IP Camera

HW0036

Wanscam

Shenzhen Wanscam Technology Co., Ltd

Downloaded from www.Manualslib.com manuals search engine

 Packaging list:

Note:Some camera models don’t have separate antenna(fixed)

Installation procedures:

Begin

Connect Hardwares

Install the Search Tool

Login the IP Camera in Lan

Wireless Settings Login the IP Camera On PC

Client

Access By Mobile

End

Note:For the first time use IP Camera,please refer to the procedures

Downloaded from www.Manualslib.com manuals search engine

 above

Connect the Camera with Internet cable and power accordingly as above

2.Install the Search Tool

Open the CD,Install the following software:

1. Open the File “JW & HW series”-”Browser View”:

Click “OCX setup”—“Next”—“Install”—“Finish”

Downloaded from www.Manualslib.com manuals search engine

 2. Open the File “JW & HW series”-”Browser View”:

Copy “Search Tool ” to desktop and run it

3. E-View7 App Installation

APP Download

Please Download and install the E-view7 APP before you set up the
IP Camera. Search on Google Play store or APP Store for “E-view7”

One Key Setting Function (cell phone must be connected to the WiFi. ）

Step1.Connect the camera with power adaptor (you do not need to connect
the Ethernet cable).

Step2.Launch the APP, tap on “+” to access the “Add Camera” function, then
click on “One Key Setting”, and the screen shown below will appear:

Downloaded from www.Manualslib.com manuals search engine

 1

Step3.Enter the correct WiFi password, then click on “Start configuration”, like
shown in the screen below:

2 3
Step4. Wait for 60 seconds, then choose the respective device and enter the
password. If done, click on save to connect to the WiFi.

Three methods to add IP camera

Downloaded from www.Manualslib.com manuals search engine

 Method 1:Input the P2P ID, User name, Password of your camera manually.
Then click “Save”

Method 2:Scan the QR code:Click the “Scan QR code” button,at the bottom of
the camera, there is a label of QR Code, then scan the QR code with your
smart phone,it will show the ID, input the user name and password, then click
“Save ”

Method 3:Click “Search”, then you will get the local camera list in your phone.
Choose the camera which you want to view, input the user name and
password, then click “Save”

Then the video will be showed,refer to picture 7

Click the “!” In the red circle,the camera settings are available,refer to picture 8

7 8

Open the WiFi settings,showed as Picture 9

choose the correct SSID,and input the password,like picture 10

Downloaded from www.Manualslib.com manuals search engine

 9 10

After wifi connection, the camera will be rebooting,

You will find the camera online after 3-5 minutes

The video will be showed wirelessly,refer to Picture 11and 12

11 12

4. Login IP Camera In LAN

After hardwares connection properly, run the search tool, the Camera IP Address will

Downloaded from www.Manualslib.com manuals search engine

 be showed automatically.（Before viewing camera on IE, you must set One Key
Setting）

Note:If the Search Tool shows subnet mask does not match,please click

Double click the camera IP address in the search tool.

A Sign-in interface will be showed on your default browser, like the below:

Note: username is “admin”;password is none

(Please change the account info for safety after login)

The login screen will be showed after the correct user name and password input

Downloaded from www.Manualslib.com manuals search engine

 Note: If the OCX installed before,then login directly

A. Click “OCX” to download and Install it.

B. Refresh the webpage and login again,the camera video will be displayed as
below

Live video

5.Device imformation Setting

Downloaded from www.Manualslib.com manuals search engine

 1).Click , access the “ Device imformation” settings
2)Checking the imformation of the ipcamera

6.Alias setting

The display name of the camera

Downloaded from www.Manualslib.com manuals search engine

 7.Time Setting

1).Click , access the “time” setting

2)You can choose the NTP server you want,and click “Apply”

3)Choose the time zone you want,click “Apply”,you can get it

8.Record setting
1

Downloaded from www.Manualslib.com manuals search engine

  Record & Capture Path: Where to store the files, video and photos. (If you can’t choose
this, pay attention to your PC OS and IE version, please use the IE browser.)

 Record file length: At least 100MB

 Record time length: At least 5 minutes.

 Reserved disk space: If your pc disk space is less than 200MB, stop recording.

 Record cover: Delete the old files when the disk capacity is almost depleted.

Note :If you can not change the recording path, please follow these steps:

First，please open search tool,Find the camera's ip address :

Then,Run IE browser as administrator :

Downloaded from www.Manualslib.com manuals search engine

 Finally, Paste IP address of the camera in IE browser, Click “Enter” and find the below page
then you can modify the video path :

9.Record Schedule

This section explains the SD card recording settings. If the SD card has been inserted, the
capacity of the card will be displayed. But at first, you need to format it. It includes: Record
coverage, Record time, Timer recording. The settings are like follows:

Downloaded from www.Manualslib.com manuals search engine

 Record coverage: Delete old files when the SD card is nearly full.
Record time: Create a video file every 10 minutes.
Timer recording: Set the time, select all, store recording to the SD card.

You can playback the video online with IE browser. Press the “Enter” button, choose the last

sign in code:

Downloaded from www.Manualslib.com manuals search engine

 10.Mail Service Settings and Alarm Service Settings

1). The Mail service settings are a requirement for the alarm function. If your camera will
be activated it will send you an email with photos attached. For this, you must assure
that the mail service is configured correctly and successfully tested.
Here an example for Gmail.

