32 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=144
 50-33
ELECTRICAL
ELECTRICAL CONNECTOR D (TIMBERRITE)

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA116296 WIRING HARNESS 1 PULSE OILER

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 50-33

PN=145
 50-34
ELECTRICAL
ELECTRICAL CABLE SPECIFICATIONS (TIMBERRITE)

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

.. WA116492 CABLE 1 SAW MOTOR CABLE ASSEMBLY

.. WA101173 PLUG 1
.. WA100564 PIN 3
.. WA103215 SLEEVE 1 CABLE IDENTIFICATION LABEL
.. WA100838 CABLE 1 1.380M LONG
.. WA116490 CABLE 1 TILT LOCK CABLE ASSEMBLY
.. WA101173 PLUG 1
.. WA100564 PIN 2
.. WA103215 SLEEVE 1 CABLE IDENTIFICATION LABEL
.. WA100838 CABLE 1 1.500M LONG
.. WA116489 CABLE 1 MAIN SAW PRESSURE CABLE ASSEMBLY
.. WA101173 PLUG 1
.. WA100564 PIN 2
.. WA103215 SLEEVE 1 CABLE IDENTIFICATION LABEL
.. WA100838 CABLE 1 1.250M LONG
.. WA116488 CABLE 1 MAIN SAW CYLINDER CABLE ASSEMBLY
.. WA113007 PLUG 1
.. WA101977 PIN 2
.. WA103215 SLEEVE 1 CABLE IDENTIFICATION LABEL
.. WA100838 CABLE 1 1.220M LONG
.. WA116468 CABLE 1 UPPER DELIMB CABLE ASSEMBLY
.. WA101173 PLUG 1
.. WA100564 PIN 3
.. WA103215 SLEEVE 1 CABLE IDENTIFICATION LABEL
.. WA100838 CABLE 1 1.340M LONG
.. WA116467 CABLE 1 FEED ARMS CABLE ASSEMBLY
.. WA101173 PLUG 1
.. WA100564 PIN 3
.. WA103215 SLEEVE 1 CABLE IDENTIFICATION LABEL
.. WA100838 CABLE 1 1.300M LONG
.. WA116466 CABLE 1 TILT CABLE ASSEMBLY
.. WA101173 PLUG 1
.. WA100564 PIN 3
.. WA103215 SLEEVE 1 CABLE IDENTIFICATION LABEL
.. WA100838 CABLE 1 1.200M LONG
.. WA116465 CABLE 1 RIGHT MOTOR CABLE ASSEMBLY
.. WA101173 PLUG 1
.. WA100564 PIN 3
.. WA103215 SLEEVE 1 CABLE IDENTIFICATION LABEL
.. WA100838 CABLE 1 1.280M LONG
.. WA116464 CABLE 1 LEFT MOTOR CABLE ASSEMBLY
.. WA101173 PLUG 1
.. WA100564 PIN 3
.. WA103215 SLEEVE 1 CABLE IDENTIFICATION LABEL
.. WA100838 CABLE 1 1.290M LONG

50-34 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)

PN=146
 50-35
ELECTRICAL
ELECTRICAL CABLE SPECIFICATIONS (TIMBERRITE) (CONT)

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

.. WA116461 CABLE 1 LOWER DELIMB CLOSE CABLE ASSEMBLY

.. WA101173 PLUG 1
.. WA100564 PIN 2
.. WA103215 SLEEVE 1 CABLE IDENTIFICATION LABEL
.. WA100838 CABLE 1 1.050 LONG
.. WA116295 CABLE 1 LOWER DELIMB OPEN CABLE ASSEMBLY
.. WA101173 PLUG 1
.. WA100564 PIN 2
.. WA103215 SLEEVE 1 CABLE IDENTIFICATION LABEL
.. WA100838 CABLE 1 1.050M LONG
.. WA116296 CABLE 1 PULSE OILER CABLE ASSEMBLY
.. WA101173 PLUG 1
.. WA100564 PIN 2
.. WA103215 SLEEVE 1 CABLE IDENTIFICATION LABEL
.. WA100838 CABLE 1 1.040M LONG
.. WA116491 CABLE 1 TOP SAW RETURN CABLE ASSEMBLY
.. WA101173 PLUG 1
.. WA100564 PIN 2
.. WA103215 SLEEVE 1 CABLE IDENTIFICATION LABEL
.. WA100838 CABLE 1 1.500M LONG
.. WA116487 CABLE 1 MEASURING ARM CABLE ASSEMBLY
.. WA113007 PLUG 1
.. WA101977 PIN 2
.. WA103215 SLEEVE 1 CABLE IDENTIFICATION LABEL
.. WA100838 CABLE 1 1.140M LONG

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 50-35

PN=147
 50-36
ELECTRICAL
ELECTRICAL CONNECTOR A (TIMBERMATIC T10)
TX1076307 -UN-15APR10

THIS PARTS LISTING IS CONTINUED

50-36 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=148
 50-37
ELECTRICAL
ELECTRICAL CONNECTOR A (TIMBERMATIC T10)

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA118600 WIRING HARNESS 1 SAW MOTOR ACTIVATE

2 WA116302 WIRING HARNESS 1 TOP SAW RETURN (OPTIONAL)
3 WA118606 WIRING HARNESS 1 SAW ACTIVATE

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 50-37

PN=149
 50-38
ELECTRICAL
ELECTRICAL CONNECTOR B (TIMBERMATIC T10)
TX1076309 -UN-15APR10

THIS PARTS LISTING IS CONTINUED

50-38 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=150
 50-39
ELECTRICAL
ELECTRICAL CONNECTOR B (TIMBERMATIC T10)

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA118601 WIRING HARNESS 1 LEFT MOTOR CABLE

2 WA118604 WIRING HARNESS 1 RIGHT MOTOR CABLE
3 WA118608 WIRING HARNESS 1 MEASURING ARM CABLE
4 WA118603 WIRING HARNESS 1 FEED ARM CABLE
5 WA118605 WIRING HARNESS 1 UPPER DELIMB CABLE

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 50-39

PN=151
 50-40
ELECTRICAL
ELECTRICAL CONNECTOR C (TIMBERMATIC T10)
TX1076311 -UN-15APR10

THIS PARTS LISTING IS CONTINUED

50-40 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=152
 50-41
ELECTRICAL
ELECTRICAL CONNECTOR C (TIMBERMATIC T10)

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA118607 WIRING HARNESS 1 MAIN SAW PRESSURE

2 WA118602 WIRING HARNESS 1 HARVESTER TILT

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 50-41

PN=153
 50-42
ELECTRICAL
ELECTRICAL CONNECTOR D (TIMBERMATIC T10)
TX1076313 -UN-15APR10

THIS PARTS LISTING IS CONTINUED

50-42 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=154
 50-43
ELECTRICAL
ELECTRICAL CONNECTOR D (TIMBERMATIC T10)

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA116299 WIRING HARNESS 1 PULSE OILER (OPTIONAL)

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 50-43

PN=155
 50-44
ELECTRICAL
ELECTRICAL CABLE SPECIFICATIONS (TIMBERMATIC T10)

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

.. WA118600 CABLE 1 SAW MOTOR CABLE ASSEMBLY

.. WA101173 PLUG 1
.. F055290 PIN 3
.. WA100564 PIN 3
.. WA103215 SLEEVE 1 CABLE IDENTIFICATION LABEL
.. WA100838 CABLE 1 1.250M LONG
.. WA118607 CABLE 1 MAIN SAW PRESSURE CABLE ASSEMBLY
.. WA113007 PLUG 1
.. WA101977 PIN 2
.. WA103215 SLEEVE 1 CABLE IDENTIFICATION LABEL
.. WA100838 CABLE 1 1.150M LONG
.. WA118606 CABLE 1 MAIN SAW CYLINDER CABLE ASSEMBLY
.. WA113007 PLUG 1
.. WA101977 PIN 2
.. WA103215 SLEEVE 1 CABLE IDENTIFICATION LABEL
.. WA100838 CABLE 1 1.000M LONG
.. WA118605 CABLE 1 UPPER DELIMB CABLE ASSEMBLY
.. WA101173 PLUG 1
.. F055290 PIN 3
.. WA100564 PIN 3
.. WA103215 SLEEVE 1 CABLE IDENTIFICATION LABEL
.. WA100838 CABLE 1 1.160M LONG
.. WA118603 CABLE 1 FEED ARMS CABLE ASSEMBLY
.. WA101173 PLUG 1
.. F055290 PIN 3
.. WA100564 PIN 3
.. WA103215 SLEEVE 1 CABLE IDENTIFICATION LABEL
.. WA100838 CABLE 1 1.110M LONG
.. WA118602 CABLE 1 TILT CABLE ASSEMBLY
.. WA101173 PLUG 1
.. F055290 PIN 3
.. WA100564 PIN 3
.. WA103215 SLEEVE 1 CABLE IDENTIFICATION LABEL
.. WA100838 CABLE 1 1.110M LONG
.. WA118605 CABLE 1 RIGHT MOTOR CABLE ASSEMBLY
.. WA101173 PLUG 1
.. F055290 PIN 3
.. WA100564 PIN 3
.. WA103215 SLEEVE 1 CABLE IDENTIFICATION LABEL
.. WA100838 CABLE 1 1.160M LONG
.. WA118601 CABLE 1 LEFT MOTOR CABLE ASSEMBLY
.. WA101173 PLUG 1
.. F055290 PIN 3
.. WA100564 PIN 3
.. WA103215 SLEEVE 1 CABLE IDENTIFICATION LABEL
.. WA100838 CABLE 1 1.225M LONG

50-44 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)

PN=156
 50-45
ELECTRICAL
ELECTRICAL CABLE SPECIFICATIONS (TIMBERMATIC T10) - CONT.

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

.. WA116299 CABLE 1 PULSE OILER CABLE ASSEMBLY

.. WA101173 PLUG 1
.. F055290 PIN 2
.. WA100564 PIN 2
.. WA103215 SLEEVE 1 CABLE IDENTIFICATION LABEL
.. WA100838 CABLE 1 1.040M LONG
.. WA116302 CABLE 1 TOP SAW RETURN CABLE ASSEMBLY
.. WA101173 PLUG 1
.. F055290 PIN 2
.. WA100564 PIN 2
.. WA103215 SLEEVE 1 CABLE IDENTIFICATION LABEL
.. WA100838 CABLE 1 1.340M LONG
.. WA118608 CABLE 1 MEASURING ARM CABLE ASSEMBLY
.. WA113007 PLUG 1
.. WA101977 PIN 2
.. WA103215 SLEEVE 1 CABLE IDENTIFICATION LABEL
.. WA100838 CABLE 1 1.00M LONG

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 50-45

PN=157
 50-46
ELECTRICAL
ELECTRICAL CONNECTOR (TR100)
TX1083490 -UN-

THIS PARTS LISTING IS CONTINUED

50-46 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=158
 50-47
ELECTRICAL
ELECTRICAL HARNESS (TR100)

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA118449 WIRING HARNESS 1

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 50-47

PN=159
 50-48
ELECTRICAL
ELECTRICAL CONNECTOR (TR100)
TX1084359 -UN-

THIS PARTS LISTING IS CONTINUED

50-48 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=160
 50-49
ELECTRICAL
ELECTRICAL HARNESS (TR100)

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 57M9800 ELEC. CONNECTOR HOUSING 1 12 WAY AMPSEAL PLUG

57M8263 ELEC. CONNECTOR HOUSING 36 16-18 AWG SOCKET-GOLD
57M9814 ELEC. CONNECTOR HOUSING AR BLANKING PLUG AMP SEAL
2 57M9786 ELEC. CONNECTOR HOUSING 1 6 WAY AMPSEAL PLUG
57M8263 ELEC. CONNECTOR TERMINAL 6 16-18 AWG SOCKET - GOLD
57M9814 ELEC. CONNECTOR HOUSING AR BLANKING PLUG AMP SEAL
3 57M9789 ELEC. CONNECTOR HOUSING 1 6 WAY AMPSEAL RECEPTACAL
4 57M10606 ELEC. CONNECTOR HOUSING 1 32 WAY MOLEX PLUG (BLUE)
57M10604 ELEC. CONNECTOR HOUSING 1 SMALL CAP (J3)
57M10334 ELEC. CONNECTOR CAVITY PLUG AR BLANKING PLUG 1.5MM (ORANGE)
57M10333 ELEC. CONNECTOR CAVITY PLUG AR BLANKING PLUG 0.6MM (WHITE)
57M10330 ELEC. CONNECTOR TERMINAL 24 0.635 MM SOCKET
5 57M10615 ELEC. CONNECTOR HOUSING 1 48 WAY MOLEX PLUG
57M10613 ELEC. CONNECTOR HOUSING 1 LARGE CAP (J2)
57M10334 ELEC. CONNECTOR CAVITY PLUG AR BLANKING PLUG 1.5MM (ORANGE)
57M10333 ELEC. CONNECTOR CAVITY PLUG AR BLANKING PLUG 0.6MM (WHITE)
57M10330 ELEC. CONNECTOR TERMINAL 24 0.635 MM SOCKET
6 57M10612 ELEC. CONNECTOR HOUSING 1 32 MOLEX PLUG (RED)
57M10604 ELEC. CONNECTOR HOUSING 1 SMALL CAP (J1)
57M10334 ELEC. CONNECTOR CAVITY PLUG AR BLANKING PLUG 1.5MM (ORANGE)
57M10333 ELEC. CONNECTOR CAVITY PLUG AR BLANKING PLUG 0.6MM (WHITE)
57M10330 ELEC. CONNECTOR TERMINAL 24 0.635 MM SOCKET
7 WA101173 PLUG 6 HERSCHMAN 0N/OFF PLUG (BLACK)
WA100564 PIN AR
8 WA101754 ELEC. CONNECTOR HOUSING 4 HERSHMAN PROPORTIONAL PLUG (GREY)
9 WA113007 PLUG 3 DEUTSCH 2 PIN PLUG
WA101977 PIN AR

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 50-49

PN=161
 50-50
ELECTRICAL
ELECTRICAL HOSES AND FITTINGS (TIMBERRITE)
TX1061021 -UN-08JUL09

THIS PARTS LISTING IS CONTINUED

50-50 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=162
 50-51
ELECTRICAL
ELECTRICAL HOSES AND FITTINGS (TIMBERRITE)

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA116329 HOSE 1
2 WA110048 TUBE 1 GREY
3 WA110048 TUBE 1 GREY
4 WA116017 HOSE 1
5 WA115988 HOSE 1

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 50-51

PN=163
 50-52
ELECTRICAL
ELECTRICAL HOSES AND FITTINGS (TIMBERMATIC T10)
TX1076306 -UN-15APR10

THIS PARTS LISTING IS CONTINUED

50-52 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=164
 50-53
ELECTRICAL
ELECTRICAL HOSES AND FITTINGS (TIMBERMATIC T10)

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA116329 HOSE 1 TOP PROXIMITY

2 WA110048 TUBE 1 PHOTO CELL
3 WA110048 TUBE 1 MAIN SAW PROXIMITY
4 WA116017 HOSE 1 DIAMETER ENCODER
5 WA115988 HOSE 1 LENGTH ENCODER

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 50-53

PN=165
 50-54
ELECTRICAL
ELECTRICAL HOSES AND FITTINGS (TR100)
TX1083491 -UN-

THIS PARTS LISTING IS CONTINUED

50-54 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=166
 50-55
ELECTRICAL
ELECTRICAL HOSES AND FITTINGS (TR100)

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA116329 HOSE 1 TOP PROXIMITY

2 WA110048 TUBE 1 PHOTO CELL
3 WA110048 TUBE 1 MAIN SAW PROXIMITY
4 WA116017 HOSE 1 DIAMETER ENCODER
5 WA115988 HOSE 1 LENGTH ENCODER

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 50-55

PN=167
 60-2
FIND END
FIND END
TX1059474 -UN-16JUN09

THIS PARTS LISTING IS CONTINUED

60-2 WARATAH HTH616C HARVESTER PC10314 (17-JUL-09)
PN=168
 60-3
FIND END
FIND END

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

0 WA111782 SENSOR 1 FIND END UNIT

1 WA111522 HOUSING 1
2 WA115024 ASSEMBLY FIXTURE 1
3 WA111808 PAD 1 ABSORBER
4 F350617 SENSOR 1 FIND END - PNP, TIMBERRITE; NPN, TIMBERMATIC
T10 AND TR100
5 WA115021 COVER 1 FIND END
6 19M3205 CAP SCREW 4 M12 X 30
7 WA102555 WASHER 4
8 WA111810 SPACER 4 TOP HAT
9 F350060 ABSORBER 4 LURETHANE
10 WA101038 NUT 2 1/4" HARDENED
11 WA100426 WASHER 2 UNC 1/4" G8 NYLOC
12 WA115023 GUSSET 1 ABSORBER
13 WA115025 NUT 1 FIND END UNIT
14 WA102525 WASHER 2 5/16 HARDENED WASHER
15 WA104933 GROMMET 1
16 ........ SCREW 2

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 60-3

PN=169
 70-2
HYDRAULICS
VALVE ASSEMBLY (NON TOPSAW)
TX1083317 -UN-

THIS PARTS LISTING IS CONTINUED

70-2 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=170
 70-3
HYDRAULICS
VALVE ASSEMBLY (NON TOPSAW)

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA115933 VALVE 1 NON TOPSAW OPTION

2 F351122 HYDRAULIC ACCUMULATOR 1
3 WA116062 SUPPORT 1
4 F350523 ISOLATOR 3
5 F350526 WASHER 3
6 F350525 WASHER 3
7 WA102654 WASHER 3
8 WA101022 BOLT 3
9 WA109705 BRACKET 1
10 WA103511 BOLT 2
11 WA102555 WASHER 8
12 WA102173 BOLT 8
13 WA101121 THREADED NIPPLE 1
14 F350806 WASHER KIT 1 M18 DOWTY
15 F351039 SHAFT KEY 1 3/8" X 3/8" X 2-3/4"

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 70-3

PN=171
 70-4
HYDRAULICS
VALVE ASSEMBLY (TOPSAW)
TX1083317 -UN-

THIS PARTS LISTING IS CONTINUED

70-4 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=172
 70-5
HYDRAULICS
VALVE ASSEMBLY (TOP SAW)

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA116605 VALVE 1 TOPSAW OPTION

2 F351122 HYDRAULIC ACCUMULATOR 1
3 WA116062 SUPPORT 1
4 F350523 ISOLATOR 3
5 F350526 WASHER 3
6 F350525 WASHER 3
7 WA102654 WASHER 3 5/8" LOCK
8 WA101022 BOLT 3 M16 X 60
9 WA109705 BRACKET 1
10 WA103511 BOLT 2
11 WA102555 WASHER 8
12 WA102173 BOLT 8
13 WA101121 THREADED NIPPLE 1 M18 - 9/16" JICM
14 F350806 WASHER KIT 1 M18 DOWTY
15 F351039 SHAFT KEY 1 3/8" X 3/8" X 2-3/4"

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 70-5

PN=173
 70-6
HYDRAULICS
VALVE SECTION SEAL KITS
TX1080531 -UN-

THIS PARTS LISTING IS CONTINUED

70-6 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=174
 70-7
HYDRAULICS
VALVE SECTION SEAL KITS

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 ........ O-RING 16 NO. 10

2 ........ O-RING 4 NO. 7
3 ........ O-RING 4 NO. 9
4 ........ O-RING 8 NO. 6
5 ........ O-RING 4 NO. 8
6 ........ ROD 3 PVG32 SECTION
7 WA116048 SEAL KIT 1 PVG 32 SECTION
8 ........ O-RING 20 NO. 5
9 ........ O-RING 8 NO. 3
10 ........ O-RING 4 NO. 2
11 ........ O-RING 8 NO. 1
12 ........ ROD 3 PVG100 SECTION
13 WA116047 SEAL KIT 1 PVG100 SECTION

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 70-7

PN=175
 70-8
HYDRAULICS
PVG32 MANIFOLD - NON TOP SAW
TX1060013 -UN-09JUL09

THIS PARTS LISTING IS CONTINUED

70-8 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=176
 70-9
HYDRAULICS
PVG32 MANIFOLD - NON TOP SAW

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA116054 MANIFOLD 1
2 WA101135 FITTING 2
3 WA103606 PLUG 5 RELIEF, A SIDE

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 70-9

PN=177
 70-10
HYDRAULICS
PVG32 MANIFOLD - TOP SAW
TX1079167 -UN-

THIS PARTS LISTING IS CONTINUED

70-10 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=178
 70-11
HYDRAULICS
PVG32 MANIFOLD - TOP SAW

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA101361 ADAPTER FITTING 3 1/4" X 7/16" JIC NIPPLE

2 WA101135 FITTING 1 1/4" BSP TEST POINT
3 WA101835 ADAPTER FITTING 1 3/8" X 7/16" JIC NIPPLE
4 WA105883 CONTROL VALVE 1
5 WA102600 FITTING 1 3/4" X 1" ORFS NIPPLE
6 WA115810 HYDRAULIC PRESSURE VALVE 1
7 ........ O-RING 1
8 ........ BACK-UP RING 1 SOLID BLACK
9 ........ O-RING 3
10 ........ BACK-UP RING 4 SPLIT WHITE
11 WA115809 MANIFOLD 1
12 WA114768 SEAL KIT 1
13 WA102573 FITTING 1 7/16 JICM - 7/16 JICF S/N
14 WA103188 FITTING PLUG 2 1/4 BSPPM PLUG
15 WA101140 WASHER 6 1/4" DOWTY -04
16 WA103517 WASHER 1 3/8" DOWTY -06
17 WA102979 O-RING 2 731-018N90-ORFS ID 0.739" (18.8 MM) X W 0.07"
(1.78 MM)
18 840080100 O-RING 1 3/8" BSP (-06)
19 WA102850 WASHER 1 1-3/4" DOWTY (-12)

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 70-11

PN=179
 70-12
HYDRAULICS
PVG32 UPPER DELIMB VALVE SECTION
TX1084738 -UN-

THIS PARTS LISTING IS CONTINUED

70-12 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=180
 70-13
HYDRAULICS
PVG32 UPPER DELIMB VALVE SECTION

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA107548 ACTUATOR 1 ELECTRICAL - PROPORTIONAL

2 WA101652 SEAL KIT 1
3 WA102842 RELIEF VALVE 1 B PORT 150 BAR RELIEF VALVE
4 WA100418 RELIEF VALVE 1 A PORT 210 BAR RELIEF VALVE
5 WA117432 VALVE 1 PVG32 BLOCK
6 WA101931 VALVE SPOOL 1
7 WA102090 SEAL KIT 1
8 WA104404 ACTUATOR 1
9 WA118717 SEAL KIT 1 (CONTAINS 9 0-RINGS) PVE INTERNAL SEAL KIT
10 WA101547 SPACER 4 1/2 DOWTY -08
11 WA115748 FITTING 7 1/2 BSPPM - 1/2 BSPP F/SOLID
12 F351067 FITTING 2 SPECIAL FOR WARATAH
13 WA117300 FITTING 4 1/4 BSPPM O/R - M16X2 TEST
14 F351075 FITTING 2 1/2 BSPPM - 13/16 ORFSM
15 WA100674 O-RING 3 731-014N90-ORFS ID 0.488" (12.4MM) X W 0.07"
(1.78MM) (-08)
16 WA116686 FITTING 1 1/2 BSP - 13/16 ORFS WITH 3MM ORIFICE
17 WA101140 WASHER 1 1/4" DOWTY (-04)

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 70-13

PN=181
 70-14
HYDRAULICS
PVG 32 FEED ARM VALVE SECTION
TX1083352 -UN-

THIS PARTS LISTING IS CONTINUED

70-14 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=182
 70-15
HYDRAULICS
PVG 32 FEED ARM VALVE SECTION

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA107548 ACTUATOR 1 ELECTRICAL - PROPORTIONAL

2 WA101652 SEAL KIT 1
3 WA102842 RELIEF VALVE 2 A PORT 150 BAR; B PORT 150 RELIEF VALVE
4 WA104404 ACTUATOR 1
5 WA117432 VALVE 1 PVG32 BLOCK
6 WA101794 VALVE SPOOL 1
7 WA102090 SEAL KIT 1
8 WA118717 SEAL KIT 1 (CONTAINS 9 0-RINGS) PVE INTERNAL SEAL KIT
9 WA101140 SEALING WASHER 1 1/4" DOWTY (-04)
10 WA101547 SEALING WASHER 4 1/2 DOWTY -08
11 WA100951 FITTING 1 1/4 BSPPM O/R - M16X2 TEST
12 F351067 FITTING 1 SPECIAL FOR WARATAH
13 F351074 FITTING 1 SPECIAL FITTING FOR WARATAH
14 WA102610 ELBOW FITTING 4 13/16 ORFSM - 13/16 ORFSF S/N
15 WA116420 FITTING 2 13/16 ORFSM - 13/16 ORFSF S/N
16 WA100674 O-RING 10 731-014N90-ORFS ID 0.488" X W 0.07" (-08)
17 WA118971 FITTING 1 1/2 BSPPM - 13/16 ORFSM

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 70-15

PN=183
 70-16
HYDRAULICS
PVG 32 TILT VALVE SECTION
TX1083344 -UN-

THIS PARTS LISTING IS CONTINUED

70-16 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=184
 70-17
HYDRAULICS
PVG 32 TILT VALVE SECTION

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA103186 ACTUATOR 1 ELECTRICAL - (ON/OFF)

2 WA101652 SEAL KIT 1
3 WA102842 RELIEF VALVE 1 B PORT 150 BAR RELIEF VALVE
4 WA100418 RELIEF VALVE 1 A PORT 210 BAR RELIEF VALVE
5 WA117432 VALVE 1 PVG32 BLOCK
6 WA116253 VALVE SPOOL 1
7 WA102090 SEAL KIT 1
8 WA104404 ACTUATOR 1
9 WA118717 SEAL KIT 1 (CONTAINS 9 0-RINGS) PVE INTERNAL SEAL KIT
10 WA101547 WASHER 4 1/2 DOWTY -08
11 WA115748 FITTING 2 1/2 BSPPM - 1/2 BSPP F/SOLID
12 WA115777 FITTING 2 1/2 BSPPM - 11/16 ORFSM
13 WA115749 FITTING 1 11/16 ORFSM - 11/16 ORFSF S/N
14 WA115768 ELBOW FITTING 2 11/16 ORFSM - 11/16 ORFSF S/N
15 WA118952 O-RING 6 731-012N90-ORFS ID 0.364" (9.3 MM) X W 0.07"
(1.78 MM) -06

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 70-17

PN=185
 70-18
HYDRAULICS
VALVE MANIFOLD
TX1078153 -UN-

THIS PARTS LISTING IS CONTINUED

70-18 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=186
 70-19
HYDRAULICS
VALVE MANIFOLD

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA101415 SOLENOID VALVE COIL 1

2 WA116743 VALVE 1
3 ........ O-RING 1
4 ........ O-RING 2
5 ........ BACK-UP RING 4 WHITE, SPLIT
6 F351112 RELIEF VALVE 2
7 ........ BACK-UP RING 2 RED, SOLID
8 ........ O-RING 2
9 ........ O-RING 1
10 ........ BACK-UP RING 1 RED, SOLID
11 WA103606 PLUG 2 908 BG 1/4-8.8
12 WA112531 SOLENOID VALVE COIL 2
13 WA115090 SOLENOID VALVE 2
14 ........ O-RING 1
15 ........ O-RING 3 O-RING WITH BUILT IN BACK-UP RING
16 WA116793 SOLENOID VALVE COIL 1
17 WA105882 VALVE 1
18 ........ O-RING 1
19 ........ O-RING 1
20 ........ BACK-UP RING 2 WHITE, SPLIT
21 WA112533 RELIEF VALVE 1
22 ........ O-RING 1
23 WA113309 HYDRAULIC PRESSURE VALVE 1
24 ........ O-RING 1
25 ........ O-RING 2
26 ........ BACK-UP RING 2 YELLOW, SOLID
27 ........ BACK-UP RING 2 RED, SOLID
28 ........ BACK-UP RING 1 WHITE, SPLIT
29 ........ O-RING 1
30 ........ O-RING 1
31 WA112809 HYDRAULIC PRESSURE VALVE 1
32 WA115804 MANIFOLD 1
33 WA110243 SEAL KIT 3
34 WA116613 SEAL KIT 1
35 WA116614 SEAL KIT 3
36 AT350215 SEAL KIT 1
37 F435664 SEAL KIT 1
38 WA115088 SEAL KIT 1
39 WA116615 SEAL KIT 1
40 ........ BACK-UP RING 1 BLACK, SOLID
41 WA117360 RELIEF VALVE 1

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 70-19

PN=187
 70-20
HYDRAULICS
MAIN VALVE AND FITTINGS
TX1080519 -UN-

THIS PARTS LISTING IS CONTINUED

70-20 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=188
 70-21
HYDRAULICS
VALVE MANIFOLD FITTINGS

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA101135 FITTING 4 1/4 BSPPM O/R - M16X2 TEST

2 WA102850 WASHER 3 3/4" DOWTY -12
3 WA115750 FITTING 1 1-1/4 BSPPM - 1-5/8 JICM
4 WA115748 FITTING 7 1/2 BSPPM - 1/2 BSPP F/SOLID
5 WA115777 FITTING 3 1/2 BSPPM - 11/16 ORFSM
6 WA101547 SPACER 4 1/2 DOWTY -08
7 WA118952 O-RING 4 731-012N90-ORFS ID 0.364" (9.3 MM) X W 0.07"
(1.78 MM) -06
8 WA101140 WASHER 14 1/4" DOWTY -04
9 WA102690 O-RING 1 731-021N90-ORFS ID 0.926" (23.5 MM) X W 0.07"
(1.78 MM) -16
10 WA115766 ADAPTER FITTING 1 1/4 BSPPM - 11/16 ORFSM
11 WA115768 ELBOW FITTING 6 11/16 ORFSM - 11/16 ORFSF S/N
12 WA118408 VALVE 1 THROTTLE
13 WA117841 ADAPTER FITTING 1 1/4 BSPPM - 11/16 ORFS S/N
14 WA118362 ORIFICE 1 ORIFICE 3/8 BSPPM - 11/16 ORFSM 3 MM ORIFICE
15 WA115767 FITTING 1 3/8 BSPPM - 11/16 ORFSM
16 WA103517 WASHER 4 3/8" DOWTY -06
17 WA115804 MANIFOLD 1 INLET
18 WA116638 SOCKET HEAD SCREW 2 M12 X 20 BUTTON HEAD
19 WA116036 BRACKET 1 VALVE
20 WA101677 FITTING 2 3/4 BSPPM - 1-1/16 JICM
21 WA102143 WASHER 1 1" DOWTY -16
22 WA116780 FITTING 1 1BSPP - 1-7/16 ORFS X 65MM
23 WA100565 WASHER 1 1-1/4" DOWTY -20

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 70-21

PN=189
 70-22
HYDRAULICS
VALVE FITTINGS
TX1083547 -UN-

THIS PARTS LISTING IS CONTINUED

70-22 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=190
 70-23
HYDRAULICS
VALVE FITTINGS

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA100799 TEE FITTING 1 9/16 JICM - 9/16 JICF - 9/16 JICM