It will send an email if the camera is activated.

Downloaded from www.Manualslib.com manuals search engine

 You must enter the following information:
Sender: Enter your email address
Receiver: Enter your email address or a different email address
SMTP user: Enter the email username
SMTP password: Enter your email password

Note: This function only works if the IP camera is accessed via the network. If you use Gmail,
the port should be configured as 465, SSL should be TLS. The most important, make sure
that your Gmail has SMTP enabled.

After first test email,you will receive an email from google with an login attemt.

Option 2 :
Change your setting to allow less secure apps to access your account,follow these steps :
1.Go to the “Less secure apps ”section in my account.
2.Next to “Access for less secure apps”,select Turn on.(Note to Google Apps users :This
setting is hidden if your administrator has locked less secure app account access)
3.More details about allow less secure apps ,please refer to this link :
https://support.google.com/a/answer/6260879?hl=en.

It will send you a notification as soon the camera will be activated (depends on the model)
Alarm Service Settings, please use the same settings like in the screenshot below:

If you let the camera page (browser) on, if the come will be activated, 1 minute will be
recorded.

Downloaded from www.Manualslib.com manuals search engine

 11.Ftp service setting and system Log

FTP setting:

1). The Alarm log is provided for administrators to monitor the alarm events

Downloaded from www.Manualslib.com manuals search engine

 12.Basic Network Settings & wireless

1)You may modify the network Settings of IP address and gateway, and the port number

Downloaded from www.Manualslib.com manuals search engine

 Wireless Setting

1).Click , access the “Wireless” settings

2).Search the WIFI signals and choose the SSID you want
3).Make sure all the parameters are the same as your router, input the WIFI network
key.
5).Click “check”, after 30seconds,one notification will show you if the WIFI settings
succeed
6)If succeed, just go back to select “Apply”, then disconnect the network cable

Note:If the camera IP Address can not be found on the search tool.please
connect the internet cable again to check the WIFI settings

Checking the WIFI signal connection situation

Downloaded from www.Manualslib.com manuals search engine

 13.Rtsp&Onvif
1)Support onvif function and Rtsp function

14.PTZ setting

Through setting to set some PTZ function

Downloaded from www.Manualslib.com manuals search engine

 15.User Setting & Multi-Device Setting

1) Modification of the user password

2) Refresh the device in LAN search to find add another camera

3) Click on “the 2nd device” or any other device
4) Click on the LAN equipment added in the search, enter the user name and password
5) Click on “Submit”

Downloaded from www.Manualslib.com manuals search engine

 16.Upgrade Device Firmware

2). With this option you may reboot the camera, restore it to the factory settings, and
upgrade the system.

17.Access By Mobile

E-View7 App Installation

A. For IOS (iPhone/iPad),download App “E-view7” in App Store;

For Android phones, download App “E-view7” in Google Play, our official website or
you can get it from CD Path:”JW & HW Series”-”Mobile App”.

B. Also support scan the App QR-code in the user manual to download directly.

Mobile View

A.Run the App ,please refer to picture 1

B.Add the Camera,please refer to picture 2

Downloaded from www.Manualslib.com manuals search engine

 1. 2.

Three methods to add IP camera:

Method 1:Input the P2P ID, User name, Password of your camera manually. Then
click “Save”
Method 2:Scan the QR code:Click the “Scan QR code” button,at the bottom of the
camera, there is a label of QR Code, then scan the QR code with your smart phone,it
will show the ID, input the user name and password, then click “Save ”
Method 3:Click “Search”, then you will get the local camera list in your phone. Choose
the camera which you want to view, input the user name and password, then click
“Save”
Method 4:Click”One key setting”,enter the correct SSID and Password,Click”start
Configuration”

The operation interface:

A.Device List

Downloaded from www.Manualslib.com manuals search engine

 B.Live video

7.FAQ :

A.Forget the password

1)Reset your camera, you should press the RESET button for 10 seconds when the

power is on(for indoor camera,it’s on the bottom of the camera, for outdoor camera ,

the white reset button is at the end of the power cable).

2)Finishing reset, the camera will restore to factory settings, the user name

is”admin”and password is none.

B.No video shown on browser only black screen

Note:If there is still no live video after run OCX ActiveX,please try to enable the
ActiveX options of IE security settings, please do the follow steps:

Downloaded from www.Manualslib.com manuals search engine

 1.Close the firewall of your computer.

2.Change the ActiveX settings,“IE” browser > “Tool” > “Internet Options” > “Security”>

“Custom Level” > “ActiveX control and Plug-ins”,all the ActiveX options set to be

“Enable”:

Especially:

Enable:Download unsigned ActiveX controls

Enable:Initialize and script ActiveX controls not marked as safe

Enable:Run ActiveX controls and plug-ins

a.

Downloaded from www.Manualslib.com manuals search engine

 b.

Downloaded from www.Manualslib.com manuals search engine

 FCC Warning:

This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by

manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.

To comply with FCC RF exposure compliance requirements,this grant isapplicable to

only mobile configurations. The antennas used for this transmittermust be installed to
provide a separation distance of at least 20 cm from allpersons and must not be co-l
ocated or operating in conjunction with any otherantenna or transmitter.

Downloaded from www.Manualslib.com manuals search engine