2 WA102853 THREADED NIPPLE 4 1/4 BSPPM - 9/16 JICM
3 WA101141 ELBOW FITTING 3 9/16 JICM - 9/16 JICF S/N
4 WA101135 FITTING 3 1/4 BSPPM O/R - M16X2 TEST
5 WA102573 ELBOW FITTING 2 7/16 - 7/16 JIC - 45 DEGREE
6 WA117297 ADAPTER FITTING 2 1/2 BSPPM - 9/16 JICM
7 WA101547 WASHER 1 1/2 DOWTY -08
8 WA102789 ELBOW FITTING 1 3/4 JICM - 3/4 JICF 90 DEGREE
9 WA101140 WASHER 7 1/4 DOWTY -04
10 WA117360 VALVE 1
11 WA101361 THREADED NIPPLE 2 1/4 BSPPM - 7/16 JICM
12 WA115019 THREADED NIPPLE 1 1/4 BSPPM - COMPACT 90
13 WA100040 THREADED NIPPLE 1 9/16 JICM - 9/16 JICF - 45 DEGREE
14 WA102433 THREADED NIPPLE 1 3/8 BSPPM - 3/8 BSPPM
15 WA103051 ELBOW FITTING 1 3/8 BSPTM - 3/8 BSPPF - 45 DEGREE
16 WA100862 ADAPTER FITTING 1 3/8 BSPPM - 3/8 BSPPF - 45 DEGREE
17 F35116 VALVE 1 THROTTLE
18 WA103344 THREADED NIPPLE 1 3/8 BSPPM - 9/16 JICM
19 WA103517 WASHER 2 3/8 DOWTY -06
20 WA102842 ELBOW FITTING 1

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 70-23

PN=191
 70-24
HYDRAULICS
PVG 100 R.H. FEED MOTOR VALVE SECTION
TX1084736 -UN-

THIS PARTS LISTING IS CONTINUED

70-24 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=192
 70-25
HYDRAULICS
PVG 100 R.H. FEED MOTOR VALVE SECTION

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA107548 ACTUATOR 1 ELECTRICAL - PROPORTIONAL

2 WA116719 RELIEF VALVE 1 B PORT 350 BAR FORWARD RELIEF VALVE
3 WA101652 SEAL KIT 1
4 WA116504 CAP 1
5 WA116498 SPRING 1
6 WA116506 HOUSING 1
7 WA116501 O-RING 1
8 WA116037 VALVE 1
9 WA116255 RELIEF VALVE 1 A PORT 280 BAR REVERSE RELIEF VALVE
10 WA116251 VALVE SPOOL 1
11 WA102090 SEAL KIT 1
12 WA104404 ACTUATOR 1
13 WA118717 SEAL KIT 1 (CONTAINS 9 0-RINGS) PVE INTERNAL SEAL KIT
14 WA102850 WASHER 1 3/4" DOWTY -12
15 WA112971 ADAPTER FITTING 2 3/4 BSPPM - 3/4 BSPP F/SOLID
16 WA102979 O-RING 4 O RING TO SUIT 1-3/16 ORFS
17 WA103100 FITTING 5 3/4 BSPPM X 1-3/16 ORFSM
18 WA100064 ELBOW FITTING 4 1-3/16 ORFSM - 1-3/16 ORFSF

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 70-25

PN=193
 70-26
HYDRAULICS
PVG 100 L.H. FEED MOTOR VALVE SECTION
TX1084665 -UN-

THIS PARTS LISTING IS CONTINUED

70-26 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=194
 70-27
HYDRAULICS
PVG 100 L.H. FEED MOTOR VALVE SECTION

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA107548 ACTUATOR 1 ELECTRICAL - PROPORTIONAL

2 WA116719 RELIEF VALVE 1 B PORT 350 BAR FORWARD RELIEF VALVE
3 WA101652 SEAL KIT 1
4 WA116504 CAP 1
5 WA116498 SPRING 1
6 WA116506 HOUSING 1
7 WA116501 O-RING 1
8 WA116037 VALVE 1
9 WA116255 RELIEF VALVE 1 A PORT 280 BAR REVERSE RELIEF VALVE
10 WA116251 VALVE SPOOL 1
11 WA102090 SEAL KIT 1
12 WA104404 ACTUATOR 1
13 WA118717 SEAL KIT 1 (CONTAINS 9 0-RINGS) PVE INTERNAL SEAL KIT
14 WA102850 WASHER 1 3/4" DOWTY -12
15 WA103100 FITTING 5 3/4 BSPPM X 1-3/16 ORFSM
16 WA112971 ADAPTER FITTING 2 3/4 BSPPM - 3/4 BSPP F/SOLID
17 WA100064 ELBOW FITTING 4 1-3/16 ORFSM - 1-3/16 ORFSF
18 WA102979 O-RING 4 O RING TO SUIT 1-3/16 ORFS

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 70-27

PN=195
 70-28
HYDRAULICS
PVG 100 MAIN SAW VALVE SECTION
TX1084666 -UN-

THIS PARTS LISTING IS CONTINUED

70-28 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=196
 70-29
HYDRAULICS
PVG 100 MAIN SAW VALVE SECTION

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA103186 ACTUATOR 1 ELECTRICAL (ON/OFF)

2 WA103151 RELIEF VALVE 2 A PORT AND B PORT HAVE 265 BAR RELIEF VALVES
(A PORT FOR TOP SAW) (B PORT FOR MAIN SAW)
3 WA101652 SEAL KIT 1
4 WA116504 CAP 1
5 WA116498 SPRING 1
6 WA116506 HOUSING 1
7 WA116501 O-RING 1
8 WA116257 VALVE 1
9 WA104404 ACTUATOR 1
10 WA116254 VALVE SPOOL 1
11 WA102090 SEAL KIT 1
12 WA118717 SEAL KIT 1 (CONTAINS 9 0-RINGS) PVE INTERNAL SEAL KIT
13 WA103100 FITTING 5 3/4 BSPPM X 1-3/16 ORFSM
14 WA102850 WASHER 1 3/4" DOWTY -12
15 WA102979 O-RING 4 O RING TO SUIT 1-3/16 ORFS
16 WA100064 ELBOW FITTING 4 1-3/16 ORFSM - 1-3/16 ORFSF

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 70-29

PN=197
 70-30
HYDRAULICS
PVG 100 TOP SAW MANIFOLD ( -00038)
TX1082709 -UN-

THIS PARTS LISTING IS CONTINUED

70-30 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=198
 70-31
HYDRAULICS
PVG 100 TOP SAW MANIFOLD ( -00038)

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA103606 PLUG 3
2 WA103344 FITTING 2 3/8" BSPPM X 9/16" JICM
3 ........ BACK-UP RING 8 SPLIT, WHITE
4 ........ O-RING 5
5 ........ O-RING 1
6 WA116743 VALVE 1
7 WA101415 SOLENOID VALVE COIL 1
8 WA119072 MANIFOLD 1
9 WA101135 FITTING 1 TEST POINT
10 WA103217 O-RING 1 731-016N90-ORFS ID 0.614" X W 0.07" (-10)
11 ........ O-RING 1
12 WA117307 RELIEF VALVE 1
13 WA102600 FITTING 2 3/4" BSPPM X 1" ORFSM
14 WA114768 SEAL KIT 1
15 WA110243 SEAL KIT 1
16 WA103517 SEALING WASHER 2 3/8 DOWTY (-06)
17 WA102850 SEALING WASHER 2 3/4 DOWTY (-12)

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 70-31

PN=199
 70-32
HYDRAULICS
PVG 100 TOP SAW MANIFOLD (00039- )
TX1082709 -UN-

THIS PARTS LISTING IS CONTINUED

70-32 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=200
 70-33
HYDRAULICS
PVG 100 TOP SAW MANIFOLD (00039- )

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA103606 PLUG 3
2 WA103344 FITTING 2 3/8" BSPPM X 9/16" JICM
3 ........ BACK-UP RING 8 SPLIT, WHITE
4 ........ O-RING 5
5 ........ O-RING 1
6 WA116743 VALVE 1
7 WA101415 SOLENOID VALVE COIL 1
8 WA119072 MANIFOLD 1
9 WA101135 FITTING 1 TEST POINT
10 WA103217 O-RING 1 731-016N90-ORFS ID 0.614" X W 0.07" (-10)
11 ........ O-RING 1
12 WA117307 RELIEF VALVE 1
13 WA102600 FITTING 2 3/4" BSPPM X 1" ORFSM
14 WA114768 SEAL KIT 1
15 WA110243 SEAL KIT 1
16 WA103517 SEALING WASHER 2 3/8 DOWTY (-06)
17 WA102850 SEALING WASHER 2 3/4 DOWTY (-12)

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 70-33

PN=201
 70-34
HYDRAULICS
PVG 100 NON-TOP SAW MANIFOLD ( -00038)
TX1082710 -UN-

THIS PARTS LISTING IS CONTINUED

70-34 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=202
 70-35
HYDRAULICS
PVG 100 NON-TOP SAW MANIFOLD ( -00038)

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA103606 PLUG 4
2 WA102853 FITTING 1 1/4" BSPPM X 9/16" JICM
3 F351078 PIPE PLUG 1
4 WA101135 FITTING 1 TEST POINT
5 ........ BACK-UP RING 4 SPLIT, WHITE
6 ........ O-RING 3
7 ........ BACK-UP RING 1 SOLID, BLACK
8 WA103217 2 731-016N90 ORFS ID 0.614" X W0.07" (-10)
9 WA117307 RELIEF VALVE 1
10 WA102600 FITTING 2 3/4" BSPPM X 1 ORFSM
11 WA119072 MANIFOLD 1
12 WA114768 SEAL KIT 1
13 WA101140 SEALING WASHER 1 1/4 DOWTY (-04)
14 WA102850 2 3/4 DOWTY (-12)

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 70-35

PN=203
 70-36
HYDRAULICS
PVG 100 NON-TOP SAW MANIFOLD (00039- )
TX1084339 -UN-

THIS PARTS LISTING IS CONTINUED

70-36 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=204
 70-37
HYDRAULICS
PVG 100 NON-TOP SAW MANIFOLD (00039- )

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA103606 PLUG 4
2 WA102853 FITTING 1 1/4" BSPPM X 9/16" JICM
3 F351078 PIPE PLUG 1
4 WA101135 FITTING 1 TEST POINT
5 ........ BACK-UP RING 4 SPLIT, WHITE
6 ........ O-RING 3
7 ........ BACK-UP RING 1 SOLID, BLACK
8 WA103217 2 731-016N90 ORFS ID 0.614" X W0.07" (-10)
9 WA117307 RELIEF VALVE 1
10 WA102600 FITTING 2 3/4" BSPPM X 1 ORFSM
11 WA119072 MANIFOLD 1
12 WA114768 SEAL KIT 1
13 WA101140 SEALING WASHER 1 1/4 DOWTY (-04)
14 WA102850 2 3/4 DOWTY (-12)

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 70-37

PN=205
 70-38
HYDRAULICS
ROTATOR MANIFOLD
TX1060025 -UN-02JUN09

THIS PARTS LISTING IS CONTINUED

70-38 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=206
 70-39
HYDRAULICS
ROTATOR MANIFOLD

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 ........ CAP 2
2 ........ SPOOL 2
3 WA101601 RELIEF VALVE 2 80 BAR
4 WA103154 O-RING 2 119N90
5 WA101140 WASHER 2 1/4" DOWTY
6 WA101135 DIAGNOSTIC COUPLING 2 1/4" BSP TEST POINT
7 ........ HOUSING 1 BLOCK
8 19M3136 CAP SCREW 2 M8 X 45 S/CAP
9 F351094 MANIFOLD 1

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 70-39

PN=207
 70-40
HYDRAULICS
CASE DRAIN BLOCK
TX1079113 -UN-18AUG10

THIS PARTS LISTING IS CONTINUED

70-40 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=208
 70-41
HYDRAULICS
CASE DRAIN BLOCK

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA101777 FITTING 1 1/2 BSPPM - 3/4 JICM

2 WA103344 THREADED NIPPLE 2 3/8 BSPPM - 9/16 JICM
3 WA102853 FITTING 2 1/4 BSPPM - 9/16 JICM
4 WA115019 ELBOW FITTING 1 9/16 JICM - 1/4 BSPPM
5 WA103188 PIPE PLUG 1 1/4 BSPPM PLUG
6 WA115929 MANIFOLD 1 CASE DRAIN BLOCK
7 19M3136 CAP SCREW 2 M8 X 45
8 WA101140 WASHER 4 1/4 DOWTY -04
9 WA101547 WASHER 1 1/2 DOWTY -08
10 WA103517 WASHER 2 3/8 DOWTY -06

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 70-41

PN=209
 70-42
HYDRAULICS
LOWER KNIFE MANIFOLD
TX1080543 -UN-

THIS PARTS LISTING IS CONTINUED

70-42 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=210
 70-43
HYDRAULICS
LOWER KNIFE MANIFOLD

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA118952 O-RING 5 731-012N90-ORFS ID 0.364" (9.3 MM) X W 0.07"

(1.78 MM) (-06)
2 19M10086 SCREW 4 M5 X 80 - 12.9
3 WA106186 VALVE 1 VALVE CETOP 3 OPEN CENTER
4 WA117095 MANIFOLD 1
5 ........ BACK-UP RING 1 RED, SOLID
6 ........ O-RING 1
7 ........ O-RING 2
8 ........ BACK-UP RING 2 RED, SOLID
9 F351112 VALVE 1 VALVE PRES RED/REL
10 WA115768 ELBOW FITTING 2 11/16 ORFSM - 11/16 ORFSF 90 DEGREE
11 WA115767 ADAPTER 2 3/8 BSPPM - 11/16 ORFSM
12 WA110623 MANIFOLD 1
13 WA103517 WASHER 4 3/8" DOWTY (-06)
14 WA116431 ELBOW FITTING 1 3/8 BSPPM - 11/16 ORFSM 90 ELBOW
15 WA117091 ELBOW FITTING 1 3/4 JICM - 3/8 BSPPM
16 WA102596 SPRING WASHER 4
17 WA105108 SCREW 4 M5 X 30 - 12.9
18 WA116288 TEST DEVICE 1 1/4 BSPTM - M16 MCS MALE
19 WA116614 SEAL KIT 1
20 WA105576 ELECTRICAL COIL 2
21 ........ SHIM 1

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 70-43

PN=211
 70-44
HYDRAULICS
TILT CYLINDER HOSES
TX1073780 -UN-18MAR10

THIS PARTS LISTING IS CONTINUED

70-44 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=212
 70-45
HYDRAULICS
TILT CYLINDER HOSES

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA117263 HYDRAULIC HOSE 1 TILT - CYLINDER A

2 WA116010 HYDRAULIC HOSE 1 TILT - CYLINDER B
3 WA119014 HYDRAULIC HOSE 1 TILT - MANIFOLD BLOCK, (SUB FOR WA116456)

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 70-45

PN=213
 70-46
HYDRAULICS
UPPER DELIMB CYLINDER HOSES
TX1073781 -UN-18MAR10

THIS PARTS LISTING IS CONTINUED

70-46 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=214
 70-47
HYDRAULICS
UPPER DELIMB CYLINDER HOSES

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA116012 HYDRAULIC HOSE 1 UPPER DELIMB - CYLINDER A

2 WA116011 HYDRAULIC HOSE 1 UPPER DELIMB - CYLINDER B
3 WA116742 HOSE CLAMP 1 1/2" DOUBLE

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 70-47

PN=215
 70-48
HYDRAULICS
LOWER DELIMB CYLINDER HOSES
TX1060435 -UN-13JUL09

THIS PARTS LISTING IS CONTINUED

70-48 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=216
 70-49
HYDRAULICS
LOWER DELIMB CYLINDER HOSES

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA116019 HYDRAULIC HOSE 1 LOWER DELIMB - CYLINDER A

2 WA116021 HYDRAULIC HOSE 1 LOWER DELIMB PRESSURE SUPPLY
3 WA116020 HYDRAULIC HOSE 1 LOWER DELIMB - CYLINDER B

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 70-49

PN=217
 70-50
HYDRAULICS
FEED ARM HOSES
TX1060434 -UN-23JUN09

THIS PARTS LISTING IS CONTINUED

70-50 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=218
 70-51
HYDRAULICS
FEED ARM HOSES

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA116452 HYDRAULIC HOSE 1 R.H. FEED ARM - CYLINDER A

2 WA116454 HYDRAULIC HOSE 1 R.H. FEED ARM - CYLINDER B
3 WA116453 HYDRAULIC HOSE 1 L.H. FEED ARM - CYLINDER A
4 WA116452 HYDRAULIC HOSE 1 L.H. FEED ARM - CYLINDER B
5 WA116004 TEE FITTING 1 FEED ARM - PORT A
6 WA116001 TEE FITTING 1 FEED ARM - PORT B

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 70-51

PN=219
 70-52
HYDRAULICS
MEASURING HOSES
TX1059998 -UN-23JUN09

THIS PARTS LISTING IS CONTINUED

70-52 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=220
 70-53
HYDRAULICS
MEASURING HOSES

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA116013 HYDRAULIC HOSE 1 MEASURING - CLYINDER A

2 WA116015 TEE FITTING 1
3 WA116014 HYDRAULIC HOSE 1 MEASURING - CYLINDER B

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 70-53

PN=221
 70-54
HYDRAULICS
FEED MOTOR HOSES
TX1073782 -UN-16MAR10

THIS PARTS LISTING IS CONTINUED

70-54 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=222
 70-55
HYDRAULICS
FEED MOTOR HOSES

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA116455 HYDRAULIC HOSE 1 R.H. FIXED MANIFOLD TO L.H. FIXED MANIFOLD

2 WA116340 HYDRAULIC HOSE 1 R.H. DRIVE MOTOR (STRAIGHT MOTOR)
WA115994 HYDRAULIC HOSE 1 R.H. DRIVE MOTOR (ANGLED MOTOR)
3 WA116341 HYDRAULIC HOSE 1 R.H. DRIVE MOTOR (STRAIGHT MOTOR)
WA115990 HYDRAULIC HOSE 1 R.H. DRIVE MOTOR (ANGLED MOTOR)
4 WA115993 HYDRAULIC HOSE 1 R.H. FIXED DRIVE MOTOR
5 WA116028 HYDRAULIC HOSE 1 L.H. DRIVE MOTOR (STRAIGHT MOTOR)
WA116720 HYDRAULIC HOSE 1 L.H. DRIVE MOTOR (ANGLED MOTOR)
6 WA115992 HYDRAULIC HOSE 1 L.H. FIXED DRIVE MOTOR
7 WA116340 HYDRAULIC HOSE 1 L.H. DRIVE MOTOR (STRAIGHT MOTOR)
WA115995 HYDRAULIC HOSE 1 L.H. DRIVE MOTOR (ANGLED MOTOR)

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 70-55

PN=223
 70-56
HYDRAULICS
CASE DRAIN HOSES
TX1059996 -UN-13JUL09

THIS PARTS LISTING IS CONTINUED

70-56 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=224
 70-57
HYDRAULICS
CASE DRAIN HOSES

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA115999 HYDRAULIC HOSE 1 R.H. DRIVE MOTOR

2 WA115997 HYDRAULIC HOSE 1 R.H. FIXED DRIVE MOTOR
3 WA115985 HYDRAULIC HOSE 1 MAIN SAW MOTOR
WA116332 HYDRAULIC HOSE 1 MAIN SAW MOTOR (SUPER CUT 100)
4 WA116450 HYDRAULIC HOSE 1 L.H. DRIVE MOTOR (STRAIGHT MOTOR)
WA115996 HYDRAULIC HOSE 1 L.H. DRIVE MOTOR (ANGLED MOTOR)
5 WA115998 HYDRAULIC HOSE 1 L.H. FIXED DRIVE MOTOR
6 WA116000 HYDRAULIC HOSE 1 BLOCK TO MANIFOLD

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 70-57

PN=225
 70-58
HYDRAULICS
MAIN SAW HOSES
TX1060000 -UN-07JUL09

THIS PARTS LISTING IS CONTINUED

70-58 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=226
 70-59
HYDRAULICS
MAIN SAW HOSES

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA115983 HYDRAULIC HOSE 1 SAW MOTOR SUPPLY

2 WA115984 HYDRAULIC HOSE 1 SAW MOTOR RETURN
3 WA116746 HYDRAULIC HOSE 1 SAW BAR RETRACT
4 WA119013 HYDRAULIC HOSE 1 SAW BAR CUT, (SUB FOR WA115987)

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 70-59

PN=227
 70-60
HYDRAULICS
MAIN SAW HOSES (SUPER CUT 100)
TX1061399 -UN-13JUL09

THIS PARTS LISTING IS CONTINUED

70-60 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=228
 70-61
HYDRAULICS
MAIN SAW HOSES (SUPER CUT 100)

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA116747 HYDRAULIC HOSE 1 SAW MOTOR SUPPLY

2 WA116331 HYDRAULIC HOSE 1 SAW MOTOR RETURN
3 WA116745 HYDRAULIC HOSE 1 SAW BAR RETRACT
4 WA119012 HYDRAULIC HOSE 1 SAW BAR CUT, (SUB FOR WA116334)
5 WA116335 HYDRAULIC HOSE 1 SAW TENSION

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 70-61

PN=229
 70-62
HYDRAULICS
TOP SAW HOSES
TX1082793 -UN-

THIS PARTS LISTING IS CONTINUED

70-62 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=230
 70-63
HYDRAULICS
TOP SAW HOSES

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA116323 HYDRAULIC HOSE 1 SAW MOTOR RETURN

2 WA116326 HYDRAULIC HOSE 1 SAW BAR CUT
3 WA116327 HYDRAULIC HOSE 1 SAW BAR RETRACT
4 WA116324 HYDRAULIC HOSE 1 SAW MOTOR SUPPLY
5 WA116328 HYDRAULIC HOSE 1 SAW MOTOR CASE DRAIN
6 WA116748 HYDRAULIC HOSE 1 SAW RETRACT

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 70-63

PN=231
 70-64
HYDRAULICS
SWIVEL HOSES
TX1060002 -UN-09JUL09

THIS PARTS LISTING IS CONTINUED

70-64 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=232
 70-65
HYDRAULICS
SWIVEL HOSES

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA115979 HYDRAULIC HOSE 1 MAIN OIL SUPPLY

WA116007 HYDRAULIC HOSE 1 MAIN OIL SUPPLY (THROUGH HANGING BRACKET)
2 WA116018 HYDRAULIC HOSE 1 MAIN RETURN
WA116024 HYDRAULIC HOSE 1 MAIN RETURN (THROUGH HANGING BRACKET)
3 WA115981 HYDRAULIC HOSE 1 CASE DRAIN
WA116023 HYDRAULIC HOSE 1 CASE DRAIN (THROUGH HANGING BRACKET)
4 WA115980 HYDRAULIC HOSE 1 BOOM CABLE

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 70-65

PN=233
 70-66
HYDRAULICS
TOP SAW AND 3/4" MAIN SAW OILER HOSES
TX1076874 -UN-27APR10

THIS PARTS LISTING IS CONTINUED

70-66 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=234
 70-67
HYDRAULICS
TOP SAW AND 3/4" MAIN SAW OILER HOSES

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA116325 HYDRAULIC HOSE 1 TOP SAW

2 WA116325 HYDRAULIC HOSE 1 VALVE TO TANK
3 WA116325 HYDRAULIC HOSE 1 MAIN SAW
4 WA115989 HYDRAULIC HOSE 1 TANK TO VALVE
5 WA115978 HYDRAULIC HOSE 1 SWING ARM TO JOINER CONNECTION
6 WA116750 FITTING 1

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 70-67

PN=235
 70-68
HYDRAULICS
TOP SAW AND SUPER CUT 100 OILER HOSES
TX1061392 -UN-13JUL09

THIS PARTS LISTING IS CONTINUED

70-68 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=236
 70-69
HYDRAULICS
TOP SAW AND SUPER CUT 100 OILER HOSES

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA116325 HYDRAULIC HOSE 1 TOP SAW

2 WA115989 HYDRAULIC HOSE 1 PULSE OILER TO VALVE
3 WA116027 HYDRAULIC HOSE 1 SUPER CUT 100 SAW
4 WA116026 HYDRAULIC HOSE 1 CHAIN LUBE
5 WA116325 HYDRAULIC HOSE 1 PULSE OILER TO 32 END CAP

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 70-69

PN=237
 70-70
HYDRAULICS
NON TOP SAW AND 3/4" MAIN SAW OILER HOSES
TX1076871 -UN-23APR10

THIS PARTS LISTING IS CONTINUED

70-70 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=238
 70-71
HYDRAULICS
NON TOP SAW AND 3/4" MAIN SAW OILER HOSES

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA115989 HYDRAULIC HOSE 1 MAIN SAW

2 WA115978 HYDRAULIC HOSE 1 TANK TO VALVE

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 70-71

PN=239
 70-72
HYDRAULICS
HOSE EXAMPLE
TX1022388 -UN-24APR07

70-72 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)

PN=240
 70-73
HYDRAULICS
HYDRAULIC HOSE SPECIFICATIONS

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

.. WA115978 HYDRAULIC HOSE 1 JIC 7/16" - 0.780M LONG - 1/4"-6 SIZE/DIN -

300 PSI - 1 FIBRE BRAID - 1/8" BPP BANJO
1/4" PUSH LOCK
.. WA115979 HYDRAULIC HOSE 1 ORFS 1-7/16" STRAIGHT - 1.530M LONG - 1"-25
SIZE/DIN - 6000 PSI - 4 WIRE - ORFS 1-7/16"
45 DEG
.. WA115980 HYDRAULIC HOSE 1 JIC 1-1/16" STRAIGHT - 1.610M LONG - 3/4"-12
SIZE/DIN - 3100 PSI - 2 WIRE - JIC 1-1/16"
STRAIGHT
.. WA115981 HYDRAULIC HOSE 1 JIC 1-1/16" STRAIGHT - 1.600M LONG - 3/4"-12
SIZE/DIN - 3100 PSI - 2 WIRE - JIC 1-1/16"
45 DEG
.. WA115983 HYDRAULIC HOSE 1 JIC 3/4" STRAIGHT - 1.500M LONG - 3/4"-20
SIZE/DIN - 6000 PSI - 4 WIRE - ORFS 1-3/16"
LONG STRAIGHT
.. WA115984 HYDRAULIC HOSE 1 JIC 3/4" 45 DEG - 1.480M LONG - 3/4"-12
SIZE/DIN - 3100 PSI - 2 WIRE - ORFS 1-3/16"
LONG STRAIGHT
.. WA115985 HYDRAULIC HOSE 1 JIC 9/16" STRAIGHT - 1.230M LONG - 3/8"-10
SIZE/DIN - 3000 PSI - 2 WIRE - JIC 9/16" 90
DEG
.. WA115987 HYDRAULIC HOSE 1 JIC 9/16" 45 DEG - 1.220M LONG - 3/8"-10
SIZE/DIN - 3000 PSI - 2 WIRE - JIC 9/16"
STRAIGHT
.. WA115988 HYDRAULIC HOSE 1 JIC 9/16" STRAIGHT - 1.400M LONG - 3/8"-10
SIZE/DIN - 3000 PSI - 2 WIRE
.. WA115989 HYDRAULIC HOSE 1 JIC 7/16" 90 DEG - 0.780M LONG - 1/4"-6
SIZE/DIN - 3000 PSI - 2 WIRE - JIC 7/16"
STRAIGHT
.. WA115990 HYDRAULIC HOSE 1 ORFS 1-3/16" 90 DEG - 1.430M LONG - 3/4"-20
SIZE/DIN - 6000 PSI - 4 WIRE - ORFS 1-3/16"
LONG STRAIGHT
.. WA115992 HYDRAULIC HOSE 1 ORFS 1-3/16" STRAIGHT - 0.890M LONG - 3/4"-20
SIZE/DIN - 6000 PSI - 4 WIRE - ORFS 1-3/16"
90 DEG
.. WA115993 HYDRAULIC HOSE 1 ORFS 1-3/16" STRAIGHT - 0.780M LONG - 3/4"-20
SIZE/DIN - 6000 PSI - 4 WIRE - ORFS 1-3/16"
90 DEG
.. WA115994 HYDRAULIC HOSE 1 ORFS 1-3/16" STRAIGHT - 0.690M LONG - 3/4"
-20 SIZE/DIN - 6000 PSI - 4 WIRE - ORFS
1-3/16" LONG STRAIGHT
.. WA115995 HYDRAULIC HOSE 1 ORFS 1-3/16" STRAIGHT - 0.630M LONG - 3/4"
-20 SIZE/DIN - 6000 PSI - 4 WIRE - ORFS
1-3/16" LONG STRAIGHT
.. WA115996 HYDRAULIC HOSE 1 JIC 9/16" STRAIGHT - 1.450M LONG - 3/8" -10
SIZE/DIN - 3000 PSI - 2 WIRE - JIC 9/16"
STRAIGHT
.. WA115997 HYDRAULIC HOSE 1 JIC 9/16" STRAIGHT - 0.740M LONG - 3/8" -10
SIZE/DIN - 3000 PSI - 2 WIRE - JIC 9/16" 90
DEG
.. WA115998 HYDRAULIC HOSE 1 JIC 9/16" STRAIGHT - 0.970M LONG - 3/8" -10
SIZE/DIN - 3000 PSI - 2 WIRE - JIC 9/16"
STRAIGHT
.. WA115999 HYDRAULIC HOSE 1 JIC 9/16" STRAIGHT - 1.350M LONG - 3/8" -10
SIZE/DIN - 3000 PSI - 2 WIRE - JIC 9/16" 90
DEG
.. WA116000 HYDRAULIC HOSE 1 JIC 3/4" STRAIGHT - 0.650M LONG - 1/2" -12
SIZE/DIN - 4000 PSI - 2 WIRE - JIC 3/4"
STRAIGHT
.. WA116007 HYDRAULIC HOSE 1 ORFS 1-7/16" STRAIGHT - 1.800M LONG - 1" -25
SIZE/DIN - 6000 PSI - 4 WIRE - ORFS 1-7/16"
45 DEG
.. WA116009 HYDRAULIC HOSE 1 ORFS 11/16" 45 DEG - 0.905M LONG - 3/8" -8
SIZE/DIN - 4800 PSI - 2 WIRE - ORFS 11/16"
LONG STRAIGHT
.. WA116010 HYDRAULIC HOSE 1 ORFS 11/16" STRAIGHT - 1.200M LONG - 3/8" -8
SIZE/DIN - 4800 PSI - 2 WIRE - ORFS 11/16"
LONG STRAIGHT
.. WA116011 HYDRAULIC HOSE 1 ORFS 13/16" 90 DEG - 0.950M LONG - 1/2" -12
SIZE/DIN - 6000 PSI - 4 WIRE - ORFS 13/16"
SHORT STRAIGHT

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 70-73

PN=241
 70-74
HYDRAULICS
HYDRAULIC HOSE SPECIFICATIONS (CONTINUED)

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

.. WA116012 HYDRAULIC HOSE 1 ORFS 13/16" 90 DEG - 0.960M LONG - 1/2" -12
SIZE/DIN - 6000 PSI - 4 WIRE - ORFS 13/16"
SHORT STRAIGHT
.. WA116013 HYDRAULIC HOSE 1 JIC 9/16" STRAIGHT - 1.100M LONG - 3/8" -10
SIZE/DIN - 3000 PSI - 2 WIRE - JIC 9/16"
STRAIGHT
.. WA116014 HYDRAULIC HOSE 1 JIC 9/16" STRAIGHT - 0.590M LONG - 3/8" -10
SIZE/DIN - 3000 PSI - 2 WIRE - JIC 9/16"
STRAIGHT
.. WA116015 HYDRAULIC HOSE 1 JIC 9/16" STRAIGHT - 0.690M LONG - 3/8" -10
SIZE/DIN - 3000 PSI - 2 WIRE - JIC 9/16" 90
DEG
.. WA116016 HYDRAULIC HOSE 1 JIC 1-1/16" 90 DEG - 1.825M LONG - 3/4" -12
SIZE/DIN - 3100 PSI - 2 WIRE - JIC 1-1/16"
STRAIGHT
.. WA116017 HYDRAULIC HOSE 1 JIC 3/4" - 0.730M LONG - 3/8" -10 SIZE/DIN -
300 PSI - 1 FIBRE BRAID
.. WA116018 HYDRAULIC HOSE 1 JIC 1-5/8" STRAIGHT - 1.615M LONG - 1-1/4"-32
SIZE/DIN - 4000 PSI - 4 WIRE - JIC 1-5/8"
45 DEG
.. WA116019 HYDRAULIC HOSE 1 ORFS 11/16" 90 DEG - 1.000M LONG - 3/8" -10
SIZE/DIN - 3000 PSI - 2 WIRE - ORFS 11/16"
LONG STRAIGHT
.. WA116020 HYDRAULIC HOSE 1 ORFS 11/16" 90 DEG - 1.330M LONG - 3/8" -10
SIZE/DIN - 3000 PSI - 2 WIRE - ORFS 11/16"
LONG STRAIGHT
.. WA116021 HYDRAULIC HOSE 1 ORFS 11/16" STRAIGHT - 0.590M LONG - 3/8" -8
SIZE/DIN - 4800 PSI - 2 WIRE - ORFS 11/16"
90 DEG
.. WA116022 HYDRAULIC HOSE 1 JIC 3/4" STRAIGHT - 0.950M LONG - 1/2" -12
SIZE/DIN - 4000 PSI - 2 WIRE - JIC 3/4"
STRAIGHT
.. WA116023 HYDRAULIC HOSE 1 JIC 1-1/16" STRAIGHT - 1.900M LONG - 3/4"-12
SIZE/DIN - 3100 PSI - 2 WIRE - JIC 1-1/16"
45 DEG
.. WA116024 HYDRAULIC HOSE 1 JIC 1-5/8" STRAIGHT - 1.890M LONG - 1-1/4"-32
SIZE/DIN - 4000 PSI - 4 WIRE - JIC 1-5/8"
45 DEG
.. WA116026 HYDRAULIC HOSE 1 JIC 7/16" STRAIGHT - 0.840M LONG - 1/4"-6
SIZE/DIN - 3000 PSI - 2 WIRE - JIC 7/16"
STRAIGHT
.. WA116027 HYDRAULIC HOSE 1 JIC 9/16" STRAIGHT - 0.250M LONG - 3/8"-10
SIZE/DIN - 3000 PSI - 2 WIRE - JIC 9/16" 90
DEG
.. WA116028 HYDRAULIC HOSE 1 ORFS 1-3/16" STRAIGHT - 1.500M LONG - 3/4"-20
SIZE/DIN - 6000 PSI - 4 WIRE - ORFS 1-3/16"
90 DEG
.. WA116323 HYDRAULIC HOSE 1 ORFS 1" STRAIGHT - 0.640M LONG - 5/8"-16
SIZE/DIN - 3625 PSI - 2 WIRE - ORFS 1"
.. WA116324 HYDRAULIC HOSE 1 ORFS 1" STRAIGHT - 0.600M LONG - 5/8"-16
SIZE/DIN - 5000 PSI - 4 WIRE - ORFS 1" LONG
STRAIGHT
.. WA116325 HYDRAULIC HOSE 1 JIC 7/16" STRAIGHT - 1.070M LONG - 1/4"-6
SIZE/DIN - 3000 PSI - 2 WIRE - JIC 7/16"
STRAIGHT
.. WA116326 HYDRAULIC HOSE 1 JIC 7/16" STRAIGHT - 0.720M LONG - 1/4"-6
SIZE/DIN - 3000 PSI - 2 WIRE - JIC 7/16" 90
DEG
.. WA116327 HYDRAULIC HOSE 1 JIC 9/16" STRAIGHT - 1.030M LONG - 3/8"-10
SIZE/DIN - 3000 PSI - 2 WIRE - JIC 9/16" 90
DEG

70-74 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)

PN=242
 70-75
HYDRAULICS
HYDRAULIC HOSE SPECIFICATIONS (CONTINUED)

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

.. WA116328 HYDRAULIC HOSE 1 JIC 9/16" STRAIGHT - 0.550M LONG - 3/8"-10

SIZE/DIN - 3000 PSI - 2 WIRE - JIC 9/16"
STRAIGHT
.. WA116329 HYDRAULIC HOSE 1 JIC 3/4" - 0.950M LONG - 3/8"-10 SIZE/DIN -
300 PSI - 1 FIBRE BRAID
.. WA116331 HYDRAULIC HOSE 1 1 3/16" ORFS STRAIGHT SHORT STEM - 1.285 M
LONG - 3/4"-20 - 3100 PSI - 2 WIRE 1 3/16"
ORFS STRAIGHT SHORT STEM
.. WA116332 HYDRAULIC HOSE 1 JIC 9/16" STRAIGHT - 0.970M LONG - 3/8"-10
SIZE/DIN - 3000 PSI - 2 WIRE - JIC 9/16" 90
DEG
.. WA116334 HYDRAULIC HOSE 1 JIC 9/16" 45 DEG - 1.140M LONG - 3/8"-10
SIZE/DIN - 3000 PSI - 2 WIRE - JIC 9/16"
STRAIGHT
.. WA116335 HYDRAULIC HOSE 1 JIC 7/16" STRAIGHT - 1.500M LONG - 1/4"-6
SIZE/DIN - 3000 PSI - 2 WIRE - JIC 7/16"
STRAIGHT
.. WA116340 HYDRAULIC HOSE 1 ORFS 1-3/16" 90 DEG - 0.660M LONG - 3/4"-20
SIZE/DIN - 6000 PSI - 4 WIRE - ORFS 1-3/16"
LONG STRAIGHT
.. WA116341 HYDRAULIC HOSE 1 ORFS 1-3/16" STRAIGHT - 1.420M LONG - 3/4"-20
SIZE/DIN - 6000 PSI - 4 WIRE - ORFS 1-3/16"
90 DEG
.. WA116367 HYDRAULIC HOSE 1 JIC 9/16" STRAIGHT - 3/8"-10 SIZE/DIN - 3000
PSI - 2 WIRE - JIC 9/16" STRAIGHT
.. WA116450 HYDRAULIC HOSE 1 JIC 9/16" STRAIGHT - 1.570M LONG - 3/8"-10
SIZE/DIN - 3000 PSI - 2 WIRE - JIC 9/16"
STRAIGHT
.. WA116452 HYDRAULIC HOSE 1 ORFS 13/16" SHORT STRAIGHT - 1.350M LONG -
1/2"-12 SIZE/DIN - 6000 PSI - 4 WIRE - ORFS
13/16" 45 DEG
.. WA116453 HYDRAULIC HOSE 1 ORFS 13/16" SHORT STRAIGHT - 1.275M LONG -
1/2"-12 SIZE/DIN - 6000 PSI - 4 WIRE - ORFS
13/16" 90 DEG
.. WA116454 HYDRAULIC HOSE 1 ORFS 13/16" SHORT STRAIGHT - 1.210M LONG -
1/2"-12 SIZE/DIN - 6000 PSI - 4 WIRE - ORFS
13/16" 90 DEG
.. WA116455 HYDRAULIC HOSE 1 ORFS 11/16" STRAIGHT - 0.650M LONG - 3/8"-10
SIZE/DIN - 6000 PSI - 4 WIRE - ORFS 11/16"
LONG STRAIGHT
.. WA116456 HYDRAULIC HOSE 1 ORFS 11/16" STRAIGHT - 0.300M LONG - 3/8"-8
SIZE/DIN - 4800 PSI - 2 WIRE - ORFS 11/16"
90 DEG
.. WA116720 HYDRAULIC HOSE 1 ORFS 1-3/16" 90 DEG - 1.600M LONG - 3/4"-20
SIZE/DIN - 6000 PSI - 4 WIRE - ORFS 1-3/16"
LONG STRAIGHT
.. WA116745 HYDRAULIC HOSE 1 JIC 9/16" STRAIGHT - 0.820M LONG - 3/8"-10
SIZE/DIN - 3000 PSI - 2 WIRE - JIC 9/16"
STRAIGHT
.. WA116746 HYDRAULIC HOSE 1 JIC 9/16" STRAIGHT - 0.815M LONG - 3/8"-10
SIZE/DIN - 3000 PSI - 2 WIRE - JIC 9/16"
STRAIGHT
.. WA116747 HYDRAULIC HOSE 1 ORFS 1-3/16" STRAIGHT - 1.475M LONG - 3/4"-20
SIZE/DIN - 6000 PSI - 4 WIRE - ORFS 1-3/16"
LONG STRAIGHT
.. WA116748 HYDRAULIC HOSE 1 JIC 9/16" 90 DEG - 0.950M LONG - 3/8"-10
SIZE/DIN - 3000 PSI - 2 WIRE - JIC 9/16"
STRAIGHT
.. WA116749 HYDRAULIC HOSE 1 ORFS 1-3/16" STRAIGHT - 1.570M LONG - 3/4"-12
SIZE/DIN - 3100 PSI - 2 WIRE
.. WA119012 HYDRAULIC HOSE 1 JIC 9/16 STRAIGHT - 1.16 M LONG - 3/8 -10
SIZE/DIN - 3000 PSI - 2 WIRE - JIC 9/16
STRAIGHT
.. WA119013 HYDRAULIC HOSE 1 JIC 9/16 STRAIGHT - 1.24M LONG - 3/8 -10
SIZE/DIN - 3000 PSI - 2 WIRE - JIC 9/16
STRAIGHT
.. WA119014 HYDRAULIC HOSE 1 ORFS 11/16 STRAIGHT - 0.33M LONG - 3/8 -10
SIZE/DIN - 4800 PSI - 2 WIRE - ORFS 11/16
SWEPT 90 DEGREE

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 70-75

PN=243
 80-2
TOOLS
TOOL KIT
TX1022441A -UN-19APR07

THIS PARTS LISTING IS CONTINUED

80-2 WARATAH HTH616C HARVESTER PC10314 (17-JUL-09)
PN=244
 80-3
TOOLS
TOOL KIT

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

0 ........ TOOLBOX 1
.. F350501 TOOLBOX 1 AND TOOLS
.. WA116087 WRENCH 1 SPANNER 42MM A/F
.. F350608 LABEL 1 NAME PLATE
.. F350804 HOSE 1 1 METRE TEST
.. F351013 SET SCREW 1 UNC 7/16" X 31/2" SET G8
.. F351119 GAUGE 1 0-5800 PSI
.. F351120 GAUGE 1 0-800 PSI
.. F351121 ADAPTER FITTING 1 ASSEMBLY
.. WA102716 ADAPTER FITTING 1 TEST GAUGE
.. WA102907 RESTRICTOR 2
.. WA103073 BOLT 1 UNC 3/16" X 1/4"
.. WA103284 SEAL 1
.. F351140 INSTRUMENT 1 MUTIMETER
.. WA100294 SPRING 1 HANDLE PROPORTIONAL
.. WA100419 SAFETY SIGN 1
.. WA100478 O-RING 4
.. WA100674 O-RING 10 014N90
.. WA100683 SPRING 1 HANDLE ON/OFF
.. WA101140 WASHER 2 1/4" DOWTY
.. WA101344 O-RING 2 219N90
.. WA101539 O-RING 4 125N90
.. WA101547 WASHER 5 1/2" DOWTY
.. WA101844 NUT 3 UNC 5/8"G8
.. WA102207 SAFETY SIGN 1
.. WA102580 WASHER 1 5/8" HARDENED
.. WA102690 O-RING 2
.. WA102850 WASHER 2 3/4" DOWTY
.. WA102973 SAFETY SIGN 1
.. WA102979 O-RING 4 018N90
.. WA103142 TOOL 1 SERVICE, PVG120 RELIEF ADJUSTER
.. WA103517 WASHER 2 3/8" DOWTY
.. WA103524 O-RING 2
.. WA108597 STUD 1 5/8" UNC X 58 MM
.. F055297 TOOL 5 DEUTSCH PIN REMOVER

WARATAH HTH616C HARVESTER PC10314 (17-JUL-09) 80-3

PN=245
 80-4
TOOLS
TOOL BOX
TX1022442A -UN-19APR07

THIS PARTS LISTING IS CONTINUED

80-4 WARATAH HTH616C HARVESTER PC10314 (17-JUL-09)
PN=246
 80-5
TOOLS
TOOL BOX

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

0 F350501 TOOLBOX 1 AND TOOLS

1 ........ FILE 1 MILL SAW 1" & HANDLE
2 ........ WRENCH SET 1 SPANNER SET 11 PIECE METRIC ROE 7 TO 19MM
3 ........ WRENCH SET 1 SPANNER SET 11 PIECE IMPERIAL ROE 3/8" TO 1"
AF
4 ........ WRENCH 1 SPANNER 15/16 A/F ROE
5 ........ WRENCH 1 SPANNER 1" A/F
6 ........ WRENCH 1 SPANNER 1 1/16" A/F
7 ........ WRENCH 1 SPANNER 1 1/8" A/F
8 ........ WRENCH 1 SPANNER 1 1/4" A/F
9 ........ WRENCH 1 SPANNER M18
10 ........ WRENCH 1 SPANNER, 5/8" CROWSFOOT
11 ........ WRENCH 1 6" ADJUSTABLE
12 ........ WRENCH 1 10" ADJUSTABLE
13 ........ WRENCH 1 ALLEN KEY SET 016-2 IMPERIAL BALL POINT
14 ........ WRENCH 1 ALLEN KEY SET 004-3 METRIC
15 ........ WRENCH 1 ALLEN KEY 4MM T/BAR
16 ........ WRENCH 1 ALLEN KEY 6MM T/BAR
17 ........ PLIERS 1 1 PAIR 7" LINESMAN
18 ........ PLIERS 1 CIRCLIP P-1050
19 WA100916 SCREWDRIVER 1 TERMINAL 2.5 BLADE
20 ........ SCREWDRIVER 1 131-150 BLADE
21 ........ SCREWDRIVER 1 117-75 BLADE
22 ........ SCREWDRIVER 1 135-38 BLADE
23 ........ SCREWDRIVER 1 BLADE
24 ........ SCREWDRIVER 1 271-75 (3" PHILLIPS)
25 ........ SOCKET SET 1 SAE & METRIC 1/4", 3/8" & 1/2" DRIVE
26 ........ PIN 1 (1) LOCKING A 408+2.00 MTRS X 0.4MM DIA.
YELLOW NYLON CORD

NOTE 1: PIN LOCKING + YELLOW NYLON CORD IS SUPPLIED ATTACHED TO BODY.

WARATAH HTH616C HARVESTER PC10314 (17-JUL-09) 80-5

PN=247
 80-6
TOOLS
GUIDE TOOL
TX1040776A -UN-29OCT08

THIS PARTS LISTING IS CONTINUED

80-6 WARATAH HTH616C HARVESTER PC10314 (17-JUL-09)
PN=248
 80-7
TOOLS
GUIDE TOOL

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA109235 SPECIAL SERVICE TOOL 1

WARATAH HTH616C HARVESTER PC10314 (17-JUL-09) 80-7

PN=249
 80-8
TOOLS
SPECIAL SERVICE TOOLS
TX1059689 -UN-20MAY09

THIS PARTS LISTING IS CONTINUED

80-8 WARATAH HTH616C HARVESTER PC10314 (17-JUL-09)
PN=250
 80-9
TOOLS
SPECIAL SERVICE TOOLS

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 F435508 KEY 1 CHECK VALVE

2 F058715 TOOL 1
3 F058176 PULLER 1
4 F058174 TOOL 1
5 F058688 TOOL 1
6 F065064 PULLER 1 EXTRACTION TOOL
7 F058722 KIT 1 SPECIAL SERVICE TOOL

WARATAH HTH616C HARVESTER PC10314 (17-JUL-09) 80-9

PN=251
 90-2
DECALS
HARVESTER HEAD DECALS
TX1065742 -UN-12OCT09

THIS PARTS LISTING IS CONTINUED

90-2 WARATAH HTH616C HARVESTER PC10314 (11-MAY-10)
PN=252
 90-3
DECALS
HARVESTER HEAD DECALS

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA101514 LABEL 2 DANGER

2 WA102036 LABEL 2 WARNING
3 WA113003 LABEL 4 KEEP CLEAR/PINCH AREA
4 WA116298 LABEL 2 STRIP
5 WA100240 LABEL 5 DANGER
6 WA100335 LABEL 1 WARATAH
7 WA114407 LABEL 1 HTH616C (RIGHT HAND)
WA114406 LABEL 1 HTH616C (LEFT HAND)

WARATAH HTH616C HARVESTER PC10314 (11-MAY-10) 90-3

PN=253
 90-4
DECALS
HARVESTER CAB DECALS
TX1079268 -UN-

THIS PARTS LISTING IS CONTINUED

90-4 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)
PN=254
 90-5
DECALS
HARVESTER CAB DECALS

KEY PART NO. PART NAME QTY. SERIAL NO. REMARKS

1 WA115976 LABEL 1 WARNING (ENGLISH)

WA116344 LABEL 1 WARNING (FRENCH)
WA116345 LABEL 1 WARNING (PORTUGUESE)
WA116346 LABEL 1 WARNING (SPANISH)
WA116347 LABEL 1 WARNING (RUSSIAN)
WA116348 LABEL 1 WARNING (INDONESIAN)
WA116349 LABEL 1 WARNING (GERMAN)
2 WA102207 LABEL 1 WARNING (ENGLISH)
WA012039 LABEL 1 WARNING (FRENCH)
WA103973 LABEL 1 WARNING (PORTUGUESE)
WA107856 LABEL 1 WARNING (SPANISH)
WA108219 LABEL 1 WARNING (RUSSIAN)
WA118932 LABEL 1 WARNING (INDONESIAN)
3 WA100467 LABEL 1 KEY TAG (ENGLISH)
WA100512 LABEL 1 KEY TAG (FRENCH)
WA103971 LABEL 1 KEY TAG (PORTUGUESE)
WA107658 LABEL 1 KEY TAG (SPANISH)
WA118937 LABEL 1 KEY TAG (RUSSIAN)
WA118931 LABEL 1 KEY TAG (INDONESIAN)
4 WA102973 LABEL 1 WARNING (ENGLISH)
WA102620 LABEL 1 WARNING (FRENCH)
WA103968 LABEL 1 WARNING (PORTUGUESE)
WA107659 LABEL 1 WARNING (SPANISH)
WA108214 LABEL 1 WARNING (RUSSIAN)
WA118928 LABEL 1 WARNING (INDONESIAN)
5 WA115689 LABEL 1 WARNING (ENGLISH)
WA118953 LABEL 1 WARNING (FRENCH)
WA118955 LABEL 1 WARNING (PORTUGUESE)
WA118957 LABEL 1 WARNING (SPANISH)
WA118959 LABEL 1 WARNING (RUSSIAN)
WA118933 LABEL 1 WARNING (INDONESIAN)
6 WA115690 LABEL 1 WARNING (ENGLISH)
WA118954 LABEL 1 WARNING (FRENCH)
WA118956 LABEL 1 WARNING (PORTUGUESE)
WA118958 LABEL 1 WARNING (SPANISH)
WA118960 LABEL 1 WARNING (RUSSIAN)
WA118961 LABEL 1 WARNING (INDONESIAN)

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 90-5

PN=255
 90-6
DECALS
MEMORANDA

90-6 WARATAH HTH616C HARVESTER PC10314 (17-JUL-09)

PN=256
 100-1
WARATAH HTH616C HARVESTER
NUMERICAL INDEX

PART NO. KEY PAGE PART NO. KEY PAGE PART NO. KEY PAGE
AT350215 36 70-19 F056023 11 40-19 F067194 8 40-15
F003230 2 40-21 F056024 18 40-19 F071047 2 50-23
F003339 13 20-19 F056031 10 40-15 F071047 4 50-23
F003372 4 40-21 F056032 13 40-15 F073212 22 50-3
F003532 4 20-53 F056033 12 40-15 F114468 18 40-17
F003565 14 20-27 F056034 4 40-13 F350040 7 20-15
F003569 28 20-25 F056034 11 40-15 F350060 9 60-3
F004568 9 40-19 F056039 9 40-15 F350061 8 50-3
F004573 6 40-19 F056042 1 50-23 F350061 11 50-5
F005170 22 40-17 F056044 10 40-19 F350104 8 20-23
F005634 17 40-17 F056045 24 40-15 F350188 15 20-25
F008355 20 40-17 F056046 13 40-17 F350189 17 20-25
F008646 16 20-17 F056047 16 40-19 F350282 4 40-27
F008646 16 20-19 F056047 5 50-23 F350284 18 40-5
F008646 1 20-31 F056048 17 40-15 F350315 12 40-5
F008646 14 20-43 F056049 19 40-15 F350315 5 40-7
F008646 14 20-53 F056050 34 40-15 F350340 5 40-5
F010726 6 40-17 F056050 4 40-17 F350341 17 40-5
F010829 10 40-13 F056051 3 40-19 F350347 15 40-5
F010829 12 40-19 F057306 16 50-3 F350348 16 40-5
F011293 21 40-15 F0574262 1 40-13 F350386 4 50-15
F013913 29 40-15 F057427 15 40-15 F350398 16 20-37
F014904 5 40-27 F057429 14 40-19 F350413 24 20-37
F014904 14 40-33 F057430 7 40-19 F350413 30 20-37
F018811 5 40-15 F057431 30 40-15 F350420 12 20-31
F022641 7 40-15 F057431 1 40-17 F350425 23 20-43
F022700 2 40-15 F057432 16 40-15 F350428 7 20-31
F026743 20 40-15 F057433 18 40-15 F350429 5 20-17
F0284036 6 50-5 F057434 32 40-15 F350429 12 20-19
F033852 2 50-11 F057754 3 40-13 F350429 9 20-31
F034301 7 40-21 F057755 6 40-15 F350429 1 20-53
F034302 7 40-21 F057757 6 50-23 F350440 2 20-11
F034945 16 20-41 F057758 3 50-23 F350476 3 20-11
F034945 11 30-5 F058174 4 80-9 F350476 2 20-13
F034945 11 30-11 F058176 3 80-9 F350496 1 20-7
F035014 3 40-21 F058688 5 80-9 F350501 .. 80-3
F046098 8 40-21 F058715 2 80-9 F350501 0 80-5
F052693 20 50-3 F058722 7 80-9 F350510 1 40-23
F052837 13 40-19 F058839 15 40-17 F350523 4 70-3
F053688 17 50-3 F058841 7 40-17 F350523 4 70-5
F053689 19 50-3 F058843 10 40-17 F350525 6 70-3
F055284 14 50-3 F058845 9 40-17 F350525 6 70-5
F055285 27 50-3 F058847 16 40-17 F350526 5 70-3
F055286 13 50-3 F058848 11 40-17 F350526 5 70-5
F055287 28 50-3 F058849 19 40-17 F350606 6 40-29
F055290 15 50-3 F058850 21 40-17 F350608 8 20-25
F055290 .. 50-44 F058851 23 40-17 F350608 .. 80-3
F055290 .. 50-45 F058983 6 40-21 F350617 4 60-3
F055297 .. 80-3 F059548 2 40-13 F350651 1 50-15
F056004 14 40-17 F061582 14 40-15 F350652 2 50-15
F056005 31 40-15 F061583 1 40-21 F350656 8 50-15
F056005 2 40-17 F061584 9 40-21 F350804 .. 80-3
F056007 33 40-15 F061680 12 40-17 F350806 22 40-29
F056007 5 40-17 F061682 3 40-17 F350806 14 70-3
F056009 22 40-15 F062033 17 40-19 F350806 14 70-5
F056011 25 40-15 F062219 12 40-17 F351002 9 50-15
F056012 23 40-15 F062513 12 40-17 F351008 3 50-15
F056013 27 40-15 F062514 8 40-17 F351013 .. 80-3
F056014 28 40-15 F062515 12 40-17 F351016 7 20-25
F056015 1 40-19 F062656 4 40-19 F351019 20 40-5
F056016 26 40-15 F062711 7 40-13 F351020 22 40-5
F056018 8 40-19 F062711 2 40-19 F351025 4 20-11
F056019 21 40-19 F063884 1 40-15 F351025 4 20-13
F056020 5 40-19 F065064 6 80-9 F351025 5 20-15
F056021 19 40-19 F065193 1 50-7 F351025 7 20-23
F056022 20 40-19 F067033 6 50-17 F351028 9 20-15
F056023 8 40-13 F067033 13 50-19 F351031 2 20-7

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 100-1

PN=257
 100-2
WARATAH HTH616C HARVESTER
NUMERICAL INDEX - CONTINUED

PART NO. KEY PAGE PART NO. KEY PAGE PART NO. KEY PAGE
F351031 2 20-9 WA100138 4 40-35 WA100714 1 40-35
F351031 1 20-15 WA100161 9 50-9 WA100727 4 50-9
F351031 5 30-3 WA100184 7 20-11 WA100727 4 50-11
F351031 5 30-5 WA100184 7 20-13 WA100740 9 20-41
F351031 6 30-7 WA100184 17 30-3 WA100772 .. 40-29
F351031 5 30-9 WA100184 8 40-3 WA100799 1 70-23
F351031 6 30-11 WA100213 6 40-7 WA100820 6 20-17
F351031 5 30-13 WA100213 5 40-23 WA100820 7 20-19
F351031 6 30-15 WA100213 2 50-13 WA100820 21 20-25
F351031 9 40-3 WA100221 8 20-11 WA100820 3 20-31
F351031 9 40-29 WA100221 8 20-13 WA100820 1 20-43
F351037 4 40-7 WA100221 14 20-25 WA100820 3 20-53
F351038 11 40-33 WA100221 1 40-5 WA100826 1 50-13
F351039 15 70-3 WA100240 13 20-25 WA100837 11 20-19
F351039 15 70-5 WA100240 5 90-3 WA100838 11 50-3
F351043 5 50-15 WA100249 9 20-45 WA100838 .. 50-34
F351044 17 40-13 WA100253 20 20-19 WA100838 .. 50-35
F351045 2 20-41 WA100294 .. 80-3 WA100838 .. 50-44
F351046 21 20-43 WA100335 6 90-3 WA100838 .. 50-45
F351049 7 40-3 WA100357 15 50-9 WA100839 9 20-33
F351059 15 20-23 WA100397 21 50-9 WA100862 16 70-23
F351059 20 20-53 WA100418 4 70-13 WA100866 6 20-37
F351059 19 40-29 WA100418 4 70-17 WA100916 19 80-5
F351067 12 70-13 WA100419 .. 80-3 WA100924 29 20-31
F351067 12 70-15 WA100424 5 40-3 WA100928 14 40-5
F351074 13 70-15 WA100425 3 50-5 WA100934 .. 20-19
F351075 14 70-13 WA100426 15 20-17 WA100951 11 70-15
F351076 6 50-25 WA100426 15 20-19 WA100977 9 20-19
F351078 3 70-35 WA100426 2 20-31 WA101022 8 70-3
F351078 3 70-37 WA100426 27 20-31 WA101022 8 70-5
F351094 5 20-11 WA100426 25 20-37 WA101038 31 20-37
F351094 5 20-13 WA100426 15 20-43 WA101038 10 60-3
F351094 9 70-39 WA100426 2 20-53 WA101097 5 30-7
F351112 6 70-19 WA100426 15 20-53 WA101097 5 30-15
F351112 9 70-43 WA100426 11 40-21 WA101101 21 50-11
F351119 .. 80-3 WA100426 13 40-29 WA101108 4 30-15
F351120 .. 80-3 WA100426 3 50-3 WA101112 12 20-41
F351121 .. 80-3 WA100426 25 50-3 WA101121 23 40-29
F351122 2 70-3 WA100426 2 50-7 WA101121 13 70-3
F351122 2 70-5 WA100426 11 60-3 WA101121 13 70-5
F351132 4 20-37 WA100467 3 90-5 WA101135 2 70-9
F351137 2 50-5 WA100478 .. 80-3 WA101135 2 70-11
F351137 3 50-11 WA100491 3 40-5 WA101135 1 70-21
F351139 5 50-13 WA100499 5 40-33 WA101135 4 70-23
F351139 5 50-25 WA100512 3 90-5 WA101135 9 70-31
F351140 .. 80-3 WA100529 20 20-41 WA101135 9 70-33
F35116 17 70-23 WA100538 8 40-5 WA101135 4 70-35
F434971 15 40-19 WA100564 .. 50-34 WA101135 4 70-37
F434977 16 40-15 WA100564 .. 50-35 WA101135 6 70-39
F435508 1 80-9 WA100564 .. 50-44 WA101136 5 50-13
F435664 37 70-19 WA100564 .. 50-45 WA101136 5 50-25
WA012039 2 90-5 WA100564 7 50-49 WA101139 17 20-41
WA100033 21 20-41 WA100565 23 70-21 WA101140 22 20-41
WA100040 13 70-23 WA100569 7 40-5 WA101140 5 20-47
WA100044 6 20-11 WA100576 5 40-13 WA101140 10 20-49
WA100044 6 20-13 WA100589 1 40-9 WA101140 21 40-13
WA100044 12 20-17 WA100603 10 40-29 WA101140 8 40-25
WA100044 19 20-25 WA100648 17 20-37 WA101140 6 40-35
WA100044 7 40-27 WA100648 19 30-11 WA101140 15 70-11
WA100060 5 50-9 WA100648 23 40-5 WA101140 17 70-13
WA100064 4 20-47 WA100661 4 30-3 WA101140 9 70-15
WA100064 5 20-49 WA100674 31 20-31 WA101140 8 70-21
WA100064 18 70-25 WA100674 25 20-43 WA101140 9 70-23
WA100064 17 70-27 WA100674 15 70-13 WA101140 13 70-35
WA100064 16 70-29 WA100674 16 70-15 WA101140 13 70-37
WA100086 15 20-31 WA100674 .. 80-3 WA101140 5 70-39
WA100098 12 50-9 WA100683 .. 80-3 WA101140 8 70-41

100-2 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)

PN=258
 100-3
WARATAH HTH616C HARVESTER
NUMERICAL INDEX - CONTINUED

PART NO. KEY PAGE PART NO. KEY PAGE PART NO. KEY PAGE
WA101140 .. 80-3 WA101571 11 20-37 WA102195 4 30-7
WA101141 11 40-13 WA101572 16 50-9 WA102195 4 30-9
WA101141 1 40-27 WA101601 3 70-39 WA102195 4 30-13
WA101141 24 40-29 WA101639 5 40-25 WA102207 .. 80-3
WA101141 3 70-23 WA101639 8 40-35 WA102207 2 90-5
WA101153 10 50-9 WA101639 12 40-35 WA102211 13 50-15
WA101153 5 50-11 WA101651 18 30-11 WA102211 2 50-19
WA101169 3 20-35 WA101652 2 70-13 WA102211 5 50-21
WA101173 12 50-3 WA101652 2 70-15 WA102244 13 20-17
WA101173 .. 50-34 WA101652 2 70-17 WA102244 2 20-23
WA101173 .. 50-35 WA101652 3 70-25 WA102244 24 20-31
WA101173 .. 50-44 WA101652 3 70-27 WA102244 6 20-43
WA101173 .. 50-45 WA101652 3 70-29 WA102244 13 40-5
WA101173 7 50-49 WA101672 8 50-9 WA102244 3 40-27
WA101207 7 20-45 WA101677 20 70-21 WA102254 6 40-25
WA101253 7 20-37 WA101716 7 40-11 WA102254 13 40-35
WA101259 12 20-45 WA101754 12 50-3 WA102278 2 50-9
WA101263 3 50-9 WA101754 8 50-49 WA102302 26 20-31
WA101263 6 50-11 WA101777 1 70-41 WA102302 26 20-37
WA101270 18 20-41 WA101794 6 70-15 WA102302 4 20-53
WA101292 13 50-9 WA101833 22 20-37 WA102302 24 50-3
WA101292 19 50-9 WA101833 19 20-45 WA102398 5 40-11
WA101307 6 40-5 WA101835 1 40-3 WA102403 7 40-35
WA101313 15 20-41 WA101835 3 70-11 WA102417 7 50-3
WA101342 4 50-25 WA101837 7 50-11 WA102417 10 50-5
WA101344 .. 80-3 WA101844 .. 80-3 WA102433 14 70-23
WA101346 6 20-15 WA101868 12 20-37 WA102464 14 40-29
WA101353 6 40-31 WA101868 1 20-39 WA102499 8 40-11
WA101356 4 20-23 WA101886 10 20-45 WA102499 9 40-11
WA101356 2 20-33 WA101912 5 50-5 WA102499 14 40-27
WA101356 5 20-33 WA101931 6 70-13 WA102525 26 50-3
WA101356 8 20-33 WA101941 18 50-9 WA102525 3 50-7
WA101356 2 20-35 WA101955 5 20-37 WA102525 3 50-25
WA101356 5 20-35 WA101959 1 40-29 WA102525 14 60-3
WA101356 8 20-35 WA101970 4 20-41 WA102540 10 20-17
WA101356 2 20-37 WA101977 18 50-3 WA102540 14 20-19
WA101356 11 20-41 WA101977 22 50-9 WA102540 25 20-31
WA101356 4 20-45 WA101977 .. 50-34 WA102555 11 20-11
WA101356 14 20-45 WA101977 .. 50-35 WA102555 11 20-13
WA101356 1 20-55 WA101977 .. 50-44 WA102555 2 20-25
WA101361 1 70-11 WA101977 .. 50-45 WA102555 7 20-27
WA101361 11 70-23 WA101977 9 50-49 WA102555 18 20-37
WA101374 14 20-17 WA101988 10 20-11 WA102555 2 20-45
WA101374 6 20-19 WA101988 10 20-13 WA102555 2 40-5
WA101374 6 20-23 WA102019 8 20-15 WA102555 11 40-5
WA101381 1 20-3 WA102022 12 20-15 WA102555 24 40-5
WA101387 4 20-7 WA102036 2 90-3 WA102555 10 40-11
WA101415 1 70-19 WA102059 5 40-35 WA102555 12 40-27
WA101415 7 70-31 WA102076 20 20-37 WA102555 16 40-29
WA101415 7 70-33 WA102090 7 70-13 WA102555 6 50-3
WA101418 0 20-33 WA102090 7 70-15 WA102555 9 50-5
WA101458 6 40-11 WA102090 7 70-17 WA102555 7 60-3
WA101514 1 90-3 WA102090 11 70-25 WA102555 11 70-3
WA101518 11 50-9 WA102090 11 70-27 WA102555 11 70-5
WA101539 14 20-41 WA102090 11 70-29 WA102556 9 50-3
WA101539 .. 80-3 WA102097 14 20-23 WA102556 17 50-9
WA101547 17 20-23 WA102097 19 20-53 WA102571 14 50-5
WA101547 30 20-31 WA102097 15 40-3 WA102573 13 70-11
WA101547 24 20-43 WA102097 18 40-29 WA102573 5 70-23
WA101547 22 20-53 WA102143 11 20-15 WA102579 4 50-5
WA101547 10 70-13 WA102143 6 20-47 WA102580 12 30-5
WA101547 10 70-15 WA102143 8 20-49 WA102580 12 30-11
WA101547 10 70-17 WA102143 21 70-21 WA102580 21 40-5
WA101547 6 70-21 WA102173 12 70-3 WA102580 2 40-31
WA101547 7 70-23 WA102173 12 70-5 WA102580 .. 80-3
WA101547 9 70-41 WA102175 1 50-9 WA102583 9 40-35
WA101547 .. 80-3 WA102195 4 30-5 WA102596 16 70-43

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 100-3

PN=259
 100-4
WARATAH HTH616C HARVESTER
NUMERICAL INDEX - CONTINUED

PART NO. KEY PAGE PART NO. KEY PAGE PART NO. KEY PAGE
WA102600 11 40-3 WA102936 8 40-33 WA103407 9 40-33
WA102600 5 70-11 WA102945 7 40-33 WA103415 7 40-21
WA102600 13 70-31 WA102955 10 20-19 WA103439 6 20-45
WA102600 13 70-33 WA102957 3 20-17 WA103439 7 40-7
WA102600 10 70-35 WA102964 19 40-5 WA103443 6 30-3
WA102600 10 70-37 WA102973 .. 80-3 WA103458 16 20-23
WA102607 7 50-15 WA102973 4 90-5 WA103470 3 40-35
WA102610 14 70-15 WA102979 1 20-41 WA103474 2 40-27
WA102620 4 90-5 WA102979 7 20-47 WA103479 12 50-11
WA102641 19 20-41 WA102979 9 20-49 WA103497 6 20-35
WA102654 7 20-17 WA102979 20 40-13 WA103505 8 40-31
WA102654 8 20-19 WA102979 17 70-11 WA103511 10 70-3
WA102654 26 20-25 WA102979 16 70-25 WA103511 10 70-5
WA102654 5 20-31 WA102979 18 70-27 WA103517 32 20-37
WA102654 2 20-43 WA102979 15 70-29 WA103517 23 20-41
WA102654 5 20-53 WA102979 .. 80-3 WA103517 13 40-3
WA102654 7 70-3 WA103026 13 40-33 WA103517 18 40-13
WA102654 7 70-5 WA103051 15 70-23 WA103517 9 40-25
WA102659 10 20-15 WA103072 17 40-29 WA103517 17 40-27
WA102686 7 50-9 WA103073 .. 80-3 WA103517 16 70-11
WA102687 8 50-11 WA103100 5 20-41 WA103517 16 70-21
WA102690 14 20-15 WA103100 15 40-13 WA103517 19 70-23
WA102690 9 70-21 WA103100 17 70-25 WA103517 16 70-31
WA102690 .. 80-3 WA103100 15 70-27 WA103517 16 70-33
WA102701 13 20-11 WA103100 13 70-29 WA103517 10 70-41
WA102701 13 20-13 WA103101 18 20-25 WA103517 13 70-43
WA102716 .. 80-3 WA103101 9 20-27 WA103517 .. 80-3
WA102789 8 70-23 WA103101 8 40-27 WA103524 .. 80-3
WA102815 2 40-35 WA103123 10 50-11 WA103543 4 40-23
WA102822 25 40-5 WA103128 11 50-11 WA103543 10 40-35
WA102823 6 50-9 WA103142 .. 80-3 WA103571 19 20-37
WA102823 9 50-11 WA103149 3 40-23 WA103579 2 40-23
WA102832 1 20-25 WA103149 3 40-25 WA103589 8 20-31
WA102832 6 20-27 WA103149 11 40-35 WA103594 5 40-21
WA102832 13 20-27 WA103151 2 70-29 WA103595 3 40-5
WA102832 5 50-3 WA103154 4 70-39 WA103595 7 40-9
WA102832 8 50-5 WA103169 15 40-29 WA103606 3 70-9
WA102837 8 20-45 WA103186 1 70-17 WA103606 11 70-19
WA102837 13 50-5 WA103186 1 70-29 WA103606 1 70-31
WA102842 3 70-13 WA103188 14 70-11 WA103606 1 70-33
WA102842 3 70-15 WA103188 5 70-41 WA103606 1 70-35
WA102842 3 70-17 WA103215 .. 50-34 WA103606 1 70-37
WA102842 20 70-23 WA103215 .. 50-35 WA103822 6 40-3
WA102850 3 20-41 WA103215 .. 50-44 WA103826 10 40-33
WA102850 4 40-3 WA103215 .. 50-45 WA103968 4 90-5
WA102850 19 40-13 WA103217 14 40-3 WA103971 3 90-5
WA102850 19 70-11 WA103217 10 70-31 WA103973 2 90-5
WA102850 2 70-21 WA103217 10 70-33 WA104049 4 20-39
WA102850 14 70-25 WA103217 8 70-35 WA104404 8 70-13
WA102850 14 70-27 WA103217 8 70-37 WA104404 4 70-15
WA102850 14 70-29 WA103284 .. 80-3 WA104404 8 70-17
WA102850 17 70-31 WA103289 20 50-9 WA104404 12 70-25
WA102850 17 70-33 WA103290 6 20-31 WA104404 12 70-27
WA102850 14 70-35 WA103305 1 40-31 WA104404 9 70-29
WA102850 14 70-37 WA103344 27 20-37 WA104708 6 40-33
WA102850 .. 80-3 WA103344 2 40-3 WA104783 10 40-5
WA102853 8 20-41 WA103344 12 40-3 WA104933 15 60-3
WA102853 3 20-47 WA103344 12 40-13 WA104991 1 20-5
WA102853 4 20-49 WA103344 16 40-13 WA104991 5 20-9
WA102853 13 40-13 WA103344 7 40-23 WA105024 29 20-37
WA102853 2 70-23 WA103344 7 40-25 WA105062 9 40-5
WA102853 2 70-35 WA103344 16 40-27 WA105108 14 50-9
WA102853 2 70-37 WA103344 18 70-23 WA105108 17 70-43
WA102853 3 70-41 WA103344 2 70-31 WA105109 4 20-9
WA102872 11 40-29 WA103344 2 70-33 WA105114 1 20-9
WA102907 .. 80-3 WA103344 2 70-41 WA105122 4 50-7
WA102933 7 40-29 WA103349 11 20-45 WA105462 7 50-5

100-4 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)

PN=260
 100-5
WARATAH HTH616C HARVESTER
NUMERICAL INDEX - CONTINUED

PART NO. KEY PAGE PART NO. KEY PAGE PART NO. KEY PAGE
WA105576 20 70-43 WA108454 4 20-17 WA110048 3 50-51
WA105700 7 20-33 WA108454 3 20-19 WA110048 2 50-53
WA105700 7 20-35 WA108454 14 20-31 WA110048 3 50-53
WA105882 17 70-19 WA108463 3 40-29 WA110048 2 50-55
WA105883 4 70-11 WA108472 3 40-15 WA110048 3 50-55
WA106107 18 20-19 WA108477 20 40-29 WA110216 3 20-15
WA106125 8 40-29 WA108597 .. 80-3 WA110243 33 70-19
WA106146 12 40-29 WA109010 0 30-3 WA110243 15 70-31
WA106149 2 50-25 WA109014 0 30-7 WA110243 15 70-33
WA106162 19 20-19 WA109031 10 30-3 WA110266 4 40-15
WA106186 3 70-43 WA109032 16 30-7 WA110311 13 20-43
WA106243 4 40-11 WA109032 16 30-15 WA110311 15 20-45
WA106245 3 40-3 WA109066 18 20-11 WA110438 15 20-31
WA106369 28 20-37 WA109066 18 20-13 WA110438 8 20-53
WA106371 9 20-17 WA109147 2 40-29 WA110442 13 50-11
WA106371 4 20-19 WA109154 1 30-3 WA110446 14 50-11
WA106371 3 20-23 WA109158 1 30-7 WA110528 17 20-11
WA106371 11 20-31 WA109162 1 30-11 WA110528 17 20-13
WA106371 7 20-43 WA109175 16 30-3 WA110566 2 20-15
WA106371 6 20-53 WA109176 9 30-7 WA110581 23 50-3
WA106532 11 40-11 WA109176 9 30-15 WA110583 11 20-25
WA106573 15 40-27 WA109177 9 30-5 WA110623 12 70-43
WA106583 17 20-19 WA109177 8 30-9 WA110636 23 20-11
WA106621 1 40-7 WA109177 9 30-11 WA110656 3 20-3
WA106622 2 40-7 WA109177 9 30-13 WA110656 3 20-5
WA106623 2 40-7 WA109205 8 30-3 WA110656 13 20-15
WA106624 2 40-7 WA109206 8 30-7 WA110673 3 50-13
WA106625 3 40-7 WA109206 8 30-15 WA110683 7 50-17
WA106626 8 40-7 WA109207 8 30-5 WA110683 8 50-19
WA106742 2 40-11 WA109207 7 30-9 WA110692 29 50-3
WA106742 6 40-23 WA109207 8 30-11 WA110699 4 40-5
WA106743 1 20-37 WA109207 8 30-13 WA110728 4 50-3
WA106749 13 20-31 WA109210 2 30-3 WA110730 20 20-11
WA106749 10 20-33 WA109212 2 30-15 WA110730 20 20-13
WA106749 10 20-35 WA109214 2 30-7 WA110739 1 50-5
WA106886 10 50-17 WA109218 2 30-11 WA110785 15 40-33
WA106886 11 50-19 WA109235 1 80-7 WA111185 22 20-43
WA106888 11 50-17 WA109290 1 40-11 WA111319 2 50-23
WA106888 14 50-19 WA109290 13 40-27 WA111522 1 60-3
WA106895 21 50-3 WA109296 12 40-33 WA111782 0 60-3
WA107259 13 20-37 WA109297 7 20-53 WA111808 3 60-3
WA107259 2 20-39 WA109308 10 20-47 WA111810 8 60-3
WA107259 9 20-39 WA109308 13 20-49 WA111831 15 50-11
WA107441 14 20-37 WA109513 19 20-11 WA111982 2 20-47
WA107442 3 20-37 WA109513 19 20-13 WA111982 3 20-49
WA107503 15 20-37 WA109516 8 20-39 WA111985 6 20-49
WA107548 1 70-13 WA109551 5 30-11 WA112035 11 20-23
WA107548 1 70-15 WA109552 4 30-11 WA112035 1 20-33
WA107548 1 70-25 WA109637 21 20-11 WA112035 4 20-33
WA107548 1 70-27 WA109637 21 20-13 WA112035 1 20-35
WA107631 5 20-45 WA109638 22 20-11 WA112035 4 20-35
WA107658 3 90-5 WA109638 22 20-13 WA112035 13 20-45
WA107659 4 90-5 WA109641 15 20-41 WA112319 6 40-27
WA107664 9 20-37 WA109648 1 20-47 WA112531 12 70-19
WA107666 10 20-37 WA109648 1 20-49 WA112533 21 70-19
WA107674 15 20-11 WA109651 1 20-47 WA112773 2 20-51
WA107674 15 20-13 WA109651 1 20-49 WA112774 1 20-51
WA107760 16 20-11 WA109705 9 70-3 WA112809 31 70-19
WA107760 16 20-13 WA109705 9 70-5 WA112869 5 20-25
WA107856 2 90-5 WA109707 9 20-11 WA112934 5 40-31
WA108160 3 20-25 WA109707 9 20-13 WA112935 3 40-31
WA108161 4 20-25 WA109709 9 20-11 WA112936 4 40-31
WA108191 2 20-3 WA109709 9 20-13 WA112937 7 40-31
WA108214 4 90-5 WA109726 9 20-47 WA112971 15 70-25
WA108219 2 90-5 WA109726 12 20-49 WA112971 16 70-27
WA108437 9 40-13 WA109781 6 20-39 WA113003 12 20-23
WA108441 4 40-29 WA110048 2 50-51 WA113003 3 90-3

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 100-5

PN=261
 100-6
WARATAH HTH616C HARVESTER
NUMERICAL INDEX - CONTINUED

PART NO. KEY PAGE PART NO. KEY PAGE PART NO. KEY PAGE
WA113007 .. 50-34 WA114768 14 70-33 WA115981 .. 70-73
WA113007 .. 50-35 WA114768 12 70-35 WA115983 1 70-59
WA113007 .. 50-44 WA114768 12 70-37 WA115983 .. 70-73
WA113007 .. 50-45 WA114819 6 40-13 WA115984 2 70-59
WA113007 9 50-49 WA114826 10 50-3 WA115984 .. 70-73
WA113094 4 40-25 WA114826 12 50-5 WA115985 3 70-57
WA113095 10 40-25 WA115019 7 20-49 WA115985 .. 70-73
WA113096 2 40-25 WA115019 14 40-13 WA115987 4 70-59
WA113097 1 40-25 WA115019 12 70-23 WA115987 .. 70-73
WA113098 9 50-17 WA115019 4 70-41 WA115988 5 50-51
WA113098 7 50-19 WA115021 5 60-3 WA115988 5 50-53
WA113179 20 20-43 WA115023 12 60-3 WA115988 5 50-55
WA113273 3 20-45 WA115024 2 60-3 WA115988 .. 70-73
WA113309 23 70-19 WA115025 13 60-3 WA115989 4 70-67
WA113413 28 20-31 WA115088 38 70-19 WA115989 2 70-69
WA113621 3 20-45 WA115090 13 70-19 WA115989 1 70-71
WA113622 17 20-45 WA115252 11 50-15 WA115989 .. 70-73
WA113644 4 50-17 WA115252 4 50-19 WA115990 3 70-55
WA113645 3 50-17 WA115252 6 50-21 WA115990 .. 70-73
WA113645 5 50-19 WA115253 12 50-15 WA115992 6 70-55
WA113665 9 20-53 WA115254 14 50-15 WA115992 .. 70-73
WA113665 4 20-55 WA115254 3 50-19 WA115993 4 70-55
WA113667 2 20-55 WA115267 9 50-21 WA115993 .. 70-73
WA113680 3 40-11 WA115268 6 50-15 WA115994 2 70-55
WA113686 1 30-5 WA115269 10 50-15 WA115994 .. 70-73
WA113687 17 30-5 WA115269 2 50-21 WA115995 7 70-55
WA113688 6 30-5 WA115285 5 50-17 WA115995 .. 70-73
WA113689 0 30-9 WA115285 6 50-19 WA115996 4 70-57
WA113690 1 30-9 WA115656 0 30-15 WA115996 .. 70-73
WA113691 2 30-9 WA115658 5 40-29 WA115997 2 70-57
WA113703 17 20-43 WA115661 1 30-15 WA115997 .. 70-73
WA113703 16 20-45 WA115689 5 90-5 WA115998 5 70-57
WA113706 16 20-43 WA115690 6 90-5 WA115998 .. 70-73
WA113706 18 20-45 WA115740 1 20-19 WA115999 1 70-57
WA113716 17 20-43 WA115748 11 70-13 WA115999 .. 70-73
WA113716 16 20-45 WA115748 11 70-17 WA116000 6 70-57
WA113719 16 20-43 WA115748 4 70-21 WA116000 .. 70-73
WA113719 18 20-45 WA115749 13 70-17 WA116001 6 70-51
WA113724 17 20-45 WA115750 3 70-21 WA116004 5 70-51
WA113732 1 20-17 WA115766 10 70-21 WA116007 1 70-65
WA113739 10 20-23 WA115767 15 70-21 WA116007 .. 70-73
WA113741 10 20-23 WA115767 11 70-43 WA116009 .. 70-73
WA113805 12 20-43 WA115768 14 70-17 WA116010 2 70-45
WA113907 12 40-21 WA115768 11 70-21 WA116010 .. 70-73
WA113967 2 50-3 WA115768 10 70-43 WA116011 2 70-47
WA113967 24 50-3 WA115777 13 20-23 WA116011 .. 70-73
WA113967 5 50-7 WA115777 18 20-53 WA116012 1 70-47
WA114028 9 20-23 WA115777 12 70-17 WA116012 .. 70-74
WA114340 1 20-29 WA115777 5 70-21 WA116013 1 70-53
WA114349 3 20-55 WA115779 6 50-15 WA116013 .. 70-74
WA114371 3 20-33 WA115804 32 70-19 WA116014 3 70-53
WA114372 6 20-33 WA115804 17 70-21 WA116014 .. 70-74
WA114379 1 20-27 WA115809 11 70-11 WA116015 2 70-53
WA114380 1 20-27 WA115810 6 70-11 WA116015 .. 70-74
WA114384 9 20-25 WA115929 6 70-41 WA116016 .. 70-74
WA114386 16 20-25 WA115930 25 20-25 WA116017 4 50-51
WA114388 24 20-25 WA115933 1 70-3 WA116017 4 50-53
WA114391 12 20-25 WA115959 8 20-43 WA116017 4 50-55
WA114406 3 20-27 WA115976 1 90-5 WA116017 .. 70-74
WA114406 7 90-3 WA115978 5 70-67 WA116018 2 70-65
WA114407 4 20-27 WA115978 2 70-71 WA116018 .. 70-74
WA114407 7 90-3 WA115978 .. 70-73 WA116019 1 70-49
WA114457 1 20-45 WA115979 1 70-65 WA116019 .. 70-74
WA114457 12 40-11 WA115979 .. 70-73 WA116020 3 70-49
WA114457 11 40-27 WA115980 4 70-65 WA116020 .. 70-74
WA114768 12 70-11 WA115980 .. 70-73 WA116021 2 70-49
WA114768 14 70-31 WA115981 3 70-65 WA116021 .. 70-74

100-6 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)

PN=262
 100-7
WARATAH HTH616C HARVESTER
NUMERICAL INDEX - CONTINUED

PART NO. KEY PAGE PART NO. KEY PAGE PART NO. KEY PAGE
WA116022 .. 70-74 WA116299 1 50-43 WA116452 4 70-51
WA116023 3 70-65 WA116299 .. 50-45 WA116452 .. 70-75
WA116023 .. 70-74 WA116302 2 50-37 WA116453 3 70-51
WA116024 2 70-65 WA116302 .. 50-45 WA116453 .. 70-75
WA116024 .. 70-74 WA116304 4 20-51 WA116454 2 70-51
WA116026 4 70-69 WA116314 1 50-3 WA116454 .. 70-75
WA116026 .. 70-74 WA116321 2 20-49 WA116455 1 70-55
WA116027 3 70-69 WA116323 1 70-63 WA116455 .. 70-75
WA116027 .. 70-74 WA116323 .. 70-74 WA116456 3 70-45
WA116028 5 70-55 WA116324 4 70-63 WA116456 .. 70-75
WA116028 .. 70-74 WA116324 .. 70-74 WA116461 7 50-29
WA116033 5 20-27 WA116325 1 70-67 WA116461 .. 50-35
WA116036 19 70-21 WA116325 2 70-67 WA116464 1 50-29
WA116037 8 70-25 WA116325 3 70-67 WA116464 .. 50-34
WA116037 8 70-27 WA116325 1 70-69 WA116465 2 50-29
WA116047 13 70-7 WA116325 5 70-69 WA116465 .. 50-34
WA116048 7 70-7 WA116325 .. 70-74 WA116466 2 50-31
WA116051 3 20-43 WA116326 2 70-63 WA116466 .. 50-34
WA116052 20 20-31 WA116326 .. 70-74 WA116467 4 50-29
WA116053 10 20-53 WA116327 3 70-63 WA116467 .. 50-34
WA116054 1 70-9 WA116327 .. 70-74 WA116468 5 50-29
WA116061 2 20-17 WA116328 5 70-63 WA116468 .. 50-34
WA116061 2 20-19 WA116328 .. 70-75 WA116487 3 50-29
WA116062 3 70-3 WA116329 1 50-51 WA116487 .. 50-35
WA116062 3 70-5 WA116329 1 50-53 WA116488 3 50-27
WA116066 19 20-31 WA116329 1 50-55 WA116488 .. 50-34
WA116067 18 20-31 WA116329 .. 70-75 WA116489 1 50-31
WA116068 13 20-41 WA116331 2 70-61 WA116489 .. 50-34
WA116069 10 20-41 WA116331 .. 70-75 WA116490 3 50-31
WA116087 .. 80-3 WA116332 3 70-57 WA116490 .. 50-34
WA116160 4 20-43 WA116332 .. 70-75 WA116491 2 50-27
WA116162 2 50-17 WA116334 4 70-61 WA116491 .. 50-35
WA116165 20 20-25 WA116334 .. 70-75 WA116492 1 50-27
WA116175 22 20-25 WA116335 5 70-61 WA116492 .. 50-34
WA116177 22 20-31 WA116335 .. 70-75 WA116497 8 20-17
WA116177 9 20-43 WA116336 23 20-13 WA116497 5 20-19
WA116177 11 20-53 WA116338 3 20-13 WA116497 21 20-31
WA116178 23 20-31 WA116339 10 40-27 WA116497 19 20-43
WA116178 10 20-43 WA116340 2 70-55 WA116497 17 20-53
WA116178 12 20-53 WA116340 7 70-55 WA116498 5 70-25
WA116179 10 20-31 WA116340 .. 70-75 WA116498 5 70-27
WA116179 11 20-43 WA116341 3 70-55 WA116498 5 70-29
WA116179 13 20-53 WA116341 .. 70-75 WA116501 7 70-25
WA116192 8 50-17 WA116344 1 90-5 WA116501 7 70-27
WA116229 4 20-51 WA116345 1 90-5 WA116501 7 70-29
WA116251 10 70-25 WA116346 1 90-5 WA116504 4 70-25
WA116251 10 70-27 WA116347 1 90-5 WA116504 4 70-27
WA116253 6 70-17 WA116348 1 90-5 WA116504 4 70-29
WA116254 10 70-29 WA116349 1 90-5 WA116506 6 70-25
WA116255 9 70-25 WA116351 4 20-31 WA116506 6 70-27
WA116255 9 70-27 WA116351 18 20-43 WA116506 6 70-29
WA116257 8 70-29 WA116351 16 20-53 WA116545 0 30-11
WA116263 1 50-17 WA116352 17 20-31 WA116546 17 30-11
WA116269 9 40-27 WA116352 0 20-35 WA116605 1 70-5
WA116278 5 20-23 WA116353 16 20-31 WA116613 34 70-19
WA116280 0 30-13 WA116353 9 20-35 WA116614 35 70-19
WA116283 2 30-13 WA116354 2 20-27 WA116614 19 70-43
WA116285 1 30-13 WA116367 .. 70-75 WA116615 39 70-19
WA116288 18 70-43 WA116415 1 20-51 WA116638 18 70-21
WA116289 1 50-21 WA116415 3 20-51 WA116639 3 30-5
WA116290 3 50-21 WA116420 15 70-15 WA116644 7 30-5
WA116295 6 50-29 WA116429 6 20-41 WA116644 10 30-9
WA116295 .. 50-35 WA116431 7 20-41 WA116644 16 30-11
WA116296 1 50-33 WA116431 14 70-43 WA116644 7 30-13
WA116296 .. 50-35 WA116450 4 70-57 WA116686 16 70-13
WA116298 10 20-27 WA116450 .. 70-75 WA116719 2 70-25
WA116298 4 90-3 WA116452 1 70-51 WA116719 2 70-27

WARATAH HTH616C HARVESTER PC10314 (24-NOV-10) 100-7

PN=263
 100-8
WARATAH HTH616C HARVESTER
NUMERICAL INDEX - CONTINUED

PART NO. KEY PAGE PART NO. KEY PAGE PART NO. KEY PAGE
WA116720 5 70-55 WA118601 1 50-39
WA116720 .. 70-75 WA118601 .. 50-44
WA116731 11 20-27 WA118602 2 50-41
WA116742 3 70-47 WA118602 .. 50-44
WA116743 2 70-19 WA118603 4 50-39
WA116743 6 70-31 WA118603 .. 50-44
WA116743 6 70-33 WA118604 2 50-39
WA116745 3 70-61 WA118605 5 50-39
WA116745 .. 70-75 WA118605 .. 50-44
WA116746 3 70-59 WA118606 3 50-37
WA116746 .. 70-75 WA118606 .. 50-44
WA116747 1 70-61 WA118607 1 50-41
WA116747 .. 70-75 WA118607 .. 50-44
WA116748 6 70-63 WA118608 3 50-39
WA116748 .. 70-75 WA118608 .. 50-45
WA116749 .. 70-75 WA118717 9 70-13
WA116750 6 70-67 WA118717 8 70-15
WA116759 16 20-31 WA118717 9 70-17
WA116759 9 20-33 WA118717 13 70-25
WA116760 17 20-31 WA118717 13 70-27
WA116760 0 20-33 WA118717 12 70-29
WA116780 22 70-21 WA118866 20 50-11
WA116793 16 70-19 WA118876 20 20-11
WA116814 10 40-3 WA118876 20 20-13
WA117029 10 50-19 WA118928 4 90-5
WA117029 7 50-21 WA118931 3 90-5
WA117029 8 50-21 WA118932 2 90-5
WA117041 17 20-11 WA118933 5 90-5
WA117041 17 20-13 WA118937 3 90-5
WA117091 15 70-43 WA118952 18 20-23
WA117095 4 70-43 WA118952 24 20-41
WA117145 5 20-25 WA118952 23 20-53
WA117169 21 20-53 WA118952 15 70-17
WA117263 1 70-45 WA118952 7 70-21
WA117265 20 20-25 WA118952 1 70-43
WA117265 12 20-45 WA118953 5 90-5
WA117281 22 20-25 WA118954 6 90-5
WA117287 27 20-25 WA118955 5 90-5
WA117288 15 20-27 WA118956 6 90-5
WA117289 25 20-25 WA118957 5 90-5
WA117290 12 50-19 WA118958 6 90-5
WA117291 12 20-45 WA118959 5 90-5
WA117294 9 50-19 WA118960 6 90-5
WA117297 6 70-23 WA118961 6 90-5
WA117300 13 70-13 WA118971 17 70-15
WA117307 12 70-31 WA119012 4 70-61
WA117307 12 70-33 WA119012 .. 70-75
WA117307 9 70-35 WA119013 4 70-59
WA117307 9 70-37 WA119013 .. 70-75
WA117360 41 70-19 WA119014 3 70-45
WA117360 10 70-23 WA119014 .. 70-75
WA117432 5 70-13 WA119072 8 70-31
WA117432 5 70-15 WA119072 8 70-33
WA117432 5 70-17 WA119072 11 70-35
WA117435 3 20-51 WA119072 11 70-37
WA117752 13 40-11 13P1016 8 20-37
WA117841 13 70-21 840080100 18 70-11
WA117975 16 50-11
WA117976 17 50-11
WA118118 18 50-11
WA118362 14 70-21
WA118406 6 50-7
WA118408 12 70-21
WA118449 1 50-47
WA118526 19 50-11
WA118600 1 50-37
WA118600 .. 50-44

100-8 WARATAH HTH616C HARVESTER PC10314 (24-NOV-10)

PN=264